Skip to contentSkip to conversation

net: dsa: Support for pdata in dsa2

PATCH In review Florian Fainelli 2 participants 9 messages Feb 4, 2017 – Feb 6, 2017

Subsystems (7)
lore
Share & tools
lore
#0 lore raw

v5 cover net: dsa: Support for pdata in dsa2

Hi all,

This is not exactly new, and was sent before, although back then, I did not have an user of the pre-declared MDIO board information, but now we do. Note that I have additional changes queued up to have b53 register platform data for MIPS bcm47xx and bcm63xx.

Yes I know that we should have the Orion platforms eventually be converted to Device Tree, but until that happens, I don't want any remaining users of the old "dsa" platform device (hence the previous DTS submissions for ARM/mvebu) and, there will be platforms out there that most likely won't never see DT coming their way (BCM47xx is almost 100% sure, BCM63xx maybe not in a distant future).

We would probably want the whole series to be merged via David Miller's tree to simplify things.

Thanks!

Changes in v5:

- dropped changes to drivers/base/ because after more than a month, we cannot get any answer from Greg KH

- rebased against latest net-next/master

Changes in v4:

- Changed device_find_class() to device_find_in_class_name()
- Added kerneldoc above device_find_in_class_name() to explain what it does and the calling convention regarding device reference counts
- Changed dev_to_net_device to device_to_net_device() added comments about what it does and the caller conventions regarding reference counts

Changes in v3:

- Tested EPROBE_DEFER from a mockup MDIO/DSA switch driver and everything is fine, once the driver finally probes we have access to platform data as expected

- added comment above dsa_port_is_valid() that port->name is mandatory for platform data cases

- added an extra check in dsa_parse_member() for a NULL pdata pointer

- fixed a bunch of checkpatch errors and warnings

Changes in v2:

- Rebased against latest net-next/master

- Moved dev_find_class() to device_find_class() into drivers/base/core.c

- Moved dev_to_net_device into net/core/dev.c

- Utilize dsa_chip_data directly instead of dsa_platform_data

- Augmented dsa_chip_data to be multi-CPU port ready

Changes from last submission (few months back):

- rebased against latest net-next

- do not introduce dsa2_platform_data which was overkill and was meant to allow us to do exaclty the same things with platform data and Device Tree we use the existing dsa_platform_data instead

- properly register MDIO devices when the MDIO bus is registered and associate platform_data with them

- add a change to the Orion platform code to demonstrate how this can be used

Thank you

Florian Fainelli (4):
net: dsa: Rename and export dev_to_net_device()
net: dsa: Add support for platform data
net: phy: Allow pre-declaration of MDIO devices
ARM: orion: Register DSA switch as a MDIO device

 arch/arm/mach-orion5x/common.c               |   2 +-
 arch/arm/mach-orion5x/common.h               |   4 +-
 arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c |   7 +-
 arch/arm/mach-orion5x/rd88f5181l-ge-setup.c  |   7 +-
 arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c |   7 +-
 arch/arm/mach-orion5x/wnr854t-setup.c        |   2 +-
 arch/arm/mach-orion5x/wrt350n-v2-setup.c     |   7 +-
 arch/arm/plat-orion/common.c                 |  25 +++++--
 arch/arm/plat-orion/include/plat/common.h    |   4 +-
 drivers/net/phy/Makefile                     |   3 +-
 drivers/net/phy/mdio-boardinfo.c             |  86 ++++++++++++++++++++++
 drivers/net/phy/mdio-boardinfo.h             |  19 +++++
 drivers/net/phy/mdio_bus.c                   |   4 ++
 drivers/net/phy/mdio_device.c                |  11 +++
 include/linux/mdio.h                         |   3 +
 include/linux/mod_devicetable.h              |   1 +
 include/linux/phy.h                          |  19 +++++
 include/net/dsa.h                            |   7 ++
 net/dsa/dsa.c                                |   5 +-
 net/dsa/dsa2.c                               | 102 ++++++++++++++++++++++-----
 20 files changed, 268 insertions(+), 57 deletions(-)
 create mode 100644 drivers/net/phy/mdio-boardinfo.c
 create mode 100644 drivers/net/phy/mdio-boardinfo.h
Signature · 1 line
2.9.3
#1 lore raw

PATCH v5 1/4 net: dsa: Rename and export dev_to_net_device()

In preparation for using this function in net/dsa/dsa2.c, rename the function to make its scope DSA specific, and export it.

---
 include/net/dsa.h | 1 +
 net/dsa/dsa.c     | 5 +++--
 2 files changed, 4 insertions(+), 2 deletions(-)
include/net/dsa.h +1 -0
index 2cb77e64d648..4327b0b03293 100644
@@ -428,6 +428,7 @@ struct dsa_switch_driver {
 void register_switch_driver(struct dsa_switch_driver *type);
 void unregister_switch_driver(struct dsa_switch_driver *type);
 struct mii_bus *dsa_host_dev_to_mii_bus(struct device *dev);
+struct net_device *dsa_dev_to_net_device(struct device *dev);
 
 static inline bool dsa_uses_tagged_protocol(struct dsa_switch_tree *dst)
 {
net/dsa/dsa.c +3 -2
index 619e57a44d1d..5a5f79bbda6f 100644
@@ -486,7 +486,7 @@ struct mii_bus *dsa_host_dev_to_mii_bus(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(dsa_host_dev_to_mii_bus);
 
-static struct net_device *dev_to_net_device(struct device *dev)
+struct net_device *dsa_dev_to_net_device(struct device *dev)
 {
 	struct device *d;
 
@@ -503,6 +503,7 @@ static struct net_device *dev_to_net_device(struct device *dev)
 
 	return NULL;
 }
+EXPORT_SYMBOL_GPL(dsa_dev_to_net_device);
 
 #ifdef CONFIG_OF
 static int dsa_of_setup_routing_table(struct dsa_platform_data *pd,
@@ -811,7 +812,7 @@ static int dsa_probe(struct platform_device *pdev)
 		dev = pd->of_netdev;
 		dev_hold(dev);
 	} else {
-		dev = dev_to_net_device(pd->netdev);
+		dev = dsa_dev_to_net_device(pd->netdev);
 	}
 	if (dev == NULL) {
 		ret = -EPROBE_DEFER;
Signature · 1 line
2.9.3
#2 lore raw

PATCH v5 2/4 net: dsa: Add support for platform data

In reply to Florian Fainelli

Allow drivers to use the new DSA API with platform data. Most of the code in net/dsa/dsa2.c does not rely so much on device_nodes and can get the same information from platform_data instead.

We purposely do not support distributed configurations with platform data, so drivers should be providing a pointer to a 'struct dsa_chip_data' structure if they wish to communicate per-port layout.

Multiple CPUs port could potentially be supported and dsa_chip_data is extended to receive up to one reference to an upstream network device per port described by a dsa_chip_data structure.

dsa_dev_to_net_device() increments the network device's reference count, so we intentionally call dev_put() to be consistent with the DT-enabled path, until we have a generic notifier based solution.

---
 include/net/dsa.h |   6 ++++
 net/dsa/dsa2.c    | 102 ++++++++++++++++++++++++++++++++++++++++++++----------
 2 files changed, 90 insertions(+), 18 deletions(-)
include/net/dsa.h +6 -0
index 4327b0b03293..4449f22c64ba 100644
@@ -44,6 +44,11 @@ struct dsa_chip_data {
 	struct device	*host_dev;
 	int		sw_addr;
 
+	/*
+	 * Reference to network devices
+	 */
+	struct device	*netdev[DSA_MAX_PORTS];
+
 	/* set to size of eeprom if supported by the switch */
 	int		eeprom_len;
 
@@ -166,6 +171,7 @@ struct dsa_mall_tc_entry {
 struct dsa_port {
 	struct dsa_switch	*ds;
 	unsigned int		index;
+	const char		*name;
 	struct net_device	*netdev;
 	struct device_node	*dn;
 	unsigned int		ageing_time;
net/dsa/dsa2.c +84 -18

165 lines not on this page · raw message

Signature · 1 line
2.9.3
#3 lore raw

PATCH v5 3/4 net: phy: Allow pre-declaration of MDIO devices

In reply to Florian Fainelli

Allow board support code to collect pre-declarations for MDIO devices by registering them with mdiobus_register_board_info(). SPI and I2C buses have a similar feature, we were missing this for MDIO devices, but this is particularly useful for e.g: MDIO-connected switches which need to provide their port layout (often board-specific) to a MDIO Ethernet switch driver.

---
 drivers/net/phy/Makefile         |  3 +-
 drivers/net/phy/mdio-boardinfo.c | 86 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/phy/mdio-boardinfo.h | 19 +++++++++
 drivers/net/phy/mdio_bus.c       |  4 ++
 drivers/net/phy/mdio_device.c    | 11 +++++
 include/linux/mdio.h             |  3 ++
 include/linux/mod_devicetable.h  |  1 +
 include/linux/phy.h              | 19 +++++++++
 8 files changed, 145 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/phy/mdio-boardinfo.c
 create mode 100644 drivers/net/phy/mdio-boardinfo.h
drivers/net/phy/Makefile +2 -1
index 356859ac7c18..407b0b601ea8 100644
@@ -1,6 +1,7 @@
 # Makefile for Linux PHY drivers and MDIO bus drivers
 
-libphy-y			:= phy.o phy_device.o mdio_bus.o mdio_device.o
+libphy-y			:= phy.o phy_device.o mdio_bus.o mdio_device.o \
+				   mdio-boardinfo.o
 libphy-$(CONFIG_SWPHY)		+= swphy.o
 libphy-$(CONFIG_LED_TRIGGER_PHY)	+= phy_led_triggers.o
 
drivers/net/phy/mdio-boardinfo.c new file +86 -0

86 lines not on this page · raw message

drivers/net/phy/mdio-boardinfo.h new file +19 -0
new file mode 100644
index 000000000000..00f98163e90e
@@ -0,0 +1,19 @@
+/*
+ * mdio-boardinfo.h - board info interface internal to the mdio_bus
+ * component
+ */
+
+#ifndef __MDIO_BOARD_INFO_H
+#define __MDIO_BOARD_INFO_H
+
+#include <linux/phy.h>
+#include <linux/mutex.h>
+
+struct mdio_board_entry {
+	struct list_head	list;
+	struct mdio_board_info	board_info;
+};
+
+void mdiobus_setup_mdiodev_from_board_info(struct mii_bus *bus);
+
+#endif /* __MDIO_BOARD_INFO_H */
drivers/net/phy/mdio_bus.c +4 -0
index 653d076eafe5..fa7d51f14869 100644
@@ -41,6 +41,8 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/mdio.h>
 
+#include "mdio-boardinfo.h"
+
 int mdiobus_register_device(struct mdio_device *mdiodev)
 {
 	if (mdiodev->bus->mdio_map[mdiodev->addr])
@@ -343,6 +345,8 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 		}
 	}
 
+	mdiobus_setup_mdiodev_from_board_info(bus);
+
 	bus->state = MDIOBUS_REGISTERED;
 	pr_info("%s: probed\n", bus->name);
 	return 0;
drivers/net/phy/mdio_device.c +11 -0
index fc3aaaa36b1d..e24f28924af8 100644
@@ -34,6 +34,17 @@ static void mdio_device_release(struct device *dev)
 	kfree(to_mdio_device(dev));
 }
 
+int mdio_device_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct mdio_device *mdiodev = to_mdio_device(dev);
+	struct mdio_driver *mdiodrv = to_mdio_driver(drv);
+
+	if (mdiodrv->mdiodrv.flags & MDIO_DEVICE_IS_PHY)
+		return 0;
+
+	return strcmp(mdiodev->modalias, drv->name) == 0;
+}
+
 struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr)
 {
 	struct mdio_device *mdiodev;
include/linux/mdio.h +3 -0
index 55a80d73cfc1..ca08ab16ecdc 100644
@@ -10,6 +10,7 @@
 #define __LINUX_MDIO_H__
 
 #include <uapi/linux/mdio.h>
+#include <linux/mod_devicetable.h>
 
 struct mii_bus;
 
@@ -29,6 +30,7 @@ struct mdio_device {
 
 	const struct dev_pm_ops *pm_ops;
 	struct mii_bus *bus;
+	char modalias[MDIO_NAME_SIZE];
 
 	int (*bus_match)(struct device *dev, struct device_driver *drv);
 	void (*device_free)(struct mdio_device *mdiodev);
@@ -71,6 +73,7 @@ int mdio_device_register(struct mdio_device *mdiodev);
 void mdio_device_remove(struct mdio_device *mdiodev);
 int mdio_driver_register(struct mdio_driver *drv);
 void mdio_driver_unregister(struct mdio_driver *drv);
+int mdio_device_bus_match(struct device *dev, struct device_driver *drv);
 
 static inline bool mdio_phy_id_is_c45(int phy_id)
 {
include/linux/mod_devicetable.h +1 -0
index 8a57f0b1242d..8850fcaf50db 100644
@@ -501,6 +501,7 @@ struct platform_device_id {
 	kernel_ulong_t driver_data;
 };
 
+#define MDIO_NAME_SIZE		32
 #define MDIO_MODULE_PREFIX	"mdio:"
 
 #define MDIO_ID_FMT "%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d"
include/linux/phy.h +19 -0
index 43474f39ef65..8ddef0fb83d0 100644
@@ -877,6 +877,25 @@ void mdio_bus_exit(void);
 
 extern struct bus_type mdio_bus_type;
 
+struct mdio_board_info {
+	const char	*bus_id;
+	char		modalias[MDIO_NAME_SIZE];
+	int		mdio_addr;
+	const void	*platform_data;
+};
+
+#if IS_ENABLED(CONFIG_PHYLIB)
+int mdiobus_register_board_info(const struct mdio_board_info *info,
+				unsigned int n);
+#else
+static inline int mdiobus_register_board_info(const struct mdio_board_info *i,
+					      unsigned int n)
+{
+	return 0;
+}
+#endif
+
+
 /**
  * module_phy_driver() - Helper macro for registering PHY drivers
  * @__phy_drivers: array of PHY drivers to register
Signature · 1 line
2.9.3
maintainer
#4 lore raw

Re: [PATCH net-next v5 3/4] net: phy: Allow pre-declaration of MDIO devices

Quoted 9 lines
include/linux/mod_devicetable.h +1 -0
index 8a57f0b1242d..8850fcaf50db 100644
@@ -501,6 +501,7 @@ struct platform_device_id {
 	kernel_ulong_t driver_data;
 };
 
+#define MDIO_NAME_SIZE		32

...

include/linux/mod_devicetable.h

Quoted 4 lines
include/linux/mod_devicetable.h +4 -0
+struct mdio_board_info {
+	const char	*bus_id;
+	char		modalias[MDIO_NAME_SIZE];
+

I think it might be better to use MII_BUS_ID_SIZE. These are all related, so using one define should avoid surprise buffer overruns, truncation's.

Andrew

#5 lore raw

Re: [PATCH net-next v5 3/4] net: phy: Allow pre-declaration of MDIO devices

Quoted 12 lines · Andrew Lunn
Quoted 9 lines
include/linux/mod_devicetable.h +1 -0
index 8a57f0b1242d..8850fcaf50db 100644
@@ -501,6 +501,7 @@ struct platform_device_id {
 	kernel_ulong_t driver_data;
 };
 
+#define MDIO_NAME_SIZE		32

...

Quoted 8 lines

include/linux/mod_devicetable.h

Quoted 4 lines
include/linux/mod_devicetable.h +4 -0
+struct mdio_board_info {
+	const char	*bus_id;
+	char		modalias[MDIO_NAME_SIZE];
+

I think it might be better to use MII_BUS_ID_SIZE. These are all related, so using one define should avoid surprise buffer overruns, truncation's.

I considered doing that, but left it that way because I valued the "const" qualifier more than running out of buffer space. What I could do though, is change the strcmp() in drivers/net/phy/mdio-boardinfo.c to be bound by MII_BUS_ID_SIZE.

Signature · 1 line
Florian
maintainer
#6 lore raw

Re: [PATCH net-next v5 3/4] net: phy: Allow pre-declaration of MDIO devices

In reply to Florian Fainelli
Quoted 17 lines
drivers/net/phy/mdio-boardinfo.c new file +17 -0
+/**
+ * mdio_register_board_info - register MDIO devices for a given board
+ * @info: array of devices descriptors
+ * @n: number of descriptors provided
+ * Context: can sleep
+ *
+ * The board info passed can be marked with __initdata but be pointers
+ * such as platform_data etc. are copied as-is
+ */
+int mdiobus_register_board_info(const struct mdio_board_info *info,
+				unsigned int n)
+{
+	struct mdio_board_entry *be;
+	unsigned int i;
+
+	be = kcalloc(n, sizeof(*be), GFP_KERNEL);
+	if (!be)

drivers/net/phy/mdio-boardinfo.c line 85

Quoted 10 lines
drivers/net/phy/mdio-boardinfo.c new file +10 -0
+		return -ENOMEM;
+
+	for (i = 0; i < n; i++, be++, info++) {
+		memcpy(&be->board_info, info, sizeof(*info));
+		mutex_lock(&mdio_board_lock);
+		list_add_tail(&be->list, &mdio_board_list);
+		mutex_unlock(&mdio_board_lock);
+	}
+
+	return 0;

Hi Florian

I've recently been playing with a hot-pluggable SPI bus controller. It is a USB device, hence can come and go. On the SPI bus i have an SRAM. On order to instantiate the MTD device, i need SPI board info. I cannot add the board info until after the SPI bus master appears, since i need to know its ID to fill in the board info. At the moment, i have udev script which when the SPI bus master appears loads a little kernel module which registers the board info.

Such a scheme will not work here. You need to iterate the list of MDIO devices at the end of mdiobus_register_board_info() to see if the just registered board info applies to any existing MDIO bus.

I don't think we yet have any hardware which would do this. But there have been patches to one of the USB-Ethernet dongles to allow it run without a PHY. My guess is, to allow an SFP module. But it is not too big a step for somebody to make a USB attached Ethernet switch.

Maybe consider adding this functionality? Also an unregister call?

Andrew

#7 lore raw

Re: [PATCH net-next v5 3/4] net: phy: Allow pre-declaration of MDIO devices

Quoted 38 lines · Andrew Lunn
Quoted 17 lines
drivers/net/phy/mdio-boardinfo.c new file +17 -0
+/**
+ * mdio_register_board_info - register MDIO devices for a given board
+ * @info: array of devices descriptors
+ * @n: number of descriptors provided
+ * Context: can sleep
+ *
+ * The board info passed can be marked with __initdata but be pointers
+ * such as platform_data etc. are copied as-is
+ */
+int mdiobus_register_board_info(const struct mdio_board_info *info,
+				unsigned int n)
+{
+	struct mdio_board_entry *be;
+	unsigned int i;
+
+	be = kcalloc(n, sizeof(*be), GFP_KERNEL);
+	if (!be)

drivers/net/phy/mdio-boardinfo.c line 85

Quoted 10 lines
drivers/net/phy/mdio-boardinfo.c new file +10 -0
+		return -ENOMEM;
+
+	for (i = 0; i < n; i++, be++, info++) {
+		memcpy(&be->board_info, info, sizeof(*info));
+		mutex_lock(&mdio_board_lock);
+		list_add_tail(&be->list, &mdio_board_list);
+		mutex_unlock(&mdio_board_lock);
+	}
+
+	return 0;

Hi Florian

I've recently been playing with a hot-pluggable SPI bus controller. It is a USB device, hence can come and go. On the SPI bus i have an SRAM. On order to instantiate the MTD device, i need SPI board info. I cannot add the board info until after the SPI bus master appears, since i need to know its ID to fill in the board info. At the moment, i have udev script which when the SPI bus master appears loads a little kernel module which registers the board info.

Quoted 3 lines

Such a scheme will not work here. You need to iterate the list of MDIO devices at the end of mdiobus_register_board_info() to see if the just registered board info applies to any existing MDIO bus.

I was thinking when mdio_device_register() is called, see if there is a matching board info for it, and if so, assign its platform_data accordingly. In the case where mdiobus_register_with_board

Quoted 7 lines

I don't think we yet have any hardware which would do this. But there have been patches to one of the USB-Ethernet dongles to allow it run without a PHY. My guess is, to allow an SFP module. But it is not too big a step for somebody to make a USB attached Ethernet switch.

Maybe consider adding this functionality? Also an unregister call?

Sure, makes sense.

Signature · 1 line
Florian
#8 lore raw

PATCH v5 4/4 ARM: orion: Register DSA switch as a MDIO device

In reply to Florian Fainelli

Utilize the ability to pass board specific MDIO bus information towards a particular MDIO device thus allowing us to provide the per-port switch layout to the Marvell 88E6XXX switch driver.

Since we would end-up with conflicting registration paths, do not register the "dsa" platform device anymore.

Note that the MDIO devices registered by code in net/dsa/dsa2.c does not parse a dsa_platform_data, but directly take a dsa_chip_data (specific to a single switch chip), so we update the different call sites to pass this structure down to orion_ge00_switch_init().

---
 arch/arm/mach-orion5x/common.c               |  2 +-
 arch/arm/mach-orion5x/common.h               |  4 ++--
 arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c |  7 +------
 arch/arm/mach-orion5x/rd88f5181l-ge-setup.c  |  7 +------
 arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c |  7 +------
 arch/arm/mach-orion5x/wnr854t-setup.c        |  2 +-
 arch/arm/mach-orion5x/wrt350n-v2-setup.c     |  7 +------
 arch/arm/plat-orion/common.c                 | 25 +++++++++++++++++++------
 arch/arm/plat-orion/include/plat/common.h    |  4 ++--
 9 files changed, 29 insertions(+), 36 deletions(-)
arch/arm/mach-orion5x/common.c +1 -1
index 04910764c385..83a7ec4c16d0 100644
@@ -105,7 +105,7 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
-void __init orion5x_eth_switch_init(struct dsa_platform_data *d)
+void __init orion5x_eth_switch_init(struct dsa_chip_data *d)
 {
 	orion_ge00_switch_init(d);
 }
arch/arm/mach-orion5x/common.h +2 -2
index 8a4115bd441d..efeffc6b4ebb 100644
@@ -3,7 +3,7 @@
 
 #include <linux/reboot.h>
 
-struct dsa_platform_data;
+struct dsa_chip_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
@@ -41,7 +41,7 @@ void orion5x_setup_wins(void);
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
 void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
-void orion5x_eth_switch_init(struct dsa_platform_data *d);
+void orion5x_eth_switch_init(struct dsa_chip_data *d);
 void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
 void orion5x_spi_init(void);
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +1 -6
index dccadf68ea2b..a3c1336d30c9 100644
@@ -101,11 +101,6 @@ static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
 	.port_names[7]	= "lan3",
 };
 
-static struct dsa_platform_data __initdata rd88f5181l_fxo_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &rd88f5181l_fxo_switch_chip_data,
-};
-
 static void __init rd88f5181l_fxo_init(void)
 {
 	/*
@@ -120,7 +115,7 @@ static void __init rd88f5181l_fxo_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data);
+	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_chip_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +1 -6
index affe5ec825de..252efe29bd1a 100644
@@ -102,11 +102,6 @@ static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
 	.port_names[7]	= "lan3",
 };
 
-static struct dsa_platform_data __initdata rd88f5181l_ge_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &rd88f5181l_ge_switch_chip_data,
-};
-
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
 	I2C_BOARD_INFO("ds1338", 0x68),
 };
@@ -125,7 +120,7 @@ static void __init rd88f5181l_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data);
+	orion5x_eth_switch_init(&rd88f5181l_ge_switch_chip_data);
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +1 -6
index 67ee8571b03c..f4f1dbe1d91d 100644
@@ -40,11 +40,6 @@ static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
 	.port_names[5]	= "cpu",
 };
 
-static struct dsa_platform_data __initdata rd88f6183ap_ge_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &rd88f6183ap_ge_switch_chip_data,
-};
-
 static struct mtd_partition rd88f6183ap_ge_partitions[] = {
 	{
 		.name	= "kernel",
@@ -89,7 +84,7 @@ static void __init rd88f6183ap_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data);
+	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_chip_data);
 	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
 				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
 	orion5x_spi_init();
arch/arm/mach-orion5x/wnr854t-setup.c +1 -1
index 4dbcdbe1de7c..ac3376fc269f 100644
@@ -124,7 +124,7 @@ static void __init wnr854t_init(void)
 	 * Configure peripherals.
 	 */
 	orion5x_eth_init(&wnr854t_eth_data);
-	orion5x_eth_switch_init(&wnr854t_switch_plat_data);
+	orion5x_eth_switch_init(&wnr854t_switch_chip_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
arch/arm/mach-orion5x/wrt350n-v2-setup.c +1 -6
index a6a8c4648d74..9250bb2e429c 100644
@@ -191,11 +191,6 @@ static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
 	.port_names[7]	= "lan4",
 };
 
-static struct dsa_platform_data __initdata wrt350n_v2_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &wrt350n_v2_switch_chip_data,
-};
-
 static void __init wrt350n_v2_init(void)
 {
 	/*
@@ -210,7 +205,7 @@ static void __init wrt350n_v2_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&wrt350n_v2_eth_data);
-	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data);
+	orion5x_eth_switch_init(&wrt350n_v2_switch_chip_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
arch/arm/plat-orion/common.c +19 -6
index 272f49b2c68f..9255b6d67ba5 100644
@@ -22,6 +22,7 @@
 #include <linux/platform_data/dma-mv_xor.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/common.h>
+#include <linux/phy.h>
 
 /* Create a clkdev entry for a given device/clk */
 void __init orion_clkdev_add(const char *con_id, const char *dev_id,
@@ -470,15 +471,27 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
-void __init orion_ge00_switch_init(struct dsa_platform_data *d)
+static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii";
+static __initdata struct mdio_board_info
+		  orion_ge00_switch_board_info;
+
+void __init orion_ge00_switch_init(struct dsa_chip_data *d)
 {
-	int i;
+	struct mdio_board_info *bd;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
+		if (!strcmp(d->port_names[i], "cpu"))
+			break;
 
-	d->netdev = &orion_ge00.dev;
-	for (i = 0; i < d->nr_chips; i++)
-		d->chip[i].host_dev = &orion_ge_mvmdio.dev;
+	bd = &orion_ge00_switch_board_info;
+	bd->bus_id = orion_ge00_mvmdio_bus_name;
+	bd->mdio_addr = d->sw_addr;
+	d->netdev[i] = &orion_ge00.dev;
+	strcpy(bd->modalias, "mv88e6085");
+	bd->platform_data = d;
 
-	platform_device_register_data(NULL, "dsa", 0, d, sizeof(d));
+	mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
 }
 
 /*****************************************************************************
arch/arm/plat-orion/include/plat/common.h +2 -2
index 9347f3c58a6d..3647d3b33c20 100644
@@ -12,7 +12,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 
-struct dsa_platform_data;
+struct dsa_chip_data;
 struct mv_sata_platform_data;
 
 void __init orion_uart0_init(void __iomem *membase,
@@ -57,7 +57,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq);
 
-void __init orion_ge00_switch_init(struct dsa_platform_data *d);
+void __init orion_ge00_switch_init(struct dsa_chip_data *d);
 
 void __init orion_i2c_init(unsigned long mapbase,
 			   unsigned long irq,
Signature · 1 line
2.9.3