ARM: dts: omap4-droid4: Configure EHCI so modems can be accessed
PATCH 1/1 ARM: dts: omap4-droid4: Configure EHCI so modems can be accessed
Droid 4 has two modems, mdm6600 and w3glte. Both are on the HCI USB controller.
Let's add a configuration for the HCI so the modems can be enabled.
Note that the modems still need GPIO based configuration that can be done with the test-d4-echi shell script I've posted to:
http://muru.com/linux/d4/test-d4-ehci
--- arch/arm/boot/dts/omap4-droid4-xt894.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
arch/arm/boot/dts/omap4-droid4-xt894.dts +14 -0
@@ -71,6 +71,11 @@ regulator-always-on; }; + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + }; + /* LCD regulator from sw5 source */ lcd_regulator: regulator-lcd { compatible = "regulator-fixed";
@@ -475,6 +480,15 @@ &omap4_pmx_core 0x17c>; }; +&usbhsehci { + phys = <&hsusb1_phy>; +}; + +&usbhshost { + port1-mode = "ohci-phy-4pin-dpdm"; + port2-mode = "ehci-tll"; +}; + /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ &usb_otg_hs { interface-type = <1>;
Signature · 5 lines
2.11.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20170315004033.28852-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org
Sebastian Reichel
Tested-byHi,
Quoted 8 lines · Tony Lindgren
Droid 4 has two modems, mdm6600 and w3glte. Both are on the HCI USB controller.
Let's add a configuration for the HCI so the modems can be enabled.
Note that the modems still need GPIO based configuration that can be done with the test-d4-echi shell script I've posted to:
Quoted 7 lines
http://muru.com/linux/d4/test-d4-ehci
Cc Marcel Partap <[email protected]>Cc Michael Scott <[email protected]>Cc Sebastian Reichel <[email protected]>Signed-off-by Tony Lindgren <[email protected]>
-- Sebastian
Quoted 41 lines
--- arch/arm/boot/dts/omap4-droid4-xt894.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+)arch/arm/boot/dts/omap4-droid4-xt894.dts +14
-0@@ -71,6 +71,11 @@ regulator-always-on; }; + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + }; + /* LCD regulator from sw5 source */ lcd_regulator: regulator-lcd { compatible = "regulator-fixed";@@ -475,6 +480,15 @@ &omap4_pmx_core 0x17c>; }; +&usbhsehci { + phys = <&hsusb1_phy>; +}; + +&usbhshost { + port1-mode = "ohci-phy-4pin-dpdm"; + port2-mode = "ehci-tll"; +}; + /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ &usb_otg_hs { interface-type = <1>;Signature · 5 lines
2.11.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html