fuzz: update x86emul fuzzer
v2 cover fuzz: update x86emul fuzzer
The first few patches refactor x86emul code so that more code can be shared between xen and userspace tools.
I have run XTF suite (tests subject to availability on the testbox I use, and xsa-195 was skipped because qemu segfault -- a known issue) against this series, no issue is found.
Wei.
---
Cc: Ian Jackson <[email protected]>
Cc: Jan Beulich <[email protected]>
Cc: Andrew Cooper <[email protected]>
Cc: George Dunlap <[email protected]>
Wei Liu (12):
fuzz: don't buffer stdout in afl stubs
x86: extract macros to x86-defns.h
x86: extract vendor numeric id to x86-vendors.h
x86emul/test: use x86-vendors.h
x86emul: use eflags definitions in x86-defns.h
x86emul: use msr definitions in msr-index.h
x86: add UMIP CR4 bit
x86emul: use CR definitions in x86-defns.h
x86emul: use TRAP definitions in x86-defns.h
fuzz/x86emul: update fuzzer
fuzz/x86emul: print out minimal input size
fuzz: update README.afl example
tools/fuzz/README.afl | 5 +- tools/fuzz/libelf/afl-libelf-fuzzer.c | 2 + .../afl-x86-insn-emulator-fuzzer.c | 10 + .../x86-insn-emulator-fuzzer.c | 665 ++++++++++++++++++-- tools/tests/x86_emulator/test_x86_emulator.c | 9 - tools/tests/x86_emulator/x86_emulate.c | 3 - tools/tests/x86_emulator/x86_emulate.h | 9 +- xen/arch/x86/x86_emulate/x86_emulate.c | 700 ++++++++++----------- xen/include/asm-x86/processor.h | 105 +--- xen/include/asm-x86/x86-defns.h | 101 +++ 10 files changed, 1045 insertions(+), 564 deletions(-) create mode 100644 xen/include/asm-x86/x86-defns.h
Signature · 7 lines
2.11.0 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xen.org/xen-devel
PATCH v2 1/12 fuzz: don't buffer stdout in afl stubs
... to avoid obscuring output.
---
Cc: Ian Jackson <[email protected]>
Cc: Jan Beulich <[email protected]>
Cc: Andrew Cooper <[email protected]>
Cc: George Dunlap <[email protected]>
--- tools/fuzz/libelf/afl-libelf-fuzzer.c | 2 ++ tools/fuzz/x86_instruction_emulator/afl-x86-insn-emulator-fuzzer.c | 2 ++ 2 files changed, 4 insertions(+)
tools/fuzz/libelf/afl-libelf-fuzzer.c +2 -0
@@ -13,6 +13,8 @@ int main(int argc, char **argv)size_t size;FILE *fp; +setbuf (stdout,NULL ); +if ( argc !=2 ) {printf ("Expecting only one argument\n" );
tools/fuzz/x86_instruction_emulator/afl-x86-insn-emulator-fuzzer.c +2 -0
@@ -13,6 +13,8 @@ int main(int argc, char **argv)size_t size;FILE *fp; +setbuf (stdout,NULL ); +if ( argc !=2 ) {printf ("Expecting only one argument\n" );
Signature · 7 lines
2.11.0 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xen.org/xen-devel
Re: [PATCH v2 01/12] fuzz: don't buffer stdout in afl stubs
Quoted 4 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:07, <[email protected]> wrote:
... to avoid obscuring output.
Signed-off-by Wei Liu <[email protected]>
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
PATCH v2 2/12 x86: extract macros to x86-defns.h
In reply to Wei Liu... so that they can be used by userspace x86 instruction emulator test program and fuzzer as well.
No functional change.
---
Cc: Jan Beulich <[email protected]>
Cc: Andrew Cooper <[email protected]>
--- xen/include/asm-x86/processor.h | 97 +------------------------------------- xen/include/asm-x86/x86-defns.h | 100 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 102 insertions(+), 95 deletions(-) create mode 100644 xen/include/asm-x86/x86-defns.h
xen/include/asm-x86/processor.h +2 -95
@@ -16,6 +16,8 @@#include <asm/desc.h> #endif +#include "x86-defns.h" +/* * CPU vendor IDs */
@@ -25,101 +27,6 @@#define X86_VENDOR_NUM 3#define X86_VENDOR_UNKNOWN 0xff -/* -* EFLAGS bits -*/ -#define X86_EFLAGS_CF 0x00000001/* Carry Flag */ -#define X86_EFLAGS_MBS 0x00000002/* Resvd bit */ -#define X86_EFLAGS_PF 0x00000004/* Parity Flag */ -#define X86_EFLAGS_AF 0x00000010/* Auxillary carry Flag */ -#define X86_EFLAGS_ZF 0x00000040/* Zero Flag */ -#define X86_EFLAGS_SF 0x00000080/* Sign Flag */ -#define X86_EFLAGS_TF 0x00000100/* Trap Flag */ -#define X86_EFLAGS_IF 0x00000200/* Interrupt Flag */ -#define X86_EFLAGS_DF 0x00000400/* Direction Flag */ -#define X86_EFLAGS_OF 0x00000800/* Overflow Flag */ -#define X86_EFLAGS_IOPL 0x00003000/* IOPL mask */ -#define X86_EFLAGS_NT 0x00004000/* Nested Task */ -#define X86_EFLAGS_RF 0x00010000/* Resume Flag */ -#define X86_EFLAGS_VM 0x00020000/* Virtual Mode */ -#define X86_EFLAGS_AC 0x00040000/* Alignment Check */ -#define X86_EFLAGS_VIF 0x00080000/* Virtual Interrupt Flag */ -#define X86_EFLAGS_VIP 0x00100000/* Virtual Interrupt Pending */ -#define X86_EFLAGS_ID 0x00200000/* CPUID detection flag */ - -#define X86_EFLAGS_ARITH_MASK \ - (X86_EFLAGS_CF | X86_EFLAGS_PF | X86_EFLAGS_AF | \ - X86_EFLAGS_ZF | X86_EFLAGS_SF | X86_EFLAGS_OF) - -/* -* Intel CPU flags in CR0 -*/ -#define X86_CR0_PE 0x00000001/* Enable Protected Mode (RW) */ -#define X86_CR0_MP 0x00000002/* Monitor Coprocessor (RW) */ -#define X86_CR0_EM 0x00000004/* Require FPU Emulation (RO) */ -#define X86_CR0_TS 0x00000008/* Task Switched (RW) */ -#define X86_CR0_ET 0x00000010/* Extension type (RO) */ -#define X86_CR0_NE 0x00000020/* Numeric Error Reporting (RW) */ -#define X86_CR0_WP 0x00010000/* Supervisor Write Protect (RW) */ -#define X86_CR0_AM 0x00040000/* Alignment Checking (RW) */ -#define X86_CR0_NW 0x20000000/* Not Write-Through (RW) */ -#define X86_CR0_CD 0x40000000/* Cache Disable (RW) */ -#define X86_CR0_PG 0x80000000/* Paging (RW) */ - -/* -* Intel CPU features in CR4 -*/ -#define X86_CR4_VME 0x00000001/* enable vm86 extensions */ -#define X86_CR4_PVI 0x00000002/* virtual interrupts flag enable */ -#define X86_CR4_TSD 0x00000004/* disable time stamp at ipl 3 */ -#define X86_CR4_DE 0x00000008/* enable debugging extensions */ -#define X86_CR4_PSE 0x00000010/* enable page size extensions */ -#define X86_CR4_PAE 0x00000020/* enable physical address extensions */ -#define X86_CR4_MCE 0x00000040/* Machine check enable */ -#define X86_CR4_PGE 0x00000080/* enable global pages */ -#define X86_CR4_PCE 0x00000100/* enable performance counters at ipl 3 */ -#define X86_CR4_OSFXSR 0x00000200/* enable fast FPU save and restore */ -#define X86_CR4_OSXMMEXCPT 0x00000400/* enable unmasked SSE exceptions */ -#define X86_CR4_VMXE 0x00002000/* enable VMX */ -#define X86_CR4_SMXE 0x00004000/* enable SMX */ -#define X86_CR4_FSGSBASE 0x00010000/* enable {rd,wr}{fs,gs}base */ -#define X86_CR4_PCIDE 0x00020000/* enable PCID */ -#define X86_CR4_OSXSAVE 0x00040000/* enable XSAVE/XRSTOR */ -#define X86_CR4_SMEP 0x00100000/* enable SMEP */ -#define X86_CR4_SMAP 0x00200000/* enable SMAP */ -#define X86_CR4_PKE 0x00400000/* enable PKE */ - -/* -* Trap/fault mnemonics. -*/ -#define TRAP_divide_error 0 -#define TRAP_debug 1 -#define TRAP_nmi 2 -#define TRAP_int3 3 -#define TRAP_overflow 4 -#define TRAP_bounds 5 -#define TRAP_invalid_op 6 -#define TRAP_no_device 7 -#define TRAP_double_fault 8 -#define TRAP_copro_seg 9 -#define TRAP_invalid_tss 10 -#define TRAP_no_segment 11 -#define TRAP_stack_error 12 -#define TRAP_gp_fault 13 -#define TRAP_page_fault 14 -#define TRAP_spurious_int 15 -#define TRAP_copro_error 16 -#define TRAP_alignment_check 17 -#define TRAP_machine_check 18 -#define TRAP_simd_error 19 -#define TRAP_virtualisation 20 -#define TRAP_nr 32 - -#define TRAP_HAVE_EC \ - ((1u << TRAP_double_fault) | (1u << TRAP_invalid_tss) | \ - (1u << TRAP_no_segment) | (1u << TRAP_stack_error) | \ - (1u << TRAP_gp_fault) | (1u << TRAP_page_fault) | \ - (1u << TRAP_alignment_check))/* Set for entry via SYSCALL. Informs return code to use SYSRETQ not IRETQ. */ /* NB. Same as VGCF_in_syscall. No bits in common with any other TRAP_ defn. */
xen/include/asm-x86/x86-defns.h new file +100 -0
100 lines not on this page · raw message
Signature · 7 lines
2.11.0 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xen.org/xen-devel
Re: [PATCH v2 02/12] x86: extract macros to x86-defns.h
Quoted 22 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:07, <[email protected]> wrote:
xen/include/asm-x86/x86-defns.h new file +21
-0+/* +* Trap/fault mnemonics. +*/ +#define TRAP_divide_error 0 +#define TRAP_debug 1 +#define TRAP_nmi 2 +#define TRAP_int3 3 +#define TRAP_overflow 4 +#define TRAP_bounds 5 +#define TRAP_invalid_op 6 +#define TRAP_no_device 7 +#define TRAP_double_fault 8 +#define TRAP_copro_seg 9 +#define TRAP_invalid_tss 10 +#define TRAP_no_segment 11 +#define TRAP_stack_error 12 +#define TRAP_gp_fault 13 +#define TRAP_page_fault 14 +#define TRAP_spurious_int 15 +#define TRAP_copro_error 16 +#define TRAP_alignment_check 17
xen/include/asm-x86/x86-defns.h line 98
Quoted 10 lines
xen/include/asm-x86/x86-defns.h new file +10
-0+#define TRAP_machine_check 18 +#define TRAP_simd_error 19 +#define TRAP_virtualisation 20 +#define TRAP_nr 32 + +#define TRAP_HAVE_EC \ + ((1u << TRAP_double_fault) | (1u << TRAP_invalid_tss) | \ + (1u << TRAP_no_segment) | (1u << TRAP_stack_error) | \ + (1u << TRAP_gp_fault) | (1u << TRAP_page_fault) | \ + (1u << TRAP_alignment_check))
I agree with Andrew's reply to another patch: These shouldn't be moved here, and we should transition over to X86_EXC_*.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
Re: [PATCH v2 02/12] x86: extract macros to x86-defns.h
Quoted 27 lines · Jan Beulich
Quoted 27 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:07, <[email protected]> wrote:
xen/include/asm-x86/x86-defns.h new file +26
-0+/* +* Trap/fault mnemonics. +*/ +#define TRAP_divide_error 0 +#define TRAP_debug 1 +#define TRAP_nmi 2 +#define TRAP_int3 3 +#define TRAP_overflow 4 +#define TRAP_bounds 5 +#define TRAP_invalid_op 6 +#define TRAP_no_device 7 +#define TRAP_double_fault 8 +#define TRAP_copro_seg 9 +#define TRAP_invalid_tss 10 +#define TRAP_no_segment 11 +#define TRAP_stack_error 12 +#define TRAP_gp_fault 13 +#define TRAP_page_fault 14 +#define TRAP_spurious_int 15 +#define TRAP_copro_error 16 +#define TRAP_alignment_check 17 +#define TRAP_machine_check 18 +#define TRAP_simd_error 19 +#define TRAP_virtualisation 20 +#define TRAP_nr 32 +
Quoted 9 lines
xen/include/asm-x86/x86-defns.h line 98
Quoted 5 lines
xen/include/asm-x86/x86-defns.h new file +5
-0+#define TRAP_HAVE_EC \ + ((1u << TRAP_double_fault) | (1u << TRAP_invalid_tss) | \ + (1u << TRAP_no_segment) | (1u << TRAP_stack_error) | \ + (1u << TRAP_gp_fault) | (1u << TRAP_page_fault) | \ + (1u << TRAP_alignment_check))I agree with Andrew's reply to another patch: These shouldn't be moved here, and we should transition over to X86_EXC_*.
OK. I have no problem dropping this hunk and the patch that replaces EXC_ with TRAP_. I will leave that to Andrew.
Wei.
Quoted 2 lines
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
PATCH v2 3/12 x86: extract vendor numeric id to x86-vendors.h
In reply to Wei LiuThey will be shared between xen and userspace programs.
No functional change.
---
Cc: Jan Beulich <[email protected]>
Cc: Andrew Cooper <[email protected]>
--- xen/include/asm-x86/processor.h | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-)
xen/include/asm-x86/processor.h +1 -9
@@ -17,15 +17,7 @@#endif #include "x86-defns.h" - -/* -* CPU vendor IDs -*/ -#define X86_VENDOR_INTEL 0 -#define X86_VENDOR_AMD 1 -#define X86_VENDOR_CENTAUR 2 -#define X86_VENDOR_NUM 3 -#define X86_VENDOR_UNKNOWN 0xff +#include "x86-vendors.h" /* Set for entry via SYSCALL. Informs return code to use SYSRETQ not IRETQ. */
Signature · 7 lines
2.11.0 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xen.org/xen-devel
Re: [PATCH v2 03/12] x86: extract vendor numeric id to x86-vendors.h
Quoted 2 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
They will be shared between xen and userspace programs.
Please clarify here that this is not strictly necessary, but rather just a convenience / reduction of overall code size. Otherwise someone looking back in a couple of years may wonder where the hidden dependency is for values to be identical between hypervisor and user space testing code.
Quoted 3 lines
No functional change.
Signed-off-by Wei Liu <[email protected]>
With the above clarification in place,
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
PATCH v2 4/12 x86emul/test: use x86-vendors.h
In reply to Wei LiuNo functional change.
---
Cc: Jan Beulich <[email protected]>
Cc: Andrew Cooper <[email protected]>
--- tools/tests/x86_emulator/x86_emulate.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
tools/tests/x86_emulator/x86_emulate.h +2 -5
@@ -6,6 +6,8 @@#include <string.h> #include <xen/xen.h> +#include "../../../xen/include/asm-x86/x86-vendors.h" +#define BUG () abort()#define ASSERT assert#define ASSERT_UNREACHABLE () assert(!__LINE__)
@@ -38,11 +40,6 @@#define is_canonical_address (x) (((int64_t)(x) >> 47) == ((int64_t)(x) >> 63)) -/* There's no strict need for these to be in sync with processor.h. */ -#define X86_VENDOR_INTEL 0 -#define X86_VENDOR_AMD 2 -#define X86_VENDOR_UNKNOWN 0xff -#define MMAP_SZ 16384bool emul_test_make_stack_executable (void );
Signature · 7 lines
2.11.0 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xen.org/xen-devel
Re: [PATCH v2 04/12] x86emul/test: use x86-vendors.h
tools/tests/x86_emulator/x86_emulate.h line 9
Quoted 8 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
tools/tests/x86_emulator/x86_emulate.h +1
-0@@ -6,6 +6,8 @@#include <string.h> #include <xen/xen.h> +#include "../../../xen/include/asm-x86/x86-vendors.h"
I think we'd better avoid includes of this style. May I suggest symlinking the needed headers, just like we already do with the x86_emulate/x86_emulate[ch] files (perhaps to an include/ subdirectory in the build tree)?
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
Re: [PATCH v2 04/12] x86emul/test: use x86-vendors.h
Quoted 7 lines · Jan Beulich
Quoted 7 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
tools/tests/x86_emulator/x86_emulate.h +0
-0@@ -6,6 +6,8 @@#include <string.h> #include <xen/xen.h>
Quoted 7 lines
tools/tests/x86_emulator/x86_emulate.h line 9
Quoted 1 line
tools/tests/x86_emulator/x86_emulate.h +1
-0+#include "../../../xen/include/asm-x86/x86-vendors.h" I think we'd better avoid includes of this style. May I suggest symlinking the needed headers, just like we already do with the x86_emulate/x86_emulate[ch] files (perhaps to an
include/subdirectory in the build tree)?
I will just link this (and later headers) to tools/tests/x86_emulator -- using a dedicated directory is not strictly necessary.
Wei.
Quoted 2 lines
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
Re: [PATCH v2 04/12] x86emul/test: use x86-vendors.h
Quoted 16 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 15:36, <[email protected]> wrote:
Quoted 7 lines · Jan Beulich
Quoted 7 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
tools/tests/x86_emulator/x86_emulate.h +0
-0@@ -6,6 +6,8 @@#include <string.h> #include <xen/xen.h> Quoted 6 lines
tools/tests/x86_emulator/x86_emulate.h line 9
Quoted 1 line
tools/tests/x86_emulator/x86_emulate.h +1
-0+#include "../../../xen/include/asm-x86/x86-vendors.h" I think we'd better avoid includes of this style. May I suggest symlinking the needed headers, just like we already do with the x86_emulate/x86_emulate[ch] files (perhaps to an
include/subdirectory in the build tree)?
Quoted 2 lines
I will just link this (and later headers) to
tools/tests/x86_emulator-- using a dedicated directory is not strictly necessary.
Hmm, for consistency with hypervisor #include directives, linking to asm/ (and adding -I. to CFLAGS) might be a good idea.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
Re: [PATCH v2 04/12] x86emul/test: use x86-vendors.h
Quoted 16 lines · Jan Beulich
Quoted 16 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 15:36, <[email protected]> wrote:
Quoted 13 lines · Jan Beulich
tools/tests/x86_emulator/x86_emulate.h line 9
Quoted 8 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
tools/tests/x86_emulator/x86_emulate.h +1
-0@@ -6,6 +6,8 @@#include <string.h> #include <xen/xen.h> +#include "../../../xen/include/asm-x86/x86-vendors.h" I think we'd better avoid includes of this style. May I suggest symlinking the needed headers, just like we already do with the x86_emulate/x86_emulate[ch] files (perhaps to an
include/subdirectory in the build tree)?
Quoted 6 lines
Quoted 2 lines
I will just link this (and later headers) to
tools/tests/x86_emulator-- using a dedicated directory is not strictly necessary.Hmm, for consistency with hypervisor #include directives, linking to asm/ (and adding -I. to CFLAGS) might be a good idea.
Sure, I don't feel strongly about this.
Wei.
Quoted 2 lines
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
PATCH v2 5/12 x86emul: use eflags definitions in x86-defns.h
In reply to Wei LiuBasically this patch does 's/EFLG_/X86_EFLAGS_/g' and with indentation fixed up. And remove the duplicates in x86_emualte.c. This in turn requires userspace test harness to include x86-defns.h. Also remove a few duplicates in userspace harness program.
No functional change.
---
Cc: Jan Beulich <[email protected]>
Cc: Andrew Cooper <[email protected]>
--- tools/tests/x86_emulator/test_x86_emulator.c | 9 - tools/tests/x86_emulator/x86_emulate.h | 1 + xen/arch/x86/x86_emulate/x86_emulate.c | 321 +++++++++++++-------------- 3 files changed, 156 insertions(+), 175 deletions(-)
tools/tests/x86_emulator/test_x86_emulator.c +0 -9
@@ -23,15 +23,6 @@ static const struct {#endif }; -/* EFLAGS bit definitions. */ -#define EFLG_OF (1<<11) -#define EFLG_DF (1<<10) -#define EFLG_SF (1<<7) -#define EFLG_ZF (1<<6) -#define EFLG_AF (1<<4) -#define EFLG_PF (1<<2) -#define EFLG_CF (1<<0) -static unsigned int bytes_read; static int read(
tools/tests/x86_emulator/x86_emulate.h +1 -0
@@ -6,6 +6,7 @@#include <string.h> #include <xen/xen.h> +#include "../../../xen/include/asm-x86/x86-defns.h" #include "../../../xen/include/asm-x86/x86-vendors.h" #define BUG () abort()
xen/arch/x86/x86_emulate/x86_emulate.c +155 -166
895 lines not on this page · raw message
Signature · 7 lines
2.11.0 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xen.org/xen-devel
Re: [PATCH v2 05/12] x86emul: use eflags definitions in x86-defns.h
Quoted 12 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
xen/arch/x86/x86_emulate/x86_emulate.c +1
-2@@ -5016,20 +5004,20 @@ x86_emulate(/* * SYSCALL (unlike most instructions) evaluates its singlestep action -* based on the resulting EFLG_TF, not the starting EFLG_TF. +* based on the resulting X86_EFLAGS_TF, not the starting X86_EFLAGS_TF. * * As the #DB is raised after the CPL change and before the OS can * switch stack, it is a large risk for privilege escalation. * -* 64bit kernels should mask EFLG_TF in MSR_FMASK to avoid any
xen/arch/x86/x86_emulate/x86_emulate.c x86_emulate( · line 5018
Quoted 10 lines
xen/arch/x86/x86_emulate/x86_emulate.c +4
-3+* 64bit kernels should mask X86_EFLAGS_TF in MSR_FMASK to avoid any * vulnerability. Running the #DB handler on an IST stack is also a * mitigation. * -* 32bit kernels have no ability to mask EFLG_TF at all. Their only -* mitigation is to use a task gate for handling #DB (or to not use -* enable EFER.SCE to start with). +* 32bit kernels have no ability to mask X86_EFLAGS_TF at all. +* Their only mitigation is to use a task gate for handling +* #DB (or to not use enable EFER.SCE to start with).
Please use EFLAGS.TF instead here, matching e.g. EFER.SCE.
With this taken care of and the #include style matching whatever is chosen as the final model in the earlier patch,
However, I'd appreciate if you took the opportunity to add blanks around binary operators as mandated by our coding style, on the lines that you touch anyway.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
Re: [PATCH v2 05/12] x86emul: use eflags definitions in x86-defns.h
Quoted 16 lines · Jan Beulich
Quoted 16 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
xen/arch/x86/x86_emulate/x86_emulate.c +2
-2@@ -5016,20 +5004,20 @@ x86_emulate(/* * SYSCALL (unlike most instructions) evaluates its singlestep action -* based on the resulting EFLG_TF, not the starting EFLG_TF. +* based on the resulting X86_EFLAGS_TF, not the starting X86_EFLAGS_TF. * * As the #DB is raised after the CPL change and before the OS can * switch stack, it is a large risk for privilege escalation. * -* 64bit kernels should mask EFLG_TF in MSR_FMASK to avoid any +* 64bit kernels should mask X86_EFLAGS_TF in MSR_FMASK to avoid any * vulnerability. Running the #DB handler on an IST stack is also a * mitigation. *
Quoted 9 lines
xen/arch/x86/x86_emulate/x86_emulate.c x86_emulate( · line 5018
Quoted 6 lines
xen/arch/x86/x86_emulate/x86_emulate.c +3
-3-* 32bit kernels have no ability to mask EFLG_TF at all. Their only -* mitigation is to use a task gate for handling #DB (or to not use -* enable EFER.SCE to start with). +* 32bit kernels have no ability to mask X86_EFLAGS_TF at all. +* Their only mitigation is to use a task gate for handling +* #DB (or to not use enable EFER.SCE to start with). Please use EFLAGS.TF instead here, matching e.g. EFER.SCE.
Fixed.
Quoted 7 lines
With this taken care of and the #include style matching whatever is chosen as the final model in the earlier patch,
Reviewed-by Jan Beulich <[email protected]>However, I'd appreciate if you took the opportunity to add blanks around binary operators as mandated by our coding style, on the lines that you touch anyway.
The only place I can think of is the bitwise or '|', I will add blanks around that.
Wei.
Quoted 2 lines
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
Re: [PATCH v2 05/12] x86emul: use eflags definitions in x86-defns.h
Quoted 11 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 15:55, <[email protected]> wrote:
Quoted 6 lines · Jan Beulich
With this taken care of and the #include style matching whatever is chosen as the final model in the earlier patch,
Reviewed-by Jan Beulich <[email protected]>However, I'd appreciate if you took the opportunity to add blanks around binary operators as mandated by our coding style, on the lines that you touch anyway.
The only place I can think of is the bitwise or '|', I will add blanks around that.
Right, I too think I didn't seen other instances.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
PATCH v2 6/12 x86emul: use msr definitions in msr-index.h
In reply to Wei LiuChange the names used in code according to numeric values. Remove the now unused macros in x86_emualte.c and fix indentation. This in turns requires including msr-index.h and removing duplicates in userspace x86_emulate.c in userspace harness program.
No functional change.
---
Cc: Jan Beulich <[email protected]>
Cc: Andrew Cooper <[email protected]>
--- tools/tests/x86_emulator/x86_emulate.c | 3 --- tools/tests/x86_emulator/x86_emulate.h | 1 + xen/arch/x86/x86_emulate/x86_emulate.c | 43 ++++++++++++---------------------- 3 files changed, 16 insertions(+), 31 deletions(-)
tools/tests/x86_emulator/x86_emulate.c +0 -3
@@ -2,9 +2,6 @@#include <sys/mman.h> -#define EFER_SCE (1 << 0) -#define EFER_LMA (1 << 10) -#define cpu_has_amd_erratum (nr) 0#define mark_regs_dirty (r) ((void)(r))#define cpu_has_mpx false
tools/tests/x86_emulator/x86_emulate.h +1 -0
@@ -8,6 +8,7 @@#include "../../../xen/include/asm-x86/x86-defns.h" #include "../../../xen/include/asm-x86/x86-vendors.h" +#include "../../../xen/include/asm-x86/msr-index.h" #define BUG () abort()#define ASSERT assert
xen/arch/x86/x86_emulate/x86_emulate.c +15 -28
101 lines not on this page · raw message
Signature · 7 lines
2.11.0 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xen.org/xen-devel
Re: [PATCH v2 06/12] x86emul: use msr definitions in msr-index.h
Quoted 9 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
Change the names used in code according to numeric values. Remove the now unused macros in
x86_emualte.cand fix indentation. This in turns requires includingmsr-index.hand removing duplicates in userspacex86_emulate.cin userspace harness program.No functional change.
Signed-off-by Wei Liu <[email protected]>
Again with the #include style suitably adjusted
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
PATCH v2 7/12 x86: add UMIP CR4 bit
In reply to Wei LiuIt will be used later to remove duplicates in x86emul.
---
Cc: Jan Beulich <[email protected]>
Cc: Andrew Cooper <[email protected]>
--- xen/include/asm-x86/x86-defns.h | 1 + 1 file changed, 1 insertion(+)
xen/include/asm-x86/x86-defns.h +1 -0
@@ -56,6 +56,7 @@#define X86_CR4_PCE 0x00000100/* enable performance counters at ipl 3 */ #define X86_CR4_OSFXSR 0x00000200/* enable fast FPU save and restore */ #define X86_CR4_OSXMMEXCPT 0x00000400/* enable unmasked SSE exceptions */ +#define X86_CR4_UMIP 0x00000800/* enable UMIP */ #define X86_CR4_VMXE 0x00002000/* enable VMX */ #define X86_CR4_SMXE 0x00004000/* enable SMX */ #define X86_CR4_FSGSBASE 0x00010000/* enable {rd,wr}{fs,gs}base */
Signature · 7 lines
2.11.0 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xen.org/xen-devel
Re: [PATCH v2 07/12] x86: add UMIP CR4 bit
Quoted 4 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
It will be used later to remove duplicates in x86emul.
Signed-off-by Wei Liu <[email protected]>
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
PATCH v2 8/12 x86emul: use CR definitions in x86-defns.h
In reply to Wei LiuAnd remove the duplicates.
No functional change.
---
Cc: Jan Beulich <[email protected]>
Cc: Andrew Cooper <[email protected]>
--- xen/arch/x86/x86_emulate/x86_emulate.c | 45 ++++++++++++---------------------- 1 file changed, 15 insertions(+), 30 deletions(-)
xen/arch/x86/x86_emulate/x86_emulate.c +15 -30
@@ -415,21 +415,6 @@ typedef union {# define ASM_FLAG_OUT (yes, no) no#endif -/* Control register flags. */ -#define CR0_PE (1<<0) -#define CR0_MP (1<<1) -#define CR0_EM (1<<2) -#define CR0_TS (1<<3) - -#define CR4_VME (1<<0) -#define CR4_PVI (1<<1) -#define CR4_TSD (1<<2) -#define CR4_OSFXSR (1<<9) -#define CR4_OSXMMEXCPT (1<<10) -#define CR4_UMIP (1<<11) -#define CR4_FSGSBASE (1<<16) -#define CR4_OSXSAVE (1<<18) -/* Floating point status word definitions. */ #define FSW_ES (1U << 7)
@@ -810,7 +795,7 @@ static int _get_fpu(if ( rc !=X86EMUL_OKAY )return rc;generate_exception_if (!(cr4 & ((type == X86EMUL_FPU_xmm) - ?CR4_OSFXSR :CR4_OSXSAVE )), + ?X86_CR4_OSFXSR :X86_CR4_OSXSAVE )),EXC_UD ); }
@@ -820,16 +805,16 @@ static int _get_fpu(if ( type >= X86EMUL_FPU_ymm ) {/* Should be unreachable if VEX decoding is working correctly. */ -ASSERT ((cr0 &CR0_PE ) && !(ctxt->regs->_eflags &X86_EFLAGS_VM )); +ASSERT ((cr0 &X86_CR0_PE ) && !(ctxt->regs->_eflags &X86_EFLAGS_VM )); } -if ( cr0 &CR0_EM ) +if ( cr0 &X86_CR0_EM ) {generate_exception_if (type == X86EMUL_FPU_fpu,EXC_NM );generate_exception_if (type == X86EMUL_FPU_mmx,EXC_UD );generate_exception_if (type == X86EMUL_FPU_xmm,EXC_UD ); } -generate_exception_if ((cr0 &CR0_TS ) && - (type != X86EMUL_FPU_wait || (cr0 &CR0_MP )), +generate_exception_if ((cr0 &X86_CR0_TS ) && + (type != X86EMUL_FPU_wait || (cr0 &X86_CR0_MP )),EXC_NM ); }
@@ -852,7 +837,7 @@ do { \_put_fpu (); \if ( (_fic)->exn_raised ==EXC_XM && ops->read_cr && \ ops->read_cr (4 , &cr4, ctxt) ==X86EMUL_OKAY && \ - !(cr4 &CR4_OSXMMEXCPT ) ) \ + !(cr4 &X86_CR4_OSXMMEXCPT ) ) \ (_fic)->exn_raised =EXC_UD ; \generate_exception_if ((_fic)->exn_raised >=0 , \ (_fic)->exn_raised); \
@@ -1184,7 +1169,7 @@ _mode_iopl( rc = ops->read_cr (4 , &cr4, ctxt); \if ( rc !=X86EMUL_OKAY ) goto done; \ } \ - !!(cr4 & (_regs._eflags &X86_EFLAGS_VM ?CR4_VME :CR4_PVI )); \ + !!(cr4 & (_regs._eflags &X86_EFLAGS_VM ?X86_CR4_VME :X86_CR4_PVI )); \ }) static int ioport_access_check(
@@ -1258,7 +1243,7 @@ in_realmode(return 0 ; rc = ops->read_cr (0 , &cr0, ctxt); -return (!rc && !(cr0 &CR0_PE )); +return (!rc && !(cr0 &X86_CR0_PE )); } static bool
@@ -1726,7 +1711,7 @@ static bool umip_active(struct x86_emulate_ctxt *ctxt,/* Intentionally not using mode_ring0() here to avoid its fail_if(). */ return get_cpl (ctxt, ops) >0 && ops->read_cr && ops->read_cr (4 , &cr4, ctxt) ==X86EMUL_OKAY && - (cr4 &CR4_UMIP ); + (cr4 &X86_CR4_UMIP ); }/* Inject a software interrupt/exception, emulating if needed. */
@@ -3345,7 +3330,7 @@ x86_emulate(if ( rc !=X86EMUL_OKAY ) goto done; } -generate_exception_if (!(cr4 &CR4_VME ),EXC_GP ,0 ); +generate_exception_if (!(cr4 &X86_CR4_VME ),EXC_GP ,0 ); src.val = (_regs.flags & ~X86_EFLAGS_IF ) |X86_EFLAGS_IOPL ;if ( _regs._eflags &X86_EFLAGS_VIF ) src.val |=X86_EFLAGS_IF ;
@@ -3368,7 +3353,7 @@ x86_emulate(if ( rc !=X86EMUL_OKAY ) goto done; } -generate_exception_if (!(cr4 &CR4_VME ) && +generate_exception_if (!(cr4 &X86_CR4_VME ) &&MASK_EXTR (_regs._eflags,X86_EFLAGS_IOPL ) !=3 ,EXC_GP ,0 ); }
@@ -3385,7 +3370,7 @@ x86_emulate(if ( op_bytes ==2 ) { dst.val = (uint16_t )dst.val | (_regs._eflags &0xffff0000u ); -if ( cr4 &CR4_VME ) +if ( cr4 &X86_CR4_VME ) {if ( dst.val &X86_EFLAGS_IF ) {
@@ -5009,7 +4994,7 @@ x86_emulate(generate_exception_if (!mode_ring0 (),EXC_GP ,0 );fail_if ((ops->read_cr ==NULL ) || (ops->write_cr ==NULL ));if ( (rc = ops->read_cr (0 , &dst.val, ctxt)) !=X86EMUL_OKAY || - (rc = ops->write_cr (0 , dst.val & ~CR0_TS , ctxt)) !=X86EMUL_OKAY ) + (rc = ops->write_cr (0 , dst.val & ~X86_CR0_TS , ctxt)) !=X86EMUL_OKAY ) goto done;break ;
@@ -5187,7 +5172,7 @@ x86_emulate(fail_if (ops->read_cr ==NULL );if ( (rc = ops->read_cr (4 , &cr4, ctxt)) ) goto done; -generate_exception_if (cr4 &CR4_TSD ,EXC_GP ,0 ); +generate_exception_if (cr4 &X86_CR4_TSD ,EXC_GP ,0 ); }fail_if (ops->read_msr ==NULL );if ( (rc = ops->read_msr (MSR_IA32_TSC , &val, ctxt)) !=0 )
@@ -5560,7 +5545,7 @@ x86_emulate(fail_if (!ops->read_cr);if ( (rc = ops->read_cr (4 , &cr4, ctxt)) !=X86EMUL_OKAY ) goto done; -generate_exception_if (!(cr4 &CR4_FSGSBASE ),EXC_UD ); +generate_exception_if (!(cr4 &X86_CR4_FSGSBASE ),EXC_UD ); seg = modrm_reg &1 ? x86_seg_gs : x86_seg_fs;fail_if (!ops->read_segment);if ( (rc = ops->read_segment (seg, &sreg, ctxt)) !=X86EMUL_OKAY )
Signature · 7 lines
2.11.0 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xen.org/xen-devel
Re: [PATCH v2 08/12] x86emul: use CR definitions in x86-defns.h
Quoted 6 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
And remove the duplicates.
No functional change.
Signed-off-by Wei Liu <[email protected]>
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
PATCH v2 9/12 x86emul: use TRAP definitions in x86-defns.h
In reply to Wei LiuAnd remove duplicates.
No functional change.
---
Cc: Jan Beulich <[email protected]>
Cc: Andrew Cooper <[email protected]>
--- xen/arch/x86/x86_emulate/x86_emulate.c | 305 +++++++++++++++------------------ 1 file changed, 142 insertions(+), 163 deletions(-)
xen/arch/x86/x86_emulate/x86_emulate.c +142 -163
@@ -421,27 +421,6 @@ typedef union {/* MXCSR bit definitions. */ #define MXCSR_MM (1U << 17) -/* Exception definitions. */ -#define EXC_DE 0 -#define EXC_DB 1 -#define EXC_BP 3 -#define EXC_OF 4 -#define EXC_BR 5 -#define EXC_UD 6 -#define EXC_NM 7 -#define EXC_DF 8 -#define EXC_TS 10 -#define EXC_NP 11 -#define EXC_SS 12 -#define EXC_GP 13 -#define EXC_PF 14 -#define EXC_MF 16 -#define EXC_AC 17 -#define EXC_XM 19 - -#define EXC_HAS_EC \ - ((1u << EXC_DF) | (1u << EXC_TS) | (1u << EXC_NP) | \ - (1u << EXC_SS) | (1u << EXC_GP) | (1u << EXC_PF) | (1u << EXC_AC))/* Segment selector error code bits. */ #define ECODE_EXT (1 << 0)
@@ -642,7 +621,7 @@ do{ asm volatile ( \ state->ip += (_size);/* real hardware doesn't truncate */ \generate_exception_if ((uint8_t )(state->ip - \ ctxt->regs->r (ip)) >MAX_INST_LEN , \ -EXC_GP ,0 ); \ + TRAP_gp_fault,0 ); \ rc = ops->insn_fetch (x86_seg_cs, _ip, &_x, (_size), ctxt); \if ( rc ) goto done; \ _x; \
@@ -671,7 +650,7 @@ do { \static inline int mkec (uint8_t e,int32_t ec, ...) { -return (e <32 && ((1u << e) &EXC_HAS_EC )) ? ec :X86_EVENT_NO_EC ; +return (e <32 && ((1u << e) &TRAP_HAVE_EC )) ? ec :X86_EVENT_NO_EC ; } #define generate_exception_if(p, e, ec...) \
@@ -741,12 +720,12 @@ do { \#define validate_far_branch (cs, ip) ({ \ if ( sizeof(ip) <= 4 ) { \ ASSERT(in_longmode(ctxt, ops) <= 0); \ - generate_exception_if((ip) > (cs)->limit, EXC_GP, 0); \ + generate_exception_if((ip) > (cs)->limit, TRAP_gp_fault, 0); \ } else \ generate_exception_if(in_longmode(ctxt, ops) && \ (cs)->attr.fields.l \ ? !is_canonical_address(ip) \ - : (ip) > (cs)->limit, EXC_GP, 0); \ + : (ip) > (cs)->limit, TRAP_gp_fault, 0); \ })#define commit_far_branch (cs, newip) ({ \
@@ -796,7 +775,7 @@ static int _get_fpu(return rc;generate_exception_if (!(cr4 & ((type == X86EMUL_FPU_xmm) ?X86_CR4_OSFXSR :X86_CR4_OSXSAVE )), -EXC_UD ); + TRAP_invalid_op); } rc = ops->read_cr (0 , &cr0, ctxt);
@@ -809,13 +788,13 @@ static int _get_fpu( }if ( cr0 &X86_CR0_EM ) { -generate_exception_if (type == X86EMUL_FPU_fpu,EXC_NM ); -generate_exception_if (type == X86EMUL_FPU_mmx,EXC_UD ); -generate_exception_if (type == X86EMUL_FPU_xmm,EXC_UD ); +generate_exception_if (type == X86EMUL_FPU_fpu, TRAP_no_device); +generate_exception_if (type == X86EMUL_FPU_mmx, TRAP_invalid_op); +generate_exception_if (type == X86EMUL_FPU_xmm, TRAP_invalid_op); }generate_exception_if ((cr0 &X86_CR0_TS ) && (type != X86EMUL_FPU_wait || (cr0 &X86_CR0_MP )), -EXC_NM ); + TRAP_no_device); } done:
@@ -835,10 +814,10 @@ do { \#define put_fpu (_fic) \ do { \ _put_fpu(); \ - if ( (_fic)->exn_raised == EXC_XM && ops->read_cr && \ + if ( (_fic)->exn_raised == TRAP_simd_error && ops->read_cr && \ ops->read_cr(4, &cr4, ctxt) == X86EMUL_OKAY && \ !(cr4 & X86_CR4_OSXMMEXCPT) ) \ - (_fic)->exn_raised = EXC_UD; \ + (_fic)->exn_raised = TRAP_invalid_op; \ generate_exception_if((_fic)->exn_raised >= 0, \ (_fic)->exn_raised); \ } while (0)
@@ -1194,7 +1173,7 @@ static int ioport_access_check(return rc ==X86EMUL_DONE ?X86EMUL_OKAY : rc;/* Ensure the TSS has an io-bitmap-offset field. */ -generate_exception_if (tr.attr.fields.type !=0xb ,EXC_GP ,0 ); +generate_exception_if (tr.attr.fields.type !=0xb , TRAP_gp_fault,0 );switch ( rc =read_ulong (x86_seg_tr,0x66 , &iobmp,2 , ctxt, ops) ) {
@@ -1202,7 +1181,7 @@ static int ioport_access_check(break ;case X86EMUL_EXCEPTION : -generate_exception_if (!ctxt->event_pending,EXC_GP ,0 ); +generate_exception_if (!ctxt->event_pending, TRAP_gp_fault,0 );/* fallthrough */ default :
@@ -1217,7 +1196,7 @@ static int ioport_access_check(break ;case X86EMUL_EXCEPTION : -generate_exception_if (!ctxt->event_pending,EXC_GP ,0 ); +generate_exception_if (!ctxt->event_pending, TRAP_gp_fault,0 );/* fallthrough */ default :
@@ -1225,7 +1204,7 @@ static int ioport_access_check( }generate_exception_if (iobmp & (((1 << bytes) -1 ) << (first_port &7 )), -EXC_GP ,0 ); + TRAP_gp_fault,0 ); done:return rc;
@@ -1322,7 +1301,7 @@ static bool vcpu_has(#define vcpu_has_rdpid () vcpu_has( 7, ECX, 22, ctxt, ops)#define vcpu_must_have (feat) \ - generate_exception_if(!vcpu_has_##feat(), EXC_UD) + generate_exception_if(!vcpu_has_##feat(), TRAP_invalid_op)#ifdef __XEN__/*
@@ -1332,7 +1311,7 @@ static bool vcpu_has(* the actual operation. */ #define host_and_vcpu_must_have (feat) ({ \ - generate_exception_if(!cpu_has_##feat, EXC_UD); \ + generate_exception_if(!cpu_has_##feat, TRAP_invalid_op); \ vcpu_must_have(feat); \ })#else
@@ -1398,7 +1377,7 @@ protmode_load_seg(uint8_t dpl, rpl;int cpl =get_cpl (ctxt, ops);uint32_t a_flag =0x100 ; -int rc, fault_type =EXC_GP ; +int rc, fault_type = TRAP_gp_fault;if ( cpl <0 )return X86EMUL_UNHANDLEABLE ;
@@ -1527,7 +1506,7 @@ protmode_load_seg(/* Segment present in memory? */ if ( !(desc.b & (1 <<15 )) && seg != x86_seg_none ) { - fault_type = seg != x86_seg_ss ?EXC_NP :EXC_SS ; + fault_type = seg != x86_seg_ss ? TRAP_no_segment : TRAP_stack_error; goto raise_exn; }
@@ -1720,7 +1699,7 @@ static int inject_swint(enum x86_swint_type type,struct x86_emulate_ctxt *ctxt, const struct x86_emulate_ops *ops) { - int rc, error_code, fault_type = EXC_GP; + int rc, error_code, fault_type = TRAP_gp_fault;/* * Without hardware support, injecting software interrupts/exceptions is
@@ -1834,7 +1813,7 @@ static int inject_swint(enum x86_swint_type type,/* Is this entry present? */ if ( !(idte.b & (1u <<15 )) ) { - fault_type =EXC_NP ; + fault_type = TRAP_no_segment; goto raise_exn; } }
@@ -1989,7 +1968,7 @@ x86_decode_onebyte(case 0x9a :/* call (far, absolute) */ case 0xea :/* jmp (far, absolute) */ -generate_exception_if (mode_64bit (),EXC_UD ); +generate_exception_if (mode_64bit (), TRAP_invalid_op); imm1 =insn_fetch_bytes (op_bytes); imm2 =insn_fetch_type (uint16_t);
@@ -2083,7 +2062,7 @@ x86_decode_twobyte( }/* fall through */ case 0x21 :case 0x23 :/* mov to/from dr */ -generate_exception_if (lock_prefix || ea.type !=OP_REG ,EXC_UD ); +generate_exception_if (lock_prefix || ea.type !=OP_REG , TRAP_invalid_op); op_bytes =mode_64bit () ?8 :4 ;break ;
@@ -2274,7 +2253,7 @@ x86_decode(/* fall through */ case 8 :/* VEX / XOP / EVEX */ -generate_exception_if (rex_prefix || vex.pfx,EXC_UD ); +generate_exception_if (rex_prefix || vex.pfx, TRAP_invalid_op);/* * With operand size override disallowed (see above), op_bytes * should not have changed from its default.
@@ -2665,7 +2644,7 @@ x86_emulate( d = state.desc;#define state (&state) -generate_exception_if (state->not_64bit &&mode_64bit (),EXC_UD ); +generate_exception_if (state->not_64bit &&mode_64bit (), TRAP_invalid_op);if ( ea.type ==OP_REG ) ea.reg = decode_register(modrm_rm, &_regs,
@@ -2744,12 +2723,12 @@ x86_emulate(* CMPXCHG{8,16}B (MOV CRn is being handled elsewhere). */ generate_exception_if (lock_prefix && (ext != ext_0f || b !=0xc7 ), -EXC_UD ); + TRAP_invalid_op); dst.type =OP_NONE ;break ;case DstReg: -generate_exception_if (lock_prefix,EXC_UD ); +generate_exception_if (lock_prefix, TRAP_invalid_op); dst.type =OP_REG ;if ( d & ByteOp ) {
@@ -2804,7 +2783,7 @@ x86_emulate( dst = ea;if ( dst.type ==OP_REG ) { -generate_exception_if (lock_prefix,EXC_UD ); +generate_exception_if (lock_prefix, TRAP_invalid_op);switch ( dst.bytes ) {case 1 : dst.val = *(uint8_t *)dst.reg;break ;
@@ -2824,7 +2803,7 @@ x86_emulate(else {/* Lock prefix is allowed only on RMW instructions. */ -generate_exception_if (lock_prefix,EXC_UD ); +generate_exception_if (lock_prefix, TRAP_invalid_op);fail_if (!ops->write); }break ;
@@ -2866,7 +2845,7 @@ x86_emulate(break ; case 0x38 ... 0x3d: cmp: /* cmp */ -generate_exception_if (lock_prefix,EXC_UD ); +generate_exception_if (lock_prefix, TRAP_invalid_op);emulate_2op_SrcV ("cmp" , src, dst, _regs._eflags); dst.type =OP_NONE ;break ;
@@ -3003,14 +2982,14 @@ x86_emulate(case 0x62 :/* bound */ {unsigned long src_val2;int lb, ub, idx; -generate_exception_if (src.type !=OP_MEM ,EXC_UD ); +generate_exception_if (src.type !=OP_MEM , TRAP_invalid_op);if ( (rc =read_ulong (src.mem.seg, src.mem.off + op_bytes, &src_val2, op_bytes, ctxt, ops)) ) goto done; ub = (op_bytes ==2 ) ? (int16_t )src_val2 : (int32_t )src_val2; lb = (op_bytes ==2 ) ? (int16_t )src.val : (int32_t )src.val; idx = (op_bytes ==2 ) ? (int16_t )dst.val : (int32_t )dst.val; -generate_exception_if ((idx < lb) || (idx > ub),EXC_BR ); +generate_exception_if ((idx < lb) || (idx > ub), TRAP_bounds); dst.type =OP_NONE ;break ; }
@@ -3048,7 +3027,7 @@ x86_emulate( _regs._eflags &= ~X86_EFLAGS_ZF ; dst.type =OP_NONE ; } -generate_exception_if (!in_protmode (ctxt, ops),EXC_UD ); +generate_exception_if (!in_protmode (ctxt, ops), TRAP_invalid_op); }break ;
@@ -3212,7 +3191,7 @@ x86_emulate( dst.type =OP_NONE ;break ; } -generate_exception_if ((modrm_reg &7 ) !=0 ,EXC_UD ); +generate_exception_if ((modrm_reg &7 ) !=0 , TRAP_invalid_op); case 0x88 ... 0x8b: /* mov */ case 0xa0 ... 0xa1: /* mov mem.offs,{%al,%ax,%eax,%rax} */ case 0xa2 ... 0xa3: /* mov {%al,%ax,%eax,%rax},mem.offs */
@@ -3221,7 +3200,7 @@ x86_emulate(case 0x8c :/* mov Sreg,r/m */ seg = modrm_reg &7 ;/* REX.R is ignored. */ -generate_exception_if (!is_x86_user_segment (seg),EXC_UD ); +generate_exception_if (!is_x86_user_segment (seg), TRAP_invalid_op); store_selector:fail_if (ops->read_segment ==NULL );if ( (rc = ops->read_segment (seg, &sreg, ctxt)) !=0 )
@@ -3234,7 +3213,7 @@ x86_emulate(case 0x8e :/* mov r/m,Sreg */ seg = modrm_reg &7 ;/* REX.R is ignored. */ generate_exception_if (!is_x86_user_segment (seg) || - seg == x86_seg_cs,EXC_UD ); + seg == x86_seg_cs, TRAP_invalid_op);if ( (rc =load_seg (seg, src.val,0 ,NULL , ctxt, ops)) !=0 ) goto done;if ( seg == x86_seg_ss )
@@ -3243,12 +3222,12 @@ x86_emulate(break ;case 0x8d :/* lea */ -generate_exception_if (ea.type !=OP_MEM ,EXC_UD ); +generate_exception_if (ea.type !=OP_MEM , TRAP_invalid_op); dst.val = ea.mem.off;break ;case 0x8f :/* pop (sole member of Grp1a) */ -generate_exception_if ((modrm_reg &7 ) !=0 ,EXC_UD ); +generate_exception_if ((modrm_reg &7 ) !=0 , TRAP_invalid_op);/* 64-bit mode: POP defaults to a 64-bit operand. */ if (mode_64bit () && (dst.bytes ==4 ) ) dst.bytes =8 ;
@@ -3330,7 +3309,7 @@ x86_emulate(if ( rc !=X86EMUL_OKAY ) goto done; } -generate_exception_if (!(cr4 &X86_CR4_VME ),EXC_GP ,0 ); +generate_exception_if (!(cr4 &X86_CR4_VME ), TRAP_gp_fault,0 ); src.val = (_regs.flags & ~X86_EFLAGS_IF ) |X86_EFLAGS_IOPL ;if ( _regs._eflags &X86_EFLAGS_VIF ) src.val |=X86_EFLAGS_IF ;
@@ -3355,7 +3334,7 @@ x86_emulate( }generate_exception_if (!(cr4 &X86_CR4_VME ) &&MASK_EXTR (_regs._eflags,X86_EFLAGS_IOPL ) !=3 , -EXC_GP ,0 ); + TRAP_gp_fault,0 ); } mask |=X86_EFLAGS_IOPL ;if ( !mode_iopl () )
@@ -3375,7 +3354,7 @@ x86_emulate(if ( dst.val &X86_EFLAGS_IF ) {generate_exception_if (_regs._eflags &X86_EFLAGS_VIP , -EXC_GP ,0 ); + TRAP_gp_fault,0 ); dst.val |=X86_EFLAGS_VIF ; }else
@@ -3553,7 +3532,7 @@ x86_emulate(case 0xc5 :/* lds */ seg = (b &1 ) *3 ;/* es = 0, ds = 3 */ les: -generate_exception_if (src.type !=OP_MEM ,EXC_UD ); +generate_exception_if (src.type !=OP_MEM , TRAP_invalid_op);if ( (rc =read_ulong (src.mem.seg, src.mem.off + src.bytes, &dst.val,2 , ctxt, ops)) !=X86EMUL_OKAY ) goto done;
@@ -3625,7 +3604,7 @@ x86_emulate(break ;case 0xcc :/* int3 */ - src.val =EXC_BP ; + src.val = TRAP_int3; swint_type = x86_swint_int3; goto swint;
@@ -3640,7 +3619,7 @@ x86_emulate(case 0xce :/* into */ if ( !(_regs._eflags &X86_EFLAGS_OF ) )break ; - src.val =EXC_OF ; + src.val = TRAP_overflow; swint_type = x86_swint_into; goto swint;
@@ -3689,7 +3668,7 @@ x86_emulate( {uint8_t al = _regs.al; -generate_exception_if (!base,EXC_DE ); +generate_exception_if (!base, TRAP_divide_error); _regs.ax = ((al / base) <<8 ) | (al % base); } _regs._eflags &= ~(X86_EFLAGS_SF |X86_EFLAGS_ZF |X86_EFLAGS_PF );
@@ -3805,7 +3784,7 @@ x86_emulate(emulate_fpu_insn_stub (0xd9 , modrm);break ;default : -generate_exception_if (ea.type !=OP_MEM ,EXC_UD ); +generate_exception_if (ea.type !=OP_MEM , TRAP_invalid_op); dst = ea;switch ( modrm_reg &7 ) {
@@ -3840,7 +3819,7 @@ x86_emulate( dst.bytes =2 ;break ;default : -generate_exception (EXC_UD ); +generate_exception (TRAP_invalid_op); }/* * Control instructions can't raise FPU exceptions, so we need
@@ -3869,7 +3848,7 @@ x86_emulate(emulate_fpu_insn_stub (0xda , modrm);break ;default : -generate_exception_if (ea.type !=OP_MEM ,EXC_UD ); +generate_exception_if (ea.type !=OP_MEM , TRAP_invalid_op);if ( (rc = ops->read (ea.mem.seg, ea.mem.off, &src.val,4 , ctxt)) !=X86EMUL_OKAY ) goto done;
@@ -3927,7 +3906,7 @@ x86_emulate(emulate_fpu_insn_stub (0xdb , modrm);break ;default : -generate_exception_if (ea.type !=OP_MEM ,EXC_UD ); +generate_exception_if (ea.type !=OP_MEM , TRAP_invalid_op); dst = ea;switch ( modrm_reg &7 ) {
@@ -3968,7 +3947,7 @@ x86_emulate( dst.type =OP_NONE ;break ;default : -generate_exception (EXC_UD ); +generate_exception (TRAP_invalid_op); }if ( dst.type ==OP_MEM && !fpu_check_write () ) dst.type =OP_NONE ;
@@ -4041,7 +4020,7 @@ x86_emulate(emulate_fpu_insn_stub (0xdd , modrm);break ;default : -generate_exception_if (ea.type !=OP_MEM ,EXC_UD ); +generate_exception_if (ea.type !=OP_MEM , TRAP_invalid_op); dst = ea;switch ( modrm_reg &7 ) {
@@ -4073,7 +4052,7 @@ x86_emulate( dst.bytes =2 ;break ;default : -generate_exception (EXC_UD ); +generate_exception (TRAP_invalid_op); }/* * Control instructions can't raise FPU exceptions, so we need
@@ -4102,7 +4081,7 @@ x86_emulate(emulate_fpu_insn_stub (0xde , modrm);break ;default : -generate_exception_if (ea.type !=OP_MEM ,EXC_UD ); +generate_exception_if (ea.type !=OP_MEM , TRAP_invalid_op);switch ( modrm_reg &7 ) {case 0 :/* fiadd m16i */
@@ -4158,7 +4137,7 @@ x86_emulate(emulate_fpu_insn_stub (0xdf , modrm);break ;default : -generate_exception_if (ea.type !=OP_MEM ,EXC_UD ); +generate_exception_if (ea.type !=OP_MEM , TRAP_invalid_op); dst = ea;switch ( modrm_reg &7 ) {
@@ -4296,12 +4275,12 @@ x86_emulate(break ;case 0xf1 :/* int1 (icebp) */ - src.val =EXC_DB ; + src.val = TRAP_debug; swint_type = x86_swint_icebp; goto swint;case 0xf4 :/* hlt */ -generate_exception_if (!mode_ring0 (),EXC_GP ,0 ); +generate_exception_if (!mode_ring0 (), TRAP_gp_fault,0 ); ctxt->retire.hlt = true;break ;
@@ -4317,7 +4296,7 @@ x86_emulate(unsigned long u[2 ], v; case 0 ... 1: /* test */ -generate_exception_if (lock_prefix,EXC_UD ); +generate_exception_if (lock_prefix, TRAP_invalid_op); goto test;case 2 :/* not */ dst.val = ~dst.val;
@@ -4412,7 +4391,7 @@ x86_emulate( v = (uint8_t )src.val;generate_exception_if (div_dbl (u, v) || ((uint8_t )u[0 ] != (uint16_t )u[0 ]), -EXC_DE ); + TRAP_divide_error); dst.val = (uint8_t )u[0 ]; _regs.ah = u[1 ];break ;
@@ -4422,7 +4401,7 @@ x86_emulate( v = (uint16_t )src.val;generate_exception_if (div_dbl (u, v) || ((uint16_t )u[0 ] != (uint32_t )u[0 ]), -EXC_DE ); + TRAP_divide_error); dst.val = (uint16_t )u[0 ]; _regs.dx = u[1 ];break ;
@@ -4433,7 +4412,7 @@ x86_emulate( v = (uint32_t )src.val;generate_exception_if (div_dbl (u, v) || ((uint32_t )u[0 ] != u[0 ]), -EXC_DE ); + TRAP_divide_error); dst.val = (uint32_t )u[0 ]; _regs.rdx = (uint32_t )u[1 ];break ;
@@ -4442,7 +4421,7 @@ x86_emulate( u[0 ] = _regs.r (ax); u[1 ] = _regs.r (dx); v = src.val; -generate_exception_if (div_dbl (u, v),EXC_DE ); +generate_exception_if (div_dbl (u, v), TRAP_divide_error); dst.val = u[0 ]; _regs.r (dx) = u[1 ];break ;
@@ -4457,7 +4436,7 @@ x86_emulate( v = (int8_t )src.val;generate_exception_if (idiv_dbl (u, v) || ((int8_t )u[0 ] != (int16_t )u[0 ]), -EXC_DE ); + TRAP_divide_error); dst.val = (int8_t )u[0 ]; _regs.ah = u[1 ];break ;
@@ -4467,7 +4446,7 @@ x86_emulate( v = (int16_t )src.val;generate_exception_if (idiv_dbl (u, v) || ((int16_t )u[0 ] != (int32_t )u[0 ]), -EXC_DE ); + TRAP_divide_error); dst.val = (int16_t )u[0 ]; _regs.dx = u[1 ];break ;
@@ -4478,7 +4457,7 @@ x86_emulate( v = (int32_t )src.val;generate_exception_if (idiv_dbl (u, v) || ((int32_t )u[0 ] != u[0 ]), -EXC_DE ); + TRAP_divide_error); dst.val = (int32_t )u[0 ]; _regs.rdx = (uint32_t )u[1 ];break ;
@@ -4487,7 +4466,7 @@ x86_emulate( u[0 ] = _regs.r (ax); u[1 ] = _regs.r (dx); v = src.val; -generate_exception_if (idiv_dbl (u, v),EXC_DE ); +generate_exception_if (idiv_dbl (u, v), TRAP_divide_error); dst.val = u[0 ]; _regs.r (dx) = u[1 ];break ;
@@ -4509,7 +4488,7 @@ x86_emulate( _regs._eflags &= ~X86_EFLAGS_IF ; else { -generate_exception_if (!mode_vif (),EXC_GP ,0 ); +generate_exception_if (!mode_vif (), TRAP_gp_fault,0 ); _regs._eflags &= ~X86_EFLAGS_VIF ; }break ;
@@ -4525,7 +4504,7 @@ x86_emulate( {generate_exception_if ((_regs._eflags &X86_EFLAGS_VIP ) || !mode_vif (), -EXC_GP ,0 ); + TRAP_gp_fault,0 );if ( !(_regs._eflags &X86_EFLAGS_VIF ) ) ctxt->retire.sti = true; _regs._eflags |=X86_EFLAGS_VIF ;
@@ -4541,7 +4520,7 @@ x86_emulate(break ;case 0xfe :/* Grp4 */ -generate_exception_if ((modrm_reg &7 ) >=2 ,EXC_UD ); +generate_exception_if ((modrm_reg &7 ) >=2 , TRAP_invalid_op);/* Fallthrough. */ case 0xff :/* Grp5 */ switch ( modrm_reg & 7 )
@@ -4569,7 +4548,7 @@ x86_emulate(break ;case 3 :/* call (far, absolute indirect) */ case 5 :/* jmp (far, absolute indirect) */ -generate_exception_if (src.type !=OP_MEM ,EXC_UD ); +generate_exception_if (src.type !=OP_MEM , TRAP_invalid_op);if ( (rc =read_ulong (src.mem.seg, src.mem.off + op_bytes, &imm2,2 , ctxt, ops)) )
@@ -4581,20 +4560,20 @@ x86_emulate(case 6 :/* push */ goto push;case 7 : -generate_exception (EXC_UD ); +generate_exception (TRAP_invalid_op); }break ;case X86EMUL_OPC (0x0f ,0x00 ):/* Grp6 */ seg = (modrm_reg &1 ) ? x86_seg_tr : x86_seg_ldtr; -generate_exception_if (!in_protmode (ctxt, ops),EXC_UD ); +generate_exception_if (!in_protmode (ctxt, ops), TRAP_invalid_op);switch ( modrm_reg &6 ) {case 0 :/* sldt / str */ -generate_exception_if (umip_active (ctxt, ops),EXC_GP ,0 ); +generate_exception_if (umip_active (ctxt, ops), TRAP_gp_fault,0 ); goto store_selector;case 2 :/* lldt / ltr */ -generate_exception_if (!mode_ring0 (),EXC_GP ,0 ); +generate_exception_if (!mode_ring0 (), TRAP_gp_fault,0 );if ( (rc =load_seg (seg, src.val,0 ,NULL , ctxt, ops)) !=0 ) goto done;break ;
@@ -4612,7 +4591,7 @@ x86_emulate(case X86EMUL_EXCEPTION :if ( ctxt->event_pending ) { -ASSERT (ctxt->event.vector ==EXC_PF ); +ASSERT (ctxt->event.vector == TRAP_page_fault);default : goto done; }
@@ -4622,7 +4601,7 @@ x86_emulate( }break ;default : -generate_exception_if (true,EXC_UD ); +generate_exception_if (true, TRAP_invalid_op);break ; }break ;
@@ -4635,7 +4614,7 @@ x86_emulate(case 0xca :/* clac */ case 0xcb :/* stac */ vcpu_must_have (smap); -generate_exception_if (vex.pfx || !mode_ring0 (),EXC_UD ); +generate_exception_if (vex.pfx || !mode_ring0 (), TRAP_invalid_op); _regs._eflags &= ~X86_EFLAGS_AC ;if ( modrm ==0xcb )
@@ -4644,41 +4623,41 @@ x86_emulate(#ifdef __XEN__case 0xd1 :/* xsetbv */ -generate_exception_if (vex.pfx,EXC_UD ); +generate_exception_if (vex.pfx, TRAP_invalid_op);if ( !ops->read_cr || ops->read_cr (4 , &cr4, ctxt) !=X86EMUL_OKAY ) cr4 =0 ; -generate_exception_if (!(cr4 &X86_CR4_OSXSAVE ),EXC_UD ); +generate_exception_if (!(cr4 &X86_CR4_OSXSAVE ), TRAP_invalid_op);generate_exception_if (!mode_ring0 () ||handle_xsetbv (_regs._ecx, _regs._eax | (_regs.rdx <<32 )), -EXC_GP ,0 ); + TRAP_gp_fault,0 ); goto complete_insn;#endif case 0xd4 :/* vmfunc */ -generate_exception_if (vex.pfx,EXC_UD ); +generate_exception_if (vex.pfx, TRAP_invalid_op);fail_if (!ops->vmfunc);if ( (rc = ops->vmfunc (ctxt)) !=X86EMUL_OKAY ) goto done; goto complete_insn;case 0xd5 :/* xend */ -generate_exception_if (vex.pfx,EXC_UD ); -generate_exception_if (!vcpu_has_rtm (),EXC_UD ); -generate_exception_if (vcpu_has_rtm (),EXC_GP ,0 ); +generate_exception_if (vex.pfx, TRAP_invalid_op); +generate_exception_if (!vcpu_has_rtm (), TRAP_invalid_op); +generate_exception_if (vcpu_has_rtm (), TRAP_gp_fault,0 );break ;case 0xd6 :/* xtest */ -generate_exception_if (vex.pfx,EXC_UD ); +generate_exception_if (vex.pfx, TRAP_invalid_op);generate_exception_if (!vcpu_has_rtm () && !vcpu_has_hle (), -EXC_UD ); + TRAP_invalid_op);/* Neither HLE nor RTM can be active when we get here. */ _regs._eflags |=X86_EFLAGS_ZF ; goto complete_insn;case 0xdf :/* invlpga */ -generate_exception_if (!in_protmode (ctxt, ops),EXC_UD ); -generate_exception_if (!mode_ring0 (),EXC_GP ,0 ); +generate_exception_if (!in_protmode (ctxt, ops), TRAP_invalid_op); +generate_exception_if (!mode_ring0 (), TRAP_gp_fault,0 );fail_if (ops->invlpg ==NULL );if ( (rc = ops->invlpg (x86_seg_none,truncate_ea (_regs.r (ax)), ctxt)) )
@@ -4706,7 +4685,7 @@ x86_emulate( ops->cpuid(1, 0, &cpuid_leaf, ctxt) == X86EMUL_OKAY ) limit = ((cpuid_leaf.b >>8 ) &0xff ) *8 ;generate_exception_if (limit <sizeof (long ) || - (limit & (limit -1 )),EXC_UD ); + (limit & (limit -1 )), TRAP_invalid_op); base &= ~(limit -1 );if ( ops->rep_stos ) {
@@ -4741,8 +4720,8 @@ x86_emulate( {case 0 :/* sgdt */ case 1 :/* sidt */ -generate_exception_if (ea.type !=OP_MEM ,EXC_UD ); -generate_exception_if (umip_active (ctxt, ops),EXC_GP ,0 ); +generate_exception_if (ea.type !=OP_MEM , TRAP_invalid_op); +generate_exception_if (umip_active (ctxt, ops), TRAP_gp_fault,0 );fail_if (!ops->read_segment || !ops->write);if ( (rc = ops->read_segment (seg, &sreg, ctxt)) ) goto done;
@@ -4761,8 +4740,8 @@ x86_emulate(break ;case 2 :/* lgdt */ case 3 :/* lidt */ -generate_exception_if (!mode_ring0 (),EXC_GP ,0 ); -generate_exception_if (ea.type !=OP_MEM ,EXC_UD ); +generate_exception_if (!mode_ring0 (), TRAP_gp_fault,0 ); +generate_exception_if (ea.type !=OP_MEM , TRAP_invalid_op);fail_if (ops->write_segment ==NULL );memset (&sreg,0 ,sizeof (sreg)); if ( (rc = read_ulong(ea.mem.seg, ea.mem.off+0,
@@ -4770,7 +4749,7 @@ x86_emulate( (rc = read_ulong(ea.mem.seg, ea.mem.off+2, &base, mode_64bit() ? 8 : 4, ctxt, ops)) ) goto done; -generate_exception_if (!is_canonical_address (base),EXC_GP ,0 ); +generate_exception_if (!is_canonical_address (base), TRAP_gp_fault,0 ); sreg.base = base; sreg.limit = limit;if ( !mode_64bit () && op_bytes ==2 )
@@ -4779,7 +4758,7 @@ x86_emulate( goto done;break ;case 4 :/* smsw */ -generate_exception_if (umip_active (ctxt, ops),EXC_GP ,0 ); +generate_exception_if (umip_active (ctxt, ops), TRAP_gp_fault,0 );if ( ea.type ==OP_MEM ) {fail_if (!ops->write);
@@ -4796,7 +4775,7 @@ x86_emulate(case 6 :/* lmsw */ fail_if (ops->read_cr ==NULL );fail_if (ops->write_cr ==NULL ); -generate_exception_if (!mode_ring0 (),EXC_GP ,0 ); +generate_exception_if (!mode_ring0 (), TRAP_gp_fault,0 );if ( (rc = ops->read_cr (0 , &cr0, ctxt)) ) goto done;if ( ea.type ==OP_REG )
@@ -4810,8 +4789,8 @@ x86_emulate( goto done;break ;case 7 :/* invlpg */ -generate_exception_if (!mode_ring0 (),EXC_GP ,0 ); -generate_exception_if (ea.type !=OP_MEM ,EXC_UD ); +generate_exception_if (!mode_ring0 (), TRAP_gp_fault,0 ); +generate_exception_if (ea.type !=OP_MEM , TRAP_invalid_op);fail_if (ops->invlpg ==NULL );if ( (rc = ops->invlpg (ea.mem.seg, ea.mem.off, ctxt)) ) goto done;
@@ -4823,7 +4802,7 @@ x86_emulate( }case X86EMUL_OPC (0x0f ,0x02 ):/* lar */ -generate_exception_if (!in_protmode (ctxt, ops),EXC_UD ); +generate_exception_if (!in_protmode (ctxt, ops), TRAP_invalid_op); _regs._eflags &= ~X86_EFLAGS_ZF ; switch ( rc = protmode_load_seg(x86_seg_none, src.val, false, &sreg, ctxt, ops) )
@@ -4854,7 +4833,7 @@ x86_emulate(case X86EMUL_EXCEPTION :if ( ctxt->event_pending ) { -ASSERT (ctxt->event.vector ==EXC_PF ); +ASSERT (ctxt->event.vector == TRAP_page_fault);default : goto done; }
@@ -4872,7 +4851,7 @@ x86_emulate(break ;case X86EMUL_OPC (0x0f ,0x03 ):/* lsl */ -generate_exception_if (!in_protmode (ctxt, ops),EXC_UD ); +generate_exception_if (!in_protmode (ctxt, ops), TRAP_invalid_op); _regs._eflags &= ~X86_EFLAGS_ZF ; switch ( rc = protmode_load_seg(x86_seg_none, src.val, false, &sreg, ctxt, ops) )
@@ -4900,7 +4879,7 @@ x86_emulate(case X86EMUL_EXCEPTION :if ( ctxt->event_pending ) { -ASSERT (ctxt->event.vector ==EXC_PF ); +ASSERT (ctxt->event.vector == TRAP_page_fault);default : goto done; }
@@ -4917,13 +4896,13 @@ x86_emulate(case X86EMUL_OPC (0x0f ,0x05 ):/* syscall */ {uint64_t msr_content; -generate_exception_if (!in_protmode (ctxt, ops),EXC_UD ); +generate_exception_if (!in_protmode (ctxt, ops), TRAP_invalid_op);/* Inject #UD if syscall/sysret are disabled. */ fail_if (ops->read_msr ==NULL );if ( (rc = ops->read_msr (MSR_EFER , &msr_content, ctxt)) !=0 ) goto done; -generate_exception_if ((msr_content &EFER_SCE ) ==0 ,EXC_UD ); +generate_exception_if ((msr_content &EFER_SCE ) ==0 , TRAP_invalid_op);if ( (rc = ops->read_msr (MSR_STAR , &msr_content, ctxt)) !=0 ) goto done;
@@ -4991,7 +4970,7 @@ x86_emulate( }case X86EMUL_OPC (0x0f ,0x06 ):/* clts */ -generate_exception_if (!mode_ring0 (),EXC_GP ,0 ); +generate_exception_if (!mode_ring0 (), TRAP_gp_fault,0 );fail_if ((ops->read_cr ==NULL ) || (ops->write_cr ==NULL ));if ( (rc = ops->read_cr (0 , &dst.val, ctxt)) !=X86EMUL_OKAY || (rc = ops->write_cr (0 , dst.val & ~X86_CR0_TS , ctxt)) !=X86EMUL_OKAY )
@@ -5000,7 +4979,7 @@ x86_emulate(case X86EMUL_OPC (0x0f ,0x08 ):/* invd */ case X86EMUL_OPC (0x0f ,0x09 ):/* wbinvd */ -generate_exception_if (!mode_ring0 (),EXC_GP ,0 ); +generate_exception_if (!mode_ring0 (), TRAP_gp_fault,0 );fail_if (ops->wbinvd ==NULL );if ( (rc = ops->wbinvd (ctxt)) !=0 ) goto done;
@@ -5009,7 +4988,7 @@ x86_emulate(case X86EMUL_OPC (0x0f ,0x0b ):/* ud2 */ case X86EMUL_OPC (0x0f ,0xb9 ):/* ud1 */ case X86EMUL_OPC (0x0f ,0xff ):/* ud0 */ -generate_exception (EXC_UD ); +generate_exception (TRAP_invalid_op);case X86EMUL_OPC (0x0f ,0x0d ):/* GrpP (prefetch) */ case X86EMUL_OPC (0x0f ,0x18 ):/* Grp16 (prefetch/nop) */
@@ -5098,7 +5077,7 @@ x86_emulate(generate_exception_if (!(mxcsr &MXCSR_MM ) && !is_aligned (ea.mem.seg, ea.mem.off, ea.bytes, ctxt, ops), -EXC_GP ,0 ); + TRAP_gp_fault,0 );if ( !(b &1 ) ) rc = ops->read (ea.mem.seg, ea.mem.off+0 , mmvalp, ea.bytes, ctxt);
@@ -5133,7 +5112,7 @@ x86_emulate(case X86EMUL_OPC (0x0f ,0x21 ):/* mov dr,reg */ case X86EMUL_OPC (0x0f ,0x22 ):/* mov reg,cr */ case X86EMUL_OPC (0x0f ,0x23 ):/* mov reg,dr */ -generate_exception_if (!mode_ring0 (),EXC_GP ,0 ); +generate_exception_if (!mode_ring0 (), TRAP_gp_fault,0 );if ( b &2 ) {/* Write to CR/DR. */
@@ -5156,7 +5135,7 @@ x86_emulate(break ;case X86EMUL_OPC (0x0f ,0x30 ):/* wrmsr */ -generate_exception_if (!mode_ring0 (),EXC_GP ,0 ); +generate_exception_if (!mode_ring0 (), TRAP_gp_fault,0 );fail_if (ops->write_msr ==NULL ); if ( (rc = ops->write_msr(_regs._ecx, ((uint64_t)_regs.r(dx) << 32) | _regs._eax,
@@ -5172,7 +5151,7 @@ x86_emulate(fail_if (ops->read_cr ==NULL );if ( (rc = ops->read_cr (4 , &cr4, ctxt)) ) goto done; -generate_exception_if (cr4 &X86_CR4_TSD ,EXC_GP ,0 ); +generate_exception_if (cr4 &X86_CR4_TSD , TRAP_gp_fault,0 ); }fail_if (ops->read_msr ==NULL );if ( (rc = ops->read_msr (MSR_IA32_TSC , &val, ctxt)) !=0 )
@@ -5184,7 +5163,7 @@ x86_emulate(case X86EMUL_OPC (0x0f ,0x32 ):/* rdmsr */ {uint64_t val; -generate_exception_if (!mode_ring0 (),EXC_GP ,0 ); +generate_exception_if (!mode_ring0 (), TRAP_gp_fault,0 );fail_if (ops->read_msr ==NULL );if ( (rc = ops->read_msr (_regs._ecx, &val, ctxt)) !=0 ) goto done;
@@ -5204,15 +5183,15 @@ x86_emulate(int lm;vcpu_must_have (sep); -generate_exception_if (mode_ring0 (),EXC_GP ,0 ); -generate_exception_if (!in_protmode (ctxt, ops),EXC_GP ,0 ); +generate_exception_if (mode_ring0 (), TRAP_gp_fault,0 ); +generate_exception_if (!in_protmode (ctxt, ops), TRAP_gp_fault,0 );fail_if (ops->read_msr ==NULL );if ( (rc = ops->read_msr (MSR_IA32_SYSENTER_CS , &msr_content, ctxt)) !=0 ) goto done; -generate_exception_if (!(msr_content &0xfffc ),EXC_GP ,0 ); +generate_exception_if (!(msr_content &0xfffc ), TRAP_gp_fault,0 ); lm =in_longmode (ctxt, ops);if ( lm <0 ) goto cannot_emulate;
@@ -5254,19 +5233,19 @@ x86_emulate(uint64_t msr_content;vcpu_must_have (sep); -generate_exception_if (!mode_ring0 (),EXC_GP ,0 ); -generate_exception_if (!in_protmode (ctxt, ops),EXC_GP ,0 ); +generate_exception_if (!mode_ring0 (), TRAP_gp_fault,0 ); +generate_exception_if (!in_protmode (ctxt, ops), TRAP_gp_fault,0 );fail_if (ops->read_msr ==NULL );if ( (rc = ops->read_msr (MSR_IA32_SYSENTER_CS , &msr_content, ctxt)) !=0 ) goto done; -generate_exception_if (!(msr_content &0xfffc ),EXC_GP ,0 ); +generate_exception_if (!(msr_content &0xfffc ), TRAP_gp_fault,0 );generate_exception_if (op_bytes ==8 && (!is_canonical_address (_regs.r (dx)) || !is_canonical_address (_regs.r (cx))), -EXC_GP ,0 ); + TRAP_gp_fault,0 ); cs.sel = (msr_content |3 ) +/* SELECTOR_RPL_MASK */ (op_bytes ==8 ?32 :16 );
@@ -5364,11 +5343,11 @@ x86_emulate(switch ( b ) {case 0x7e : -generate_exception_if (vex.l,EXC_UD ); +generate_exception_if (vex.l, TRAP_invalid_op); ea.bytes = op_bytes;break ;case 0xd6 : -generate_exception_if (vex.l,EXC_UD ); +generate_exception_if (vex.l, TRAP_invalid_op); ea.bytes =8 ;break ; }
@@ -5383,7 +5362,7 @@ x86_emulate(generate_exception_if (!(mxcsr &MXCSR_MM ) && !is_aligned (ea.mem.seg, ea.mem.off, ea.bytes, ctxt, ops), -EXC_GP ,0 ); + TRAP_gp_fault,0 );if ( b ==0x6f ) rc = ops->read (ea.mem.seg, ea.mem.off+0 , mmvalp, ea.bytes, ctxt);
@@ -5435,7 +5414,7 @@ x86_emulate(fail_if (ops->cpuid ==NULL ); rc = ops->cpuid (_regs._eax, _regs._ecx, &cpuid_leaf, ctxt);generate_exception_if (rc ==X86EMUL_EXCEPTION , -EXC_GP ,0 );/* CPUID Faulting? */ + TRAP_gp_fault,0 );/* CPUID Faulting? */ if ( rc !=X86EMUL_OKAY ) goto done; _regs.r (ax) = cpuid_leaf.a;
@@ -5445,7 +5424,7 @@ x86_emulate(break ;case X86EMUL_OPC (0x0f ,0xa3 ): bt:/* bt */ -generate_exception_if (lock_prefix,EXC_UD ); +generate_exception_if (lock_prefix, TRAP_invalid_op);emulate_2op_SrcV_nobyte ("bt" , src, dst, _regs._eflags); dst.type =OP_NONE ;break ;
@@ -5456,7 +5435,7 @@ x86_emulate(case X86EMUL_OPC (0x0f ,0xad ):/* shrd %%cl,r,r/m */ {uint8_t shift, width = dst.bytes <<3 ; -generate_exception_if (lock_prefix,EXC_UD ); +generate_exception_if (lock_prefix, TRAP_invalid_op);if ( b &1 ) shift = _regs.cl;else
@@ -5498,14 +5477,14 @@ x86_emulate( {case 5 :/* lfence */ fail_if (modrm_mod !=3 ); -generate_exception_if (vex.pfx,EXC_UD ); +generate_exception_if (vex.pfx, TRAP_invalid_op);vcpu_must_have (sse2); asmvolatile ("lfence" :::"memory" );break ;case 6 :if ( modrm_mod ==3 )/* mfence */ { -generate_exception_if (vex.pfx,EXC_UD ); +generate_exception_if (vex.pfx, TRAP_invalid_op);vcpu_must_have (sse2); asmvolatile ("mfence" :::"memory" );break ;
@@ -5520,7 +5499,7 @@ x86_emulate(case 7 :if ( modrm_mod ==3 )/* sfence */ { -generate_exception_if (vex.pfx,EXC_UD ); +generate_exception_if (vex.pfx, TRAP_invalid_op);vcpu_must_have (sse); asmvolatile ("sfence" :::"memory" );break ;
@@ -5541,11 +5520,11 @@ x86_emulate(case X86EMUL_OPC_F3 (0x0f ,0xae ):/* Grp15 */ fail_if (modrm_mod !=3 ); -generate_exception_if ((modrm_reg &4 ) || !mode_64bit (),EXC_UD ); +generate_exception_if ((modrm_reg &4 ) || !mode_64bit (), TRAP_invalid_op);fail_if (!ops->read_cr);if ( (rc = ops->read_cr (4 , &cr4, ctxt)) !=X86EMUL_OKAY ) goto done; -generate_exception_if (!(cr4 &X86_CR4_FSGSBASE ),EXC_UD ); +generate_exception_if (!(cr4 &X86_CR4_FSGSBASE ), TRAP_invalid_op); seg = modrm_reg &1 ? x86_seg_gs : x86_seg_fs;fail_if (!ops->read_segment);if ( (rc = ops->read_segment (seg, &sreg, ctxt)) !=X86EMUL_OKAY )
@@ -5565,7 +5544,7 @@ x86_emulate( { sreg.base = *dst.reg;generate_exception_if (!is_canonical_address (sreg.base), -EXC_GP ,0 ); + TRAP_gp_fault,0 ); } else sreg.base = (uint32_t)*dst.reg;
@@ -5634,7 +5613,7 @@ x86_emulate(case 5 : goto bts;case 6 : goto btr;case 7 : goto btc; -default :generate_exception (EXC_UD ); +default :generate_exception (TRAP_invalid_op); }break ;
@@ -5746,7 +5725,7 @@ x86_emulate(#ifdef HAVE_GAS_RDRAND case 6 :/* rdrand */ -generate_exception_if (rep_prefix (),EXC_UD ); +generate_exception_if (rep_prefix (), TRAP_invalid_op);host_and_vcpu_must_have (rdrand); dst = ea; switch ( op_bytes )
@@ -5777,7 +5756,7 @@ x86_emulate( { uint64_t tsc_aux; - generate_exception_if(ea.type != OP_REG, EXC_UD); + generate_exception_if(ea.type != OP_REG, TRAP_invalid_op); vcpu_must_have(rdpid); fail_if(!ops->read_msr); if ( (rc = ops->read_msr(MSR_TSC_AUX, &tsc_aux,
@@ -5789,7 +5768,7 @@ x86_emulate(break ; }#ifdef HAVE_GAS_RDSEED -generate_exception_if (rep_prefix (),EXC_UD ); +generate_exception_if (rep_prefix (), TRAP_invalid_op);host_and_vcpu_must_have (rdseed); dst = ea; switch ( op_bytes )
@@ -5819,14 +5798,14 @@ x86_emulate( }/* cmpxchg8b/cmpxchg16b */ -generate_exception_if ((modrm_reg &7 ) !=1 ,EXC_UD ); +generate_exception_if ((modrm_reg &7 ) !=1 , TRAP_invalid_op);fail_if (!ops->cmpxchg);if ( rex_prefix &REX_W ) {host_and_vcpu_must_have (cx16);generate_exception_if (!is_aligned (ea.mem.seg, ea.mem.off,16 , ctxt, ops), -EXC_GP ,0 ); + TRAP_gp_fault,0 ); op_bytes =16 ; }else
@@ -5976,7 +5955,7 @@ x86_emulate(host_and_vcpu_must_have (bmi2); elsehost_and_vcpu_must_have (bmi1 ); -generate_exception_if (vex.l,EXC_UD ); +generate_exception_if (vex.l, TRAP_invalid_op); buf[0 ] =0xc4 ; *pvex = vex;
@@ -6010,7 +5989,7 @@ x86_emulate( goto cannot_emulate; } -generate_exception_if (vex.l,EXC_UD ); +generate_exception_if (vex.l, TRAP_invalid_op); buf[0 ] =0xc4 ; *pvex = vex;
@@ -6063,7 +6042,7 @@ x86_emulate(case X86EMUL_OPC_VEX_F2 (0x0f38 ,0xf6 ):/* mulx r/m,r,r */ vcpu_must_have (bmi2); -generate_exception_if (vex.l,EXC_UD ); +generate_exception_if (vex.l, TRAP_invalid_op); ea.reg =decode_vex_gpr (vex.reg, &_regs, ctxt);if (mode_64bit () && vex.w ) asm ( "mulq %3" : "=a" (*ea.reg), "=d" (dst.val)
@@ -6075,7 +6054,7 @@ x86_emulate(case X86EMUL_OPC_VEX_F2 (0x0f3a ,0xf0 ):/* rorx imm,r/m,r */ vcpu_must_have (bmi2); -generate_exception_if (vex.l || vex.reg !=0xf ,EXC_UD ); +generate_exception_if (vex.l || vex.reg !=0xf , TRAP_invalid_op);if ( ea.type ==OP_REG ) src.val = *ea.reg; else if ( (rc = read_ulong(ea.mem.seg, ea.mem.off, &src.val, op_bytes,
@@ -6108,7 +6087,7 @@ x86_emulate(uint8_t *buf =get_stub (stub);typeof (vex) *pxop =container_of (buf +1 ,typeof (vex), raw[0 ]); -generate_exception_if (vex.l,EXC_UD ); +generate_exception_if (vex.l, TRAP_invalid_op); buf[0 ] =0x8f ; *pxop = vex;
@@ -6142,7 +6121,7 @@ x86_emulate(typeof (vex) *pxop =container_of (buf +1 ,typeof (vex), raw[0 ]);host_and_vcpu_must_have (tbm); -generate_exception_if (vex.l || vex.reg !=0xf ,EXC_UD ); +generate_exception_if (vex.l || vex.reg !=0xf , TRAP_invalid_op);if ( ea.type ==OP_REG ) src.val = *ea.reg;
Signature · 7 lines
2.11.0 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xen.org/xen-devel
Re: [PATCH v2 09/12] x86emul: use TRAP definitions in x86-defns.h
Quoted 31 lines · Wei Liu
And remove duplicates.
No functional change.
Signed-off-by Wei Liu <[email protected]>---
Cc: Jan Beulich <[email protected]>
Cc: Andrew Cooper <[email protected]>--- xen/arch/x86/x86_emulate/x86_emulate.c | 305 +++++++++++++++------------------ 1 file changed, 142 insertions(+), 163 deletions(-)xen/arch/x86/x86_emulate/x86_emulate.c +0
-11@@ -421,27 +421,6 @@ typedef union {/* MXCSR bit definitions. */ #define MXCSR_MM (1U << 17) -/* Exception definitions. */ -#define EXC_DE 0 -#define EXC_DB 1 -#define EXC_BP 3 -#define EXC_OF 4 -#define EXC_BR 5 -#define EXC_UD 6 -#define EXC_NM 7 -#define EXC_DF 8 -#define EXC_TS 10 -#define EXC_NP 11
xen/arch/x86/x86_emulate/x86_emulate.c typedef union { · line 444
Quoted 10 lines
xen/arch/x86/x86_emulate/x86_emulate.c +0
-10-#define EXC_SS 12 -#define EXC_GP 13 -#define EXC_PF 14 -#define EXC_MF 16 -#define EXC_AC 17 -#define EXC_XM 19 - -#define EXC_HAS_EC \ - ((1u << EXC_DF) | (1u << EXC_TS) | (1u << EXC_NP) | \ - (1u << EXC_SS) | (1u << EXC_GP) | (1u << EXC_PF) | (1u << EXC_AC))
Most of the changes are fine, but this one I was planning to do the other way round. X86_EXC_xx is a more concise representation, more accurately named (i.e. without 'trap') and matches the terminology used in the Intel and AMD manuals.
IMO it would be fine to have duplicate names in x86-defs.h for a transition period.
~Andrew
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
PATCH v2 10/12 fuzz/x86emul: update fuzzer
In reply to Wei LiuProvide the fuzzer with more ops, and more sophisticated input structure.
Based on a patch originally written by Andrew and George.
---
Cc: Ian Jackson <[email protected]>
Cc: Jan Beulich <[email protected]>
Cc: Andrew Cooper <[email protected]>
Cc: George Dunlap <[email protected]>
v2:
1. Address comments from Jan.
2. Provide architecturally correct behaviour for rep stub.
--- .../x86-insn-emulator-fuzzer.c | 660 +++++++++++++++++++-- 1 file changed, 598 insertions(+), 62 deletions(-)
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +598 -62
@@ -4,6 +4,7 @@#include <inttypes.h> #include <limits.h> #include <stdbool.h> +#include <stddef.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h>
@@ -16,26 +17,79 @@#include "x86_emulate.h" -static unsigned char data[4096 ]; +#include "../../../xen/include/asm-x86/msr-index.h" + +#define MSR_INDEX_MAX 16 + +#define SEG_NUM x86_seg_none + +struct input_struct { +unsigned long cr[5 ]; +uint64_t msr[MSR_INDEX_MAX ]; +struct cpu_user_regs regs; +struct segment_register segments[SEG_NUM ]; +unsigned long options; +unsigned char data[4096 ]; +} input; +#define DATA_OFFSET offsetof(struct input_struct, data)static unsigned int data_index; -static unsigned int data_max; +static unsigned int data_num; + +/* Randomly return success or failure when processing data. If +* `exception` is false, this function turns _EXCEPTION to _OKAY. +*/ +int maybe_fail (const char *why,bool exception) +{ +int rc; + +if ( data_index +1 > data_num ) + rc =X86EMUL_EXCEPTION ; +else + { +/* Randomly returns value: +* 50% okay +* 25% unhandlable +* 25% exception +*/ +if ( input.data[data_index] >0xc0 ) + rc =X86EMUL_EXCEPTION ; +else if ( input.data[data_index] >0x80 ) + rc =X86EMUL_UNHANDLEABLE ; +else + rc =X86EMUL_OKAY ; + data_index++; + } + +if ( rc ==X86EMUL_EXCEPTION && !exception ) + rc =X86EMUL_OKAY ; + +printf ("maybe_fail %s: %d\n" , why, rc); + +return rc; +}static int data_read (const char *why,void *dst,unsigned int bytes) {unsigned int i; +int rc; -if ( data_index + bytes > data_max ) -return X86EMUL_EXCEPTION ; +if ( data_index + bytes > data_num ) + rc =X86EMUL_EXCEPTION ; +else + rc =maybe_fail (why, true); -memcpy (dst, data + data_index, bytes); - data_index += bytes; +if ( rc ==X86EMUL_OKAY ) + { +memcpy (dst, input.data + data_index, bytes); + data_index += bytes; -printf ("%s: " , why); -for ( i =0 ; i < bytes; i++ ) -printf (" %02x" , *(unsigned char *)(dst + i)); -printf ("\n" ); +printf ("%s: " , why); +for ( i =0 ; i < bytes; i++ ) +printf (" %02x" , *(unsigned char *)(dst + i)); +printf ("\n" ); + } -return X86EMUL_OKAY ; +return rc; } static int fuzz_read(
@@ -48,14 +102,96 @@ static int fuzz_read(return data_read ("read" , p_data, bytes); } -static int fuzz_fetch ( +static int fuzz_read_io ( +unsigned int port, +unsigned int bytes, +unsigned long *val, +struct x86_emulate_ctxt *ctxt) +{ +return data_read ("read_io" , val, bytes); +} + +static int fuzz_insn_fetch (unsigned int seg,unsigned long offset,void *p_data,unsigned int bytes,struct x86_emulate_ctxt *ctxt) { -return data_read ("fetch" , p_data, bytes); +return data_read ("insn_fetch" , p_data, bytes); +} + +static int _fuzz_rep_read (const char *why,unsigned long *reps) +{ +int rc; +unsigned long bytes_read =0 ; + + rc =data_read (why, &bytes_read,sizeof (bytes_read)); + +if ( bytes_read < *reps ) + *reps -= bytes_read; + +/* Indicate we haven't done any work if emulation has failed */ +if ( rc !=X86EMUL_OKAY ) + *reps =0 ; + +return rc; +} + +static int _fuzz_rep_write (const char *why,unsigned long *reps) +{ +int rc =maybe_fail (why, true); + +/* Indicate we haven't done any work if emulation has failed */ +if ( rc !=X86EMUL_OKAY ) + *reps =0 ; + +return rc; +} + +static int fuzz_rep_ins ( +uint16_t src_port, +enum x86_segment dst_seg, +unsigned long dst_offset, +unsigned int bytes_per_rep, +unsigned long *reps, +struct x86_emulate_ctxt *ctxt) +{ +return _fuzz_rep_read ("rep_in" , reps); +} + +static int fuzz_rep_movs ( +enum x86_segment src_seg, +unsigned long src_offset, +enum x86_segment dst_seg, +unsigned long dst_offset, +unsigned int bytes_per_rep, +unsigned long *reps, +struct x86_emulate_ctxt *ctxt) +{ +return _fuzz_rep_read ("rep_movs" , reps); +} + +static int fuzz_rep_outs ( +enum x86_segment src_seg, +unsigned long src_offset, +uint16_t dst_port, +unsigned int bytes_per_rep, +unsigned long *reps, +struct x86_emulate_ctxt *ctxt) +{ +return _fuzz_rep_write ("rep_outs" , reps); +} + +static int fuzz_rep_stos ( +void *p_data, +enum x86_segment seg, +unsigned long offset, +unsigned int bytes_per_rep, +unsigned long *reps, +struct x86_emulate_ctxt *ctxt) +{ +return _fuzz_rep_write ("rep_stos" , reps); } static int fuzz_write(
@@ -65,7 +201,7 @@ static int fuzz_write(unsigned int bytes, struct x86_emulate_ctxt *ctxt) { - return X86EMUL_OKAY; + return maybe_fail("write", true); } static int fuzz_cmpxchg(
@@ -76,18 +212,294 @@ static int fuzz_cmpxchg(unsigned int bytes, struct x86_emulate_ctxt *ctxt) { - return X86EMUL_OKAY; + return maybe_fail("cmpxchg", true); +} + +static int fuzz_invlpg ( +enum x86_segment seg, +unsigned long offset, +struct x86_emulate_ctxt *ctxt) +{ +return maybe_fail ("invlpg" , false); +} + +static int fuzz_wbinvd ( +struct x86_emulate_ctxt *ctxt) +{ +return maybe_fail ("wbinvd" , true); +} + +static int fuzz_write_io ( +unsigned int port, +unsigned int bytes, +unsigned long val, +struct x86_emulate_ctxt *ctxt) +{ +return maybe_fail ("write_io" , true); +} + +static int fuzz_cpuid ( +uint32_t leaf, +uint32_t subleaf, +struct cpuid_leaf *res, +struct x86_emulate_ctxt *ctxt) +{ +return emul_test_cpuid (leaf, subleaf, res, ctxt); +} + +static int fuzz_read_segment ( +enum x86_segment seg, +struct segment_register *reg, +struct x86_emulate_ctxt *ctxt) +{ +int rc; + +if ( seg >SEG_NUM ) +return X86EMUL_UNHANDLEABLE ; + + rc =maybe_fail ("read_segment" , true); + +if ( rc ==X86EMUL_OKAY ) +memcpy (reg, input.segments+seg,sizeof (struct segment_register )); + +return rc; +} + +static int fuzz_write_segment ( +enum x86_segment seg, +const struct segment_register *reg, +struct x86_emulate_ctxt *ctxt) +{ +int rc; + +if ( seg >SEG_NUM ) +return X86EMUL_UNHANDLEABLE ; + + rc =maybe_fail ("write_segment" , true); + +if ( rc ==X86EMUL_OKAY ) +memcpy (input.segments+seg, reg,sizeof (struct segment_register )); + +return rc; +} + +static int fuzz_read_cr ( +unsigned int reg, +unsigned long *val, +struct x86_emulate_ctxt *ctxt) +{ +int rc; + +if ( reg >ARRAY_SIZE (input.cr) ) +return X86EMUL_UNHANDLEABLE ; + + rc =maybe_fail ("read_cr" , true); + +if ( rc ==X86EMUL_OKAY ) + *val = input.cr[reg]; + +return rc; +} + +static int fuzz_write_cr ( +unsigned int reg, +unsigned long val, +struct x86_emulate_ctxt *ctxt) +{ +int rc; + +if ( reg >ARRAY_SIZE (input.cr) ) +return X86EMUL_UNHANDLEABLE ; + + rc =maybe_fail ("write_cr" , true); + +if ( rc ==X86EMUL_OKAY ) + input.cr[reg] = val; + +return rc; +} + +enum { +MSRI_IA32_SYSENTER_CS , +MSRI_IA32_SYSENTER_ESP , +MSRI_IA32_SYSENTER_EIP , +MSRI_EFER , +MSRI_STAR , +MSRI_LSTAR , +MSRI_CSTAR , +MSRI_SYSCALL_MASK +}; + +const static unsigned int msr_index[MSR_INDEX_MAX ] = { + [MSRI_IA32_SYSENTER_CS ] =MSR_IA32_SYSENTER_CS , + [MSRI_IA32_SYSENTER_ESP ] =MSR_IA32_SYSENTER_ESP , + [MSRI_IA32_SYSENTER_EIP ] =MSR_IA32_SYSENTER_EIP , + [MSRI_EFER ] =MSR_EFER , + [MSRI_STAR ] =MSR_STAR , + [MSRI_LSTAR ] =MSR_LSTAR , + [MSRI_CSTAR ] =MSR_CSTAR , + [MSRI_SYSCALL_MASK ] =MSR_SYSCALL_MASK +}; + +static int _fuzz_read_msr ( +unsigned int reg, +uint64_t *val, +struct x86_emulate_ctxt *ctxt) +{ +unsigned int idx; + +switch ( reg ) + { +case MSR_TSC_AUX : +case MSR_IA32_TSC : +return data_read ("read_msr" , val,sizeof (*val)); +case MSR_EFER : + *val = input.msr[MSRI_EFER ]; + *val &= ~EFER_LMA ; +if ( (*val &EFER_LME ) && (input.cr[4 ] &X86_CR4_PAE ) && + (input.cr[0 ] &X86_CR0_PG ) ) + { +printf ("Setting EFER_LMA\n" ); + *val |=EFER_LMA ; + } +return X86EMUL_OKAY ; + } + +for ( idx =0 ; idx <MSR_INDEX_MAX ; idx++ ) + { +if ( msr_index[idx] == reg ) + { + *val = input.msr[idx]; +return X86EMUL_OKAY ; + } + } + +return X86EMUL_EXCEPTION ; +} + +static int fuzz_read_msr ( +unsigned int reg, +uint64_t *val, +struct x86_emulate_ctxt *ctxt) { +int rc; + + rc =maybe_fail ("read_msr" , true); +if ( rc !=X86EMUL_OKAY ) +return rc; +else +return _fuzz_read_msr (reg, val, ctxt); +} + +static int fuzz_write_msr ( +unsigned int reg, +uint64_t val, +struct x86_emulate_ctxt *ctxt) +{ +unsigned int idx; +int rc; + + rc =maybe_fail ("write_ms" , true); +if ( rc !=X86EMUL_OKAY ) +return rc; + +switch ( reg ) + { +case MSR_TSC_AUX : +case MSR_IA32_TSC : +return X86EMUL_OKAY ; + } + +for ( idx =0 ; idx <MSR_INDEX_MAX ; idx++ ) + { +if ( msr_index[idx] == reg ) + { + input.msr[idx] = val; +return X86EMUL_OKAY ; + } + } + +return X86EMUL_EXCEPTION ; } +#define SET (h) .h = fuzz_##hstatic struct x86_emulate_ops fuzz_emulops = { - .read = fuzz_read, - .insn_fetch = fuzz_fetch, - .write = fuzz_write, - .cmpxchg = fuzz_cmpxchg, - .cpuid = emul_test_cpuid, - .read_cr = emul_test_read_cr, +SET (read), +SET (insn_fetch), +SET (write), +SET (cmpxchg), +SET (rep_ins), +SET (rep_outs), +SET (rep_movs), +SET (rep_stos), +SET (read_segment), +SET (write_segment), +SET (read_io), +SET (write_io), +SET (read_cr), +SET (write_cr), +SET (read_msr), +SET (write_msr), +SET (wbinvd), +SET (cpuid), +SET (invlpg), .get_fpu = emul_test_get_fpu, }; +#undef SET + +static void setup_fpu_exception_handler (void ) +{ +/* FIXME - just disable exceptions for now */ +unsigned long a; + + asmvolatile ("fnclex" ); + a=0x37f ;/* FCW_DEFAULT in Xen */ + asmvolatile ("fldcw %0" ::"m" (a)); + a=0x1f80 ;/* MXCSR_DEFAULT in Xen */ + asmvolatile ("ldmxcsr %0" ::"m" (a) ); +} + +static void dump_state (struct x86_emulate_ctxt *ctxt) +{ +struct cpu_user_regs *regs = ctxt->regs; +uint64_t val; + +printf (" -- State -- \n" ); +printf ("addr / sp size: %d / %d\n" , ctxt->addr_size, ctxt->sp_size); +printf (" cr0: %lx\n" , input.cr[0 ]); +printf (" cr3: %lx\n" , input.cr[3 ]); +printf (" cr4: %lx\n" , input.cr[4 ]); + +printf (" rip: %" PRIx64"\n" , regs->rip); + +_fuzz_read_msr (MSR_EFER , &val, ctxt); +printf ("EFER: %" PRIx64"\n" , val); +} + +static bool long_mode_active (struct x86_emulate_ctxt *ctxt) +{ +uint64_t val; + +if (_fuzz_read_msr (MSR_EFER , &val, ctxt) !=X86EMUL_OKAY ) +return false; + +return val &EFER_LMA ; +} + +static bool in_longmode (struct x86_emulate_ctxt *ctxt) +{ +return long_mode_active (ctxt) && input.segments[x86_seg_cs].attr.fields.l; +} + +static void set_sizes (struct x86_emulate_ctxt *ctxt) +{ +if (in_longmode (ctxt) ) + ctxt->addr_size = ctxt->sp_size =64 ; +else + { + ctxt->addr_size = input.segments[x86_seg_cs].attr.fields.db ?32 :16 ; + ctxt->sp_size = input.segments[x86_seg_ss].attr.fields.db ?32 :16 ; + } +}#define CANONICALIZE (x) \ do { \
@@ -100,10 +512,150 @@ static struct x86_emulate_ops fuzz_emulops = { (x) = _y; \ }while (0 ) -#define ADDR_SIZE_SHIFT 60 -#define ADDR_SIZE_64 (2ULL << ADDR_SIZE_SHIFT) -#define ADDR_SIZE_32 (1ULL << ADDR_SIZE_SHIFT) -#define ADDR_SIZE_16 (0) +/* Expects bitmap and regs to be defined */ +#define CANONICALIZE_MAYBE (reg) \ + if ( !(bitmap & (1 << CANONICALIZE_##reg)) ) \ + CANONICALIZE(regs->reg); \ + +enum { + HOOK_read, + HOOK_insn_fetch, + HOOK_write, + HOOK_cmpxchg, + HOOK_rep_ins, + HOOK_rep_outs, + HOOK_rep_movs, + HOOK_rep_stos, + HOOK_read_segment, + HOOK_write_segment, + HOOK_read_io, + HOOK_write_io, + HOOK_read_cr, + HOOK_write_cr, + HOOK_read_dr, + HOOK_write_dr, + HOOK_read_msr, + HOOK_write_msr, + HOOK_wbinvd, + HOOK_cpuid, + HOOK_inject_hw_exception, + HOOK_inject_sw_interrupt, + HOOK_get_fpu, + HOOK_put_fpu, + HOOK_invlpg, + HOOK_vmfunc, + OPTION_swint_emulation,/* Two bits */ + CANONICALIZE_rip = OPTION_swint_emulation +2 , + CANONICALIZE_rsp, + CANONICALIZE_rbp +}; + +/* Expects bitmap to be defined */ +#define MAYBE_DISABLE_HOOK (h) \ + if ( bitmap & (1 << HOOK_##h) ) \ + { \ + fuzz_emulops.h = NULL; \ + printf("Disabling hook "#h"\n"); \ + } + +static void disable_hooks (void ) +{ +unsigned long bitmap = input.options; + +/* See also sanitize_input, some hooks can't be disabled. */ +MAYBE_DISABLE_HOOK (read); +MAYBE_DISABLE_HOOK (insn_fetch); +MAYBE_DISABLE_HOOK (write); +MAYBE_DISABLE_HOOK (cmpxchg); +MAYBE_DISABLE_HOOK (rep_ins); +MAYBE_DISABLE_HOOK (rep_outs); +MAYBE_DISABLE_HOOK (rep_movs); +MAYBE_DISABLE_HOOK (rep_stos); +MAYBE_DISABLE_HOOK (read_segment); +MAYBE_DISABLE_HOOK (write_segment); +MAYBE_DISABLE_HOOK (read_io); +MAYBE_DISABLE_HOOK (write_io); +MAYBE_DISABLE_HOOK (read_cr); +MAYBE_DISABLE_HOOK (write_cr); +MAYBE_DISABLE_HOOK (read_msr); +MAYBE_DISABLE_HOOK (write_msr); +MAYBE_DISABLE_HOOK (wbinvd); +MAYBE_DISABLE_HOOK (cpuid); +MAYBE_DISABLE_HOOK (get_fpu); +MAYBE_DISABLE_HOOK (invlpg); +} + +static void set_swint_support (struct x86_emulate_ctxt *ctxt) +{ +unsigned int swint_opt = (input.options >> OPTION_swint_emulation) &3 ; + +static const enum x86_swint_emulation map[4 ] = { + x86_swint_emulate_none, + x86_swint_emulate_none, + x86_swint_emulate_icebp, + x86_swint_emulate_all }; + + ctxt->swint_emulate = map[swint_opt]; +} + +/* +* Constrain input to architecturally-possible states where +* the emulator relies on these +* +* In general we want the emulator to be as absolutely robust as +* possible; which means that we want to minimize the number of things +* it assumes about the input state. Tesing this means minimizing and +* removing as much of the input constraints as possible. +* +* So we only add constraints that (in general) have been proven to +* cause crashes in the emulator. +* +* For future reference: other constraints which might be necessary at +* some point: +* +* - EFER.LMA => !EFLAGS.NT +* - In VM86 mode (and real mode?), force segment... +* - ...access rights to 0xf3 +* - ...limits to 0xffff +* - ...bases to below 1Mb, 16-byte aligned +* - ...selectors to (base >> 4) +*/ +void sanitize_input (struct x86_emulate_ctxt *ctxt) { +struct cpu_user_regs *regs = &input.regs; +unsigned long bitmap = input.options; + +/* Some hooks can't be disabled. */ + input.options &= ~((1 <<HOOK_read)|(1 <<HOOK_insn_fetch)); + +/* Zero 'private' entries */ + regs->error_code =0 ; + regs->entry_vector =0 ; + +CANONICALIZE_MAYBE (rip); +CANONICALIZE_MAYBE (rsp); +CANONICALIZE_MAYBE (rbp); + +/* +* CR0.PG can't be set if CR0.PE isn't set. Set is more interesting, so +* set PE if PG is set. +*/ +if ( input.cr[0 ] &X86_CR0_PG ) + input.cr[0 ] |=X86_CR0_PE ; + +/* +* EFLAGS.VM not available in long mode +*/ +if (long_mode_active (ctxt) ) + regs->rflags &= ~X86_EFLAGS_VM ; + +/* +* EFLAGS.VM implies 16-bit mode +*/ +if ( regs->rflags &X86_EFLAGS_VM ) { + input.segments[x86_seg_cs].attr.fields.db =0 ; + input.segments[x86_seg_ss].attr.fields.db =0 ; + } +}int LLVMFuzzerTestOneInput (const uint8_t *data_p,size_t size) {
@@ -114,10 +666,7 @@ int LLVMFuzzerTestOneInput(const uint8_t *data_p, size_t size) .addr_size = 8 * sizeof(void *), .sp_size = 8 * sizeof(void *), }; -unsigned int nr =0 ;int rc; -unsigned int x; -const uint8_t *p = data_p; stack_exec =emul_test_make_stack_executable ();if ( !stack_exec )
@@ -127,52 +676,39 @@ int LLVMFuzzerTestOneInput(const uint8_t *data_p, size_t size) }/* Reset all global state variables */ -memset (data,0 ,sizeof (data)); +memset (&input,0 ,sizeof (input)); data_index =0 ; - data_max =0 ; - - nr = size <sizeof (regs) ? size :sizeof (regs); + data_num =0 ; -memcpy (®s, p, nr); - p +=sizeof (regs); +if ( size <=DATA_OFFSET ) + { +printf ("Input too small\n" ); +return 1 ; + } -if ( nr < size ) +if ( size >sizeof (input) ) { -memcpy (data, p, size - nr); - data_max = size - nr; +printf ("Input too large\n" ); +return 1 ; } - ctxt.force_writeback = false; +memcpy (&input, data_p, size); -/* Zero 'private' fields */ - regs.error_code =0 ; - regs.entry_vector =0 ; + data_num = size -DATA_OFFSET ; -/* Use the upper bits of regs.eip to determine addr_size */ - x = (regs.rip >>ADDR_SIZE_SHIFT ) &0x3 ; -if ( x ==3 ) - x =2 ; - ctxt.addr_size =16 << x; -printf ("addr_size: %d\n" , ctxt.addr_size); +sanitize_input (&ctxt); -/* Use the upper bit of regs.rsp to determine sp_size (if appropriate) */ -if ( ctxt.addr_size ==64 ) - ctxt.sp_size =64 ; -else - { -/* If addr_size isn't 64-bits, sp_size can only be 16 or 32 bits */ - x = (regs.rsp >>ADDR_SIZE_SHIFT ) &0x1 ; - ctxt.sp_size =16 << x; - } -printf ("sp_size: %d\n" , ctxt.sp_size); -CANONICALIZE (regs.rip); -CANONICALIZE (regs.rsp); -CANONICALIZE (regs.rbp); +disable_hooks (); -/* Zero all segments for now */ - regs.cs = regs.ss = regs.es = regs.ds = regs.fs = regs.gs =0 ; +set_swint_support (&ctxt);do { +/* FIXME: Until we actually implement SIGFPE handling properly */ +setup_fpu_exception_handler (); + +set_sizes (&ctxt); +dump_state (&ctxt); + rc =x86_emulate (&ctxt, &fuzz_emulops);printf ("Emulation result: %d\n" , rc); }while ( rc ==X86EMUL_OKAY );
Signature · 7 lines
2.11.0 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xen.org/xen-devel
Re: [PATCH v2 10/12] fuzz/x86emul: update fuzzer
Quoted 18 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +12
-1@@ -16,26 +17,79 @@#include "x86_emulate.h" -static unsigned char data[4096 ]; +#include "../../../xen/include/asm-x86/msr-index.h" + +#define MSR_INDEX_MAX 16 + +#define SEG_NUM x86_seg_none + +struct input_struct { +unsigned long cr[5 ]; +uint64_t msr[MSR_INDEX_MAX ]; +struct cpu_user_regs regs; +struct segment_register segments[SEG_NUM ]; +unsigned long options;
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c line 40
Quoted 10 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +8
-1+unsigned char data[4096 ]; +} input; +#define DATA_OFFSET offsetof(struct input_struct, data)static unsigned int data_index; -static unsigned int data_max; +static unsigned int data_num; + +/* Randomly return success or failure when processing data. If +* `exception` is false, this function turns _EXCEPTION to _OKAY. +*/
I'm not sure what coding style is to apply here, but if I consider this an extension to the insn emulator harness, which in turn is covered by hypervisor style, then the comment here needs /* to go on a separate line.
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c line 45
Quoted 5 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +5
-0+int maybe_fail (const char *why,bool exception) +{ +int rc; + +if ( data_index +1 > data_num )
"data_index >= data_num" would be the more conventional way to express this.
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_read( · line 132
Quoted 9 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +9
-0+static int _fuzz_rep_read (const char *why,unsigned long *reps) +{ +int rc; +unsigned long bytes_read =0 ; + + rc =data_read (why, &bytes_read,sizeof (bytes_read)); + +if ( bytes_read < *reps ) + *reps -= bytes_read;
I don't understand this: In the success case, *reps upon return indicates the number of iterations done, not the number of iterations left. So at least the variable naming deserves improvement.
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_read( · line 136
Quoted 3 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +3
-0+/* Indicate we haven't done any work if emulation has failed */ +if ( rc !=X86EMUL_OKAY ) + *reps =0 ;
That'll result in some code paths never taken. I'd suggest clearing to zero only in the UNHANDLEABLE case, and simply halving the amount for EXCEPTION or RETRY (granted the latter can't occur right now), or even using input data too for determining the new value.
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_read( · line 160
Quoted 9 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +9
-0+static int fuzz_rep_ins ( +uint16_t src_port, +enum x86_segment dst_seg, +unsigned long dst_offset, +unsigned int bytes_per_rep, +unsigned long *reps, +struct x86_emulate_ctxt *ctxt) +{ +return _fuzz_rep_read ("rep_in" , reps);
"rep_ins"
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 248
Quoted 8 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +8
-0+static int fuzz_cpuid ( +uint32_t leaf, +uint32_t subleaf, +struct cpuid_leaf *res, +struct x86_emulate_ctxt *ctxt) +{ +return emul_test_cpuid (leaf, subleaf, res, ctxt); +}
I don't think you need this wrapper anymore. For the purpose of SET() below a simple #define will do.
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 258
Quoted 9 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +9
-0+static int fuzz_read_segment ( +enum x86_segment seg, +struct segment_register *reg, +struct x86_emulate_ctxt *ctxt) +{ +int rc; + +if ( seg >SEG_NUM ) +return X86EMUL_UNHANDLEABLE ;
As said before - this wants to be >= (even more so with input.segments only having SEG_NUM elements).
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 263
Quoted 4 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +4
-0+ rc =maybe_fail ("read_segment" , true); + +if ( rc ==X86EMUL_OKAY ) +memcpy (reg, input.segments+seg,sizeof (struct segment_register ));
Please prefer (type safe) structure assignment.
Quoted 14 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +9
-0+static int fuzz_read_cr ( +unsigned int reg, +unsigned long *val, +struct x86_emulate_ctxt *ctxt) +{ +int rc; + +if ( reg >ARRAY_SIZE (input.cr) ) +return X86EMUL_UNHANDLEABLE ;= again.
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +2
-0+enum { +MSRI_IA32_SYSENTER_CS ,
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 333
Quoted 10 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +10
-0+MSRI_IA32_SYSENTER_ESP , +MSRI_IA32_SYSENTER_EIP , +MSRI_EFER , +MSRI_STAR , +MSRI_LSTAR , +MSRI_CSTAR , +MSRI_SYSCALL_MASK +}; + +const static unsigned int msr_index[MSR_INDEX_MAX] = {
Conventionally static comes first (as not being part of the type).
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 389
Quoted 10 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +10
-0+static int fuzz_read_msr ( +unsigned int reg, +uint64_t *val, +struct x86_emulate_ctxt *ctxt) { +int rc; + + rc =maybe_fail ("read_msr" , true); +if ( rc !=X86EMUL_OKAY ) +return rc; +else
No need for "else".
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 459
Quoted 11 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +11
-0+static void setup_fpu_exception_handler (void ) +{ +/* FIXME - just disable exceptions for now */ +unsigned long a; + + asmvolatile ("fnclex" ); + a=0x37f ;/* FCW_DEFAULT in Xen */ + asmvolatile ("fldcw %0" ::"m" (a)); + a=0x1f80 ;/* MXCSR_DEFAULT in Xen */ + asmvolatile ("ldmxcsr %0" ::"m" (a) ); +}
While I see that the FCW value has changed, the strange local variable is still there. If you really want to keep it, please at least add the missing spaces around the = signs. But I'd prefer
asm volatile ( "fldcw %0" :: "m" (0x37f /* FCW_DEFAULT in Xen */));
asm volatile ( "ldmxcsr %0" :: "m" (0x1f80 /* MXCSR_DEFAULT in Xen */) );And then - doesn't the ABI require these settings to be in effect upon program startup anyway?
Quoted 9 lines
+/*
+ * Constrain input to architecturally-possible states where
+ * the emulator relies on these
+ *
+ * In general we want the emulator to be as absolutely robust as
+ * possible; which means that we want to minimize the number of things
+ * it assumes about the input state. Tesing this means minimizing and
+ * removing as much of the input constraints as possible.
+ *
Quoted 8 lines
+ * So we only add constraints that (in general) have been proven to
+ * cause crashes in the emulator.
+ *
+ * For future reference: other constraints which might be necessary at
+ * some point:
+ *
+ * - EFER.LMA => !EFLAGS.NT
+ * - In VM86 mode (and real mode?), force segment...
As asked for before - please drop the mentioning of real mode here.
Quoted 21 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +21
-0+void sanitize_input (struct x86_emulate_ctxt *ctxt) { +struct cpu_user_regs *regs = &input.regs; +unsigned long bitmap = input.options; + +/* Some hooks can't be disabled. */ + input.options &= ~((1 <<HOOK_read)|(1 <<HOOK_insn_fetch)); + +/* Zero 'private' entries */ + regs->error_code =0 ; + regs->entry_vector =0 ; + +CANONICALIZE_MAYBE (rip); +CANONICALIZE_MAYBE (rsp); +CANONICALIZE_MAYBE (rbp); + +/* +* CR0.PG can't be set if CR0.PE isn't set. Set is more interesting, so +* set PE if PG is set. +*/ +if ( input.cr[0 ] &X86_CR0_PG ) + input.cr[0 ] |=X86_CR0_PE ;
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static struct x86_emulate_ops fuzz_emulops = { · line 653
Quoted 10 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +10
-0+ +/* +* EFLAGS.VM not available in long mode +*/ +if (long_mode_active (ctxt) ) + regs->rflags &= ~X86_EFLAGS_VM ; + +/* +* EFLAGS.VM implies 16-bit mode +*/
Both of these are single line comments.
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c int LLVMFuzzerTestOneInput(const uint8_t *data_p, size_t size) · line 707
Quoted 3 lines
do {tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +2
-0+/* FIXME: Until we actually implement SIGFPE handling properly */ +setup_fpu_exception_handler ();
I don't think the comment is appropriate here - all that needs fixing is the body of that function (which iirc already has a respective comment).
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
Re: [PATCH v2 10/12] fuzz/x86emul: update fuzzer
Quoted 25 lines · Jan Beulich
Quoted 25 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +17
-2@@ -16,26 +17,79 @@#include "x86_emulate.h" -static unsigned char data[4096 ]; +#include "../../../xen/include/asm-x86/msr-index.h" + +#define MSR_INDEX_MAX 16 + +#define SEG_NUM x86_seg_none + +struct input_struct { +unsigned long cr[5 ]; +uint64_t msr[MSR_INDEX_MAX ]; +struct cpu_user_regs regs; +struct segment_register segments[SEG_NUM ]; +unsigned long options; +unsigned char data[4096 ]; +} input; +#define DATA_OFFSET offsetof(struct input_struct, data)static unsigned int data_index; -static unsigned int data_max; +static unsigned int data_num; +
Quoted 9 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c line 40
Quoted 3 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +3
-0+/* Randomly return success or failure when processing data. If +* `exception` is false, this function turns _EXCEPTION to _OKAY. +*/ I'm not sure what coding style is to apply here, but if I consider this an extension to the insn emulator harness, which in turn is covered by hypervisor style, then the comment here needs /* to go on a separate line.
Fixed.
Quoted 9 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c line 45
Quoted 5 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +5
-0+int maybe_fail (const char *why,bool exception) +{ +int rc; + +if ( data_index +1 > data_num )"
data_index>=data_num" would be the more conventional way to express this.
Fixed.
Quoted 6 lines
Quoted 6 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +6
-0+static int _fuzz_rep_read (const char *why,unsigned long *reps) +{ +int rc; +unsigned long bytes_read =0 ; + + rc =data_read (why, &bytes_read,sizeof (bytes_read));
Quoted 9 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_read( · line 132
Quoted 3 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +3
-0+ +if ( bytes_read < *reps ) + *reps -= bytes_read;I don't understand this: In the success case, *reps upon return indicates the number of iterations done, not the number of iterations left. So at least the variable naming deserves improvement.
OK, so this should be *reps = bytes_read.
Quoted 10 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_read( · line 136
Quoted 3 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +3
-0+/* Indicate we haven't done any work if emulation has failed */ +if ( rc !=X86EMUL_OKAY ) + *reps =0 ;That'll result in some code paths never taken. I'd suggest clearing to zero only in the UNHANDLEABLE case, and simply halving the amount for EXCEPTION or RETRY (granted the latter can't occur right now), or even using input data too for determining the new value.
No problem. This function is now like:
static int _fuzz_rep_read(const char *why, unsigned long *reps)
{
int rc;
unsigned long bytes_read = 0;
rc = data_read(why, &bytes_read, sizeof(bytes_read));
if ( bytes_read < *reps )
*reps = bytes_read;
switch ( rc )
{
case X86EMUL_UNHANDLEABLE:
*reps = 0;
break;
case X86EMUL_EXCEPTION:
case X86EMUL_RETRY:
*reps /= 2;
}
return rc;
}And I will do the same to rep_write.
Quoted 12 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_read( · line 160
Quoted 9 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +9
-0+static int fuzz_rep_ins ( +uint16_t src_port, +enum x86_segment dst_seg, +unsigned long dst_offset, +unsigned int bytes_per_rep, +unsigned long *reps, +struct x86_emulate_ctxt *ctxt) +{ +return _fuzz_rep_read ("rep_in" , reps);"
rep_ins"
Fixed.
Quoted 12 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 248
Quoted 8 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +8
-0+static int fuzz_cpuid ( +uint32_t leaf, +uint32_t subleaf, +struct cpuid_leaf *res, +struct x86_emulate_ctxt *ctxt) +{ +return emul_test_cpuid (leaf, subleaf, res, ctxt); +}I don't think you need this wrapper anymore. For the purpose of
SET()below a simple #define will do.
Fixed.
Quoted 4 lines
Quoted 4 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +4
-0+static int fuzz_read_segment ( +enum x86_segment seg, +struct segment_register *reg, +struct x86_emulate_ctxt *ctxt)
Quoted 9 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 258
Quoted 5 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +5
-0+{ +int rc; + +if ( seg >SEG_NUM ) +return X86EMUL_UNHANDLEABLE ;As said before - this wants to be >= (even more so with input.segments only having
SEG_NUMelements).
Done, and fixed write_segment too.
Quoted 5 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 263
Quoted 4 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +4
-0+ rc =maybe_fail ("read_segment" , true); + +if ( rc ==X86EMUL_OKAY ) +memcpy (reg, input.segments+seg,sizeof (struct segment_register ));
Quoted 14 lines
Please prefer (type safe) structure assignment.
Quoted 11 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +9
-0+static int fuzz_read_cr ( +unsigned int reg, +unsigned long *val, +struct x86_emulate_ctxt *ctxt) +{ +int rc; + +if ( reg >ARRAY_SIZE (input.cr) ) +return X86EMUL_UNHANDLEABLE ;= again.
Done, and fixed write_cr.
Quoted 6 lines
Quoted 6 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +6
-0+enum { +MSRI_IA32_SYSENTER_CS , +MSRI_IA32_SYSENTER_ESP , +MSRI_IA32_SYSENTER_EIP , +MSRI_EFER , +MSRI_STAR ,
Quoted 9 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 333
Quoted 6 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +6
-0+MSRI_LSTAR , +MSRI_CSTAR , +MSRI_SYSCALL_MASK +}; + +const static unsigned int msr_index[MSR_INDEX_MAX] = {Conventionally static comes first (as not being part of the type).
Done.
Quoted 4 lines
Quoted 4 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +4
-0+static int fuzz_read_msr ( +unsigned int reg, +uint64_t *val, +struct x86_emulate_ctxt *ctxt) {
Quoted 9 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 389
Quoted 6 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +6
-0+int rc; + + rc =maybe_fail ("read_msr" , true); +if ( rc !=X86EMUL_OKAY ) +return rc; +else No need for "else".
Done.
Quoted 16 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 459
Quoted 11 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +11
-0+static void setup_fpu_exception_handler (void ) +{ +/* FIXME - just disable exceptions for now */ +unsigned long a; + + asmvolatile ("fnclex" ); + a=0x37f ;/* FCW_DEFAULT in Xen */ + asmvolatile ("fldcw %0" ::"m" (a)); + a=0x1f80 ;/* MXCSR_DEFAULT in Xen */ + asmvolatile ("ldmxcsr %0" ::"m" (a) ); +}While I see that the FCW value has changed, the strange local variable is still there. If you really want to keep it, please at least add the missing spaces around the = signs. But I'd prefer
Quoted 3 lines
asm volatile ( "fldcw %0" :: "m" (0x37f /* FCW_DEFAULT in Xen */));
asm volatile ( "ldmxcsr %0" :: "m" (0x1f80 /* MXCSR_DEFAULT in Xen */) );This doesn't work.
x86-insn-emulator-fuzzer.c:445:5: error: memory input 0 is not directly addressable
That's why I kept the local variable. But I will add spaces around =.
Quoted 3 lines
And then - doesn't the ABI require these settings to be in effect upon program startup anyway?
I'm not sure about this -- reading AMD64 ABI Draft 0.99.8 doesn't reveal much for me. But having the code arranged like this hasn't caused any SIGFPE so far.
What do you suggest I do here?
Quoted 18 lines
Quoted 9 lines
+/*
+ * Constrain input to architecturally-possible states where
+ * the emulator relies on these
+ *
+ * In general we want the emulator to be as absolutely robust as
+ * possible; which means that we want to minimize the number of things
+ * it assumes about the input state. Tesing this means minimizing and
+ * removing as much of the input constraints as possible.
+ *Quoted 8 lines
+ * So we only add constraints that (in general) have been proven to
+ * cause crashes in the emulator.
+ *
+ * For future reference: other constraints which might be necessary at
+ * some point:
+ *
+ * - EFER.LMA => !EFLAGS.NT
+ * - In VM86 mode (and real mode?), force segment...
Quoted 1 line
As asked for before - please drop the mentioning of real mode here.
Done.
Quoted 26 lines
Quoted 26 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +25
-0+void sanitize_input (struct x86_emulate_ctxt *ctxt) { +struct cpu_user_regs *regs = &input.regs; +unsigned long bitmap = input.options; + +/* Some hooks can't be disabled. */ + input.options &= ~((1 <<HOOK_read)|(1 <<HOOK_insn_fetch)); + +/* Zero 'private' entries */ + regs->error_code =0 ; + regs->entry_vector =0 ; + +CANONICALIZE_MAYBE (rip); +CANONICALIZE_MAYBE (rsp); +CANONICALIZE_MAYBE (rbp); + +/* +* CR0.PG can't be set if CR0.PE isn't set. Set is more interesting, so +* set PE if PG is set. +*/ +if ( input.cr[0 ] &X86_CR0_PG ) + input.cr[0 ] |=X86_CR0_PE ; + +/* +* EFLAGS.VM not available in long mode +*/
Quoted 8 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static struct x86_emulate_ops fuzz_emulops = { · line 653
Quoted 6 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +6
-0+if (long_mode_active (ctxt) ) + regs->rflags &= ~X86_EFLAGS_VM ; + +/* +* EFLAGS.VM implies 16-bit mode +*/ Both of these are single line comments.
Done.
Quoted 8 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c int LLVMFuzzerTestOneInput(const uint8_t *data_p, size_t size) · line 707
Quoted 4 lines
do {tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +2
-0+/* FIXME: Until we actually implement SIGFPE handling properly */ +setup_fpu_exception_handler ();I don't think the comment is appropriate here - all that needs fixing is the body of that function (which iirc already has a respective comment).
Deleted this comment.
Quoted 1 line
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
Re: [PATCH v2 10/12] fuzz/x86emul: update fuzzer
Quoted 16 lines · Wei Liu
Quoted 15 lines · Jan Beulich
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 459
Quoted 11 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +11
-0+static void setup_fpu_exception_handler (void ) +{ +/* FIXME - just disable exceptions for now */ +unsigned long a; + + asmvolatile ("fnclex" ); + a=0x37f ;/* FCW_DEFAULT in Xen */ + asmvolatile ("fldcw %0" ::"m" (a)); + a=0x1f80 ;/* MXCSR_DEFAULT in Xen */ + asmvolatile ("ldmxcsr %0" ::"m" (a) ); +}While I see that the FCW value has changed, the strange local variable is still there. If you really want to keep it, please at least add the missing spaces around the = signs. But I'd prefer
Quoted 6 lines
Quoted 3 lines
asm volatile ( "fldcw %0" :: "m" (0x37f /* FCW_DEFAULT in Xen */)); asm volatile ( "ldmxcsr %0" :: "m" (0x1f80 /* MXCSR_DEFAULT in Xen */) );This doesn't work.
x86-insn-emulator-fuzzer.c:445:5: error: memory input 0 is not directly addressable
Indeed. Both fldcw and ldmxcsr can only take memory operands, so cannot take immediate values in the inline asm.
Quoted 8 lines
Quoted 3 lines
And then - doesn't the ABI require these settings to be in effect upon program startup anyway?
I'm not sure about this -- reading AMD64 ABI Draft 0.99.8 doesn't reveal much for me. But having the code arranged like this hasn't caused any SIGFPE so far.
What do you suggest I do here?
The issue George hit was that AFL managed to emulate alternative loads, which then caused SIGFPE's to start happening to the test harness.
IIRC, the easy fix was to reset this state before emulating each instruction.
~Andrew
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
Re: [PATCH v2 10/12] fuzz/x86emul: update fuzzer
Quoted 34 lines · Andrew Cooper
Quoted 16 lines · Wei Liu
Quoted 15 lines · Jan Beulich
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 459
Quoted 11 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +11
-0+static void setup_fpu_exception_handler (void ) +{ +/* FIXME - just disable exceptions for now */ +unsigned long a; + + asmvolatile ("fnclex" ); + a=0x37f ;/* FCW_DEFAULT in Xen */ + asmvolatile ("fldcw %0" ::"m" (a)); + a=0x1f80 ;/* MXCSR_DEFAULT in Xen */ + asmvolatile ("ldmxcsr %0" ::"m" (a) ); +}While I see that the FCW value has changed, the strange local variable is still there. If you really want to keep it, please at least add the missing spaces around the = signs. But I'd prefer
Quoted 6 lines
Quoted 3 lines
asm volatile ( "fldcw %0" :: "m" (0x37f /* FCW_DEFAULT in Xen */)); asm volatile ( "ldmxcsr %0" :: "m" (0x1f80 /* MXCSR_DEFAULT in Xen */) );This doesn't work.
x86-insn-emulator-fuzzer.c:445:5: error: memory input 0 is not directly addressable
Indeed. Both fldcw and ldmxcsr can only take memory operands, so cannot take immediate values in the inline asm.
Quoted 7 lines
Quoted 3 lines
And then - doesn't the ABI require these settings to be in effect upon program startup anyway?
I'm not sure about this -- reading AMD64 ABI Draft 0.99.8 doesn't reveal much for me. But having the code arranged like this hasn't caused any SIGFPE so far.
Quoted 7 lines
Quoted 1 line
What do you suggest I do here?
The issue George hit was that AFL managed to emulate alternative loads, which then caused SIGFPE's to start happening to the test harness.
IIRC, the easy fix was to reset this state before emulating each instruction.
Yes, the "proper" fix is to catch SIGFPE and implement the #FP callback functionality. Clearing the exceptions every instruction was a work-around so that I could get useful results without doing so.
-George
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
Re: [PATCH v2 10/12] fuzz/x86emul: update fuzzer
In reply to Andrew CooperQuoted 21 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 16:57, <[email protected]> wrote:
Quoted 19 lines · Wei Liu
Quoted 18 lines · Jan Beulich
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 459
Quoted 11 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +11
-0+static void setup_fpu_exception_handler (void ) +{ +/* FIXME - just disable exceptions for now */ +unsigned long a; + + asmvolatile ("fnclex" ); + a=0x37f ;/* FCW_DEFAULT in Xen */ + asmvolatile ("fldcw %0" ::"m" (a)); + a=0x1f80 ;/* MXCSR_DEFAULT in Xen */ + asmvolatile ("ldmxcsr %0" ::"m" (a) ); +}While I see that the FCW value has changed, the strange local variable is still there. If you really want to keep it, please at least add the missing spaces around the = signs. But I'd prefer
asm volatile ( "fldcw %0" :: "m" (0x37f /* FCW_DEFAULT in Xen */)); asm volatile ( "ldmxcsr %0" :: "m" (0x1f80 /* MXCSR_DEFAULT in Xen */) );
Quoted 6 lines
Quoted 3 lines
This doesn't work.
x86-insn-emulator-fuzzer.c:445:5: error: memory input 0 is not directly addressable
Indeed. Both fldcw and ldmxcsr can only take memory operands, so cannot take immediate values in the inline asm.
Nevertheless I don't understand: The constraint correctly says memory only. I'd have expected the compiler to materialize a memory object (initialized with the given value) in order to hand it to the asm().
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
And then - doesn't the ABI require these settings to be in effect upon program startup anyway?
I'm not sure about this -- reading AMD64 ABI Draft 0.99.8 doesn't reveal much for me. But having the code arranged like this hasn't caused any SIGFPE so far.
Quoted 7 lines
Quoted 1 line
What do you suggest I do here?
The issue George hit was that AFL managed to emulate alternative loads, which then caused SIGFPE's to start happening to the test harness.
IIRC, the easy fix was to reset this state before emulating each instruction.
Oh, right, this isn't done just once at startup.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
Re: [PATCH v2 10/12] fuzz/x86emul: update fuzzer
In reply to Wei LiuQuoted 18 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 16:51, <[email protected]> wrote:
Quoted 15 lines · Jan Beulich
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_read( · line 132
Quoted 10 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +9
-0+static int _fuzz_rep_read (const char *why,unsigned long *reps) +{ +int rc; +unsigned long bytes_read =0 ; + + rc =data_read (why, &bytes_read,sizeof (bytes_read)); + +if ( bytes_read < *reps ) + *reps -= bytes_read;I don't understand this: In the success case, *reps upon return indicates the number of iterations done, not the number of iterations left. So at least the variable naming deserves improvement.
Quoted 1 line
OK, so this should be *reps =
bytes_read.
And the comparison should then presumably become <= .
Quoted 18 lines
Quoted 16 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 459
Quoted 11 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +11
-0+static void setup_fpu_exception_handler (void ) +{ +/* FIXME - just disable exceptions for now */ +unsigned long a; + + asmvolatile ("fnclex" ); + a=0x37f ;/* FCW_DEFAULT in Xen */ + asmvolatile ("fldcw %0" ::"m" (a)); + a=0x1f80 ;/* MXCSR_DEFAULT in Xen */ + asmvolatile ("ldmxcsr %0" ::"m" (a) ); +}While I see that the FCW value has changed, the strange local variable is still there. If you really want to keep it, please at least add the missing spaces around the = signs. But I'd prefer
Quoted 2 lines
asm volatile ( "fldcw %0" :: "m" (0x37f /* FCW_DEFAULT in Xen */)); asm volatile ( "ldmxcsr %0" :: "m" (0x1f80 /* MXCSR_DEFAULT in Xen */)
Quoted 7 lines
);
Quoted 1 line
This doesn't work.
x86-insn-emulator-fuzzer.c:445:5: error: memory input 0 is not directly addressable
Oh. Not sure why that is.
Quoted 9 lines
Quoted 3 lines
And then - doesn't the ABI require these settings to be in effect upon program startup anyway?
I'm not sure about this -- reading AMD64 ABI Draft 0.99.8 doesn't reveal much for me. But having the code arranged like this hasn't caused any SIGFPE so far.
What do you suggest I do here?
Well, you can keep the code as is if there's uncertainty. The question was mainly from the perspective of whether the non- fuzzing test would need to do something similar. With the SSEn/AVX test blob I'm close to round up, I haven't run into any situation where the initial settings hadn't been the intended ones.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
Re: [PATCH v2 10/12] fuzz/x86emul: update fuzzer
Quoted 18 lines · Jan Beulich
Quoted 18 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 16:51, <[email protected]> wrote:
Quoted 15 lines · Jan Beulich
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_read( · line 132
Quoted 10 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +9
-0+static int _fuzz_rep_read (const char *why,unsigned long *reps) +{ +int rc; +unsigned long bytes_read =0 ; + + rc =data_read (why, &bytes_read,sizeof (bytes_read)); + +if ( bytes_read < *reps ) + *reps -= bytes_read;I don't understand this: In the success case, *reps upon return indicates the number of iterations done, not the number of iterations left. So at least the variable naming deserves improvement.
Quoted 4 lines
Quoted 1 line
OK, so this should be *reps =
bytes_read.And the comparison should then presumably become <= .
Ah, yes.
Quoted 38 lines
Quoted 18 lines
Quoted 16 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c static int fuzz_cmpxchg( · line 459
Quoted 11 lines
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +11
-0+static void setup_fpu_exception_handler (void ) +{ +/* FIXME - just disable exceptions for now */ +unsigned long a; + + asmvolatile ("fnclex" ); + a=0x37f ;/* FCW_DEFAULT in Xen */ + asmvolatile ("fldcw %0" ::"m" (a)); + a=0x1f80 ;/* MXCSR_DEFAULT in Xen */ + asmvolatile ("ldmxcsr %0" ::"m" (a) ); +}While I see that the FCW value has changed, the strange local variable is still there. If you really want to keep it, please at least add the missing spaces around the = signs. But I'd prefer
Quoted 2 lines
asm volatile ( "fldcw %0" :: "m" (0x37f /* FCW_DEFAULT in Xen */)); asm volatile ( "ldmxcsr %0" :: "m" (0x1f80 /* MXCSR_DEFAULT in Xen */)Quoted 7 lines
);
Quoted 1 line
This doesn't work.
x86-insn-emulator-fuzzer.c:445:5: error: memory input 0 is not directly addressable
Oh. Not sure why that is.
Quoted 9 lines
Quoted 3 lines
And then - doesn't the ABI require these settings to be in effect upon program startup anyway?
I'm not sure about this -- reading AMD64 ABI Draft 0.99.8 doesn't reveal much for me. But having the code arranged like this hasn't caused any SIGFPE so far.
What do you suggest I do here?
Quoted 8 lines
Well, you can keep the code as is if there's uncertainty. The question was mainly from the perspective of whether the non- fuzzing test would need to do something similar. With the SSEn/AVX test blob I'm close to round up, I haven't run into any situation where the initial settings hadn't been the intended ones.
Jan
Right. I will leave the code as-is for now.
Wei.
Quoted 1 line
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
PATCH v2 11/12 fuzz/x86emul: print out minimal input size
In reply to Wei Liu... so that users can know how big the initial input should be.
---
Cc: Ian Jackson <[email protected]>
Cc: Jan Beulich <[email protected]>
Cc: Andrew Cooper <[email protected]>
Cc: George Dunlap <[email protected]>
--- .../fuzz/x86_instruction_emulator/afl-x86-insn-emulator-fuzzer.c | 8 ++++++++ tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c | 5 +++++ 2 files changed, 13 insertions(+)
tools/fuzz/x86_instruction_emulator/afl-x86-insn-emulator-fuzzer.c +8 -0
@@ -2,8 +2,10 @@#include <stdint.h> #include <stdio.h> #include <stdlib.h> +#include <string.h> extern int LLVMFuzzerTestOneInput (const uint8_t *data_p,size_t size); +extern unsigned int fuzz_minimal_input_size (void );#define INPUT_SIZE 4096static uint8_t input[INPUT_SIZE ];
@@ -21,6 +23,12 @@ int main(int argc, char **argv)exit (-1 ); } +if ( !strcmp (argv[1 ],"--min-input-size" ) ) + { +printf ("%u\n" ,fuzz_minimal_input_size ()); +exit (0 ); + } + fp =fopen (argv[1 ],"rb" );if ( fp ==NULL ) {
tools/fuzz/x86_instruction_emulator/x86-insn-emulator-fuzzer.c +5 -0
@@ -716,6 +716,11 @@ int LLVMFuzzerTestOneInput(const uint8_t *data_p, size_t size)return 0 ; } +unsigned int fuzz_minimal_input_size (void ) +{ +return DATA_OFFSET +1 ; +} +/* * Local variables: * mode: C
Signature · 7 lines
2.11.0 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xen.org/xen-devel
Re: [PATCH v2 11/12] fuzz/x86emul: print out minimal input size
Quoted 4 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
... so that users can know how big the initial input should be.
Signed-off-by Wei Liu <[email protected]>
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel
PATCH v2 12/12 fuzz: update README.afl example
In reply to Wei Liu---
Cc: Ian Jackson <[email protected]>
Cc: Jan Beulich <[email protected]>
Cc: Andrew Cooper <[email protected]>
Cc: George Dunlap <[email protected]>
--- tools/fuzz/README.afl | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
tools/fuzz/README.afl +3 -2
@@ -20,9 +20,10 @@ Use the x86 instruction emulator fuzzer as an example. $ make distclean $ make CC=$AFLPATH/afl-gcc afl # produces afl-x86-insn-emulator-fuzzer -3. provide initial test case: +3. provide initial test case (fuzzer dependent, see afl-*.c): $ mkdir testcase_dir - $ echo -n -e '\xc3' > testcase_dir/ret.bin + $ dd if=/dev/urandom of=testcase_dir/rand.bin \ + bs=`./afl-x86-insn-emulator-fuzzer --min-input-size` count=1 4. run the fuzzer with AFL: $ $AFLPATH/afl-fuzz -m none -t 1000 -i testcase_dir -o findings_dir -- \
Signature · 7 lines
2.11.0 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xen.org/xen-devel
Re: [PATCH v2 12/12] fuzz: update README.afl example
Quoted 2 lines
Quoted 1 line
Quoted 1 line · On 31.01.17 at 12:08, <[email protected]> wrote:
Signed-off-by Wei Liu <[email protected]>
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xen.org/xen-devel