ARM: dts: imx6q-bx50v3/imx6q-b450v3/imx6q-b650v3: change pca953x GPIO default settings
Subsystems (2)
PATCH 1/1 ARM: dts: imx6q-bx50v3/imx6q-b450v3/imx6q-b650v3: change pca953x GPIO default settings
Leave pca953x P06,P07 pins on b850v3 platform and P06 pin on b450v3/b650v3 unconfigured in the kernel space since they could be configured as DP1_RST and DP2_RST by the applications for the DP FW update support
Signed-off-by Ken Lin <[email protected]>
--- arch/arm/boot/dts/imx6q-b450v3.dts | 7 +++++++ arch/arm/boot/dts/imx6q-b650v3.dts | 7 +++++++ arch/arm/boot/dts/imx6q-bx50v3.dtsi | 14 -------------- 3 files changed, 14 insertions(+), 14 deletions(-)
arch/arm/boot/dts/imx6q-b450v3.dts +7 -0
@@ -104,4 +104,11 @@ output-low; line-name = "PCA9539-P05"; }; + + P07 { + gpio-hog; + gpios = <7 0>; + output-low; + line-name = "PCA9539-P07"; + }; };
arch/arm/boot/dts/imx6q-b650v3.dts +7 -0
@@ -97,6 +97,13 @@ output-low; line-name = "PCA9539-P05"; }; + + P07 { + gpio-hog; + gpios = <7 0>; + output-low; + line-name = "PCA9539-P07"; + }; }; &usbphy1 {
arch/arm/boot/dts/imx6q-bx50v3.dtsi +0 -14
@@ -184,20 +184,6 @@ interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - P06 { - gpio-hog; - gpios = <6 0>; - output-low; - line-name = "PCA9539-P06"; - }; - - P07 { - gpio-hog; - gpios = <7 0>; - output-low; - line-name = "PCA9539-P07"; - }; - P10 { gpio-hog; gpios = <8 0>;
Signature · 1 line
2.11.0
Quoted 5 lines · Ken Lin
Leave pca953x P06,P07 pins on b850v3 platform and P06 pin on b450v3/b650v3 unconfigured in the kernel space since they could be configured as
DP1_RSTandDP2_RSTby the applications for the DP FW update supportSigned-off-by Ken Lin <[email protected]>
I wrapped commit log and shorten the subject prefix a bit, and then applied the patch.
Shawn