dt-bindings: input: touchscreen: Add max11801-ts binding
Subsystems (3)
PATCH v6 5/8 dt-bindings: input: touchscreen: Add max11801-ts binding
From: Jagan Teki <[email protected]>
Add missing documentation of max11801-ts dt-binding details.
---
Changes for v6:
- Replace the lable and name of the node
ts: max11801 => max11801: touchscreen at 48
Changes for v5:
- Newly added patch
.../bindings/input/touchscreen/max11801-ts.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt new file +18 -0
@@ -0,0 +1,18 @@ +* MAXI MAX11801 Resistive touch screen controller with i2c interface + +Required properties: +- compatible: must be "max11801" +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: touch controller interrupt + +Example: + +&i2c1 { + max11801: touchscreen at 48 { + compatible = "max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 2>; + }; +};
Signature · 1 line
1.9.1
PATCH v6 6/8 ARM: dts: imx6q-icore: Add touchscreen node
From: Jagan Teki <[email protected]>
max11801 touchscreen on Engicam iCoreM6 Quad module is connected via i2c1, so add tc: max11801 at 48 on i2c1.
---
Changes for v6:
- Replace the lable and name of the node
ts: max11801 => max11801: touchscreen at 48
Changes for v5:
- %s/arm/ARM/g with subject prefix
Changes for v4:
- Newly added patch
arch/arm/boot/dts/imx6q-icore.dts | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/arm/boot/dts/imx6q-icore.dts +9 -0
@@ -58,6 +58,15 @@ status = "okay"; }; +&i2c1 { + max11801: touchscreen at 48 { + compatible = "max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 2>; + }; +}; + &ldb { status = "okay";
Signature · 1 line
1.9.1
Quoted 26 lines · Jagan Teki
From: Jagan Teki <[email protected]>
Add missing documentation of max11801-ts dt-binding details.
Cc Mark Rutland <[email protected]>Cc Rob Herring <[email protected]>Cc Shawn Guo <[email protected]>Cc Michael Trimarchi <[email protected]>Signed-off-by Jagan Teki <[email protected]>---
Changes for v6:
- Replace the lable and name of the node
ts: max11801 => max11801: touchscreen at 48
Changes for v5:
- Newly added patch.../bindings/input/touchscreen/max11801-ts.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txtDocumentation/devicetree/bindings/input/touchscreen/max11801-ts.txt new file +0
-0
Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt line 4
Quoted 4 lines
Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt new file +4
-0@@ -0,0 +1,18 @@ +* MAXI MAX11801 Resistive touch screen controller with i2c interface + +Required properties: +- compatible: must be "max11801"
Shouldn't it have a vendor prefix?
Also I will need Rob's ACK to get this go via IMX tree.
Shawn
Quoted 17 lines
Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt new file +14
-0+- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: touch controller interrupt + +Example: + +&i2c1 { + max11801: touchscreen at 48 { + compatible = "max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 2>; + }; +};Signature · 1 line
1.9.1
Quoted 21 lines · Shawn Guo
Quoted 20 lines · Jagan Teki
From: Jagan Teki <[email protected]>
Add missing documentation of max11801-ts dt-binding details.
Cc Mark Rutland <[email protected]>Cc Rob Herring <[email protected]>Cc Shawn Guo <[email protected]>Cc Michael Trimarchi <[email protected]>Signed-off-by Jagan Teki <[email protected]>---
Changes for v6:
- Replace the lable and name of the node
ts: max11801 => max11801: touchscreen at 48
Changes for v5:
- Newly added patch.../bindings/input/touchscreen/max11801-ts.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
Quoted 12 lines
Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt line 4
Quoted 10 lines
Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt new file +4
-0@@ -0,0 +1,18 @@ +* MAXI MAX11801 Resistive touch screen controller with i2c interface + +Required properties: +- compatible: must be "max11801"Shouldn't it have a vendor prefix?
Drivers i2c_device_id.name doesn't have vendor prefix, should I fix that one as well?
thanks!
Signature · 4 lines
Jagan Teki Senior Linux Kernel Engineer | Amarula Solutions U-Boot, Linux | Upstream Maintainer Hyderabad, India.
Quoted 10 lines · Jagan Teki
Quoted 7 lines
Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt line 4
Quoted 5 lines
Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt new file +4
-0@@ -0,0 +1,18 @@ +* MAXI MAX11801 Resistive touch screen controller with i2c interface + +Required properties: +- compatible: must be "max11801"Shouldn't it have a vendor prefix?
Drivers i2c_device_id.name doesn't have vendor prefix, should I fix that one as well?
No. The vendor prefix is only needed for device tree compatible.
Shawn