Skip to contentSkip to conversation

ARM: dts: imx6sx: Make UART compatible to 'imx6q-uart'

PATCH New Fabio Estevam 2 participants 2 messages Mar 6, 2017 – Mar 14, 2017

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 ARM: dts: imx6sx: Make UART compatible to 'imx6q-uart'

From: Fabio Estevam <[email protected]>

UART on i.MX6SX (like all other i.MX6 SoC variants) has the same programming model as the 'imx6q-uart' type, so add it to the compatible UART string.

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/boot/dts/imx6sx.dtsi | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)
arch/arm/boot/dts/imx6sx.dtsi +12 -6
index dd4ec85..f58d7f5 100644
@@ -297,7 +297,8 @@
 				};
 
 				uart1: serial at 02020000 {
-					compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sx-uart",
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_UART_IPG>,

@@ -1053,7 +1054,8 @@
 			};
 
 			uart2: serial at 021e8000 {
-				compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021e8000 0x4000>;
 				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_UART_IPG>,

@@ -1065,7 +1067,8 @@
 			};
 
 			uart3: serial at 021ec000 {
-				compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021ec000 0x4000>;
 				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_UART_IPG>,

@@ -1077,7 +1080,8 @@
 			};
 
 			uart4: serial at 021f0000 {
-				compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f0000 0x4000>;
 				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_UART_IPG>,

@@ -1089,7 +1093,8 @@
 			};
 
 			uart5: serial at 021f4000 {
-				compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f4000 0x4000>;
 				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_UART_IPG>,

@@ -1229,7 +1234,8 @@
 			};
 
 			uart6: serial at 022a0000 {
-				compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x022a0000 0x4000>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_UART_IPG>,
Signature · 1 line
2.7.4
Applied
#1 lore raw

PATCH 1/1 ARM: dts: imx6sx: Make UART compatible to 'imx6q-uart'

Quoted 7 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

UART on i.MX6SX (like all other i.MX6 SoC variants) has the same programming model as the 'imx6q-uart' type, so add it to the compatible UART string.

Signed-off-by Fabio Estevam <[email protected]>

Applied, thanks.