configs: add defconfig for Nationalchip gx6605s dev board.
PATCH 1/4 configs: add defconfig for Nationalchip gx6605s dev board.
gx6605s is a nice SOC for dvbs2 DVB product, and C-SKY inside.
Signed-off-by Guo Ren <[email protected]>
--- board/csky/gx6605s/gdbinit | 25 ++ board/csky/gx6605s/gx6605s.dts | 56 ++++ board/csky/gx6605s/gx6622.dts | 56 ++++ board/csky/gx6605s/gx66xx_defconfig | 525 ++++++++++++++++++++++++++++++++++++ board/csky/post-image.sh | 4 + board/csky/readme.txt | 106 ++++++++ configs/csky_gx6605s_defconfig | 19 ++ 7 files changed, 791 insertions(+) create mode 100644 board/csky/gx6605s/gdbinit create mode 100644 board/csky/gx6605s/gx6605s.dts create mode 100644 board/csky/gx6605s/gx6622.dts create mode 100644 board/csky/gx6605s/gx66xx_defconfig create mode 100755 board/csky/post-image.sh create mode 100644 board/csky/readme.txt create mode 100644 configs/csky_gx6605s_defconfig
board/csky/gx6605s/gdbinit new file +25 -0
@@ -0,0 +1,25 @@ +tar jtag jtag://127.0.0.1:1025 +reset + +# setup CCR (Cache Config Reg) +# 0-1:MP,2:IE,3:DE,4:WB,5:RS,6:Z,7:BE +set $cr18 = 0x7d + +# vendor custom setup, double cache line & preload +set $cr30 = 0xc + +# pin mux for serial8250 +set *(unsigned int *) 0xa030a14c |= (1 << 22) | (1 << 23) + +# pass devicetree blob +# r2 is magic +# r3 is address +set $r2 = 0x20150401 +set $r3 = 0x92000000 +restore gx6605s.dtb binary 0x92000000 + +# flush cache +set $cr17 = 0x33 + +load +
board/csky/gx6605s/gx6605s.dts new file +56 -0
56 lines not on this page · raw message
board/csky/gx6605s/gx6622.dts new file +56 -0
56 lines not on this page · raw message
board/csky/gx6605s/gx66xx_defconfig new file +525 -0
525 lines not on this page · raw message
board/csky/post-image.sh new file +4 -0
@@ -0,0 +1,4 @@ +#!/bin/sh +# copy board/csky/xxx/gdbinit to images/.gdbinit for +BOARD_DIR="$(dirname $0)" +cp -af $BOARD_DIR/${2}/gdbinit $BINARIES_DIR/.gdbinit
board/csky/readme.txt new file +106 -0
106 lines not on this page · raw message
configs/csky_gx6605s_defconfig new file +19 -0
@@ -0,0 +1,19 @@ +BR2_csky=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y +BR2_TOOLCHAIN_EXTERNAL_URL="https://github.com/c-sky/tools/raw/master/csky-linux-tools-x86_64-glibc-linux-4.9.2-20170227.tar.gz" +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="csky-linux" +BR2_TOOLCHAIN_EXTERNAL_GCC_4_5=y +BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_9=y +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y +BR2_TOOLCHAIN_EXTERNAL_CXX=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/csky/post-image.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="gx6605s" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/c-sky/linux-4.9.y/archive/HEAD.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="gx66xx" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="gx6605s"
Signature · 1 line
1.9.1
PATCH 1/4 configs: add defconfig for Nationalchip gx6605s dev board.
Sorry, all
abandon this patch, sorry.
I forget delete dts and defconfig for linux-kernel
Quoted 853 lines · Guo Ren
gx6605s is a nice SOC for dvbs2 DVB product, and C-SKY inside.
Signed-off-by Guo Ren <[email protected]>--- board/csky/gx6605s/gdbinit | 25 ++ board/csky/gx6605s/gx6605s.dts | 56 ++++ board/csky/gx6605s/gx6622.dts | 56 ++++ board/csky/gx6605s/gx66xx_defconfig | 525 ++++++++++++++++++++++++++++++++++++ board/csky/post-image.sh | 4 + board/csky/readme.txt | 106 ++++++++ configs/csky_gx6605s_defconfig | 19 ++ 7 files changed, 791 insertions(+)create mode 100644 board/csky/gx6605s/gdbinit create mode 100644
board/csky/gx6605s/gx6605s.dtscreate mode 100644board/csky/gx6605s/gx6622.dtscreate mode 100644 board/csky/gx6605s/gx66xx_defconfig create mode 100755board/csky/post-image.shcreate mode 100644board/csky/readme.txtcreate mode 100644 configs/csky_gx6605s_defconfigboard/csky/gx6605s/gdbinit new file +25
-0@@ -0,0 +1,25 @@ +tar jtag jtag://127.0.0.1:1025 +reset + +# setup CCR (Cache Config Reg) +# 0-1:MP,2:IE,3:DE,4:WB,5:RS,6:Z,7:BE +set $cr18 = 0x7d + +# vendor custom setup, double cache line & preload +set $cr30 = 0xc + +# pin mux for serial8250 +set *(unsigned int *) 0xa030a14c |= (1 << 22) | (1 << 23) + +# pass devicetree blob +# r2 is magic +# r3 is address +set $r2 = 0x20150401 +set $r3 = 0x92000000 +restore gx6605s.dtb binary 0x92000000 + +# flush cache +set $cr17 = 0x33 + +load +board/csky/gx6605s/gx6605s.dts new file +56
-0@@ -0,0 +1,56 @@ +/dts-v1/; +/ { + model = "Nationalchip csky gx6605s"; + compatible = "csky,nationalchip-gx6605s"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + device_type = "memory"; + reg = <0x10000000 0x04000000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + intc: interrupt-controller { + compatible = "nationalchip,intc-v1,ave"; + reg = <0x00500000 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + timer0 { + compatible = "nationalchip,timer-v1"; + reg = <0x0020a000 0x400>; + clock-frequency = <1000000>; + interrupts = <10>; + interrupt-parent = <&intc>; + }; + + ehci: ehci-hcd { + compatible = "generic-ehci"; + reg = <0x00900000 0x400>; + interrupt-parent = <&intc>; + interrupts = <59>; + }; + + uart0: serial at 403000 { + compatible = "ns16550a"; + reg = <0x00403000 0x400>; + interrupt-parent = <&intc>; + interrupts = <15>; + clock-frequency = <29491200>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <1>; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200 init=/sbin/init root=/dev/nfs rw nfsroot=192.168.101.230:/opt/nfs/test,v3,tcp,nolock ip=192.168.101.25"; + }; +};board/csky/gx6605s/gx6622.dts new file +56
-0@@ -0,0 +1,56 @@ +/dts-v1/; +/ { + model = "Nationalchip csky gx6605s"; + compatible = "csky,nationalchip-gx6605s"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + device_type = "memory"; + reg = <0x10000000 0x08000000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + intc: interrupt-controller { + compatible = "nationalchip,intc-v1,ave"; + reg = <0x00500000 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + timer0 { + compatible = "nationalchip,timer-v1"; + reg = <0x0020a000 0x400>; + clock-frequency = <1000000>; + interrupts = <10>; + interrupt-parent = <&intc>; + }; + + ehci: ehci-hcd { + compatible = "generic-ehci"; + reg = <0x00900000 0x400>; + interrupt-parent = <&intc>; + interrupts = <59>; + }; + + uart0: serial at 403000 { + compatible = "ns16550a"; + reg = <0x00403000 0x400>; + interrupt-parent = <&intc>; + interrupts = <15>; + clock-frequency = <29491200>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <1>; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200 init=/sbin/init root=/dev/nfs rw nfsroot=192.168.101.230:/opt/nfs/test,v3,tcp,nolock ip=192.168.101.23"; + }; +};board/csky/gx6605s/gx66xx_defconfig new file +525
-0@@ -0,0 +1,525 @@ +CONFIG_CROSS_COMPILE="csky-linux-" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_DEFAULT_HOSTNAME="github.com/c-sky" +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_FHANDLE is not set +CONFIG_USELIB=y +CONFIG_AUDIT=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_RELAY=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_AIO is not set +CONFIG_USERFAULTFD=y +CONFIG_EMBEDDED=y +# CONFIG_PERF_EVENTS is not set +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ACORN_PARTITION=y +CONFIG_ACORN_PARTITION_ICS=y +CONFIG_ACORN_PARTITION_RISCIX=y +CONFIG_AIX_PARTITION=y +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_LDM_PARTITION=y +CONFIG_SGI_PARTITION=y +CONFIG_ULTRIX_PARTITION=y +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_SYSV68_PARTITION=y +CONFIG_CMDLINE_PARTITION=y +CONFIG_DEFAULT_DEADLINE=y +CONFIG_NATIONALCHIP_TIMER=y +CONFIG_NATIONALCHIP_IRQ=y +CONFIG_CSKY_IRQ=y +# CONFIG_MMU_HARD_REFILL is not set +CONFIG_RAM_BASE=0x10000000 +# CONFIG_SUSPEND is not set +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_IPV6 is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_VIRTIO_BLK=y +CONFIG_AD525X_DPOT=m +CONFIG_AD525X_DPOT_I2C=m +CONFIG_DUMMY_IRQ=m +CONFIG_ICS932S401=m +CONFIG_ENCLOSURE_SERVICES=m +CONFIG_APDS9802ALS=m +CONFIG_ISL29003=m +CONFIG_ISL29020=m +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_BH1770=m +CONFIG_SENSORS_APDS990X=m +CONFIG_HMC6352=m +CONFIG_DS1682=m +CONFIG_USB_SWITCH_FSA9480=m +CONFIG_SRAM=y +CONFIG_C2PORT=m +CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m +CONFIG_EEPROM_93CX6=m +CONFIG_SENSORS_LIS3_I2C=m +CONFIG_ALTERA_STAPL=m +CONFIG_ECHO=m +CONFIG_SCSI=y +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SRP_ATTRS=m +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_USB_RTL8150=y +CONFIG_USB_RTL8152=y +CONFIG_USB_USBNET=y +CONFIG_INPUT_SPARSEKMAP=m +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=m +CONFIG_KEYBOARD_ADP5588=m +CONFIG_KEYBOARD_ADP5589=m +CONFIG_KEYBOARD_QT1070=m +CONFIG_KEYBOARD_QT2160=m +CONFIG_KEYBOARD_LKKBD=m +CONFIG_KEYBOARD_TCA6416=m +CONFIG_KEYBOARD_TCA8418=m +CONFIG_KEYBOARD_LM8323=m +CONFIG_KEYBOARD_LM8333=m +CONFIG_KEYBOARD_MAX7359=m +CONFIG_KEYBOARD_MCS=m +CONFIG_KEYBOARD_MPR121=m +CONFIG_KEYBOARD_NEWTON=m +CONFIG_KEYBOARD_OPENCORES=m +CONFIG_KEYBOARD_STOWAWAY=m +CONFIG_KEYBOARD_SUNKBD=m +CONFIG_KEYBOARD_XTKBD=m +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_PS2_SENTELIC=y +CONFIG_MOUSE_PS2_TOUCHKIT=y +CONFIG_MOUSE_SERIAL=m +CONFIG_MOUSE_CYAPA=m +CONFIG_MOUSE_VSXXXAA=m +CONFIG_MOUSE_SYNAPTICS_I2C=m +CONFIG_INPUT_JOYSTICK=y +CONFIG_JOYSTICK_ANALOG=m +CONFIG_JOYSTICK_A3D=m +CONFIG_JOYSTICK_ADI=m +CONFIG_JOYSTICK_COBRA=m +CONFIG_JOYSTICK_GF2K=m +CONFIG_JOYSTICK_GRIP=m +CONFIG_JOYSTICK_GRIP_MP=m +CONFIG_JOYSTICK_GUILLEMOT=m +CONFIG_JOYSTICK_INTERACT=m +CONFIG_JOYSTICK_SIDEWINDER=m +CONFIG_JOYSTICK_TMDC=m +CONFIG_JOYSTICK_IFORCE=m +CONFIG_JOYSTICK_IFORCE_232=y +CONFIG_JOYSTICK_WARRIOR=m +CONFIG_JOYSTICK_MAGELLAN=m +CONFIG_JOYSTICK_SPACEORB=m +CONFIG_JOYSTICK_SPACEBALL=m +CONFIG_JOYSTICK_STINGER=m +CONFIG_JOYSTICK_TWIDJOY=m +CONFIG_JOYSTICK_ZHENHUA=m +CONFIG_JOYSTICK_AS5011=m +CONFIG_JOYSTICK_JOYDUMP=m +CONFIG_INPUT_TABLET=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_AD7879=m +CONFIG_TOUCHSCREEN_AD7879_I2C=m +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_TOUCHSCREEN_BU21013=m +CONFIG_TOUCHSCREEN_CYTTSP_CORE=m +CONFIG_TOUCHSCREEN_CYTTSP_I2C=m +CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m +CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m +CONFIG_TOUCHSCREEN_DYNAPRO=m +CONFIG_TOUCHSCREEN_HAMPSHIRE=m +CONFIG_TOUCHSCREEN_EETI=m +CONFIG_TOUCHSCREEN_FUJITSU=m +CONFIG_TOUCHSCREEN_ILI210X=m +CONFIG_TOUCHSCREEN_GUNZE=m +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_WACOM_W8001=m +CONFIG_TOUCHSCREEN_WACOM_I2C=m +CONFIG_TOUCHSCREEN_MAX11801=m +CONFIG_TOUCHSCREEN_MCS5000=m +CONFIG_TOUCHSCREEN_MMS114=m +CONFIG_TOUCHSCREEN_MTOUCH=m +CONFIG_TOUCHSCREEN_INEXIO=m +CONFIG_TOUCHSCREEN_MK712=m +CONFIG_TOUCHSCREEN_PENMOUNT=m +CONFIG_TOUCHSCREEN_EDT_FT5X06=m +CONFIG_TOUCHSCREEN_TOUCHRIGHT=m +CONFIG_TOUCHSCREEN_TOUCHWIN=m +CONFIG_TOUCHSCREEN_PIXCIR=m +CONFIG_TOUCHSCREEN_TOUCHIT213=m +CONFIG_TOUCHSCREEN_TSC_SERIO=m +CONFIG_TOUCHSCREEN_TSC2007=m +CONFIG_TOUCHSCREEN_ST1232=m +CONFIG_TOUCHSCREEN_TPS6507X=m +CONFIG_INPUT_MISC=y +CONFIG_INPUT_AD714X=m +CONFIG_INPUT_BMA150=m +CONFIG_INPUT_MMA8450=m +CONFIG_INPUT_MPU3050=m +CONFIG_INPUT_KXTJ9=m +CONFIG_INPUT_UINPUT=y +CONFIG_INPUT_PCF8574=m +CONFIG_INPUT_ADXL34X=m +CONFIG_INPUT_CMA3000=m +CONFIG_INPUT_CMA3000_I2C=m +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_RAW=m +CONFIG_SERIO_ALTERA_PS2=m +CONFIG_SERIO_PS2MULT=m +CONFIG_SERIO_ARC_PS2=m +CONFIG_GAMEPORT_NS558=m +CONFIG_GAMEPORT_L4=m +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_TTY_PRINTK=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_IPMI_HANDLER=y +CONFIG_IPMI_DEVICE_INTERFACE=m +CONFIG_IPMI_SI=m +CONFIG_IPMI_WATCHDOG=m +CONFIG_IPMI_POWEROFF=m +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=m +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_HW_RANDOM_TPM=m +CONFIG_TCG_TIS_I2C_ATMEL=m +CONFIG_TCG_TIS_I2C_INFINEON=m +CONFIG_TCG_TIS_I2C_NUVOTON=m +CONFIG_TCG_ATMEL=m +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_MUX_PCA9541=m +CONFIG_I2C_DESIGNWARE_PLATFORM=m +CONFIG_I2C_OCORES=m +CONFIG_I2C_PCA_PLATFORM=m +CONFIG_I2C_SIMTEC=m +CONFIG_I2C_XILINX=m +CONFIG_I2C_PARPORT_LIGHT=m +CONFIG_I2C_TAOS_EVM=m +CONFIG_I2C_STUB=m +CONFIG_PPS=m +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_GPIO=m +CONFIG_POWER_RESET=y +# CONFIG_HWMON is not set +CONFIG_SSB=m +CONFIG_BCMA=m +CONFIG_BCMA_HOST_SOC=y +CONFIG_BCMA_DRIVER_GMAC_CMN=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=y +# CONFIG_USB_GSPCA is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_PLATFORM=m +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=m +CONFIG_BACKLIGHT_ADP8860=m +CONFIG_BACKLIGHT_ADP8870=m +CONFIG_BACKLIGHT_LM3639=m +CONFIG_BACKLIGHT_LV5207LP=m +CONFIG_BACKLIGHT_BD6107=m +# CONFIG_VGA_CONSOLE is not set +# CONFIG_HID_GENERIC is not set +CONFIG_HID_A4TECH=m +CONFIG_HID_ACRUX=m +CONFIG_HID_ACRUX_FF=y +CONFIG_HID_APPLE=m +CONFIG_HID_AUREAL=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y +CONFIG_HID_EMS_FF=m +CONFIG_HID_ELECOM=m +CONFIG_HID_EZKEY=m +CONFIG_HID_KEYTOUCH=m +CONFIG_HID_KYE=m +CONFIG_HID_WALTOP=m +CONFIG_HID_GYRATION=m +CONFIG_HID_ICADE=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=m +CONFIG_HID_LCPOWER=m +CONFIG_HID_LOGITECH=m +CONFIG_HID_LOGITECH_HIDPP=m +CONFIG_LOGITECH_FF=y +CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_LOGIG940_FF=y +CONFIG_HID_MAGICMOUSE=m +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_MULTITOUCH=m +CONFIG_HID_ORTEK=m +CONFIG_HID_PANTHERLORD=m +CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PETALYNX=m +CONFIG_HID_PICOLCD=m +CONFIG_HID_PICOLCD_BACKLIGHT=y +CONFIG_HID_PICOLCD_LCD=y +CONFIG_HID_PICOLCD_LEDS=y +CONFIG_HID_PRIMAX=m +CONFIG_HID_SAITEK=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SPEEDLINK=m +CONFIG_HID_STEELSERIES=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_RMI=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_SMARTJOYPLUS_FF=y +CONFIG_HID_TIVO=m +CONFIG_HID_TOPSEED=m +CONFIG_HID_THINGM=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_WACOM=m +CONFIG_HID_WIIMOTE=m +CONFIG_HID_XINMO=m +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y +CONFIG_HID_ZYDACRON=m +CONFIG_HID_SENSOR_HUB=m +CONFIG_I2C_HID=m +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_LM3530=m +CONFIG_LEDS_LM3642=m +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_LP3944=m +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_LP5523=m +CONFIG_LEDS_LP5562=m +CONFIG_LEDS_LP8501=m +CONFIG_LEDS_PCA955X=m +CONFIG_LEDS_PCA963X=m +CONFIG_LEDS_BD2802=m +CONFIG_LEDS_TCA6507=m +CONFIG_LEDS_LM355x=m +CONFIG_LEDS_BLINKM=m +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_ONESHOT=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m +CONFIG_LEDS_TRIGGER_TRANSIENT=m +CONFIG_LEDS_TRIGGER_CAMERA=m +CONFIG_VIRTIO_BALLOON=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_STE_MODEM_RPROC=m +CONFIG_PM_DEVFREQ=y +CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y +CONFIG_DEVFREQ_GOV_PERFORMANCE=y +CONFIG_DEVFREQ_GOV_POWERSAVE=y +CONFIG_DEVFREQ_GOV_USERSPACE=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +# CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +CONFIG_CACHEFILES=m +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_UTF8=y +CONFIG_NTFS_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_CHILDREN=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CONFIGFS_FS=y +CONFIG_CRAMFS=y +CONFIG_ROMFS_FS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=y +CONFIG_NLS_CODEPAGE_775=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +CONFIG_NLS_CODEPAGE_855=y +CONFIG_NLS_CODEPAGE_857=y +CONFIG_NLS_CODEPAGE_860=y +CONFIG_NLS_CODEPAGE_861=y +CONFIG_NLS_CODEPAGE_863=y +CONFIG_NLS_CODEPAGE_864=y +CONFIG_NLS_CODEPAGE_865=y +CONFIG_NLS_CODEPAGE_866=y +CONFIG_NLS_CODEPAGE_869=y +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_CODEPAGE_950=y +CONFIG_NLS_CODEPAGE_932=y +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m +CONFIG_NLS_UTF8=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_RBTREE_TEST=m +CONFIG_INTERVAL_TREE_TEST=m +CONFIG_PERCPU_TEST=m +CONFIG_TEST_STRING_HELPERS=m +CONFIG_TEST_KSTRTOX=m +CONFIG_PERSISTENT_KEYRINGS=y +CONFIG_TRUSTED_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_PATH=y +CONFIG_SECURITY_YAMA=y +CONFIG_INTEGRITY_SIGNATURE=y +CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y +CONFIG_IMA=y +CONFIG_IMA_APPRAISE=y +CONFIG_EVM=y +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_LZ4=m +CONFIG_CRYPTO_LZ4HC=m +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRC_CCITT=m +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m +CONFIG_CRC8=m +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_TEST=m +CONFIG_CORDIC=m +CONFIG_DDR=yboard/csky/post-image.sh new file +4
-0@@ -0,0 +1,4 @@ +#!/bin/sh +# copy board/csky/xxx/gdbinit to images/.gdbinit for +BOARD_DIR="$(dirname $0)" +cp -af $BOARD_DIR/${2}/gdbinit $BINARIES_DIR/.gdbinitboard/csky/readme.txt new file +106
-0@@ -0,0 +1,106 @@ +C-SKY Development Kit + +Intro +===== + +C-SKY is a CPU Architecture from www.c-sky.com and has it own instruction set. +Just like arm and mips in linux/arch, it named as 'csky'. + +For C-SKY linux kernel it's made up of three components: +1. linux/arch/csky contains the CPU related linux arch implement, eg: mmu, + task-switch, cache control, ... default git repo is here: + + http://github.com/c-sky/csky-linux + +2. linux/addons contains the SOC's drivers which haven't committed in official + linux source code, but we really need them to make the board run. + Here is the default addons git repo: + + http://github.com/c-sky/csky-addons + + Some C-SKY soc vendor has it own addons git repo. And you can specify + the git-repo in buildroot configuration. + +3. Official Linux kernel source from www.kernel.org :) + +Buildroot will download cross compiler tools and make them together building, +finally setup the rootfs with the packages which spicified in buildroot +configuration. + +How to build it +=============== + +Configure Buildroot +------------------- + +The csky_gx6605s_defconfig configuration is a sample configuration with +all that is required to bring the gx6605s Development Board: + + $ make csky_gx6605s_defconfig + +Build everything +---------------- + +Note: you will need to have access to the network, since Buildroot will +download the packages' sources. + + $ make # All will be done, just wait :) + +Result of the build +------------------- + +After building, you should obtain this tree: + + output/images/ + ??? vmlinux + ??? rootfs.tar + ??? <board name>.dtb + ??? .gdbinit + +How to run it +============= + +1. Download the Jtag-Server here: + + https://pan.baidu.com/s/1o7VEPbO + + install it and run it: + + $ DebugServerConsole -ddc -rstwait 1000 -prereset -port 1025 + +2. Prepare the nfs-server in your linux PC. You can get the step in google, we + don't mention it here. + + Then extract output/images/rootfs.tar to your nfsroot. + +3. Modified the bootargs in board/csky/<board>/<board>.dts'. You should + specify the correct nfsroot= and ip=, for example in gx6605s.dts: + + chosen { + bootargs = "console=ttyS0,115200 init=/sbin/init root=/dev/nfs\ +rw nfsroot=192.168.101.230:/opt/nfs/test,v3,tcp,nolock ip=192.168.101.25"; + } + + You need cd to buildroot dir and '$ make' again to update the dts in + output/images + + +4. Setup the Console with the rate 115200/8-N-1. + +5. cd to the output/images and run. + + For gx6605s, you need plug a usb ethernet card: + $csky-linux-gdb vmlinux + +Finish +====== + +Any question contact me here: + +ren_guo at c-sky.com + +----------- +Best Regards + +Guo Ren +configs/csky_gx6605s_defconfig new file +19
-0@@ -0,0 +1,19 @@ +BR2_csky=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y +BR2_TOOLCHAIN_EXTERNAL_URL="https://github.com/c-sky/tools/raw/master/csky-linux-tools-x86_64-glibc-linux-4.9.2-20170227.tar.gz" +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="csky-linux" +BR2_TOOLCHAIN_EXTERNAL_GCC_4_5=y +BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_9=y +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y +BR2_TOOLCHAIN_EXTERNAL_CXX=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/csky/post-image.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="gx6605s" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/c-sky/linux-4.9.y/archive/HEAD.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="gx66xx" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="gx6605s"
PATCH 2/4 csky: Add new architecture
In reply to Guo RenThis is a basic implement for C-SKY, we use pre-build-toolchain from url, and csky-toolchain open-source is on going.
Signed-off-by Guo Ren <[email protected]>
--- arch/Config.in | 12 ++++++++++++ arch/Config.in.csky | 45 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+) create mode 100644 arch/Config.in.csky
arch/Config.in +12 -0
@@ -85,6 +85,14 @@ config BR2_bfin http://www.analog.com/ http://en.wikipedia.org/wiki/Blackfin +config BR2_csky + bool "csky" + select BR2_ARCH_HAS_MMU_MANDATORY + help + csky is processor IP from china. + http://www.c-sky.com/ + http://www.github.com/c-sky + config BR2_i386 bool "i386" select BR2_ARCH_HAS_MMU_MANDATORY
@@ -369,6 +377,10 @@ if BR2_bfin source "arch/Config.in.bfin" endif +if BR2_csky +source "arch/Config.in.csky" +endif + if BR2_m68k source "arch/Config.in.m68k" endif
arch/Config.in.csky new file +45 -0
45 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH 3/4 toolchain: only external toolchain option displayed
In reply to Guo RenCurrently csky architecture isn't support the "internal toolchain backend", so we disable it in config.
Signed-off-by Guo Ren <[email protected]>
--- toolchain/Config.in | 1 + 1 file changed, 1 insertion(+)
toolchain/Config.in +1 -0
@@ -46,6 +46,7 @@ config BR2_TOOLCHAIN_BUILDROOT depends on !BR2_bf607 depends on !BR2_bf608 depends on !BR2_bf609 + depends on !BR2_csky config BR2_TOOLCHAIN_EXTERNAL bool "External toolchain"
Signature · 1 line
1.9.1
PATCH 3/4 toolchain: only external toolchain option displayed
Hello,
Quoted 4 lines · Guo Ren
Currently csky architecture isn't support the "internal toolchain backend", so we disable it in config.
Signed-off-by Guo Ren <[email protected]>
This patch should be squashed into PATCH 2/4. If you don't do that and I commit only PATCH 2/4, then things are broken, because the csky architecture is added, but we don't prevent users from trying to build an internal toolchain.
Thanks,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
PATCH 4/4 DEVELOPERS: add csky developer
In reply to Guo RenYou can get more info from github.com/c-sky.
Signed-off-by Guo Ren <[email protected]>
--- DEVELOPERS | 5 +++++ 1 file changed, 5 insertions(+)
DEVELOPERS +5 -0
@@ -592,6 +592,11 @@ F: package/sdl2/ N: Guillaume William Brs <[email protected]> F: package/liquid-dsp/ +N: Guo Ren <[email protected]> +F: arch/Config.in.csky +F: board/csky +F: configs/csky_* + N: Gustavo Zacarias <[email protected]> F: arch/Config.in.powerpc F: board/qemu/
Signature · 1 line
1.9.1
PATCH 4/4 DEVELOPERS: add csky developer
Hello,
Quoted 12 lines · Guo Ren
You can get more info from github.com/c-sky.
Signed-off-by Guo Ren <[email protected]>--- DEVELOPERS | 5 +++++ 1 file changed, 5 insertions(+)DEVELOPERS +0
-0
DEVELOPERS F: package/sdl2/ · line 596
Quoted 5 lines
DEVELOPERS +2
-0@@ -592,6 +592,11 @@ F: package/sdl2/ N: Guillaume William Brs <[email protected]> F: package/liquid-dsp/ +N: Guo Ren <[email protected]> +F: arch/Config.in.csky
This should be part of the patch adding the architecture.
DEVELOPERS F: package/sdl2/ · line 598
Quoted 2 lines
DEVELOPERS +2
-0+F: board/csky +F: configs/csky_*
And this of the patch adding the board.
But overall: this series looks almost good to go. I think the next iteration will be OK. Thanks a lot!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
PATCH 1/4 configs: add defconfig for Nationalchip gx6605s dev board.
In reply to Guo RenHello,
Quoted 3 lines · Guo Ren
gx6605s is a nice SOC for dvbs2 DVB product, and C-SKY inside.
Signed-off-by Guo Ren <[email protected]>
Thanks. This patch shouldn't come first in the series: it depends on the csky architecture being added. So the series should have the patch adding the architecture first, and then a patch adding the board.
Quoted 4 lines
board/csky/gx6605s/gdbinit | 25 ++ board/csky/gx6605s/gx6605s.dts | 56 ++++ board/csky/gx6605s/gx6622.dts | 56 ++++ board/csky/gx6605s/gx66xx_defconfig | 525 ++++++++++++++++++++++++++++++++++++
I think I suggested in the previous review that those .dts and defconfig should not be in Buildroot, but instead inside your kernel tree.
Quoted 12 lines
configs/csky_gx6605s_defconfig new file +6
-0@@ -0,0 +1,19 @@ +BR2_csky=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y +BR2_TOOLCHAIN_EXTERNAL_URL="https://github.com/c-sky/tools/raw/master/csky-linux-tools-x86_64-glibc-linux-4.9.2-20170227.tar.gz" +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="csky-linux" +BR2_TOOLCHAIN_EXTERNAL_GCC_4_5=y
configs/csky_gx6605s_defconfig line 16
Quoted 10 lines
configs/csky_gx6605s_defconfig new file +10
-0+BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_9=y +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y +BR2_TOOLCHAIN_EXTERNAL_CXX=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/csky/post-image.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="gx6605s" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/c-sky/linux-4.9.y/archive/HEAD.tar.gz"
Don't use "HEAD" as HEAD is a moving thing. Use a fixed commit hash.
configs/csky_gx6605s_defconfig line 17
Quoted 1 line
configs/csky_gx6605s_defconfig new file +1
-0+BR2_LINUX_KERNEL_DEFCONFIG="gx66xx"
So you're using the defconfig from the kernel tree itself... so why do you have still include it in your patch?
configs/csky_gx6605s_defconfig line 19
Quoted 2 lines
configs/csky_gx6605s_defconfig new file +2
-0+BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="gx6605s"
Same here: why do you still have .dts files in your patch, since you're using the .dts from your kernel tree?
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com