Switch all subdirs over to modular trace.h file
v3 cover Switch all subdirs over to modular trace.h file
This is the final part of my trace events refactoring.
Previously we merged code that split trace-events up into one file per sub-directory. We also merged code to the code-generator that enables us to generate and use multiple independant sets of trace events.
This is the final glue that makes use of these two earlier changes, so that we actually generate a separate trace.h & trace.c file per sub-directory.
The result is that when adding a new trace event to a file, only files in that sub-directory get rebuilt. Theoretically the build is faster too, since each source file includes a much smaller trace.h that only contains probes relevant to it. In reality this speed benefit is probably marginal & lost in the noise.
This patch series has massively changed since v2.
- It no longer modifies the Makefile.objs rules in each sub-directory. A bit of magic in the top level Makefile.objs file lets us generate all the needed rules from one place
- It sticks with bare "trace.h" includes instead of adding sub-dir prefix "hw/block/trace.h". To achieve this we had to rename the trace.h to trace-root.h in the top level directory to avoid ambiguity in places where a file needs to include the top-level instead of local trace.h
Daniel P. Berrange (8):
make: move top level dir to end of include search path
trace: move hw/block/dataplane events to correct subdir
trace: move hw/xen events to correct subdir
trace: move hw/i386/xen events to correct subdir
trace: move setting of group name into Makefiles
trace: switch to modular code generation for sub-directories
trace: update docs to reflect new code generation approach
trace: improve error reporting when parsing simpletrace header
.gitignore | 22 +++-- Makefile | 156 ++++++++++++++++++++++++++---- Makefile.objs | 99 ++++++++++--------- Makefile.target | 10 +- aio-posix.c | 2 +- balloon.c | 2 +- block.c | 2 +- blockdev-nbd.c | 1 - blockdev.c | 2 +- blockjob.c | 1 - cpu-exec.c | 2 +- dma-helpers.c | 2 +- docs/tracing.txt | 55 ++++++++--- exec.c | 2 +- hw/block/dataplane/trace-events | 6 ++ hw/block/trace-events | 5 - hw/i386/trace-events | 7 -- hw/i386/xen/trace-events | 6 ++ hw/net/fsl_etsec/etsec.c | 1 - hw/xen/trace-events | 13 +++ include/exec/cpu_ldst_template.h | 2 +- include/exec/cpu_ldst_useronly_template.h | 2 +- include/hw/xen/xen_common.h | 2 +- include/trace.h | 6 -- ioport.c | 2 +- kvm-all.c | 2 +- memory.c | 2 +- monitor.c | 2 +- qom/cpu.c | 2 +- rules.mak | 17 ++-- scripts/simpletrace.py | 10 +- scripts/tracetool.py | 31 +++--- scripts/tracetool/backend/dtrace.py | 7 +- scripts/tracetool/backend/simple.py | 1 - scripts/tracetool/backend/ust.py | 7 +- scripts/tracetool/format/c.py | 7 +- scripts/tracetool/format/tcg_h.py | 6 +- scripts/tracetool/format/tcg_helper_c.py | 6 +- scripts/tracetool/format/ust_events_c.py | 2 +- scripts/tracetool/format/ust_events_h.py | 7 +- spice-qemu-char.c | 2 +- tests/Makefile.include | 2 +- thread-pool.c | 2 +- trace-events | 10 -- trace/Makefile.objs | 93 ++---------------- trace/control-target.c | 2 +- trace/control.c | 2 +- trace/ftrace.c | 2 +- trace/simple.c | 1 - translate-all.c | 2 +- vl.c | 2 +- xen-hvm.c | 2 +- xen-mapcache.c | 2 +- 53 files changed, 385 insertions(+), 258 deletions(-) create mode 100644 hw/block/dataplane/trace-events create mode 100644 hw/i386/xen/trace-events create mode 100644 hw/xen/trace-events delete mode 100644 include/trace.h
Signature · 1 line
2.9.3
PATCH v3 1/8 make: move top level dir to end of include search path
Currently the search path is
1. source dir corresponding to input file (implicit by compiler)
2. top level build dir
3. top level source dir
4. top level source include/ dir
5. source dir corresponding to input file
6. build dir corresponding to output file
This causes a semantic difference in behaviour for builds where srcdir == builddir vs srcdir != builddir, because item 5 moves from end to start, when srcdir == builddir.
As a general rule we also want to move to have all shared headers in the include/ dir, so move that ahead of the top level dirs in the search order.
Thus we now have:
1. source dir corresponding to input file
2. build dir corresponding to output file
3. top level build dir
4. top level source dir
5. top level source include/ dir
and items 1+2 and 4+5 collapse into a single dir when srcdir==builddir so overall order remains the same.
--- rules.mak | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)
rules.mak +10 -7
@@ -26,8 +26,10 @@ QEMU_CXXFLAGS = -D__STDC_LIMIT_MACROS $(filter-out -Wstrict-prototypes -Wmissing # Flags for dependency generation QEMU_DGFLAGS += -MMD -MP -MT $@ -MF $(@D)/$(*F).d -# Same as -I$(SRC_PATH) -I., but for the nested source/object directories -QEMU_INCLUDES += -I$(<D) -I$(@D) +# Compiler searches the source file dir first, but in vpath builds +# we need to make it search the build dir too, before any other +# explicit search paths. +QEMU_LOCAL_INCLUDES = -I$(BUILD_DIR)/$(@D) WL_U := -Wl,-u, find-symbols = $(if $1, $(sort $(shell $(NM) -P -g $1 | $2)))
@@ -61,7 +63,7 @@ expand-objs = $(strip $(sort $(filter %.o,$1)) \ $(filter-out %.o %.mo,$1)) %.o: %.c - $(call quiet-command,$(CC) $(QEMU_INCLUDES) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) -c -o $@ $<,"CC","$(TARGET_DIR)$@") + $(call quiet-command,$(CC) $(QEMU_LOCAL_INCLUDES) $(QEMU_INCLUDES) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) -c -o $@ $<,"CC","$(TARGET_DIR)$@") %.o: %.rc $(call quiet-command,$(WINDRES) -I. -o $@ $<,"RC","$(TARGET_DIR)$@")
@@ -74,16 +76,16 @@ LINK = $(call quiet-command, $(LINKPROG) $(QEMU_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $(version-obj-y) $(call extract-libs,$1) $(LIBS),"LINK","$(TARGET_DIR)$@") %.o: %.S - $(call quiet-command,$(CCAS) $(QEMU_INCLUDES) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) -c -o $@ $<,"CCAS","$(TARGET_DIR)$@") + $(call quiet-command,$(CCAS) $(QEMU_LOCAL_INCLUDES) $(QEMU_INCLUDES) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) -c -o $@ $<,"CCAS","$(TARGET_DIR)$@") %.o: %.cc - $(call quiet-command,$(CXX) $(QEMU_INCLUDES) $(QEMU_CXXFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) -c -o $@ $<,"CXX","$(TARGET_DIR)$@") + $(call quiet-command,$(CXX) $(QEMU_LOCAL_INCLUDES) $(QEMU_INCLUDES) $(QEMU_CXXFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) -c -o $@ $<,"CXX","$(TARGET_DIR)$@") %.o: %.cpp - $(call quiet-command,$(CXX) $(QEMU_INCLUDES) $(QEMU_CXXFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) -c -o $@ $<,"CXX","$(TARGET_DIR)$@") + $(call quiet-command,$(CXX) $(QEMU_LOCAL_INCLUDES) $(QEMU_INCLUDES) $(QEMU_CXXFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) -c -o $@ $<,"CXX","$(TARGET_DIR)$@") %.o: %.m - $(call quiet-command,$(OBJCC) $(QEMU_INCLUDES) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) -c -o $@ $<,"OBJC","$(TARGET_DIR)$@") + $(call quiet-command,$(OBJCC) $(QEMU_LOCAL_INCLUDES) $(QEMU_INCLUDES) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) -c -o $@ $<,"OBJC","$(TARGET_DIR)$@") %.o: %.dtrace $(call quiet-command,dtrace -o $@ -G -s $<,"GEN","$(TARGET_DIR)$@")
@@ -359,6 +361,7 @@ define unnest-vars $(eval $(o:%.mo=%$(DSOSUF)): module-common.o $($o-objs)), $(error $o added in $v but $o-objs is not set))) $(shell mkdir -p ./ $(sort $(dir $($v)))) + $(shell cd $(BUILD_DIR) && mkdir -p ./ $(sort $(dir $($v)))) # Include all the .d files $(eval -include $(patsubst %.o,%.d,$(patsubst %.mo,%.d,$($v)))) $(eval $v := $(filter-out %/,$($v))))
Signature · 1 line
2.9.3
Re: [Qemu-devel] [PATCH v3 1/8] make: move top level dir to end of include search path
Quoted 9 lines · Daniel P. Berrange
Currently the search path is
1. source dir corresponding to input file (implicit by compiler)
2. top level build dir
3. top level source dir
4. top level sourceinclude/dir
5. source dir corresponding to input file
6. build dir corresponding to output file
Quoted 3 lines
This causes a semantic difference in behaviour for builds where srcdir == builddir vs srcdir != builddir, because item 5 moves from end to start, when srcdir == builddir.
Rather, item 5 is a no-op (because it duplicated 1), and item 6 moves from the end to the beginning when srcdir == builddir
Quoted 4 lines
As a general rule we also want to move to have all shared headers in the
include/dir, so move that ahead of the top level dirs in the search order.
Wait - are you proposing that you swap 4 to occur earlier than 2/3?...
Quoted 8 lines
Thus we now have:
1. source dir corresponding to input file
2. build dir corresponding to output file
3. top level build dir
4. top level source dir
5. top level sourceinclude/dir
...because this doesn't match that swap, and I don't see it in the patch body (but I may have missed it; I'm not as strong at reviewing make as I am at C)
Quoted 2 lines
and items 1+2 and 4+5 collapse into a single dir when srcdir==builddir
Isn't that items 3+4 (not 4+5) that collapse?
Quoted 14 lines
so overall order remains the same.
Signed-off-by Daniel P. Berrange <[email protected]>--- rules.mak | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)rules.mak +0
-0
rules.mak QEMU_CXXFLAGS = -D__STDC_LIMIT_MACROS $(filter-out -Wstrict-prototypes -Wmissing · line 30
Quoted 5 lines
rules.mak +0
-2@@ -26,8 +26,10 @@ QEMU_CXXFLAGS = -D__STDC_LIMIT_MACROS $(filter-out -Wstrict-prototypes -Wmissing # Flags for dependency generation QEMU_DGFLAGS += -MMD -MP -MT $@ -MF $(@D)/$(*F).d -# Same as -I$(SRC_PATH) -I., but for the nested source/object directories -QEMU_INCLUDES += -I$(<D) -I$(@D)
In particular, this is the old code for 5 and 6,
rules.mak QEMU_CXXFLAGS = -D__STDC_LIMIT_MACROS $(filter-out -Wstrict-prototypes -Wmissing · line 32
Quoted 4 lines
rules.mak +4
-0+# Compiler searches the source file dir first, but in vpath builds +# we need to make it search the build dir too, before any other +# explicit search paths. +QEMU_LOCAL_INCLUDES = -I$(BUILD_DIR)/$(@D)
while this is the new code for 2, plus documentation that 1 is implicit.
rules.mak expand-objs = $(strip $(sort $(filter %.o,$1)) \ · line 66
Quoted 9 lines
rules.mak +1
-1WL_U := -Wl,-u, find-symbols = $(if $1, $(sort $(shell $(NM) -P -g $1 | $2)))@@ -61,7 +63,7 @@ expand-objs = $(strip $(sort $(filter %.o,$1)) \ $(filter-out %.o %.mo,$1)) %.o: %.c - $(call quiet-command,$(CC) $(QEMU_INCLUDES) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) -c -o $@ $<,"CC","$(TARGET_DIR)$@") + $(call quiet-command,$(CC) $(QEMU_LOCAL_INCLUDES) $(QEMU_INCLUDES) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) -c -o $@ $<,"CC","$(TARGET_DIR)$@")
And the pre-pending of QEMU_LOCAL_INCLUDES is what changes the position of the local directory from last to first, thus delaying the top level dir to the end, but I don't see top/include/ moving.
These are now some long lines; is it worth taking the time to add \ line splitting for legibility, either in this patch or as an add-on?
rules.mak define unnest-vars · line 365
Quoted 6 lines
rules.mak +1
-0@@ -359,6 +361,7 @@ define unnest-vars $(eval $(o:%.mo=%$(DSOSUF)): module-common.o $($o-objs)), $(error $o added in $v but $o-objs is not set))) $(shell mkdir -p ./ $(sort $(dir $($v)))) + $(shell cd $(BUILD_DIR) && mkdir -p ./ $(sort $(dir $($v)))) # Include all the .d files
Okay, this change makes sense (make sure all the build directories exist in time; no-op for in-tree build, but helpful for VPATH), but seems unrelated to the commit message. Rebase snafu?
It looks like you're on the right track, but there's enough discrepancies between the commit message and actual change that I'd prefer a v4 before I grant R-b.
Signature · 2 lines
Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
Re: [Qemu-devel] [PATCH v3 1/8] make: move top level dir to end of include search path
Quoted 10 lines · Eric Blake
Quoted 9 lines · Daniel P. Berrange
Currently the search path is
1. source dir corresponding to input file (implicit by compiler)
2. top level build dir
3. top level source dir
4. top level sourceinclude/dir
5. source dir corresponding to input file
6. build dir corresponding to output file
Quoted 6 lines
Quoted 3 lines
This causes a semantic difference in behaviour for builds where srcdir == builddir vs srcdir != builddir, because item 5 moves from end to start, when srcdir == builddir.
Rather, item 5 is a no-op (because it duplicated 1), and item 6 moves from the end to the beginning when srcdir == builddir
Yes
Quoted 5 lines
Quoted 3 lines
As a general rule we also want to move to have all shared headers in the
include/dir, so move that ahead of the top level dirs in the search order.Wait - are you proposing that you swap 4 to occur earlier than 2/3?...
Sigh, left over from an earlier version of this patch. I was trying todo a more general cleanup as described here, but decided to cut back to the bare minimum I needed for trace work.
Quoted 11 lines
Quoted 7 lines
Thus we now have:
1. source dir corresponding to input file
2. build dir corresponding to output file
3. top level build dir
4. top level source dir
5. top level sourceinclude/dir...because this doesn't match that swap, and I don't see it in the patch body (but I may have missed it; I'm not as strong at reviewing make as I am at C)
Yeah, you're right.
Quoted 4 lines
Quoted 2 lines
and items 1+2 and 4+5 collapse into a single dir when srcdir==builddir
Isn't that items 3+4 (not 4+5) that collapse?
Yes, typo.
Quoted 22 lines
Quoted 14 lines
so overall order remains the same.
Signed-off-by Daniel P. Berrange <[email protected]>--- rules.mak | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)rules.mak +0
-0rules.mak QEMU_CXXFLAGS = -D__STDC_LIMIT_MACROS $(filter-out -Wstrict-prototypes -Wmissing · line 30
Quoted 5 lines
rules.mak +0
-2@@ -26,8 +26,10 @@ QEMU_CXXFLAGS = -D__STDC_LIMIT_MACROS $(filter-out -Wstrict-prototypes -Wmissing # Flags for dependency generation QEMU_DGFLAGS += -MMD -MP -MT $@ -MF $(@D)/$(*F).d -# Same as -I$(SRC_PATH) -I., but for the nested source/object directories -QEMU_INCLUDES += -I$(<D) -I$(@D)In particular, this is the old code for 5 and 6,
Quoted 6 lines
rules.mak QEMU_CXXFLAGS = -D__STDC_LIMIT_MACROS $(filter-out -Wstrict-prototypes -Wmissing · line 32
Quoted 4 lines
rules.mak +4
-0+# Compiler searches the source file dir first, but in vpath builds +# we need to make it search the build dir too, before any other +# explicit search paths. +QEMU_LOCAL_INCLUDES = -I$(BUILD_DIR)/$(@D)while this is the new code for 2, plus documentation that 1 is implicit.
So there's a subtle difference I didn't explain, and which I'm going to tweak again.
-I$(@D)
is a relative include. eg for a file 'migration/ram.o' it will resolve to '-Imigration' relative to the build dir. Except there's a subtle difference between target-dependent and target-independent files. For example, migration/migration.o will be built in $BUILD_DIR/migration but migration/ram.o will be built in $BUILD_DIR/x86_64-softmmu/migration so this reslative include points to two different places potentially.
Hence, I changed to -I$(BUILD_DIR)/$(@D), so it is gauranteed to point to $BUILD_DIR/migration, even for target-dependant files.
In retrospect, I think it is more correct to include both directories ie -I$(BUILD_DIR)/$(@D) and -I$(@D). Even if not technically needed by this patch series I think its clearer.
Quoted 16 lines
rules.mak expand-objs = $(strip $(sort $(filter %.o,$1)) \ · line 66
Quoted 8 lines
rules.mak +1
-1WL_U := -Wl,-u, find-symbols = $(if $1, $(sort $(shell $(NM) -P -g $1 | $2)))@@ -61,7 +63,7 @@ expand-objs = $(strip $(sort $(filter %.o,$1)) \ $(filter-out %.o %.mo,$1)) %.o: %.c - $(call quiet-command,$(CC) $(QEMU_INCLUDES) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) -c -o $@ $<,"CC","$(TARGET_DIR)$@") + $(call quiet-command,$(CC) $(QEMU_LOCAL_INCLUDES) $(QEMU_INCLUDES) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) $($@-cflags) -c -o $@ $<,"CC","$(TARGET_DIR)$@")And the pre-pending of
QEMU_LOCAL_INCLUDESis what changes the position of the local directory from last to first, thus delaying the top level dir to the end, but I don't see top/include/ moving.These are now some long lines; is it worth taking the time to add \ line splitting for legibility, either in this patch or as an add-on?
Quoted 10 lines
rules.mak define unnest-vars · line 365
Quoted 6 lines
rules.mak +1
-0@@ -359,6 +361,7 @@ define unnest-vars $(eval $(o:%.mo=%$(DSOSUF)): module-common.o $($o-objs)), $(error $o added in $v but $o-objs is not set))) $(shell mkdir -p ./ $(sort $(dir $($v)))) + $(shell cd $(BUILD_DIR) && mkdir -p ./ $(sort $(dir $($v)))) # Include all the .d filesOkay, this change makes sense (make sure all the build directories exist in time; no-op for in-tree build, but helpful for VPATH), but seems unrelated to the commit message. Rebase snafu?
The existing mkdir line there ensures that the -I$(@D) always points to a directory that exists.
The new mkdir line does the same for -I$(BUILD_DIR)/$(@D).
This is to deal with fact that the compiler warns if you give a -I directory that does not exist
Regards,
Daniel
Signature · 3 lines
|: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://entangle-photo.org -o- http://search.cpan.org/~danberr/ :|
PATCH v3 2/8 trace: move hw/block/dataplane events to correct subdir
In reply to Daniel P. BerrangeThe trace-events for a given source file should generally always live in the same directory as the source file.
--- Makefile.objs | 1 + hw/block/dataplane/trace-events | 6 ++++++ hw/block/trace-events | 5 ----- 3 files changed, 7 insertions(+), 5 deletions(-) create mode 100644 hw/block/dataplane/trace-events
Makefile.objs +1 -0
@@ -125,6 +125,7 @@ trace-events-y += io/trace-events trace-events-y += migration/trace-events trace-events-y += block/trace-events trace-events-y += hw/block/trace-events +trace-events-y += hw/block/dataplane/trace-events trace-events-y += hw/char/trace-events trace-events-y += hw/intc/trace-events trace-events-y += hw/net/trace-events
hw/block/dataplane/trace-events new file +6 -0
@@ -0,0 +1,6 @@ +# See docs/tracing.txt for syntax documentation. + +# hw/block/dataplane/virtio-blk.c +virtio_blk_data_plane_start(void *s) "dataplane %p" +virtio_blk_data_plane_stop(void *s) "dataplane %p" +virtio_blk_data_plane_process_request(void *s, unsigned int out_num, unsigned int in_num, unsigned int head) "dataplane %p out_num %u in_num %u head %u"
hw/block/trace-events +0 -5
@@ -7,11 +7,6 @@ virtio_blk_handle_write(void *req, uint64_t sector, size_t nsectors) "req %p sec virtio_blk_handle_read(void *req, uint64_t sector, size_t nsectors) "req %p sector %"PRIu64" nsectors %zu" virtio_blk_submit_multireq(void *mrb, int start, int num_reqs, uint64_t offset, size_t size, bool is_write) "mrb %p start %d num_reqs %d offset %"PRIu64" size %zu is_write %d" -# hw/block/dataplane/virtio-blk.c -virtio_blk_data_plane_start(void *s) "dataplane %p" -virtio_blk_data_plane_stop(void *s) "dataplane %p" -virtio_blk_data_plane_process_request(void *s, unsigned int out_num, unsigned int in_num, unsigned int head) "dataplane %p out_num %u in_num %u head %u" - # hw/block/hd-geometry.c hd_geometry_lchs_guess(void *blk, int cyls, int heads, int secs) "blk %p LCHS %d %d %d" hd_geometry_guess(void *blk, uint32_t cyls, uint32_t heads, uint32_t secs, int trans) "blk %p CHS %u %u %u trans %d"
Signature · 1 line
2.9.3
Re: [Qemu-devel] [PATCH v3 2/8] trace: move hw/block/dataplane events to correct subdir
Quoted 10 lines · Daniel P. Berrange
The trace-events for a given source file should generally always live in the same directory as the source file.
Signed-off-by Daniel P. Berrange <[email protected]>--- Makefile.objs | 1 + hw/block/dataplane/trace-events | 6 ++++++ hw/block/trace-events | 5 ----- 3 files changed, 7 insertions(+), 5 deletions(-) create mode 100644 hw/block/dataplane/trace-events
PATCH v3 3/8 trace: move hw/xen events to correct subdir
In reply to Daniel P. BerrangeThe trace-events for a given source file should generally always live in the same directory as the source file.
--- Makefile.objs | 1 + hw/xen/trace-events | 13 +++++++++++++ trace-events | 10 ---------- 3 files changed, 14 insertions(+), 10 deletions(-) create mode 100644 hw/xen/trace-events
Makefile.objs +1 -0
@@ -152,6 +152,7 @@ trace-events-y += hw/vfio/trace-events trace-events-y += hw/acpi/trace-events trace-events-y += hw/arm/trace-events trace-events-y += hw/alpha/trace-events +trace-events-y += hw/xen/trace-events trace-events-y += ui/trace-events trace-events-y += audio/trace-events trace-events-y += net/trace-events
hw/xen/trace-events new file +13 -0
@@ -0,0 +1,13 @@ +# See docs/tracing.txt for syntax documentation. + +# include/hw/xen/xen_common.h +xen_default_ioreq_server(void) "" +xen_ioreq_server_create(uint32_t id) "id: %u" +xen_ioreq_server_destroy(uint32_t id) "id: %u" +xen_ioreq_server_state(uint32_t id, bool enable) "id: %u: enable: %i" +xen_map_mmio_range(uint32_t id, uint64_t start_addr, uint64_t end_addr) "id: %u start: %#"PRIx64" end: %#"PRIx64 +xen_unmap_mmio_range(uint32_t id, uint64_t start_addr, uint64_t end_addr) "id: %u start: %#"PRIx64" end: %#"PRIx64 +xen_map_portio_range(uint32_t id, uint64_t start_addr, uint64_t end_addr) "id: %u start: %#"PRIx64" end: %#"PRIx64 +xen_unmap_portio_range(uint32_t id, uint64_t start_addr, uint64_t end_addr) "id: %u start: %#"PRIx64" end: %#"PRIx64 +xen_map_pcidev(uint32_t id, uint8_t bus, uint8_t dev, uint8_t func) "id: %u bdf: %02x.%02x.%02x" +xen_unmap_pcidev(uint32_t id, uint8_t bus, uint8_t dev, uint8_t func) "id: %u bdf: %02x.%02x.%02x"
trace-events +0 -10
@@ -62,16 +62,6 @@ spice_vmc_event(int event) "spice vmc event %d" # xen-hvm.c xen_ram_alloc(unsigned long ram_addr, unsigned long size) "requested: %#lx, size %#lx" xen_client_set_memory(uint64_t start_addr, unsigned long size, bool log_dirty) "%#"PRIx64" size %#lx, log_dirty %i" -xen_default_ioreq_server(void) "" -xen_ioreq_server_create(uint32_t id) "id: %u" -xen_ioreq_server_destroy(uint32_t id) "id: %u" -xen_ioreq_server_state(uint32_t id, bool enable) "id: %u: enable: %i" -xen_map_mmio_range(uint32_t id, uint64_t start_addr, uint64_t end_addr) "id: %u start: %#"PRIx64" end: %#"PRIx64 -xen_unmap_mmio_range(uint32_t id, uint64_t start_addr, uint64_t end_addr) "id: %u start: %#"PRIx64" end: %#"PRIx64 -xen_map_portio_range(uint32_t id, uint64_t start_addr, uint64_t end_addr) "id: %u start: %#"PRIx64" end: %#"PRIx64 -xen_unmap_portio_range(uint32_t id, uint64_t start_addr, uint64_t end_addr) "id: %u start: %#"PRIx64" end: %#"PRIx64 -xen_map_pcidev(uint32_t id, uint8_t bus, uint8_t dev, uint8_t func) "id: %u bdf: %02x.%02x.%02x" -xen_unmap_pcidev(uint32_t id, uint8_t bus, uint8_t dev, uint8_t func) "id: %u bdf: %02x.%02x.%02x" handle_ioreq(void *req, uint32_t type, uint32_t dir, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p type=%d dir=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d" handle_ioreq_read(void *req, uint32_t type, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p read type=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d" handle_ioreq_write(void *req, uint32_t type, uint32_t df, uint32_t data_is_ptr, uint64_t addr, uint64_t data, uint32_t count, uint32_t size) "I/O=%p write type=%d df=%d ptr=%d port=%#"PRIx64" data=%#"PRIx64" count=%d size=%d"
Signature · 1 line
2.9.3
Re: [Qemu-devel] [PATCH v3 3/8] trace: move hw/xen events to correct subdir
Quoted 10 lines · Daniel P. Berrange
The trace-events for a given source file should generally always live in the same directory as the source file.
Signed-off-by Daniel P. Berrange <[email protected]>--- Makefile.objs | 1 + hw/xen/trace-events | 13 +++++++++++++ trace-events | 10 ---------- 3 files changed, 14 insertions(+), 10 deletions(-) create mode 100644 hw/xen/trace-events
PATCH v3 4/8 trace: move hw/i386/xen events to correct subdir
In reply to Daniel P. BerrangeThe trace-events for a given source file should generally always live in the same directory as the source file.
--- Makefile.objs | 1 + hw/i386/trace-events | 7 ------- hw/i386/xen/trace-events | 6 ++++++ 3 files changed, 7 insertions(+), 7 deletions(-) create mode 100644 hw/i386/xen/trace-events
Makefile.objs +1 -0
@@ -144,6 +144,7 @@ trace-events-y += hw/sd/trace-events trace-events-y += hw/isa/trace-events trace-events-y += hw/mem/trace-events trace-events-y += hw/i386/trace-events +trace-events-y += hw/i386/xen/trace-events trace-events-y += hw/9pfs/trace-events trace-events-y += hw/ppc/trace-events trace-events-y += hw/pci/trace-events
hw/i386/trace-events +0 -7
@@ -1,12 +1,5 @@ # See docs/tracing.txt for syntax documentation. -# hw/i386/xen/xen_platform.c -xen_platform_log(char *s) "xen platform: %s" - -# hw/i386/xen/xen_pvdevice.c -xen_pv_mmio_read(uint64_t addr) "WARNING: read from Xen PV Device MMIO space (address %"PRIx64")" -xen_pv_mmio_write(uint64_t addr) "WARNING: write to Xen PV Device MMIO space (address %"PRIx64")" - # hw/i386/x86-iommu.c x86_iommu_iec_notify(bool global, uint32_t index, uint32_t mask) "Notify IEC invalidation: global=%d index=%" PRIu32 " mask=%" PRIu32
hw/i386/xen/trace-events new file +6 -0
@@ -0,0 +1,6 @@ +# hw/i386/xen/xen_platform.c +xen_platform_log(char *s) "xen platform: %s" + +# hw/i386/xen/xen_pvdevice.c +xen_pv_mmio_read(uint64_t addr) "WARNING: read from Xen PV Device MMIO space (address %"PRIx64")" +xen_pv_mmio_write(uint64_t addr) "WARNING: write to Xen PV Device MMIO space (address %"PRIx64")"
Signature · 1 line
2.9.3
Re: [Qemu-devel] [PATCH v3 4/8] trace: move hw/i386/xen events to correct subdir
Quoted 10 lines · Daniel P. Berrange
The trace-events for a given source file should generally always live in the same directory as the source file.
Signed-off-by Daniel P. Berrange <[email protected]>--- Makefile.objs | 1 + hw/i386/trace-events | 7 ------- hw/i386/xen/trace-events | 6 ++++++ 3 files changed, 7 insertions(+), 7 deletions(-) create mode 100644 hw/i386/xen/trace-events
PATCH v3 5/8 trace: move setting of group name into Makefiles
In reply to Daniel P. BerrangeHaving tracetool.py figure out the right group name from just the input filename is not practical when considering the different build vs src path combinations. Instead simply take the group name as a command line arg from the Makefile, which can trivially provide the right name.
--- Makefile.target | 3 +++ scripts/tracetool.py | 23 +++++++++-------------- trace/Makefile.objs | 9 +++++++++ 3 files changed, 21 insertions(+), 14 deletions(-)
Makefile.target +3 -0
@@ -50,6 +50,7 @@ endif $(QEMU_PROG).stp-installed: $(BUILD_DIR)/trace-events-all $(call quiet-command,$(TRACETOOL) \ + --group=all \ --format=stap \ --backends=$(TRACE_BACKENDS) \ --binary=$(bindir)/$(QEMU_PROG) \
@@ -59,6 +60,7 @@ $(QEMU_PROG).stp-installed: $(BUILD_DIR)/trace-events-all $(QEMU_PROG).stp: $(BUILD_DIR)/trace-events-all $(call quiet-command,$(TRACETOOL) \ + --group=all \ --format=stap \ --backends=$(TRACE_BACKENDS) \ --binary=$(realpath .)/$(QEMU_PROG) \
@@ -68,6 +70,7 @@ $(QEMU_PROG).stp: $(BUILD_DIR)/trace-events-all $(QEMU_PROG)-simpletrace.stp: $(BUILD_DIR)/trace-events-all $(call quiet-command,$(TRACETOOL) \ + --group=all \ --format=simpletrace-stap \ --backends=$(TRACE_BACKENDS) \ --probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
scripts/tracetool.py +9 -14
@@ -49,6 +49,7 @@ Options: --binary <path> Full path to QEMU binary. --target-type <type> QEMU emulator target type ('system' or 'user'). --target-name <name> QEMU emulator target name. + --group <name> Name of the event group --probe-prefix <prefix> Prefix for dtrace probe names (default: qemu-<target-type>-<target-name>).\ """ % {
@@ -62,22 +63,12 @@ Options: else: sys.exit(1) -def make_group_name(filename): - dirname = os.path.realpath(os.path.dirname(filename)) - basedir = os.path.join(os.path.dirname(__file__), os.pardir) - basedir = os.path.realpath(os.path.abspath(basedir)) - dirname = dirname[len(basedir) + 1:] - - if dirname == "": - return "common" - return "_" + re.sub(r"[^A-Za-z0-9]", "_", dirname) - def main(args): global _SCRIPT _SCRIPT = args[0] long_opts = ["backends=", "format=", "help", "list-backends", - "check-backends"] + "check-backends", "group="] long_opts += ["binary=", "target-type=", "target-name=", "probe-prefix="] try:
@@ -88,6 +79,7 @@ def main(args): check_backends = False arg_backends = [] arg_format = "" + arg_group = None binary = None target_type = None target_name = None
@@ -98,6 +90,8 @@ def main(args): elif opt == "--backends": arg_backends = arg.split(",") + elif opt == "--group": + arg_group = arg elif opt == "--format": arg_format = arg
@@ -129,6 +123,9 @@ def main(args): sys.exit(1) sys.exit(0) + if arg_group is None: + error_opt("group name is required") + if arg_format == "stap": if binary is None: error_opt("--binary is required for SystemTAP tapset generator")
@@ -145,10 +142,8 @@ def main(args): with open(args[0], "r") as fh: events = tracetool.read_events(fh) - group = make_group_name(args[0]) - try: - tracetool.generate(events, group, arg_format, arg_backends, + tracetool.generate(events, arg_group, arg_format, arg_backends, binary=binary, probe_prefix=probe_prefix) except tracetool.TracetoolError as e: error_opt(str(e))
trace/Makefile.objs +9 -0
@@ -20,6 +20,7 @@ $(obj)/generated-ust-provider.h: $(obj)/generated-ust-provider.h-timestamp @cmp $< $@ >/dev/null 2>&1 || cp $< $@ $(obj)/generated-ust-provider.h-timestamp: $(BUILD_DIR)/trace-events-all $(tracetool-y) $(call quiet-command,$(TRACETOOL) \ + --group=all \ --format=ust-events-h \ --backends=$(TRACE_BACKENDS) \ $< > $@,"GEN","$(patsubst %-timestamp,%,$@)")
@@ -28,6 +29,7 @@ $(obj)/generated-ust.c: $(obj)/generated-ust.c-timestamp $(BUILD_DIR)/config-hos @cmp $< $@ >/dev/null 2>&1 || cp $< $@ $(obj)/generated-ust.c-timestamp: $(BUILD_DIR)/trace-events-all $(tracetool-y) $(call quiet-command,$(TRACETOOL) \ + --group=all \ --format=ust-events-c \ --backends=$(TRACE_BACKENDS) \ $< > $@,"GEN","$(patsubst %-timestamp,%,$@)")
@@ -48,6 +50,7 @@ $(obj)/generated-tracers.h: $(obj)/generated-tracers.h-timestamp @cmp -s $< $@ || cp $< $@ $(obj)/generated-tracers.h-timestamp: $(BUILD_DIR)/trace-events-all $(BUILD_DIR)/config-host.mak $(tracetool-y) $(call quiet-command,$(TRACETOOL) \ + --group=all \ --format=h \ --backends=$(TRACE_BACKENDS) \ $< > $@,"GEN","$(patsubst %-timestamp,%,$@)")
@@ -59,6 +62,7 @@ $(obj)/generated-tracers.c: $(obj)/generated-tracers.c-timestamp @cmp -s $< $@ || cp $< $@ $(obj)/generated-tracers.c-timestamp: $(BUILD_DIR)/trace-events-all $(BUILD_DIR)/config-host.mak $(tracetool-y) $(call quiet-command,$(TRACETOOL) \ + --group=all \ --format=c \ --backends=$(TRACE_BACKENDS) \ $< > $@,"GEN","$(patsubst %-timestamp,%,$@)")
@@ -77,6 +81,7 @@ $(obj)/generated-tracers-dtrace.dtrace: $(obj)/generated-tracers-dtrace.dtrace-t @cmp $< $@ >/dev/null 2>&1 || cp $< $@ $(obj)/generated-tracers-dtrace.dtrace-timestamp: $(BUILD_DIR)/trace-events-all $(BUILD_DIR)/config-host.mak $(tracetool-y) $(call quiet-command,$(TRACETOOL) \ + --group=all \ --format=d \ --backends=$(TRACE_BACKENDS) \ $< > $@,"GEN","$(patsubst %-timestamp,%,$@)")
@@ -96,6 +101,7 @@ $(obj)/generated-helpers-wrappers.h: $(obj)/generated-helpers-wrappers.h-timesta @cmp $< $@ >/dev/null 2>&1 || cp $< $@ $(obj)/generated-helpers-wrappers.h-timestamp: $(BUILD_DIR)/trace-events-all $(BUILD_DIR)/config-host.mak $(tracetool-y) $(call quiet-command,$(TRACETOOL) \ + --group=all \ --format=tcg-helper-wrapper-h \ --backend=$(TRACE_BACKENDS) \ $< > $@,"GEN","$(patsubst %-timestamp,%,$@)")
@@ -104,6 +110,7 @@ $(obj)/generated-helpers.h: $(obj)/generated-helpers.h-timestamp @cmp $< $@ >/dev/null 2>&1 || cp $< $@ $(obj)/generated-helpers.h-timestamp: $(BUILD_DIR)/trace-events-all $(BUILD_DIR)/config-host.mak $(tracetool-y) $(call quiet-command,$(TRACETOOL) \ + --group=all \ --format=tcg-helper-h \ --backend=$(TRACE_BACKENDS) \ $< > $@,"GEN","$(patsubst %-timestamp,%,$@)")
@@ -112,6 +119,7 @@ $(obj)/generated-helpers.c: $(obj)/generated-helpers.c-timestamp @cmp $< $@ >/dev/null 2>&1 || cp $< $@ $(obj)/generated-helpers.c-timestamp: $(BUILD_DIR)/trace-events-all $(BUILD_DIR)/config-host.mak $(tracetool-y) $(call quiet-command,$(TRACETOOL) \ + --group=all \ --format=tcg-helper-c \ --backend=$(TRACE_BACKENDS) \ $< > $@,"GEN","$(patsubst %-timestamp,%,$@)")
@@ -125,6 +133,7 @@ $(obj)/generated-tcg-tracers.h: $(obj)/generated-tcg-tracers.h-timestamp @cmp $< $@ >/dev/null 2>&1 || cp $< $@ $(obj)/generated-tcg-tracers.h-timestamp: $(BUILD_DIR)/trace-events-all $(BUILD_DIR)/config-host.mak $(tracetool-y) $(call quiet-command,$(TRACETOOL) \ + --group=all \ --format=tcg-h \ --backend=$(TRACE_BACKENDS) \ $< > $@,"GEN","$(patsubst %-timestamp,%,$@)")
Signature · 1 line
2.9.3
Re: [Qemu-devel] [PATCH v3 5/8] trace: move setting of group name into Makefiles
Quoted 6 lines · Daniel P. Berrange
Having
tracetool.pyfigure out the right group name from just the input filename is not practical when considering the different build vs src path combinations. Instead simply take the group name as a command line arg from theMakefile, which can trivially provide the right name.
Quoted 6 lines
Signed-off-by Daniel P. Berrange <[email protected]>--- Makefile.target | 3 +++ scripts/tracetool.py | 23 +++++++++-------------- trace/Makefile.objs | 9 +++++++++ 3 files changed, 21 insertions(+), 14 deletions(-)
PATCH v3 6/8 trace: switch to modular code generation for sub-directories
In reply to Daniel P. BerrangeIntroduce rules in the top level Makefile that are able to generate trace.[ch] files in every subdirectory which has a trace-events file.
The top level directory is handled specially, so instead of creating trace.h, it creates trace-root.h. This allows sub-directories to include the top level trace-root.h file, without ambiguity wrt to the trace.g file in the current sub-dir.
--- .gitignore | 22 +++-- Makefile | 156 ++++++++++++++++++++++++++---- Makefile.objs | 102 ++++++++++--------- Makefile.target | 7 +- aio-posix.c | 2 +- balloon.c | 2 +- block.c | 2 +- blockdev-nbd.c | 1 - blockdev.c | 2 +- blockjob.c | 1 - cpu-exec.c | 2 +- dma-helpers.c | 2 +- exec.c | 2 +- hw/net/fsl_etsec/etsec.c | 1 - include/exec/cpu_ldst_template.h | 2 +- include/exec/cpu_ldst_useronly_template.h | 2 +- include/hw/xen/xen_common.h | 2 +- include/trace.h | 6 -- ioport.c | 2 +- kvm-all.c | 2 +- memory.c | 2 +- monitor.c | 2 +- qom/cpu.c | 2 +- scripts/tracetool.py | 8 +- scripts/tracetool/backend/dtrace.py | 7 +- scripts/tracetool/backend/simple.py | 1 - scripts/tracetool/backend/ust.py | 7 +- scripts/tracetool/format/c.py | 7 +- scripts/tracetool/format/tcg_h.py | 6 +- scripts/tracetool/format/tcg_helper_c.py | 6 +- scripts/tracetool/format/ust_events_c.py | 2 +- scripts/tracetool/format/ust_events_h.py | 7 +- spice-qemu-char.c | 2 +- tests/Makefile.include | 2 +- thread-pool.c | 2 +- trace/Makefile.objs | 94 +----------------- trace/control-target.c | 2 +- trace/control.c | 2 +- trace/ftrace.c | 2 +- trace/simple.c | 1 - translate-all.c | 2 +- vl.c | 2 +- xen-hvm.c | 2 +- xen-mapcache.c | 2 +- 44 files changed, 283 insertions(+), 209 deletions(-) delete mode 100644 include/trace.h
.gitignore +16 -6
@@ -6,18 +6,12 @@ /config.status /config-temp /trace-events-all -/trace/generated-tracers.h -/trace/generated-tracers.c -/trace/generated-tracers-dtrace.h -/trace/generated-tracers.dtrace /trace/generated-events.h /trace/generated-events.c /trace/generated-helpers-wrappers.h /trace/generated-helpers.h /trace/generated-helpers.c /trace/generated-tcg-tracers.h -/trace/generated-ust-provider.h -/trace/generated-ust.c /ui/shader/texture-blit-frag.h /ui/shader/texture-blit-vert.h *-timestamp
@@ -120,3 +114,19 @@ tags TAGS docker-src.* *~ +trace.h +trace.c +trace-ust.h +trace-ust.h +trace-dtrace.h +trace-dtrace.dtrace +trace-root.h +trace-root.c +trace-ust-root.h +trace-ust-root.h +trace-ust-all.h +trace-ust-all.c +trace-dtrace-root.h +trace-dtrace-root.dtrace +trace-ust-all.h +trace-ust-all.c
Makefile +137 -19
213 lines not on this page · raw message
Makefile.objs +55 -47
105 lines not on this page · raw message
Makefile.target +5 -2
@@ -186,7 +186,8 @@ dummy := $(call unnest-vars,.., \ qom-obj-y \ io-obj-y \ common-obj-y \ - common-obj-m) + common-obj-m \ + trace-obj-y) target-obj-y := $(target-obj-y-save) all-obj-y += $(common-obj-y) all-obj-y += $(target-obj-y)
@@ -198,8 +199,10 @@ all-obj-$(CONFIG_SOFTMMU) += $(io-obj-y) $(QEMU_PROG_BUILD): config-devices.mak +COMMON_LDADDS = $(trace-obj-y) ../libqemuutil.a ../libqemustub.a + # build either PROG or PROGW -$(QEMU_PROG_BUILD): $(all-obj-y) ../libqemuutil.a ../libqemustub.a +$(QEMU_PROG_BUILD): $(all-obj-y) $(COMMON_LDADDS) $(call LINK, $(filter-out %.mak, $^)) ifdef CONFIG_DARWIN $(call quiet-command,Rez -append $(SRC_PATH)/pc-bios/qemu.rsrc -o $@,"REZ","$(TARGET_DIR)$@")
aio-posix.c +1 -1
@@ -19,7 +19,7 @@#include "qemu/rcu_queue.h" #include "qemu/sockets.h" #include "qemu/cutils.h" -#include "trace.h" +#include "trace-root.h" #ifdef CONFIG_EPOLL_CREATE1 #include <sys/epoll.h> #endif
balloon.c +1 -1
@@ -29,7 +29,7 @@#include "exec/cpu-common.h" #include "sysemu/kvm.h" #include "sysemu/balloon.h" -#include "trace.h" +#include "trace-root.h" #include "qmp-commands.h" #include "qapi/qmp/qerror.h" #include "qapi/qmp/qjson.h"
block.c +1 -1
@@ -22,7 +22,7 @@* THE SOFTWARE. */ #include "qemu/osdep.h" -#include "trace.h" +#include "block/trace.h" #include "block/block_int.h" #include "block/blockjob.h" #include "block/nbd.h"
blockdev-nbd.c +0 -1
@@ -16,7 +16,6 @@#include "qapi/qmp/qerror.h" #include "sysemu/sysemu.h" #include "qmp-commands.h" -#include "trace.h" #include "block/nbd.h" #include "io/channel-socket.h"
blockdev.c +1 -1
@@ -48,7 +48,7 @@#include "sysemu/sysemu.h" #include "block/block_int.h" #include "qmp-commands.h" -#include "trace.h" +#include "block/trace.h" #include "sysemu/arch_init.h" #include "qemu/cutils.h" #include "qemu/help_option.h"
blockjob.c +0 -1
@@ -25,7 +25,6 @@#include "qemu/osdep.h" #include "qemu-common.h" -#include "trace.h" #include "block/block.h" #include "block/blockjob_int.h" #include "block/block_int.h"
cpu-exec.c +1 -1
@@ -18,7 +18,7 @@*/ #include "qemu/osdep.h" #include "cpu.h" -#include "trace.h" +#include "trace-root.h" #include "disas/disas.h" #include "exec/exec-all.h" #include "tcg.h"
dma-helpers.c +1 -1
@@ -10,7 +10,7 @@#include "qemu/osdep.h" #include "sysemu/block-backend.h" #include "sysemu/dma.h" -#include "trace.h" +#include "trace-root.h" #include "qemu/thread.h" #include "qemu/main-loop.h"
exec.c +1 -1
@@ -44,7 +44,7 @@#include "sysemu/dma.h" #include "exec/address-spaces.h" #include "sysemu/xen-mapcache.h" -#include "trace.h" +#include "trace-root.h" #endif #include "exec/cpu-all.h" #include "qemu/rcu_queue.h"
hw/net/fsl_etsec/etsec.c +0 -1
@@ -29,7 +29,6 @@#include "qemu/osdep.h" #include "sysemu/sysemu.h" #include "hw/sysbus.h" -#include "trace.h" #include "hw/ptimer.h" #include "etsec.h" #include "registers.h"
include/exec/cpu_ldst_template.h +1 -1
@@ -25,7 +25,7 @@*/ #if !defined(SOFTMMU_CODE_ACCESS ) -#include "trace.h" +#include "trace-root.h" #endif #include "trace/mem.h"
include/exec/cpu_ldst_useronly_template.h +1 -1
@@ -24,7 +24,7 @@*/ #if !defined(CODE_ACCESS ) -#include "trace.h" +#include "trace-root.h" #endif #include "trace/mem.h"
include/hw/xen/xen_common.h +1 -1
@@ -18,7 +18,7 @@#include "hw/xen/xen.h" #include "hw/pci/pci.h" #include "qemu/queue.h" -#include "trace.h" +#include "hw/xen/trace.h" /* * We don't support Xen prior to 4.2.0.
include/trace.h deleted +0 -6
@@ -1,6 +0,0 @@ -#ifndef TRACE_H -#define TRACE_H - -#include "trace/generated-tracers.h" - -#endif /* TRACE_H */
ioport.c +1 -1
@@ -29,7 +29,7 @@#include "qemu-common.h" #include "cpu.h" #include "exec/ioport.h" -#include "trace.h" +#include "trace-root.h" #include "exec/memory.h" #include "exec/address-spaces.h"
kvm-all.c +1 -1
@@ -34,7 +34,7 @@#include "exec/ram_addr.h" #include "exec/address-spaces.h" #include "qemu/event_notifier.h" -#include "trace.h" +#include "trace-root.h" #include "hw/irq.h" #include "hw/boards.h"
memory.c +1 -1
@@ -24,7 +24,7 @@#include "qemu/bitops.h" #include "qemu/error-report.h" #include "qom/object.h" -#include "trace.h" +#include "trace-root.h" #include "exec/memory-internal.h" #include "exec/ram_addr.h"
monitor.c +1 -1
@@ -59,7 +59,7 @@#include "qapi/qmp/json-streamer.h" #include "qapi/qmp/json-parser.h" #include "qom/object_interfaces.h" -#include "trace.h" +#include "trace-root.h" #include "trace/control.h" #include "monitor/hmp-target.h" #ifdef CONFIG_TRACE_SIMPLE
qom/cpu.c +1 -1
@@ -29,7 +29,7 @@#include "qemu/error-report.h" #include "sysemu/sysemu.h" #include "hw/qdev-properties.h" -#include "trace.h" +#include "trace-root.h" bool cpu_exists (int64_t id) {
scripts/tracetool.py +5 -3
@@ -137,10 +137,12 @@ def main(args): if probe_prefix is None: probe_prefix = ".".join(["qemu", target_type, target_name]) - if len(args) != 1: + if len(args) < 1: error_opt("missing trace-events filepath") - with open(args[0], "r") as fh: - events = tracetool.read_events(fh) + events = [] + for arg in args: + with open(arg, "r") as fh: + events.extend(tracetool.read_events(fh)) try: tracetool.generate(events, arg_group, arg_format, arg_backends,
scripts/tracetool/backend/dtrace.py +6 -1
@@ -36,7 +36,12 @@ def binary(): def generate_h_begin(events, group): - out('#include "trace/generated-tracers-dtrace.h"', + if group == "root": + header = "trace-dtrace-root.h" + else: + header = "trace-dtrace.h" + + out('#include "%s"' % header, '')
scripts/tracetool/backend/simple.py +0 -1
@@ -44,7 +44,6 @@ def generate_h(event, group): def generate_c_begin(events, group): out('#include "qemu/osdep.h"', - '#include "trace.h"', '#include "trace/control.h"', '#include "trace/simple.h"', '')
scripts/tracetool/backend/ust.py +6 -1
@@ -20,8 +20,13 @@ PUBLIC = True def generate_h_begin(events, group): + if group == "root": + header = "trace-ust-root.h" + else: + header = "trace-ust.h" + out('#include <lttng/tracepoint.h>', - '#include "trace/generated-ust-provider.h"', + '#include "%s"' % header, '')
scripts/tracetool/format/c.py +6 -1
@@ -20,10 +20,15 @@ def generate(events, backend, group): active_events = [e for e in events if "disable" not in e.properties] + if group == "root": + header = "trace-root.h" + else: + header = "trace.h" + out('/* This file is autogenerated by tracetool, do not edit. */', '', '#include "qemu/osdep.h"', - '#include "trace.h"', + '#include "%s"' % header, '') for e in events:
scripts/tracetool/format/tcg_h.py +5 -1
@@ -28,13 +28,17 @@ def vcpu_transform_args(args): def generate(events, backend, group): + if group == "root": + header = "trace-root.h" + else: + header = "trace.h" + out('/* This file is autogenerated by tracetool, do not edit. */', '/* You must include this file after the inclusion of helper.h */', '', '#ifndef TRACE_%s_GENERATED_TCG_TRACERS_H' % group.upper(), '#define TRACE_%s_GENERATED_TCG_TRACERS_H' % group.upper(), '', - '#include "trace.h"', '#include "exec/helper-proto.h"', '', )
scripts/tracetool/format/tcg_helper_c.py +5 -1
@@ -41,6 +41,11 @@ def vcpu_transform_args(args, mode): def generate(events, backend, group): + if group == "root": + header = "trace-root.h" + else: + header = "trace.h" + events = [e for e in events if "disable" not in e.properties]
@@ -49,7 +54,6 @@ def generate(events, backend, group): '#include "qemu/osdep.h"', '#include "qemu-common.h"', '#include "cpu.h"', - '#include "trace.h"', '#include "exec/helper-proto.h"', '', )
scripts/tracetool/format/ust_events_c.py +1 -1
@@ -32,4 +32,4 @@ def generate(events, backend, group): ' */', '#pragma GCC diagnostic ignored "-Wredundant-decls"', '', - '#include "generated-ust-provider.h"') + '#include "trace-ust-all.h"')
scripts/tracetool/format/ust_events_h.py +6 -1
@@ -20,13 +20,18 @@ def generate(events, backend, group): events = [e for e in events if "disabled" not in e.properties] + if group == "all": + include = "trace-ust-all.h" + else: + include = "trace-ust.h" + out('/* This file is autogenerated by tracetool, do not edit. */', '', '#undef TRACEPOINT_PROVIDER', '#define TRACEPOINT_PROVIDER qemu', '', '#undef TRACEPOINT_INCLUDE_FILE', - '#define TRACEPOINT_INCLUDE_FILE ./generated-ust-provider.h', + '#define TRACEPOINT_INCLUDE_FILE ./%s' % include, '', '#if !defined (TRACE_%s_GENERATED_UST_H) || \\' % group.upper(), ' defined(TRACEPOINT_HEADER_MULTI_READ)',
spice-qemu-char.c +1 -1
@@ -1,5 +1,5 @@#include "qemu/osdep.h" -#include "trace.h" +#include "trace-root.h" #include "ui/qemu-spice.h" #include "sysemu/char.h" #include <spice.h>
tests/Makefile.include +1 -1
@@ -491,7 +491,7 @@ QEMU_CFLAGS += -I$(SRC_PATH)/tests # Deps that are common to various different sets of tests below -test-util-obj-y = libqemuutil.a libqemustub.a +test-util-obj-y = $(trace-obj-y) libqemuutil.a libqemustub.a test-qom-obj-y = $(qom-obj-y) $(test-util-obj-y) test-qapi-obj-y = tests/test-qapi-visit.o tests/test-qapi-types.o \ tests/test-qapi-event.o tests/test-qmp-introspect.o \
thread-pool.c +1 -1
@@ -19,7 +19,7 @@#include "qemu/queue.h" #include "qemu/thread.h" #include "qemu/coroutine.h" -#include "trace.h" +#include "trace-root.h" #include "block/thread-pool.h" #include "qemu/main-loop.h"
trace/Makefile.objs +5 -89
134 lines not on this page · raw message
trace/control-target.c +1 -1
@@ -9,7 +9,7 @@#include "qemu/osdep.h" #include "cpu.h" -#include "trace.h" +#include "trace-root.h" #include "trace/control.h" #include "translate-all.h"
trace/control.c +1 -1
@@ -26,7 +26,7 @@#include "qemu/error-report.h" #include "qemu/config-file.h" #include "monitor/monitor.h" -#include "trace.h" +#include "trace-root.h" int trace_events_enabled_count;
trace/ftrace.c +1 -1
@@ -10,8 +10,8 @@*/ #include "qemu/osdep.h" -#include "trace.h" #include "trace/control.h" +#include "trace/ftrace.h" int trace_marker_fd;
trace/simple.c +0 -1
@@ -13,7 +13,6 @@#include <pthread.h> #endif #include "qemu/timer.h" -#include "trace.h" #include "trace/control.h" #include "trace/simple.h"
translate-all.c +1 -1
@@ -25,7 +25,7 @@#include "qemu-common.h" #define NO_CPU_IO_DEFS #include "cpu.h" -#include "trace.h" +#include "trace-root.h" #include "disas/disas.h" #include "exec/exec-all.h" #include "tcg.h"
vl.c +1 -1
@@ -110,7 +110,7 @@ int main(int argc, char **argv)#include "slirp/libslirp.h" -#include "trace.h" +#include "trace-root.h" #include "trace/control.h" #include "qemu/queue.h" #include "sysemu/arch_init.h"
xen-hvm.c +1 -1
@@ -22,7 +22,7 @@#include "qemu/error-report.h" #include "qemu/range.h" #include "sysemu/xen-mapcache.h" -#include "trace.h" +#include "trace-root.h" #include "exec/address-spaces.h" #include <xen/hvm/ioreq.h>
xen-mapcache.c +1 -1
@@ -19,7 +19,7 @@#include <xen/hvm/params.h> #include "sysemu/xen-mapcache.h" -#include "trace.h" +#include "trace-root.h" //#define MAPCACHE_DEBUG
Signature · 1 line
2.9.3
Re: [Qemu-devel] [PATCH v3 6/8] trace: switch to modular code generation for sub-directories
Quoted 9 lines · Daniel P Berrange
Introduce rules in the top level
Makefilethat are able to generate trace.[ch] files in every subdirectory which has a trace-events file.The top level directory is handled specially, so instead of creating
trace.h, it createstrace-root.h. This allows sub-directories to include the top leveltrace-root.hfile, without ambiguity wrt to the trace.g file in the current sub-dir.Signed-off-by Daniel P. Berrange <[email protected]>
[...]
Quoted 41 lines
Makefile +14
-9@@ -56,25 +56,136 @@ GENERATED_SOURCES += qmp-marshal.c qapi-types.c qapi-visit.c qapi-event.c GENERATED_HEADERS += qmp-introspect.h GENERATED_SOURCES += qmp-introspect.c -GENERATED_HEADERS += trace/generated-tracers.h -ifeq ($(findstring dtrace,$(TRACE_BACKENDS)),dtrace) -GENERATED_HEADERS += trace/generated-tracers-dtrace.h -endif -GENERATED_SOURCES += trace/generated-tracers.c - GENERATED_HEADERS += trace/generated-tcg-tracers.h GENERATED_HEADERS += trace/generated-helpers-wrappers.h GENERATED_HEADERS += trace/generated-helpers.h GENERATED_SOURCES += trace/generated-helpers.c -ifeq ($(findstring ust,$(TRACE_BACKENDS)),ust) -GENERATED_HEADERS += trace/generated-ust-provider.h -GENERATED_SOURCES += trace/generated-ust.c +ifdef CONFIG_TRACE_UST +GENERATED_HEADERS += trace-ust-all.h +GENERATED_SOURCES += trace-ust-all.c endif GENERATED_HEADERS += module_block.h +TRACE_HEADERS = trace-root.h $(trace-events-subdirs:%=%/trace.h) +TRACE_SOURCES = trace-root.c $(trace-events-subdirs:%=%/trace.c) +TRACE_DTRACE = +ifdef CONFIG_TRACE_DTRACE +TRACE_HEADERS += trace-dtrace-root.h $(trace-events-subdirs:%=%/trace-dtrace.h) +TRACE_DTRACE += trace-dtrace-root.dtrace $(trace-events-subdirs:%=%/trace-dtrace.dtrace) +endif +ifdef CONFIG_TRACE_UST +TRACE_HEADERS += trace-ust-root.h $(trace-events-subdirs:%=%/trace-ust.h) +endif +
Makefile GENERATED_SOURCES += qmp-marshal.c qapi-types.c qapi-visit.c qapi-event.c · line 92
Quoted 10 lines
Makefile +10
-0+GENERATED_HEADERS += $(TRACE_HEADERS) +GENERATED_SOURCES += $(TRACE_SOURCES) + +trace-group-name = $(shell dirname $1 | sed -e 's/[^a-zA-Z0-9]/_/g') + +%/trace.h: %/trace.h-timestamp + @cmp $< $@ >/dev/null 2>&1 || cp $< $@ +%/trace.h-timestamp: $(SRC_PATH)/%/trace-events $(tracetool-y) + $(call quiet-command,$(TRACETOOL) \ + --group=$(call trace-group-name,$@) \
Shouldn't you call trace-group-name with $*? To make sure it only contains the directories *below* SRC_PATH.
Cheers,
Lluis
Re: [Qemu-devel] [PATCH v3 6/8] trace: switch to modular code generation for sub-directories
Quoted 58 lines · Lluís Vilanova
Quoted 9 lines · Daniel P Berrange
Introduce rules in the top level
Makefilethat are able to generate trace.[ch] files in every subdirectory which has a trace-events file.The top level directory is handled specially, so instead of creating
trace.h, it createstrace-root.h. This allows sub-directories to include the top leveltrace-root.hfile, without ambiguity wrt to the trace.g file in the current sub-dir.Signed-off-by Daniel P. Berrange <[email protected]>[...]
Quoted 46 lines
Makefile +19
-9@@ -56,25 +56,136 @@ GENERATED_SOURCES += qmp-marshal.c qapi-types.c qapi-visit.c qapi-event.c GENERATED_HEADERS += qmp-introspect.h GENERATED_SOURCES += qmp-introspect.c -GENERATED_HEADERS += trace/generated-tracers.h -ifeq ($(findstring dtrace,$(TRACE_BACKENDS)),dtrace) -GENERATED_HEADERS += trace/generated-tracers-dtrace.h -endif -GENERATED_SOURCES += trace/generated-tracers.c - GENERATED_HEADERS += trace/generated-tcg-tracers.h GENERATED_HEADERS += trace/generated-helpers-wrappers.h GENERATED_HEADERS += trace/generated-helpers.h GENERATED_SOURCES += trace/generated-helpers.c -ifeq ($(findstring ust,$(TRACE_BACKENDS)),ust) -GENERATED_HEADERS += trace/generated-ust-provider.h -GENERATED_SOURCES += trace/generated-ust.c +ifdef CONFIG_TRACE_UST +GENERATED_HEADERS += trace-ust-all.h +GENERATED_SOURCES += trace-ust-all.c endif GENERATED_HEADERS += module_block.h +TRACE_HEADERS = trace-root.h $(trace-events-subdirs:%=%/trace.h) +TRACE_SOURCES = trace-root.c $(trace-events-subdirs:%=%/trace.c) +TRACE_DTRACE = +ifdef CONFIG_TRACE_DTRACE +TRACE_HEADERS += trace-dtrace-root.h $(trace-events-subdirs:%=%/trace-dtrace.h) +TRACE_DTRACE += trace-dtrace-root.dtrace $(trace-events-subdirs:%=%/trace-dtrace.dtrace) +endif +ifdef CONFIG_TRACE_UST +TRACE_HEADERS += trace-ust-root.h $(trace-events-subdirs:%=%/trace-ust.h) +endif + +GENERATED_HEADERS += $(TRACE_HEADERS) +GENERATED_SOURCES += $(TRACE_SOURCES) + +trace-group-name = $(shell dirname $1 | sed -e 's/[^a-zA-Z0-9]/_/g') +
Quoted 8 lines
Makefile GENERATED_SOURCES += qmp-marshal.c qapi-types.c qapi-visit.c qapi-event.c · line 92
Quoted 5 lines
Makefile +5
-0+%/trace.h: %/trace.h-timestamp + @cmp $< $@ >/dev/null 2>&1 || cp $< $@ +%/trace.h-timestamp: $(SRC_PATH)/%/trace-events $(tracetool-y) + $(call quiet-command,$(TRACETOOL) \ + --group=$(call trace-group-name,$@) \Shouldn't you call trace-group-name with $*? To make sure it only contains the directories *below*
SRC_PATH.
$@ is a relative path already
Regards,
Daniel
Signature · 3 lines
|: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://entangle-photo.org -o- http://search.cpan.org/~danberr/ :|
Re: [Qemu-devel] [PATCH v3 6/8] trace: switch to modular code generation for sub-directories
In reply to Daniel P. BerrangeQuoted 48 lines · Daniel P. Berrange
Introduce rules in the top level
Makefilethat are able to generate trace.[ch] files in every subdirectory which has a trace-events file.The top level directory is handled specially, so instead of creating
trace.h, it createstrace-root.h. This allows sub-directories to include the top leveltrace-root.hfile, without ambiguity wrt to the trace.g file in the current sub-dir.Signed-off-by Daniel P. Berrange <[email protected]>--- .gitignore | 22 +++-- Makefile | 156 ++++++++++++++++++++++++++---- Makefile.objs | 102 ++++++++++--------- Makefile.target | 7 +- aio-posix.c | 2 +- balloon.c | 2 +- block.c | 2 +- blockdev-nbd.c | 1 - blockdev.c | 2 +- blockjob.c | 1 - cpu-exec.c | 2 +- dma-helpers.c | 2 +- exec.c | 2 +- hw/net/fsl_etsec/etsec.c | 1 - include/exec/cpu_ldst_template.h | 2 +- include/exec/cpu_ldst_useronly_template.h | 2 +- include/hw/xen/xen_common.h | 2 +- include/trace.h | 6 -- ioport.c | 2 +- kvm-all.c | 2 +- memory.c | 2 +- monitor.c | 2 +- qom/cpu.c | 2 +- scripts/tracetool.py | 8 +- scripts/tracetool/backend/dtrace.py | 7 +- scripts/tracetool/backend/simple.py | 1 - scripts/tracetool/backend/ust.py | 7 +- scripts/tracetool/format/c.py | 7 +- scripts/tracetool/format/tcg_h.py | 6 +- scripts/tracetool/format/tcg_helper_c.py | 6 +- scripts/tracetool/format/ust_events_c.py | 2 +- scripts/tracetool/format/ust_events_h.py | 7 +- spice-qemu-char.c | 2 +- tests/Makefile.include | 2 +- thread-pool.c | 2 +- trace/Makefile.objs | 94 +----------------- trace/control-target.c | 2 +- trace/control.c | 2 +-
Quoted 8 lines
trace/ftrace.c | 2 +- trace/simple.c | 1 - translate-all.c | 2 +- vl.c | 2 +- xen-hvm.c | 2 +- xen-mapcache.c | 2 +- 44 files changed, 283 insertions(+), 209 deletions(-) delete mode 100644 include/trace.h
PATCH v3 7/8 trace: update docs to reflect new code generation approach
In reply to Daniel P. BerrangeDescribe use of per-subdir trace events files and how it impacts code generation.
--- docs/tracing.txt | 55 ++++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 44 insertions(+), 11 deletions(-)
docs/tracing.txt +44 -11
@@ -27,18 +27,44 @@ for debugging, profiling, and observing execution. == Trace events == -Each directory in the source tree can declare a set of static trace events -in a "trace-events" file. Each trace event declaration names the event, its -arguments, and the format string which can be used for pretty-printing: +=== Sub-directory setup === - qemu_vmalloc(size_t size, void *ptr) "size %zu ptr %p" - qemu_vfree(void *ptr) "ptr %p" - -All "trace-events" files must be listed in the "trace-event-y" make variable -in the top level Makefile.objs. During build the individual files are combined -to create a "trace-events-all" file, which is processed by the "tracetool" -script during build to generate code for the trace events. The -"trace-events-all" file is also installed into "/usr/share/qemu". +Each directory in the source tree can declare a set of static trace events +in a local "trace-events" file. All directories which contain "trace-events" +files must be listed in the "trace-events-subdirs" make variable in the top +level Makefile.objs. During build, the "trace-events" file in each listed +subdirectory will be processed by the "tracetool" script to generate code for +the trace events. + +The individual "trace-events" files are merged into a "trace-events-all" file, +which is also installed into "/usr/share/qemu" with the name "trace-events". +This merged file is to be used by the "simpletrace.py" script to later analyse +traces in the simpletrace data format. + +In the sub-directory the following files will be automatically generated + + - trace.c - the trace event state declarations + - trace.h - the trace event enums and probe functions + - trace-dtrace.h - DTrace event probe specification + - trace-dtrace.dtrace - DTrace event probe helper declaration + - trace-dtrace.o - binary DTrace provider (generated by dtrace) + - trace-ust.h - UST event probe helper declarations + +Source files in the sub-directory should #include the local 'trace.h' file, +without any sub-directory path prefix. eg io/channel-buffer.c would do + + #include "trace.h" + +To access the 'io/trace.h' file. While it is possible to include a trace.h +file from outside a source files' own sub-directory, this is discouraged in +general. It is strongly preferred that all events be declared directly in +the sub-directory that uses them. The only exception is where there are some +shared trace events defined in the top level directory trace-events file. +The top level directory generates trace files with a filename prefix of +"trace-root" instead of just "trace". This is to avoid ambiguity between +a trace.h in the current directory, vs the top level directory. + +=== Using trace events === Trace events are invoked directly from source code like this:
@@ -83,6 +109,13 @@ Format strings should reflect the types defined in the trace event. Take special care to use PRId64 and PRIu64 for int64_t and uint64_t types, respectively. This ensures portability between 32- and 64-bit platforms. +Each event declaration will start with the event name, then its arguments, +finally a format string for pretty-printing. For example: + + qemu_vmalloc(size_t size, void *ptr) "size %zu ptr %p" + qemu_vfree(void *ptr) "ptr %p" + + === Hints for adding new trace events === 1. Trace state changes in the code. Interesting points in the code usually
Signature · 1 line
2.9.3
Re: [Qemu-devel] [PATCH v3 7/8] trace: update docs to reflect new code generation approach
Quoted 7 lines · Daniel P. Berrange
Describe use of per-subdir trace events files and how it impacts code generation.
Signed-off-by Daniel P. Berrange <[email protected]>--- docs/tracing.txt | 55 ++++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 44 insertions(+), 11 deletions(-)
PATCH v3 8/8 trace: improve error reporting when parsing simpletrace header
In reply to Daniel P. BerrangeWhen loading a simpletrace binary file we just report "Not a valid trace file!" which is not very helpful. Report exactly which field we found to be invalid.
--- scripts/simpletrace.py | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
scripts/simpletrace.py +7 -3
@@ -73,10 +73,14 @@ def read_record(edict, idtoname, fobj): def read_trace_header(fobj): """Read and verify trace file header""" header = read_header(fobj, log_header_fmt) - if header is None or \ - header[0] != header_event_id or \ - header[1] != header_magic: + if header is None: raise ValueError('Not a valid trace file!') + if header[0] != header_event_id: + raise ValueError('Not a valid trace file, header id %d != %d' % + (header[0], header_event_id)) + if header[1] != header_magic: + raise ValueError('Not a valid trace file, header magic %d != %d' % + (header[1], header_magic)) log_version = header[2] if log_version not in [0, 2, 3, 4]:
Signature · 1 line
2.9.3
Re: [Qemu-devel] [PATCH v3 8/8] trace: improve error reporting when parsing simpletrace header
Quoted 9 lines · Daniel P. Berrange
When loading a simpletrace binary file we just report "Not a valid trace file!" which is not very helpful. Report exactly which field we found to be invalid.
Reviewed-by Eric Blake <[email protected]>Signed-off-by Daniel P. Berrange <[email protected]>--- scripts/simpletrace.py | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
Quoted 92 lines · Daniel P. Berrange
This is the final part of my trace events refactoring.
Previously we merged code that split trace-events up into one file per sub-directory. We also merged code to the code-generator that enables us to generate and use multiple independant sets of trace events.
This is the final glue that makes use of these two earlier changes, so that we actually generate a separate
trace.h&trace.cfile per sub-directory.The result is that when adding a new trace event to a file, only files in that sub-directory get rebuilt. Theoretically the build is faster too, since each source file includes a much smaller
trace.hthat only contains probes relevant to it. In reality this speed benefit is probably marginal & lost in the noise.This patch series has massively changed since v2.
- It no longer modifies the Makefile.objs rules in each sub-directory. A bit of magic in the top level Makefile.objs file lets us generate all the needed rules from one place
- It sticks with bare "
trace.h" includes instead of adding sub-dir prefix "hw/block/trace.h". To achieve this we had to rename thetrace.htotrace-root.hin the top level directory to avoid ambiguity in places where a file needs to include the top-level instead of localtrace.hDaniel P. Berrange (8):
make: move top level dir to end of include search path
trace: move hw/block/dataplane events to correct subdir
trace: move hw/xen events to correct subdir
trace: move hw/i386/xen events to correct subdir
trace: move setting of group name into Makefiles
trace: switch to modular code generation for sub-directories
trace: update docs to reflect new code generation approach
trace: improve error reporting when parsing simpletrace header.gitignore | 22 +++-- Makefile | 156 ++++++++++++++++++++++++++---- Makefile.objs | 99 ++++++++++--------- Makefile.target | 10 +- aio-posix.c | 2 +- balloon.c | 2 +- block.c | 2 +- blockdev-nbd.c | 1 - blockdev.c | 2 +- blockjob.c | 1 - cpu-exec.c | 2 +- dma-helpers.c | 2 +- docs/tracing.txt | 55 ++++++++--- exec.c | 2 +- hw/block/dataplane/trace-events | 6 ++ hw/block/trace-events | 5 - hw/i386/trace-events | 7 -- hw/i386/xen/trace-events | 6 ++ hw/net/fsl_etsec/etsec.c | 1 - hw/xen/trace-events | 13 +++ include/exec/cpu_ldst_template.h | 2 +- include/exec/cpu_ldst_useronly_template.h | 2 +- include/hw/xen/xen_common.h | 2 +- include/trace.h | 6 -- ioport.c | 2 +- kvm-all.c | 2 +- memory.c | 2 +- monitor.c | 2 +- qom/cpu.c | 2 +- rules.mak | 17 ++-- scripts/simpletrace.py | 10 +- scripts/tracetool.py | 31 +++--- scripts/tracetool/backend/dtrace.py | 7 +- scripts/tracetool/backend/simple.py | 1 - scripts/tracetool/backend/ust.py | 7 +- scripts/tracetool/format/c.py | 7 +- scripts/tracetool/format/tcg_h.py | 6 +- scripts/tracetool/format/tcg_helper_c.py | 6 +- scripts/tracetool/format/ust_events_c.py | 2 +- scripts/tracetool/format/ust_events_h.py | 7 +- spice-qemu-char.c | 2 +- tests/Makefile.include | 2 +- thread-pool.c | 2 +- trace-events | 10 -- trace/Makefile.objs | 93 ++---------------- trace/control-target.c | 2 +- trace/control.c | 2 +- trace/ftrace.c | 2 +- trace/simple.c | 1 - translate-all.c | 2 +-
Quoted 8 lines
vl.c | 2 +- xen-hvm.c | 2 +- xen-mapcache.c | 2 +- 53 files changed, 385 insertions(+), 258 deletions(-) create mode 100644 hw/block/dataplane/trace-events create mode 100644 hw/i386/xen/trace-events create mode 100644 hw/xen/trace-events delete mode 100644 include/trace.h
Looks good, I hope to merge v4. Thanks for investigating all the Makefile cruft needed to simplify this.
Stefan