ARM: dts: orion5x-lschl: Fix model name
PATCH 1/2 ARM: dts: orion5x-lschl: Fix model name
Model name should be consistent with legacy device file, so that user can migrate their system from legacy device support to device-tree safely.
Legacy device file is currently removed, but it can be found on 4.8 or previous version of linux:
arch/arm/mach-orion5x/ls-chl-setup.c
--- arch/arm/boot/dts/orion5x-lschl.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/orion5x-lschl.dts +2 -2
@@ -2,7 +2,7 @@ * Device Tree file for Buffalo Linkstation LS-CHLv3 * * Copyright (C) 2016 Ash Hughes <[email protected]> - * Copyright (C) 2015, 2016 + * Copyright (C) 2015-2017 * Roger Shimizu <[email protected]> * * This file is dual-licensed: you can use it either under the terms
@@ -52,7 +52,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Buffalo Linkstation Live v3 (LS-CHL)"; + model = "Buffalo Linkstation LiveV3 (LS-CHL)"; compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { /* 128 MB */
Signature · 1 line
2.11.0
PATCH 2/2 ARM: dts: orion5x-lschl: More consistent naming on linkstation series
DTS files, which includes orion5x-linkstation.dtsi, are named:
orion5x-linkstation-*.dts
So we rename the file below:
arch/arm/boot/dts/orion5x-lschl.dts
to the new name:
arch/arm/boot/dts/orion5x-linkstation-lschl.dts
Because DTS conversion of this device was just introduced in 4.9, Debian is still using legacy device support, other distros are the same, so here we won't expect any impact actually.
---
arch/arm/boot/dts/{orion5x-lschl.dts => orion5x-linkstation-lschl.dts} | 0
1 file changed, 0 insertions(+), 0 deletions(-)
rename arch/arm/boot/dts/{orion5x-lschl.dts => orion5x-linkstation-lschl.dts} (100%)arch/arm/boot/dts/orion5x-linkstation-lschl.dts renamed from arch/arm/boot/dts/orion5x-lschl.dts +0 -0
Signature · 1 line
2.11.0
PATCH 2/2 ARM: dts: orion5x-lschl: More consistent naming on linkstation series
Hi Roger,
Quoted 8 lines · Roger Shimizu
DTS files, which includes
orion5x-linkstation.dtsi, are named:
orion5x-linkstation-*.dtsSo we rename the file below:
arch/arm/boot/dts/orion5x-lschl.dts
to the new name:
arch/arm/boot/dts/orion5x-linkstation-lschl.dts
Quoted 7 lines
Because DTS conversion of this device was just introduced in 4.9, Debian is still using legacy device support, other distros are the same, so here we won't expect any impact actually.
Fixes f94f268979a2 ("ARM: dts: orion5x: convert ls-chl to FDT")Cc Ashley Hughes <[email protected]>Signed-off-by Roger Shimizu <[email protected]>
Applied on mvebu/dt
Thanks,
Gregory
Quoted 12 lines
--- arch/arm/boot/dts/{orion5x-lschl.dts => orion5x-linkstation-lschl.dts} | 0 1 file changed, 0 insertions(+), 0 deletions(-) rename arch/arm/boot/dts/{orion5x-lschl.dts => orion5x-linkstation-lschl.dts} (100%)arch/arm/boot/dts/orion5x-linkstation-lschl.dts renamed from arch/arm/boot/dts/orion5x-lschl.dts +0
-0Signature · 1 line
2.11.0
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/2 ARM: dts: orion5x-lschl: Fix model name
In reply to Roger ShimizuHi Roger,
Quoted 11 lines · Roger Shimizu
Model name should be consistent with legacy device file, so that user can migrate their system from legacy device support to device-tree safely.
Legacy device file is currently removed, but it can be found on 4.8 or previous version of linux:
arch/arm/mach-orion5x/ls-chl-setup.cFixes f94f268979a2 ("ARM: dts: orion5x: convert ls-chl to FDT")Cc Ashley Hughes <[email protected]>Signed-off-by Roger Shimizu <[email protected]>
Applied on mvebu/dt
Thanks,
Gregory
Quoted 29 lines
--- arch/arm/boot/dts/orion5x-lschl.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm/boot/dts/orion5x-lschl.dts +2
-2@@ -2,7 +2,7 @@ * Device Tree file for Buffalo Linkstation LS-CHLv3 * * Copyright (C) 2016 Ash Hughes <[email protected]> - * Copyright (C) 2015, 2016 + * Copyright (C) 2015-2017 * Roger Shimizu <[email protected]> * * This file is dual-licensed: you can use it either under the terms@@ -52,7 +52,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Buffalo Linkstation Live v3 (LS-CHL)"; + model = "Buffalo Linkstation LiveV3 (LS-CHL)"; compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { /* 128 MB */Signature · 1 line
2.11.0
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com