Skip to contentSkip to conversation

net: mvneta: implement .set_wol and .get_wol

PATCH Applied Jisheng Zhang 3 participants 3 messages Feb 6, 2017

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 net: mvneta: implement .set_wol and .get_wol

From: Jingju Hou <[email protected]>

The mvneta itself does not support WOL, but the PHY might. So pass the calls to the PHY

---
since v4:
- address Andrew Lunn's comment

since v3:
- really fix the build error

since v2,v1:
- using phy_dev member in struct net_device
- add commit msg

 drivers/net/ethernet/marvell/mvneta.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
drivers/net/ethernet/marvell/mvneta.c +21 -0
index de6c47744b8e..0f4d1697be46 100644
@@ -3927,6 +3927,25 @@ static int mvneta_ethtool_get_rxfh(struct net_device *dev, u32 *indir, u8 *key,
 	return 0;
 }
 
+static void mvneta_ethtool_get_wol(struct net_device *dev,
+				   struct ethtool_wolinfo *wol)
+{
+	wol->supported = 0;
+	wol->wolopts = 0;
+
+	if (dev->phydev)
+		phy_ethtool_get_wol(dev->phydev, wol);
+}
+
+static int mvneta_ethtool_set_wol(struct net_device *dev,
+				  struct ethtool_wolinfo *wol)
+{
+	if (!dev->phydev)
+		return -EOPNOTSUPP;
+
+	return phy_ethtool_set_wol(dev->phydev, wol);
+}
+
 static const struct net_device_ops mvneta_netdev_ops = {
 	.ndo_open            = mvneta_open,
 	.ndo_stop            = mvneta_stop,
@@ -3956,6 +3975,8 @@ const struct ethtool_ops mvneta_eth_tool_ops = {
 	.set_rxfh	= mvneta_ethtool_set_rxfh,
 	.get_link_ksettings = phy_ethtool_get_link_ksettings,
 	.set_link_ksettings = mvneta_ethtool_set_link_ksettings,
+	.get_wol        = mvneta_ethtool_get_wol,
+	.set_wol        = mvneta_ethtool_set_wol,
 };
 
 /* Initialize hw */
Signature · 1 line
2.11.0