Remove whitespaces
PATCH 1/1 Remove whitespaces
To search for them I used this regex:
[ ]{1,}\t
and manually removed them in most of the cases.
For xserver_xorg-server.mk I decided to remove the tabs instead.
Signed-off-by Bernd Kuhls <[email protected]>
--- arch/Config.in.arc | 2 +- arch/Config.in.arm | 16 ++--- arch/Config.in.mips | 2 +- linux/linux-ext-rtai.mk | 4 +- linux/linux.mk | 6 +- package/bluez5_utils/bluez5_utils.mk | 6 +- package/lesstif/lesstif.mk | 8 +-- package/linux-firmware/linux-firmware.mk | 2 +- package/netsnmp/netsnmp.mk | 2 +- package/pkg-generic.mk | 2 +- package/pkg-kernel-module.mk | 2 +- package/pkg-waf.mk | 6 +- package/python/python.mk | 6 +- package/python3/python3.mk | 6 +- package/rt-tests/rt-tests.mk | 6 +- package/rtai/rtai.mk | 4 +- package/udisks/udisks.mk | 2 +- package/usbmount/usbmount.mk | 4 +- .../xserver_xorg-server/xserver_xorg-server.mk | 82 +++++++++++----------- 19 files changed, 84 insertions(+), 84 deletions(-)
arch/Config.in.arc +1 -1
@@ -39,7 +39,7 @@ config BR2_GCC_TARGET_CPU default "archs" if BR2_archs38 config BR2_READELF_ARCH_NAME - default "ARCompact" if BR2_arc750d || BR2_arc770d + default "ARCompact" if BR2_arc750d || BR2_arc770d default "ARCv2" if BR2_archs38 choice
arch/Config.in.arm +8 -8
@@ -536,13 +536,13 @@ config BR2_GCC_TARGET_CPU default "iwmmxt" if BR2_iwmmxt default "cortex-a53" if (BR2_cortex_a53 && !BR2_ARCH_IS_64) default "cortex-a53+fp" if (BR2_cortex_a53 && BR2_ARCH_IS_64 && BR2_ARM_FPU_FP_ARMV8) - default "cortex-a53+fp+simd" if (BR2_cortex_a53 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8) + default "cortex-a53+fp+simd" if (BR2_cortex_a53 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8) default "cortex-a57" if (BR2_cortex_a57 && !BR2_ARCH_IS_64) default "cortex-a57+fp" if (BR2_cortex_a57 && BR2_ARCH_IS_64 && BR2_ARM_FPU_FP_ARMV8) - default "cortex-a57+fp+simd" if (BR2_cortex_a57 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8) + default "cortex-a57+fp+simd" if (BR2_cortex_a57 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8) default "cortex-a72" if (BR2_cortex_a72 && !BR2_ARCH_IS_64) default "cortex-a72+fp" if (BR2_cortex_a72 && BR2_ARCH_IS_64 && BR2_ARM_FPU_FP_ARMV8) - default "cortex-a72+fp+simd" if (BR2_cortex_a72 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8) + default "cortex-a72+fp+simd" if (BR2_cortex_a72 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8) config BR2_GCC_TARGET_ABI default "aapcs-linux" if BR2_arm || BR2_armeb
@@ -552,11 +552,11 @@ config BR2_GCC_TARGET_FPU depends on BR2_arm || BR2_armeb default "vfp" if BR2_ARM_FPU_VFPV2 default "vfpv3" if BR2_ARM_FPU_VFPV3 - default "vfpv3-d16" if BR2_ARM_FPU_VFPV3D16 - default "vfpv4" if BR2_ARM_FPU_VFPV4 - default "vfpv4-d16" if BR2_ARM_FPU_VFPV4D16 - default "neon" if BR2_ARM_FPU_NEON - default "neon-vfpv4" if BR2_ARM_FPU_NEON_VFPV4 + default "vfpv3-d16" if BR2_ARM_FPU_VFPV3D16 + default "vfpv4" if BR2_ARM_FPU_VFPV4 + default "vfpv4-d16" if BR2_ARM_FPU_VFPV4D16 + default "neon" if BR2_ARM_FPU_NEON + default "neon-vfpv4" if BR2_ARM_FPU_NEON_VFPV4 default "fp-armv8" if BR2_ARM_FPU_FP_ARMV8 default "neon-fp-armv8" if BR2_ARM_FPU_NEON_FP_ARMV8
arch/Config.in.mips +1 -1
@@ -134,7 +134,7 @@ config BR2_ARCH config BR2_ENDIAN default "LITTLE" if BR2_mipsel || BR2_mips64el - default "BIG" if BR2_mips || BR2_mips64 + default "BIG" if BR2_mips || BR2_mips64 config BR2_GCC_TARGET_ARCH default "mips32" if BR2_mips_32
linux/linux-ext-rtai.mk +2 -2
@@ -20,8 +20,8 @@ endif define RTAI_PREPARE_KERNEL kver=`$(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) --no-print-directory -s kernelversion` ; \ if test -f $(RTAI_DIR)/base/arch/$(RTAI_ARCH)/patches/hal-linux-$${kver}-*patch ; then \ - $(APPLY_PATCHES) $(LINUX_DIR) \ - $(RTAI_DIR)/base/arch/$(RTAI_ARCH)/patches/ \ + $(APPLY_PATCHES) $(LINUX_DIR) \ + $(RTAI_DIR)/base/arch/$(RTAI_ARCH)/patches/ \ hal-linux-$${kver}-*patch ; \ else \ echo "No RTAI patch for your kernel version" ; \
linux/linux.mk +3 -3
@@ -347,7 +347,7 @@ define LINUX_BUILD_CMDS $(if $(BR2_LINUX_KERNEL_USE_CUSTOM_DTS), cp -f $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_DTS_PATH)) $(KERNEL_ARCH_PATH)/boot/dts/) $(LINUX_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_TARGET_NAME) - @if grep -q "CONFIG_MODULES=y" $(@D)/.config; then \ + @if grep -q "CONFIG_MODULES=y" $(@D)/.config; then \ $(LINUX_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) modules ; \ fi $(LINUX_BUILD_DTB)
@@ -378,7 +378,7 @@ endif define LINUX_INSTALL_HOST_TOOLS # Installing dtc (device tree compiler) as host tool, if selected - if grep -q "CONFIG_DTC=y" $(@D)/.config; then \ + if grep -q "CONFIG_DTC=y" $(@D)/.config; then \ $(INSTALL) -D -m 0755 $(@D)/scripts/dtc/dtc $(HOST_DIR)/usr/bin/linux-dtc ; \ if [ ! -e $(HOST_DIR)/usr/bin/dtc ]; then \ ln -sf linux-dtc $(HOST_DIR)/usr/bin/dtc ; \
@@ -400,7 +400,7 @@ define LINUX_INSTALL_TARGET_CMDS $(LINUX_INSTALL_KERNEL_IMAGE_TO_TARGET) # Install modules and remove symbolic links pointing to build # directories, not relevant on the target - @if grep -q "CONFIG_MODULES=y" $(@D)/.config; then \ + @if grep -q "CONFIG_MODULES=y" $(@D)/.config; then \ $(LINUX_MAKE_ENV) $(MAKE1) $(LINUX_MAKE_FLAGS) -C $(@D) modules_install; \ rm -f $(TARGET_DIR)/lib/modules/$(LINUX_VERSION_PROBED)/build ; \ rm -f $(TARGET_DIR)/lib/modules/$(LINUX_VERSION_PROBED)/source ; \
package/bluez5_utils/bluez5_utils.mk +3 -3
@@ -12,9 +12,9 @@ BLUEZ5_UTILS_DEPENDENCIES = dbus libglib2 BLUEZ5_UTILS_LICENSE = GPLv2+, LGPLv2.1+ BLUEZ5_UTILS_LICENSE_FILES = COPYING COPYING.LIB -BLUEZ5_UTILS_CONF_OPTS = \ - --enable-tools \ - --enable-library \ +BLUEZ5_UTILS_CONF_OPTS = \ + --enable-tools \ + --enable-library \ --disable-cups ifeq ($(BR2_PACKAGE_BLUEZ5_UTILS_OBEX),y)
package/lesstif/lesstif.mk +4 -4
@@ -22,11 +22,11 @@ LESSTIF_CONF_OPTS = \ # Reduces the buggy makefile to the smallest possible (and working) thing define LESSTIF_NOMAN2HTML - echo "all:" > $(@D)/doc/Makefile - echo "" >> $(@D)/doc/Makefile + echo "all:" > $(@D)/doc/Makefile + echo "" >> $(@D)/doc/Makefile echo "install:" >> $(@D)/doc/Makefile - echo "" >> $(@D)/doc/Makefile - echo "clean:" >> $(@D)/doc/Makefile + echo "" >> $(@D)/doc/Makefile + echo "clean:" >> $(@D)/doc/Makefile endef # Prevents to copy ac_find_motif.m4 on target, it would else
package/linux-firmware/linux-firmware.mk +1 -1
@@ -53,7 +53,7 @@ endif # rtl81xx ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX),y) LINUX_FIRMWARE_FILES += \ - rtlwifi/rtl8192cfw.bin rtlwifi/rtl8192cfwU.bin \ + rtlwifi/rtl8192cfw.bin rtlwifi/rtl8192cfwU.bin \ rtlwifi/rtl8192cfwU_B.bin rtlwifi/rtl8192cufw.bin \ rtlwifi/rtl8192defw.bin rtlwifi/rtl8192sefw.bin \ rtlwifi/rtl8188efw.bin rtlwifi/rtl8188eufw.bin \
package/netsnmp/netsnmp.mk +1 -1
@@ -117,7 +117,7 @@ endef endif define NETSNMP_STAGING_NETSNMP_CONFIG_FIXUP - $(SED) "s,^includedir=.*,includedir=\'$(STAGING_DIR)/usr/include\',g" \ + $(SED) "s,^includedir=.*,includedir=\'$(STAGING_DIR)/usr/include\',g" \ -e "s,^libdir=.*,libdir=\'$(STAGING_DIR)/usr/lib\',g" \ $(STAGING_DIR)/usr/bin/net-snmp-config endef
package/pkg-generic.mk +1 -1
@@ -642,7 +642,7 @@ else $(1)-install-images: endif -$(1)-install-host: $$($(2)_TARGET_INSTALL_HOST) +$(1)-install-host: $$($(2)_TARGET_INSTALL_HOST) $$($(2)_TARGET_INSTALL_HOST): $$($(2)_TARGET_BUILD) $(1)-build: $$($(2)_TARGET_BUILD)
package/pkg-kernel-module.mk +1 -1
@@ -25,7 +25,7 @@ # # $(eval $(kernel-module)) # define FOO_MOD_TWEAK -# # do something +# # do something # endef # FOO_POST_BUILD_HOOKS += FOO_MOD_TWEAK # $(eval $(generic-package))
package/pkg-waf.mk +3 -3
@@ -49,9 +49,9 @@ else $(2)_WAF = ./waf endif -$(2)_BUILD_OPTS ?= -$(2)_INSTALL_STAGING_OPTS ?= -$(2)_INSTALL_TARGET_OPTS ?= +$(2)_BUILD_OPTS ?= +$(2)_INSTALL_STAGING_OPTS ?= +$(2)_INSTALL_TARGET_OPTS ?= $(2)_WAF_OPTS ?= #
package/python/python.mk +3 -3
@@ -17,9 +17,9 @@ PYTHON_LIBTOOL_PATCH = NO # also installed in $(HOST_DIR), as it is needed when cross-compiling # third-party Python modules. -HOST_PYTHON_CONF_OPTS += \ +HOST_PYTHON_CONF_OPTS += \ --enable-static \ - --without-cxx-main \ + --without-cxx-main \ --disable-sqlite3 \ --disable-tk \ --with-expat=system \
@@ -159,7 +159,7 @@ PYTHON_CONF_ENV += ac_cv_big_endian_double=yes endif PYTHON_CONF_OPTS += \ - --without-cxx-main \ + --without-cxx-main \ --without-doc-strings \ --with-system-ffi \ --disable-pydoc \
package/python3/python3.mk +3 -3
@@ -24,9 +24,9 @@ PYTHON3_LIBTOOL_PATCH = NO # installed in $(HOST_DIR), as it is needed when cross-compiling # third-party Python modules. -HOST_PYTHON3_CONF_OPTS += \ +HOST_PYTHON3_CONF_OPTS += \ --without-ensurepip \ - --without-cxx-main \ + --without-cxx-main \ --disable-sqlite3 \ --disable-tk \ --with-expat=system \
@@ -152,7 +152,7 @@ endif PYTHON3_CONF_OPTS += \ --without-ensurepip \ - --without-cxx-main \ + --without-cxx-main \ --with-system-ffi \ --disable-pydoc \ --disable-test-modules \
package/rt-tests/rt-tests.mk +3 -3
@@ -16,15 +16,15 @@ endif define RT_TESTS_BUILD_CMDS $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ - CC="$(TARGET_CC)" \ + CC="$(TARGET_CC)" \ CFLAGS="$(TARGET_CFLAGS)" \ prefix=/usr endef define RT_TESTS_INSTALL_TARGET_CMDS $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ - DESTDIR="$(TARGET_DIR)" \ - prefix=/usr \ + DESTDIR="$(TARGET_DIR)" \ + prefix=/usr \ $(if $(BR2_PACKAGE_PYTHON),PYLIB=/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages/,PYLIB="") \ install endef
package/rtai/rtai.mk +2 -2
@@ -20,8 +20,8 @@ RTAI_DEPENDENCIES = linux RTAI_CONF_OPTS = \ --includedir=/usr/include/rtai \ - --with-linux-dir=$(LINUX_DIR) \ - --disable-leds \ + --with-linux-dir=$(LINUX_DIR) \ + --disable-leds \ --enable-usi \ --enable-align-priority \ --disable-rtailab \
package/udisks/udisks.mk +1 -1
@@ -11,7 +11,7 @@ UDISKS_LICENSE_FILES = COPYING # For 0002-Fix-systemd-service-file.patch UDISKS_AUTORECONF = YES -UDISKS_DEPENDENCIES = \ +UDISKS_DEPENDENCIES = \ sg3_utils \ host-pkgconf \ udev \
package/usbmount/usbmount.mk +2 -2
@@ -14,9 +14,9 @@ USBMOUNT_LICENSE_FILES = debian/copyright define USBMOUNT_INSTALL_TARGET_CMDS $(INSTALL) -m 0755 -D $(@D)/usbmount $(TARGET_DIR)/usr/share/usbmount/usbmount - $(INSTALL) -m 0755 -D $(@D)/00_create_model_symlink \ + $(INSTALL) -m 0755 -D $(@D)/00_create_model_symlink \ $(TARGET_DIR)/etc/usbmount/mount.d/00_create_model_symlink - $(INSTALL) -m 0755 -D $(@D)/00_remove_model_symlink \ + $(INSTALL) -m 0755 -D $(@D)/00_remove_model_symlink \ $(TARGET_DIR)/etc/usbmount/umount.d/00_remove_model_symlink $(INSTALL) -m 0644 -D $(@D)/usbmount.rules $(TARGET_DIR)/lib/udev/rules.d/usbmount.rules
package/x11r7/xserver_xorg-server/xserver_xorg-server.mk +41 -41
88 lines not on this page · raw message
Signature · 1 line
2.11.0
Thomas Petazzoni
AppliedPATCH 1/1 Remove whitespaces
Hello,
Quoted 22 lines · Bernd Kuhls
To search for them I used this regex:
[ ]{1,}\t
and manually removed them in most of the cases.
For xserver_xorg-server.mk I decided to remove the tabs instead.
Signed-off-by Bernd Kuhls <[email protected]>--- arch/Config.in.arc | 2 +- arch/Config.in.arm | 16 ++--- arch/Config.in.mips | 2 +- linux/linux-ext-rtai.mk | 4 +- linux/linux.mk | 6 +- package/bluez5_utils/bluez5_utils.mk | 6 +- package/lesstif/lesstif.mk | 8 +-- package/linux-firmware/linux-firmware.mk | 2 +- package/netsnmp/netsnmp.mk | 2 +- package/pkg-generic.mk | 2 +- package/pkg-kernel-module.mk | 2 +- package/pkg-waf.mk | 6 +-
Quoted 8 lines
package/python/python.mk | 6 +- package/python3/python3.mk | 6 +- package/rt-tests/rt-tests.mk | 6 +- package/rtai/rtai.mk | 4 +- package/udisks/udisks.mk | 2 +- package/usbmount/usbmount.mk | 4 +- .../xserver_xorg-server/xserver_xorg-server.mk | 82 +++++++++++----------- 19 files changed, 84 insertions(+), 84 deletions(-)
Applied to master, thanks. However, next time, please avoid using the first person ("I") in your commit log. Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com