Skip to contentSkip to conversation

gpio: Add GPIO support for the ACCES PCI-IDIO-16

PATCH In review William Breathitt Gray 2 participants 2 messages Feb 1, 2017 – Feb 6, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 gpio: Add GPIO support for the ACCES PCI-IDIO-16

The ACCES PCI-IDIO-16 device provides 32 lines of digital I/O (16 lines of optically-isolated digital inputs for AC and DC control signals, and 16 lines of solid state switch digital outputs). An interrupt is generated when any of the inputs change state (low to high or high to low). Input filter control is not supported by this driver, and input filters are deactivated by this driver.

---
 MAINTAINERS                     |   6 +
 drivers/gpio/Kconfig            |   9 ++
 drivers/gpio/Makefile           |   1 +
 drivers/gpio/gpio-pci-idio-16.c | 348 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 364 insertions(+)
 create mode 100644 drivers/gpio/gpio-pci-idio-16.c
MAINTAINERS +6 -0
index cfff2c9e3d94..25bf100967de 100644
@@ -266,6 +266,12 @@ L:	[email protected]
 S:	Maintained
 F:	drivers/iio/counter/104-quad-8.c
 
+ACCES PCI-IDIO-16 GPIO DRIVER
+M:	William Breathitt Gray <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	drivers/gpio/gpio-pci-idio-16.c
+
 ACENIC DRIVER
 M:	Jes Sorensen <[email protected]>
 L:	[email protected]
drivers/gpio/Kconfig +9 -0
index 2d7739222cdb..4d5b2c4426a6 100644
@@ -1157,6 +1157,15 @@ config GPIO_PCH
 	  ML7223/ML7831 is companion chip for Intel Atom E6xx series.
 	  ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
+config GPIO_PCI_IDIO_16
+	tristate "ACCES PCI-IDIO-16 GPIO support"
+	select GPIOLIB_IRQCHIP
+	help
+	  Enables GPIO support for the ACCES PCI-IDIO-16. An interrupt is
+	  generated when any of the inputs change state (low to high or high to
+	  low). Input filter control is not supported by this driver, and the
+	  input filters are deactivated by this driver.
+
 config GPIO_RDC321X
 	tristate "RDC R-321x GPIO support"
 	select MFD_CORE
drivers/gpio/Makefile +1 -0
index ee8b0dcac623..becb96c724fe 100644
@@ -92,6 +92,7 @@ obj-$(CONFIG_GPIO_OMAP)		+= gpio-omap.o
 obj-$(CONFIG_GPIO_PCA953X)	+= gpio-pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o
 obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
+obj-$(CONFIG_GPIO_PCI_IDIO_16)	+= gpio-pci-idio-16.o
 obj-$(CONFIG_GPIO_PISOSR)	+= gpio-pisosr.o
 obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
 obj-$(CONFIG_GPIO_PXA)		+= gpio-pxa.o
drivers/gpio/gpio-pci-idio-16.c new file +348 -0

348 lines not on this page · raw message

Signature · 1 line
2.11.0
#1 lore raw
Quoted 8 lines · William Breathitt Gray

The ACCES PCI-IDIO-16 device provides 32 lines of digital I/O (16 lines of optically-isolated digital inputs for AC and DC control signals, and 16 lines of solid state switch digital outputs). An interrupt is generated when any of the inputs change state (low to high or high to low). Input filter control is not supported by this driver, and input filters are deactivated by this driver.

Patch applied.

Yours,
Linus Walleij