Skip to contentSkip to conversation

NET: Fix /proc/net/arp for AX.25

PATCH Applied Ralf Baechle 2 participants 2 messages Feb 10, 2017 – Feb 14, 2017

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 NET: Fix /proc/net/arp for AX.25

When sending ARP requests over AX.25 links the hwaddress in the neighbour cache are not getting initialized. For such an incomplete arp entry ax2asc2 will generate an empty string resulting in /proc/net/arp output like the following:

$ cat /proc/net/arp
IP address       HW type     Flags       HW address            Mask     Device
192.168.122.1    0x1         0x2         52:54:00:00:5d:5f     *        ens3
172.20.1.99      0x3         0x0              *        bpq0

The missing field will confuse the procfs parsing of arp(8) resulting in incorrect output for the device such as the following:

$ arp
Address                  HWtype  HWaddress           Flags Mask            Iface
gateway                  ether   52:54:00:00:5d:5f   C                     ens3
172.20.1.99                      (incomplete)                              ens3

This changes the content of /proc/net/arp to:

$ cat /proc/net/arp
IP address       HW type     Flags       HW address            Mask     Device
172.20.1.99      0x3         0x0         *                     *        bpq0
192.168.122.1    0x1         0x2         52:54:00:00:5d:5f     *        ens3

To do so it change ax2asc to put the string "*" in buf for a NULL address argument. Finally the HW address field is left aligned in a 17 character field (the length of an ethernet HW address in the usual hex notation) for readability.

---
 net/ipv4/arp.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
net/ipv4/arp.c +6 -6
index 89a8cac4..51b27ae 100644
@@ -1263,7 +1263,7 @@ void __init arp_init(void)
 /*
  *	ax25 -> ASCII conversion
  */
-static char *ax2asc2(ax25_address *a, char *buf)
+static void ax2asc2(ax25_address *a, char *buf)
 {
 	char c, *s;
 	int n;
@@ -1285,10 +1285,10 @@ static char *ax2asc2(ax25_address *a, char *buf)
 	*s++ = n + '0';
 	*s++ = '\0';
 
-	if (*buf == '\0' || *buf == '-')
-		return "*";
-
-	return buf;
+	if (*buf == '\0' || *buf == '-') {
+		buf[0] = '*';
+		buf[1] = '\0';
+	}
 }
 #endif /* CONFIG_AX25 */
 
@@ -1322,7 +1322,7 @@ static void arp_format_neigh_entry(struct seq_file *seq,
 	}
 #endif
 	sprintf(tbuf, "%pI4", n->primary_key);
-	seq_printf(seq, "%-16s 0x%-10x0x%-10x%s     *        %s\n",
+	seq_printf(seq, "%-16s 0x%-10x0x%-10x%-17s     *        %s\n",
 		   tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name);
 	read_unlock(&n->lock);
 }
maintainer Applied
#1 lore raw

From: Ralf Baechle <[email protected]>
Date: Sat, 11 Feb 2017 00:38:57 +0100

Quoted 25 lines

When sending ARP requests over AX.25 links the hwaddress in the neighbour cache are not getting initialized. For such an incomplete arp entry ax2asc2 will generate an empty string resulting in /proc/net/arp output like the following:

$ cat /proc/net/arp
IP address       HW type     Flags       HW address            Mask     Device
192.168.122.1    0x1         0x2         52:54:00:00:5d:5f     *        ens3
172.20.1.99      0x3         0x0              *        bpq0

The missing field will confuse the procfs parsing of arp(8) resulting in incorrect output for the device such as the following:

$ arp
Address                  HWtype  HWaddress           Flags Mask            Iface
gateway                  ether   52:54:00:00:5d:5f   C                     ens3
172.20.1.99                      (incomplete)                              ens3

This changes the content of /proc/net/arp to:

$ cat /proc/net/arp
IP address       HW type     Flags       HW address            Mask     Device
172.20.1.99      0x3         0x0         *                     *        bpq0
192.168.122.1    0x1         0x2         52:54:00:00:5d:5f     *        ens3
Quoted 6 lines

To do so it change ax2asc to put the string "*" in buf for a NULL address argument. Finally the HW address field is left aligned in a 17 character field (the length of an ethernet HW address in the usual hex notation) for readability.

Applied, thanks Ralf.