Add support for Legacy HDMI audio drivers
Subsystems (5)
v5 cover Add support for Legacy HDMI audio drivers
Legacy (CherryTrail/ Baytrail) HDMI audio drivers added Legacy hdmi audio-Gfx interaction/ interfacing is updated to use irq chip framework
This patch series has only been tested on hardware with
a single HDMI connector/pipe and additional work may be needed for newer machines with 2 connectors
Jerome Anand (5):
drm/i915: setup bridge for HDMI LPE audio driver drm/i915: Add support for audio driver notifications
ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T
ALSA: x86: hdmi: Add audio support for BYT and CHT
ALSA: x86: hdmi: continue playback even when display resolution
changes
Documentation/gpu/i915.rst | 9 + drivers/gpu/drm/i915/Makefile | 3 + drivers/gpu/drm/i915/i915_drv.c | 4 +- drivers/gpu/drm/i915/i915_drv.h | 13 + drivers/gpu/drm/i915/i915_irq.c | 16 + drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_audio.c | 31 + drivers/gpu/drm/i915/intel_drv.h | 2 + drivers/gpu/drm/i915/intel_hdmi.c | 1 + drivers/gpu/drm/i915/intel_lpe_audio.c | 370 +++++++ include/drm/intel_lpe_audio.h | 46 + sound/Kconfig | 2 + sound/Makefile | 2 +- sound/x86/Kconfig | 15 + sound/x86/Makefile | 6 + sound/x86/intel_hdmi_audio.c | 1870 ++++++++++++++++++++++++++++++++ sound/x86/intel_hdmi_audio.h | 197 ++++ sound/x86/intel_hdmi_audio_if.c | 551 ++++++++++ sound/x86/intel_hdmi_lpe_audio.c | 617 +++++++++++ sound/x86/intel_hdmi_lpe_audio.h | 683 ++++++++++++ 20 files changed, 4438 insertions(+), 3 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_lpe_audio.c create mode 100644 include/drm/intel_lpe_audio.h create mode 100644 sound/x86/Kconfig create mode 100644 sound/x86/Makefile create mode 100644 sound/x86/intel_hdmi_audio.c create mode 100644 sound/x86/intel_hdmi_audio.h create mode 100644 sound/x86/intel_hdmi_audio_if.c create mode 100644 sound/x86/intel_hdmi_lpe_audio.c create mode 100644 sound/x86/intel_hdmi_lpe_audio.h
Signature · 7 lines
2.9.3 base-commit: c34072a82a390d575f7f0394fcf92437898d75d3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v5 1/5 drm/i915: setup bridge for HDMI LPE audio driver
Enable support for HDMI LPE audio mode on Baytrail and Cherrytrail when HDaudio controller is not detected
Setup minimum required resources during i915_driver_load:
1. Create a platform device to share MMIO/IRQ resources
2. Make the platform device child of i915 device for runtime PM.
3. Create IRQ chip to forward HDMI LPE audio irqs.
HDMI LPE audio driver (a standalone sound driver) probes the LPE audio device and creates a new sound card.
--- Documentation/gpu/i915.rst | 9 + drivers/gpu/drm/i915/Makefile | 3 + drivers/gpu/drm/i915/i915_drv.c | 4 +- drivers/gpu/drm/i915/i915_drv.h | 11 ++ drivers/gpu/drm/i915/i915_irq.c | 16 ++ drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_audio.c | 25 +++ drivers/gpu/drm/i915/intel_drv.h | 2 + drivers/gpu/drm/i915/intel_lpe_audio.c | 321 +++++++++++++++++++++++++++++++++ include/drm/intel_lpe_audio.h | 46 +++++ 10 files changed, 438 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_lpe_audio.c create mode 100644 include/drm/intel_lpe_audio.h
Documentation/gpu/i915.rst +9 -0
@@ -225,6 +225,15 @@ Display PLLs .. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.h :internal: +intel hdmi lpe audio support +---------------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :doc: LPE Audio integration for HDMI or DP playback + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :internal: + Memory Management and Command Submission ========================================
drivers/gpu/drm/i915/Makefile +3 -0
@@ -129,6 +129,9 @@ i915-y += intel_gvt.o include $(src)/gvt/Makefile endif +# LPE Audio for VLV and CHT +i915-y += intel_lpe_audio.o + obj-$(CONFIG_DRM_I915) += i915.o CFLAGS_i915_trace_points.o := -I$(src)
drivers/gpu/drm/i915/i915_drv.c +2 -2
@@ -1140,7 +1140,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)if (IS_GEN5 (dev_priv))intel_gpu_ips_init (dev_priv); -i915_audio_component_init (dev_priv); +intel_audio_init (dev_priv);/* * Some ports require correctly set-up hpd registers for detection to
@@ -1158,7 +1158,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)*/ static void i915_driver_unregister (struct drm_i915_private *dev_priv) { -i915_audio_component_cleanup (dev_priv); +intel_audio_deinit (dev_priv);intel_gpu_ips_teardown ();acpi_video_unregister ();
drivers/gpu/drm/i915/i915_drv.h +11 -0
@@ -2454,6 +2454,12 @@ struct drm_i915_private {/* Used to save the pipe-to-encoder mapping for audio */ struct intel_encoder *av_enc_map[I915_MAX_PIPES ]; +/* necessary resource sharing with HDMI LPE audio driver. */ +struct { +struct platform_device *platdev; +int irq; + } lpe_audio; +/* * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch * will be rejected. Instead look for a better place.
@@ -3592,6 +3598,11 @@ extern int i915_restore_state(struct drm_i915_private *dev_priv);void i915_setup_sysfs (struct drm_i915_private *dev_priv);void i915_teardown_sysfs (struct drm_i915_private *dev_priv); +/* intel_lpe_audio.c */ +int intel_lpe_audio_init (struct drm_i915_private *dev_priv); +void intel_lpe_audio_teardown (struct drm_i915_private *dev_priv); +void intel_lpe_audio_irq_handler (struct drm_i915_private *dev_priv); +/* intel_i2c.c */ extern int intel_setup_gmbus (struct drm_i915_private *dev_priv);extern void intel_teardown_gmbus (struct drm_i915_private *dev_priv);
drivers/gpu/drm/i915/i915_irq.c +16 -0
@@ -1926,6 +1926,10 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg)* signalled in iir */ valleyview_pipestat_irq_ack (dev_priv, iir, pipe_stats); +if (iir & (I915_LPE_PIPE_A_INTERRUPT | +I915_LPE_PIPE_B_INTERRUPT )) +intel_lpe_audio_irq_handler (dev_priv); +/* * VLV_IIR is single buffered, and reflects the level * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last.
@@ -2006,6 +2010,11 @@ static irqreturn_t cherryview_irq_handler(int irq, void *arg)* signalled in iir */ valleyview_pipestat_irq_ack (dev_priv, iir, pipe_stats); +if (iir & (I915_LPE_PIPE_A_INTERRUPT | +I915_LPE_PIPE_B_INTERRUPT | +I915_LPE_PIPE_C_INTERRUPT )) +intel_lpe_audio_irq_handler (dev_priv); +/* * VLV_IIR is single buffered, and reflects the level * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last.
@@ -2948,6 +2957,7 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv)u32 pipestat_mask;u32 enable_mask;enum pipe pipe; +u32 val; pipestat_mask =PLANE_FLIP_DONE_INT_STATUS_VLV |PIPE_CRC_DONE_INTERRUPT_STATUS ;
@@ -2964,6 +2974,12 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv)WARN_ON (dev_priv->irq_mask != ~0 ); + val = (I915_LPE_PIPE_A_INTERRUPT | +I915_LPE_PIPE_B_INTERRUPT | +I915_LPE_PIPE_C_INTERRUPT ); + + enable_mask |= val; + dev_priv->irq_mask = ~enable_mask;GEN5_IRQ_INIT (VLV_ , dev_priv->irq_mask, enable_mask);
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -2428,6 +2428,9 @@ enum skl_disp_power_wells {#define I915_ASLE_INTERRUPT (1<<0)#define I915_BSD_USER_INTERRUPT (1<<25) +#define I915_HDMI_LPE_AUDIO_BASE (VLV_DISPLAY_BASE + 0x65000) +#define I915_HDMI_LPE_AUDIO_SIZE 0x1000 +#define GEN6_BSD_RNCID _MMIO(0x12198)#define GEN7_FF_THREAD_MODE _MMIO(0x20a0)
drivers/gpu/drm/i915/intel_audio.c +25 -0
@@ -956,3 +956,28 @@ void i915_audio_component_cleanup(struct drm_i915_private *dev_priv)component_del (dev_priv->drm.dev, &i915_audio_component_bind_ops); dev_priv->audio_component_registered = false; } + +/** +* intel_audio_init() - Initialize the audio driver either using +* component framework or using lpe audio bridge +* @dev_priv: the i915 drm device private data +* +*/ +void intel_audio_init (struct drm_i915_private *dev_priv) +{ +if (intel_lpe_audio_init (dev_priv) <0 ) +i915_audio_component_init (dev_priv); +} + +/** +* intel_audio_deinit() - deinitialize the audio driver +* @dev_priv: the i915 drm device private data +* +*/ +void intel_audio_deinit (struct drm_i915_private *dev_priv) +{ +if ((dev_priv)->lpe_audio.platdev !=NULL ) +intel_lpe_audio_teardown (dev_priv); +else +i915_audio_component_cleanup (dev_priv); +}
drivers/gpu/drm/i915/intel_drv.h +2 -0
@@ -1225,6 +1225,8 @@ void intel_audio_codec_enable(struct intel_encoder *encoder,void intel_audio_codec_disable (struct intel_encoder *encoder);void i915_audio_component_init (struct drm_i915_private *dev_priv);void i915_audio_component_cleanup (struct drm_i915_private *dev_priv); +void intel_audio_init (struct drm_i915_private *dev_priv); +void intel_audio_deinit (struct drm_i915_private *dev_priv);/* intel_display.c */ enum transcoder intel_crtc_pch_transcoder (struct intel_crtc *crtc);
drivers/gpu/drm/i915/intel_lpe_audio.c new file +321 -0
321 lines not on this page · raw message
include/drm/intel_lpe_audio.h new file +46 -0
46 lines not on this page · raw message
Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v5 1/5] drm/i915: setup bridge for HDMI LPE audio driver
Quoted 8 lines · Jerome Anand
Enable support for HDMI LPE audio mode on Baytrail and Cherrytrail when HDaudio controller is not detected
Setup minimum required resources during
i915_driver_load:
1. Create a platform device to share MMIO/IRQ resources
2. Make the platform device child of i915 device for runtime PM.
3. Create IRQ chip to forward HDMI LPE audio irqs.
Quoted 5 lines
HDMI LPE audio driver (a standalone sound driver) probes the LPE audio device and creates a new sound card.
Signed-off-by Pierre-Louis Bossart <[email protected]>Signed-off-by Jerome Anand <[email protected]>
Quoted 587 lines
--- Documentation/gpu/i915.rst | 9 + drivers/gpu/drm/i915/Makefile | 3 + drivers/gpu/drm/i915/i915_drv.c | 4 +- drivers/gpu/drm/i915/i915_drv.h | 11 ++ drivers/gpu/drm/i915/i915_irq.c | 16 ++ drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_audio.c | 25 +++ drivers/gpu/drm/i915/intel_drv.h | 2 + drivers/gpu/drm/i915/intel_lpe_audio.c | 321 +++++++++++++++++++++++++++++++++ include/drm/intel_lpe_audio.h | 46 +++++ 10 files changed, 438 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_lpe_audio.c create mode 100644 include/drm/intel_lpe_audio.hDocumentation/gpu/i915.rst +9
-0@@ -225,6 +225,15 @@ Display PLLs .. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.h :internal: +intel hdmi lpe audio support +---------------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :doc: LPE Audio integration for HDMI or DP playback + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :internal: + Memory Management and Command Submission ========================================drivers/gpu/drm/i915/Makefile +3
-0@@ -129,6 +129,9 @@ i915-y += intel_gvt.o include $(src)/gvt/Makefile endif +# LPE Audio for VLV and CHT +i915-y += intel_lpe_audio.o + obj-$(CONFIG_DRM_I915) += i915.o CFLAGS_i915_trace_points.o := -I$(src)drivers/gpu/drm/i915/i915_drv.c +2
-2@@ -1140,7 +1140,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)if (IS_GEN5 (dev_priv))intel_gpu_ips_init (dev_priv); -i915_audio_component_init (dev_priv); +intel_audio_init (dev_priv);/* * Some ports require correctly set-up hpd registers for detection to @@ -1158,7 +1158,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)*/ static void i915_driver_unregister (struct drm_i915_private *dev_priv) { -i915_audio_component_cleanup (dev_priv); +intel_audio_deinit (dev_priv);intel_gpu_ips_teardown ();acpi_video_unregister ();drivers/gpu/drm/i915/i915_drv.h +11
-0@@ -2454,6 +2454,12 @@ struct drm_i915_private {/* Used to save the pipe-to-encoder mapping for audio */ struct intel_encoder *av_enc_map[I915_MAX_PIPES ]; +/* necessary resource sharing with HDMI LPE audio driver. */ +struct { +struct platform_device *platdev; +int irq; + } lpe_audio; +/* * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch * will be rejected. Instead look for a better place. @@ -3592,6 +3598,11 @@ extern int i915_restore_state(struct drm_i915_private *dev_priv);void i915_setup_sysfs (struct drm_i915_private *dev_priv);void i915_teardown_sysfs (struct drm_i915_private *dev_priv); +/* intel_lpe_audio.c */ +int intel_lpe_audio_init (struct drm_i915_private *dev_priv); +void intel_lpe_audio_teardown (struct drm_i915_private *dev_priv); +void intel_lpe_audio_irq_handler (struct drm_i915_private *dev_priv); +/* intel_i2c.c */ extern int intel_setup_gmbus (struct drm_i915_private *dev_priv);extern void intel_teardown_gmbus (struct drm_i915_private *dev_priv);drivers/gpu/drm/i915/i915_irq.c +16
-0@@ -1926,6 +1926,10 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg)* signalled in iir */ valleyview_pipestat_irq_ack (dev_priv, iir, pipe_stats); +if (iir & (I915_LPE_PIPE_A_INTERRUPT | +I915_LPE_PIPE_B_INTERRUPT )) +intel_lpe_audio_irq_handler (dev_priv); +/* * VLV_IIR is single buffered, and reflects the level * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last. @@ -2006,6 +2010,11 @@ static irqreturn_t cherryview_irq_handler(int irq, void *arg)* signalled in iir */ valleyview_pipestat_irq_ack (dev_priv, iir, pipe_stats); +if (iir & (I915_LPE_PIPE_A_INTERRUPT | +I915_LPE_PIPE_B_INTERRUPT | +I915_LPE_PIPE_C_INTERRUPT )) +intel_lpe_audio_irq_handler (dev_priv); +/* * VLV_IIR is single buffered, and reflects the level * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last. @@ -2948,6 +2957,7 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv)u32 pipestat_mask;u32 enable_mask;enum pipe pipe; +u32 val; pipestat_mask =PLANE_FLIP_DONE_INT_STATUS_VLV |PIPE_CRC_DONE_INTERRUPT_STATUS ;@@ -2964,6 +2974,12 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv)WARN_ON (dev_priv->irq_mask != ~0 ); + val = (I915_LPE_PIPE_A_INTERRUPT | +I915_LPE_PIPE_B_INTERRUPT | +I915_LPE_PIPE_C_INTERRUPT ); + + enable_mask |= val; + dev_priv->irq_mask = ~enable_mask;GEN5_IRQ_INIT (VLV_ , dev_priv->irq_mask, enable_mask);drivers/gpu/drm/i915/i915_reg.h +3
-0@@ -2428,6 +2428,9 @@ enum skl_disp_power_wells {#define I915_ASLE_INTERRUPT (1<<0)#define I915_BSD_USER_INTERRUPT (1<<25) +#define I915_HDMI_LPE_AUDIO_BASE (VLV_DISPLAY_BASE + 0x65000) +#define I915_HDMI_LPE_AUDIO_SIZE 0x1000 +#define GEN6_BSD_RNCID _MMIO(0x12198)#define GEN7_FF_THREAD_MODE _MMIO(0x20a0)drivers/gpu/drm/i915/intel_audio.c +25
-0@@ -956,3 +956,28 @@ void i915_audio_component_cleanup(struct drm_i915_private *dev_priv)component_del (dev_priv->drm.dev, &i915_audio_component_bind_ops); dev_priv->audio_component_registered = false; } + +/** +* intel_audio_init() - Initialize the audio driver either using +* component framework or using lpe audio bridge +* @dev_priv: the i915 drm device private data +* +*/ +void intel_audio_init (struct drm_i915_private *dev_priv) +{ +if (intel_lpe_audio_init (dev_priv) <0 ) +i915_audio_component_init (dev_priv); +} + +/** +* intel_audio_deinit() - deinitialize the audio driver +* @dev_priv: the i915 drm device private data +* +*/ +void intel_audio_deinit (struct drm_i915_private *dev_priv) +{ +if ((dev_priv)->lpe_audio.platdev !=NULL ) +intel_lpe_audio_teardown (dev_priv); +else +i915_audio_component_cleanup (dev_priv); +}drivers/gpu/drm/i915/intel_drv.h +2
-0@@ -1225,6 +1225,8 @@ void intel_audio_codec_enable(struct intel_encoder *encoder,void intel_audio_codec_disable (struct intel_encoder *encoder);void i915_audio_component_init (struct drm_i915_private *dev_priv);void i915_audio_component_cleanup (struct drm_i915_private *dev_priv); +void intel_audio_init (struct drm_i915_private *dev_priv); +void intel_audio_deinit (struct drm_i915_private *dev_priv);/* intel_display.c */ enum transcoder intel_crtc_pch_transcoder (struct intel_crtc *crtc);drivers/gpu/drm/i915/intel_lpe_audio.c new file +321
-0@@ -0,0 +1,321 @@ +/* +* Copyright © 2016 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next +* paragraph) shall be included in all copies or substantial portions of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +* IN THE SOFTWARE. +* +* Authors: +* Pierre-Louis Bossart <[email protected]> +* Jerome Anand <[email protected]> +* based on VED patches +* +*/ + +/** +* DOC: LPE Audio integration for HDMI or DP playback +* +* Motivation: +* Atom platforms (e.g. valleyview and cherryTrail) integrates a DMA-based +* interface as an alternative to the traditional HDaudio path. While this +* mode is unrelated to the LPE aka SST audio engine, the documentation refers +* to this mode as LPE so we keep this notation for the sake of consistency. +* +* The interface is handled by a separate standalone driver maintained in the +* ALSA subsystem for simplicity. To minimize the interaction between the two +* subsystems, a bridge is setup between the hdmi-lpe-audio and i915: +* 1. Create a platform device to share MMIO/IRQ resources +* 2. Make the platform device child of i915 device for runtime PM. +* 3. Create IRQ chip to forward the LPE audio irqs. +* the hdmi-lpe-audio driver probes the lpe audio device and creates a new +* sound card +* +* Threats: +* Due to the restriction in Linux platform device model, user need manually +* uninstall the hdmi-lpe-audio driver before uninstalling i915 module, +* otherwise we might run into use-after-free issues after i915 removes the +* platform device: even though hdmi-lpe-audio driver is released, the modules +* is still in "installed" status. +* +* Implementation: +* The MMIO/REG platform resources are created according to the registers +* specification. +* When forwarding LPE audio irqs, the flow control handler selection depends +* on the platform, for example on valleyview handle_simple_irq is enough. +* +*/ + +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/pci.h> + +#include "i915_drv.h" +#include <linux/delay.h> +#include <drm/intel_lpe_audio.h> + +#define HAS_LPE_AUDIO (dev_priv) ((dev_priv)->lpe_audio.platdev != NULL) + +static struct platform_device * +lpe_audio_platdev_create (struct drm_i915_private *dev_priv) +{ +int ret; +struct drm_device *dev = &dev_priv->drm; +struct platform_device_info pinfo = {}; +struct resource *rsc; +struct platform_device *platdev; +struct intel_hdmi_lpe_audio_pdata *pdata; + + pdata =kzalloc (sizeof (*pdata),GFP_KERNEL ); +if (!pdata) +return ERR_PTR (-ENOMEM ); + + rsc =kcalloc (2 ,sizeof (*rsc),GFP_KERNEL ); +if (!rsc) { +kfree (pdata); +return ERR_PTR (-ENOMEM ); + } + + rsc[0 ].start = rsc[0 ].end = dev_priv->lpe_audio.irq; + rsc[0 ].flags =IORESOURCE_IRQ ; + rsc[0 ].name ="hdmi-lpe-audio-irq" ; + + rsc[1 ].start =pci_resource_start (dev->pdev,0 ) + +I915_HDMI_LPE_AUDIO_BASE ; + rsc[1 ].end =pci_resource_start (dev->pdev,0 ) + +I915_HDMI_LPE_AUDIO_BASE +I915_HDMI_LPE_AUDIO_SIZE -1 ; + rsc[1 ].flags =IORESOURCE_MEM ; + rsc[1 ].name ="hdmi-lpe-audio-mmio" ; + + pinfo.parent = dev->dev; + pinfo.name ="hdmi-lpe-audio" ; + pinfo.id =-1 ; + pinfo.res = rsc; + pinfo.num_res =2 ; + pinfo.data = pdata; + pinfo.size_data =sizeof (*pdata); + pinfo.dma_mask =DMA_BIT_MASK (32 ); + +spin_lock_init (&pdata->lpe_audio_slock); + + platdev =platform_device_register_full (&pinfo); +if (IS_ERR (platdev)) { + ret =PTR_ERR (platdev); +DRM_ERROR ("Failed to allocate LPE audio platform device\n" ); + goto err; + } + +kfree (rsc); + +return platdev; + +err: +kfree (rsc); +kfree (pdata); +return ERR_PTR (ret); +} + +static void lpe_audio_platdev_destroy (struct drm_i915_private *dev_priv) +{ +platform_device_unregister (dev_priv->lpe_audio.platdev); +kfree (dev_priv->lpe_audio.platdev->dev.dma_mask); +} + +static void lpe_audio_irq_unmask (struct irq_data *d) +{ +struct drm_i915_private *dev_priv = d->chip_data; +unsigned long irqflags; +u32 val = (I915_LPE_PIPE_A_INTERRUPT | +I915_LPE_PIPE_B_INTERRUPT ); + +if (IS_CHERRYVIEW (dev_priv)) + val |=I915_LPE_PIPE_C_INTERRUPT ; + +spin_lock_irqsave (&dev_priv->irq_lock, irqflags); + + dev_priv->irq_mask &= ~val; +I915_WRITE (VLV_IIR , val); +I915_WRITE (VLV_IIR , val); +I915_WRITE (VLV_IMR , dev_priv->irq_mask); +POSTING_READ (VLV_IMR ); + +spin_unlock_irqrestore (&dev_priv->irq_lock, irqflags); +} + +static void lpe_audio_irq_mask (struct irq_data *d) +{ +struct drm_i915_private *dev_priv = d->chip_data; +unsigned long irqflags; +u32 val = (I915_LPE_PIPE_A_INTERRUPT | +I915_LPE_PIPE_B_INTERRUPT ); + +if (IS_CHERRYVIEW (dev_priv)) + val |=I915_LPE_PIPE_C_INTERRUPT ; + +spin_lock_irqsave (&dev_priv->irq_lock, irqflags); + + dev_priv->irq_mask |= val; +I915_WRITE (VLV_IMR , dev_priv->irq_mask); +I915_WRITE (VLV_IIR , val); +I915_WRITE (VLV_IIR , val); +POSTING_READ (VLV_IIR ); + +spin_unlock_irqrestore (&dev_priv->irq_lock, irqflags); +} + +static struct irq_chip lpe_audio_irqchip = { + .name ="hdmi_lpe_audio_irqchip" , + .irq_mask = lpe_audio_irq_mask, + .irq_unmask = lpe_audio_irq_unmask, +}; + +static int lpe_audio_irq_init (struct drm_i915_private *dev_priv) +{ +int irq = dev_priv->lpe_audio.irq; + +WARN_ON (!intel_irqs_enabled (dev_priv)); +irq_set_chip_and_handler_name (irq, + &lpe_audio_irqchip, + handle_simple_irq, +"hdmi_lpe_audio_irq_handler" ); + +return irq_set_chip_data (irq, dev_priv); +} + +static bool lpe_audio_detect (struct drm_i915_private *dev_priv) +{ +int lpe_present = false; + +if (IS_VALLEYVIEW (dev_priv) ||IS_CHERRYVIEW (dev_priv)) { +static const struct pci_device_id atom_hdaudio_ids[] = { +/* Baytrail */ + {PCI_DEVICE (PCI_VENDOR_ID_INTEL ,0x0f04 )}, +/* Braswell */ + {PCI_DEVICE (PCI_VENDOR_ID_INTEL ,0x2284 )}, + {} + }; + +if (!pci_dev_present (atom_hdaudio_ids)) { +DRM_INFO ("%s\n" ,"HDaudio controller not detected, using LPE audio instead\n" ); + lpe_present = true; + } + } +return lpe_present; +} + +static int lpe_audio_setup (struct drm_i915_private *dev_priv) +{ +int ret; + + dev_priv->lpe_audio.irq =irq_alloc_desc (0 ); +if (dev_priv->lpe_audio.irq <0 ) { +DRM_ERROR ("Failed to allocate IRQ desc: %d\n" , + dev_priv->lpe_audio.irq); + ret = dev_priv->lpe_audio.irq; + goto err; + } + +DRM_DEBUG ("irq = %d\n" , dev_priv->lpe_audio.irq); + + ret =lpe_audio_irq_init (dev_priv); + +if (ret) { +DRM_ERROR ("Failed to initialize irqchip for lpe audio: %d\n" , + ret); + goto err_free_irq; + } + + dev_priv->lpe_audio.platdev =lpe_audio_platdev_create (dev_priv); + +if (IS_ERR (dev_priv->lpe_audio.platdev)) { + ret =PTR_ERR (dev_priv->lpe_audio.platdev); +DRM_ERROR ("Failed to create lpe audio platform device: %d\n" , + ret); + goto err_free_irq; + } + +return 0 ; +err_free_irq: +irq_free_desc (dev_priv->lpe_audio.irq); +err: + dev_priv->lpe_audio.irq =-1 ; + dev_priv->lpe_audio.platdev =NULL ; +return ret; +} + +/** +* intel_lpe_audio_irq_handler() - forwards the LPE audio irq +* @dev_priv: the i915 drm device private data +* +* the LPE Audio irq is forwarded to the irq handler registered by LPE audio +* driver. +*/ +void intel_lpe_audio_irq_handler (struct drm_i915_private *dev_priv) +{ +int ret; + +if (!HAS_LPE_AUDIO (dev_priv)) +return ; + + ret =generic_handle_irq (dev_priv->lpe_audio.irq); +if (ret) +DRM_ERROR_RATELIMITED ("error handling LPE audio irq: %d\n" , + ret); +} + +/** +* intel_lpe_audio_init() - detect and setup the bridge between HDMI LPE Audio +* driver and i915 +* @dev_priv: the i915 drm device private data +* +* Return: 0 if successful. non-zero if detection or +* llocation/initialization fails +*/ +int intel_lpe_audio_init (struct drm_i915_private *dev_priv) +{ +int ret = -ENODEV ; + +if (lpe_audio_detect (dev_priv)) { + ret =lpe_audio_setup (dev_priv); +if (ret <0 ) +DRM_ERROR ("failed to setup LPE Audio bridge\n" ); + } +return ret; +} + +/** +* intel_lpe_audio_teardown() - destroy the bridge between HDMI LPE +* audio driver and i915 +* @dev_priv: the i915 drm device private data +* +* release all the resources for LPE audio <-> i915 bridge. +*/ +void intel_lpe_audio_teardown (struct drm_i915_private *dev_priv) +{ +struct irq_desc *desc; + +if (!HAS_LPE_AUDIO (dev_priv)) +return ; + + desc =irq_to_desc (dev_priv->lpe_audio.irq); + +lpe_audio_irq_mask (&desc->irq_data); + +lpe_audio_platdev_destroy (dev_priv); + +irq_free_desc (dev_priv->lpe_audio.irq); +}include/drm/intel_lpe_audio.h new file +46
-0@@ -0,0 +1,46 @@ +/* +* Copyright © 2016 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next +* paragraph) shall be included in all copies or substantial portions of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +* IN THE SOFTWARE. +*/ + +#ifndef _INTEL_LPE_AUDIO_H_ +#define _INTEL_LPE_AUDIO_H_ + +#include <linux/types.h> +#include <linux/spinlock_types.h> + +#define HDMI_MAX_ELD_BYTES 128 + +struct intel_hdmi_lpe_audio_eld { +int port_id; +unsigned char eld_data[HDMI_MAX_ELD_BYTES ]; +}; + +struct intel_hdmi_lpe_audio_pdata { +bool notify_pending; +int tmds_clock_speed; +bool hdmi_connected; +struct intel_hdmi_lpe_audio_eld eld; +void (*notify_audio_lpe)(void *audio_ptr); +spinlock_t lpe_audio_slock; +}; + +#endif /* _I915_LPE_AUDIO_H_ */
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v5 1/5] drm/i915: setup bridge for HDMI LPE audio driver
Quoted 40 lines · Jani Nikula
Quoted 8 lines · Jerome Anand
Enable support for HDMI LPE audio mode on Baytrail and Cherrytrail when HDaudio controller is not detected
Setup minimum required resources during
i915_driver_load:
1. Create a platform device to share MMIO/IRQ resources
2. Make the platform device child of i915 device for runtime PM.
3. Create IRQ chip to forward HDMI LPE audio irqs.Quoted 5 lines
HDMI LPE audio driver (a standalone sound driver) probes the LPE audio device and creates a new sound card.
Signed-off-by Pierre-Louis Bossart <[email protected]>Signed-off-by Jerome Anand <[email protected]>Acked-by Jani Nikula <[email protected]>Quoted 23 lines
--- Documentation/gpu/i915.rst | 9 + drivers/gpu/drm/i915/Makefile | 3 + drivers/gpu/drm/i915/i915_drv.c | 4 +- drivers/gpu/drm/i915/i915_drv.h | 11 ++ drivers/gpu/drm/i915/i915_irq.c | 16 ++ drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_audio.c | 25 +++ drivers/gpu/drm/i915/intel_drv.h | 2 + drivers/gpu/drm/i915/intel_lpe_audio.c | 321 +++++++++++++++++++++++++++++++++ include/drm/intel_lpe_audio.h | 46 +++++ 10 files changed, 438 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_lpe_audio.c create mode 100644 include/drm/intel_lpe_audio.hDocumentation/gpu/i915.rst +0
-0@@ -225,6 +225,15 @@ Display PLLs .. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.h :internal:
Quoted 9 lines
Documentation/gpu/i915.rst Display PLLs · line 236
Quoted 9 lines
Documentation/gpu/i915.rst +9
-0+intel hdmi lpe audio support +---------------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :doc: LPE Audio integration for HDMI or DP playback + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :internal: +
Please apply a follow-up patch to move this next to the chapter about hda audio, because that makes imo more sense than just semi-randomly adding it at the end of the chapter. And it would avoid a silly conflict with stuff in drm-intel.git, which indeed should be here.
Thanks, Daniel
Quoted 562 lines
Quoted 555 lines
Documentation/gpu/i915.rst +0
-0Memory Management and Command Submission ========================================drivers/gpu/drm/i915/Makefile +3
-0@@ -129,6 +129,9 @@ i915-y += intel_gvt.o include $(src)/gvt/Makefile endif +# LPE Audio for VLV and CHT +i915-y += intel_lpe_audio.o + obj-$(CONFIG_DRM_I915) += i915.o CFLAGS_i915_trace_points.o := -I$(src)drivers/gpu/drm/i915/i915_drv.c +2
-2@@ -1140,7 +1140,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)if (IS_GEN5 (dev_priv))intel_gpu_ips_init (dev_priv); -i915_audio_component_init (dev_priv); +intel_audio_init (dev_priv);/* * Some ports require correctly set-up hpd registers for detection to @@ -1158,7 +1158,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)*/ static void i915_driver_unregister (struct drm_i915_private *dev_priv) { -i915_audio_component_cleanup (dev_priv); +intel_audio_deinit (dev_priv);intel_gpu_ips_teardown ();acpi_video_unregister ();drivers/gpu/drm/i915/i915_drv.h +11
-0@@ -2454,6 +2454,12 @@ struct drm_i915_private {/* Used to save the pipe-to-encoder mapping for audio */ struct intel_encoder *av_enc_map[I915_MAX_PIPES ]; +/* necessary resource sharing with HDMI LPE audio driver. */ +struct { +struct platform_device *platdev; +int irq; + } lpe_audio; +/* * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch * will be rejected. Instead look for a better place. @@ -3592,6 +3598,11 @@ extern int i915_restore_state(struct drm_i915_private *dev_priv);void i915_setup_sysfs (struct drm_i915_private *dev_priv);void i915_teardown_sysfs (struct drm_i915_private *dev_priv); +/* intel_lpe_audio.c */ +int intel_lpe_audio_init (struct drm_i915_private *dev_priv); +void intel_lpe_audio_teardown (struct drm_i915_private *dev_priv); +void intel_lpe_audio_irq_handler (struct drm_i915_private *dev_priv); +/* intel_i2c.c */ extern int intel_setup_gmbus (struct drm_i915_private *dev_priv);extern void intel_teardown_gmbus (struct drm_i915_private *dev_priv);drivers/gpu/drm/i915/i915_irq.c +16
-0@@ -1926,6 +1926,10 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg)* signalled in iir */ valleyview_pipestat_irq_ack (dev_priv, iir, pipe_stats); +if (iir & (I915_LPE_PIPE_A_INTERRUPT | +I915_LPE_PIPE_B_INTERRUPT )) +intel_lpe_audio_irq_handler (dev_priv); +/* * VLV_IIR is single buffered, and reflects the level * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last. @@ -2006,6 +2010,11 @@ static irqreturn_t cherryview_irq_handler(int irq, void *arg)* signalled in iir */ valleyview_pipestat_irq_ack (dev_priv, iir, pipe_stats); +if (iir & (I915_LPE_PIPE_A_INTERRUPT | +I915_LPE_PIPE_B_INTERRUPT | +I915_LPE_PIPE_C_INTERRUPT )) +intel_lpe_audio_irq_handler (dev_priv); +/* * VLV_IIR is single buffered, and reflects the level * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last. @@ -2948,6 +2957,7 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv)u32 pipestat_mask;u32 enable_mask;enum pipe pipe; +u32 val; pipestat_mask =PLANE_FLIP_DONE_INT_STATUS_VLV |PIPE_CRC_DONE_INTERRUPT_STATUS ;@@ -2964,6 +2974,12 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv)WARN_ON (dev_priv->irq_mask != ~0 ); + val = (I915_LPE_PIPE_A_INTERRUPT | +I915_LPE_PIPE_B_INTERRUPT | +I915_LPE_PIPE_C_INTERRUPT ); + + enable_mask |= val; + dev_priv->irq_mask = ~enable_mask;GEN5_IRQ_INIT (VLV_ , dev_priv->irq_mask, enable_mask);drivers/gpu/drm/i915/i915_reg.h +3
-0@@ -2428,6 +2428,9 @@ enum skl_disp_power_wells {#define I915_ASLE_INTERRUPT (1<<0)#define I915_BSD_USER_INTERRUPT (1<<25) +#define I915_HDMI_LPE_AUDIO_BASE (VLV_DISPLAY_BASE + 0x65000) +#define I915_HDMI_LPE_AUDIO_SIZE 0x1000 +#define GEN6_BSD_RNCID _MMIO(0x12198)#define GEN7_FF_THREAD_MODE _MMIO(0x20a0)drivers/gpu/drm/i915/intel_audio.c +25
-0@@ -956,3 +956,28 @@ void i915_audio_component_cleanup(struct drm_i915_private *dev_priv)component_del (dev_priv->drm.dev, &i915_audio_component_bind_ops); dev_priv->audio_component_registered = false; } + +/** +* intel_audio_init() - Initialize the audio driver either using +* component framework or using lpe audio bridge +* @dev_priv: the i915 drm device private data +* +*/ +void intel_audio_init (struct drm_i915_private *dev_priv) +{ +if (intel_lpe_audio_init (dev_priv) <0 ) +i915_audio_component_init (dev_priv); +} + +/** +* intel_audio_deinit() - deinitialize the audio driver +* @dev_priv: the i915 drm device private data +* +*/ +void intel_audio_deinit (struct drm_i915_private *dev_priv) +{ +if ((dev_priv)->lpe_audio.platdev !=NULL ) +intel_lpe_audio_teardown (dev_priv); +else +i915_audio_component_cleanup (dev_priv); +}drivers/gpu/drm/i915/intel_drv.h +2
-0@@ -1225,6 +1225,8 @@ void intel_audio_codec_enable(struct intel_encoder *encoder,void intel_audio_codec_disable (struct intel_encoder *encoder);void i915_audio_component_init (struct drm_i915_private *dev_priv);void i915_audio_component_cleanup (struct drm_i915_private *dev_priv); +void intel_audio_init (struct drm_i915_private *dev_priv); +void intel_audio_deinit (struct drm_i915_private *dev_priv);/* intel_display.c */ enum transcoder intel_crtc_pch_transcoder (struct intel_crtc *crtc);drivers/gpu/drm/i915/intel_lpe_audio.c new file +321
-0@@ -0,0 +1,321 @@ +/* +* Copyright © 2016 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next +* paragraph) shall be included in all copies or substantial portions of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +* IN THE SOFTWARE. +* +* Authors: +* Pierre-Louis Bossart <[email protected]> +* Jerome Anand <[email protected]> +* based on VED patches +* +*/ + +/** +* DOC: LPE Audio integration for HDMI or DP playback +* +* Motivation: +* Atom platforms (e.g. valleyview and cherryTrail) integrates a DMA-based +* interface as an alternative to the traditional HDaudio path. While this +* mode is unrelated to the LPE aka SST audio engine, the documentation refers +* to this mode as LPE so we keep this notation for the sake of consistency. +* +* The interface is handled by a separate standalone driver maintained in the +* ALSA subsystem for simplicity. To minimize the interaction between the two +* subsystems, a bridge is setup between the hdmi-lpe-audio and i915: +* 1. Create a platform device to share MMIO/IRQ resources +* 2. Make the platform device child of i915 device for runtime PM. +* 3. Create IRQ chip to forward the LPE audio irqs. +* the hdmi-lpe-audio driver probes the lpe audio device and creates a new +* sound card +* +* Threats: +* Due to the restriction in Linux platform device model, user need manually +* uninstall the hdmi-lpe-audio driver before uninstalling i915 module, +* otherwise we might run into use-after-free issues after i915 removes the +* platform device: even though hdmi-lpe-audio driver is released, the modules +* is still in "installed" status. +* +* Implementation: +* The MMIO/REG platform resources are created according to the registers +* specification. +* When forwarding LPE audio irqs, the flow control handler selection depends +* on the platform, for example on valleyview handle_simple_irq is enough. +* +*/ + +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/pci.h> + +#include "i915_drv.h" +#include <linux/delay.h> +#include <drm/intel_lpe_audio.h> + +#define HAS_LPE_AUDIO (dev_priv) ((dev_priv)->lpe_audio.platdev != NULL) + +static struct platform_device * +lpe_audio_platdev_create (struct drm_i915_private *dev_priv) +{ +int ret; +struct drm_device *dev = &dev_priv->drm; +struct platform_device_info pinfo = {}; +struct resource *rsc; +struct platform_device *platdev; +struct intel_hdmi_lpe_audio_pdata *pdata; + + pdata =kzalloc (sizeof (*pdata),GFP_KERNEL ); +if (!pdata) +return ERR_PTR (-ENOMEM ); + + rsc =kcalloc (2 ,sizeof (*rsc),GFP_KERNEL ); +if (!rsc) { +kfree (pdata); +return ERR_PTR (-ENOMEM ); + } + + rsc[0 ].start = rsc[0 ].end = dev_priv->lpe_audio.irq; + rsc[0 ].flags =IORESOURCE_IRQ ; + rsc[0 ].name ="hdmi-lpe-audio-irq" ; + + rsc[1 ].start =pci_resource_start (dev->pdev,0 ) + +I915_HDMI_LPE_AUDIO_BASE ; + rsc[1 ].end =pci_resource_start (dev->pdev,0 ) + +I915_HDMI_LPE_AUDIO_BASE +I915_HDMI_LPE_AUDIO_SIZE -1 ; + rsc[1 ].flags =IORESOURCE_MEM ; + rsc[1 ].name ="hdmi-lpe-audio-mmio" ; + + pinfo.parent = dev->dev; + pinfo.name ="hdmi-lpe-audio" ; + pinfo.id =-1 ; + pinfo.res = rsc; + pinfo.num_res =2 ; + pinfo.data = pdata; + pinfo.size_data =sizeof (*pdata); + pinfo.dma_mask =DMA_BIT_MASK (32 ); + +spin_lock_init (&pdata->lpe_audio_slock); + + platdev =platform_device_register_full (&pinfo); +if (IS_ERR (platdev)) { + ret =PTR_ERR (platdev); +DRM_ERROR ("Failed to allocate LPE audio platform device\n" ); + goto err; + } + +kfree (rsc); + +return platdev; + +err: +kfree (rsc); +kfree (pdata); +return ERR_PTR (ret); +} + +static void lpe_audio_platdev_destroy (struct drm_i915_private *dev_priv) +{ +platform_device_unregister (dev_priv->lpe_audio.platdev); +kfree (dev_priv->lpe_audio.platdev->dev.dma_mask); +} + +static void lpe_audio_irq_unmask (struct irq_data *d) +{ +struct drm_i915_private *dev_priv = d->chip_data; +unsigned long irqflags; +u32 val = (I915_LPE_PIPE_A_INTERRUPT | +I915_LPE_PIPE_B_INTERRUPT ); + +if (IS_CHERRYVIEW (dev_priv)) + val |=I915_LPE_PIPE_C_INTERRUPT ; + +spin_lock_irqsave (&dev_priv->irq_lock, irqflags); + + dev_priv->irq_mask &= ~val; +I915_WRITE (VLV_IIR , val); +I915_WRITE (VLV_IIR , val); +I915_WRITE (VLV_IMR , dev_priv->irq_mask); +POSTING_READ (VLV_IMR ); + +spin_unlock_irqrestore (&dev_priv->irq_lock, irqflags); +} + +static void lpe_audio_irq_mask (struct irq_data *d) +{ +struct drm_i915_private *dev_priv = d->chip_data; +unsigned long irqflags; +u32 val = (I915_LPE_PIPE_A_INTERRUPT | +I915_LPE_PIPE_B_INTERRUPT ); + +if (IS_CHERRYVIEW (dev_priv)) + val |=I915_LPE_PIPE_C_INTERRUPT ; + +spin_lock_irqsave (&dev_priv->irq_lock, irqflags); + + dev_priv->irq_mask |= val; +I915_WRITE (VLV_IMR , dev_priv->irq_mask); +I915_WRITE (VLV_IIR , val); +I915_WRITE (VLV_IIR , val); +POSTING_READ (VLV_IIR ); + +spin_unlock_irqrestore (&dev_priv->irq_lock, irqflags); +} + +static struct irq_chip lpe_audio_irqchip = { + .name ="hdmi_lpe_audio_irqchip" , + .irq_mask = lpe_audio_irq_mask, + .irq_unmask = lpe_audio_irq_unmask, +}; + +static int lpe_audio_irq_init (struct drm_i915_private *dev_priv) +{ +int irq = dev_priv->lpe_audio.irq; + +WARN_ON (!intel_irqs_enabled (dev_priv)); +irq_set_chip_and_handler_name (irq, + &lpe_audio_irqchip, + handle_simple_irq, +"hdmi_lpe_audio_irq_handler" ); + +return irq_set_chip_data (irq, dev_priv); +} + +static bool lpe_audio_detect (struct drm_i915_private *dev_priv) +{ +int lpe_present = false; + +if (IS_VALLEYVIEW (dev_priv) ||IS_CHERRYVIEW (dev_priv)) { +static const struct pci_device_id atom_hdaudio_ids[] = { +/* Baytrail */ + {PCI_DEVICE (PCI_VENDOR_ID_INTEL ,0x0f04 )}, +/* Braswell */ + {PCI_DEVICE (PCI_VENDOR_ID_INTEL ,0x2284 )}, + {} + }; + +if (!pci_dev_present (atom_hdaudio_ids)) { +DRM_INFO ("%s\n" ,"HDaudio controller not detected, using LPE audio instead\n" ); + lpe_present = true; + } + } +return lpe_present; +} + +static int lpe_audio_setup (struct drm_i915_private *dev_priv) +{ +int ret; + + dev_priv->lpe_audio.irq =irq_alloc_desc (0 ); +if (dev_priv->lpe_audio.irq <0 ) { +DRM_ERROR ("Failed to allocate IRQ desc: %d\n" , + dev_priv->lpe_audio.irq); + ret = dev_priv->lpe_audio.irq; + goto err; + } + +DRM_DEBUG ("irq = %d\n" , dev_priv->lpe_audio.irq); + + ret =lpe_audio_irq_init (dev_priv); + +if (ret) { +DRM_ERROR ("Failed to initialize irqchip for lpe audio: %d\n" , + ret); + goto err_free_irq; + } + + dev_priv->lpe_audio.platdev =lpe_audio_platdev_create (dev_priv); + +if (IS_ERR (dev_priv->lpe_audio.platdev)) { + ret =PTR_ERR (dev_priv->lpe_audio.platdev); +DRM_ERROR ("Failed to create lpe audio platform device: %d\n" , + ret); + goto err_free_irq; + } + +return 0 ; +err_free_irq: +irq_free_desc (dev_priv->lpe_audio.irq); +err: + dev_priv->lpe_audio.irq =-1 ; + dev_priv->lpe_audio.platdev =NULL ; +return ret; +} + +/** +* intel_lpe_audio_irq_handler() - forwards the LPE audio irq +* @dev_priv: the i915 drm device private data +* +* the LPE Audio irq is forwarded to the irq handler registered by LPE audio +* driver. +*/ +void intel_lpe_audio_irq_handler (struct drm_i915_private *dev_priv) +{ +int ret; + +if (!HAS_LPE_AUDIO (dev_priv)) +return ; + + ret =generic_handle_irq (dev_priv->lpe_audio.irq); +if (ret) +DRM_ERROR_RATELIMITED ("error handling LPE audio irq: %d\n" , + ret); +} + +/** +* intel_lpe_audio_init() - detect and setup the bridge between HDMI LPE Audio +* driver and i915 +* @dev_priv: the i915 drm device private data +* +* Return: 0 if successful. non-zero if detection or +* llocation/initialization fails +*/ +int intel_lpe_audio_init (struct drm_i915_private *dev_priv) +{ +int ret = -ENODEV ; + +if (lpe_audio_detect (dev_priv)) { + ret =lpe_audio_setup (dev_priv); +if (ret <0 ) +DRM_ERROR ("failed to setup LPE Audio bridge\n" ); + } +return ret; +} + +/** +* intel_lpe_audio_teardown() - destroy the bridge between HDMI LPE +* audio driver and i915 +* @dev_priv: the i915 drm device private data +* +* release all the resources for LPE audio <-> i915 bridge. +*/ +void intel_lpe_audio_teardown (struct drm_i915_private *dev_priv) +{ +struct irq_desc *desc; + +if (!HAS_LPE_AUDIO (dev_priv)) +return ; + + desc =irq_to_desc (dev_priv->lpe_audio.irq); + +lpe_audio_irq_mask (&desc->irq_data); + +lpe_audio_platdev_destroy (dev_priv); + +irq_free_desc (dev_priv->lpe_audio.irq); +}include/drm/intel_lpe_audio.h new file +46
-0@@ -0,0 +1,46 @@ +/* +* Copyright © 2016 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next +* paragraph) shall be included in all copies or substantial portions of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +* IN THE SOFTWARE. +*/ + +#ifndef _INTEL_LPE_AUDIO_H_ +#define _INTEL_LPE_AUDIO_H_ + +#include <linux/types.h> +#include <linux/spinlock_types.h> + +#define HDMI_MAX_ELD_BYTES 128 + +struct intel_hdmi_lpe_audio_eld { +int port_id; +unsigned char eld_data[HDMI_MAX_ELD_BYTES ]; +}; + +struct intel_hdmi_lpe_audio_pdata { +bool notify_pending; +int tmds_clock_speed; +bool hdmi_connected; +struct intel_hdmi_lpe_audio_eld eld; +void (*notify_audio_lpe)(void *audio_ptr); +spinlock_t lpe_audio_slock; +}; + +#endif /* _I915_LPE_AUDIO_H_ */ Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v5 1/5] drm/i915: setup bridge for HDMI LPE audio driver
Quoted 42 lines · Daniel Vetter
Quoted 40 lines · Jani Nikula
Quoted 8 lines · Jerome Anand
Enable support for HDMI LPE audio mode on Baytrail and Cherrytrail when HDaudio controller is not detected
Setup minimum required resources during
i915_driver_load:
1. Create a platform device to share MMIO/IRQ resources
2. Make the platform device child of i915 device for runtime PM.
3. Create IRQ chip to forward HDMI LPE audio irqs.Quoted 5 lines
HDMI LPE audio driver (a standalone sound driver) probes the LPE audio device and creates a new sound card.
Signed-off-by Pierre-Louis Bossart <[email protected]>Signed-off-by Jerome Anand <[email protected]>Acked-by Jani Nikula <[email protected]>Quoted 23 lines
--- Documentation/gpu/i915.rst | 9 + drivers/gpu/drm/i915/Makefile | 3 + drivers/gpu/drm/i915/i915_drv.c | 4 +- drivers/gpu/drm/i915/i915_drv.h | 11 ++ drivers/gpu/drm/i915/i915_irq.c | 16 ++ drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_audio.c | 25 +++ drivers/gpu/drm/i915/intel_drv.h | 2 + drivers/gpu/drm/i915/intel_lpe_audio.c | 321 +++++++++++++++++++++++++++++++++ include/drm/intel_lpe_audio.h | 46 +++++ 10 files changed, 438 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_lpe_audio.c create mode 100644 include/drm/intel_lpe_audio.hDocumentation/gpu/i915.rst +0
-0@@ -225,6 +225,15 @@ Display PLLs .. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.h :internal:
Quoted 14 lines
Quoted 9 lines
Documentation/gpu/i915.rst Display PLLs · line 236
Quoted 9 lines
Documentation/gpu/i915.rst +9
-0+intel hdmi lpe audio support +---------------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :doc: LPE Audio integration for HDMI or DP playback + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :internal: +Please apply a follow-up patch to move this next to the chapter about hda audio, because that makes imo more sense than just semi-randomly adding it at the end of the chapter. And it would avoid a silly conflict with stuff in drm-intel.git, which indeed should be here.
OK, how about the one below?
thanks,
Takashi
-- 8< --
From: Takashi Iwai <[email protected]>
Subject: [PATCH] Documentation/gpu: Move LPE audio section after HD-audio
As Daniel suggested, it makes more sense and reduces the conflicts.
Also, while we're at it, tidy up the section title from all lower letters.
--- Documentation/gpu/i915.rst | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
Documentation/gpu/i915.rst +9 -9
@@ -144,6 +144,15 @@ High Definition Audio .. kernel-doc:: include/drm/i915_component.h :internal: +Intel HDMI LPE Audio Support +---------------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :doc: LPE Audio integration for HDMI or DP playback + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :internal: + Panel Self Refresh PSR (PSR/SRD) --------------------------------
@@ -213,15 +222,6 @@ Video BIOS Table (VBT) .. kernel-doc:: drivers/gpu/drm/i915/intel_vbt_defs.h :internal: -intel hdmi lpe audio support ----------------------------- - -.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c - :doc: LPE Audio integration for HDMI or DP playback - -.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c - :internal: - Memory Management and Command Submission ========================================
Signature · 6 lines
2.11.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerRe: [PATCH v5 1/5] drm/i915: setup bridge for HDMI LPE audio driver
Quoted 85 lines · Takashi Iwai
Quoted 42 lines · Daniel Vetter
Quoted 40 lines · Jani Nikula
Quoted 8 lines · Jerome Anand
Enable support for HDMI LPE audio mode on Baytrail and Cherrytrail when HDaudio controller is not detected
Setup minimum required resources during
i915_driver_load:
1. Create a platform device to share MMIO/IRQ resources
2. Make the platform device child of i915 device for runtime PM.
3. Create IRQ chip to forward HDMI LPE audio irqs.Quoted 5 lines
HDMI LPE audio driver (a standalone sound driver) probes the LPE audio device and creates a new sound card.
Signed-off-by Pierre-Louis Bossart <[email protected]>Signed-off-by Jerome Anand <[email protected]>Acked-by Jani Nikula <[email protected]>Quoted 23 lines
--- Documentation/gpu/i915.rst | 9 + drivers/gpu/drm/i915/Makefile | 3 + drivers/gpu/drm/i915/i915_drv.c | 4 +- drivers/gpu/drm/i915/i915_drv.h | 11 ++ drivers/gpu/drm/i915/i915_irq.c | 16 ++ drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_audio.c | 25 +++ drivers/gpu/drm/i915/intel_drv.h | 2 + drivers/gpu/drm/i915/intel_lpe_audio.c | 321 +++++++++++++++++++++++++++++++++ include/drm/intel_lpe_audio.h | 46 +++++ 10 files changed, 438 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_lpe_audio.c create mode 100644 include/drm/intel_lpe_audio.hDocumentation/gpu/i915.rst +0
-0@@ -225,6 +225,15 @@ Display PLLs .. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.h :internal:Quoted 14 lines
Quoted 9 lines
Documentation/gpu/i915.rst High Definition Audio · line 155
Quoted 9 lines
Documentation/gpu/i915.rst +9
-0+intel hdmi lpe audio support +---------------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :doc: LPE Audio integration for HDMI or DP playback + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :internal: +Please apply a follow-up patch to move this next to the chapter about hda audio, because that makes imo more sense than just semi-randomly adding it at the end of the chapter. And it would avoid a silly conflict with stuff in drm-intel.git, which indeed should be here.
OK, how about the one below?
thanks,
Takashi
-- 8< --
From: Takashi Iwai <[email protected]>
Subject: [PATCH]Documentation/gpu: Move LPE audio section after HD-audioAs Daniel suggested, it makes more sense and reduces the conflicts.
Also, while we're at it, tidy up the section title from all lower letters.
Signed-off-by Takashi Iwai <[email protected]>--- Documentation/gpu/i915.rst | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)Documentation/gpu/i915.rst +0
-0
Documentation/gpu/i915.rst High Definition Audio · line 151
Quoted 8 lines
Documentation/gpu/i915.rst +5
-0@@ -144,6 +144,15 @@ High Definition Audio .. kernel-doc:: include/drm/i915_component.h :internal: +Intel HDMI LPE Audio Support +---------------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :doc: LPE Audio integration for HDMI or DP playback
^^
While at it, please fix the double space (it was in the original already).
And sorry & thanks for the extra trouble after I already acked this.
BR,
Jani.
Quoted 22 lines
Documentation/gpu/i915.rst +4
-9+ +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :internal: + Panel Self Refresh PSR (PSR/SRD) --------------------------------@@ -213,15 +222,6 @@ Video BIOS Table (VBT) .. kernel-doc:: drivers/gpu/drm/i915/intel_vbt_defs.h :internal: -intel hdmi lpe audio support ----------------------------- - -.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c - :doc: LPE Audio integration for HDMI or DP playback - -.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c - :internal: - Memory Management and Command Submission ========================================
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v5 1/5] drm/i915: setup bridge for HDMI LPE audio driver
Quoted 97 lines · Jani Nikula
Quoted 85 lines · Takashi Iwai
Quoted 42 lines · Daniel Vetter
Quoted 40 lines · Jani Nikula
Quoted 8 lines · Jerome Anand
Enable support for HDMI LPE audio mode on Baytrail and Cherrytrail when HDaudio controller is not detected
Setup minimum required resources during
i915_driver_load:
1. Create a platform device to share MMIO/IRQ resources
2. Make the platform device child of i915 device for runtime PM.
3. Create IRQ chip to forward HDMI LPE audio irqs.Quoted 5 lines
HDMI LPE audio driver (a standalone sound driver) probes the LPE audio device and creates a new sound card.
Signed-off-by Pierre-Louis Bossart <[email protected]>Signed-off-by Jerome Anand <[email protected]>Acked-by Jani Nikula <[email protected]>Quoted 23 lines
--- Documentation/gpu/i915.rst | 9 + drivers/gpu/drm/i915/Makefile | 3 + drivers/gpu/drm/i915/i915_drv.c | 4 +- drivers/gpu/drm/i915/i915_drv.h | 11 ++ drivers/gpu/drm/i915/i915_irq.c | 16 ++ drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_audio.c | 25 +++ drivers/gpu/drm/i915/intel_drv.h | 2 + drivers/gpu/drm/i915/intel_lpe_audio.c | 321 +++++++++++++++++++++++++++++++++ include/drm/intel_lpe_audio.h | 46 +++++ 10 files changed, 438 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_lpe_audio.c create mode 100644 include/drm/intel_lpe_audio.hDocumentation/gpu/i915.rst +0
-0@@ -225,6 +225,15 @@ Display PLLs .. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.h :internal:Quoted 14 lines
Quoted 9 lines
Documentation/gpu/i915.rst High Definition Audio · line 155
Quoted 9 lines
Documentation/gpu/i915.rst +9
-0+intel hdmi lpe audio support +---------------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :doc: LPE Audio integration for HDMI or DP playback + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :internal: +Please apply a follow-up patch to move this next to the chapter about hda audio, because that makes imo more sense than just semi-randomly adding it at the end of the chapter. And it would avoid a silly conflict with stuff in drm-intel.git, which indeed should be here.
OK, how about the one below?
thanks,
Takashi
-- 8< --
From: Takashi Iwai <[email protected]>
Subject: [PATCH]Documentation/gpu: Move LPE audio section after HD-audioAs Daniel suggested, it makes more sense and reduces the conflicts.
Also, while we're at it, tidy up the section title from all lower letters.
Signed-off-by Takashi Iwai <[email protected]>--- Documentation/gpu/i915.rst | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)Documentation/gpu/i915.rst +0
-0Documentation/gpu/i915.rst High Definition Audio · line 151
Quoted 8 lines
Documentation/gpu/i915.rst +5
-0@@ -144,6 +144,15 @@ High Definition Audio .. kernel-doc:: include/drm/i915_component.h :internal: +Intel HDMI LPE Audio Support +---------------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :doc: LPE Audio integration for HDMI or DP playback^^
Quoted 2 lines
While at it, please fix the double space (it was in the original already).
OK, fixed.
thanks,
Takashi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v5 2/5 drm/i915: Add support for audio driver notifications
In reply to Jerome AnandNotifiations like mode change, hot plug and edid to the audio driver are added. This is inturn used by the audio driver for its functionality.
A new interface file capturing the notifications needed by the audio driver is added
--- drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/intel_audio.c | 6 +++++ drivers/gpu/drm/i915/intel_hdmi.c | 1 + drivers/gpu/drm/i915/intel_lpe_audio.c | 49 ++++++++++++++++++++++++++++++++++ 4 files changed, 58 insertions(+)
drivers/gpu/drm/i915/i915_drv.h +2 -0
@@ -3602,6 +3602,8 @@ void i915_teardown_sysfs(struct drm_i915_private *dev_priv);int intel_lpe_audio_init (struct drm_i915_private *dev_priv);void intel_lpe_audio_teardown (struct drm_i915_private *dev_priv);void intel_lpe_audio_irq_handler (struct drm_i915_private *dev_priv); +void intel_lpe_audio_notify (struct drm_i915_private *dev_priv, +void *eld,int port,int tmds_clk_speed);/* intel_i2c.c */ extern int intel_setup_gmbus (struct drm_i915_private *dev_priv);
drivers/gpu/drm/i915/intel_audio.c +6 -0
@@ -24,6 +24,7 @@#include <linux/kernel.h> #include <linux/component.h> #include <drm/i915_component.h> +#include <drm/intel_lpe_audio.h> #include "intel_drv.h" #include <drm/drmP.h>
@@ -630,6 +631,9 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder,if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) acomp->audio_ops->pin_eld_notify (acomp->audio_ops->audio_ptr, (int ) port, (int ) pipe); + +intel_lpe_audio_notify (dev_priv, connector->eld, port, + crtc_state->port_clock); }/**
@@ -663,6 +667,8 @@ void intel_audio_codec_disable(struct intel_encoder *intel_encoder)if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) acomp->audio_ops->pin_eld_notify (acomp->audio_ops->audio_ptr, (int ) port, (int ) pipe); + +intel_lpe_audio_notify (dev_priv,NULL , port,0 ); }/**
drivers/gpu/drm/i915/intel_hdmi.c +1 -0
@@ -36,6 +36,7 @@#include <drm/drm_edid.h> #include "intel_drv.h" #include <drm/i915_drm.h> +#include <drm/intel_lpe_audio.h> #include "i915_drv.h" static struct drm_device *intel_hdmi_to_dev (struct intel_hdmi *intel_hdmi)
drivers/gpu/drm/i915/intel_lpe_audio.c +49 -0
52 lines not on this page · raw message
Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v5 2/5] drm/i915: Add support for audio driver notifications
Quoted 9 lines · Jerome Anand
Notifiations like mode change, hot plug and edid to the audio driver are added. This is inturn used by the audio driver for its functionality.
A new interface file capturing the notifications needed by the audio driver is added
Signed-off-by Pierre-Louis Bossart <[email protected]>Signed-off-by Jerome Anand <[email protected]>
Quoted 120 lines
--- drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/intel_audio.c | 6 +++++ drivers/gpu/drm/i915/intel_hdmi.c | 1 + drivers/gpu/drm/i915/intel_lpe_audio.c | 49 ++++++++++++++++++++++++++++++++++ 4 files changed, 58 insertions(+)drivers/gpu/drm/i915/i915_drv.h +2
-0@@ -3602,6 +3602,8 @@ void i915_teardown_sysfs(struct drm_i915_private *dev_priv);int intel_lpe_audio_init (struct drm_i915_private *dev_priv);void intel_lpe_audio_teardown (struct drm_i915_private *dev_priv);void intel_lpe_audio_irq_handler (struct drm_i915_private *dev_priv); +void intel_lpe_audio_notify (struct drm_i915_private *dev_priv, +void *eld,int port,int tmds_clk_speed);/* intel_i2c.c */ extern int intel_setup_gmbus (struct drm_i915_private *dev_priv);drivers/gpu/drm/i915/intel_audio.c +6
-0@@ -24,6 +24,7 @@#include <linux/kernel.h> #include <linux/component.h> #include <drm/i915_component.h> +#include <drm/intel_lpe_audio.h> #include "intel_drv.h" #include <drm/drmP.h> @@ -630,6 +631,9 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder,if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) acomp->audio_ops->pin_eld_notify (acomp->audio_ops->audio_ptr, (int ) port, (int ) pipe); + +intel_lpe_audio_notify (dev_priv, connector->eld, port, + crtc_state->port_clock); }/** @@ -663,6 +667,8 @@ void intel_audio_codec_disable(struct intel_encoder *intel_encoder)if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) acomp->audio_ops->pin_eld_notify (acomp->audio_ops->audio_ptr, (int ) port, (int ) pipe); + +intel_lpe_audio_notify (dev_priv,NULL , port,0 ); }/** drivers/gpu/drm/i915/intel_hdmi.c +1
-0@@ -36,6 +36,7 @@#include <drm/drm_edid.h> #include "intel_drv.h" #include <drm/i915_drm.h> +#include <drm/intel_lpe_audio.h> #include "i915_drv.h" static struct drm_device *intel_hdmi_to_dev (struct intel_hdmi *intel_hdmi)drivers/gpu/drm/i915/intel_lpe_audio.c +49
-0@@ -319,3 +319,52 @@ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv)irq_free_desc (dev_priv->lpe_audio.irq); } + + +/** +* intel_lpe_audio_notify() - notify lpe audio event +* audio driver and i915 +* @dev_priv: the i915 drm device private data +* @eld : ELD data +* @port: port id +* @tmds_clk_speed: tmds clock frequency in Hz +* +* Notify lpe audio driver of eld change. +*/ +void intel_lpe_audio_notify (struct drm_i915_private *dev_priv, +void *eld,int port,int tmds_clk_speed) +{ +unsigned long irq_flags; +struct intel_hdmi_lpe_audio_pdata *pdata =NULL ; + +if (!HAS_LPE_AUDIO (dev_priv)) +return ; + + pdata =dev_get_platdata ( + &(dev_priv->lpe_audio.platdev->dev)); + +spin_lock_irqsave (&pdata->lpe_audio_slock, irq_flags); + +if (eld !=NULL ) { +memcpy (pdata->eld.eld_data, eld, +HDMI_MAX_ELD_BYTES ); + pdata->eld.port_id = port; + pdata->hdmi_connected = true; + +if (tmds_clk_speed) + pdata->tmds_clock_speed = tmds_clk_speed; + }else { +memset (pdata->eld.eld_data,0 , +HDMI_MAX_ELD_BYTES ); + pdata->hdmi_connected = false; + } + +if (pdata->notify_audio_lpe) + pdata->notify_audio_lpe ( + (eld !=NULL ) ? &pdata->eld :NULL ); +else + pdata->notify_pending = true; + +spin_unlock_irqrestore (&pdata->lpe_audio_slock, + irq_flags); +}
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v5 3/5 ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T
In reply to Jerome AnandOn Baytrail and Cherrytrail, HDaudio may be fused out or disabled by the BIOS. This driver enables an alternate path to the i915 display registers and DMA.
Although there is no hardware path between i915 display and LPE/SST audio clusters, this HDMI capability is referred to in the documentation as "HDMI LPE Audio" so we keep the name for consistency. There is no hardware path or control dependencies with the LPE/SST DSP functionality.
The hdmi-lpe-audio driver will be probed when the i915 driver creates a child platform device.
Since this driver is neither SoC nor PCI, a new x86 folder is added Additional indirections in the code will be cleaned up in the next series to aid smoother DP integration
--- sound/Kconfig | 2 + sound/Makefile | 2 +- sound/x86/Kconfig | 15 + sound/x86/Makefile | 4 + sound/x86/intel_hdmi_lpe_audio.c | 614 +++++++++++++++++++++++++++++++++++ sound/x86/intel_hdmi_lpe_audio.h | 683 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 1319 insertions(+), 1 deletion(-) create mode 100644 sound/x86/Kconfig create mode 100644 sound/x86/Makefile create mode 100644 sound/x86/intel_hdmi_lpe_audio.c create mode 100644 sound/x86/intel_hdmi_lpe_audio.h
sound/Kconfig +2 -0
@@ -108,6 +108,8 @@ source "sound/parisc/Kconfig" source "sound/soc/Kconfig" +source "sound/x86/Kconfig" + endif # SND menuconfig SOUND_PRIME
sound/Makefile +1 -1
@@ -5,7 +5,7 @@ obj-$(CONFIG_SOUND) += soundcore.o obj-$(CONFIG_SOUND_PRIME) += oss/ obj-$(CONFIG_DMASOUND) += oss/ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \ - firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ + firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ x86/ obj-$(CONFIG_SND_AOA) += aoa/ # This one must be compilable even if sound is configured out
sound/x86/Kconfig new file +15 -0
@@ -0,0 +1,15 @@ +menuconfig SND_X86 + tristate "X86 sound devices" + depends on X86 + ---help--- + X86 sound devices that don't fall under SoC or PCI categories + +if SND_X86 + +config HDMI_LPE_AUDIO + tristate "HDMI audio without HDaudio on Intel Atom platforms" + depends on DRM_I915 + help + Choose this option to support HDMI LPE Audio mode + +endif # SND_X86
sound/x86/Makefile new file +4 -0
@@ -0,0 +1,4 @@ +snd-hdmi-lpe-audio-objs += \ + intel_hdmi_lpe_audio.o + +obj-$(CONFIG_HDMI_LPE_AUDIO) += snd-hdmi-lpe-audio.o
sound/x86/intel_hdmi_lpe_audio.c new file +614 -0
614 lines not on this page · raw message
sound/x86/intel_hdmi_lpe_audio.h new file +683 -0
683 lines not on this page · raw message
Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
kbuild test robot
build bot[PATCH] ALSA: fix resource_size.cocci warnings
sound/x86/intel_hdmi_lpe_audio.c:498:24-27: ERROR: Missing resource_size with res_mmio
sound/x86/intel_hdmi_lpe_audio.c:498:24-27: ERROR: Missing resource_size with res_mmio
Use resource_size function on resource object
instead of explicit computation.
Generated by: scripts/coccinelle/api/resource_size.cocci
---
intel_hdmi_lpe_audio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
sound/x86/intel_hdmi_lpe_audio.c +1 -2
@@ -495,8 +495,7 @@ static int hdmi_lpe_audio_probe(struct p (unsigned int)res_mmio->end); mmio_start =ioremap_nocache (res_mmio->start, - (size_t )((res_mmio->end - res_mmio->start) - +1 )); + (size_t )(resource_size (res_mmio)));if (!mmio_start) {dev_err (&hlpe_pdev->dev,"Could not get ioremap\n" );return -EACCES ;
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
kbuild test robot
build botRe: [PATCH v5 3/5] ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T
In reply to Jerome Anandurl: https://github.com/0day-ci/linux/commits/Jerome-Anand/Add-support-for-Legacy-HDMI-audio-drivers/20170124-213547 base:
Hi Jerome,
[auto build test WARNING on ]
coccinelle warnings: (new ones prefixed by >>)
>> sound/x86/intel_hdmi_lpe_audio.c:498:24-27: ERROR: Missing resource_size with res_mmio
Please review and possibly fold the followup patch.
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v5 4/5 ALSA: x86: hdmi: Add audio support for BYT and CHT
In reply to Jerome AnandHdmi audio driver based on the child platform device created by gfx driver is implemented.
This audio driver is derived from legacy intel hdmi audio driver.
The interfaces for interaction between gfx and audio are updated and the driver implementation updated to derive interrupts in its own address space based on irq chip framework
The changes to calculate sub-period positions was triggered by David Henningsson <[email protected]> and is accomodated in this patch
--- sound/x86/Makefile | 2 + sound/x86/intel_hdmi_audio.c | 1855 ++++++++++++++++++++++++++++++++++++++ sound/x86/intel_hdmi_audio.h | 197 ++++ sound/x86/intel_hdmi_audio_if.c | 551 +++++++++++ sound/x86/intel_hdmi_lpe_audio.c | 15 +- 5 files changed, 2614 insertions(+), 6 deletions(-) create mode 100644 sound/x86/intel_hdmi_audio.c create mode 100644 sound/x86/intel_hdmi_audio.h create mode 100644 sound/x86/intel_hdmi_audio_if.c
sound/x86/Makefile +2 -0
@@ -1,4 +1,6 @@ snd-hdmi-lpe-audio-objs += \ + intel_hdmi_audio.o \ + intel_hdmi_audio_if.o \ intel_hdmi_lpe_audio.o obj-$(CONFIG_HDMI_LPE_AUDIO) += snd-hdmi-lpe-audio.o
sound/x86/intel_hdmi_audio.c new file +1855 -0
1,855 lines not on this page · raw message
sound/x86/intel_hdmi_audio.h new file +197 -0
197 lines not on this page · raw message
sound/x86/intel_hdmi_audio_if.c new file +551 -0
551 lines not on this page · raw message
sound/x86/intel_hdmi_lpe_audio.c +9 -6
@@ -34,6 +34,7 @@#include <sound/initval.h> #include <drm/intel_lpe_audio.h> #include "intel_hdmi_lpe_audio.h" +#include "intel_hdmi_audio.h" /* globals*/ static struct platform_device *hlpe_pdev;
@@ -450,9 +451,9 @@ static void notify_audio_lpe(void *audio_ptr)/** * hdmi_lpe_audio_probe - start bridge with i915 * -* This function is called when the i915 driver creates the hdmi-lpe-audio -* platform device. Card creation is deferred until a hot plug event is -* received +* This function is called when the i915 driver creates the +* hdmi-lpe-audio platform device. Card creation is deferred until a +* hot plug event is received */ static int hdmi_lpe_audio_probe (struct platform_device *pdev) {
@@ -495,8 +496,8 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) (unsigned int)res_mmio->end); mmio_start =ioremap_nocache (res_mmio->start, - (size_t )((res_mmio->end - res_mmio->start) - +1 )); + (size_t )((res_mmio->end - + res_mmio->start) +1 ));if (!mmio_start) {dev_err (&hlpe_pdev->dev,"Could not get ioremap\n" );return -EACCES ;
@@ -548,11 +549,11 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev)platform_set_drvdata (pdev, ctx); + ret =hdmi_audio_probe ((void *)pdev);dev_dbg (&hlpe_pdev->dev,"hdmi lpe audio: setting pin eld notify callback\n" );spin_lock_irqsave (&pdata->lpe_audio_slock, flag_irq); pdata->notify_audio_lpe = notify_audio_lpe; -if (pdata->notify_pending) {dev_dbg (&hlpe_pdev->dev,"%s: handle pending notification\n" , __func__);
@@ -576,6 +577,8 @@ static int hdmi_lpe_audio_remove(struct platform_device *pdev)dev_dbg (&hlpe_pdev->dev,"Enter %s\n" , __func__); +hdmi_audio_remove (pdev); +/* get context, release resources */ ctx =platform_get_drvdata (pdev);iounmap (ctx->mmio_start);
Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v5 5/5 ALSA: x86: hdmi: continue playback even when display resolution changes
In reply to Jerome AnandWhen the display resolution changes, the drm disables the display pipes due to which audio rendering stops. At this time, we need to ensure the existing audio pointers and buffers are cleared out so that the playback can restarted once the display pipe is enabled with a different N/CTS values
--- sound/x86/intel_hdmi_audio.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)
sound/x86/intel_hdmi_audio.c +18 -3
@@ -43,6 +43,7 @@ static DEFINE_MUTEX(had_mutex);static int hdmi_card_index =SNDRV_DEFAULT_IDX1 ;static char *hdmi_card_id =SNDRV_DEFAULT_STR1 ;static struct snd_intelhad *had_data; +static int underrun_count;module_param_named (index, hdmi_card_index, int,0444 ); MODULE_PARM_DESC(index,
@@ -1052,6 +1053,7 @@ static int snd_intelhad_open(struct snd_pcm_substream *substream) intelhaddata =snd_pcm_substream_chip (substream); had_stream = intelhaddata->private_data; runtime = substream->runtime; + underrun_count =0 ;pm_runtime_get (intelhaddata->dev);
@@ -1445,10 +1447,23 @@ static snd_pcm_uframes_t snd_intelhad_pcm_pointer( buf_id = intelhaddata->curr_buf %4 ;had_read_register (AUD_BUF_A_LENGTH + (buf_id *HAD_REG_WIDTH ), &t); -if (t ==0 ) { -pr_debug ("discovered buffer done for buf %d\n" , buf_id); -/* had_process_buffer_done(intelhaddata); */ + +if ((t ==0 ) || (t == ((u32)-1L ))) { + underrun_count++; +pr_debug ("discovered buffer done for buf %d, count = %d\n" , + buf_id, underrun_count); + +if (underrun_count > (HAD_MIN_PERIODS /2 )) { +pr_debug ("assume audio_codec_reset, underrun = %d - do xrun\n" , + underrun_count); + underrun_count =0 ; +return SNDRV_PCM_POS_XRUN ; + } + }else { +/* Reset Counter */ + underrun_count =0 ; } + t = intelhaddata->buf_info[buf_id].buf_size - t;if (intelhaddata->stream_info.buffer_rendered)
Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for Add support for Legacy HDMI audio drivers (rev6)
In reply to Jerome Anand== Series Details ==
== Series Details ==
Series: Add support for Legacy HDMI audio drivers (rev6)
URL : https://patchwork.freedesktop.org/series/16254/
State : failure
== Summary ==
Series 16254v6 Add support for Legacy HDMI audio drivers
https://patchwork.freedesktop.org/api/1.0/series/16254/revisions/6/mbox/
Test gem_busy:
Subgroup basic-hang-default:
pass -> FAIL (fi-hsw-4770r)fi-bdw-5557u total:246 pass:232 dwarn:0 dfail:0 fail:0 skip:14 fi-bsw-n3050 total:246 pass:207 dwarn:0 dfail:0 fail:0 skip:39 fi-bxt-j4205 total:246 pass:224 dwarn:0 dfail:0 fail:0 skip:22 fi-bxt-t5700 total:79 pass:66 dwarn:0 dfail:0 fail:0 skip:12 fi-byt-j1900 total:246 pass:219 dwarn:0 dfail:0 fail:0 skip:27 fi-byt-n2820 total:246 pass:215 dwarn:0 dfail:0 fail:0 skip:31 fi-hsw-4770 total:246 pass:227 dwarn:0 dfail:0 fail:0 skip:19 fi-hsw-4770r total:246 pass:226 dwarn:0 dfail:0 fail:1 skip:19 fi-ivb-3520m total:246 pass:225 dwarn:0 dfail:0 fail:0 skip:21 fi-ivb-3770 total:246 pass:225 dwarn:0 dfail:0 fail:0 skip:21 fi-kbl-7500u total:246 pass:225 dwarn:0 dfail:0 fail:0 skip:21 fi-skl-6260u total:246 pass:233 dwarn:0 dfail:0 fail:0 skip:13 fi-skl-6700hq total:246 pass:226 dwarn:0 dfail:0 fail:0 skip:20 fi-skl-6700k total:246 pass:222 dwarn:3 dfail:0 fail:0 skip:21 fi-skl-6770hq total:246 pass:233 dwarn:0 dfail:0 fail:0 skip:13 fi-snb-2520m total:246 pass:215 dwarn:0 dfail:0 fail:0 skip:31 fi-snb-2600 total:246 pass:214 dwarn:0 dfail:0 fail:0 skip:32
64fc20ef2f4bf8a6b563a812485fc6ac86637fcd drm-tip: 2017y-01m-24d-10h-02m-05s UTC integration manifest bc83e63 ALSA: x86: hdmi: continue playback even when display resolution changes e71ca26 ALSA: x86: hdmi: Add audio support for BYT and CHT
c0b72d6 ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T
b6ecde6 drm/i915: Add support for audio driver notifications
d7b32cd drm/i915: setup bridge for HDMI LPE audio driver
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_3588/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 9 lines · Jerome Anand
Legacy (CherryTrail/ Baytrail) HDMI audio drivers added Legacy hdmi audio-Gfx interaction/ interfacing is updated to use irq chip framework
This patch series has only been tested on hardware with
a single HDMI connector/pipe and additional work may be needed for newer machines with 2 connectors
Quoted 7 lines
Jerome Anand (5):
drm/i915: setup bridge for HDMI LPE audio driver drm/i915: Add support for audio driver notifications
ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T
ALSA: x86: hdmi: Add audio support for BYT and CHT
ALSA: x86: hdmi: continue playback even when display resolution
changes
OK, now I merged the patch to topic/intel-lpe-audio branch of my sound git tree. It's based on 4.10-rc5.
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git topic/intel-lpe-audio
Jani, could you check whether the branch can be merged cleanly to i915 tree (just to be sure)? I'm going to merge this topic branch to for-next branch, maybe tomorrow or on Friday, once after finishing the local build tests.
thanks,
Takashi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerQuoted 22 lines · Takashi Iwai
Quoted 9 lines · Jerome Anand
Legacy (CherryTrail/ Baytrail) HDMI audio drivers added Legacy hdmi audio-Gfx interaction/ interfacing is updated to use irq chip framework
This patch series has only been tested on hardware with
a single HDMI connector/pipe and additional work may be needed for newer machines with 2 connectorsQuoted 7 lines
Jerome Anand (5):
drm/i915: setup bridge for HDMI LPE audio driver drm/i915: Add support for audio driver notifications
ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T
ALSA: x86: hdmi: Add audio support for BYT and CHT
ALSA: x86: hdmi: continue playback even when display resolution
changesOK, now I merged the patch to topic/intel-lpe-audio branch of my sound git tree. It's based on 4.10-rc5.
Quoted 6 lines
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.gittopic/intel-lpe-audioJani, could you check whether the branch can be merged cleanly to i915 tree (just to be sure)? I'm going to merge this topic branch to for-next branch, maybe tomorrow or on Friday, once after finishing the local build tests.
There's a trivial merge conflict in Documentation/gpu/i915.rst, I don't think that's something to worry about.
BR,
Jani.
Quoted 5 lines
thanks,
Takashi
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 26 lines · Jani Nikula
Quoted 24 lines · Takashi Iwai
Quoted 9 lines · Jerome Anand
Legacy (CherryTrail/ Baytrail) HDMI audio drivers added Legacy hdmi audio-Gfx interaction/ interfacing is updated to use irq chip framework
This patch series has only been tested on hardware with
a single HDMI connector/pipe and additional work may be needed for newer machines with 2 connectorsQuoted 7 lines
Jerome Anand (5):
drm/i915: setup bridge for HDMI LPE audio driver drm/i915: Add support for audio driver notifications
ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T
ALSA: x86: hdmi: Add audio support for BYT and CHT
ALSA: x86: hdmi: continue playback even when display resolution
changesOK, now I merged the patch to topic/intel-lpe-audio branch of my sound git tree. It's based on 4.10-rc5.
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.gittopic/intel-lpe-audio
Quoted 7 lines
Quoted 4 lines
Jani, could you check whether the branch can be merged cleanly to i915 tree (just to be sure)? I'm going to merge this topic branch to for-next branch, maybe tomorrow or on Friday, once after finishing the local build tests.
There's a trivial merge conflict in
Documentation/gpu/i915.rst, I don't think that's something to worry about.
OK, thanks for a quick check!
Takashi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 4 lines · Jerome Anand
This patch series has only been tested on hardware with
a single HDMI connector/pipe and additional work may be needed for newer machines with 2 connectors
BTW, I have such a machine, CHV with two DP outputs.
If you have a test patch (not necessarily in a mergeable form), I'll be glad to test. This will make me easier to work on further cleanups.
thanks,
Takashi
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 11 lines · Takashi Iwai
Quoted 4 lines · Jerome Anand
This patch series has only been tested on hardware with
a single HDMI connector/pipe and additional work may be needed for newer machines with 2 connectorsBTW, I have such a machine, CHV with two DP outputs.
If you have a test patch (not necessarily in a mergeable form), I'll be glad to test. This will make me easier to work on further cleanups.
I also have a CHT machine with 1 DP and 1 HDMI connector. I'll start working on DP once I manage to find some time.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx