4.11-rc0, thinkpad x220: GPU hang
Subsystems (2)
Hi!
mplayer stopped working after a while. Dmesg says:
[ 3000.266533] cdc_ether 2-1.2:1.0 usb0: register 'cdc_ether' at usb-0000:00:1d.0-1.2, CDC Ethernet Device, 22:1b:e4:4e:56:f5 [ 3190.767227] [drm] GPU HANG: ecode 6:0:0xbb409fff, in chromium [4597], reason: Hang on render ring, action: reset [ 3190.767311] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 3190.767313] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 3190.767315] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 3190.767317] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 3190.767320] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 3190.767427] drm/i915: Resetting chip after gpu hang [ 3228.329384] cdc_ether 2-1.2:1.0 usb0: kevent 12 may have been dropped [ 3228.329604] cdc_ether 2-1.2:1.0 usb0: kevent 12 may have been dropped [ 3877.246261] perf: interrupt took too long (3142 > 3133), lowering kernel.perf_event_max_sample_rate to 63500 [ 4802.784478] drm/i915: Resetting chip after gpu hang [ 4810.784851] drm/i915: Resetting chip after gpu hang [ 4829.829795] drm/i915: Resetting chip after gpu hang [ 4837.826154] drm/i915: Resetting chip after gpu hang [ 5125.026814] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308257 end=308258) time 203 us, min 763, max 767, scanline start 761, end 771 [ 5125.192602] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe B (start=307385 end=307386) time 204 us, min 1073, max 1079, scanline start 1071, end 1086 [ 5125.309992] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308274 end=308275) time 203 us, min 763, max 767, scanline start 758, end 768 [ 5125.460013] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308283 end=308284) time 204 us, min 763, max 767, scanline start 761, end 771 [ 5125.493340] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308285 end=308286) time 202 us, min 763, max 767, scanline start 761, end 771 [ 5125.526684] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308287 end=308288) time 204 us, min 763, max 767, scanline start 762, end 772 [ 5125.593245] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308291 end=308292) time 203 us, min 763, max 767, scanline start 758, end 768 [ 5125.676636] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308296 end=308297) time 202 us, min 763, max 767, scanline start 762, end 772 [ 5125.709960] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308298 end=308299) time 203 us, min 763, max 767, scanline start 762, end 772 [ 5126.093109] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308321 end=308322) time 204 us, min 763, max 767, scanline start 759, end 770 [ 5647.879171] drm/i915: Resetting chip after gpu hang [ 5655.879507] drm/i915: Resetting chip after gpu hang [ 5850.864464] drm/i915: Resetting chip after gpu hang [ 5858.864853] drm/i915: Resetting chip after gpu hang [ 5904.850879] drm/i915: Resetting chip after gpu hang [ 5912.851252] drm/i915: Resetting chip after gpu hang [ 5949.876973] drm/i915: Resetting chip after gpu hang [ 5957.877460] drm/i915: Resetting chip after gpu hang [ 6018.872153] drm/i915: Resetting chip after gpu hang [ 6030.872646] drm/i915: Resetting chip after gpu hang [ 7108.362610] perf: interrupt took too long (3935 > 3927), lowering kernel.perf_event_max_sample_rate to 50750 [ 9670.047072] drm/i915: Resetting chip after gpu hang [ 9678.047415] drm/i915: Resetting chip after gpu hang [10408.064806] drm/i915: Resetting chip after gpu hang [10416.097168] drm/i915: Resetting chip after gpu hang [10416.097181] [drm:i915_reset] *ERROR* GPU recovery failed
pavel@duo:/data/film$
Umm. Dmesg wants me to attach card0/error, but it looks like it contains quite a lot of data. If it contains actual framebuffer content, it may not be wise to post to mailing list....
Best regards,
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 76 lines · Pavel Machek
Hi!
mplayer stopped working after a while. Dmesg says:
[ 3000.266533] cdc_ether 2-1.2:1.0 usb0: register 'cdc_ether' at usb-0000:00:1d.0-1.2, CDC Ethernet Device, 22:1b:e4:4e:56:f5 [ 3190.767227] [drm] GPU HANG: ecode 6:0:0xbb409fff, in chromium [4597], reason: Hang on render ring, action: reset [ 3190.767311] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 3190.767313] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 3190.767315] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 3190.767317] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 3190.767320] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 3190.767427] drm/i915: Resetting chip after gpu hang [ 3228.329384] cdc_ether 2-1.2:1.0 usb0: kevent 12 may have been dropped [ 3228.329604] cdc_ether 2-1.2:1.0 usb0: kevent 12 may have been dropped [ 3877.246261] perf: interrupt took too long (3142 > 3133), lowering kernel.perf_event_max_sample_rate to 63500 [ 4802.784478] drm/i915: Resetting chip after gpu hang [ 4810.784851] drm/i915: Resetting chip after gpu hang [ 4829.829795] drm/i915: Resetting chip after gpu hang [ 4837.826154] drm/i915: Resetting chip after gpu hang [ 5125.026814] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308257 end=308258) time 203 us, min 763, max 767, scanline start 761, end 771 [ 5125.192602] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe B (start=307385 end=307386) time 204 us, min 1073, max 1079, scanline start 1071, end 1086 [ 5125.309992] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308274 end=308275) time 203 us, min 763, max 767, scanline start 758, end 768 [ 5125.460013] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308283 end=308284) time 204 us, min 763, max 767, scanline start 761, end 771 [ 5125.493340] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308285 end=308286) time 202 us, min 763, max 767, scanline start 761, end 771 [ 5125.526684] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308287 end=308288) time 204 us, min 763, max 767, scanline start 762, end 772 [ 5125.593245] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308291 end=308292) time 203 us, min 763, max 767, scanline start 758, end 768 [ 5125.676636] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308296 end=308297) time 202 us, min 763, max 767, scanline start 762, end 772 [ 5125.709960] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308298 end=308299) time 203 us, min 763, max 767, scanline start 762, end 772 [ 5126.093109] [drm:intel_pipe_update_end] *ERROR* Atomic update failure on pipe A (start=308321 end=308322) time 204 us, min 763, max 767, scanline start 759, end 770 [ 5647.879171] drm/i915: Resetting chip after gpu hang [ 5655.879507] drm/i915: Resetting chip after gpu hang [ 5850.864464] drm/i915: Resetting chip after gpu hang [ 5858.864853] drm/i915: Resetting chip after gpu hang [ 5904.850879] drm/i915: Resetting chip after gpu hang [ 5912.851252] drm/i915: Resetting chip after gpu hang [ 5949.876973] drm/i915: Resetting chip after gpu hang [ 5957.877460] drm/i915: Resetting chip after gpu hang [ 6018.872153] drm/i915: Resetting chip after gpu hang [ 6030.872646] drm/i915: Resetting chip after gpu hang [ 7108.362610] perf: interrupt took too long (3935 > 3927), lowering kernel.perf_event_max_sample_rate to 50750 [ 9670.047072] drm/i915: Resetting chip after gpu hang [ 9678.047415] drm/i915: Resetting chip after gpu hang [10408.064806] drm/i915: Resetting chip after gpu hang [10416.097168] drm/i915: Resetting chip after gpu hang [10416.097181] [drm:i915_reset] *ERROR* GPU recovery failed
Quoted 5 lines
pavel@duo:/data/film$
Umm. Dmesg wants me to attach card0/error, but it looks like it contains quite a lot of data. If it contains actual framebuffer content, it may not be wise to post to mailing list....
It contains command and register states. No pixel data unless userspace got particularly creative with its memory corruption.
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi!
Quoted 3 lines
Quoted 3 lines
mplayer stopped working after a while. Dmesg says:
[ 3000.266533] cdc_ether 2-1.2:1.0 usb0: register 'cdc_ether' at
Now I'm pretty sure it is a regression in v4.11-rc0. Any ideas what to try? Bisect will be slow and nasty :-(.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 8 lines · Pavel Machek
Hi!
Quoted 3 lines
Quoted 3 lines
mplayer stopped working after a while. Dmesg says:
[ 3000.266533] cdc_ether 2-1.2:1.0 usb0: register 'cdc_ether' atNow I'm pretty sure it is a regression in v4.11-rc0. Any ideas what to try? Bisect will be slow and nasty :-(.
I came the conclusion that #99671 is the ring HEAD overtaking the TAIL, and under the presumption that your bug matches (as the symptoms do):
drivers/gpu/drm/i915/intel_ringbuffer.c +2 -2
@@ -782,10 +782,10 @@ static void i9xx_submit_request(struct drm_i915_gem_request *request) {struct drm_i915_private *dev_priv = request->i915; -i915_gem_request_submit (request); -GEM_BUG_ON (!IS_ALIGNED (request->tail,8 ));I915_WRITE_TAIL (request->engine, request->tail); + +i915_gem_request_submit (request); }static void i9xx_emit_breadcrumb (struct drm_i915_gem_request *req,u32 *cs)
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 18 lines · Chris Wilson
Quoted 8 lines · Pavel Machek
Hi!
Quoted 3 lines
Quoted 3 lines
mplayer stopped working after a while. Dmesg says:
[ 3000.266533] cdc_ether 2-1.2:1.0 usb0: register 'cdc_ether' atNow I'm pretty sure it is a regression in v4.11-rc0. Any ideas what to try? Bisect will be slow and nasty :-(.
I came the conclusion that #99671 is the ring HEAD overtaking the TAIL, and under the presumption that your bug matches (as the symptoms do):
drivers/gpu/drm/i915/intel_ringbuffer.c +0
-0
drivers/gpu/drm/i915/intel_ringbuffer.c static void i9xx_submit_request(struct drm_i915_gem_request *request) · line 788
Quoted 9 lines
drivers/gpu/drm/i915/intel_ringbuffer.c +2
-2@@ -782,10 +782,10 @@ static void i9xx_submit_request(struct drm_i915_gem_request *request) {struct drm_i915_private *dev_priv = request->i915; -i915_gem_request_submit (request); -GEM_BUG_ON (!IS_ALIGNED (request->tail,8 ));I915_WRITE_TAIL (request->engine, request->tail); + +i915_gem_request_submit (request);
Hmm. request->tail is not set until i915_gem_request_submit() Uh oh. -Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 20 lines · Chris Wilson
Quoted 8 lines · Pavel Machek
Hi!
Quoted 3 lines
Quoted 3 lines
mplayer stopped working after a while. Dmesg says:
[ 3000.266533] cdc_ether 2-1.2:1.0 usb0: register 'cdc_ether' atNow I'm pretty sure it is a regression in v4.11-rc0. Any ideas what to try? Bisect will be slow and nasty :-(.
I came the conclusion that #99671 is the ring HEAD overtaking the TAIL, and under the presumption that your bug matches (as the symptoms do):
drivers/gpu/drm/i915/intel_ringbuffer.c +0
-0@@ -782,10 +782,10 @@ static void i9xx_submit_request(struct drm_i915_gem_request *request) {struct drm_i915_private *dev_priv = request->i915;
drivers/gpu/drm/i915/intel_ringbuffer.c static void i9xx_submit_request(struct drm_i915_gem_request *request) · line 791
Quoted 10 lines
drivers/gpu/drm/i915/intel_ringbuffer.c +2
-2-i915_gem_request_submit (request); -GEM_BUG_ON (!IS_ALIGNED (request->tail,8 ));I915_WRITE_TAIL (request->engine, request->tail); + +i915_gem_request_submit (request); }static void i9xx_emit_breadcrumb (struct drm_i915_gem_request *req,u32 *cs)
I applied it as:
drivers/gpu/drm/i915/intel_ringbuffer.c +2 -2
@@ -1338,9 +1338,9 @@ static void i9xx_submit_request(struct drm_i915_gem_request *request) {struct drm_i915_private *dev_priv = request->i915; -i915_gem_request_submit (request); -I915_WRITE_TAIL (request->engine, request->tail); + +i915_gem_request_submit (request); } static void i9xx_emit_breadcrumb(struct drm_i915_gem_request *req,
Hmm. But your next mail suggest that it may not be smart to try to boot it? :-).
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 51 lines · Pavel Machek
Quoted 20 lines · Chris Wilson
Quoted 8 lines · Pavel Machek
Hi!
Quoted 3 lines
Quoted 3 lines
mplayer stopped working after a while. Dmesg says:
[ 3000.266533] cdc_ether 2-1.2:1.0 usb0: register 'cdc_ether' atNow I'm pretty sure it is a regression in v4.11-rc0. Any ideas what to try? Bisect will be slow and nasty :-(.
I came the conclusion that #99671 is the ring HEAD overtaking the TAIL, and under the presumption that your bug matches (as the symptoms do):
drivers/gpu/drm/i915/intel_ringbuffer.c +0
-0@@ -782,10 +782,10 @@ static void i9xx_submit_request(struct drm_i915_gem_request *request) {struct drm_i915_private *dev_priv = request->i915;drivers/gpu/drm/i915/intel_ringbuffer.c static void i9xx_submit_request(struct drm_i915_gem_request *request) · line 791
Quoted 10 lines
drivers/gpu/drm/i915/intel_ringbuffer.c +2
-2-i915_gem_request_submit (request); -GEM_BUG_ON (!IS_ALIGNED (request->tail,8 ));I915_WRITE_TAIL (request->engine, request->tail); + +i915_gem_request_submit (request); }static void i9xx_emit_breadcrumb (struct drm_i915_gem_request *req,u32 *cs)I applied it as:
drivers/gpu/drm/i915/intel_ringbuffer.c +2
-2@@ -1338,9 +1338,9 @@ static void i9xx_submit_request(struct drm_i915_gem_request *request) {struct drm_i915_private *dev_priv = request->i915; -i915_gem_request_submit (request); -I915_WRITE_TAIL (request->engine, request->tail); + +i915_gem_request_submit (request); } static void i9xx_emit_breadcrumb(struct drm_i915_gem_request *req,
Quoted 2 lines
Hmm. But your next mail suggest that it may not be smart to try to boot it? :-).
Don't bother, it'll promptly hang.
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi!
Quoted 45 lines
Quoted 45 lines
Quoted 17 lines
Quoted 6 lines
Quoted 3 lines
Quoted 3 lines
mplayer stopped working after a while. Dmesg says:
[ 3000.266533] cdc_ether 2-1.2:1.0 usb0: register 'cdc_ether' atNow I'm pretty sure it is a regression in v4.11-rc0. Any ideas what to try? Bisect will be slow and nasty :-(.
I came the conclusion that #99671 is the ring HEAD overtaking the TAIL, and under the presumption that your bug matches (as the symptoms do):
drivers/gpu/drm/i915/intel_ringbuffer.c +0
-0@@ -782,10 +782,10 @@ static void i9xx_submit_request(struct drm_i915_gem_request *request) {struct drm_i915_private *dev_priv = request->i915;drivers/gpu/drm/i915/intel_ringbuffer.c static void i9xx_submit_request(struct drm_i915_gem_request *request) · line 791
Quoted 10 lines
drivers/gpu/drm/i915/intel_ringbuffer.c +2
-2-i915_gem_request_submit (request); -GEM_BUG_ON (!IS_ALIGNED (request->tail,8 ));I915_WRITE_TAIL (request->engine, request->tail); + +i915_gem_request_submit (request); }static void i9xx_emit_breadcrumb (struct drm_i915_gem_request *req,u32 *cs)I applied it as:
drivers/gpu/drm/i915/intel_ringbuffer.c +2
-2@@ -1338,9 +1338,9 @@ static void i9xx_submit_request(struct drm_i915_gem_request *request) {struct drm_i915_private *dev_priv = request->i915; -i915_gem_request_submit (request); -I915_WRITE_TAIL (request->engine, request->tail); + +i915_gem_request_submit (request); }
Quoted 6 lines
Quoted 4 lines
drivers/gpu/drm/i915/intel_ringbuffer.c +0
-0static void i9xx_emit_breadcrumb(struct drm_i915_gem_request *req,Hmm. But your next mail suggest that it may not be smart to try to boot it? :-).
Don't bother, it'll promptly hang.
Any news here?
Is there something I can revert to get back to working system?
Thanks,
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 15 lines · Chris Wilson
Quoted 14 lines · Pavel Machek
Quoted 13 lines · Chris Wilson
Quoted 8 lines · Pavel Machek
Hi!
Quoted 3 lines
Quoted 3 lines
mplayer stopped working after a while. Dmesg says:
[ 3000.266533] cdc_ether 2-1.2:1.0 usb0: register 'cdc_ether' atNow I'm pretty sure it is a regression in v4.11-rc0. Any ideas what to try? Bisect will be slow and nasty :-(.
I came the conclusion that #99671 is the ring HEAD overtaking the TAIL, and under the presumption that your bug matches (as the symptoms do):
...
Quoted 6 lines
Quoted 4 lines
static void i9xx_emit_breadcrumb(struct
drm_i915_gem_request*req,Hmm. But your next mail suggest that it may not be smart to try to boot it? :-).
Don't bother, it'll promptly hang.
Any news here? Is there chance this is fixed in -rc4?
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 50 lines · Chris Wilson
Quoted 49 lines · Pavel Machek
Quoted 20 lines · Chris Wilson
Quoted 8 lines · Pavel Machek
Hi!
Quoted 3 lines
Quoted 3 lines
mplayer stopped working after a while. Dmesg says:
[ 3000.266533] cdc_ether 2-1.2:1.0 usb0: register 'cdc_ether' atNow I'm pretty sure it is a regression in v4.11-rc0. Any ideas what to try? Bisect will be slow and nasty :-(.
I came the conclusion that #99671 is the ring HEAD overtaking the TAIL, and under the presumption that your bug matches (as the symptoms do):
drivers/gpu/drm/i915/intel_ringbuffer.c +0
-0@@ -782,10 +782,10 @@ static void i9xx_submit_request(struct drm_i915_gem_request *request) {struct drm_i915_private *dev_priv = request->i915;drivers/gpu/drm/i915/intel_ringbuffer.c static void i9xx_submit_request(struct drm_i915_gem_request *request) · line 791
Quoted 10 lines
drivers/gpu/drm/i915/intel_ringbuffer.c +2
-2-i915_gem_request_submit (request); -GEM_BUG_ON (!IS_ALIGNED (request->tail,8 ));I915_WRITE_TAIL (request->engine, request->tail); + +i915_gem_request_submit (request); }static void i9xx_emit_breadcrumb (struct drm_i915_gem_request *req,u32 *cs)I applied it as:
drivers/gpu/drm/i915/intel_ringbuffer.c +2
-2@@ -1338,9 +1338,9 @@ static void i9xx_submit_request(struct drm_i915_gem_request *request) {struct drm_i915_private *dev_priv = request->i915; -i915_gem_request_submit (request); -I915_WRITE_TAIL (request->engine, request->tail); + +i915_gem_request_submit (request); }
Quoted 6 lines
Quoted 4 lines
drivers/gpu/drm/i915/intel_ringbuffer.c +0
-0static void i9xx_emit_breadcrumb(struct drm_i915_gem_request *req,Hmm. But your next mail suggest that it may not be smart to try to boot it? :-).
Don't bother, it'll promptly hang.
Any news here? 4.11-rc5 is actually usable on the hardware (unlike -rc1), not sure what changed.
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 5 lines · Pavel Machek
Quoted 3 lines
Quoted 3 lines
mplayer stopped working after a while. Dmesg says:
[ 3000.266533] cdc_ether 2-1.2:1.0 usb0: register 'cdc_ether' atNow I'm pretty sure it is a regression in v4.11-rc0. Any ideas what to try? Bisect will be slow and nasty :-(.
@Pavel, @Chris: What's the status of this?
I added this report to the list of regressions for Linux 4.11. I'll try to watch this thread for further updates on this issue to document progress in my weekly reports. Please let me know in case the discussion moves to a different place (bugzilla or another mail thread for example). tia!
Ciao, Thorsten
Quoted 7 lines · Thorsten Leemhuis
Quoted 5 lines · Pavel Machek
Quoted 3 lines
Quoted 3 lines
mplayer stopped working after a while. Dmesg says:
[ 3000.266533] cdc_ether 2-1.2:1.0 usb0: register 'cdc_ether' atNow I'm pretty sure it is a regression in v4.11-rc0. Any ideas what to try? Bisect will be slow and nasty :-(.
Quoted 7 lines
@Pavel, @Chris: What's the status of this?
I added this report to the list of regressions for Linux 4.11. I'll try to watch this thread for further updates on this issue to document progress in my weekly reports. Please let me know in case the discussion moves to a different place (bugzilla or another mail thread for example). tia!
We know where the bug is, but there's no fix for it. There was one patch, but it was quickly withdrawn.
Pavel
Signature · 6 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx