Skip to contentSkip to conversation

drm/i915: CCS prep stuff

PATCH In review [email protected] 3 participants 12 messages Mar 7, 2017 – Mar 8, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover drm/i915: CCS prep stuff

From: Ville Syrjälä <[email protected]>

Already reviewed prep stuff for CCS. Posting it separately so that I can push it if/when CI gives the green light.

Ville Syrjälä (5):
drm/i915: Plumb drm_framebuffer into more places
drm/i915: Move nv12 chroma plane handling into intel_surf_alignment() drm/i915: Avoid div-by-zero when computing aux_stride w/o an aux plane drm/i915: Pass the correct plane index to _intel_compute_tile_offset() drm/i915: Use DRM_DEBUG_KMS() for framebuffer failure debug messages

 drivers/gpu/drm/i915/intel_display.c | 213 ++++++++++++++++-------------------
 drivers/gpu/drm/i915/intel_drv.h     |  11 +-
 drivers/gpu/drm/i915/intel_fbdev.c   |   4 +-
 3 files changed, 99 insertions(+), 129 deletions(-)
Signature · 6 lines
2.10.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 1/5 drm/i915: Plumb drm_framebuffer into more places

From: Ville Syrjälä <[email protected]>

Now that framebuffers can be used even before calling drm_framebuffer_init() we can start to plumb them into more places, instead of passing individual pieces for fb metadata.

---
 drivers/gpu/drm/i915/intel_display.c | 132 ++++++++++++++---------------------
 drivers/gpu/drm/i915/intel_drv.h     |  11 +--
 drivers/gpu/drm/i915/intel_fbdev.c   |   4 +-
 3 files changed, 57 insertions(+), 90 deletions(-)
drivers/gpu/drm/i915/intel_display.c +54 -78
index e77ca7dfa44d..d97f3f3554e4 100644
@@ -1990,10 +1990,13 @@ static unsigned int intel_tile_size(const struct drm_i915_private *dev_priv)
 	return IS_GEN2(dev_priv) ? 2048 : 4096;
 }
 
-static unsigned int intel_tile_width_bytes(const struct drm_i915_private *dev_priv,
-					   uint64_t fb_modifier, unsigned int cpp)
+static unsigned int
+intel_tile_width_bytes(const struct drm_framebuffer *fb, int plane)
 {
-	switch (fb_modifier) {
+	struct drm_i915_private *dev_priv = to_i915(fb->dev);
+	unsigned int cpp = fb->format->cpp[plane];
+
+	switch (fb->modifier) {
 	case DRM_FORMAT_MOD_NONE:
 		return cpp;
 	case I915_FORMAT_MOD_X_TILED:
@@ -2022,43 +2025,38 @@ static unsigned int intel_tile_width_bytes(const struct drm_i915_private *dev_pr
 		}
 		break;
 	default:
-		MISSING_CASE(fb_modifier);
+		MISSING_CASE(fb->modifier);
 		return cpp;
 	}
 }
 
-unsigned int intel_tile_height(const struct drm_i915_private *dev_priv,
-			       uint64_t fb_modifier, unsigned int cpp)
+static unsigned int
+intel_tile_height(const struct drm_framebuffer *fb, int plane)
 {
-	if (fb_modifier == DRM_FORMAT_MOD_NONE)
+	if (fb->modifier == DRM_FORMAT_MOD_NONE)
 		return 1;
 	else
-		return intel_tile_size(dev_priv) /
-			intel_tile_width_bytes(dev_priv, fb_modifier, cpp);
+		return intel_tile_size(to_i915(fb->dev)) /
+			intel_tile_width_bytes(fb, plane);
 }
 
 /* Return the tile dimensions in pixel units */
-static void intel_tile_dims(const struct drm_i915_private *dev_priv,
+static void intel_tile_dims(const struct drm_framebuffer *fb, int plane,
 			    unsigned int *tile_width,
-			    unsigned int *tile_height,
-			    uint64_t fb_modifier,
-			    unsigned int cpp)
+			    unsigned int *tile_height)
 {
-	unsigned int tile_width_bytes =
-		intel_tile_width_bytes(dev_priv, fb_modifier, cpp);
+	unsigned int tile_width_bytes = intel_tile_width_bytes(fb, plane);
+	unsigned int cpp = fb->format->cpp[plane];
 
 	*tile_width = tile_width_bytes / cpp;
-	*tile_height = intel_tile_size(dev_priv) / tile_width_bytes;
+	*tile_height = intel_tile_size(to_i915(fb->dev)) / tile_width_bytes;
 }
 
 unsigned int
-intel_fb_align_height(struct drm_i915_private *dev_priv,
-		      unsigned int height,
-		      uint32_t pixel_format,
-		      uint64_t fb_modifier)
+intel_fb_align_height(const struct drm_framebuffer *fb,
+		      int plane, unsigned int height)
 {
-	unsigned int cpp = drm_format_plane_cpp(pixel_format, 0);
-	unsigned int tile_height = intel_tile_height(dev_priv, fb_modifier, cpp);
+	unsigned int tile_height = intel_tile_height(fb, plane);
 
 	return ALIGN(height, tile_height);
 }
@@ -2099,21 +2097,23 @@ static unsigned int intel_linear_alignment(const struct drm_i915_private *dev_pr
 		return 0;
 }
 
-static unsigned int intel_surf_alignment(const struct drm_i915_private *dev_priv,
-					 uint64_t fb_modifier)
+static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,
+					 int plane)
 {
-	switch (fb_modifier) {
+	struct drm_i915_private *dev_priv = to_i915(fb->dev);
+
+	switch (fb->modifier) {
 	case DRM_FORMAT_MOD_NONE:
 		return intel_linear_alignment(dev_priv);
 	case I915_FORMAT_MOD_X_TILED:
-		if (INTEL_INFO(dev_priv)->gen >= 9)
+		if (INTEL_GEN(dev_priv) >= 9)
 			return 256 * 1024;
 		return 0;
 	case I915_FORMAT_MOD_Y_TILED:
 	case I915_FORMAT_MOD_Yf_TILED:
 		return 1 * 1024 * 1024;
 	default:
-		MISSING_CASE(fb_modifier);
+		MISSING_CASE(fb->modifier);
 		return 0;
 	}
 }
@@ -2130,7 +2130,7 @@ intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb, unsigned int rotation)
 
 	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
 
-	alignment = intel_surf_alignment(dev_priv, fb->modifier);
+	alignment = intel_surf_alignment(fb, 0);
 
 	intel_fill_fb_ggtt_view(&view, fb, rotation);
 
@@ -2291,8 +2291,7 @@ static u32 intel_adjust_tile_offset(int *x, int *y,
 		unsigned int pitch_tiles;
 
 		tile_size = intel_tile_size(dev_priv);
-		intel_tile_dims(dev_priv, &tile_width, &tile_height,
-				fb->modifier, cpp);
+		intel_tile_dims(fb, plane, &tile_width, &tile_height);
 
 		if (drm_rotation_90_or_270(rotation)) {
 			pitch_tiles = pitch / tile_height;
@@ -2347,8 +2346,7 @@ static u32 _intel_compute_tile_offset(const struct drm_i915_private *dev_priv,
 		unsigned int tile_rows, tiles, pitch_tiles;
 
 		tile_size = intel_tile_size(dev_priv);
-		intel_tile_dims(dev_priv, &tile_width, &tile_height,
-				fb_modifier, cpp);
+		intel_tile_dims(fb, plane, &tile_width, &tile_height);
 
 		if (drm_rotation_90_or_270(rotation)) {
 			pitch_tiles = pitch / tile_height;
@@ -2394,7 +2392,7 @@ u32 intel_compute_tile_offset(int *x, int *y,
 	if (fb->format->format == DRM_FORMAT_NV12 && plane == 1)
 		alignment = 4096;
 	else
-		alignment = intel_surf_alignment(dev_priv, fb->modifier);
+		alignment = intel_surf_alignment(fb, plane);
 
 	return _intel_compute_tile_offset(dev_priv, x, y, fb, plane, pitch,
 					  rotation, alignment);
@@ -2480,8 +2478,7 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,
 			unsigned int pitch_tiles;
 			struct drm_rect r;
 
-			intel_tile_dims(dev_priv, &tile_width, &tile_height,
-					fb->modifier, cpp);
+			intel_tile_dims(fb, i, &tile_width, &tile_height);
 
 			rot_info->plane[i].offset = offset;
 			rot_info->plane[i].stride = DIV_ROUND_UP(fb->pitches[i], tile_width * cpp);
@@ -2846,7 +2843,6 @@ static int skl_max_plane_width(const struct drm_framebuffer *fb, int plane,
 
 static int skl_check_main_surface(struct intel_plane_state *plane_state)
 {
-	const struct drm_i915_private *dev_priv = to_i915(plane_state->base.plane->dev);
 	const struct drm_framebuffer *fb = plane_state->base.fb;
 	unsigned int rotation = plane_state->base.rotation;
 	int x = plane_state->base.src.x1 >> 16;
@@ -2865,8 +2861,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 
 	intel_add_fb_offsets(&x, &y, plane_state, 0);
 	offset = intel_compute_tile_offset(&x, &y, plane_state, 0);
-
-	alignment = intel_surf_alignment(dev_priv, fb->modifier);
+	alignment = intel_surf_alignment(fb, 0);
 
 	/*
 	 * AUX surface offset is specified as the distance from the
@@ -3186,16 +3181,13 @@ static void ironlake_update_primary_plane(struct drm_plane *primary,
 	POSTING_READ(reg);
 }
 
-u32 intel_fb_stride_alignment(const struct drm_i915_private *dev_priv,
-			      uint64_t fb_modifier, uint32_t pixel_format)
+static u32
+intel_fb_stride_alignment(const struct drm_framebuffer *fb, int plane)
 {
-	if (fb_modifier == DRM_FORMAT_MOD_NONE) {
+	if (fb->modifier == DRM_FORMAT_MOD_NONE)
 		return 64;
-	} else {
-		int cpp = drm_format_plane_cpp(pixel_format, 0);
-
-		return intel_tile_width_bytes(dev_priv, fb_modifier, cpp);
-	}
+	else
+		return intel_tile_width_bytes(fb, plane);
 }
 
 static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
@@ -3228,21 +3220,16 @@ static void skl_detach_scalers(struct intel_crtc *intel_crtc)
 u32 skl_plane_stride(const struct drm_framebuffer *fb, int plane,
 		     unsigned int rotation)
 {
-	const struct drm_i915_private *dev_priv = to_i915(fb->dev);
 	u32 stride = intel_fb_pitch(fb, plane, rotation);
 
 	/*
 	 * The stride is either expressed as a multiple of 64 bytes chunks for
 	 * linear buffers or in number of tiles for tiled buffers.
 	 */
-	if (drm_rotation_90_or_270(rotation)) {
-		int cpp = fb->format->cpp[plane];
-
-		stride /= intel_tile_height(dev_priv, fb->modifier, cpp);
-	} else {
-		stride /= intel_fb_stride_alignment(dev_priv, fb->modifier,
-						    fb->format->format);
-	}
+	if (drm_rotation_90_or_270(rotation))
+		stride /= intel_tile_height(fb, plane);
+	else
+		stride /= intel_fb_stride_alignment(fb, plane);
 
 	return stride;
 }
@@ -7388,10 +7375,7 @@ i9xx_get_initial_plane_config(struct intel_crtc *crtc,
 	val = I915_READ(DSPSTRIDE(pipe));
 	fb->pitches[0] = val & 0xffffffc0;
 
-	aligned_height = intel_fb_align_height(dev_priv,
-					       fb->height,
-					       fb->format->format,
-					       fb->modifier);
+	aligned_height = intel_fb_align_height(fb, 0, fb->height);
 
 	plane_config->size = fb->pitches[0] * aligned_height;
 
@@ -8426,14 +8410,10 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
 	fb->width = ((val >> 0) & 0x1fff) + 1;
 
 	val = I915_READ(PLANE_STRIDE(pipe, 0));
-	stride_mult = intel_fb_stride_alignment(dev_priv, fb->modifier,
-						fb->format->format);
+	stride_mult = intel_fb_stride_alignment(fb, 0);
 	fb->pitches[0] = (val & 0x3ff) * stride_mult;
 
-	aligned_height = intel_fb_align_height(dev_priv,
-					       fb->height,
-					       fb->format->format,
-					       fb->modifier);
+	aligned_height = intel_fb_align_height(fb, 0, fb->height);
 
 	plane_config->size = fb->pitches[0] * aligned_height;
 
@@ -8529,10 +8509,7 @@ ironlake_get_initial_plane_config(struct intel_crtc *crtc,
 	val = I915_READ(DSPSTRIDE(pipe));
 	fb->pitches[0] = val & 0xffffffc0;
 
-	aligned_height = intel_fb_align_height(dev_priv,
-					       fb->height,
-					       fb->format->format,
-					       fb->modifier);
+	aligned_height = intel_fb_align_height(fb, 0, fb->height);
 
 	plane_config->size = fb->pitches[0] * aligned_height;
 
@@ -14368,15 +14345,6 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
 		goto err;
 	}
 
-	stride_alignment = intel_fb_stride_alignment(dev_priv,
-						     mode_cmd->modifier[0],
-						     mode_cmd->pixel_format);
-	if (mode_cmd->pitches[0] & (stride_alignment - 1)) {
-		DRM_DEBUG("pitch (%d) must be at least %u byte aligned\n",
-			  mode_cmd->pitches[0], stride_alignment);
-		goto err;
-	}
-
 	pitch_limit = intel_fb_pitch_limit(dev_priv, mode_cmd->modifier[0],
 					   mode_cmd->pixel_format);
 	if (mode_cmd->pitches[0] > pitch_limit) {
@@ -14457,6 +14425,14 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
 
 	drm_helper_mode_fill_fb_struct(&dev_priv->drm,
 				       &intel_fb->base, mode_cmd);
+
+	stride_alignment = intel_fb_stride_alignment(&intel_fb->base, 0);
+	if (mode_cmd->pitches[0] & (stride_alignment - 1)) {
+		DRM_DEBUG("pitch (%d) must be at least %u byte aligned\n",
+			  mode_cmd->pitches[0], stride_alignment);
+		goto err;
+	}
+
 	intel_fb->obj = obj;
 
 	ret = intel_fill_fb_info(dev_priv, &intel_fb->base);
drivers/gpu/drm/i915/intel_drv.h +2 -9
index 3af20c1f2ba8..578f7d20501f 100644
@@ -1250,12 +1250,8 @@ void intel_ddi_set_vc_payload_alloc(const struct intel_crtc_state *crtc_state,
 uint32_t ddi_signal_levels(struct intel_dp *intel_dp);
 u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder);
 
-unsigned int intel_fb_align_height(struct drm_i915_private *dev_priv,
-				   unsigned int height,
-				   uint32_t pixel_format,
-				   uint64_t fb_format_modifier);
-u32 intel_fb_stride_alignment(const struct drm_i915_private *dev_priv,
-			      uint64_t fb_modifier, uint32_t pixel_format);
+unsigned int intel_fb_align_height(const struct drm_framebuffer *fb,
+				   int plane, unsigned int height);
 
 /* intel_audio.c */
 void intel_init_audio_hooks(struct drm_i915_private *dev_priv);
@@ -1384,9 +1380,6 @@ int intel_plane_atomic_set_property(struct drm_plane *plane,
 int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
 				    struct drm_plane_state *plane_state);
 
-unsigned int intel_tile_height(const struct drm_i915_private *dev_priv,
-			       uint64_t fb_modifier, unsigned int cpp);
-
 void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
 				    enum pipe pipe);
 
drivers/gpu/drm/i915/intel_fbdev.c +1 -3
index f7e9a4e69595..332254a8eebe 100644
@@ -619,9 +619,7 @@ static bool intel_fbdev_init_bios(struct drm_device *dev,
 		}
 
 		cur_size = intel_crtc->config->base.adjusted_mode.crtc_vdisplay;
-		cur_size = intel_fb_align_height(to_i915(dev), cur_size,
-						 fb->base.format->format,
-						 fb->base.modifier);
+		cur_size = intel_fb_align_height(&fb->base, 0, cur_size);
 		cur_size *= fb->base.pitches[0];
 		DRM_DEBUG_KMS("pipe %c area: %dx%d, bpp: %d, size: %d\n",
 			      pipe_name(intel_crtc->pipe),
Signature · 6 lines
2.10.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH 2/5 drm/i915: Move nv12 chroma plane handling into intel_surf_alignment()

In reply to [email protected]

From: Ville Syrjälä <[email protected]>

Let's try to keep the alignment requirements in one place, and so towards that end let's move the AUX_DIST alignment handling into intel_surf_alignment() alongside the main surface alignment stuff.

---
 drivers/gpu/drm/i915/intel_display.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_display.c +5 -7
index d97f3f3554e4..f0da21327198 100644
@@ -2102,6 +2102,10 @@ static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,
 {
 	struct drm_i915_private *dev_priv = to_i915(fb->dev);
 
+	/* AUX_DIST needs only 4K alignment */
+	if (fb->format->format == DRM_FORMAT_NV12 && plane == 1)
+		return 4096;
+
 	switch (fb->modifier) {
 	case DRM_FORMAT_MOD_NONE:
 		return intel_linear_alignment(dev_priv);
@@ -2386,13 +2390,7 @@ u32 intel_compute_tile_offset(int *x, int *y,
 	const struct drm_framebuffer *fb = state->base.fb;
 	unsigned int rotation = state->base.rotation;
 	int pitch = intel_fb_pitch(fb, plane, rotation);
-	u32 alignment;
-
-	/* AUX_DIST needs only 4K alignment */
-	if (fb->format->format == DRM_FORMAT_NV12 && plane == 1)
-		alignment = 4096;
-	else
-		alignment = intel_surf_alignment(fb, plane);
+	u32 alignment = intel_surf_alignment(fb, plane);
 
 	return _intel_compute_tile_offset(dev_priv, x, y, fb, plane, pitch,
 					  rotation, alignment);
Signature · 6 lines
2.10.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

PATCH 3/5 drm/i915: Avoid div-by-zero when computing aux_stride w/o an aux plane

In reply to [email protected]

From: Ville Syrjälä <[email protected]>

To make life easier let's allow skl_plane_stride() to be called for the AUX surface even when there is no AUX surface. Avoids special cases in the callers.

---
 drivers/gpu/drm/i915/intel_display.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_display.c +6 -1
index f0da21327198..ffa1041e10b9 100644
@@ -3218,7 +3218,12 @@ static void skl_detach_scalers(struct intel_crtc *intel_crtc)
 u32 skl_plane_stride(const struct drm_framebuffer *fb, int plane,
 		     unsigned int rotation)
 {
-	u32 stride = intel_fb_pitch(fb, plane, rotation);
+	u32 stride;
+
+	if (plane >= fb->format->num_planes)
+		return 0;
+
+	stride = intel_fb_pitch(fb, plane, rotation);
 
 	/*
 	 * The stride is either expressed as a multiple of 64 bytes chunks for
Signature · 6 lines
2.10.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH 4/5 drm/i915: Pass the correct plane index to _intel_compute_tile_offset()

In reply to [email protected]

From: Ville Syrjälä <[email protected]>

intel_fill_fb_info() should pass the correct plane index to _intel_compute_tile_offset() once we start to care about the AUX surface.

---
 drivers/gpu/drm/i915/intel_display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_display.c +1 -1
index ffa1041e10b9..90e6403b0324 100644
@@ -2467,7 +2467,7 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,
 		intel_fb->normal[i].y = y;
 
 		offset = _intel_compute_tile_offset(dev_priv, &x, &y,
-						    fb, 0, fb->pitches[i],
+						    fb, i, fb->pitches[i],
 						    DRM_ROTATE_0, tile_size);
 		offset /= tile_size;
 
Signature · 6 lines
2.10.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

PATCH v2 5/5 drm/i915: Use DRM_DEBUG_KMS() for framebuffer failure debug messages

In reply to [email protected]

From: Ville Syrjälä <[email protected]>

DRM_UT_CORE generates way too much noise usually, so having the framebuffer init failures use DRM_UT_CORE is a pain when trying to find out the reason why you failed in creating a framebuffer. Let's use DRM_UT_KMS for these debug messages instead.

v2: s/at less than/at most/ in the debug message (Imre)

---
 drivers/gpu/drm/i915/intel_display.c | 66 ++++++++++++++++++------------------
 1 file changed, 33 insertions(+), 33 deletions(-)
drivers/gpu/drm/i915/intel_display.c +33 -33
index 90e6403b0324..060b6989c4da 100644
@@ -2454,8 +2454,8 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,
 		 */
 		if (i915_gem_object_is_tiled(intel_fb->obj) &&
 		    (x + width) * cpp > fb->pitches[i]) {
-			DRM_DEBUG("bad fb plane %d offset: 0x%x\n",
-				  i, fb->offsets[i]);
+			DRM_DEBUG_KMS("bad fb plane %d offset: 0x%x\n",
+				      i, fb->offsets[i]);
 			return -EINVAL;
 		}
 
@@ -2537,9 +2537,9 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,
 		max_size = max(max_size, offset + size);
 	}
 
-	if (max_size * tile_size > to_intel_framebuffer(fb)->obj->base.size) {
-		DRM_DEBUG("fb too big for bo (need %u bytes, have %zu bytes)\n",
-			  max_size * tile_size, to_intel_framebuffer(fb)->obj->base.size);
+	if (max_size * tile_size > intel_fb->obj->base.size) {
+		DRM_DEBUG_KMS("fb too big for bo (need %u bytes, have %zu bytes)\n",
+			      max_size * tile_size, intel_fb->obj->base.size);
 		return -EINVAL;
 	}
 
@@ -14308,14 +14308,14 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
 		 */
 		if (tiling != I915_TILING_NONE &&
 		    tiling != intel_fb_modifier_to_tiling(mode_cmd->modifier[0])) {
-			DRM_DEBUG("tiling_mode doesn't match fb modifier\n");
+			DRM_DEBUG_KMS("tiling_mode doesn't match fb modifier\n");
 			goto err;
 		}
 	} else {
 		if (tiling == I915_TILING_X) {
 			mode_cmd->modifier[0] = I915_FORMAT_MOD_X_TILED;
 		} else if (tiling == I915_TILING_Y) {
-			DRM_DEBUG("No Y tiling for legacy addfb\n");
+			DRM_DEBUG_KMS("No Y tiling for legacy addfb\n");
 			goto err;
 		}
 	}
@@ -14325,16 +14325,16 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
 	case I915_FORMAT_MOD_Y_TILED:
 	case I915_FORMAT_MOD_Yf_TILED:
 		if (INTEL_GEN(dev_priv) < 9) {
-			DRM_DEBUG("Unsupported tiling 0x%llx!\n",
-				  mode_cmd->modifier[0]);
+			DRM_DEBUG_KMS("Unsupported tiling 0x%llx!\n",
+				      mode_cmd->modifier[0]);
 			goto err;
 		}
 	case DRM_FORMAT_MOD_NONE:
 	case I915_FORMAT_MOD_X_TILED:
 		break;
 	default:
-		DRM_DEBUG("Unsupported fb modifier 0x%llx!\n",
-			  mode_cmd->modifier[0]);
+		DRM_DEBUG_KMS("Unsupported fb modifier 0x%llx!\n",
+			      mode_cmd->modifier[0]);
 		goto err;
 	}
 
@@ -14344,17 +14344,17 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
 	 */
 	if (INTEL_INFO(dev_priv)->gen < 4 &&
 	    tiling != intel_fb_modifier_to_tiling(mode_cmd->modifier[0])) {
-		DRM_DEBUG("tiling_mode must match fb modifier exactly on gen2/3\n");
+		DRM_DEBUG_KMS("tiling_mode must match fb modifier exactly on gen2/3\n");
 		goto err;
 	}
 
 	pitch_limit = intel_fb_pitch_limit(dev_priv, mode_cmd->modifier[0],
 					   mode_cmd->pixel_format);
 	if (mode_cmd->pitches[0] > pitch_limit) {
-		DRM_DEBUG("%s pitch (%u) must be at less than %d\n",
-			  mode_cmd->modifier[0] != DRM_FORMAT_MOD_NONE ?
-			  "tiled" : "linear",
-			  mode_cmd->pitches[0], pitch_limit);
+		DRM_DEBUG_KMS("%s pitch (%u) must be at most %d\n",
+			      mode_cmd->modifier[0] != DRM_FORMAT_MOD_NONE ?
+			      "tiled" : "linear",
+			      mode_cmd->pitches[0], pitch_limit);
 		goto err;
 	}
 
@@ -14362,9 +14362,9 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
 	 * If there's a fence, enforce that
 	 * the fb pitch and fence stride match.
 	 */
-	if (tiling != I915_TILING_NONE && mode_cmd->pitches[0] !=  stride) {
-		DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n",
-			  mode_cmd->pitches[0], stride);
+	if (tiling != I915_TILING_NONE && mode_cmd->pitches[0] != stride) {
+		DRM_DEBUG_KMS("pitch (%d) must match tiling stride (%d)\n",
+			      mode_cmd->pitches[0], stride);
 		goto err;
 	}
 
@@ -14377,16 +14377,16 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
 		break;
 	case DRM_FORMAT_XRGB1555:
 		if (INTEL_GEN(dev_priv) > 3) {
-			DRM_DEBUG("unsupported pixel format: %s\n",
-			          drm_get_format_name(mode_cmd->pixel_format, &format_name));
+			DRM_DEBUG_KMS("unsupported pixel format: %s\n",
+				      drm_get_format_name(mode_cmd->pixel_format, &format_name));
 			goto err;
 		}
 		break;
 	case DRM_FORMAT_ABGR8888:
 		if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv) &&
 		    INTEL_GEN(dev_priv) < 9) {
-			DRM_DEBUG("unsupported pixel format: %s\n",
-			          drm_get_format_name(mode_cmd->pixel_format, &format_name));
+			DRM_DEBUG_KMS("unsupported pixel format: %s\n",
+				      drm_get_format_name(mode_cmd->pixel_format, &format_name));
 			goto err;
 		}
 		break;
@@ -14394,15 +14394,15 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
 	case DRM_FORMAT_XRGB2101010:
 	case DRM_FORMAT_XBGR2101010:
 		if (INTEL_GEN(dev_priv) < 4) {
-			DRM_DEBUG("unsupported pixel format: %s\n",
-			          drm_get_format_name(mode_cmd->pixel_format, &format_name));
+			DRM_DEBUG_KMS("unsupported pixel format: %s\n",
+				      drm_get_format_name(mode_cmd->pixel_format, &format_name));
 			goto err;
 		}
 		break;
 	case DRM_FORMAT_ABGR2101010:
 		if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) {
-			DRM_DEBUG("unsupported pixel format: %s\n",
-			          drm_get_format_name(mode_cmd->pixel_format, &format_name));
+			DRM_DEBUG_KMS("unsupported pixel format: %s\n",
+				      drm_get_format_name(mode_cmd->pixel_format, &format_name));
 			goto err;
 		}
 		break;
@@ -14411,14 +14411,14 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
 	case DRM_FORMAT_YVYU:
 	case DRM_FORMAT_VYUY:
 		if (INTEL_GEN(dev_priv) < 5) {
-			DRM_DEBUG("unsupported pixel format: %s\n",
-			          drm_get_format_name(mode_cmd->pixel_format, &format_name));
+			DRM_DEBUG_KMS("unsupported pixel format: %s\n",
+				      drm_get_format_name(mode_cmd->pixel_format, &format_name));
 			goto err;
 		}
 		break;
 	default:
-		DRM_DEBUG("unsupported pixel format: %s\n",
-		          drm_get_format_name(mode_cmd->pixel_format, &format_name));
+		DRM_DEBUG_KMS("unsupported pixel format: %s\n",
+			      drm_get_format_name(mode_cmd->pixel_format, &format_name));
 		goto err;
 	}
 
@@ -14431,8 +14431,8 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
 
 	stride_alignment = intel_fb_stride_alignment(&intel_fb->base, 0);
 	if (mode_cmd->pitches[0] & (stride_alignment - 1)) {
-		DRM_DEBUG("pitch (%d) must be at least %u byte aligned\n",
-			  mode_cmd->pitches[0], stride_alignment);
+		DRM_DEBUG_KMS("pitch (%d) must be at least %u byte aligned\n",
+			      mode_cmd->pitches[0], stride_alignment);
 		goto err;
 	}
 
Signature · 6 lines
2.10.2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

✗ Fi.CI.BAT: warning for drm/i915: CCS prep stuff

In reply to [email protected]
== Series Details ==

== Series Details ==

Series: drm/i915: CCS prep stuff
URL : https://patchwork.freedesktop.org/series/20851/
State : warning

== Summary ==

Series 20851v1 drm/i915: CCS prep stuff
https://patchwork.freedesktop.org/api/1.0/series/20851/revisions/1/mbox/

Test gem_exec_flush:

        Subgroup basic-batch-kernel-default-uc:
                fail       -> PASS       (fi-snb-2600) fdo#100007
        Subgroup basic-wb-rw-before-default:
                pass       -> INCOMPLETE (fi-skl-6700hq) fdo#100081
Test gem_exec_suspend:
        Subgroup basic-s4-devices:
                pass       -> DMESG-WARN (fi-bxt-t5700)

fdo#100007 https://bugs.freedesktop.org/show_bug.cgi?id=100007
fdo#100081 https://bugs.freedesktop.org/show_bug.cgi?id=100081

fi-bdw-5557u     total:278  pass:267  dwarn:0   dfail:0   fail:0   skip:11  time: 470s
fi-bsw-n3050     total:278  pass:239  dwarn:0   dfail:0   fail:0   skip:39  time: 611s
fi-bxt-j4205     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time: 538s
fi-bxt-t5700     total:278  pass:257  dwarn:1   dfail:0   fail:0   skip:20  time: 609s
fi-byt-j1900     total:278  pass:251  dwarn:0   dfail:0   fail:0   skip:27  time: 511s
fi-byt-n2820     total:278  pass:247  dwarn:0   dfail:0   fail:0   skip:31  time: 499s
fi-hsw-4770      total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 437s
fi-hsw-4770r     total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 435s
fi-ilk-650       total:278  pass:228  dwarn:0   dfail:0   fail:0   skip:50  time: 440s
fi-ivb-3520m     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 495s
fi-ivb-3770      total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 494s
fi-kbl-7500u     total:278  pass:259  dwarn:1   dfail:0   fail:0   skip:18  time: 475s
fi-skl-6260u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 503s
fi-skl-6700hq    total:62   pass:54   dwarn:0   dfail:0   fail:0   skip:7   time: 0s
fi-skl-6700k     total:278  pass:256  dwarn:4   dfail:0   fail:0   skip:18  time: 503s
fi-skl-6770hq    total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 545s
fi-snb-2520m     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time: 553s
fi-snb-2600      total:278  pass:249  dwarn:0   dfail:0   fail:0   skip:29  time: 431s

dcca4ca8923adc61254f23eb66ca18a4c9e1ffd3 drm-tip: 2017y-03m-07d-18h-17m-03s UTC integration manifest e02ab59 drm/i915: Use DRM_DEBUG_KMS() for framebuffer failure debug messages
98e01f1 drm/i915: Pass the correct plane index to _intel_compute_tile_offset() d44a4ff drm/i915: Avoid div-by-zero when computing aux_stride w/o an aux plane 9f610c8 drm/i915: Move nv12 chroma plane handling into intel_surf_alignment() 48539e6 drm/i915: Plumb drm_framebuffer into more places

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4088/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#7 lore raw

Re: ✗ Fi.CI.BAT: warning for drm/i915: CCS prep stuff

Quoted 11 lines · Patchwork

== Series Details ==

Series: drm/i915: CCS prep stuff
URL : https://patchwork.freedesktop.org/series/20851/
State : warning

== Summary ==

Series 20851v1 drm/i915: CCS prep stuff
https://patchwork.freedesktop.org/api/1.0/series/20851/revisions/1/mbox/

Quoted 8 lines

Test gem_exec_flush:

        Subgroup basic-batch-kernel-default-uc:
                fail       -> PASS       (fi-snb-2600) fdo#100007
        Subgroup basic-wb-rw-before-default:
                pass       -> INCOMPLETE (fi-skl-6700hq) fdo#100081
Test gem_exec_suspend:
        Subgroup basic-s4-devices:
                pass       -> DMESG-WARN (fi-bxt-t5700)
[  380.840188] [drm] Atomic update on pipe (A) took 110 us, max time under evasion is 100 us

Hmm. I wonder what we're doing in there on BXT that takes so long. Oh. I see plenty of DRM_DEBUG_KMS() calls via intel_update_pipe_config() at least. Those really need to go.

[  381.221206] WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x225/0x230

Presumably not our problem, and not the first time this has been seen either.

Quoted 33 lines

fdo#100007 https://bugs.freedesktop.org/show_bug.cgi?id=100007
fdo#100081 https://bugs.freedesktop.org/show_bug.cgi?id=100081

fi-bdw-5557u     total:278  pass:267  dwarn:0   dfail:0   fail:0   skip:11  time: 470s
fi-bsw-n3050     total:278  pass:239  dwarn:0   dfail:0   fail:0   skip:39  time: 611s
fi-bxt-j4205     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time: 538s
fi-bxt-t5700     total:278  pass:257  dwarn:1   dfail:0   fail:0   skip:20  time: 609s
fi-byt-j1900     total:278  pass:251  dwarn:0   dfail:0   fail:0   skip:27  time: 511s
fi-byt-n2820     total:278  pass:247  dwarn:0   dfail:0   fail:0   skip:31  time: 499s
fi-hsw-4770      total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 437s
fi-hsw-4770r     total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 435s
fi-ilk-650       total:278  pass:228  dwarn:0   dfail:0   fail:0   skip:50  time: 440s
fi-ivb-3520m     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 495s
fi-ivb-3770      total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 494s
fi-kbl-7500u     total:278  pass:259  dwarn:1   dfail:0   fail:0   skip:18  time: 475s
fi-skl-6260u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 503s
fi-skl-6700hq    total:62   pass:54   dwarn:0   dfail:0   fail:0   skip:7   time: 0s
fi-skl-6700k     total:278  pass:256  dwarn:4   dfail:0   fail:0   skip:18  time: 503s
fi-skl-6770hq    total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 545s
fi-snb-2520m     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time: 553s
fi-snb-2600      total:278  pass:249  dwarn:0   dfail:0   fail:0   skip:29  time: 431s

dcca4ca8923adc61254f23eb66ca18a4c9e1ffd3 drm-tip: 2017y-03m-07d-18h-17m-03s UTC integration manifest e02ab59 drm/i915: Use DRM_DEBUG_KMS() for framebuffer failure debug messages
98e01f1 drm/i915: Pass the correct plane index to _intel_compute_tile_offset() d44a4ff drm/i915: Avoid div-by-zero when computing aux_stride w/o an aux plane 9f610c8 drm/i915: Move nv12 chroma plane handling into intel_surf_alignment() 48539e6 drm/i915: Plumb drm_framebuffer into more places

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4088/

Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#8 lore raw

✗ Fi.CI.BAT: failure for drm/i915: CCS prep stuff

In reply to [email protected]
== Series Details ==

== Series Details ==

Series: drm/i915: CCS prep stuff
URL : https://patchwork.freedesktop.org/series/20851/
State : failure

== Summary ==

Series 20851v1 drm/i915: CCS prep stuff
https://patchwork.freedesktop.org/api/1.0/series/20851/revisions/1/mbox/

Test gem_exec_flush:

        Subgroup basic-uc-set-default:
                pass       -> INCOMPLETE (fi-skl-6770hq)
Test kms_force_connector_basic:
        Subgroup prune-stale-modes:
                pass       -> SKIP       (fi-ivb-3520m)
fi-bdw-5557u     total:278  pass:267  dwarn:0   dfail:0   fail:0   skip:11  time: 464s
fi-bsw-n3050     total:278  pass:239  dwarn:0   dfail:0   fail:0   skip:39  time: 614s
fi-bxt-j4205     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time: 539s
fi-bxt-t5700     total:278  pass:258  dwarn:0   dfail:0   fail:0   skip:20  time: 608s
fi-byt-j1900     total:278  pass:251  dwarn:0   dfail:0   fail:0   skip:27  time: 504s
fi-byt-n2820     total:278  pass:247  dwarn:0   dfail:0   fail:0   skip:31  time: 501s
fi-hsw-4770      total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 437s
fi-hsw-4770r     total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 437s
fi-ilk-650       total:278  pass:228  dwarn:0   dfail:0   fail:0   skip:50  time: 439s
fi-ivb-3520m     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time: 504s
fi-ivb-3770      total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 475s
fi-kbl-7500u     total:278  pass:259  dwarn:1   dfail:0   fail:0   skip:18  time: 477s
fi-skl-6260u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 506s
fi-skl-6700hq    total:278  pass:261  dwarn:0   dfail:0   fail:0   skip:17  time: 599s
fi-skl-6700k     total:278  pass:256  dwarn:4   dfail:0   fail:0   skip:18  time: 500s
fi-skl-6770hq    total:57   pass:55   dwarn:0   dfail:0   fail:0   skip:1   time: 0s
fi-snb-2520m     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time: 553s
fi-snb-2600      total:278  pass:248  dwarn:0   dfail:0   fail:1   skip:29  time: 419s

035f22af3e974f803031dc9f20e0969d5ae0a433 drm-tip: 2017y-03m-08d-11h-24m-39s UTC integration manifest 0550fc6 drm/i915: Use DRM_DEBUG_KMS() for framebuffer failure debug messages
bfff0ff drm/i915: Pass the correct plane index to _intel_compute_tile_offset() 95eb814 drm/i915: Avoid div-by-zero when computing aux_stride w/o an aux plane 036d3e5 drm/i915: Move nv12 chroma plane handling into intel_surf_alignment() ea6ee47 drm/i915: Plumb drm_framebuffer into more places

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4094/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#9 lore raw

Re: ✗ Fi.CI.BAT: failure for drm/i915: CCS prep stuff

Quoted 6 lines · Patchwork

== Series Details ==

Series: drm/i915: CCS prep stuff
URL : https://patchwork.freedesktop.org/series/20851/
State : failure

Quoted 8 lines

== Summary ==

Series 20851v1 drm/i915: CCS prep stuff
https://patchwork.freedesktop.org/api/1.0/series/20851/revisions/1/mbox/

Test gem_exec_flush:

        Subgroup basic-uc-set-default:
                pass       -> INCOMPLETE (fi-skl-6770hq)

Going to chuck this into the same bucket as
https://bugs.freedesktop.org/show_bug.cgi?id=100112

I also see a few in the skl-600hq long term results. The common pattern seems to be skl+gem_exec_flush (the specific subtest varies between runs).

Quoted 33 lines

Test kms_force_connector_basic:

        Subgroup prune-stale-modes:
                pass       -> SKIP       (fi-ivb-3520m)
fi-bdw-5557u     total:278  pass:267  dwarn:0   dfail:0   fail:0   skip:11  time: 464s
fi-bsw-n3050     total:278  pass:239  dwarn:0   dfail:0   fail:0   skip:39  time: 614s
fi-bxt-j4205     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time: 539s
fi-bxt-t5700     total:278  pass:258  dwarn:0   dfail:0   fail:0   skip:20  time: 608s
fi-byt-j1900     total:278  pass:251  dwarn:0   dfail:0   fail:0   skip:27  time: 504s
fi-byt-n2820     total:278  pass:247  dwarn:0   dfail:0   fail:0   skip:31  time: 501s
fi-hsw-4770      total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 437s
fi-hsw-4770r     total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 437s
fi-ilk-650       total:278  pass:228  dwarn:0   dfail:0   fail:0   skip:50  time: 439s
fi-ivb-3520m     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time: 504s
fi-ivb-3770      total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 475s
fi-kbl-7500u     total:278  pass:259  dwarn:1   dfail:0   fail:0   skip:18  time: 477s
fi-skl-6260u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 506s
fi-skl-6700hq    total:278  pass:261  dwarn:0   dfail:0   fail:0   skip:17  time: 599s
fi-skl-6700k     total:278  pass:256  dwarn:4   dfail:0   fail:0   skip:18  time: 500s
fi-skl-6770hq    total:57   pass:55   dwarn:0   dfail:0   fail:0   skip:1   time: 0s
fi-snb-2520m     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time: 553s
fi-snb-2600      total:278  pass:248  dwarn:0   dfail:0   fail:1   skip:29  time: 419s

035f22af3e974f803031dc9f20e0969d5ae0a433 drm-tip: 2017y-03m-08d-11h-24m-39s UTC integration manifest 0550fc6 drm/i915: Use DRM_DEBUG_KMS() for framebuffer failure debug messages
bfff0ff drm/i915: Pass the correct plane index to _intel_compute_tile_offset() 95eb814 drm/i915: Avoid div-by-zero when computing aux_stride w/o an aux plane 036d3e5 drm/i915: Move nv12 chroma plane handling into intel_surf_alignment() ea6ee47 drm/i915: Plumb drm_framebuffer into more places

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4094/

Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#10 lore raw

Re: ✗ Fi.CI.BAT: failure for drm/i915: CCS prep stuff

Quoted 16 lines · Ville Syrjälä
Quoted 6 lines · Patchwork

== Series Details ==

Series: drm/i915: CCS prep stuff
URL : https://patchwork.freedesktop.org/series/20851/
State : failure

Quoted 8 lines

== Summary ==

Series 20851v1 drm/i915: CCS prep stuff
https://patchwork.freedesktop.org/api/1.0/series/20851/revisions/1/mbox/

Test gem_exec_flush:

        Subgroup basic-uc-set-default:
                pass       -> INCOMPLETE (fi-skl-6770hq)
Quoted 6 lines

Going to chuck this into the same bucket as
https://bugs.freedesktop.org/show_bug.cgi?id=100112

I also see a few in the skl-600hq long term results. The common pattern seems to be skl+gem_exec_flush (the specific subtest varies between runs).

Afaict, it is not a i915.ko bug. It seems to be that the exit_handler in the test running is not killing off its children, and that causes piglit to wait forever. We have a workaround for that that should be hitting CI the next time it refreshes igt.
-Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#11 lore raw
In reply to [email protected]
Quoted 11 lines · On Tue, Mar 07, 2017 at 09:42:05PM +0200, [email protected] wrote:

From: Ville Syrjälä <[email protected]>

Already reviewed prep stuff for CCS. Posting it separately so that I can push it if/when CI gives the green light.

Ville Syrjälä (5):
drm/i915: Plumb drm_framebuffer into more places
drm/i915: Move nv12 chroma plane handling into intel_surf_alignment() drm/i915: Avoid div-by-zero when computing aux_stride w/o an aux plane drm/i915: Pass the correct plane index to _intel_compute_tile_offset() drm/i915: Use DRM_DEBUG_KMS() for framebuffer failure debug messages

Entire series pushed to dinq. Thanks for the review.

Quoted 8 lines
 drivers/gpu/drm/i915/intel_display.c | 213 ++++++++++++++++-------------------
 drivers/gpu/drm/i915/intel_drv.h     |  11 +-
 drivers/gpu/drm/i915/intel_fbdev.c   |   4 +-
 3 files changed, 99 insertions(+), 129 deletions(-)
Signature · 1 line
2.10.2
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx