drivers: usb: gadget: udc: add missing break in switch
PATCH 1/2 drivers: usb: gadget: udc: add missing break in switch
Add missing break in switch.
Addresses-Coverity-ID: 201385
--- drivers/usb/gadget/udc/mv_udc_core.c | 1 + 1 file changed, 1 insertion(+)
drivers/usb/gadget/udc/mv_udc_core.c +1 -0
@@ -489,6 +489,7 @@ static int mv_ep_enable(struct usb_ep *_ep,break ;case USB_ENDPOINT_XFER_CONTROL : ios =1 ; +break ;case USB_ENDPOINT_XFER_INT : mult =0 ;break ;
Signature · 1 line
2.5.0
PATCH 2/2 drivers: usb: gadget: udc: remove logically dead code
Remove unnecesary code because zlt never evaluates to zero.
Addresses-Coverity-ID: 1226747
--- drivers/usb/gadget/udc/mv_udc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/gadget/udc/mv_udc_core.c +1 -1
@@ -509,7 +509,7 @@ static int mv_ep_enable(struct usb_ep *_ep, dqh = ep->dqh; dqh->max_packet_length = (max <<EP_QUEUE_HEAD_MAX_PKT_LEN_POS ) | (mult <<EP_QUEUE_HEAD_MULT_POS ) - | (zlt ?EP_QUEUE_HEAD_ZLT_SEL :0 ) + |EP_QUEUE_HEAD_ZLT_SEL | (ios ?EP_QUEUE_HEAD_IOS :0 ); dqh->next_dtd_ptr =1 ; dqh->size_ioc_int_sts =0 ;
Signature · 1 line
2.5.0
Hi,
Quoted 13 lines · Gustavo A. R. Silva
Add missing break in switch.
Addresses-Coverity-ID: 201385
Signed-off-by Gustavo A. R. Silva <[email protected]>--- drivers/usb/gadget/udc/mv_udc_core.c | 1 + 1 file changed, 1 insertion(+)drivers/usb/gadget/udc/mv_udc_core.c +0
-0
drivers/usb/gadget/udc/mv_udc_core.c static int mv_ep_enable(struct usb_ep *_ep, · line 492
Quoted 4 lines
drivers/usb/gadget/udc/mv_udc_core.c +1
-0@@ -489,6 +489,7 @@ static int mv_ep_enable(struct usb_ep *_ep,break ;case USB_ENDPOINT_XFER_CONTROL : ios =1 ; +break ;
are you SURE this is supposed to have this break statement? What if we want to initialize mult to 0 *also* for control endpoints? How did you test this? Do you have access to Marvel's documentation for this controller?
Signature · 1 line
balbi
Hello Felipe,
Quoting Felipe Balbi <[email protected]>:
Quoted 11 lines
Hi,
Quoted 8 lines · Gustavo A. R. Silva
Add missing break in switch.
Addresses-Coverity-ID: 201385
Signed-off-by Gustavo A. R. Silva <[email protected]>--- drivers/usb/gadget/udc/mv_udc_core.c | 1 + 1 file changed, 1 insertion(+)
Quoted 15 lines
drivers/usb/gadget/udc/mv_udc_core.c static int mv_ep_enable(struct usb_ep *_ep, · line 492
Quoted 9 lines
drivers/usb/gadget/udc/mv_udc_core.c +1
-0@@ -489,6 +489,7 @@ static int mv_ep_enable(struct usb_ep *_ep,break ;case USB_ENDPOINT_XFER_CONTROL : ios =1 ; +break ;are you SURE this is supposed to have this break statement? What if we want to initialize mult to 0 *also* for control endpoints? How did you test this? Do you have access to Marvel's documentation for this controller?
Certainly I wasn't sure, but I also think this is kind of obscure code. If that is the case that we also want to initialize mult to 0, wouldn't it be clearer (for maintenance purposes) to add mult = 0 and the break statement after ios = 1?
What do you think if I modify that piece of code as follows:
case USB_ENDPOINT_XFER_CONTROL:
ios = 1;
mult = 0;
break;Thank you
--
Gustavo A. R. Silva
Hi,
Quoted 26 lines · Gustavo A. R. Silva
Quoted 9 lines
Quoted 8 lines · Gustavo A. R. Silva
Add missing break in switch.
Addresses-Coverity-ID: 201385
Signed-off-by Gustavo A. R. Silva <[email protected]>--- drivers/usb/gadget/udc/mv_udc_core.c | 1 + 1 file changed, 1 insertion(+)Quoted 16 lines
drivers/usb/gadget/udc/mv_udc_core.c static int mv_ep_enable(struct usb_ep *_ep, · line 492
Quoted 10 lines
drivers/usb/gadget/udc/mv_udc_core.c +1
-0@@ -489,6 +489,7 @@ static int mv_ep_enable(struct usb_ep *_ep,break ;case USB_ENDPOINT_XFER_CONTROL : ios =1 ; +break ;are you SURE this is supposed to have this break statement? What if we want to initialize mult to 0 *also* for control endpoints? How did you test this? Do you have access to Marvel's documentation for this controller?
Quoted 6 lines
Certainly I wasn't sure, but I also think this is kind of obscure code. If that is the case that we also want to initialize mult to 0, wouldn't it be clearer (for maintenance purposes) to add mult = 0 and the break statement after ios = 1?
What do you think if I modify that piece of code as follows:
I think you need to test it, or get someone to test it for you :-)
Signature · 1 line
balbi
Greg KH
maintainerQuoted 30 lines · Felipe Balbi
Hi,
Quoted 26 lines · Gustavo A. R. Silva
Quoted 25 lines
Quoted 14 lines · Gustavo A. R. Silva
Add missing break in switch.
Addresses-Coverity-ID: 201385
Signed-off-by Gustavo A. R. Silva <[email protected]>--- drivers/usb/gadget/udc/mv_udc_core.c | 1 + 1 file changed, 1 insertion(+)drivers/usb/gadget/udc/mv_udc_core.c +0
-0drivers/usb/gadget/udc/mv_udc_core.c static int mv_ep_enable(struct usb_ep *_ep, · line 492
Quoted 4 lines
drivers/usb/gadget/udc/mv_udc_core.c +1
-0@@ -489,6 +489,7 @@ static int mv_ep_enable(struct usb_ep *_ep,break ;case USB_ENDPOINT_XFER_CONTROL : ios =1 ; +break ;are you SURE this is supposed to have this break statement? What if we want to initialize mult to 0 *also* for control endpoints? How did you test this? Do you have access to Marvel's documentation for this controller?
Quoted 8 lines
Quoted 6 lines
Certainly I wasn't sure, but I also think this is kind of obscure code. If that is the case that we also want to initialize mult to 0, wouldn't it be clearer (for maintenance purposes) to add mult = 0 and the break statement after ios = 1?
What do you think if I modify that piece of code as follows:
I think you need to test it, or get someone to test it for you :-)
For crap code like this where it's "obvious" that something is wrong? That's really hard.
How about a nice comment instead:
/* Code path falls through, is it correct or not, who knows??? */
which will make the static code checkers stop complaining about it, and if someone actually has the hardware, then they can test it.
thanks,
greg k-h
Hi,
Quoted 36 lines · Greg KH
Quoted 35 lines · Felipe Balbi
Hi,
Quoted 31 lines · Gustavo A. R. Silva
Quoted 9 lines
Quoted 8 lines · Gustavo A. R. Silva
Add missing break in switch.
Addresses-Coverity-ID: 201385
Signed-off-by Gustavo A. R. Silva <[email protected]>--- drivers/usb/gadget/udc/mv_udc_core.c | 1 + 1 file changed, 1 insertion(+)Quoted 16 lines
drivers/usb/gadget/udc/mv_udc_core.c static int mv_ep_enable(struct usb_ep *_ep, · line 492
Quoted 10 lines
drivers/usb/gadget/udc/mv_udc_core.c +1
-0@@ -489,6 +489,7 @@ static int mv_ep_enable(struct usb_ep *_ep,break ;case USB_ENDPOINT_XFER_CONTROL : ios =1 ; +break ;are you SURE this is supposed to have this break statement? What if we want to initialize mult to 0 *also* for control endpoints? How did you test this? Do you have access to Marvel's documentation for this controller?
Certainly I wasn't sure, but I also think this is kind of obscure code. If that is the case that we also want to initialize mult to 0, wouldn't it be clearer (for maintenance purposes) to add mult = 0 and the break statement after ios = 1?
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
What do you think if I modify that piece of code as follows:
I think you need to test it, or get someone to test it for you :-)
For crap code like this where it's "obvious" that something is wrong? That's really hard.
heh :-)
Quoted 4 lines
How about a nice comment instead:
/* Code path falls through, is it correct or not, who knows??? */which will make the static code checkers stop complaining about it, and if someone actually has the hardware, then they can test it.
works for me
Signature · 1 line
balbi
Quoted 11 lines · Felipe Balbi
Hi,
Quoted 8 lines · Gustavo A. R. Silva
Add missing break in switch.
Addresses-Coverity-ID: 201385
Signed-off-by Gustavo A. R. Silva <[email protected]>--- drivers/usb/gadget/udc/mv_udc_core.c | 1 + 1 file changed, 1 insertion(+)
Quoted 14 lines
drivers/usb/gadget/udc/mv_udc_core.c static int mv_ep_enable(struct usb_ep *_ep, · line 492
Quoted 9 lines
drivers/usb/gadget/udc/mv_udc_core.c +1
-0@@ -489,6 +489,7 @@ static int mv_ep_enable(struct usb_ep *_ep,break ;case USB_ENDPOINT_XFER_CONTROL : ios =1 ; +break ;are you SURE this is supposed to have this break statement? What if we want to initialize mult to 0 *also* for control endpoints? How did you test this? Do you have access to Marvel's documentation for this controller?
Actually it doesn’t matter. mult is initialised to zero when it’s declared and then not touched before the switch.
To improve readability, maybe something like:
---- >8 ------------------------------------------------------------
drivers/usb/gadget/udc/mv_udc_core.c +6 -7
@@ -445,7 +445,8 @@ static int mv_ep_enable(struct usb_ep *_ep,struct mv_dqh *dqh;u16 max =0 ;u32 bit_pos, epctrlx, direction; -unsigned char zlt =0 , ios =0 , mult =0 ; +const unsigned char zlt =1 ; +unsigned char ios, mult;unsigned long flags; ep = container_of(_ep, struct mv_ep, ep);
@@ -465,8 +466,6 @@ static int mv_ep_enable(struct usb_ep *_ep,* disable HW zero length termination select * driver handles zero length packet through req->req.zero */ - zlt =1 ; - bit_pos =1 << ((direction ==EP_DIR_OUT ?0 :16 ) + ep->ep_num);/* Check if the Endpoint is Primed */
@@ -481,16 +480,16 @@ static int mv_ep_enable(struct usb_ep *_ep, (unsigned)bit_pos); goto en_done; } +/* Set the max packet length, interrupt on Setup and Mult fields */ + ios =0 ; + mult =0 ;switch (desc->bmAttributes &USB_ENDPOINT_XFERTYPE_MASK ) {case USB_ENDPOINT_XFER_BULK : - zlt =1 ; - mult =0 ; +case USB_ENDPOINT_XFER_INT :break ;case USB_ENDPOINT_XFER_CONTROL : ios =1 ; -case USB_ENDPOINT_XFER_INT : - mult =0 ;break ;case USB_ENDPOINT_XFER_ISOC :/* Calculate transactions needed for high bandwidth iso */
---- >8 ------------------------------------------------------------
Signature · 3 lines
Best regards ミハウ “𝓶𝓲𝓷𝓪86” ナザレヴイツ «If at first you don’t succeed, give up skydiving»
Greg KH
maintainerQuoted 68 lines · Michal Nazarewicz
Quoted 11 lines · Felipe Balbi
Hi,
Quoted 8 lines · Gustavo A. R. Silva
Add missing break in switch.
Addresses-Coverity-ID: 201385
Signed-off-by Gustavo A. R. Silva <[email protected]>--- drivers/usb/gadget/udc/mv_udc_core.c | 1 + 1 file changed, 1 insertion(+)Quoted 14 lines
drivers/usb/gadget/udc/mv_udc_core.c static int mv_ep_enable(struct usb_ep *_ep, · line 492
Quoted 9 lines
drivers/usb/gadget/udc/mv_udc_core.c +1
-0@@ -489,6 +489,7 @@ static int mv_ep_enable(struct usb_ep *_ep,break ;case USB_ENDPOINT_XFER_CONTROL : ios =1 ; +break ;are you SURE this is supposed to have this break statement? What if we want to initialize mult to 0 *also* for control endpoints? How did you test this? Do you have access to Marvel's documentation for this controller?
Actually it doesn’t matter. mult is initialised to zero when it’s declared and then not touched before the switch.
To improve readability, maybe something like:
---- >8 ------------------------------------------------------------
drivers/usb/gadget/udc/mv_udc_core.c +5
-5@@ -445,7 +445,8 @@ static int mv_ep_enable(struct usb_ep *_ep,struct mv_dqh *dqh;u16 max =0 ;u32 bit_pos, epctrlx, direction; -unsigned char zlt =0 , ios =0 , mult =0 ; +const unsigned char zlt =1 ; +unsigned char ios, mult;unsigned long flags; ep = container_of(_ep, struct mv_ep, ep);@@ -465,8 +466,6 @@ static int mv_ep_enable(struct usb_ep *_ep,* disable HW zero length termination select * driver handles zero length packet through req->req.zero */ - zlt =1 ; - bit_pos =1 << ((direction ==EP_DIR_OUT ?0 :16 ) + ep->ep_num);/* Check if the Endpoint is Primed */ @@ -481,16 +480,16 @@ static int mv_ep_enable(struct usb_ep *_ep, (unsigned)bit_pos); goto en_done; } +/* Set the max packet length, interrupt on Setup and Mult fields */ + ios =0 ; + mult =0 ;switch (desc->bmAttributes &USB_ENDPOINT_XFERTYPE_MASK ) {case USB_ENDPOINT_XFER_BULK : - zlt =1 ; - mult =0 ;
drivers/usb/gadget/udc/mv_udc_core.c static int mv_ep_enable(struct usb_ep *_ep,
Quoted 10 lines
drivers/usb/gadget/udc/mv_udc_core.c +1
-3+case USB_ENDPOINT_XFER_INT :break ;case USB_ENDPOINT_XFER_CONTROL : ios =1 ; -case USB_ENDPOINT_XFER_INT : - mult =0 ;break ;case USB_ENDPOINT_XFER_ISOC :/* Calculate transactions needed for high bandwidth iso */ ---- >8 ------------------------------------------------------------
Ah, looks even better. Want to resend this in a "proper" format that we can apply it in?
thanks,
greg k-h
PATCH 1/1 usb: gadget: mv_udc: clarify a switch with an implicit fall-through
Rearrange statements in mv_ep_enable function so that it’s obvious what the switch does and how zlt, ios and mult variables are initialised. Most notably, this gets rid of an implicit fall-through so people don’t have to wonder whether it was intenional or not.
Addresses-Coverity-ID: 201385
--- drivers/usb/gadget/udc/mv_udc_core.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
drivers/usb/gadget/udc/mv_udc_core.c +6 -7
@@ -445,7 +445,8 @@ static int mv_ep_enable(struct usb_ep *_ep,struct mv_dqh *dqh;u16 max =0 ;u32 bit_pos, epctrlx, direction; -unsigned char zlt =0 , ios =0 , mult =0 ; +const unsigned char zlt =1 ; +unsigned char ios, mult;unsigned long flags; ep = container_of(_ep, struct mv_ep, ep);
@@ -465,8 +466,6 @@ static int mv_ep_enable(struct usb_ep *_ep,* disable HW zero length termination select * driver handles zero length packet through req->req.zero */ - zlt =1 ; - bit_pos =1 << ((direction ==EP_DIR_OUT ?0 :16 ) + ep->ep_num);/* Check if the Endpoint is Primed */
@@ -481,16 +480,16 @@ static int mv_ep_enable(struct usb_ep *_ep, (unsigned)bit_pos); goto en_done; } +/* Set the max packet length, interrupt on Setup and Mult fields */ + ios =0 ; + mult =0 ;switch (desc->bmAttributes &USB_ENDPOINT_XFERTYPE_MASK ) {case USB_ENDPOINT_XFER_BULK : - zlt =1 ; - mult =0 ; +case USB_ENDPOINT_XFER_INT :break ;case USB_ENDPOINT_XFER_CONTROL : ios =1 ; -case USB_ENDPOINT_XFER_INT : - mult =0 ;break ;case USB_ENDPOINT_XFER_ISOC :/* Calculate transactions needed for high bandwidth iso */
Signature · 1 line
2.11.0.483.g087da7b7c-goog