Skip to contentSkip to conversation

cmd: add "config" command, rework "license" command

PATCH New Masahiro Yamada 4 participants 14 messages Jan 30, 2017 – Feb 9, 2017 Kbuild

lore
Share & tools
lore
#0 lore raw

v2 cover cmd: add "config" command, rework "license" command

Changes in v2:
- Fix a typo in git-log. bin2header -> bin2c

Masahiro Yamada (3):
scripts: import bin2c.c from Linux 4.10-rc6
cmd: add a new command "config" to show .config contents
cmd: rework "license" command

 Kconfig            |  2 ++
 Makefile           | 14 ++++++++------
 cmd/.gitignore     |  6 ++++++
 cmd/Kconfig        | 13 +++++++++++++
 cmd/Makefile       | 37 +++++++++++++++++++++++++++++++++++++
 cmd/config.c       | 44 ++++++++++++++++++++++++++++++++++++++++++++
 cmd/license.c      | 31 ++++++++++++++++++-------------
 include/.gitignore |  1 -
 scripts/.gitignore |  1 +
 scripts/Kconfig    |  2 ++
 scripts/Makefile   |  4 ++++
 scripts/bin2c.c    | 36 ++++++++++++++++++++++++++++++++++++
 tools/Makefile     | 11 +----------
 tools/bin2header.c | 41 -----------------------------------------
 14 files changed, 172 insertions(+), 71 deletions(-)
 create mode 100644 cmd/.gitignore
 create mode 100644 cmd/config.c
 create mode 100644 scripts/Kconfig
 create mode 100644 scripts/bin2c.c
 delete mode 100644 tools/bin2header.c
Signature · 1 line
2.7.4
#1 lore raw

PATCH v2 1/3 scripts: import bin2c.c from Linux 4.10-rc6

Import scripts/basic/bin2c.c of Linux.

In Linux Kernel, this file was moved to scripts/basic directory by commit 8370edea81e3 ("bin2c: move bin2c in scripts/basic").

In U-boot, we do not need to follow that commit. Just put it in the original directory "scripts".

---

Changes in v2:
- Fix a typo in git-log. bin2header -> bin2c

 scripts/bin2c.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 scripts/bin2c.c
scripts/bin2c.c new file +36 -0
new file mode 100644
index 0000000..c3d7eef
@@ -0,0 +1,36 @@
+/*
+ * Unloved program to convert a binary on stdin to a C include on stdout
+ *
+ * Jan 1999 Matt Mackall <[email protected]>
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ */
+
+#include <stdio.h>
+
+int main(int argc, char *argv[])
+{
+	int ch, total = 0;
+
+	if (argc > 1)
+		printf("const char %s[] %s=\n",
+			argv[1], argc > 2 ? argv[2] : "");
+
+	do {
+		printf("\t\"");
+		while ((ch = getchar()) != EOF) {
+			total++;
+			printf("\\x%02x", ch);
+			if (total % 16 == 0)
+				break;
+		}
+		printf("\"\n");
+	} while (ch != EOF);
+
+	if (argc > 1)
+		printf("\t;\n\n#include <linux/types.h>\n\nconst size_t %s_size = %d;\n",
+		       argv[1], total);
+
+	return 0;
+}
Signature · 1 line
2.7.4
#2 lore raw

PATCH v2 1/3 scripts: import bin2c.c from Linux 4.10-rc6

Quoted 9 lines · Masahiro Yamada

Import scripts/basic/bin2c.c of Linux.

In Linux Kernel, this file was moved to scripts/basic directory by commit 8370edea81e3 ("bin2c: move bin2c in scripts/basic").

In U-boot, we do not need to follow that commit. Just put it in the original directory "scripts".

Quoted 8 lines

---

Changes in v2:
- Fix a typo in git-log. bin2header -> bin2c

 scripts/bin2c.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 scripts/bin2c.c
#3 lore raw

PATCH v2 1/3 scripts: import bin2c.c from Linux 4.10-rc6

In reply to Masahiro Yamada
Quoted 6 lines · Masahiro Yamada

Import scripts/basic/bin2c.c of Linux.

In Linux Kernel, this file was moved to scripts/basic directory by commit 8370edea81e3 ("bin2c: move bin2c in scripts/basic").

In U-boot, we do not need to follow that commit. Just put it in the

Sorry for jumping out late, but one nits:

U-boot -> U-Boot

Quoted 12 lines

original directory "scripts".

---

Changes in v2:
- Fix a typo in git-log. bin2header -> bin2c

 scripts/bin2c.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 scripts/bin2c.c

[snip]

Regards,
Bin

#4 lore raw

PATCH v2 1/3 scripts: import bin2c.c from Linux 4.10-rc6

Hi Bin,

2017-02-07 11:38 GMT+09:00 Bin Meng <[email protected]>:

Quoted 4 lines
Quoted 2 lines · Masahiro Yamada

Import scripts/basic/bin2c.c of Linux.

Quoted 8 lines
Quoted 4 lines

In Linux Kernel, this file was moved to scripts/basic directory by commit 8370edea81e3 ("bin2c: move bin2c in scripts/basic").

In U-boot, we do not need to follow that commit. Just put it in the

Sorry for jumping out late, but one nits:

U-boot -> U-Boot

Thanks for pointing this out.

Tom,
Could you fix s/U-boot/U-Boot/ when this patch is applied, please?

Signature · 2 lines
Best Regards
Masahiro Yamada
#5 lore raw

PATCH v2 1/3 scripts: import bin2c.c from Linux 4.10-rc6

Quoted 14 lines · Masahiro Yamada

Hi Bin,

2017-02-07 11:38 GMT+09:00 Bin Meng <[email protected]>:

Quoted 11 lines
Quoted 6 lines · Masahiro Yamada

Import scripts/basic/bin2c.c of Linux.

In Linux Kernel, this file was moved to scripts/basic directory by commit 8370edea81e3 ("bin2c: move bin2c in scripts/basic").

In U-boot, we do not need to follow that commit. Just put it in the

Sorry for jumping out late, but one nits:

Quoted 7 lines
Quoted 1 line

U-boot -> U-Boot

Thanks for pointing this out.

Tom,
Could you fix s/U-boot/U-Boot/ when this patch is applied, please?

I'll endeavor to remember :)

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170207/a5ebb5cf/attachment.sig>
#6 lore raw

PATCH v2 1/3 scripts: import bin2c.c from Linux 4.10-rc6

In reply to Masahiro Yamada
Quoted 10 lines · Masahiro Yamada

Import scripts/basic/bin2c.c of Linux.

In Linux Kernel, this file was moved to scripts/basic directory by commit 8370edea81e3 ("bin2c: move bin2c in scripts/basic").

In U-Boot, we do not need to follow that commit. Just put it in the original directory "scripts".

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170208/070b5040/attachment.sig>
#7 lore raw

PATCH v2 2/3 cmd: add a new command "config" to show .config contents

In reply to Masahiro Yamada

This feature is inspired by /proc/config.gz of Linux. In Linux, if CONFIG_IKCONFIG is enabled, the ".config" file contents are embedded in the kernel image. If CONFIG_IKCONFIG_PROC is also enabled, the ".config" contents are exposed to /proc/config.gz. Users can do "zcat /proc/config.gz" to check which config options are enabled on the running kernel image.

The idea is almost the same here; if CONFIG_CMD_CONFIG is enabled, the ".config" contents are compressed and saved in the U-Boot image, then printed by the new command "config".

The usage is quite simple. Enable CONFIG_CMD_CONFIG, then run

Quoted 1 line

config

from the command line interface. The ".config" contents will be printed on the console.

This feature increases the U-Boot image size by about 4KB (this is mostly due to the gzip-compressed .config file). By default, it is enabled only for Sandbox because we do not care about the memory footprint on it. Of course, this feature is architecture agnostic, so you can enable it on any board if the image size increase is acceptable for you.

---

Changes in v2: None

 Kconfig            |  2 ++
 Makefile           | 12 +++++++-----
 cmd/.gitignore     |  3 +++
 cmd/Kconfig        | 12 ++++++++++++
 cmd/Makefile       | 22 ++++++++++++++++++++++
 cmd/config.c       | 44 ++++++++++++++++++++++++++++++++++++++++++++
 scripts/.gitignore |  1 +
 scripts/Kconfig    |  2 ++
 scripts/Makefile   |  4 ++++
 9 files changed, 97 insertions(+), 5 deletions(-)
 create mode 100644 cmd/.gitignore
 create mode 100644 cmd/config.c
 create mode 100644 scripts/Kconfig
Kconfig +2 -0
index 8f9ea97..0dd21df 100644
@@ -325,3 +325,5 @@ source "fs/Kconfig"
 source "lib/Kconfig"
 
 source "test/Kconfig"
+
+source "scripts/Kconfig"
Makefile +7 -5
index 262df7c..fb1ec20 100644
@@ -482,6 +482,13 @@ else
 # Build targets only - this includes vmlinux, arch specific targets, clean
 # targets and others. In general all targets except *config targets.
 
+# Additional helpers built in scripts/
+# Carefully list dependencies so we do not try to build scripts twice
+# in parallel
+PHONY += scripts
+scripts: scripts_basic include/config/auto.conf
+	$(Q)$(MAKE) $(build)=$(@)
+
 ifeq ($(dot-config),1)
 # Read in config
 -include include/config/auto.conf
@@ -1537,11 +1544,6 @@ tests:
 	$(Q)$(MAKE) $(build)=scripts build_docproc
 	$(Q)$(MAKE) $(build)=doc/DocBook $@
 
-# Dummies...
-PHONY += prepare scripts
-prepare: ;
-scripts: ;
-
 endif #ifeq ($(config-targets),1)
 endif #ifeq ($(mixed-targets),1)
 
cmd/.gitignore new file +3 -0
new file mode 100644
index 0000000..7800586
@@ -0,0 +1,3 @@
+config_data.gz
+config_data_gz.h
+config_data_size.h
cmd/Kconfig +12 -0
index 4a0d489..57e8e42 100644
@@ -126,6 +126,18 @@ config CMD_BDI
 	help
 	  Print board info
 
+config CMD_CONFIG
+	bool "config"
+	select BUILD_BIN2C
+	default SANDBOX
+	help
+	  Print ".config" contents.
+
+	  If this option is enabled, the ".config" file contents are embedded
+	  in the U-Boot image and can be printed on the console by the "config"
+	  command.  This provides information of which options are enabled on
+	  the running U-Boot.
+
 config CMD_CONSOLE
 	bool "coninfo"
 	default y
cmd/Makefile +22 -0
index 566fed9..1a04e7e 100644
@@ -31,6 +31,7 @@ obj-$(CONFIG_CMD_BOOTI) += booti.o
 obj-$(CONFIG_CMD_CACHE) += cache.o
 obj-$(CONFIG_CMD_CBFS) += cbfs.o
 obj-$(CONFIG_CMD_CLK) += clk.o
+obj-$(CONFIG_CMD_CONFIG) += config.o
 obj-$(CONFIG_CMD_CONSOLE) += console.o
 obj-$(CONFIG_CMD_CPLBINFO) += cplbinfo.o
 obj-$(CONFIG_CMD_CPU) += cpu.o
@@ -165,3 +166,24 @@ obj-$(CONFIG_CMD_BLOB) += blob.o
 obj-y += nvedit.o
 
 obj-$(CONFIG_ARCH_MVEBU) += mvebu/
+
+filechk_data_gz = (echo "static const char data_gz[] ="; cat $< | scripts/bin2c; echo ";")
+
+filechk_data_size = \
+	(echo "static const size_t data_size = "; \
+	cat $< | wc -c; echo ";")
+
+# "config" command
+$(obj)/config.o: $(obj)/config_data_gz.h $(obj)/config_data_size.h
+
+targets += config_data.gz
+$(obj)/config_data.gz: $(KCONFIG_CONFIG) FORCE
+	$(call if_changed,gzip)
+
+targets += config_data_gz.h
+$(obj)/config_data_gz.h: $(obj)/config_data.gz FORCE
+	$(call filechk,data_gz)
+
+targets += config_data_size.h
+$(obj)/config_data_size.h: $(KCONFIG_CONFIG) FORCE
+	$(call filechk,data_size)
cmd/config.c new file +44 -0

44 lines not on this page · raw message

scripts/.gitignore +1 -0
index 82bc06e..17b903b 100644
@@ -1,4 +1,5 @@
 #
 # Generated files
 #
+bin2c
 docproc
scripts/Kconfig new file +2 -0
new file mode 100644
index 0000000..2a2c18e
@@ -0,0 +1,2 @@
+config BUILD_BIN2C
+	bool
scripts/Makefile +4 -0
index 2f081f7..3e10c16 100644
@@ -7,6 +7,10 @@
 # SPDX-License-Identifier:	GPL-2.0
 #
 
+hostprogs-$(CONFIG_BUILD_BIN2C)		+= bin2c
+
+always		:= $(hostprogs-y)
+
 # The following hostprogs-y programs are only build on demand
 hostprogs-y += docproc
 
Signature · 1 line
2.7.4
#8 lore raw

PATCH v2 2/3 cmd: add a new command "config" to show .config contents

Hi Masahiro,

Quoted 28 lines · Masahiro Yamada

This feature is inspired by /proc/config.gz of Linux. In Linux, if CONFIG_IKCONFIG is enabled, the ".config" file contents are embedded in the kernel image. If CONFIG_IKCONFIG_PROC is also enabled, the ".config" contents are exposed to /proc/config.gz. Users can do "zcat /proc/config.gz" to check which config options are enabled on the running kernel image.

The idea is almost the same here; if CONFIG_CMD_CONFIG is enabled, the ".config" contents are compressed and saved in the U-Boot image, then printed by the new command "config".

The usage is quite simple. Enable CONFIG_CMD_CONFIG, then run

Quoted 1 line

config

from the command line interface. The ".config" contents will be printed on the console.

This feature increases the U-Boot image size by about 4KB (this is mostly due to the gzip-compressed .config file). By default, it is enabled only for Sandbox because we do not care about the memory footprint on it. Of course, this feature is architecture agnostic, so you can enable it on any board if the image size increase is acceptable for you.

---

Changes in v2: None

Quoted 13 lines
 Kconfig            |  2 ++
 Makefile           | 12 +++++++-----
 cmd/.gitignore     |  3 +++
 cmd/Kconfig        | 12 ++++++++++++
 cmd/Makefile       | 22 ++++++++++++++++++++++
 cmd/config.c       | 44 ++++++++++++++++++++++++++++++++++++++++++++
 scripts/.gitignore |  1 +
 scripts/Kconfig    |  2 ++
 scripts/Makefile   |  4 ++++
 9 files changed, 97 insertions(+), 5 deletions(-)
 create mode 100644 cmd/.gitignore
 create mode 100644 cmd/config.c
 create mode 100644 scripts/Kconfig

But I wonder why we shouldn't use a mechanism like cmd_dt_S_dtb in Makefile.lib to embed the file?

Regards,
Simon

#9 lore raw

PATCH v2 2/3 cmd: add a new command "config" to show .config contents

Hi Simon,

2017-02-07 0:33 GMT+09:00 Simon Glass <[email protected]>:

Quoted 46 lines

Hi Masahiro,

Quoted 28 lines · Masahiro Yamada

This feature is inspired by /proc/config.gz of Linux. In Linux, if CONFIG_IKCONFIG is enabled, the ".config" file contents are embedded in the kernel image. If CONFIG_IKCONFIG_PROC is also enabled, the ".config" contents are exposed to /proc/config.gz. Users can do "zcat /proc/config.gz" to check which config options are enabled on the running kernel image.

The idea is almost the same here; if CONFIG_CMD_CONFIG is enabled, the ".config" contents are compressed and saved in the U-Boot image, then printed by the new command "config".

The usage is quite simple. Enable CONFIG_CMD_CONFIG, then run

Quoted 1 line

config

from the command line interface. The ".config" contents will be printed on the console.

This feature increases the U-Boot image size by about 4KB (this is mostly due to the gzip-compressed .config file). By default, it is enabled only for Sandbox because we do not care about the memory footprint on it. Of course, this feature is architecture agnostic, so you can enable it on any board if the image size increase is acceptable for you.

---

Changes in v2: None

Quoted 13 lines
 Kconfig            |  2 ++
 Makefile           | 12 +++++++-----
 cmd/.gitignore     |  3 +++
 cmd/Kconfig        | 12 ++++++++++++
 cmd/Makefile       | 22 ++++++++++++++++++++++
 cmd/config.c       | 44 ++++++++++++++++++++++++++++++++++++++++++++
 scripts/.gitignore |  1 +
 scripts/Kconfig    |  2 ++
 scripts/Makefile   |  4 ++++
 9 files changed, 97 insertions(+), 5 deletions(-)
 create mode 100644 cmd/.gitignore
 create mode 100644 cmd/config.c
 create mode 100644 scripts/Kconfig
Quoted 4 lines

But I wonder why we shouldn't use a mechanism like cmd_dt_S_dtb in Makefile.lib to embed the file?

I thought of this when I saw the implementation of kernel/configs.c of Linux.

My first guess was, they wanted to implement it in an arch-independent way.

The cmd_dt_S_dtb mechanism also seems (mostly) arch-independent, but I am not 100% sure.

For example, underscore must the added/stripped
for conversion between C and assembly for Blackfin architecture.

One more reason is, I think, kernel/configs.c was added in older days than the Device Tree.

Signature · 2 lines
Best Regards
Masahiro Yamada
#10 lore raw

PATCH v2 2/3 cmd: add a new command "config" to show .config contents

In reply to Masahiro Yamada
Quoted 23 lines · Masahiro Yamada

This feature is inspired by /proc/config.gz of Linux. In Linux, if CONFIG_IKCONFIG is enabled, the ".config" file contents are embedded in the kernel image. If CONFIG_IKCONFIG_PROC is also enabled, the ".config" contents are exposed to /proc/config.gz. Users can do "zcat /proc/config.gz" to check which config options are enabled on the running kernel image.

The idea is almost the same here; if CONFIG_CMD_CONFIG is enabled, the ".config" contents are compressed and saved in the U-Boot image, then printed by the new command "config".

The usage is quite simple. Enable CONFIG_CMD_CONFIG, then run

Quoted 1 line

config

from the command line interface. The ".config" contents will be printed on the console.

This feature increases the U-Boot image size by about 4KB (this is mostly due to the gzip-compressed .config file). By default, it is enabled only for Sandbox because we do not care about the memory footprint on it. Of course, this feature is architecture agnostic, so you can enable it on any board if the image size increase is acceptable for you.

Quoted 2 lines

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170208/9084c70c/attachment.sig>
#11 lore raw

PATCH v2 3/3 cmd: rework "license" command

In reply to Masahiro Yamada

The previous commit ("add a new command to show .config contents") improves the basic infrastructure of "embed a compressed file into the U-Boot image, and print it by a command". The same pattern for the "license" command.

This commit reworks the command to improve the following:

[1] Improve log style

Kbuild style log

  GZIP    cmd/license_data.gz
  CHK     cmd/license_data_gz.h
  UPD     cmd/license_data_gz.h
  CHK     cmd/license_data_size.h
  UPD     cmd/license_data_size.h

instead of the bare Make log:

cat ./Licenses/gpl-2.0.txt | gzip -9 -c | \
tools/bin2header license_gzip > ./include/license.h

[2] Collect related code into the "cmd" directory

Prior to this commit, the license.h was created by tools/Makefile, placed under the "include" directory, included from cmd/license.c, and deleted by the top-level Makefile. It is not a good idea to scatter related code.

[3] Drop the fixed-malloc size LICENSE_MAX

Just allocate the minimum required size of buffer because we know the size of the original gpl-2.0.txt.

[4] Fix more issues

Terminate the buffer with zero to prevent puts() from over-running. Add "static" to do_license.

---

Changes in v2: None

 Makefile           |  2 +-
 cmd/.gitignore     |  3 +++
 cmd/Kconfig        |  1 +
 cmd/Makefile       | 15 +++++++++++++++
 cmd/license.c      | 31 ++++++++++++++++++-------------
 include/.gitignore |  1 -
 tools/Makefile     | 11 +----------
 tools/bin2header.c | 41 -----------------------------------------
 8 files changed, 39 insertions(+), 66 deletions(-)
 delete mode 100644 tools/bin2header.c
Makefile +1 -1
index fb1ec20..00ff9b5 100644
@@ -1423,7 +1423,7 @@ CLEAN_DIRS  += $(MODVERDIR) \
 	       $(foreach d, spl tpl, $(patsubst %,$d/%, \
 			$(filter-out include, $(shell ls -1 $d 2>/dev/null))))
 
-CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h include/license.h \
+CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
 	       boot* u-boot* MLO* SPL System.map
 
 # Directories & files removed with 'make mrproper'
cmd/.gitignore +3 -0
index 7800586..bab889f 100644
@@ -1,3 +1,6 @@
 config_data.gz
 config_data_gz.h
 config_data_size.h
+license_data.gz
+license_data_gz.h
+license_data_size.h
cmd/Kconfig +1 -0
index 57e8e42..25ac895 100644
@@ -154,6 +154,7 @@ config CMD_CPU
 
 config CMD_LICENSE
 	bool "license"
+	select BUILD_BIN2C
 	help
 	  Print GPL license text
 
cmd/Makefile +15 -0
index 1a04e7e..f13bb8c 100644
@@ -187,3 +187,18 @@ $(obj)/config_data_gz.h: $(obj)/config_data.gz FORCE
 targets += config_data_size.h
 $(obj)/config_data_size.h: $(KCONFIG_CONFIG) FORCE
 	$(call filechk,data_size)
+
+# "license" command
+$(obj)/license.o: $(obj)/license_data_gz.h $(obj)/license_data_size.h
+
+targets += license_data.gz
+$(obj)/license_data.gz: $(srctree)/Licenses/gpl-2.0.txt FORCE
+	$(call if_changed,gzip)
+
+targets += license_data_gz.h
+$(obj)/license_data_gz.h: $(obj)/license_data.gz FORCE
+	$(call filechk,data_gz)
+
+targets += license_data_size.h
+$(obj)/license_data_size.h: $(srctree)/Licenses/gpl-2.0.txt FORCE
+	$(call filechk,data_size)
cmd/license.c +18 -13
index 5ee57f8..29fc8aa 100644
@@ -6,31 +6,36 @@
  */
 
 #include <common.h>
-
-/* Licenses/gpl-2.0.txt is currently 18092 bytes in size */
-#define LICENSE_MAX	20480
-
 #include <command.h>
 #include <malloc.h>
-#include <license.h>
 
-int do_license(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+#include "license_data_gz.h"
+#include "license_data_size.h"
+
+static int do_license(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	char *dst = malloc(LICENSE_MAX);
-	unsigned long len = LICENSE_MAX;
+	char *dst;
+	unsigned long len = data_size;
+	int ret = CMD_RET_SUCCESS;
 
+	dst = malloc(data_size + 1);
 	if (!dst)
-		return -1;
+		return CMD_RET_FAILURE;
 
-	if (gunzip(dst, LICENSE_MAX, license_gzip, &len) != 0) {
+	ret = gunzip(dst, data_size, (unsigned char *)data_gz, &len);
+	if (ret) {
 		printf("Error uncompressing license text\n");
-		free(dst);
-		return -1;
+		ret = CMD_RET_FAILURE;
+		goto free;
 	}
+
+	dst[data_size] = 0;
 	puts(dst);
+
+free:
 	free(dst);
 
-	return 0;
+	return ret;
 }
 
 U_BOOT_CMD(
include/.gitignore +0 -1
index 75be527..8e41a95 100644
@@ -2,4 +2,3 @@
 /bmp_logo.h
 /bmp_logo_data.h
 /config.h
-/license.h
tools/Makefile +1 -10
index cefcedf..38ca4cb 100644
@@ -32,7 +32,6 @@ CONFIG_BUILD_ENVCRC ?= $(ENVCRC-y)
 
 hostprogs-$(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER) += atmel_pmecc_params
 
-hostprogs-$(CONFIG_CMD_LICENSE) += bin2header
 hostprogs-$(CONFIG_LCD_LOGO) += bmp_logo
 hostprogs-$(CONFIG_VIDEO_LOGO) += bmp_logo
 HOSTCFLAGS_bmp_logo.o := -pedantic
@@ -229,10 +228,6 @@ endif
 
 endif # !LOGO_BMP
 
-# Generated gziped GPL-2.0 license text
-LICENSE_H = $(objtree)/include/license.h
-LICENSE-$(CONFIG_CMD_LICENSE) += $(LICENSE_H)
-
 #
 # Use native tools and options
 # Define __KERNEL_STRICT_NAMES to prevent typedef overlaps
@@ -247,7 +242,7 @@ HOST_EXTRACFLAGS += -include $(srctree)/include/libfdt_env.h \
 		-D__KERNEL_STRICT_NAMES \
 		-D_GNU_SOURCE
 
-__build:	$(LOGO-y) $(LICENSE-y)
+__build:	$(LOGO-y)
 
 $(LOGO_H):	$(obj)/bmp_logo $(LOGO_BMP)
 	$(obj)/bmp_logo --gen-info $(LOGO_BMP) > $@
@@ -255,10 +250,6 @@ $(LOGO_H):	$(obj)/bmp_logo $(LOGO_BMP)
 $(LOGO_DATA_H):	$(obj)/bmp_logo $(LOGO_BMP)
 	$(obj)/bmp_logo --gen-data $(LOGO_BMP) > $@
 
-$(LICENSE_H): $(obj)/bin2header $(srctree)/Licenses/gpl-2.0.txt
-	cat $(srctree)/Licenses/gpl-2.0.txt | gzip -9 -c | \
-		$(obj)/bin2header license_gzip > $(LICENSE_H)
-
 # Let clean descend into subdirs
 subdir- += env
 
tools/bin2header.c deleted +0 -41

41 lines not on this page · raw message

Signature · 1 line
2.7.4
#12 lore raw

PATCH v2 3/3 cmd: rework "license" command

Quoted 44 lines · Masahiro Yamada

The previous commit ("add a new command to show .config contents") improves the basic infrastructure of "embed a compressed file into the U-Boot image, and print it by a command". The same pattern for the "license" command.

This commit reworks the command to improve the following:

[1] Improve log style

Kbuild style log

  GZIP    cmd/license_data.gz
  CHK     cmd/license_data_gz.h
  UPD     cmd/license_data_gz.h
  CHK     cmd/license_data_size.h
  UPD     cmd/license_data_size.h

instead of the bare Make log:

cat ./Licenses/gpl-2.0.txt | gzip -9 -c | \
tools/bin2header license_gzip > ./include/license.h

[2] Collect related code into the "cmd" directory

Prior to this commit, the license.h was created by tools/Makefile, placed under the "include" directory, included from cmd/license.c, and deleted by the top-level Makefile. It is not a good idea to scatter related code.

[3] Drop the fixed-malloc size LICENSE_MAX

Just allocate the minimum required size of buffer because we know the size of the original gpl-2.0.txt.

[4] Fix more issues

Terminate the buffer with zero to prevent puts() from over-running. Add "static" to do_license.

---

Changes in v2: None

Quoted 10 lines
 Makefile           |  2 +-
 cmd/.gitignore     |  3 +++
 cmd/Kconfig        |  1 +
 cmd/Makefile       | 15 +++++++++++++++
 cmd/license.c      | 31 ++++++++++++++++++-------------
 include/.gitignore |  1 -
 tools/Makefile     | 11 +----------
 tools/bin2header.c | 41 -----------------------------------------
 8 files changed, 39 insertions(+), 66 deletions(-)
 delete mode 100644 tools/bin2header.c

It also drops bin2header.c

#13 lore raw

PATCH v2 3/3 cmd: rework "license" command

In reply to Masahiro Yamada
Quoted 34 lines · Masahiro Yamada

The previous commit ("add a new command to show .config contents") improves the basic infrastructure of "embed a compressed file into the U-Boot image, and print it by a command". The same pattern for the "license" command.

This commit reworks the command to improve the following:

[1] Improve log style

Kbuild style log

  GZIP    cmd/license_data.gz
  CHK     cmd/license_data_gz.h
  UPD     cmd/license_data_gz.h
  CHK     cmd/license_data_size.h
  UPD     cmd/license_data_size.h

instead of the bare Make log:

cat ./Licenses/gpl-2.0.txt | gzip -9 -c | \
tools/bin2header license_gzip > ./include/license.h

[2] Collect related code into the "cmd" directory

Prior to this commit, the license.h was created by tools/Makefile, placed under the "include" directory, included from cmd/license.c, and deleted by the top-level Makefile. It is not a good idea to scatter related code.

[3] Drop the fixed-malloc size LICENSE_MAX

Just allocate the minimum required size of buffer because we know the size of the original gpl-2.0.txt.

Quoted 7 lines

[4] Fix more issues

Terminate the buffer with zero to prevent puts() from over-running. Add "static" to do_license.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170208/1aea0f64/attachment-0001.sig>