arch: add support for OpenRISC architecture

PATCH New Waldemar Brodkorb 3 participants 4 messages Jan 7, 2017 – Jan 24, 2017 Kbuild

Share & tools

Waldemar Brodkorb

author

2017-01-07 08:48 UTC #0 lore raw

PATCH 1/1 arch: add support for OpenRISC architecture

Add a sample defconfig which can be used to create a system for Qemu. Openrisc community is getting more active recently and tries to add missing patches upstream to gcc/gdb.

Signed-off-by Waldemar Brodkorb <[email protected]>

---
 Makefile                                     |  1 +
 arch/Config.in                               | 11 +++++++++++
 arch/Config.in.or1k                          |  5 +++++
 board/qemu/or1k/linux-4.9.config             | 29 ++++++++++++++++++++++++++++
 board/qemu/or1k/patches/linux/kallsyms.patch | 24 +++++++++++++++++++++++
 board/qemu/or1k/patches/linux/ld-or1k.patch  | 12 ++++++++++++
 board/qemu/or1k/readme.txt                   |  9 +++++++++
 configs/qemu_or1k_defconfig                  | 22 +++++++++++++++++++++
 package/gcc/Config.in.host                   | 15 +++++++++++---
 package/gcc/gcc.hash                         |  2 ++
 package/gcc/gcc.mk                           |  6 ++++--
 package/uclibc/Config.in                     |  5 +++--
 toolchain/toolchain-buildroot/Config.in      |  8 ++++----
 13 files changed, 138 insertions(+), 11 deletions(-)
 create mode 100644 arch/Config.in.or1k
 create mode 100644 board/qemu/or1k/linux-4.9.config
 create mode 100644 board/qemu/or1k/patches/linux/kallsyms.patch
 create mode 100644 board/qemu/or1k/patches/linux/ld-or1k.patch
 create mode 100644 board/qemu/or1k/readme.txt
 create mode 100644 configs/qemu_or1k_defconfig

Makefile +1 -0

index b80b9e1..b99996e 100644
@@ -420,6 +420,7 @@ KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
 	-e s/arm.*/arm/ -e s/sa110/arm/ \
 	-e s/aarch64.*/arm64/ \
 	-e s/bfin/blackfin/ \
+	-e s/or1k/openrisc/ \
 	-e s/parisc64/parisc/ \
 	-e s/powerpc64.*/powerpc/ \
 	-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \

arch/Config.in +11 -0

index d59cbd7..7149b2c 100644
@@ -159,6 +159,13 @@ config BR2_nios2
 	  http://www.altera.com/
 	  http://en.wikipedia.org/wiki/Nios_II
 
+config BR2_or1k
+	bool "OpenRISC"
+	select BR2_ARCH_HAS_MMU_MANDATORY
+	help
+	  OpenRISC is a free and open processor for embedded system.
+	  http://openrisc.io
+
 config BR2_powerpc
 	bool "PowerPC"
 	select BR2_ARCH_HAS_MMU_MANDATORY

@@ -378,6 +385,10 @@ if BR2_nios2
 source "arch/Config.in.nios2"
 endif
 
+if BR2_or1k
+source "arch/Config.in.or1k"
+endif
+
 if BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le
 source "arch/Config.in.powerpc"
 endif

arch/Config.in.or1k new file +5 -0

new file mode 100644
index 0000000..dba64a6
@@ -0,0 +1,5 @@
+config BR2_ARCH
+	default "or1k"
+
+config BR2_ENDIAN
+	default "BIG"

board/qemu/or1k/linux-4.9.config new file +29 -0

new file mode 100644
index 0000000..5ba03c3
@@ -0,0 +1,29 @@
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
+CONFIG_OPENRISC_BUILTIN_DTB="or1ksim"
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_ETHOC=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_USB_SUPPORT is not set

board/qemu/or1k/patches/linux/kallsyms.patch new file +24 -0

new file mode 100644
index 0000000..fe6f9c0
@@ -0,0 +1,24 @@
+From: https://lkml.org/lkml/2016/12/31/13
+
+The build robot reports:
+
+   .tmp_kallsyms1.o: In function `kallsyms_relative_base':
+>> (.rodata+0x8a18): undefined reference to `_text'
+
+This is when using 'make alldefconfig'. Adding this _text symbol to mark
+the start of the kernel as in other architecture fixes this.
+
+Signed-off-by: Stafford Horne <[email protected]>
+
+diff -Nur linux-4.9.orig/arch/openrisc/kernel/vmlinux.lds.S linux-4.9/arch/openrisc/kernel/vmlinux.lds.S
+--- linux-4.9.orig/arch/openrisc/kernel/vmlinux.lds.S	2016-12-11 20:17:54.000000000 +0100
++++ linux-4.9/arch/openrisc/kernel/vmlinux.lds.S	2017-01-01 12:13:43.039107518 +0100
+@@ -38,6 +38,8 @@
+         /* Read-only sections, merged into text segment: */
+         . = LOAD_BASE ;
+ 
++	_text = .;
++
+ 	/* _s_kernel_ro must be page aligned */
+ 	. = ALIGN(PAGE_SIZE);
+ 	_s_kernel_ro = .;

board/qemu/or1k/patches/linux/ld-or1k.patch new file +12 -0

new file mode 100644
index 0000000..264f916
@@ -0,0 +1,12 @@
+diff -Nur linux-4.4.5.orig/arch/openrisc/kernel/vmlinux.lds.S linux-4.4.5/arch/openrisc/kernel/vmlinux.lds.S
+--- linux-4.4.5.orig/arch/openrisc/kernel/vmlinux.lds.S	2016-03-10 00:35:58.000000000 +0100
++++ linux-4.4.5/arch/openrisc/kernel/vmlinux.lds.S	2016-03-16 09:21:07.933535532 +0100
+@@ -30,7 +30,7 @@
+ #include <asm/cache.h>
+ #include <asm-generic/vmlinux.lds.h>
+ 
+-OUTPUT_FORMAT("elf32-or32", "elf32-or32", "elf32-or32")
++OUTPUT_FORMAT("elf32-or1k", "elf32-or1k", "elf32-or1k")
+ jiffies = jiffies_64 + 4;
+ 
+ SECTIONS

board/qemu/or1k/readme.txt new file +9 -0

new file mode 100644
index 0000000..53c66ad
@@ -0,0 +1,9 @@
+Run the emulation with:
+
+ qemu-system-or32 -kernel output/images/vmlinux -nographic
+
+The login prompt will appear in the terminal that started Qemu.
+
+Ethernet support is not working, yet.
+
+Tested with QEMU 2.8.0.

configs/qemu_or1k_defconfig new file +22 -0

new file mode 100644
index 0000000..111afc2
@@ -0,0 +1,22 @@
+# Architecture
+BR2_or1k=y
+
+# System
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+
+# Patches
+BR2_GLOBAL_PATCH_DIR="board/qemu/or1k/patches"
+
+# Filesystem
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_ROOTFS_INITRAMFS=y
+
+# Linux headers same as kernel, a 4,9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/or1k/linux-4.9.config"

package/gcc/Config.in.host +12 -3

index d8fbc18..eb41aa4 100644
@@ -3,6 +3,7 @@ comment "GCC Options"
 choice
 	prompt "GCC compiler Version"
 	default BR2_GCC_VERSION_ARC if BR2_arc
+	default BR2_GCC_VERSION_OR1K if BR2_or1k
 	default BR2_GCC_VERSION_5_X
 	help
 	  Select the version of gcc you wish to use.

@@ -10,7 +11,7 @@ choice
 	config BR2_GCC_VERSION_4_8_X
 		bool "gcc 4.8.x"
 		# Broken or unsupported architectures
-		depends on !BR2_microblaze && !BR2_arc \
+		depends on !BR2_microblaze && !BR2_arc && !BR2_or1k \
 			&& !BR2_powerpc64le && !BR2_nios2 && !BR2_bfin
 		# Broken or unsupported ARM cores
 		depends on !BR2_cortex_a12 && !BR2_cortex_a17 && !BR2_ARM_CPU_ARMV8

@@ -36,10 +37,16 @@ choice
 		depends on BR2_arc
 		select BR2_TOOLCHAIN_GCC_AT_LEAST_6
 
+	config BR2_GCC_VERSION_OR1K
+		bool "gcc or1k (5.x)"
+		# Only supported architecture
+		depends on BR2_or1k
+		select BR2_TOOLCHAIN_GCC_AT_LEAST_5
+
 	config BR2_GCC_VERSION_4_9_X
 		bool "gcc 4.9.x"
 		# Broken or unsupported architectures
-		depends on !BR2_arc && !BR2_bfin
+		depends on !BR2_arc && !BR2_bfin && !BR2_or1k
 		# Broken or unsupported ARM cores
 		depends on !BR2_cortex_a17 && !BR2_cortex_a72
 		# Unsupported MIPS cores

@@ -60,7 +67,7 @@ choice
 	config BR2_GCC_VERSION_5_X
 		bool "gcc 5.x"
 		# Broken or unsupported architectures
-		depends on !BR2_arc && !BR2_bfin
+		depends on !BR2_arc && !BR2_bfin && !BR2_or1k
 		# musl ppc64 unsupported
 		depends on !(BR2_TOOLCHAIN_USES_MUSL && (BR2_powerpc64 || BR2_powerpc64le))
 		# Unsupported MIPS cores

@@ -75,6 +82,7 @@ choice
 		# Broken or unsupported architectures
 		depends on !BR2_arc
 		depends on !BR2_microblaze
+		depends on !BR2_or1k
 		# Unsupported MIPS cores
 		depends on !BR2_mips_m6250 && !BR2_mips_p6600
 		select BR2_TOOLCHAIN_GCC_AT_LEAST_6

@@ -99,6 +107,7 @@ config BR2_GCC_VERSION
 	default "5.4.0"     if BR2_GCC_VERSION_5_X
 	default "6.3.0"     if BR2_GCC_VERSION_6_X
 	default "arc-2016.09-release" if BR2_GCC_VERSION_ARC
+	default "musl-5.4.0" if BR2_GCC_VERSION_OR1K
 
 config BR2_EXTRA_GCC_CONFIG_OPTIONS
 	string "Additional gcc options"

package/gcc/gcc.hash +2 -0

index 1988237..4376db4 100644
@@ -13,3 +13,5 @@ sha512  234dd9b1bdc9a9c6e352216a7ef4ccadc6c07f156006a59759c5e0e6a69f0abcdc14630e
 
 # Locally calculated (fetched from Github)
 sha512  faae6dc3f7843412068a52de5919797cd23e6ed1b8d140c230d0381f13fd38af67baaa4a09e581c03602127da3dd2fab6f9f5d7ac5d4270585bd079c673dda9a  gcc-arc-2016.09-release.tar.gz
+# Locally calculated (fetched from Github)
+sha512  841101f7de45f327bf2e92f3efc73ca88a021e4b9b541458ce80a16e55882bd8606a8492d75c57c589ee2c10d42ae2865b67690155d7289a541df1d68096402f  gcc-musl-5.4.0.tar.gz

package/gcc/gcc.mk +4 -2

index 464e4c9..7b7a5cf 100644
@@ -13,11 +13,13 @@ GCC_VERSION = $(call qstrip,$(BR2_GCC_VERSION))
 ifeq ($(BR2_arc),y)
 GCC_SITE = $(call github,foss-for-synopsys-dwc-arc-processors,gcc,$(GCC_VERSION))
 GCC_SOURCE = gcc-$(GCC_VERSION).tar.gz
+else ifeq ($(BR2_or1k),y)
+GCC_SITE = $(call github,openrisc,or1k-gcc,$(GCC_VERSION))
+GCC_SOURCE = gcc-$(GCC_VERSION).tar.gz
 else
 GCC_SITE = $(BR2_GNU_MIRROR:/=)/gcc/gcc-$(GCC_VERSION)
-endif
-
 GCC_SOURCE ?= gcc-$(GCC_VERSION).tar.bz2
+endif
 
 #
 # Xtensa special hook

package/uclibc/Config.in +3 -2

index a200154..4d5f629 100644
@@ -57,12 +57,12 @@ choice
 		select BR2_TOOLCHAIN_HAS_THREADS
 		select BR2_TOOLCHAIN_HAS_THREADS_NPTL
 		depends on BR2_USE_MMU
-		depends on !BR2_m68k && !BR2_microblaze
+		depends on !BR2_m68k && !BR2_microblaze && !BR2_or1k
 
 	config BR2_PTHREADS
 		bool "linuxthreads"
 		select BR2_TOOLCHAIN_HAS_THREADS
-		depends on BR2_bfin || BR2_m68k || BR2_microblaze || BR2_arm || BR2_armeb || BR2_xtensa
+		depends on BR2_bfin || BR2_m68k || BR2_microblaze || BR2_or1k || BR2_arm || BR2_armeb || BR2_xtensa
 
 	config BR2_PTHREADS_NONE
 		bool "none"

@@ -106,6 +106,7 @@ config BR2_UCLIBC_TARGET_ARCH
 	default "m68k"	   if BR2_m68k
 	default "microblaze"   if BR2_microblaze
 	default "mips"	   if BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
+	default "or1k"     if BR2_or1k
 	default "powerpc"  if BR2_powerpc
 	default "sh"	   if BR2_sh
 	default "sparc"	   if BR2_sparc

toolchain/toolchain-buildroot/Config.in +2 -2

index c8436cc..d5f98a9 100644
@@ -32,8 +32,8 @@ config BR2_TOOLCHAIN_BUILDROOT_UCLIBC
 	depends on BR2_arcle   || BR2_arceb  || BR2_arm    || BR2_armeb    || \
 		   BR2_bfin    || BR2_i386   || BR2_m68k   || BR2_microblaze || \
 		   BR2_mips    || BR2_mipsel || BR2_mips64 || BR2_mips64el || \
-		   BR2_powerpc || BR2_sh2a   || BR2_sh4	   || BR2_sh4eb    || \
-		   BR2_sparc   || BR2_xtensa || BR2_x86_64
+		   BR2_or1k    || BR2_powerpc || BR2_sh2a   || BR2_sh4	   || \
+		   BR2_sh4eb   || BR2_sparc   || BR2_xtensa || BR2_x86_64
 	# Unsupported for MIPS R6
 	depends on !BR2_MIPS_CPU_MIPS32R6 && !BR2_MIPS_CPU_MIPS64R6
 	help

Signature · 1 line

2.1.4

Romain Naour

2017-01-07 23:09 UTC #1 lore raw

PATCH 1/1 arch: add support for OpenRISC architecture

Hi Waldemar,

Le 07/01/2017 ? 09:48, Waldemar Brodkorb a ?crit :

Quoted 3 lines

Add a sample defconfig which can be used to create a system for Qemu. Openrisc community is getting more active recently and tries to add missing patches upstream to gcc/gdb.

I'm wondering if all Binutils version (2.25.1, 2.26.1 and 2.27) can be used on openRISC? Have you considered to use the openrisc fork [1] ?

[1] https://github.com/openrisc/binutils-gdb

board/qemu/or1k/patches/linux/kallsyms.patch

Quoted 116 lines

Signed-off-by Waldemar Brodkorb <[email protected]>

---
 Makefile                                     |  1 +
 arch/Config.in                               | 11 +++++++++++
 arch/Config.in.or1k                          |  5 +++++
 board/qemu/or1k/linux-4.9.config             | 29 ++++++++++++++++++++++++++++
 board/qemu/or1k/patches/linux/kallsyms.patch | 24 +++++++++++++++++++++++
 board/qemu/or1k/patches/linux/ld-or1k.patch  | 12 ++++++++++++
 board/qemu/or1k/readme.txt                   |  9 +++++++++
 configs/qemu_or1k_defconfig                  | 22 +++++++++++++++++++++
 package/gcc/Config.in.host                   | 15 +++++++++++---
 package/gcc/gcc.hash                         |  2 ++
 package/gcc/gcc.mk                           |  6 ++++--
 package/uclibc/Config.in                     |  5 +++--
 toolchain/toolchain-buildroot/Config.in      |  8 ++++----
 13 files changed, 138 insertions(+), 11 deletions(-)
 create mode 100644 arch/Config.in.or1k
 create mode 100644 board/qemu/or1k/linux-4.9.config
 create mode 100644 board/qemu/or1k/patches/linux/kallsyms.patch
 create mode 100644 board/qemu/or1k/patches/linux/ld-or1k.patch
 create mode 100644 board/qemu/or1k/readme.txt
 create mode 100644 configs/qemu_or1k_defconfig

Makefile +1 -0

index b80b9e1..b99996e 100644
@@ -420,6 +420,7 @@ KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
 	-e s/arm.*/arm/ -e s/sa110/arm/ \
 	-e s/aarch64.*/arm64/ \
 	-e s/bfin/blackfin/ \
+	-e s/or1k/openrisc/ \
 	-e s/parisc64/parisc/ \
 	-e s/powerpc64.*/powerpc/ \
 	-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \

arch/Config.in +11 -0

index d59cbd7..7149b2c 100644
@@ -159,6 +159,13 @@ config BR2_nios2
 	  http://www.altera.com/
 	  http://en.wikipedia.org/wiki/Nios_II
 
+config BR2_or1k
+	bool "OpenRISC"
+	select BR2_ARCH_HAS_MMU_MANDATORY
+	help
+	  OpenRISC is a free and open processor for embedded system.
+	  http://openrisc.io
+
 config BR2_powerpc
 	bool "PowerPC"
 	select BR2_ARCH_HAS_MMU_MANDATORY

@@ -378,6 +385,10 @@ if BR2_nios2
 source "arch/Config.in.nios2"
 endif
 
+if BR2_or1k
+source "arch/Config.in.or1k"
+endif
+
 if BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le
 source "arch/Config.in.powerpc"
 endif

arch/Config.in.or1k new file +5 -0

new file mode 100644
index 0000000..dba64a6
@@ -0,0 +1,5 @@
+config BR2_ARCH
+	default "or1k"
+
+config BR2_ENDIAN
+	default "BIG"

board/qemu/or1k/linux-4.9.config new file +29 -0

new file mode 100644
index 0000000..5ba03c3
@@ -0,0 +1,29 @@
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
+CONFIG_OPENRISC_BUILTIN_DTB="or1ksim"
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_ETHOC=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_USB_SUPPORT is not set

board/qemu/or1k/patches/linux/kallsyms.patch new file +0 -0

new file mode 100644
index 0000000..fe6f9c0

Maybe sort the kernel patches with a number.

board/qemu/or1k/patches/linux/kallsyms.patch line 11

Quoted 12 lines

board/qemu/or1k/patches/linux/kallsyms.patch new file +11 -0

@@ -0,0 +1,24 @@
+From: https://lkml.org/lkml/2016/12/31/13
+
+The build robot reports:
+
+   .tmp_kallsyms1.o: In function `kallsyms_relative_base':
+>> (.rodata+0x8a18): undefined reference to `_text'
+
+This is when using 'make alldefconfig'. Adding this _text symbol to mark
+the start of the kernel as in other architecture fixes this.
+
+Signed-off-by: Stafford Horne <[email protected]>

Missing your SoB line here.

board/qemu/or1k/patches/linux/ld-or1k.patch

Quoted 18 lines

board/qemu/or1k/patches/linux/kallsyms.patch new file +13 -0

+
+diff -Nur linux-4.9.orig/arch/openrisc/kernel/vmlinux.lds.S linux-4.9/arch/openrisc/kernel/vmlinux.lds.S
+--- linux-4.9.orig/arch/openrisc/kernel/vmlinux.lds.S	2016-12-11 20:17:54.000000000 +0100
++++ linux-4.9/arch/openrisc/kernel/vmlinux.lds.S	2017-01-01 12:13:43.039107518 +0100
+@@ -38,6 +38,8 @@
+         /* Read-only sections, merged into text segment: */
+         . = LOAD_BASE ;
+ 
++	_text = .;
++
+ 	/* _s_kernel_ro must be page aligned */
+ 	. = ALIGN(PAGE_SIZE);
+ 	_s_kernel_ro = .;

board/qemu/or1k/patches/linux/ld-or1k.patch new file +0 -0

new file mode 100644
index 0000000..264f916

Missing patch description and your SoB line here.

Quoted 113 lines

board/qemu/or1k/patches/linux/ld-or1k.patch new file +12 -0

@@ -0,0 +1,12 @@
+diff -Nur linux-4.4.5.orig/arch/openrisc/kernel/vmlinux.lds.S linux-4.4.5/arch/openrisc/kernel/vmlinux.lds.S
+--- linux-4.4.5.orig/arch/openrisc/kernel/vmlinux.lds.S	2016-03-10 00:35:58.000000000 +0100
++++ linux-4.4.5/arch/openrisc/kernel/vmlinux.lds.S	2016-03-16 09:21:07.933535532 +0100
+@@ -30,7 +30,7 @@
+ #include <asm/cache.h>
+ #include <asm-generic/vmlinux.lds.h>
+ 
+-OUTPUT_FORMAT("elf32-or32", "elf32-or32", "elf32-or32")
++OUTPUT_FORMAT("elf32-or1k", "elf32-or1k", "elf32-or1k")
+ jiffies = jiffies_64 + 4;
+ 
+ SECTIONS

board/qemu/or1k/readme.txt new file +9 -0

new file mode 100644
index 0000000..53c66ad
@@ -0,0 +1,9 @@
+Run the emulation with:
+
+ qemu-system-or32 -kernel output/images/vmlinux -nographic
+
+The login prompt will appear in the terminal that started Qemu.
+
+Ethernet support is not working, yet.
+
+Tested with QEMU 2.8.0.

configs/qemu_or1k_defconfig new file +22 -0

new file mode 100644
index 0000000..111afc2
@@ -0,0 +1,22 @@
+# Architecture
+BR2_or1k=y
+
+# System
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+
+# Patches
+BR2_GLOBAL_PATCH_DIR="board/qemu/or1k/patches"
+
+# Filesystem
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_ROOTFS_INITRAMFS=y
+
+# Linux headers same as kernel, a 4,9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/or1k/linux-4.9.config"

package/gcc/Config.in.host +11 -3

index d8fbc18..eb41aa4 100644
@@ -3,6 +3,7 @@ comment "GCC Options"
 choice
 	prompt "GCC compiler Version"
 	default BR2_GCC_VERSION_ARC if BR2_arc
+	default BR2_GCC_VERSION_OR1K if BR2_or1k
 	default BR2_GCC_VERSION_5_X
 	help
 	  Select the version of gcc you wish to use.

@@ -10,7 +11,7 @@ choice
 	config BR2_GCC_VERSION_4_8_X
 		bool "gcc 4.8.x"
 		# Broken or unsupported architectures
-		depends on !BR2_microblaze && !BR2_arc \
+		depends on !BR2_microblaze && !BR2_arc && !BR2_or1k \
 			&& !BR2_powerpc64le && !BR2_nios2 && !BR2_bfin
 		# Broken or unsupported ARM cores
 		depends on !BR2_cortex_a12 && !BR2_cortex_a17 && !BR2_ARM_CPU_ARMV8

@@ -36,10 +37,16 @@ choice
 		depends on BR2_arc
 		select BR2_TOOLCHAIN_GCC_AT_LEAST_6
 
+	config BR2_GCC_VERSION_OR1K
+		bool "gcc or1k (5.x)"
+		# Only supported architecture
+		depends on BR2_or1k
+		select BR2_TOOLCHAIN_GCC_AT_LEAST_5
+
 	config BR2_GCC_VERSION_4_9_X
 		bool "gcc 4.9.x"
 		# Broken or unsupported architectures
-		depends on !BR2_arc && !BR2_bfin
+		depends on !BR2_arc && !BR2_bfin && !BR2_or1k
 		# Broken or unsupported ARM cores
 		depends on !BR2_cortex_a17 && !BR2_cortex_a72
 		# Unsupported MIPS cores

@@ -60,7 +67,7 @@ choice
 	config BR2_GCC_VERSION_5_X
 		bool "gcc 5.x"
 		# Broken or unsupported architectures
-		depends on !BR2_arc && !BR2_bfin
+		depends on !BR2_arc && !BR2_bfin && !BR2_or1k
 		# musl ppc64 unsupported
 		depends on !(BR2_TOOLCHAIN_USES_MUSL && (BR2_powerpc64 || BR2_powerpc64le))
 		# Unsupported MIPS cores

@@ -75,6 +82,7 @@ choice
 		# Broken or unsupported architectures
 		depends on !BR2_arc
 		depends on !BR2_microblaze
+		depends on !BR2_or1k
 		# Unsupported MIPS cores
 		depends on !BR2_mips_m6250 && !BR2_mips_p6600
 		select BR2_TOOLCHAIN_GCC_AT_LEAST_6

package/gcc/Config.in.host config BR2_GCC_VERSION · line 110

Quoted 4 lines

package/gcc/Config.in.host +1 -0

@@ -99,6 +107,7 @@ config BR2_GCC_VERSION
 	default "5.4.0"     if BR2_GCC_VERSION_5_X
 	default "6.3.0"     if BR2_GCC_VERSION_6_X
 	default "arc-2016.09-release" if BR2_GCC_VERSION_ARC
+	default "musl-5.4.0" if BR2_GCC_VERSION_OR1K

It's weird to have musl in the gcc archive name.

What's about or1k-5.4.0 branch or the release archive [2] ?

[2] https://github.com/openrisc/or1k-gcc/releases/tag/or1k-5.3.0-release

Otherwise looks good.
I'm able to boot the system using Qemu v2.7.0.

Best regards,
Romain

Quoted 76 lines

package/gcc/Config.in.host +0 -0

 config BR2_EXTRA_GCC_CONFIG_OPTIONS
 	string "Additional gcc options"

package/gcc/gcc.hash +2 -0

index 1988237..4376db4 100644
@@ -13,3 +13,5 @@ sha512  234dd9b1bdc9a9c6e352216a7ef4ccadc6c07f156006a59759c5e0e6a69f0abcdc14630e
 
 # Locally calculated (fetched from Github)
 sha512  faae6dc3f7843412068a52de5919797cd23e6ed1b8d140c230d0381f13fd38af67baaa4a09e581c03602127da3dd2fab6f9f5d7ac5d4270585bd079c673dda9a  gcc-arc-2016.09-release.tar.gz
+# Locally calculated (fetched from Github)
+sha512  841101f7de45f327bf2e92f3efc73ca88a021e4b9b541458ce80a16e55882bd8606a8492d75c57c589ee2c10d42ae2865b67690155d7289a541df1d68096402f  gcc-musl-5.4.0.tar.gz

package/gcc/gcc.mk +4 -2

index 464e4c9..7b7a5cf 100644
@@ -13,11 +13,13 @@ GCC_VERSION = $(call qstrip,$(BR2_GCC_VERSION))
 ifeq ($(BR2_arc),y)
 GCC_SITE = $(call github,foss-for-synopsys-dwc-arc-processors,gcc,$(GCC_VERSION))
 GCC_SOURCE = gcc-$(GCC_VERSION).tar.gz
+else ifeq ($(BR2_or1k),y)
+GCC_SITE = $(call github,openrisc,or1k-gcc,$(GCC_VERSION))
+GCC_SOURCE = gcc-$(GCC_VERSION).tar.gz
 else
 GCC_SITE = $(BR2_GNU_MIRROR:/=)/gcc/gcc-$(GCC_VERSION)
-endif
-
 GCC_SOURCE ?= gcc-$(GCC_VERSION).tar.bz2
+endif
 
 #
 # Xtensa special hook

package/uclibc/Config.in +3 -2

index a200154..4d5f629 100644
@@ -57,12 +57,12 @@ choice
 		select BR2_TOOLCHAIN_HAS_THREADS
 		select BR2_TOOLCHAIN_HAS_THREADS_NPTL
 		depends on BR2_USE_MMU
-		depends on !BR2_m68k && !BR2_microblaze
+		depends on !BR2_m68k && !BR2_microblaze && !BR2_or1k
 
 	config BR2_PTHREADS
 		bool "linuxthreads"
 		select BR2_TOOLCHAIN_HAS_THREADS
-		depends on BR2_bfin || BR2_m68k || BR2_microblaze || BR2_arm || BR2_armeb || BR2_xtensa
+		depends on BR2_bfin || BR2_m68k || BR2_microblaze || BR2_or1k || BR2_arm || BR2_armeb || BR2_xtensa
 
 	config BR2_PTHREADS_NONE
 		bool "none"

@@ -106,6 +106,7 @@ config BR2_UCLIBC_TARGET_ARCH
 	default "m68k"	   if BR2_m68k
 	default "microblaze"   if BR2_microblaze
 	default "mips"	   if BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
+	default "or1k"     if BR2_or1k
 	default "powerpc"  if BR2_powerpc
 	default "sh"	   if BR2_sh
 	default "sparc"	   if BR2_sparc

toolchain/toolchain-buildroot/Config.in +2 -2

index c8436cc..d5f98a9 100644
@@ -32,8 +32,8 @@ config BR2_TOOLCHAIN_BUILDROOT_UCLIBC
 	depends on BR2_arcle   || BR2_arceb  || BR2_arm    || BR2_armeb    || \
 		   BR2_bfin    || BR2_i386   || BR2_m68k   || BR2_microblaze || \
 		   BR2_mips    || BR2_mipsel || BR2_mips64 || BR2_mips64el || \
-		   BR2_powerpc || BR2_sh2a   || BR2_sh4	   || BR2_sh4eb    || \
-		   BR2_sparc   || BR2_xtensa || BR2_x86_64
+		   BR2_or1k    || BR2_powerpc || BR2_sh2a   || BR2_sh4	   || \
+		   BR2_sh4eb   || BR2_sparc   || BR2_xtensa || BR2_x86_64
 	# Unsupported for MIPS R6
 	depends on !BR2_MIPS_CPU_MIPS32R6 && !BR2_MIPS_CPU_MIPS64R6
 	help

Waldemar Brodkorb

author

2017-01-08 08:46 UTC #2 lore raw

PATCH 1/1 arch: add support for OpenRISC architecture

Hi Romain,
Romain Naour wrote,

Quoted 9 lines

Hi Waldemar,
Le 07/01/2017 ? 09:48, Waldemar Brodkorb a ?crit :
Quoted 3 lines
Add a sample defconfig which can be used to create a system for Qemu. Openrisc community is getting more active recently and tries to add missing patches upstream to gcc/gdb.
I'm wondering if all Binutils version (2.25.1, 2.26.1 and 2.27) can be used on openRISC? Have you considered to use the openrisc fork [1] ?

Thanks for your feedback. Yes all binutils version are working fine, I just double checked now. So there is no need to use the github version for binutils. There is no Linux gdb support, yet. You can't use gdbserver or gdb native for now.
You could use gdb to debug bare metal code.

best regards
Waldemar

Thomas Petazzoni

2017-01-24 10:38 UTC #3 lore raw

PATCH 1/1 arch: add support for OpenRISC architecture

Hello,

Quoted 8 lines · Waldemar Brodkorb

Quoted 2 lines
I'm wondering if all Binutils version (2.25.1, 2.26.1 and 2.27) can be used on openRISC? Have you considered to use the openrisc fork [1] ?
Thanks for your feedback. Yes all binutils version are working fine, I just double checked now. So there is no need to use the github version for binutils. There is no Linux gdb support, yet. You can't use gdbserver or gdb native for now.
You could use gdb to debug bare metal code.

Romain made numerous other comments in his review. Could you reply to the other comments he made?

Also, could you resend an updated version that takes into account the comments from Romain (possibly by adjusting the commit log to explain which gcc versions, binutils versions, gdb features, etc. are supported), and also by splitting the thing into two patches:

- one adding the architecture/toolchain support
- one adding the qemu based defconfig

Thanks a lot!

Thomas

Signature · 3 lines

Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com