wlcore: print the sdio buffer after reading it
PATCH 1/1 wlcore: print the sdio buffer after reading it
fix an issue where we printed the sdio buffer before actually read it.
Signed-off-by Guy Mishol <[email protected]>
--- drivers/net/wireless/ti/wlcore/sdio.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/net/wireless/ti/wlcore/sdio.c +7 -7
@@ -81,13 +81,6 @@ static int __must_check wl12xx_sdio_raw_read(struct device *child, int addr,sdio_claim_host (func); -if (unlikely (dump)) { -printk (KERN_DEBUG "wlcore_sdio: READ from 0x%04x\n" , addr); -print_hex_dump (KERN_DEBUG ,"wlcore_sdio: READ " , -DUMP_PREFIX_OFFSET ,16 ,1 , - buf, len, false); - } -if (unlikely (addr ==HW_ACCESS_ELP_CTRL_REG )) { ((u8 *)buf)[0 ] =sdio_f0_readb (func, addr, &ret); dev_dbg(child->parent, "sdio read 52 addr 0x%x, byte 0x%02x\n",
@@ -107,6 +100,13 @@ static int __must_check wl12xx_sdio_raw_read(struct device *child, int addr,if (WARN_ON (ret))dev_err (child->parent,"sdio read failed (%d)\n" , ret); +if (unlikely (dump)) { +printk (KERN_DEBUG "wlcore_sdio: READ from 0x%04x\n" , addr); +print_hex_dump (KERN_DEBUG ,"wlcore_sdio: READ " , +DUMP_PREFIX_OFFSET ,16 ,1 , + buf, len, false); + } +return ret; }
Signature · 1 line
2.6.4
Quoted 4 lines · Guy Mishol
fix an issue where we printed the sdio buffer before actually read it.
Signed-off-by Guy Mishol <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
64ad08605e84 wlcore: print the sdio buffer after reading it
Signature · 6 lines
https://patchwork.kernel.org/patch/9539423/ Documentation about submitting wireless patches and checking status from patchwork: https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches