Add preliminary support for Banana Pi M2U.
Subsystems (2)
PATCH 1/1 Add preliminary support for Banana Pi M2U.
This adds preliminary support for Banana Pi M2U (and R40).
Unfortunately, I get the following error message in the end:
binman: Device tree 'u-boot.dtb' does not have a 'binman' node Makefile:1091: recipe for target 'u-boot-sunxi-with-spl.bin' failed
make: *** [u-boot-sunxi-with-spl.bin] Error 1
The documentation says that it would also check for "binman" nodes in:
* <CONFIG_SYS_SOC>-u-boot.dtsi
* <CONFIG_SYS_CPU>-u-boot.dtsi
* <CONFIG_SYS_VENDOR>-u-boot.dtsi
* u-boot.dtsi
in that order.
The file "sunxi-u-boot.dtsi" would have contained a binman node.
When I enable debugging I see:
scripts/Makefile.lib:177: u_boot_dtsi_options: ./arch/arm/dts/sunxi-u-boot.dtsi
However:
$ grep -r sunxi-u-bo .
./arch/arm/dts/.sun8i-r40-bananapi-m2u.dtb.cmd:cmd_arch/arm/dts/sun8i-r40-bananapi-m2u.dtb := mkdir -p arch/arm/dts/ ; cat arch/arm/dts/sun8i-r40-bananapi-m2u.dts | sed '/^\/ {$$/{x;s%$$%\#include \"./arch/arm/dts/sunxi-u-boot.dtsi\"%;G;}' | gcc -E -Wp,-MD,arch/arm/dts/.sun8i-r40-bananapi-m2u.dtb.d.pre.tmp -nostdinc -I./arch/arm/dts -I./arch/arm/dts/include -Iinclude -I./include -I./arch/arm/include -include ./include/linux/kconfig.h -D__ASSEMBLY__ -undef -D__DTS__ -x assembler-with-cpp -o arch/arm/dts/.sun8i-r40-bananapi-m2u.dtb.dts.tmp - ; dtc -O dtb -o arch/arm/dts/sun8i-r40-bananapi-m2u.dtb -b 0 -i arch/arm/dts/ -d arch/arm/dts/.sun8i-r40-bananapi-m2u.dtb.d.dtc.tmp arch/arm/dts/.sun8i-r40-bananapi-m2u.dtb.dts.tmp ; cat arch/arm/dts/.sun8i-r40-bananapi-m2u.dtb.d.pre.tmp arch/arm/dts/.sun8i-r40-bananapi-m2u.dtb.d.dtc.tmp > arch/arm/dts/.sun8i-r40-bananapi-m2u.dtb.dWhat's up with it?
--- arch/arm/dts/sun8i-r40-bananapi-m2u.dts | 41 + arch/arm/dts/sun8iw11p1-clk.dtsi | 741 +++++++++++++ arch/arm/dts/sun8iw11p1-pinctrl.dtsi | 673 +++++++++++ arch/arm/dts/sun8iw11p1.dtsi | 1842 +++++++++++++++++++++++++++++++ configs/BananapiM2U_defconfig | 24 + 5 files changed, 3321 insertions(+) create mode 100644 arch/arm/dts/sun8i-r40-bananapi-m2u.dts create mode 100644 arch/arm/dts/sun8iw11p1-clk.dtsi create mode 100644 arch/arm/dts/sun8iw11p1-pinctrl.dtsi create mode 100644 arch/arm/dts/sun8iw11p1.dtsi create mode 100644 configs/BananapiM2U_defconfig
arch/arm/dts/sun8i-r40-bananapi-m2u.dts new file +41 -0
@@ -0,0 +1,41 @@ +/* + * Allwinner Technology CO., Ltd. sun8iw11p1 perf1 sata board. + * + */ + +/dts-v1/; + +/memreserve/ 0x78000000 0x08000000; /* ion carvout heap revserve : [0x78000000~0x80000000], size = 128M */ + +#include "sun8iw11p1.dtsi" + +/{ + model = "Banana Pi M2 Ultra"; + compatible = "sinovoip,bpi-m2u", "allwinner,sun8i-r40"; + + soc at 01c00000 { + }; + + ion { + carvout{ + type = <2>; + name = "carvout"; + base = <0x78000000>; + size = <0x08000000>; + }; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +};
arch/arm/dts/sun8iw11p1-clk.dtsi new file +741 -0
741 lines not on this page · raw message
arch/arm/dts/sun8iw11p1-pinctrl.dtsi new file +673 -0
673 lines not on this page · raw message
arch/arm/dts/sun8iw11p1.dtsi new file +1842 -0
1,545 lines not on this page · raw message
configs/BananapiM2U_defconfig new file +24 -0
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.10.2
Part of the diff is not shown here. View the raw message.