Skip to contentSkip to conversation

ARM: dts: BCM53573: Specify PCIe card with bcma and ChipCommon (DT ranges mess)

RFC PATCH New Rafał Miłecki 1 participant 1 message Feb 1, 2017 Device tree bindings

lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 ARM: dts: BCM53573: Specify PCIe card with bcma and ChipCommon (DT ranges mess)

From: Rafa? Mi?ecki <[email protected]>

Tenda AC9 has PCIe controller with just one card connected to it:
0000:00:00.0 14e4:d145 Bridge Device
?? 0000:01:00.0 14e4:a8db Network Controller

This card has bcma bus with GPIO controller on its ChipCommon core. We need to describe that if we want to reference that GPIO controller in DT.

This patch adds nested DT entries for:
1) PCIe controller
2) PCIe bridge
3) PCIe wireless card
4) ChipCommon that is on the wireless card

---
This DT change seems to work, it only requires a simple change in bcma code of adding bcma_of_fill_device call for PCIe hosted bus.

I'm not convinced about these ranges though. I need them because bcma uses of_translate_address. AFAIU this function requires ranges to be specified all the way up till the root node. It means I need to specify them for every nested node. I also can't simply use:
ranges;
because it works only for #address-cells 1 and #size-cells 1.

Also since ranges expects
parent #address-cells, child #address-cells, #size-cells I needed different values depending on the node.

Does it look OK to you? Or is there some easier solution?

---
 arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 10 ++++++++++
 arch/arm/boot/dts/bcm53573.dtsi          | 33 ++++++++++++++++++++++++++++++++
 2 files changed, 43 insertions(+)
arch/arm/boot/dts/bcm47189-tenda-ac9.dts +10 -0
index 4403ae8790c2..1c36ee1f94a0 100644
@@ -48,6 +48,16 @@
 		};
 	};
 
+	pcie0_leds {
+		compatible = "gpio-leds";
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
arch/arm/boot/dts/bcm53573.dtsi +33 -0
index 2da04d0a7348..b55491da63d7 100644
@@ -113,6 +113,39 @@
 			};
 		};
 
+		pcie0: pcie at 12000 {
+			reg = <0x00002000 0x1000>;
+
+			/* All code below looks device specific and should go to
+			 * the device DT. It's here only for RFC patch needs to
+			 * make it easier to review.
+			 */
+			ranges = <0x00000000 0 0 0 0 0x00100000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bridge at 0,0,0 {
+				reg = <0x0000 0 0 0 0>;
+				ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				wifi at 0,1,0 {
+					reg = <0x0000 0 0 0 0>;
+					ranges = <0x00000000 0 0 0 0x00100000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					pcie0_chipcommon: chipcommon at 0 {
+						reg = <0 0x1000>;
+
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+			};
+		};
+
 		usb2: usb2 at 4000 {
 			reg = <0x4000 0x1000>;
 			ranges;
Signature · 1 line
2.11.0