Skip to contentSkip to conversation

mfd: Add Cherry Trail Whiskey Cove PMIC driver

PATCH Superseded Hans de Goede 2 participants 2 messages Mar 26, 2017

Subsystems (2)

v5 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 mfd: Add Cherry Trail Whiskey Cove PMIC driver

Add mfd driver for Intel CHT Whiskey Cove PMIC, based on various non upstreamed CHT Whiskey Cove PMIC patches.

This is a somewhat minimal version which adds irqchip support and cells
for: ACPI PMIC opregion support, the i2c-controller driving the external charger irc and the pwrsrc/extcon block.

Further cells can be added in the future if/when drivers are upstreamed for them.

---
Changes in v2:
-Since this uses plain mfd and not the intel_soc_pmic stuff give it
its own Kconfig and allow this to be built as a module
-Add missing #include <acpi/acpi_bus.h>
Changes in v3:
-Drop #include <acpi/acpi_bus.h> again, not the right fix for the build errors
-Error out when the upper byte of the register-address passed to the regmap
functions is 0 rather then hardcoding an address in that case
-Various minor style tweaks / cleanups
-Move defines of regulator register addresses to intel_pmic_chtwc.c,
it is the only place where they are used
-Drop now empty include/linux/mfd/intel_chtwc.h
-Rename intel_soc_pmic_chtwc.c to intel_cht_wc.c to match Kconfig option name
-Add irqchip support
-Add external charger cell
-Add pwrsrc cell
Changes in v4:
-Use PLATFORM_DEVID_NONE
Changes in v5:
-Change Kconfig option from tristate to boolean and add a select for the
i2c-bus driver, this is necessary because the chtwc PMIC provides an ACPI
OPRegion handler, which must be available before other drivers using it
are loaded, which can only be ensured if the mfd, opregion and i2c-bus
drivers are built in. This fixes errors like these during boot:
mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
ACPI Error: No handler for Region [REGS] (ffff93543b0cc3a8) [UserDefinedRegion] (20170119/evregion-166) ACPI Error: Region UserDefinedRegion (ID=143) has no handler (20170119/exfldio-299)
ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C7.PMI5.GET] (Node ffff93543b0cde10), AE_NOT_EXIST (20170119/psparse-543) ACPI Error: Method parse/execution failed [\_SB.PCI0.SHC1._PS0] (Node ffff93543b0b5cd0), AE_NOT_EXIST (20170119/psparse-543) acpi 80860F14:02: Failed to change power state to D0
-Some minor style and capitalization fixes from review by Lee Jones

---
 drivers/mfd/Kconfig                |  13 ++
 drivers/mfd/Makefile               |   1 +
 drivers/mfd/intel_soc_pmic_chtwc.c | 239 +++++++++++++++++++++++++++++++++++++
 3 files changed, 253 insertions(+)
 create mode 100644 drivers/mfd/intel_soc_pmic_chtwc.c
drivers/mfd/Kconfig +13 -0
index 55ecdfb..da37fe4 100644
@@ -437,6 +437,19 @@ config INTEL_SOC_PMIC
 	  thermal, charger and related power management functions
 	  on these systems.
 
+config INTEL_SOC_PMIC_CHTWC
+	# This is a bool as it provides an ACPI Opregion which must be
+	# available as soon as possible
+	bool "Support for Intel Cherry Trail Whiskey Cove PMIC"
+	depends on ACPI && I2C
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	select I2C_DESIGNWARE_PLATFORM
+	help
+	  Select this option to enable support for the Intel Cherry Trail
+	  Whiskey Cove PMIC found on some Intel Cherry Trail systems.
+
 config MFD_INTEL_LPSS
 	tristate
 	select COMMON_CLK
drivers/mfd/Makefile +1 -0
index 31ce076..d2ca514 100644
@@ -209,6 +209,7 @@ obj-$(CONFIG_MFD_SKY81452)	+= sky81452.o
 intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
 intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC)	+= intel_soc_pmic_bxtwc.o
 obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
+obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o
 obj-$(CONFIG_MFD_MT6397)	+= mt6397-core.o
 
 obj-$(CONFIG_MFD_ALTERA_A10SR)	+= altera-a10sr.o
drivers/mfd/intel_soc_pmic_chtwc.c new file +239 -0

239 lines not on this page · raw message

Signature · 1 line
2.9.3
#1 lore raw
reproduce: wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # save the attached .config to linux build tree make.cross…

Hi Hans,

[auto build test WARNING on ljones-mfd/for-mfd-next]
[also build test WARNING on v4.11-rc4 next-20170324]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Hans-de-Goede/mfd-Add-Cherry-Trail-Whiskey-Cove-PMIC-driver/20170327-045223
base:   https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next
config: ia64-allmodconfig (attached as .config)
compiler: ia64-linux-gcc (GCC) 6.2.0

reproduce:
wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=ia64

All warnings (new ones prefixed by >>):

warning: (INTEL_SOC_PMIC_CHTWC) selects I2C_DESIGNWARE_PLATFORM which has unmet direct dependencies (I2C && HAS_IOMEM && (ACPI && COMMON_CLK || !ACPI))

---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation