staging: comedi: amplc_pci224: Convert macro GAT_CONFIG to static inline function
PATCH v2 1/1 staging: comedi: amplc_pci224: Convert macro GAT_CONFIG to static inline function
Convert macro GAT_CONFIG to static inline function as static inline functions are preferred over macros. This change is possible since the arguments at all call sites have the same type.
This was done using Coccinelle:
@r@
expression e;
@@
- #define GAT_CONFIG(chan, src) e
+ static inline unsigned int pci224_gat_config(unsigned int chan,
+ unsigned int src)
+{
+ return ((chan & 3) << 3) | (src & 7);
+}
@r1@
expression dev,reg,chan,src;
@@
-GAT_CONFIG(chan, src)
+pci224_gat_config(chan, src)
Also, the comment describing the macro has been removed manually.
---
v2:
-Change the name of static inline function
-put some code from 2 line to 1 line
drivers/staging/comedi/drivers/amplc_pci224.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/staging/comedi/drivers/amplc_pci224.c +8 -4
@@ -216,8 +216,12 @@#define GAT_GND 1/* GND (i.e. disabled) */ #define GAT_EXT 2/* reserved (external gate input) */ #define GAT_NOUTNM2 3/* inverted output of channel-2 modulo total */ -/* Macro to construct gate input configuration register value. */ -#define GAT_CONFIG (chan, src) ((((chan) & 3) << 3) | ((src) & 7)) + +static inline unsigned int pci224_gat_config (unsigned int chan, +unsigned int src) +{ +return ((chan &3 ) <<3 ) | (src &7 ); +}/* * Summary of CLK_OUTNM1 and GAT_NOUTNM2 connections for PCI224 and PCI234:
@@ -817,10 +821,10 @@ static void pci224_ao_start_pacer(struct comedi_device *dev,* source. */ /* Make sure Z2-0 is gated on. */ -outb (GAT_CONFIG (0 ,GAT_VCC ), devpriv->iobase1 +PCI224_ZGAT_SCE ); +outb (pci224_gat_config (0 ,GAT_VCC ), devpriv->iobase1 +PCI224_ZGAT_SCE );/* Cascading with Z2-2. */ /* Make sure Z2-2 is gated on. */ -outb (GAT_CONFIG (2 ,GAT_VCC ), devpriv->iobase1 +PCI224_ZGAT_SCE ); +outb (pci224_gat_config (2 ,GAT_VCC ), devpriv->iobase1 +PCI224_ZGAT_SCE );/* Z2-2 needs 10 MHz clock. */ outb (CLK_CONFIG (2 ,CLK_10MHZ ), devpriv->iobase1 +PCI224_ZCLK_SCE );/* Z2-0 is clocked from Z2-2's output. */
Signature · 1 line
2.7.4
Quoted 11 lines · simran singhal
Convert macro
GAT_CONFIGto static inline function as static inline functions are preferred over macros. This change is possible since the arguments at all call sites have the same type.This was done using Coccinelle:
@r@
expression e;
@@
- #defineGAT_CONFIG(chan, src)e
+ static inline unsigned int pci224_gat_config(unsigned int chan,
drivers/staging/comedi/drivers/amplc_pci224.c line 224
Quoted 4 lines
drivers/staging/comedi/drivers/amplc_pci224.c +4
-0+ unsigned int src) +{ +return ((chan &3 ) <<3 ) | (src &7 ); +}
It doesn't really make sense to do this part with Coccinelle. It is quite a one-shot change.
You could say that the uses were updated with Coccinelle and give that rule.
julia
Quoted 61 lines
@r1@
expression dev,reg,chan,src;
@@(quoted diff) +1
-1-GAT_CONFIG(chan, src) +pci224_gat_config(chan, src)Also, the comment describing the macro has been removed manually.
Signed-off-by simran singhal <[email protected]>---
v2:
-Change the name of static inline function
-put some code from 2 line to 1 linedrivers/staging/comedi/drivers/amplc_pci224.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)drivers/staging/comedi/drivers/amplc_pci224.c +8
-5@@ -216,8 +216,12 @@#define GAT_GND 1/* GND (i.e. disabled) */ #define GAT_EXT 2/* reserved (external gate input) */ #define GAT_NOUTNM2 3/* inverted output of channel-2 modulo total */ -/* Macro to construct gate input configuration register value. */ -#define GAT_CONFIG (chan, src) ((((chan) & 3) << 3) | ((src) & 7)) + +static inline unsigned int pci224_gat_config (unsigned int chan, +unsigned int src) +{ +return ((chan &3 ) <<3 ) | (src &7 ); +}/* * Summary of CLK_OUTNM1 and GAT_NOUTNM2 connections for PCI224 and PCI234: @@ -817,10 +821,10 @@ static void pci224_ao_start_pacer(struct comedi_device *dev,* source. */ /* Make sure Z2-0 is gated on. */ -outb (GAT_CONFIG (0 ,GAT_VCC ), devpriv->iobase1 +PCI224_ZGAT_SCE ); +outb (pci224_gat_config (0 ,GAT_VCC ), devpriv->iobase1 +PCI224_ZGAT_SCE );/* Cascading with Z2-2. */ /* Make sure Z2-2 is gated on. */ -outb (GAT_CONFIG (2 ,GAT_VCC ), devpriv->iobase1 +PCI224_ZGAT_SCE ); +outb (pci224_gat_config (2 ,GAT_VCC ), devpriv->iobase1 +PCI224_ZGAT_SCE );/* Z2-2 needs 10 MHz clock. */ outb (CLK_CONFIG (2 ,CLK_10MHZ ), devpriv->iobase1 +PCI224_ZCLK_SCE );/* Z2-0 is clocked from Z2-2's output. */ --2.7.4
--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20170312153329.GA20729%40singhal-Inspiron-5558.
For more options, visit https://groups.google.com/d/optout.