drm/i915: SKL+ render decompression support
Subsystems (3)
v2 cover drm/i915: SKL+ render decompression support
From: Ville Syrjälä <[email protected]>
Here's the remainder of CCS scanout support. All the i915 prep stuff has now landed, and we're left with just these three patches.
What's changed since the last time?
* CCS tile is now considered to be 128Bx32 since Jason wants it that way
* A bit of polish here and there
I quickly hacked my software only CCS test to handle the new 128B concept and it seems to work. The code looks a bit funny because I now have to compute the stuff based on 128B tiles for addfb, but I still need to compute it based on 64B tiles to make the software rendering of CCS work. But it's just a test application so whatever.
Entire series can be had here:git://github.com/vsyrjala/linux.git fb_format_dedup_5_ccs_128
Ville Syrjälä (3):
drm: Add mode_config .get_format_info() hook drm/i915: Implement .get_format_info() hook for CCS drm/i915: Add render decompression support
drivers/gpu/drm/drm_fb_cma_helper.c | 2 +- drivers/gpu/drm/drm_fourcc.c | 25 ++++ drivers/gpu/drm/drm_framebuffer.c | 9 +- drivers/gpu/drm/drm_modeset_helper.c | 2 +- drivers/gpu/drm/i915/i915_reg.h | 23 +++ drivers/gpu/drm/i915/intel_display.c | 278 ++++++++++++++++++++++++++++++++--- drivers/gpu/drm/i915/intel_pm.c | 29 +++- drivers/gpu/drm/i915/intel_sprite.c | 5 + include/drm/drm_fourcc.h | 6 + include/drm/drm_mode_config.h | 14 ++ include/uapi/drm/drm_fourcc.h | 20 +++ 11 files changed, 390 insertions(+), 23 deletions(-)
Signature · 6 lines
2.10.2 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v3 1/3 drm: Add mode_config .get_format_info() hook
From: Ville Syrjälä <[email protected]>
Allow drivers to return a custom drm_format_info structure for special fb layouts. We'll use this for the compression control surface in i915.
v2: Fix drm_get_format_info() kernel doc (Laurent)
Don't pass 'dev' to the new hook (Laurent)
v3: s/compresssion/compression/ (Ben)
--- drivers/gpu/drm/drm_fb_cma_helper.c | 2 +- drivers/gpu/drm/drm_fourcc.c | 25 +++++++++++++++++++++++++ drivers/gpu/drm/drm_framebuffer.c | 9 +++++++-- drivers/gpu/drm/drm_modeset_helper.c | 2 +- include/drm/drm_fourcc.h | 6 ++++++ include/drm/drm_mode_config.h | 14 ++++++++++++++ 6 files changed, 54 insertions(+), 4 deletions(-)
drivers/gpu/drm/drm_fb_cma_helper.c +1 -1
@@ -177,7 +177,7 @@ struct drm_framebuffer *drm_fb_cma_create_with_funcs(struct drm_device *dev,int ret;int i; - info =drm_format_info (mode_cmd->pixel_format); + info =drm_get_format_info (dev, mode_cmd);if (!info)return ERR_PTR (-EINVAL );
drivers/gpu/drm/drm_fourcc.c +25 -0
@@ -199,6 +199,31 @@ const struct drm_format_info *drm_format_info(u32 format)EXPORT_SYMBOL (drm_format_info);/** +* drm_get_format_info - query information for a given framebuffer configuration +* @dev: DRM device +* @mode_cmd: metadata from the userspace fb creation request +* +* Returns: +* The instance of struct drm_format_info that describes the pixel format, or +* NULL if the format is unsupported. +*/ +const struct drm_format_info * +drm_get_format_info (struct drm_device *dev, +const struct drm_mode_fb_cmd2 *mode_cmd) +{ +const struct drm_format_info *info =NULL ; + +if (dev->mode_config.funcs->get_format_info) + info = dev->mode_config.funcs->get_format_info (mode_cmd); + +if (!info) + info =drm_format_info (mode_cmd->pixel_format); + +return info; +} +EXPORT_SYMBOL (drm_get_format_info); + +/** * drm_format_num_planes - get the number of planes for format * @format: pixel format (DRM_FORMAT_*) *
drivers/gpu/drm/drm_framebuffer.c +7 -2
@@ -126,11 +126,13 @@ int drm_mode_addfb(struct drm_device *dev,return 0 ; } -static int framebuffer_check (const struct drm_mode_fb_cmd2 *r) +static int framebuffer_check (struct drm_device *dev, +const struct drm_mode_fb_cmd2 *r) {const struct drm_format_info *info;int i; +/* check if the format is supported at all */ info =__drm_format_info (r->pixel_format & ~DRM_FORMAT_BIG_ENDIAN );if (!info) {struct drm_format_name_buf format_name;
@@ -140,6 +142,9 @@ static int framebuffer_check(const struct drm_mode_fb_cmd2 *r)return -EINVAL ; } +/* now let the driver pick its own format info */ + info =drm_get_format_info (dev, r); +if (r->width ==0 || r->width % info->hsub) {DRM_DEBUG_KMS ("bad framebuffer width %u\n" , r->width);return -EINVAL ;
@@ -263,7 +268,7 @@ drm_internal_framebuffer_create(struct drm_device *dev,return ERR_PTR (-EINVAL ); } - ret =framebuffer_check (r); + ret =framebuffer_check (dev, r);if (ret)return ERR_PTR (ret);
drivers/gpu/drm/drm_modeset_helper.c +1 -1
@@ -78,7 +78,7 @@ void drm_helper_mode_fill_fb_struct(struct drm_device *dev,int i; fb->dev = dev; - fb->format =drm_format_info (mode_cmd->pixel_format); + fb->format =drm_get_format_info (dev, mode_cmd); fb->width = mode_cmd->width; fb->height = mode_cmd->height;for (i =0 ; i <4 ; i++) {
include/drm/drm_fourcc.h +6 -0
@@ -25,6 +25,9 @@#include <linux/types.h> #include <uapi/drm/drm_fourcc.h> +struct drm_device ; +struct drm_mode_fb_cmd2 ; +/** * struct drm_format_info - information about a DRM format * @format: 4CC format identifier (DRM_FORMAT_*)
@@ -55,6 +58,9 @@ struct drm_format_name_buf {const struct drm_format_info *__drm_format_info (u32 format);const struct drm_format_info *drm_format_info (u32 format); +const struct drm_format_info * +drm_get_format_info (struct drm_device *dev, +const struct drm_mode_fb_cmd2 *mode_cmd);uint32_t drm_mode_legacy_fb_format (uint32_t bpp,uint32_t depth);int drm_format_num_planes (uint32_t format);int drm_format_plane_cpp (uint32_t format,int plane);
include/drm/drm_mode_config.h +14 -0
@@ -34,6 +34,7 @@ struct drm_file;struct drm_device ;struct drm_atomic_state ;struct drm_mode_fb_cmd2 ; +struct drm_format_info ;/** * struct drm_mode_config_funcs - basic driver provided mode setting functions
@@ -70,6 +71,19 @@ struct drm_mode_config_funcs { const struct drm_mode_fb_cmd2 *mode_cmd);/** +* @get_format_info: +* +* Allows a driver to return custom format information for special +* fb layouts (eg. ones with auxiliary compression control planes). +* +* RETURNS: +* +* The format information specific to the given fb metadata, or +* NULL if none is found. +*/ +const struct drm_format_info *(*get_format_info)(const struct drm_mode_fb_cmd2 *mode_cmd); + +/** * @output_poll_changed: * * Callback used by helpers to inform the driver of output configuration
Signature · 6 lines
2.10.2 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v4 2/3 drm/i915: Implement .get_format_info() hook for CCS
In reply to [email protected]From: Ville Syrjälä <[email protected]>
SKL+ display engine can scan out certain kinds of compressed surfaces produced by the render engine. This involved telling the display engine the location of the color control surfae (CCS) which describes which parts of the main surface are compressed and which are not. The location of CCS is provided by userspace as just another plane with its own offset.
By providing our own format information for the CCS formats, we should be able to make framebuffer_check() do the right thing for the CCS surface as well.
Note that we'll return the same format info for both Y and Yf tiled format as that's what happens with the non-CCS Y vs. Yf as well. If desired, we could potentially return a unique pointer for each pixel_format+tiling+ccs combination, in which case we immediately be able to tell if any of that stuff changed by just comparing the pointers. But that does sound a bit wasteful space wise.
v2: Drop the 'dev' argument from the hook
v3: Include the description of the CCS surface layout
v4: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)
--- drivers/gpu/drm/i915/intel_display.c | 43 ++++++++++++++++++++++++++++++++++++ include/uapi/drm/drm_fourcc.h | 20 +++++++++++++++++ 2 files changed, 63 insertions(+)
drivers/gpu/drm/i915/intel_display.c +43 -0
@@ -2420,6 +2420,48 @@ static unsigned int intel_fb_modifier_to_tiling(uint64_t fb_modifier) } } +/* +* 1 byte of CCS actually corresponds to 16x8 pixels on the main +* surface, and the memory layout for the CCS tile us 64x64 bytes. +* But since we're pretending the CCS tile is 128 bytes wide we +* adjust hsub/vsub here accordingly to 8x16 so that the +* bytes<->x/y conversions come out correct. +*/ +static const struct drm_format_info ccs_formats[] = { + { .format =DRM_FORMAT_XRGB8888 , .depth =24 , .num_planes =2 , .cpp = {4 ,1 , }, .hsub =8 , .vsub =16 , }, + { .format =DRM_FORMAT_XBGR8888 , .depth =24 , .num_planes =2 , .cpp = {4 ,1 , }, .hsub =8 , .vsub =16 , }, + { .format =DRM_FORMAT_ARGB8888 , .depth =32 , .num_planes =2 , .cpp = {4 ,1 , }, .hsub =8 , .vsub =16 , }, + { .format =DRM_FORMAT_ABGR8888 , .depth =32 , .num_planes =2 , .cpp = {4 ,1 , }, .hsub =8 , .vsub =16 , }, +}; + +static const struct drm_format_info * +lookup_format_info (const struct drm_format_info formats[], +int num_formats,u32 format) +{ +int i; + +for (i =0 ; i < num_formats; i++) { +if (formats[i].format == format) +return &formats[i]; + } + +return NULL ; +} + +static const struct drm_format_info * +intel_get_format_info (const struct drm_mode_fb_cmd2 *cmd) +{ +switch (cmd->modifier[0 ]) { +case I915_FORMAT_MOD_Y_TILED_CCS : +case I915_FORMAT_MOD_Yf_TILED_CCS: +return lookup_format_info (ccs_formats, +ARRAY_SIZE (ccs_formats), + cmd->pixel_format); +default : +return NULL ; + } +} +static int intel_fill_fb_info (struct drm_i915_private *dev_priv,struct drm_framebuffer *fb)
@@ -14482,6 +14524,7 @@ static void intel_atomic_state_free(struct drm_atomic_state *state)static const struct drm_mode_config_funcs intel_mode_funcs = { .fb_create = intel_user_framebuffer_create, + .get_format_info = intel_get_format_info, .output_poll_changed = intel_fbdev_output_poll_changed, .atomic_check = intel_atomic_check, .atomic_commit = intel_atomic_commit,
include/uapi/drm/drm_fourcc.h +20 -0
@@ -238,6 +238,26 @@ extern "C" {#define I915_FORMAT_MOD_Yf_TILED fourcc_mod_code(INTEL, 3)/* +* Intel color control surface (CCS) for render compression +* +* The framebuffer format must be one of the 8:8:8:8 RGB formats. +* The main surface will be plane index 0 and must be Y/Yf-tiled, +* the CCS will be plane index 1. +* +* Each CCS tile matches a 1024x512 pixel area of the main surface. +* To match certain aspects of the 3D hardware the CCS is +* considered to be made up of normal 128Bx32 Y tiles, Thus +* the CCS pitch must be specified in multiples of 128 bytes. +* +* In reality the CCS tile appears to be a 64Bx64 Y tile, composed +* of QWORD (8 bytes) chunks instead of OWORD (16 bytes) chunks. +* But that fact is not relevant unless the memory is accessed +* directly. +*/ +#define I915_FORMAT_MOD_Y_TILED_CCS fourcc_mod_code(INTEL, 4) +#define I915_FORMAT_MOD_Yf_TILED_CCS fourcc_mod_code(INTEL, 5) + +/* * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks * * Macroblocks are laid in a Z-shape, and each pixel data is following the
Signature · 6 lines
2.10.2 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v3 3/3 drm/i915: Add render decompression support
In reply to [email protected]From: Ville Syrjälä <[email protected]>
SKL+ display engine can scan out certain kinds of compressed surfaces produced by the render engine. This involved telling the display engine the location of the color control surfae (CCS) which describes which parts of the main surface are compressed and which are not. The location of CCS is provided by userspace as just another plane with its own offset.
Add the required stuff to validate the user provided AUX plane metadata and convert the user provided linear offset into something the hardware can consume.
Due to hardware limitations we require that the main surface and the AUX surface (CCS) be part of the same bo. The hardware also makes life hard by not allowing you to provide separate x/y offsets for the main and AUX surfaces (excpet with NV12), so finding suitable offsets for both requires a bit of work. Assuming we still want keep playing tricks with the offsets. I've just gone with a dumb "search backward for suitable offsets" approach, which is far from optimal, but it works.
Also not all planes will be capable of scanning out compressed surfaces, and eg. 90/270 degree rotation is not supported in combination with decompression either.
This patch may contain work from at least the following people:
* Vandana Kannan <[email protected]>
* Daniel Vetter <[email protected]>
* Ben Widawsky <[email protected]>
v2: Deal with display workarounds 0390, 0531, 1125 (Paulo)
v3: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)
Put the AUX register defines to the correct place Fix up the slightly bogus rotation check
--- drivers/gpu/drm/i915/i915_reg.h | 23 ++++ drivers/gpu/drm/i915/intel_display.c | 235 ++++++++++++++++++++++++++++++++--- drivers/gpu/drm/i915/intel_pm.c | 29 ++++- drivers/gpu/drm/i915/intel_sprite.c | 5 + 4 files changed, 273 insertions(+), 19 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +23 -0
@@ -5905,6 +5905,10 @@ enum {#define _PLANE_KEYMSK_2_A 0x70298#define _PLANE_KEYMAX_1_A 0x701a0#define _PLANE_KEYMAX_2_A 0x702a0 +#define _PLANE_AUX_DIST_1_A 0x701c0 +#define _PLANE_AUX_DIST_2_A 0x702c0 +#define _PLANE_AUX_OFFSET_1_A 0x701c4 +#define _PLANE_AUX_OFFSET_2_A 0x702c4#define _PLANE_COLOR_CTL_1_A 0x701CC/* GLK+ */ #define _PLANE_COLOR_CTL_2_A 0x702CC/* GLK+ */ #define _PLANE_COLOR_CTL_3_A 0x703CC/* GLK+ */
@@ -6011,6 +6015,24 @@ enum {#define PLANE_NV12_BUF_CFG (pipe, plane) \ _MMIO_PLANE(plane, _PLANE_NV12_BUF_CFG_1(pipe), _PLANE_NV12_BUF_CFG_2(pipe)) +#define _PLANE_AUX_DIST_1_B 0x711c0 +#define _PLANE_AUX_DIST_2_B 0x712c0 +#define _PLANE_AUX_DIST_1 (pipe) \ + _PIPE(pipe, _PLANE_AUX_DIST_1_A, _PLANE_AUX_DIST_1_B) +#define _PLANE_AUX_DIST_2 (pipe) \ + _PIPE(pipe, _PLANE_AUX_DIST_2_A, _PLANE_AUX_DIST_2_B) +#define PLANE_AUX_DIST (pipe, plane) \ + _MMIO_PLANE(plane, _PLANE_AUX_DIST_1(pipe), _PLANE_AUX_DIST_2(pipe)) + +#define _PLANE_AUX_OFFSET_1_B 0x711c4 +#define _PLANE_AUX_OFFSET_2_B 0x712c4 +#define _PLANE_AUX_OFFSET_1 (pipe) \ + _PIPE(pipe, _PLANE_AUX_OFFSET_1_A, _PLANE_AUX_OFFSET_1_B) +#define _PLANE_AUX_OFFSET_2 (pipe) \ + _PIPE(pipe, _PLANE_AUX_OFFSET_2_A, _PLANE_AUX_OFFSET_2_B) +#define PLANE_AUX_OFFSET (pipe, plane) \ + _MMIO_PLANE(plane, _PLANE_AUX_OFFSET_1(pipe), _PLANE_AUX_OFFSET_2(pipe)) +#define _PLANE_COLOR_CTL_1_B 0x711CC#define _PLANE_COLOR_CTL_2_B 0x712CC#define _PLANE_COLOR_CTL_3_B 0x713CC
@@ -6494,6 +6516,7 @@ enum {# define CHICKEN3_DGMG_DONE_FIX_DISABLE (1 << 2)#define CHICKEN_PAR1_1 _MMIO(0x42080) +#define SKL_RC_HASH_OUTSIDE (1 << 15)#define DPA_MASK_VBLANK_SRD (1 << 15)#define FORCE_ARB_IDLE_PLANES (1 << 14)#define SKL_EDP_PSR_FIX_RDWRAP (1 << 3)
drivers/gpu/drm/i915/intel_display.c +218 -17
378 lines not on this page · raw message
drivers/gpu/drm/i915/intel_pm.c +27 -2
@@ -62,6 +62,20 @@ static void gen9_init_clock_gating(struct drm_i915_private *dev_priv)I915_WRITE (CHICKEN_PAR1_1 ,I915_READ (CHICKEN_PAR1_1 ) |SKL_EDP_PSR_FIX_RDWRAP ); +/* +* Display WA#0390: skl,bxt,kbl,glk +* +* Must match Sampler, Pixel Back End, and Media +* (0xE194 bit 8, 0x7014 bit 13, 0x4DDC bits 27 and 31). +* +* Including bits outside the page in the hash would +* require 2 (or 4?) MiB alignment of resources. Just +* assume the defaul hashing mode which only uses bits +* within the page. +*/ +I915_WRITE (CHICKEN_PAR1_1 , +I915_READ (CHICKEN_PAR1_1 ) & ~SKL_RC_HASH_OUTSIDE ); +I915_WRITE (GEN8_CONFIG0 ,I915_READ (GEN8_CONFIG0 ) |GEN9_DEFAULT_FIXES );
@@ -3467,7 +3481,9 @@ skl_ddb_min_alloc(const struct drm_plane_state *pstate,/* For Non Y-tile return 8-blocks */ if (fb->modifier !=I915_FORMAT_MOD_Y_TILED && - fb->modifier != I915_FORMAT_MOD_Yf_TILED) + fb->modifier != I915_FORMAT_MOD_Yf_TILED && + fb->modifier !=I915_FORMAT_MOD_Y_TILED_CCS && + fb->modifier != I915_FORMAT_MOD_Yf_TILED_CCS)return 8 ; src_w =drm_rect_width (&intel_pstate->base.src) >>16 ;
@@ -3743,7 +3759,9 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv, } y_tiled = fb->modifier ==I915_FORMAT_MOD_Y_TILED || - fb->modifier == I915_FORMAT_MOD_Yf_TILED; + fb->modifier == I915_FORMAT_MOD_Yf_TILED || + fb->modifier ==I915_FORMAT_MOD_Y_TILED_CCS || + fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS; x_tiled = fb->modifier ==I915_FORMAT_MOD_X_TILED ;/* Display WA #1141: kbl. */
@@ -3828,6 +3846,13 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv, res_lines =DIV_ROUND_UP (selected_result.val, plane_blocks_per_line.val); +/* Display WA #1125: skl,bxt,kbl,glk */ +if (level ==0 && + (fb->modifier ==I915_FORMAT_MOD_Y_TILED_CCS || + fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS)) + res_blocks +=fixed_16_16_to_u32_round_up (y_tile_minimum); + +/* Display WA #1126: skl,bxt,kbl,glk */ if (level >=1 && level <=7 ) {if (y_tiled) { res_blocks +=fixed_16_16_to_u32_round_up (y_tile_minimum);
drivers/gpu/drm/i915/intel_sprite.c +5 -0
@@ -222,6 +222,7 @@ skl_update_plane(struct drm_plane *drm_plane,u32 surf_addr = plane_state->main.offset;unsigned int rotation = plane_state->base.rotation;u32 stride =skl_plane_stride (fb,0 , rotation); +u32 aux_stride =skl_plane_stride (fb,1 , rotation);int crtc_x = plane_state->base.dst.x1;int crtc_y = plane_state->base.dst.y1;uint32_t crtc_w =drm_rect_width (&plane_state->base.dst);
@@ -269,6 +270,10 @@ skl_update_plane(struct drm_plane *drm_plane,I915_WRITE (PLANE_OFFSET (pipe, plane_id), (y <<16 ) | x);I915_WRITE (PLANE_STRIDE (pipe, plane_id), stride);I915_WRITE (PLANE_SIZE (pipe, plane_id), (src_h <<16 ) | src_w); +I915_WRITE (PLANE_AUX_DIST (pipe, plane_id), + (plane_state->aux.offset - surf_addr) | aux_stride); +I915_WRITE (PLANE_AUX_OFFSET (pipe, plane_id), + (plane_state->aux.y <<16 ) | plane_state->aux.x);/* program plane scaler */ if (plane_state->scaler_id >=0 ) {
Signature · 6 lines
2.10.2 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: SKL+ render decompression support (rev3)
In reply to [email protected]== Series Details ==
== Series Details ==
Series: drm/i915: SKL+ render decompression support (rev3)
URL : https://patchwork.freedesktop.org/series/17507/
State : success
== Summary ==
Series 17507v3 drm/i915: SKL+ render decompression support
https://patchwork.freedesktop.org/api/1.0/series/17507/revisions/3/mbox/
Test gem_exec_flush:
Subgroup basic-batch-kernel-default-uc:
fail -> PASS (fi-snb-2600) fdo#100007
Subgroup basic-uc-pro-default:
incomplete -> PASS (fi-skl-6770hq)
Test gem_exec_suspend:
Subgroup basic-s3:
fail -> PASS (fi-kbl-7500u)
Subgroup basic-s4-devices:
fail -> DMESG-WARN (fi-kbl-7500u) fdo#100099
dmesg-warn -> PASS (fi-bxt-t5700)
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
fail -> PASS (fi-kbl-7500u)
Subgroup suspend-read-crc-pipe-b:
fail -> PASS (fi-kbl-7500u)
Subgroup suspend-read-crc-pipe-c:
fail -> PASS (fi-kbl-7500u) fdo#100044fdo#100007 https://bugs.freedesktop.org/show_bug.cgi?id=100007
fdo#100099 https://bugs.freedesktop.org/show_bug.cgi?id=100099
fdo#100044 https://bugs.freedesktop.org/show_bug.cgi?id=100044
fi-bdw-5557u total:278 pass:267 dwarn:0 dfail:0 fail:0 skip:11 time: 465s fi-bsw-n3050 total:278 pass:239 dwarn:0 dfail:0 fail:0 skip:39 time: 611s fi-bxt-j4205 total:278 pass:259 dwarn:0 dfail:0 fail:0 skip:19 time: 536s fi-bxt-t5700 total:278 pass:258 dwarn:0 dfail:0 fail:0 skip:20 time: 620s fi-byt-j1900 total:278 pass:251 dwarn:0 dfail:0 fail:0 skip:27 time: 505s fi-byt-n2820 total:278 pass:247 dwarn:0 dfail:0 fail:0 skip:31 time: 498s fi-hsw-4770 total:278 pass:262 dwarn:0 dfail:0 fail:0 skip:16 time: 442s fi-hsw-4770r total:278 pass:262 dwarn:0 dfail:0 fail:0 skip:16 time: 436s fi-ilk-650 total:278 pass:228 dwarn:0 dfail:0 fail:0 skip:50 time: 442s fi-ivb-3520m total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 time: 502s fi-ivb-3770 total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 time: 486s fi-kbl-7500u total:278 pass:259 dwarn:1 dfail:0 fail:0 skip:18 time: 475s fi-skl-6260u total:278 pass:268 dwarn:0 dfail:0 fail:0 skip:10 time: 510s fi-skl-6700hq total:278 pass:261 dwarn:0 dfail:0 fail:0 skip:17 time: 596s fi-skl-6700k total:278 pass:256 dwarn:4 dfail:0 fail:0 skip:18 time: 495s fi-skl-6770hq total:54 pass:52 dwarn:0 dfail:0 fail:0 skip:1 time: 0s fi-snb-2520m total:278 pass:250 dwarn:0 dfail:0 fail:0 skip:28 time: 556s fi-snb-2600 total:278 pass:249 dwarn:0 dfail:0 fail:0 skip:29 time: 424s
6f8585956c95605b9c797ffde8f65e408b8d1e33 drm-tip: 2017y-03m-08d-14h-47m-28s UTC integration manifest 741c2d5 drm/i915: Add render decompression support
dc22c3e drm/i915: Implement .get_format_info() hook for CCS
de1dc92 drm: Add mode_config .get_format_info() hook
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4103/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx