Skip to contentSkip to conversation

nfc: Add support RC-S380P to port100

PATCH RESEND In review OGAWA Hirofumi 2 participants 6 messages Feb 4, 2017 – Feb 27, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/4 nfc: Add support RC-S380P to port100

---

 drivers/nfc/port100.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/nfc/port100.c renamed from drivers/nfc/port100.c~nfc-add-rcs380p +5 -3
diff -puN drivers/nfc/port100.c~nfc-add-rcs380p drivers/nfc/port100.c
@@ -21,8 +21,9 @@
 
 #define VERSION "0.1"
 
-#define SONY_VENDOR_ID    0x054c
-#define RCS380_PRODUCT_ID 0x06c1
+#define SONY_VENDOR_ID		0x054c
+#define RCS380S_PRODUCT_ID	0x06c1
+#define RCS380P_PRODUCT_ID	0x06c3
 
 #define PORT100_PROTOCOLS (NFC_PROTO_JEWEL_MASK    | \
 			   NFC_PROTO_MIFARE_MASK   | \
@@ -1477,7 +1478,8 @@ static struct nfc_digital_ops port100_di
 };
 
 static const struct usb_device_id port100_table[] = {
-	{ USB_DEVICE(SONY_VENDOR_ID, RCS380_PRODUCT_ID), },
+	{ USB_DEVICE(SONY_VENDOR_ID, RCS380S_PRODUCT_ID), },
+	{ USB_DEVICE(SONY_VENDOR_ID, RCS380P_PRODUCT_ID), },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, port100_table);

_

Signature · 1 line
OGAWA Hirofumi <[email protected]>
#1 lore raw

PATCH RESEND 2/4 nfc: Send same info for both of NFC_CMD_GET_DEVICE and NFC_EVENT_DEVICE_ADDED

Now, NFC_EVENT_DEVICE_ADDED doesn't send NFC_ATTR_RF_MODE. But NFC_CMD_GET_DEVICE send.

To get NFC_ATTR_RF_MODE, we have to call NFC_CMD_GET_DEVICE just for NFC_ATTR_RF_MODE when get NFC_EVENT_DEVICE_ADDED.

This fixes those inconsistent.

---

 net/nfc/netlink.c |   22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)
net/nfc/netlink.c renamed from net/nfc/netlink.c~nfc-send-same-info +13 -9
diff -puN net/nfc/netlink.c~nfc-send-same-info net/nfc/netlink.c
@@ -311,6 +311,17 @@ free_msg:
 	return -EMSGSIZE;
 }
 
+static int nfc_genl_setup_device_added(struct nfc_dev *dev, struct sk_buff *msg)
+{
+	if (nla_put_string(msg, NFC_ATTR_DEVICE_NAME, nfc_device_name(dev)) ||
+	    nla_put_u32(msg, NFC_ATTR_DEVICE_INDEX, dev->idx) ||
+	    nla_put_u32(msg, NFC_ATTR_PROTOCOLS, dev->supported_protocols) ||
+	    nla_put_u8(msg, NFC_ATTR_DEVICE_POWERED, dev->dev_up) ||
+	    nla_put_u8(msg, NFC_ATTR_RF_MODE, dev->rf_mode))
+		return -1;
+	return 0;
+}
+
 int nfc_genl_device_added(struct nfc_dev *dev)
 {
 	struct sk_buff *msg;
@@ -325,10 +336,7 @@ int nfc_genl_device_added(struct nfc_dev
 	if (!hdr)
 		goto free_msg;
 
-	if (nla_put_string(msg, NFC_ATTR_DEVICE_NAME, nfc_device_name(dev)) ||
-	    nla_put_u32(msg, NFC_ATTR_DEVICE_INDEX, dev->idx) ||
-	    nla_put_u32(msg, NFC_ATTR_PROTOCOLS, dev->supported_protocols) ||
-	    nla_put_u8(msg, NFC_ATTR_DEVICE_POWERED, dev->dev_up))
+	if (nfc_genl_setup_device_added(dev, msg))
 		goto nla_put_failure;
 
 	genlmsg_end(msg, hdr);
@@ -604,11 +612,7 @@ static int nfc_genl_send_device(struct s
 	if (cb)
 		genl_dump_check_consistent(cb, hdr, &nfc_genl_family);
 
-	if (nla_put_string(msg, NFC_ATTR_DEVICE_NAME, nfc_device_name(dev)) ||
-	    nla_put_u32(msg, NFC_ATTR_DEVICE_INDEX, dev->idx) ||
-	    nla_put_u32(msg, NFC_ATTR_PROTOCOLS, dev->supported_protocols) ||
-	    nla_put_u8(msg, NFC_ATTR_DEVICE_POWERED, dev->dev_up) ||
-	    nla_put_u8(msg, NFC_ATTR_RF_MODE, dev->rf_mode))
+	if (nfc_genl_setup_device_added(dev, msg))
 		goto nla_put_failure;
 
 	genlmsg_end(msg, hdr);

_

Signature · 1 line
OGAWA Hirofumi <[email protected]>
#2 lore raw

PATCH RESEND 3/4 nfc: Fix RC-S380* needs zero-length packet

If sent packet size is wMaxPacketSize boundary, this device doesn't answer. To fix this, we have to send zero-length packet in usb spec.

---

 drivers/nfc/port100.c |    1 +
 1 file changed, 1 insertion(+)
drivers/nfc/port100.c renamed from drivers/nfc/port100.c~nfc-need-zero-packet +1 -0
diff -puN drivers/nfc/port100.c~nfc-need-zero-packet drivers/nfc/port100.c
@@ -1540,6 +1540,7 @@ static int port100_probe(struct usb_inte
 	usb_fill_bulk_urb(dev->out_urb, dev->udev,
 			  usb_sndbulkpipe(dev->udev, out_endpoint),
 			  NULL, 0, port100_send_complete, dev);
+	dev->out_urb->transfer_flags = URB_ZERO_PACKET;
 
 	dev->skb_headroom = PORT100_FRAME_HEADER_LEN +
 			    PORT100_COMM_RF_HEAD_MAX_LEN;

_

Signature · 1 line
OGAWA Hirofumi <[email protected]>
#3 lore raw

PATCH RESEND 4/4 nfc: Fix hangup of RC-S380* in port100_send_ack()

If port100_send_ack() was called twice or more, it has race to hangup.

port100_send_ack() port100_send_ack()

    init_completion()
    [...]
    dev->cmd_cancel = true
                                /* this removes previous from completion */
                                init_completion()
				[...]
                                dev->cmd_cancel = true
                                wait_for_completion()
    /* never be waked up */
    wait_for_completion()

Like above race, this code is not assuming port100_send_ack() is called twice or more.

To fix, this checks dev->cmd_cancel to know if prior cancel is in-flight or not. And never be remove prior task from completion by using reinit_completion(), so this guarantees to be waked up properly soon or later.

---

 drivers/nfc/port100.c |   37 ++++++++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 13 deletions(-)
drivers/nfc/port100.c renamed from drivers/nfc/port100.c~nfc-port100-hang-fix +24 -13
diff -puN drivers/nfc/port100.c~nfc-port100-hang-fix drivers/nfc/port100.c
@@ -726,23 +726,33 @@ static int port100_submit_urb_for_ack(st
 
 static int port100_send_ack(struct port100 *dev)
 {
-	int rc;
+	int rc = 0;
 
 	mutex_lock(&dev->out_urb_lock);
 
-	init_completion(&dev->cmd_cancel_done);
-
-	usb_kill_urb(dev->out_urb);
+	/*
+	 * If prior cancel is in-flight (dev->cmd_cancel == true), we
+	 * can skip to send cancel. Then this will wait the prior
+	 * cancel, or merged into the next cancel rarely if next
+	 * cancel was started before waiting done. In any case, this
+	 * will be waked up soon or later.
+	 */
+	if (!dev->cmd_cancel) {
+		reinit_completion(&dev->cmd_cancel_done);
 
-	dev->out_urb->transfer_buffer = ack_frame;
-	dev->out_urb->transfer_buffer_length = sizeof(ack_frame);
-	rc = usb_submit_urb(dev->out_urb, GFP_KERNEL);
+		usb_kill_urb(dev->out_urb);
 
-	/* Set the cmd_cancel flag only if the URB has been successfully
-	 * submitted. It will be reset by the out URB completion callback
-	 * port100_send_complete().
-	 */
-	dev->cmd_cancel = !rc;
+		dev->out_urb->transfer_buffer = ack_frame;
+		dev->out_urb->transfer_buffer_length = sizeof(ack_frame);
+		rc = usb_submit_urb(dev->out_urb, GFP_KERNEL);
+
+		/*
+		 * Set the cmd_cancel flag only if the URB has been
+		 * successfully submitted. It will be reset by the out
+		 * URB completion callback port100_send_complete().
+		 */
+		dev->cmd_cancel = !rc;
+	}
 
 	mutex_unlock(&dev->out_urb_lock);
 
@@ -929,8 +939,8 @@ static void port100_send_complete(struct
 	struct port100 *dev = urb->context;
 
 	if (dev->cmd_cancel) {
+		complete_all(&dev->cmd_cancel_done);
 		dev->cmd_cancel = false;
-		complete(&dev->cmd_cancel_done);
 	}
 
 	switch (urb->status) {
@@ -1546,6 +1556,7 @@ static int port100_probe(struct usb_inte
 			    PORT100_COMM_RF_HEAD_MAX_LEN;
 	dev->skb_tailroom = PORT100_FRAME_TAIL_LEN;
 
+	init_completion(&dev->cmd_cancel_done);
 	INIT_WORK(&dev->cmd_complete_work, port100_wq_cmd_complete);
 
 	/* The first thing to do with the Port-100 is to set the command type

_

Signature · 1 line
OGAWA Hirofumi <[email protected]>
#4 lore raw
In reply to OGAWA Hirofumi

OGAWA Hirofumi <[email protected]> writes:

Ping?

Quoted 32 lines

---

 drivers/nfc/port100.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff -puN drivers/nfc/port100.c~nfc-add-rcs380p drivers/nfc/port100.c

drivers/nfc/port100.c renamed from drivers/nfc/port100.c~nfc-add-rcs380p +5 -3
@@ -21,8 +21,9 @@
 
 #define VERSION "0.1"
 
-#define SONY_VENDOR_ID    0x054c
-#define RCS380_PRODUCT_ID 0x06c1
+#define SONY_VENDOR_ID		0x054c
+#define RCS380S_PRODUCT_ID	0x06c1
+#define RCS380P_PRODUCT_ID	0x06c3
 
 #define PORT100_PROTOCOLS (NFC_PROTO_JEWEL_MASK    | \
 			   NFC_PROTO_MIFARE_MASK   | \
@@ -1477,7 +1478,8 @@ static struct nfc_digital_ops port100_di
 };
 
 static const struct usb_device_id port100_table[] = {
-	{ USB_DEVICE(SONY_VENDOR_ID, RCS380_PRODUCT_ID), },
+	{ USB_DEVICE(SONY_VENDOR_ID, RCS380S_PRODUCT_ID), },
+	{ USB_DEVICE(SONY_VENDOR_ID, RCS380P_PRODUCT_ID), },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, port100_table);

_

Signature · 1 line
OGAWA Hirofumi <[email protected]>