Skip to contentSkip to conversation

mtd: nand: sunxi: Perfs improvements

PATCH New Boris Brezillon 1 participant 5 messages Jan 6, 2017 – Feb 6, 2017

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover mtd: nand: sunxi: Perfs improvements

Hello,

These 3 patches aims at improving the sunxi NAND driver perfs and avoiding busy waits on long operations to improve system reactivity.

Regards,

Boris

Boris Brezillon (3):
mtd: nand: sunxi: Fix the non-polling case in sunxi_nfc_wait_events()
mtd: nand: sunxi: Stop using polling mode when waiting for long
operations
mtd: nand: sunxi: Improve sunxi_nfc_cmd_ctrl()

 drivers/mtd/nand/sunxi_nand.c | 36 ++++++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 10 deletions(-)
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/3 mtd: nand: sunxi: Fix the non-polling case in sunxi_nfc_wait_events()

wait_for_completion_timeout() returns 0 if a timeout occurred, 1 otherwise. Fix the sunxi_nfc_wait_events() accordingly.

---
 drivers/mtd/nand/sunxi_nand.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/mtd/nand/sunxi_nand.c +4 -0
index e40482a65de6..ba78e13a3570 100644
@@ -321,6 +321,10 @@ static int sunxi_nfc_wait_events(struct sunxi_nfc *nfc, u32 events,
 
 		ret = wait_for_completion_timeout(&nfc->complete,
 						msecs_to_jiffies(timeout_ms));
+		if (!ret)
+			ret = -ETIMEDOUT;
+		else
+			ret = 0;
 
 		writel(0, nfc->regs + NFC_REG_INT);
 	} else {
Signature · 1 line
2.7.4
#2 lore raw

PATCH 2/3 mtd: nand: sunxi: Stop using polling mode when waiting for long operations

In reply to Boris Brezillon

Some operations, like read/write an entire page of data with the ECC engine enabled, are known to take a lot of time. Use the interrupt-based waiting mode in these situation.

---
 drivers/mtd/nand/sunxi_nand.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)
drivers/mtd/nand/sunxi_nand.c +18 -6
index ba78e13a3570..76449f79d4c5 100644
@@ -522,6 +522,8 @@ static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 	u32 tmp;
 
 	while (len > offs) {
+		bool poll = false;
+
 		cnt = min(len - offs, NFC_SRAM_SIZE);
 
 		ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
@@ -532,7 +534,11 @@ static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 		tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD;
 		writel(tmp, nfc->regs + NFC_REG_CMD);
 
-		ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+		/* Arbitrary limit for polling mode */
+		if (cnt < 64)
+			poll = true;
+
+		ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, poll, 0);
 		if (ret)
 			break;
 
@@ -555,6 +561,8 @@ static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
 	u32 tmp;
 
 	while (len > offs) {
+		bool poll = false;
+
 		cnt = min(len - offs, NFC_SRAM_SIZE);
 
 		ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
@@ -567,7 +575,11 @@ static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
 		      NFC_ACCESS_DIR;
 		writel(tmp, nfc->regs + NFC_REG_CMD);
 
-		ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+		/* Arbitrary limit for polling mode */
+		if (cnt < 64)
+			poll = true;
+
+		ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, poll, 0);
 		if (ret)
 			break;
 
@@ -961,7 +973,7 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
 	writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ECC_OP,
 	       nfc->regs + NFC_REG_CMD);
 
-	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
 	sunxi_nfc_randomizer_disable(mtd);
 	if (ret)
 		return ret;
@@ -1073,7 +1085,7 @@ static int sunxi_nfc_hw_ecc_read_chunks_dma(struct mtd_info *mtd, uint8_t *buf,
 	writel(NFC_PAGE_OP | NFC_DATA_SWAP_METHOD | NFC_DATA_TRANS,
 	       nfc->regs + NFC_REG_CMD);
 
-	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
 	if (ret)
 		dmaengine_terminate_all(nfc->dmac);
 
@@ -1193,7 +1205,7 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
 	       NFC_ACCESS_DIR | NFC_ECC_OP,
 	       nfc->regs + NFC_REG_CMD);
 
-	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
 	sunxi_nfc_randomizer_disable(mtd);
 	if (ret)
 		return ret;
@@ -1432,7 +1444,7 @@ static int sunxi_nfc_hw_ecc_write_page_dma(struct mtd_info *mtd,
 	       NFC_DATA_TRANS | NFC_ACCESS_DIR,
 	       nfc->regs + NFC_REG_CMD);
 
-	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+	ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
 	if (ret)
 		dmaengine_terminate_all(nfc->dmac);
 
Signature · 1 line
2.7.4
#3 lore raw

PATCH 3/3 mtd: nand: sunxi: Improve sunxi_nfc_cmd_ctrl()

In reply to Boris Brezillon

We only need to call sunxi_nfc_wait_cmd_fifo_empty() if we want to send a new command. Move the sunxi_nfc_wait_cmd_fifo_empty() call to right place to avoid extra register reads.

---
 drivers/mtd/nand/sunxi_nand.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/mtd/nand/sunxi_nand.c +4 -4
index 76449f79d4c5..0eeeb8b889ea 100644
@@ -604,10 +604,6 @@ static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat,
 	struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
 	int ret;
 
-	ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
-	if (ret)
-		return;
-
 	if (dat == NAND_CMD_NONE && (ctrl & NAND_NCE) &&
 	    !(ctrl & (NAND_CLE | NAND_ALE))) {
 		u32 cmd = 0;
@@ -637,6 +633,10 @@ static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat,
 			writel(sunxi_nand->addr[1],
 			       nfc->regs + NFC_REG_ADDR_HIGH);
 
+		ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
+		if (ret)
+			return;
+
 		writel(cmd, nfc->regs + NFC_REG_CMD);
 		sunxi_nand->addr[0] = 0;
 		sunxi_nand->addr[1] = 0;
Signature · 1 line
2.7.4
author Applied
#4 lore raw

cover mtd: nand: sunxi: Perfs improvements

In reply to Boris Brezillon
Quoted 4 lines · On Fri, 6 Jan 2017 10:42:04 +0100 Boris Brezillon…

Hello,

These 3 patches aims at improving the sunxi NAND driver perfs and avoiding busy waits on long operations to improve system reactivity.

Applied.

Quoted 14 lines

Regards,

Boris

Boris Brezillon (3):
mtd: nand: sunxi: Fix the non-polling case in sunxi_nfc_wait_events()
mtd: nand: sunxi: Stop using polling mode when waiting for long
operations
mtd: nand: sunxi: Improve sunxi_nfc_cmd_ctrl()

 drivers/mtd/nand/sunxi_nand.c | 36 ++++++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 10 deletions(-)