qemu-nbd: Implement socket activation.
PATCH v4 1/1 qemu-nbd: Implement socket activation.
v3 -> v4:
- Remove restriction on --fork again.
- Retest the patch using virt-p2v.
Rich.
PATCH v4 1/1 qemu-nbd: Implement socket activation.
Socket activation (sometimes known as systemd socket activation) allows an Internet superserver to pass a pre-opened listening socket to the process, instead of having qemu-nbd open a socket itself. This is done via the LISTEN_FDS and LISTEN_PID environment variables, and a standard file descriptor range.
This change partially implements socket activation for qemu-nbd. If the environment variables are set correctly, then socket activation will happen automatically, otherwise everything works as before. The limitation is that LISTEN_FDS must be 1.
Signed-off-by Richard W.M. Jones.
--- qemu-nbd.c | 175 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 166 insertions(+), 9 deletions(-)
qemu-nbd.c +166 -9
@@ -463,6 +463,138 @@ static QCryptoTLSCreds *nbd_get_tls_creds(const char *id, Error **errp)return creds; } +#define MACRO_EXPAND_STRINGIFY (x) STRINGIFY(x) +#define STRINGIFY (x) #x + +static void setup_address_and_port (const char **address,const char **port) +{ +if (*address ==NULL ) { + *address ="0.0.0.0" ; + } + +if (*port ==NULL ) { + *port =MACRO_EXPAND_STRINGIFY (NBD_DEFAULT_PORT ); + } +} + +#define FIRST_SOCKET_ACTIVATION_FD 3/* defined by systemd ABI */ + +#ifndef _WIN32 +/* +* Check if socket activation was requested via use of the +* LISTEN_FDS and LISTEN_PID environment variables. +* +* Returns 0 if no socket activation, or the number of FDs. +*/ +static unsigned int check_socket_activation (void ) +{ +const char *s; +unsigned long pid; +unsigned long nr_fds; +unsigned int i; +int fd; +int err; + + s =getenv ("LISTEN_PID" ); +if (s ==NULL ) { +return 0 ; + } + err =qemu_strtoul (s,NULL ,10 , &pid); +if (err) { +if (verbose) { +fprintf (stderr,"malformed %s environment variable (ignored)\n" , +"LISTEN_PID" ); + } +return 0 ; + } +if (pid !=getpid ()) { +if (verbose) { +fprintf (stderr,"%s was not for us (ignored)\n" , +"LISTEN_PID" ); + } +return 0 ; + } + + s =getenv ("LISTEN_FDS" ); +if (s ==NULL ) { +return 0 ; + } + err =qemu_strtoul (s,NULL ,10 , &nr_fds); +if (err) { +if (verbose) { +fprintf (stderr,"malformed %s environment variable (ignored)\n" , +"LISTEN_FDS" ); + } +return 0 ; + } +assert (nr_fds <=UINT_MAX ); + +/* A limitation of current qemu-nbd is that it can only listen on +* a single socket. When that limitation is lifted, we can change +* this function to allow LISTEN_FDS > 1, and remove the assertion +* in the main function below. +*/ +if (nr_fds >1 ) { +error_report ("qemu-nbd does not support socket activation with %s > 1" , +"LISTEN_FDS" ); +exit (EXIT_FAILURE ); + } + +/* So these are not passed to any child processes we might start. */ +unsetenv ("LISTEN_FDS" ); +unsetenv ("LISTEN_PID" ); + +/* So the file descriptors don't leak into child processes. */ +for (i =0 ; i < nr_fds; ++i) { + fd =FIRST_SOCKET_ACTIVATION_FD + i; +if (fcntl (fd,F_SETFD ,FD_CLOEXEC ) ==-1 ) { +/* If we cannot set FD_CLOEXEC then it probably means the file +* descriptor is invalid, so socket activation has gone wrong +* and we should exit. +*/ +error_report ("Socket activation failed: " +"invalid file descriptor fd = %d: %m" , + fd); +exit (EXIT_FAILURE ); + } + } + +return (unsigned int ) nr_fds; +} + +#else /* !_WIN32 */ +static unsigned int check_socket_activation (void ) +{ +return 0 ; +} +#endif + +/* +* Check socket parameters compatibility when socket activation is used. +*/ +static const char *socket_activation_validate_opts (const char *device, +const char *sockpath, +const char *address, +const char *port) +{ +if (device !=NULL ) { +return "NBD device can't be set when using socket activation" ; + } + +if (sockpath !=NULL ) { +return "Unix socket can't be set when using socket activation" ; + } + +if (address !=NULL ) { +return "The interface can't be set when using socket activation" ; + } + +if (port !=NULL ) { +return "TCP port number can't be set when using socket activation" ; + } + +return NULL ; +}int main (int argc,char **argv) {
@@ -471,7 +603,7 @@ int main(int argc, char **argv)off_t dev_offset =0 ;uint16_t nbdflags =0 ;bool disconnect = false; -const char *bindto ="0.0.0.0" ; +const char *bindto =NULL ;const char *port =NULL ;char *sockpath =NULL ;char *device =NULL ;
@@ -533,6 +665,7 @@ int main(int argc, char **argv)char *trace_file =NULL ;bool fork_process = false;int old_stderr =-1 ; +unsigned socket_activation;/* The client thread uses SIGTERM to interrupt the server. A signal * handler ensures that "qemu-nbd -v -c" exits with a nice status code.
@@ -751,6 +884,19 @@ int main(int argc, char **argv)trace_init_file (trace_file);qemu_set_log (LOG_TRACE ); + socket_activation =check_socket_activation (); +if (socket_activation ==0 ) { +setup_address_and_port (&bindto, &port); + }else { +/* Using socket activation - check user didn't use -p etc. */ +const char *err_msg =socket_activation_validate_opts (device, sockpath, + bindto, port); +if (err_msg !=NULL ) { +error_report ("%s" , err_msg); +exit (EXIT_FAILURE ); + } + } +if (tlscredsid) {if (sockpath) {error_report ("TLS is only supported with IPv4/IPv6" );
@@ -855,7 +1001,25 @@ int main(int argc, char **argv)snprintf (sockpath,128 ,SOCKET_PATH ,basename (device)); } - saddr =nbd_build_socket_address (sockpath, bindto, port); +if (socket_activation ==0 ) { + server_ioc =qio_channel_socket_new (); + saddr =nbd_build_socket_address (sockpath, bindto, port); +if (qio_channel_socket_listen_sync (server_ioc, saddr, &local_err) <0 ) { +object_unref (OBJECT (server_ioc)); +error_report_err (local_err); +return 1 ; + } + }else { +/* See comment in check_socket_activation above. */ +assert (socket_activation ==1 ); + server_ioc =qio_channel_socket_new_fd (FIRST_SOCKET_ACTIVATION_FD , + &local_err); +if (server_ioc ==NULL ) { +error_report ("Failed to use socket activation: %s" , +error_get_pretty (local_err)); +exit (EXIT_FAILURE ); + } + }if (qemu_init_main_loop (&local_err)) {error_report_err (local_err);
@@ -950,13 +1114,6 @@ int main(int argc, char **argv)exit (EXIT_FAILURE ); } - server_ioc =qio_channel_socket_new (); -if (qio_channel_socket_listen_sync (server_ioc, saddr, &local_err) <0 ) { -object_unref (OBJECT (server_ioc)); -error_report_err (local_err); -return 1 ; - } -if (device) {int ret;
Signature · 1 line
2.10.2