config: am335x_evm: detect Black Wireless using BWA
PATCH 1/3 config: am335x_evm: detect Black Wireless using BWA
BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with the Ethernet replaced by a TI wl1835 wireless module.
This board can be indentified by the BWAx value after A335BNLT (BBB) in the at24 eeprom:
BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|]
http://beagleboard.org/black-wireless
https://github.com/beagleboard/beaglebone-black-wireless
firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware
wl18xx mac address: /proc/device-tree/ocp/ethernet at 4a100000/slave at 4a100200/mac-address
--- board/ti/am335x/board.c | 7 +++++++ include/configs/am335x_evm.h | 2 ++ 2 files changed, 9 insertions(+)
board/ti/am335x/board.c +7 -0
@@ -651,6 +651,13 @@ int board_late_init(void)#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG char *name =NULL ; +if (board_is_bone_lt ()) { +/* BeagleBoard.org BeagleBone Black Wireless: */ +if (!strncmp (board_ti_get_rev (),"BWA" ,3 )) { + name ="BBBW" ; + } + } +if (board_is_bbg1 ()) name ="BBG1" ;set_board_info_env (name);
include/configs/am335x_evm.h +2 -0
@@ -138,6 +138,8 @@"setenv fdtfile am335x-bone.dtb; fi; " \"if test $board_name = A335BNLT; then " \"setenv fdtfile am335x-boneblack.dtb; fi; " \ +"if test $board_name = BBBW; then " \ +"setenv fdtfile am335x-boneblack-wireless.dtb; fi; " \"if test $board_name = BBG1; then " \"setenv fdtfile am335x-bonegreen.dtb; fi; " \"if test $board_name = A33515BB; then " \
Signature · 1 line
2.11.0
PATCH 1/3 config: am335x_evm: detect Black Wireless using BWA
fyi: these are board only, SPL/device tree will need a bigger resync on am33xx from kernel.rog
Regards,
Quoted 56 lines · Robert Nelson
BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with the Ethernet replaced by a TI wl1835 wireless module.
This board can be indentified by the BWAx value after A335BNLT (BBB) in the at24 eeprom:
BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|]http://beagleboard.org/black-wireless
https://github.com/beagleboard/beaglebone-black-wirelessfirmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware
wl18xx mac address:/proc/device-tree/ocp/ethernetat 4a100000/slave at 4a100200/mac-addressSigned-off-by Robert Nelson <[email protected]>CC Tom Rini <[email protected]>CC Jason Kridner <[email protected]>CC Will Newton <[email protected]>--- board/ti/am335x/board.c | 7 +++++++ include/configs/am335x_evm.h | 2 ++ 2 files changed, 9 insertions(+)board/ti/am335x/board.c +7
-0@@ -651,6 +651,13 @@ int board_late_init(void)#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG char *name =NULL ; +if (board_is_bone_lt ()) { +/* BeagleBoard.org BeagleBone Black Wireless: */ +if (!strncmp (board_ti_get_rev (),"BWA" ,3 )) { + name ="BBBW" ; + } + } +if (board_is_bbg1 ()) name ="BBG1" ;set_board_info_env (name);include/configs/am335x_evm.h +2
-1@@ -138,6 +138,8 @@"setenv fdtfile am335x-bone.dtb; fi; " \"if test $board_name = A335BNLT; then " \"setenv fdtfile am335x-boneblack.dtb; fi; " \ +"if test $board_name = BBBW; then " \ +"setenv fdtfile am335x-boneblack-wireless.dtb; fi; " \"if test $board_name = BBG1; then " \"setenv fdtfile am335x-bonegreen.dtb; fi; " \"if test $board_name = A33515BB; then " \ --2.11.0
Signature · 2 lines
Robert Nelson https://rcn-ee.com/
PATCH 2/3 config: am335x_evm: detect Green Wireless using GW1
In reply to Robert NelsonSeeedStudio BeagleBone Green Wireless (BBGW) is an expansion of the SeeedStudio Green (BBG) with the Ethernet replaced by a TI wl1835 wireless module.
This board can be indentified by the GW1x value after A335BNLT (BBB) in the at24 eeprom:
GW1x [aa 55 33 ee 41 33 33 35 42 4e 4c 54 47 57 31 41 |.U3.A335BNLTGW1A|]
http://beagleboard.org/green-wireless
http://wiki.seeed.cc/BeagleBone_Green_Wireless/
firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware
wl18xx mac address: Stored in at24 eeprom at address 5-16:
hexdump -e '8/1 "%c"' /sys/bus/i2c/devices/0-0050/eeprom | cut -b 5-16
--- board/ti/am335x/board.c | 4 ++++ include/configs/am335x_evm.h | 2 ++ 2 files changed, 6 insertions(+)
board/ti/am335x/board.c +4 -0
@@ -656,6 +656,10 @@ int board_late_init(void)if (!strncmp (board_ti_get_rev (),"BWA" ,3 )) { name ="BBBW" ; } +/* SeeedStudio BeagleBone Green Wireless */ +if (!strncmp (board_ti_get_rev (),"GW1" ,3 )) { + name ="BBGW" ; + } }if (board_is_bbg1 ())
include/configs/am335x_evm.h +2 -0
@@ -142,6 +142,8 @@"setenv fdtfile am335x-boneblack-wireless.dtb; fi; " \"if test $board_name = BBG1; then " \"setenv fdtfile am335x-bonegreen.dtb; fi; " \ +"if test $board_name = BBGW; then " \ +"setenv fdtfile am335x-bonegreen-wireless.dtb; fi; " \"if test $board_name = A33515BB; then " \"setenv fdtfile am335x-evm.dtb; fi; " \"if test $board_name = A335X_SK; then " \
Signature · 1 line
2.11.0
PATCH 2/3 config: am335x_evm: detect Green Wireless using GW1
Quoted 11 lines · Robert Nelson
SeeedStudio BeagleBone Green Wireless (BBGW) is an expansion of the SeeedStudio Green (BBG) with the Ethernet replaced by a TI wl1835 wireless module.
This board can be indentified by the GW1x value after A335BNLT (BBB) in the at24 eeprom:
GW1x [aa 55 33 ee 41 33 33 35 42 4e 4c 54 47 57 31 41 |.U3.A335BNLTGW1A|]http://beagleboard.org/green-wireless
http://wiki.seeed.cc/BeagleBone_Green_Wireless/
Quoted 8 lines
firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware
wl18xx mac address: Stored in at24 eeprom at address 5-16:
hexdump -e '8/1 "%c"'/sys/bus/i2c/devices/0-0050/eeprom| cut -b 5-16Signed-off-by Robert Nelson <[email protected]>CC Tom Rini <[email protected]>CC Jason Kridner <[email protected]>CC Will Newton <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170404/a484cb6d/attachment.sig>
PATCH 2/3 config: am335x_evm: detect Green Wireless using GW1
In reply to Robert NelsonQuoted 15 lines · robertcnelson at gmail.com
SeeedStudio BeagleBone Green Wireless (BBGW) is an expansion of the SeeedStudio Green (BBG) with the Ethernet replaced by a TI wl1835 wireless module.
This board can be indentified by the GW1x value after A335BNLT (BBB) in the at24 eeprom:
GW1x [aa 55 33 ee 41 33 33 35 42 4e 4c 54 47 57 31 41 |.U3.A335BNLTGW1A|]http://beagleboard.org/green-wireless
http://wiki.seeed.cc/BeagleBone_Green_Wireless/firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware
wl18xx mac address: Stored in at24 eeprom at address 5-16:
hexdump -e '8/1 "%c"'/sys/bus/i2c/devices/0-0050/eeprom| cut -b 5-16
Quoted 5 lines
Signed-off-by Robert Nelson <[email protected]>CC Tom Rini <[email protected]>CC Jason Kridner <[email protected]>CC Will Newton <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170408/7acf705f/attachment.sig>
PATCH 3/3 config: am335x_evm: detect BeagleBone Blue using BLA
In reply to Robert NelsonBeagleBone Blue is next grenation of boards from BeagleBoard.org, focusing on robotics with a TI wl1835 wireless module for connectivity.
This board can be indentified by the BLAx value after A335BNLT (BBB) in the at24 eeprom:
BLAx: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 4c 41 30 |.U3.A335BNLTBLA2|]
http://beagleboard.org/blue
https://github.com/beagleboard/beaglebone-blue
firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware
wl18xx mac address: /proc/device-tree/ocp/ethernet at 4a100000/slave at 4a100200/mac-address
--- board/ti/am335x/board.c | 4 ++++ include/configs/am335x_evm.h | 2 ++ 2 files changed, 6 insertions(+)
board/ti/am335x/board.c +4 -0
@@ -660,6 +660,10 @@ int board_late_init(void)if (!strncmp (board_ti_get_rev (),"GW1" ,3 )) { name ="BBGW" ; } +/* BeagleBoard.org BeagleBone Blue */ +if (!strncmp (board_ti_get_rev (),"BLA" ,3 )) { + name ="BBBL" ; + } }if (board_is_bbg1 ())
include/configs/am335x_evm.h +2 -0
@@ -144,6 +144,8 @@"setenv fdtfile am335x-bonegreen.dtb; fi; " \"if test $board_name = BBGW; then " \"setenv fdtfile am335x-bonegreen-wireless.dtb; fi; " \ +"if test $board_name = BBBL; then " \ +"setenv fdtfile am335x-boneblue.dtb; fi; " \"if test $board_name = A33515BB; then " \"setenv fdtfile am335x-evm.dtb; fi; " \"if test $board_name = A335X_SK; then " \
Signature · 1 line
2.11.0
PATCH 3/3 config: am335x_evm: detect BeagleBone Blue using BLA
Quoted 10 lines · Robert Nelson
BeagleBone Blue is next grenation of boards from BeagleBoard.org, focusing on robotics with a TI wl1835 wireless module for connectivity.
This board can be indentified by the BLAx value after A335BNLT (BBB) in the at24 eeprom:
BLAx: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 4c 41 30 |.U3.A335BNLTBLA2|]http://beagleboard.org/blue
https://github.com/beagleboard/beaglebone-blue
Quoted 7 lines
firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware
wl18xx mac address:/proc/device-tree/ocp/ethernetat 4a100000/slave at 4a100200/mac-addressSigned-off-by Robert Nelson <[email protected]>CC Tom Rini <[email protected]>CC Jason Kridner <[email protected]>CC Will Newton <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170404/57dc8699/attachment.sig>
PATCH 3/3 config: am335x_evm: detect BeagleBone Blue using BLA
In reply to Robert NelsonQuoted 10 lines · robertcnelson at gmail.com
BeagleBone Blue is next grenation of boards from BeagleBoard.org, focusing on robotics with a TI wl1835 wireless module for connectivity.
This board can be indentified by the BLAx value after A335BNLT (BBB) in the at24 eeprom:
BLAx: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 4c 41 30 |.U3.A335BNLTBLA2|]http://beagleboard.org/blue
https://github.com/beagleboard/beaglebone-blue
Quoted 8 lines
firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware
wl18xx mac address:/proc/device-tree/ocp/ethernetat 4a100000/slave at 4a100200/mac-addressSigned-off-by Robert Nelson <[email protected]>CC Tom Rini <[email protected]>CC Jason Kridner <[email protected]>CC Will Newton <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170408/03f52a4a/attachment.sig>
PATCH 1/3 config: am335x_evm: detect Black Wireless using BWA
In reply to Robert NelsonQuoted 10 lines · Robert Nelson
BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with the Ethernet replaced by a TI wl1835 wireless module.
This board can be indentified by the BWAx value after A335BNLT (BBB) in the at24 eeprom:
BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|]http://beagleboard.org/black-wireless
https://github.com/beagleboard/beaglebone-black-wireless
Quoted 7 lines
firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware
wl18xx mac address:/proc/device-tree/ocp/ethernetat 4a100000/slave at 4a100200/mac-addressSigned-off-by Robert Nelson <[email protected]>CC Tom Rini <[email protected]>CC Jason Kridner <[email protected]>CC Will Newton <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170404/0ac08c2e/attachment.sig>
PATCH 1/3 config: am335x_evm: detect Black Wireless using BWA
In reply to Robert NelsonQuoted 13 lines · Robert Nelson
BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with the Ethernet replaced by a TI wl1835 wireless module.
This board can be indentified by the BWAx value after A335BNLT (BBB) in the at24 eeprom:
BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|]http://beagleboard.org/black-wireless
https://github.com/beagleboard/beaglebone-black-wirelessfirmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware
wl18xx mac address:/proc/device-tree/ocp/ethernetat 4a100000/slave at 4a100200/mac-address
Quoted 7 lines
Signed-off-by Robert Nelson <[email protected]>CC Tom Rini <[email protected]>CC Jason Kridner <[email protected]>CC Will Newton <[email protected]>--- board/ti/am335x/board.c | 7 +++++++ include/configs/am335x_evm.h | 2 ++
Shouldn't this also update "CONFIG_OF_LIST="am335x-evm am335x-bone am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2"" in configs/am335x_evm_defconfig ans possibly other am33xx_ configs?
Peter
Quoted 38 lines
board/ti/am335x/board.c +7
-0@@ -651,6 +651,13 @@ int board_late_init(void)#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG char *name =NULL ; +if (board_is_bone_lt ()) { +/* BeagleBoard.org BeagleBone Black Wireless: */ +if (!strncmp (board_ti_get_rev (),"BWA" ,3 )) { + name ="BBBW" ; + } + } +if (board_is_bbg1 ()) name ="BBG1" ;set_board_info_env (name);include/configs/am335x_evm.h +2
-1@@ -138,6 +138,8 @@"setenv fdtfile am335x-bone.dtb; fi; " \"if test $board_name = A335BNLT; then " \"setenv fdtfile am335x-boneblack.dtb; fi; " \ +"if test $board_name = BBBW; then " \ +"setenv fdtfile am335x-boneblack-wireless.dtb; fi; " \"if test $board_name = BBG1; then " \"setenv fdtfile am335x-bonegreen.dtb; fi; " \"if test $board_name = A33515BB; then " \ --2.11.0
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
PATCH 1/3 config: am335x_evm: detect Black Wireless using BWA
Quoted 22 lines · Peter Robinson
Quoted 13 lines · Robert Nelson
BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with the Ethernet replaced by a TI wl1835 wireless module.
This board can be indentified by the BWAx value after A335BNLT (BBB) in the at24 eeprom:
BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|]http://beagleboard.org/black-wireless
https://github.com/beagleboard/beaglebone-black-wirelessfirmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware
wl18xx mac address:/proc/device-tree/ocp/ethernetat 4a100000/slave at 4a100200/mac-addressQuoted 7 lines
Signed-off-by Robert Nelson <[email protected]>CC Tom Rini <[email protected]>CC Jason Kridner <[email protected]>CC Will Newton <[email protected]>--- board/ti/am335x/board.c | 7 +++++++ include/configs/am335x_evm.h | 2 ++
Quoted 3 lines
Shouldn't this also update "
CONFIG_OF_LIST="am335x-evmam335x-bone am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2"" in configs/am335x_evm_defconfig ans possibly otheram33xx_configs?
Hi Peter,
Currently these patches rely on "CONFIG_OF_CONTROL" being disabled (non-device-tree boot, aka the old boot method), after we resync with kernel.org's ti/omap device tree changes. We can go back and enable device-tree boot for these new devices.
Regards,
Signature · 2 lines
Robert Nelson https://rcn-ee.com/
PATCH 1/3 config: am335x_evm: detect Black Wireless using BWA
Quoted 27 lines · Robert Nelson
Quoted 22 lines · Peter Robinson
Quoted 13 lines · Robert Nelson
BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with the Ethernet replaced by a TI wl1835 wireless module.
This board can be indentified by the BWAx value after A335BNLT (BBB) in the at24 eeprom:
BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|]http://beagleboard.org/black-wireless
https://github.com/beagleboard/beaglebone-black-wirelessfirmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware
wl18xx mac address:/proc/device-tree/ocp/ethernetat 4a100000/slave at 4a100200/mac-addressQuoted 7 lines
Signed-off-by Robert Nelson <[email protected]>CC Tom Rini <[email protected]>CC Jason Kridner <[email protected]>CC Will Newton <[email protected]>--- board/ti/am335x/board.c | 7 +++++++ include/configs/am335x_evm.h | 2 ++Quoted 3 lines
Shouldn't this also update "
CONFIG_OF_LIST="am335x-evmam335x-bone am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2"" in configs/am335x_evm_defconfig ans possibly otheram33xx_configs?
Quoted 6 lines
Hi Peter,
Currently these patches rely on "
CONFIG_OF_CONTROL" being disabled (non-device-tree boot, aka the old boot method), after we resync with kernel.org's ti/omap device tree changes. We can go back and enable device-tree boot for these new devices.
and side note, with CONFIG_OF_CONTROL enabled with these patches, they'll still just use "am335x-boneblack.dtb" in spl/device-tree boot mode.. Since they share the black's eeprom base identifier.
Regards,
Signature · 2 lines
Robert Nelson https://rcn-ee.com/
PATCH 1/3 config: am335x_evm: detect Black Wireless using BWA
In reply to Robert NelsonQuoted 10 lines · robertcnelson at gmail.com
BeagleBone Black Wireless is clone of the BeagleBone Black (BBB) with the Ethernet replaced by a TI wl1835 wireless module.
This board can be indentified by the BWAx value after A335BNLT (BBB) in the at24 eeprom:
BWAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 57 41 35 |.U3.A335BNLTBWA5|]http://beagleboard.org/black-wireless
https://github.com/beagleboard/beaglebone-black-wireless
Quoted 8 lines
firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware
wl18xx mac address:/proc/device-tree/ocp/ethernetat 4a100000/slave at 4a100200/mac-addressSigned-off-by Robert Nelson <[email protected]>CC Tom Rini <[email protected]>CC Jason Kridner <[email protected]>CC Will Newton <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170408/91f4eb91/attachment.sig>