Configure CPCAP PMIC ADC, charger and OTG for droid 4
cover Configure CPCAP PMIC ADC, charger and OTG for droid 4
Hi all,
These patches configure ADC, battery charger and USB OTG for droid 4.
To test, you'll need current Linux next and the following sets of patches:
- [PATCH v2] genirq: Add support for nested shared IRQs
- [PATCH 0/4] Regmap IRQ fix and related changes CPCAP
- [PATCH] iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC
- [PATCH] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
- [PATCH] phy: cpcap-usb: Add CPCAP PMIC USB support
Regards,
Tony
Tony Lindgren (3):
ARM: dts: omap4-droid4: Add CPCAP PMIC ADC configuration
ARM: dts: omap4-droid4: Add CPCAP PMIC battery charger configuration
ARM: dts: omap4-droid4: Add CPCAP PMIC OTG PHY configuration
arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 49 ++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)
Signature · 5 lines
2.11.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20170317041012.26800-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org
PATCH 1/3 ARM: dts: omap4-droid4: Add CPCAP PMIC ADC configuration
Add CPCAP PMIC ADC configuration.
--- arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +7 -0
@@ -19,6 +19,13 @@ spi-max-frequency = <3000000>; spi-cs-high; + cpcap_adc: adc { + compatible = "motorola,mapphone-cpcap-adc"; + interrupts-extended = <&cpcap 8 0>; + interrupt-names = "adcdone"; + #io-channel-cells = <1>; + }; + cpcap_regulator: regulator { compatible = "motorola,mapphone-cpcap-regulator";
Signature · 5 lines
2.11.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20170317041012.26800-2-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org
Re: [PATCH 1/3] ARM: dts: omap4-droid4: Add CPCAP PMIC ADC configuration
Hi,
Quoted 7 lines · Tony Lindgren
Add CPCAP PMIC ADC configuration.
Cc Marcel Partap <[email protected]>Cc Michael Scott <[email protected]>Cc Sebastian Reichel <[email protected]>Signed-off-by Tony Lindgren <[email protected]>
Quoted 23 lines
--- arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +7
-0@@ -19,6 +19,13 @@ spi-max-frequency = <3000000>; spi-cs-high; + cpcap_adc: adc { + compatible = "motorola,mapphone-cpcap-adc"; + interrupts-extended = <&cpcap 8 0>; + interrupt-names = "adcdone"; + #io-channel-cells = <1>; + }; + cpcap_regulator: regulator { compatible = "motorola,mapphone-cpcap-regulator";Signature · 1 line
2.11.1
PATCH 2/3 ARM: dts: omap4-droid4: Add CPCAP PMIC battery charger configuration
In reply to a message not in the archiveAdd CPCAP PMIC battery charger configuration.
--- arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +19 -0
@@ -26,6 +26,25 @@ #io-channel-cells = <1>; }; + cpcap_charger: charger { + compatible = "motorola,mapphone-cpcap-charger"; + interrupts-extended = < + &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0 + &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0 + >; + interrupt-names = + "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", + "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"; + mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW + &gpio3 23 GPIO_ACTIVE_LOW>; + io-channels = <&cpcap_adc 0 &cpcap_adc 1 + &cpcap_adc 2 &cpcap_adc 5 + &cpcap_adc 6>; + io-channel-names = "battdetb", "battp", + "vbus", "chg_isense", + "batti"; + }; + cpcap_regulator: regulator { compatible = "motorola,mapphone-cpcap-regulator";
Signature · 5 lines
2.11.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20170317041012.26800-3-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org
Re: [PATCH 2/3] ARM: dts: omap4-droid4: Add CPCAP PMIC battery charger configuration
Hi,
Quoted 7 lines · Tony Lindgren
Add CPCAP PMIC battery charger configuration.
Cc Marcel Partap <[email protected]>Cc Michael Scott <[email protected]>Cc Sebastian Reichel <[email protected]>Signed-off-by Tony Lindgren <[email protected]>
Quoted 35 lines
--- arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +19
-0@@ -26,6 +26,25 @@ #io-channel-cells = <1>; }; + cpcap_charger: charger { + compatible = "motorola,mapphone-cpcap-charger"; + interrupts-extended = < + &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0 + &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0 + >; + interrupt-names = + "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", + "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"; + mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW + &gpio3 23 GPIO_ACTIVE_LOW>; + io-channels = <&cpcap_adc 0 &cpcap_adc 1 + &cpcap_adc 2 &cpcap_adc 5 + &cpcap_adc 6>; + io-channel-names = "battdetb", "battp", + "vbus", "chg_isense", + "batti"; + }; + cpcap_regulator: regulator { compatible = "motorola,mapphone-cpcap-regulator";Signature · 1 line
2.11.1
PATCH 3/3 ARM: dts: omap4-droid4: Add CPCAP PMIC OTG PHY configuration
In reply to a message not in the archiveAdd CPCAP PMIC OTG PHY configuration.
--- arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +23 -0
@@ -65,6 +65,29 @@ interrupts = <23 IRQ_TYPE_NONE>; }; + cpcap_usb2_phy: phy { + compatible = "motorola,mapphone-cpcap-usb-phy"; + pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>; + pinctrl-1 = <&usb_ulpi_pins>; + pinctrl-2 = <&usb_utmi_pins>; + pinctrl-3 = <&uart3_pins>; + pinctrl-names = "default", "ulpi", "utmi", "uart"; + #phy-cells = <0>; + interrupts-extended = < + &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0 + &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0 + &cpcap 48 1 + >; + interrupt-names = + "id_ground", "id_float", "se0conn", "vbusvld", + "sessvld", "sessend", "se1", "dm", "dp"; + mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH + &gpio1 0 GPIO_ACTIVE_HIGH>; + io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>; + io-channel-names = "vbus", "id"; + vusb-supply = <&vusb>; + }; + led_red: led-red { compatible = "motorola,cpcap-led-red"; vdd-supply = <&sw5>;
Signature · 5 lines
2.11.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20170317041012.26800-4-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org
Re: [PATCH 3/3] ARM: dts: omap4-droid4: Add CPCAP PMIC OTG PHY configuration
Hi,
Quoted 7 lines · Tony Lindgren
Add CPCAP PMIC OTG PHY configuration.
Cc Marcel Partap <[email protected]>Cc Michael Scott <[email protected]>Cc Sebastian Reichel <[email protected]>Signed-off-by Tony Lindgren <[email protected]>
-- Sebastian
Quoted 39 lines
--- arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +23
-0@@ -65,6 +65,29 @@ interrupts = <23 IRQ_TYPE_NONE>; }; + cpcap_usb2_phy: phy { + compatible = "motorola,mapphone-cpcap-usb-phy"; + pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>; + pinctrl-1 = <&usb_ulpi_pins>; + pinctrl-2 = <&usb_utmi_pins>; + pinctrl-3 = <&uart3_pins>; + pinctrl-names = "default", "ulpi", "utmi", "uart"; + #phy-cells = <0>; + interrupts-extended = < + &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0 + &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0 + &cpcap 48 1 + >; + interrupt-names = + "id_ground", "id_float", "se0conn", "vbusvld", + "sessvld", "sessend", "se1", "dm", "dp"; + mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH + &gpio1 0 GPIO_ACTIVE_HIGH>; + io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>; + io-channel-names = "vbus", "id"; + vusb-supply = <&vusb>; + }; + led_red: led-red { compatible = "motorola,cpcap-led-red"; vdd-supply = <&sw5>;Signature · 1 line
2.11.1