Optimize cgroup ctx switch and remove cpuctx->unique_pmu
cover Optimize cgroup ctx switch and remove cpuctx->unique_pmu
First patch is a resend of ("perf/core: Make cgroup switch visit only cpuctxs with cgroup events") with updated change log.
Second patch cleans up the now unused cpuctx->unique_pmu.
David Carrillo-Cisneros (2):
perf/core: Make cgroup switch visit only cpuctxs with cgroup events perf/core: Remove perf_cpu_context::unique_pmu
include/linux/perf_event.h | 2 +- kernel/events/core.c | 129 ++++++++++++++++----------------------------- 2 files changed, 47 insertions(+), 84 deletions(-)
Signature · 1 line
2.11.0.483.g087da7b7c-goog
PATCH 1/2 perf/core: Make cgroup switch visit only cpuctxs with cgroup events
v3: This is a resend of ("perf/core: only check cpuctx with cgroup
events during cgroup switch") with updated changelog.
v2: Fix build when no CONFIG_CGROUP_PERF
This patch follows from a conversation in CQM/CMT's last series about speeding up the context switch for cgroup events:
https://patchwork.kernel.org/patch/9478617/
This is a low-hanging fruit optimization. It replaces the iteration over the "pmus" list in cgroup switch by an iteration over a new list that contains only cpuctxs with at least one cgroup event.
This is necessary because the number of pmus have increased over the years e.g modern x86 server systems have well above 50 pmus.
The iteration over the full pmu list is unneccessary and can be costly in heavy cache contention scenarios.
Below are some instrumentation measurements with 10, 50 and 90 percentiles of the total cost of context switch before and after this optimization for a simple array read/write microbenchark.
Contention
Level Nr events Before (us) After (us) Median
L2 L3 types (10%, 50%, 90%) (10%, 50%, 90% Speedup
--------------------------------------------------------------------------
Low Low 1 (1.72, 2.42, 5.85) (1.35, 1.64, 5.46) 29% High Low 1 (2.08, 4.56, 19.8) (1720, 2.20, 13.7) 51% High High 1 (2.86, 10.4, 12.7) (2.54, 4.32, 12.1) 58%
Low Low 2 (1.98, 3.20, 6.89) (1.68, 2.41, 8.89) 24% High Low 2 (2.48, 5.28, 22.4) (2150, 3.69, 14.6) 30% High High 2 (3.32, 8.09, 13.9) (2.80, 5.15, 13.7) 36%
where:
1 event type = cycles
2 event types = cycles,intel_cqm/llc_occupancy/
Contention L2 Low: workset < L2 cache size.
High: " >> L2 " " .
Contention L3 Low: workset of task on all sockets < L3 cache size.
High: " " " " " " >> L3 " " .
Median Speedup is (50%ile Before - 50%ile After) / 50%ile Before
Unsurprisingly, the benefits of this optimization decrease with the number of cpuctxs with a cgroup events, yet, is never detrimental.
--- include/linux/perf_event.h | 1 + kernel/events/core.c | 98 +++++++++++++++++++++------------------------- 2 files changed, 46 insertions(+), 53 deletions(-)
include/linux/perf_event.h +1 -0
@@ -788,6 +788,7 @@ struct perf_cpu_context {struct pmu *unique_pmu;#ifdef CONFIG_CGROUP_PERF struct perf_cgroup *cgrp; +struct list_head cgrp_cpuctx_entry;#endif struct list_head sched_cb_entry;
kernel/events/core.c +45 -53
139 lines not on this page · raw message
Signature · 1 line
2.11.0.483.g087da7b7c-goog
Re: [PATCH 1/2] perf/core: Make cgroup switch visit only cpuctxs with cgroup events
Quoted 8 lines · David Carrillo-Cisneros
This is a low-hanging fruit optimization. It replaces the iteration over the "pmus" list in cgroup switch by an iteration over a new list that contains only cpuctxs with at least one cgroup event.
This is necessary because the number of pmus have increased over the years e.g modern x86 server systems have well above 50 pmus.
The iteration over the full pmu list is unneccessary and can be costly in heavy cache contention scenarios.
While I haven't done any measurement of the overhead, this looks like a nice rework/cleanup.
Since this is only changing the management of cpu contexts, this shouldn't adversely affect systems with heterogeneous CPUs. I've also given this a spin on such a system, to no ill effect.
I have one (very minor) comment below, but either way:
kernel/events/core.c list_update_cgroup_event(struct perf_event *event, · line 879
Quoted 5 lines
kernel/events/core.c +1
-0@@ -889,6 +876,7 @@ list_update_cgroup_event(struct perf_event *event, struct perf_event_context *ctx, bool add) {struct perf_cpu_context *cpuctx; +struct list_head *lentry;
It might be worth calling this cpuctx_entry, so that it's clear which list element it refers to. I can imagine we'll add more list manipulation in this path in future.
Thanks,
Mark.
Re: [PATCH 1/2] perf/core: Make cgroup switch visit only cpuctxs with cgroup events
Quoted 13 lines · Mark Rutland
Quoted 8 lines · David Carrillo-Cisneros
This is a low-hanging fruit optimization. It replaces the iteration over the "pmus" list in cgroup switch by an iteration over a new list that contains only cpuctxs with at least one cgroup event.
This is necessary because the number of pmus have increased over the years e.g modern x86 server systems have well above 50 pmus.
The iteration over the full pmu list is unneccessary and can be costly in heavy cache contention scenarios.While I haven't done any measurement of the overhead, this looks like a nice rework/cleanup.
Quoted 8 lines
Since this is only changing the management of cpu contexts, this shouldn't adversely affect systems with heterogeneous CPUs. I've also given this a spin on such a system, to no ill effect.
I have one (very minor) comment below, but either way:
Acked-by Mark Rutland <[email protected]>Tested-by Mark Rutland <[email protected]>
Thanks for reviewing it. I made the lil' change you proposed and added your Ack.
Quoted 13 lines
kernel/events/core.c list_update_cgroup_event(struct perf_event *event, · line 879
Quoted 6 lines
kernel/events/core.c +1
-0@@ -889,6 +876,7 @@ list_update_cgroup_event(struct perf_event *event, struct perf_event_context *ctx, bool add) {struct perf_cpu_context *cpuctx; +struct list_head *lentry;It might be worth calling this
cpuctx_entry, so that it's clear which list element it refers to. I can imagine we'll add more list manipulation in this path in future.Thanks,
Mark.
PATCH 2/2 perf/core: Remove perf_cpu_context::unique_pmu
In reply to David Carrillo-Cisneroscpuctx->unique_pmu was originally introduced as a way to identify cpuctxs with shared pmus in order to avoid visiting the same cpuctx more than once in a for_each_pmu loop.
cpuctx->unique_pmu == cpuctx->pmu in non-software task contexts since they have only one pmu per cpuctx. Since perf_pmu_sched_task is only called in hw contexts, this patch replaces cpuctx->unique_pmu by cpuctx->pmu in it.
The change above, together with the previous patch in this series, removed the remaining uses of cpuctx->unique_pmu, so we remove it altogether.
--- include/linux/perf_event.h | 1 - kernel/events/core.c | 31 +------------------------------ 2 files changed, 1 insertion(+), 31 deletions(-)
include/linux/perf_event.h +0 -1
@@ -785,7 +785,6 @@ struct perf_cpu_context {ktime_t hrtimer_interval;unsigned int hrtimer_active; -struct pmu *unique_pmu;#ifdef CONFIG_CGROUP_PERF struct perf_cgroup *cgrp;struct list_head cgrp_cpuctx_entry;
kernel/events/core.c +1 -30
@@ -2883,7 +2883,7 @@ static void perf_pmu_sched_task(struct task_struct *prev,return ;list_for_each_entry (cpuctx,this_cpu_ptr (&sched_cb_list), sched_cb_entry) { - pmu = cpuctx->unique_pmu;/* software PMUs will not have sched_task */ + pmu = cpuctx->ctx.pmu;/* software PMUs will not have sched_task */ if (WARN_ON_ONCE (!pmu->sched_task))continue ;
@@ -8572,37 +8572,10 @@ static struct perf_cpu_context __percpu *find_pmu_context(int ctxn)return NULL ; } -static void update_pmu_context (struct pmu *pmu,struct pmu *old_pmu) -{ -int cpu; - -for_each_possible_cpu (cpu) { -struct perf_cpu_context *cpuctx; - - cpuctx =per_cpu_ptr (pmu->pmu_cpu_context, cpu); - -if (cpuctx->unique_pmu == old_pmu) - cpuctx->unique_pmu = pmu; - } -} -static void free_pmu_context (struct pmu *pmu) { -struct pmu *i; -mutex_lock (&pmus_lock); -/* -* Like a real lame refcount. -*/ -list_for_each_entry (i, &pmus, entry) { -if (i->pmu_cpu_context == pmu->pmu_cpu_context) { -update_pmu_context (i, pmu); - goto out; - } - } -free_percpu (pmu->pmu_cpu_context); -out:mutex_unlock (&pmus_lock); }
@@ -8806,8 +8779,6 @@ int perf_pmu_register(struct pmu *pmu, const char *name, int type) cpuctx->ctx.pmu = pmu;__perf_mux_hrtimer_init (cpuctx, cpu); - - cpuctx->unique_pmu = pmu; } got_cpu_context:
Signature · 1 line
2.11.0.483.g087da7b7c-goog
Re: [PATCH 2/2] perf/core: Remove perf_cpu_context::unique_pmu
Quoted 4 lines · David Carrillo-Cisneros
cpuctx->unique_pmuwas originally introduced as a way to identify cpuctxs with shared pmus in order to avoid visiting the same cpuctx more than once in afor_each_pmuloop.
Quoted 8 lines
cpuctx->unique_pmu==cpuctx->pmuin non-software task contexts since they have only one pmu per cpuctx. Sinceperf_pmu_sched_taskis only called in hw contexts, this patch replacescpuctx->unique_pmubycpuctx->pmuin it.The change above, together with the previous patch in this series, removed the remaining uses of
cpuctx->unique_pmu, so we remove it altogether.Signed-off-by David Carrillo-Cisneros <[email protected]>
I don't have any HW with a PMU that needs a sched_task callback, so I'm unable to give this a full test, but it looks sane to me. FWIW:
Thanks,
Mark.