i915 gpu hangs under load
Subsystems (2)
Hi
I know something similar is here: https://bugs.freedesktop.org/show_bug.cgi?id=100110 too.
But this is rc3 and my machine is totally *not usable*. Let me be annoying :) I hope I can help:
Since rc1 I get gpu hangs and resets under load: This is almost certainly a kernel issue. 4.10 is fine. I keep a debian stable userspace. nouveau is running on this machine too.
Mar 22 09:17:01 martin-laptop kernel: [ 2409.538706] [drm] GPU HANG: ecode 7:0:0xf3cffffe, in gnome-shell [1869], reason: Hang on render ring, action: reset Mar 22 09:17:01 martin-laptop kernel: [ 2409.538711] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. Mar 22 09:17:01 martin-laptop kernel: [ 2409.538713] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel Mar 22 09:17:01 martin-laptop kernel: [ 2409.538714] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. Mar 22 09:17:01 martin-laptop kernel: [ 2409.538715] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. Mar 22 09:17:01 martin-laptop kernel: [ 2409.538716] [drm] GPU crash dump saved to /sys/class/drm/card0/error Mar 22 09:17:01 martin-laptop kernel: [ 2409.538768] drm/i915: Resetting chip after gpu hang Mar 22 09:17:09 martin-laptop kernel: [ 2417.537886] drm/i915: Resetting chip after gpu hang Mar 22 09:17:17 martin-laptop kernel: [ 2425.537152] drm/i915: Resetting chip after gpu hang Mar 22 09:17:25 martin-laptop kernel: [ 2433.536407] drm/i915: Resetting chip after gpu hang Mar 22 09:17:33 martin-laptop kernel: [ 2441.539674] drm/i915: Resetting chip after gpu hang
Furthermore, there are weird, small display distortions occuring. I don't get any log about them and don't have a screenshot. Well. Nevermind. Please fix 4.11 and CC anyone I forgot.
thanks
martin
GPU HANG: ecode 7:0:0xf3cffffe, in gnome-shell [1869], reason: Hang on render ring, action: reset
Kernel: 4.11.0-rc3-00003-gbc61cd2
Time: 1490170621 s 524489 us
Boottime: 2409 s 756155 us
Uptime: 2395 s 323536 usis_mobile: nois_lp: nois_alpha_support: nohas_64bit_reloc: nohas_aliasing_ppgtt: yeshas_csr: nohas_ddi: yeshas_decoupled_mmio: nohas_dp_mst: yeshas_fbc: yeshas_fpga_dbg: yeshas_full_ppgtt: yeshas_full_48bit_ppgtt: nohas_gmbus_irq: yeshas_gmch_display: nohas_guc: nohas_hotplug: yeshas_hw_contexts: yeshas_l3_dpf: yeshas_llc: yeshas_logical_ring_contexts: nohas_overlay: nohas_pipe_cxsr: nohas_pooled_eu: nohas_psr: yeshas_rc6: yeshas_rc6p: nohas_resource_streamer: yeshas_runtime_pm: yeshas_snoop: nocursor_needs_physical: nohws_needs_physical: nooverlay_needs_physical: nosupports_tv: no
Active process (on ring render): gnome-shell [1869], context bans 0
Reset count: 0
Suspend count: 0
Platform: HASWELL
PCI ID: 0x0416
PCI Revision: 0x06
PCI Subsystem: 10cf:17ac
IOMMU enabled?: 0
EIR: 0x00000000
IER: 0xfc002529
GTIER: 0x00401821PGTBL_ER: 0x00000000
FORCEWAKE: 0x00000001
DERRMR: 0xffffffff
CCID: 0x00ef410d
Missed interrupts: 0x00000000
fence[0] = 00000000
fence[1] = 00000000
fence[2] = 00000000
fence[3] = 00000000
fence[4] = 00000000
fence[5] = 00000000
fence[6] = 00000000
fence[7] = 00000000
fence[8] = 00000000
fence[9] = 00000000
fence[10] = 00000000
fence[11] = 00000000
fence[12] = 00000000
fence[13] = 00000000
fence[14] = 00000000
fence[15] = 00000000
fence[16] = 00000000
fence[17] = 00000000
fence[18] = 4b530770374a001
fence[19] = 00000000
fence[20] = 00000000
fence[21] = 00000000
fence[22] = 00000000
fence[23] = 00000000
fence[24] = 00000000
fence[25] = 00000000
fence[26] = 00000000
fence[27] = 00000000
fence[28] = 00000000
fence[29] = 00000000
fence[30] = 00000000
fence[31] = 00000000
ERROR: 0x00000109DONE_REG: 0xffffffffERR_INT: 0x00000000
render command stream:
START: 0x007ea000
HEAD: 0x07a1f6dc [0x0001f648] TAIL: 0x0001f8f8 [0x0001f728, 0x0001f760] CTL: 0x0001f001 MODE: 0x00004000 HWS: 0x7fff0000
ACTHD: 0x00000000 07a1f6dc
IPEIR: 0x00000000
IPEHR: 0x0c000000
INSTDONE: 0xffcffffe
SC_INSTDONE: 0xffffffff SAMPLER_INSTDONE[0][0]: 0xffffffff ROW_INSTDONE[0][0]: 0xffffffff
BBADDR: 0x00000000_7fa48330
BB_STATE: 0x00000000
INSTPS: 0x00000500
INSTPM: 0x00006080
FADDR: 0x00000000 008096d8
RC PSMI: 0x00000010
FAULT_REG: 0x000000c5
SYNC_0: 0x00000000
SYNC_1: 0x0001c2a1
SYNC_2: 0x00000000
GFX_MODE: 0x00002a00
PP_DIR_BASE: 0x7fdf0000
seqno: 0x0001c29a
last_seqno: 0x0001c2a2
waiting: yes
ring->head: 0x00016e60
ring->tail: 0x0001f8f8
hangcheck stall: yes
hangcheck action: dead
hangcheck action timestamp: 4295493232, 204600 ms ago
blt command stream:
START: 0x0080a000
HEAD: 0x07e0e8d0 [0x00000000] TAIL: 0x0000e8d0 [0x00000000, 0x00000000] CTL: 0x0001f001 MODE: 0x00000200 HWS: 0x7fff1000
ACTHD: 0x00000000 07e0e8d0
IPEIR: 0x00000000
IPEHR: 0x01000000
INSTDONE: 0xfffffffe
BBADDR: 0x00000000_7fff4028
BB_STATE: 0x00000000
INSTPS: 0x00000000
INSTPM: 0x00000000
FADDR: 0x00000000 008188d0
RC PSMI: 0x00000011
FAULT_REG: 0x00000000
SYNC_0: 0x0001c29a
SYNC_1: 0x00000000
SYNC_2: 0x00000000
GFX_MODE: 0x00000200
PP_DIR_BASE: 0x7fdf0000
seqno: 0x0001c2a1
last_seqno: 0x0001c2a1
waiting: no
ring->head: 0x00000000
ring->tail: 0x00000000
hangcheck stall: no
hangcheck action: idle
hangcheck action timestamp: 4295494736, 198584 ms ago
bsd command stream:
START: 0x0082a000
HEAD: 0x00000000 [0x00000000] TAIL: 0x00000000 [0x00000000, 0x00000000] CTL: 0x0001f001 MODE: 0x00000200 HWS: 0x7fff2000
ACTHD: 0x00000000 00000000
IPEIR: 0x00000000
IPEHR: 0x00000000
INSTDONE: 0xfffffffe
BBADDR: 0x00000000_00000000
BB_STATE: 0x00000000
INSTPS: 0x00000000
INSTPM: 0x00000000
FADDR: 0x00000000 0082a000
RC PSMI: 0x00000011
FAULT_REG: 0x00000000
SYNC_0: 0x0001c2a1
SYNC_1: 0x0001c29a
SYNC_2: 0x00000000
GFX_MODE: 0x00000200
PP_DIR_BASE: 0x00000000
seqno: 0x00000000
last_seqno: 0x00000000
waiting: no
ring->head: 0x00000000
ring->tail: 0x00000000
hangcheck stall: no
hangcheck action: idle
hangcheck action timestamp: 4295494736, 198584 ms ago
vebox command stream:
START: 0x0084a000
HEAD: 0x00000000 [0x00000000] TAIL: 0x00000000 [0x00000000, 0x00000000] CTL: 0x0001f001 MODE: 0x00000200 HWS: 0x7fff3000
ACTHD: 0x00000000 00000000
IPEIR: 0x00000000
IPEHR: 0x00000000
INSTDONE: 0xfffffffe
BBADDR: 0x00000000_00000000
BB_STATE: 0x00000000
INSTPS: 0x00000000
INSTPM: 0x00000000
FADDR: 0x00000000 0084a000
RC PSMI: 0x00000011
FAULT_REG: 0x00000000
SYNC_0: 0x0001c2a1
SYNC_1: 0x0001c29a
SYNC_2: 0x00000000
GFX_MODE: 0x00000200
PP_DIR_BASE: 0x00000000
seqno: 0x00000000
last_seqno: 0x00000000
waiting: no
ring->head: 0x00000000
ring->tail: 0x00000000
hangcheck stall: no
hangcheck action: idle
hangcheck action timestamp: 4295494736, 198584 ms ago
Active (render ring) [40]:
00000000_7fff8000 8192 37 00 [ 1c29e 00 00 00 00 ] 00 LLC
00000000_7e9df000 20971520 36 00 [ 1c29e 00 00 00 00 ] 00 X uncached (name: 2)
00000000_7fff7000 4096 36 00 [ 1c29e 00 00 00 00 ] 00 LLC
00000000_7d5df000 20971520 36 00 [ 1c29e 00 00 00 00 ] 00 Y LLC
00000000_7c1df000 20971520 36 00 [ 1c29e 00 00 00 00 ] 00 Y LLC
00000000_7bcdf000 5242880 36 00 [ 1c29e 00 00 00 00 ] 00 LLC
00000000_7fff6000 4096 37 00 [ 1c29e 00 00 00 00 ] 00 LLC
00000000_7b2df000 10485760 37 00 [ 1c29e 00 00 00 00 ] 00 X LLC (name: 10)
00000000_7b2d5000 40960 37 00 [ 1c29e 00 00 00 00 ] 00 LLC
00000000_7a8d5000 10485760 37 00 [ 1c29e 00 00 00 00 ] 00 X LLC (name: 8)
00000000_7a655000 2621440 37 00 [ 1c29e 00 00 00 00 ] 00 Y LLC
00000000_7fff5000 4096 37 00 [ 1c29e 00 00 00 00 ] 00 LLC
00000000_7a575000 917504 37 00 [ 1c29e 00 00 00 00 ] 00 X LLC (name: 11)
00000000_7a535000 262144 37 00 [ 1c29e 00 00 00 00 ] 00 Y LLC
00000000_79b35000 10485760 37 00 [ 1c29e 00 00 00 00 ] 00 X LLC (name: 5)
00000000_79535000 6291456 37 00 [ 1c29e 00 00 00 00 ] 00 X LLC (name: 12)
00000000_793b5000 1572864 37 00 [ 1c29e 00 00 00 00 ] 00 Y LLC
00000000_793ad000 32768 37 00 [ 1c29e 00 00 00 00 ] 00 dirty LLC
00000000_00ef3000 4096 09 00 [ 1c29e 00 00 00 00 ] 00 dirty purgeable LLC
00000000_77f9d000 4096 37 00 [ 1c2a0 00 00 00 00 ] 00 dirty LLC
00000000_77f9c000 4096 37 00 [ 1c2a0 00 00 00 00 ] 00 LLC
00000000_77f98000 16384 37 00 [ 1c2a0 00 00 00 00 ] 00 purgeable LLC
00000000_77f97000 4096 37 00 [ 1c2a0 00 00 00 00 ] 00 LLC
00000000_77e97000 1048576 37 00 [ 1c2a0 00 00 00 00 ] 00 X LLC
00000000_77e93000 16384 37 00 [ 1c2a0 00 00 00 00 ] 00 dirty purgeable LLC
00000000_7fffa000 16384 37 00 [ 1c2a0 00 00 00 00 ] 00 dirty LLC
00000000_00f06000 4096 09 00 [ 1c2a0 00 00 00 00 ] 00 dirty purgeable LLC
00000000_77fa8000 4096 37 00 [ 1c2a2 00 00 00 00 ] 00 LLC
00000000_77fa1000 28672 37 00 [ 1c2a2 00 00 00 00 ] 00 LLC
00000000_77fa0000 4096 37 00 [ 1c2a2 00 00 00 00 ] 00 LLC
00000000_77f9f000 4096 37 00 [ 1c2a2 00 00 00 00 ] 00 LLC
00000000_77f9e000 4096 37 00 [ 1c2a2 00 00 00 00 ] 00 LLC
00000000_77e56000 4096 37 00 [ 1c2a2 00 00 00 00 ] 00 dirty LLC
00000000_77e55000 4096 37 00 [ 1c2a2 00 00 00 00 ] 00 LLC
00000000_77e51000 16384 37 00 [ 1c2a2 00 00 00 00 ] 00 purgeable LLC
00000000_77e5b000 229376 36 00 [ 1c2a2 00 00 00 00 ] 00 X LLC
00000000_789ad000 10485760 36 00 [ 1c2a2 00 00 00 00 ] 00 X LLC
00000000_77e4d000 16384 37 00 [ 1c2a2 00 00 00 00 ] 00 purgeable LLC
00000000_77fa9000 16384 37 00 [ 1c2a2 00 00 00 00 ] 00 dirty LLC
00000000_00f07000 4096 09 00 [ 1c2a2 00 00 00 00 ] 00 dirty purgeable LLC
Pinned (global) [15]:
00000000_7fddf000 69632 41 00 [ 00 00 00 00 00 ] 00 LLC
00000000_7fff0000 4096 01 01 [ 00 00 00 00 00 ] 00 purgeable LLC
00000000_007ea000 131072 40 40 [ 00 00 00 00 00 ] 00 dirty LLC
00000000_7fffe000 4096 41 00 [ 00 00 00 00 00 ] 00 LLC
00000000_7fff1000 4096 01 01 [ 00 00 00 00 00 ] 00 purgeable LLC
00000000_0080a000 131072 40 40 [ 00 00 00 00 00 ] 00 dirty LLC
00000000_7fff2000 4096 01 01 [ 00 00 00 00 00 ] 00 purgeable LLC
00000000_0082a000 131072 40 40 [ 00 00 00 00 00 ] 00 dirty LLC
00000000_7fff3000 4096 01 01 [ 00 00 00 00 00 ] 00 purgeable LLC
00000000_0084a000 131072 40 40 [ 00 00 00 00 00 ] 00 dirty LLC
00000000_00000000 8294400 41 00 [ 00 00 00 00 00 ] 00 uncached
00000000_00f49000 16384 40 00 [ 00 00 00 00 00 ] 00 dirty uncached
00000000_00ee2000 69632 41 00 [ 00 00 00 00 00 ] 00 LLC
00000000_00ef4000 69632 41 00 [ 00 00 00 00 00 ] 00 LLC
00000000_0374a000 20971520 36 00 [ 00 00 00 00 00 ] 00 X dirty uncached (name: 3) (fence: 18)render ring --- 3 requests
pid 1869, ban score 0, seqno 4:0001c29e, emitted 207960ms ago, head 0001f648, tail 0001f760
pid 934, ban score 0, seqno 1:0001c2a0, emitted 207924ms ago, head 0001f760, tail 0001f878
pid 934, ban score 0, seqno 1:0001c2a2, emitted 207908ms ago, head 0001f878, tail 0001f8f8
render ring --- 2 waiters
seqno 0x0001c29e for gnome-shell [1869]
seqno 0x0001c2a0 for Xorg [934]
Num Pipes: 3PWR_WELL_CTL2: c0000000
Pipe [0]:
Power: on
SRC: 077f04af
STAT: 00000000
Plane [0]:
CNTR: d9000400
STRIDE: 00003c00
SURF: 0374a000
TILEOFF: 00000000
Cursor [0]:
CNTR: 05000027
POS: 02740205
BASE: 00f49000
Pipe [1]:
Power: on
SRC: 077f0437
STAT: 00000000
Plane [1]:
CNTR: d9000400
STRIDE: 00003c00
SURF: 03759000
TILEOFF: 00000000
Cursor [1]:
CNTR: 00000000
POS: 00000000
BASE: 00000000
Pipe [2]:
Power: on
SRC: 00000000
STAT: 00000000
Plane [2]:
CNTR: 00000000
STRIDE: 00000000
SURF: 00000000
TILEOFF: 00000000
Cursor [2]:
CNTR: 00000000
POS: 00000000
BASE: 00000000
CPU transcoder: A
Power: on
CONF: c0000000
HTOTAL: 081f077f
HBLANK: 081f077f
HSYNC: 07cf07af
VTOTAL: 04d204af
VBLANK: 04d204af
VSYNC: 04b804b2
CPU transcoder: B
Power: on
CONF: 00000000
HTOTAL: 072f068f
HBLANK: 072f068f
HSYNC: 06df06bf
VTOTAL: 04560437
VBLANK: 04370419
VSYNC: 0422041c
CPU transcoder: C
Power: on
CONF: 00000000
HTOTAL: 00000000
HBLANK: 00000000
HSYNC: 00000000
VTOTAL: 00000000
VBLANK: 00000000
VSYNC: 00000000
CPU transcoder: EDP
Power: on
CONF: c0000000
HTOTAL: 081f077f
HBLANK: 081f077f
HSYNC: 07cf07af
VTOTAL: 04560437
VBLANK: 04560437
VSYNC: 043f043a
Jani Nikula
maintainerQuoted 5 lines · Martin Kepplinger
I know something similar is here:
https://bugs.freedesktop.org/show_bug.cgi?id=100110 too.But this is rc3 and my machine is totally *not usable*. Let me be annoying :) I hope I can help:
Please file a bug over at [1].
Thanks,
Jani.
[1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI&component=DRM/Intel
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 8 lines · Jani Nikula
Quoted 4 lines · Martin Kepplinger
I know something similar is here:
https://bugs.freedesktop.org/show_bug.cgi?id=100110 too. But this is rc3 and my machine is totally *not usable*. Let me be annoying :) I hope I can help:Please file a bug over at [1].
[…]
[1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI&component=DRM/Intel
@Martin: did you file that bug? I could not find one :-/
@Jani: In similar situations could you do me a favour and ask people to send one more reply to the public list which contains the link to the bug filed? Regression tracking is quite hard already; searching various bug tracker for follow up bug entries makes it even harder :-(
Ciao, Thorsten
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Am 2. April 2017 13:50:26 MESZ schrieb Thorsten Leemhuis <[email protected]>:
Quoted 6 lines
Quoted 5 lines · Jani Nikula
Quoted 4 lines · Martin Kepplinger
I know something similar is here:
https://bugs.freedesktop.org/show_bug.cgi?id=100110 too. But this is rc3 and my machine is totally *not usable*. Let me be annoying :) I hope I can help:
Quoted 6 lines
Quoted 3 lines
Please file a bug over at [1].
[…]
[1]https://bugs.freedesktop.org/enter_bug.cgi?product=DRI&component=DRM/Intel
@Martin: did you file that bug? I could not find one :-/
I did. Got marked as duplicate of https://bugs.freedesktop.org/show_bug.cgi?id=100181 and there's a fix out there. I don't know if it's in rc5 though.
Quoted 7 lines
@Jani: In similar situations could you do me a favour and ask people to send one more reply to the public list which contains the link to the bug filed? Regression tracking is quite hard already; searching various bug tracker for follow up bug entries makes it even harder :-(
Ciao, Thorsten
Signature · 7 lines
Martin Kepplinger http://martinkepplinger.com sent from mobile _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerQuoted 7 lines · Martin Kepplinger
Am 2. April 2017 13:50:26 MESZ schrieb Thorsten Leemhuis <[email protected]>:
Quoted 6 lines
Quoted 5 lines · Jani Nikula
Quoted 4 lines · Martin Kepplinger
I know something similar is here:
https://bugs.freedesktop.org/show_bug.cgi?id=100110 too. But this is rc3 and my machine is totally *not usable*. Let me be annoying :) I hope I can help:
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Please file a bug over at [1].
[…]
[1]https://bugs.freedesktop.org/enter_bug.cgi?product=DRI&component=DRM/Intel
@Martin: did you file that bug? I could not find one :-/
I did. Got marked as duplicate of https://bugs.freedesktop.org/show_bug.cgi?id=100181 and there's a fix out there. I don't know if it's in rc5 though.
Should be fixed in v4.11-rc5 by
commit 0abfe7e2570d7c729a7662e82c09a23f00f29346
Author: Chris Wilson <[email protected]> Date: Wed Mar 22 20:59:30 2017 +0000
drm/i915: Restore marking context objects as dirty on pinning
Quoted 4 lines
Quoted 4 lines
@Jani: In similar situations could you do me a favour and ask people to send one more reply to the public list which contains the link to the bug filed? Regression tracking is quite hard already; searching various bug tracker for follow up bug entries makes it even harder :-(
I'll try, thanks for the feedback.
BR,
Jani.
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
I'm also getting kernel hangs every couple of days. For me it's still not fixed here in 4.11-rc5. It's hard to reproduce, the best reproducer is to build lineageos 14.1 on host while running LTP in a guest to stress the guest VM.
Initially I thought it was related to the fact I upgraded the xf86 intel driver just a few weeks ago (I deferred any upgrade of the userland intel driver since last July because of a regression that never got fixed and broke xterm for me). After I found a workaround for the userland regression (appended at the end for reference) I started getting kernel hangs but they are separate issues as far as I can tell.
It's not well tested so beware... (it survived a couple of builds and some VM reclaim but that's it).
The first patch 1/5 is the potential fix for the i915 kernel hang. The rest are incremental improvements.
And I've no great solution for when the shrinker was invoked with the struct_mutex held and and recurse on the lock. I don't think we can possibly wait in such case (other than flush work that the second patch does) but then practically it shouldn't be a big deal, the big RAM eater is unlikely to be i915 when the system is low on memory.
Andrea Arcangeli (5):
i915: avoid kernel hang caused by synchronize rcu struct_mutex
deadlock
i915: flush gem obj freeing workqueues to add accuracy to the i915
shrinker
i915: initialize the free_list of the fencing atomic_helper
i915: schedule while freeing the lists of gem objects
i915: fence workqueue optimization
drivers/gpu/drm/i915/i915_gem.c | 15 +++++++++++++++ drivers/gpu/drm/i915/i915_gem_shrinker.c | 15 +++++++++++---- drivers/gpu/drm/i915/intel_display.c | 7 ++++--- 3 files changed, 30 insertions(+), 7 deletions(-)
===
Userland workaround for unusable xterm after commit 3d3d18f086cdda72ee18a454db70ca72c6e3246c (unrelated to this kernel issue, just for reference of what I'm running in userland).
src/sna/sna_accel.c +4 -0
@@ -17430,11 +17430,15 @@ sna_flush_callback(CallbackListPtr *list, pointer user_data, pointer call_data) {struct sna *sna = user_data; +#if 0 if (!sna->needs_dri_flush)return ; +#endif sna_accel_flush (sna); +#if 0 sna->needs_dri_flush = false; +#endif } static void
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/5 i915: avoid kernel hang caused by synchronize rcu struct_mutex deadlock
synchronize_rcu/synchronize_sched/synchronize_rcu_expedited() will hang until its own workqueues are run. The i915 gem workqueues will wait on the struct_mutex to be released. So we cannot wait for a quiescent state using those rcu primitives while holding the struct_mutex or it creates a circular lock dependency resulting in kernel hangs (which is reproducible but goes undetected by lockdep).
This started in commit 3d3d18f086cdda72ee18a454db70ca72c6e3246c and lockdep didn't detect it apparently.
kswapd0 D 0 700 2 0x00000000
Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? _synchronize_rcu_expedited.constprop.65+0x2ef/0x300 ? wake_up_bit+0x20/0x20 ? rcu_stall_kick_kthreads.part.54+0xc0/0xc0 ? rcu_exp_wait_wake+0x530/0x530 ? i915_gem_shrink+0x34b/0x4b0 ? i915_gem_shrinker_scan+0x7c/0x90 ? i915_gem_shrinker_scan+0x7c/0x90 ? shrink_slab.part.61.constprop.72+0x1c1/0x3a0 ? shrink_zone+0x154/0x160 ? kswapd+0x40a/0x720 ? kthread+0xf4/0x130 ? try_to_free_pages+0x450/0x450 ? kthread_create_on_node+0x40/0x40 ? ret_from_fork+0x23/0x30 plasmashell D 0 4657 4614 0x00000000 Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? schedule_preempt_disabled+0xe/0x10 ? __mutex_lock.isra.4+0x1c9/0x790 ? i915_gem_close_object+0x26/0xc0 ? i915_gem_close_object+0x26/0xc0 ? drm_gem_object_release_handle+0x48/0x90 ? drm_gem_handle_delete+0x50/0x80 ? drm_ioctl+0x1fa/0x420 ? drm_gem_handle_create+0x40/0x40 ? pipe_write+0x391/0x410 ? __vfs_write+0xc6/0x120 ? do_vfs_ioctl+0x8b/0x5d0 ? SyS_ioctl+0x3b/0x70 ? entry_SYSCALL_64_fastpath+0x13/0x94 kworker/0:0 D 0 29186 2 0x00000000 Workqueue: events __i915_gem_free_work Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? schedule_preempt_disabled+0xe/0x10 ? __mutex_lock.isra.4+0x1c9/0x790 ? del_timer_sync+0x44/0x50 ? update_curr+0x57/0x110 ? __i915_gem_free_objects+0x31/0x300 ? __i915_gem_free_objects+0x31/0x300 ? __i915_gem_free_work+0x2d/0x40 ? process_one_work+0x13a/0x3b0 ? worker_thread+0x4a/0x460 ? kthread+0xf4/0x130 ? process_one_work+0x3b0/0x3b0 ? kthread_create_on_node+0x40/0x40 ? ret_from_fork+0x23/0x30
--- drivers/gpu/drm/i915/i915_gem.c | 9 +++++++++ drivers/gpu/drm/i915/i915_gem_shrinker.c | 14 ++++++++++---- 2 files changed, 19 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_gem.c +9 -0
@@ -4742,6 +4742,13 @@ int i915_gem_freeze(struct drm_i915_private *dev_priv)i915_gem_shrink_all (dev_priv);mutex_unlock (&dev_priv->drm.struct_mutex); +/* +* Cannot call synchronize_rcu() inside the struct_mutex +* because it may block until workqueues complete, and the +* running workqueue may wait on the struct_mutex. +*/ +synchronize_rcu ();/* wait for our earlier RCU delayed slab frees */ +intel_runtime_pm_put (dev_priv);return 0 ;
@@ -4781,6 +4788,8 @@ int i915_gem_freeze_late(struct drm_i915_private *dev_priv) }mutex_unlock (&dev_priv->drm.struct_mutex); +synchronize_rcu_expedited (); +return 0 ; }
drivers/gpu/drm/i915/i915_gem_shrinker.c +10 -4
@@ -235,9 +235,6 @@ i915_gem_shrink(struct drm_i915_private *dev_priv,if (unlock)mutex_unlock (&dev_priv->drm.struct_mutex); -/* expedite the RCU grace period to free some request slabs */ -synchronize_rcu_expedited (); -return count; }
@@ -263,7 +260,6 @@ unsigned long i915_gem_shrink_all(struct drm_i915_private *dev_priv)I915_SHRINK_BOUND |I915_SHRINK_UNBOUND | I915_SHRINK_ACTIVE); -synchronize_rcu ();/* wait for our earlier RCU delayed slab frees */ return freed; }
@@ -324,6 +320,16 @@ i915_gem_shrinker_scan(struct shrinker *shrinker, struct shrink_control *sc)if (unlock)mutex_unlock (&dev->struct_mutex); +if (likely (__mutex_owner (&dev->struct_mutex) != current)) +/* +* If reclaim was invoked by an allocation done while +* holding the struct mutex, we cannot call +* synchronize_rcu_expedited() as it depends on +* workqueues to run but the running workqueue may be +* blocked waiting on us to release struct_mutex. +*/ +synchronize_rcu_expedited (); +return freed; }
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Joonas Lahtinen
maintainerRe: [Intel-gfx] [PATCH 1/5] i915: avoid kernel hang caused by synchronize rcu struct_mutex deadlock
Quoted 9 lines · Andrea Arcangeli
synchronize_rcu/synchronize_sched/synchronize_rcu_expedited() will hang until its own workqueues are run. The i915 gem workqueues will wait on the
struct_mutexto be released. So we cannot wait for a quiescent state using those rcu primitives while holding thestruct_mutexor it creates a circular lock dependency resulting in kernel hangs (which is reproducible but goes undetected by lockdep).This started in commit
3d3d18f086cdda72ee18a454db70ca72c6e3246cand lockdep didn't detect it apparently.
The right format is;
drivers/gpu/drm/i915/i915_gem_shrinker.c i915_gem_shrinker_scan(struct shrinker *shrinker, struct shrink_control *sc) · line 323
Quoted 5 lines
drivers/gpu/drm/i915/i915_gem_shrinker.c +0
-0@@ -324,6 +320,16 @@ i915_gem_shrinker_scan(struct shrinker *shrinker, struct shrink_control *sc) if (unlock) mutex_unlock(&dev->struct_mutex);drivers/gpu/drm/i915/i915_gem_shrinker.c +1
-0+if (likely (__mutex_owner (&dev->struct_mutex) != current))
This check can be dropped and synchronize_rcu_expedited() should be embedded directly to the if (unlock) branch as it's functionally equivalent. This can be applied to all the unlock cases, not just this one. That should be the correct action to avoid the deadlock. I've sent a patch to do this (Cc'd you), can you verify that it gets rid of the problem for you?
Quoted 16 lines
drivers/gpu/drm/i915/i915_gem_shrinker.c +9
-0+/* +* If reclaim was invoked by an allocation done while +* holding the struct mutex, we cannot call +* synchronize_rcu_expedited() as it depends on +* workqueues to run but the running workqueue may be +* blocked waiting on us to release struct_mutex. +*/ +synchronize_rcu_expedited (); +return freed;
}
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Joonas Lahtinen Open Source Technology Center Intel Corporation _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 2/5 i915: flush gem obj freeing workqueues to add accuracy to the i915 shrinker
In reply to Andrea ArcangeliWaiting a RCU grace period only guarantees the work gets queued, but until after the queued workqueue returns, there's no guarantee the memory was actually freed. So flush the work to provide better guarantees to the reclaim code in addition of waiting a RCU grace period to pass.
--- drivers/gpu/drm/i915/i915_gem.c | 2 ++ drivers/gpu/drm/i915/i915_gem_shrinker.c | 1 + 2 files changed, 3 insertions(+)
drivers/gpu/drm/i915/i915_gem.c +2 -0
@@ -4748,6 +4748,7 @@ int i915_gem_freeze(struct drm_i915_private *dev_priv)* running workqueue may wait on the struct_mutex. */ synchronize_rcu ();/* wait for our earlier RCU delayed slab frees */ +flush_work (&dev_priv->mm.free_work);intel_runtime_pm_put (dev_priv);
@@ -4789,6 +4790,7 @@ int i915_gem_freeze_late(struct drm_i915_private *dev_priv)mutex_unlock (&dev_priv->drm.struct_mutex);synchronize_rcu_expedited (); +flush_work (&dev_priv->mm.free_work);return 0 ; }
drivers/gpu/drm/i915/i915_gem_shrinker.c +1 -0
@@ -329,6 +329,7 @@ i915_gem_shrinker_scan(struct shrinker *shrinker, struct shrink_control *sc)* blocked waiting on us to release struct_mutex. */ synchronize_rcu_expedited (); +flush_work (&dev_priv->mm.free_work);return freed; }
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/5] i915: flush gem obj freeing workqueues to add accuracy to the i915 shrinker
Quoted 5 lines · Andrea Arcangeli
Waiting a RCU grace period only guarantees the work gets queued, but until after the queued workqueue returns, there's no guarantee the memory was actually freed. So flush the work to provide better guarantees to the reclaim code in addition of waiting a RCU grace period to pass.
We are not allowed to call flush_work() from the shrinker, the workqueue doesn't have and can't have the right reclaim flags.
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/5] i915: flush gem obj freeing workqueues to add accuracy to the i915 shrinker
Quoted 9 lines · Chris Wilson
Quoted 5 lines · Andrea Arcangeli
Waiting a RCU grace period only guarantees the work gets queued, but until after the queued workqueue returns, there's no guarantee the memory was actually freed. So flush the work to provide better guarantees to the reclaim code in addition of waiting a RCU grace period to pass.
We are not allowed to call
flush_work()from the shrinker, the workqueue doesn't have and can't have the right reclaim flags.
I figured the flush_work had to be conditional to "unlock" being true too in the i915 shrinker (not only synchronize_rcu_expedited()), and I already fixed that bit, but I didn't think it would be a problem to wait for the workqueue as long as reclaim didn't recurse on the struct_mutex (it is a problem if unlock is false of course as we would be back to square one). I didn't get further hangs and I assume I've been running a couple of synchronize_rcu_expedited() and flush_work (I should add dynamic tracing to be sure).
Also note, I didn't get any lockdep warning when I reproduced the workqueue hang in 4.11-rc5 so at least as far as lockdep is concerned there's no problem to call synchronize_rcu_expedited and it couldn't notice we were holding the struct_mutex while waiting for the new workqueue to run.
Also note recursing on the lock (unlock false case) is something nothing else does, I'm not sure if it's worth the risk and if you shouldn't just call mutex_trylock in the shrinker instead of mutex_trylock_recursive. One thing was to recurse on the lock internally in the same context, but recursing through the whole reclaim is more dubious as safe.
You could start dropping objects and wiping vmas and stuff in the middle of some kmalloc/alloc_pages that doesn't expect it and then crash for other reasons. So this reclaim recursion model of the shinker is quite unique and quite challenging to proof as safe if you keep using mutex_trylock_recursive in i915_gem_shrinker_scan.
Lock recursion in all other places could be dropped without runtime downsides, the only place mutex_trylock_recursive makes a design difference and makes sense to be used is in i915_gem_shrinker_scan, the rest are implementation issues not fundamental shrinker design and it'd be nice if those other mutex_trylock_recursive would all be removed and the only one that is left is in i915_gem_shrinker_scan and nowhere else (or to drop it also from i915_gem_shrinker_scan).
mutex_trylock_recursive() should also be patched to use READ_ONCE(__mutex_owner(lock)) because currently it breaks C.
In the whole kernel i915 and msm drm are the only two users of such function in fact.
Another thing is what value return from i915_gem_shrinker_scan when unlock is false, and we can't possibly wait for the memory to be freed let alone for a rcu grace period. For various reasons I think it's safer to return the current "free" even if we could also return "0" in such case. There are different tradeoffs, returning "free" is less likely to trigger an early OOM as the VM thinks it's still making progress and in fact it will get more free memory shortly, while returning SHRINK_STOP would also be an option and it would insist more on the other slabs so it would be more reliable at freeing memory timely, but it would be more at risk of early OOM. I think returning "free" is the better tradeoff of the two, but I suggest to add a comment as it's not exactly obvious what is better.
Thanks,
Andrea
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/5] i915: flush gem obj freeing workqueues to add accuracy to the i915 shrinker
Quoted 11 lines · Andrea Arcangeli
Quoted 9 lines · Chris Wilson
Quoted 5 lines · Andrea Arcangeli
Waiting a RCU grace period only guarantees the work gets queued, but until after the queued workqueue returns, there's no guarantee the memory was actually freed. So flush the work to provide better guarantees to the reclaim code in addition of waiting a RCU grace period to pass.
We are not allowed to call
flush_work()from the shrinker, the workqueue doesn't have and can't have the right reclaim flags.
Quoted 8 lines
I figured the
flush_workhad to be conditional to "unlock" being true too in the i915 shrinker (not onlysynchronize_rcu_expedited()), and I already fixed that bit, but I didn't think it would be a problem to wait for the workqueue as long as reclaim didn't recurse on thestruct_mutex(it is a problem if unlock is false of course as we would be back to square one). I didn't get further hangs and I assume I've been running a couple ofsynchronize_rcu_expedited()andflush_work(I should add dynamic tracing to be sure).
Not getting hangs is a good sign, but lockdep doesn't like it:
[ 460.684901] WARNING: CPU: 1 PID: 172 at kernel/workqueue.c:2418 check_flush_dependency+0x92/0x130 [ 460.684924] workqueue: PF_MEMALLOC task 172(kworker/1:1H) is flushing !WQ_MEM_RECLAIM events:__i915_gem_free_work [i915]
If I allocated the workqueue with WQ_MEM_RELCAIM, it complains bitterly as well.
Quoted 5 lines
Also note, I didn't get any lockdep warning when I reproduced the workqueue hang in 4.11-rc5 so at least as far as lockdep is concerned there's no problem to call
synchronize_rcu_expeditedand it couldn't notice we were holding thestruct_mutexwhile waiting for the new workqueue to run.
Yes, that is concerning. I think it's due to the coupling via the struct completion that is not being picked up lockdep, and I hope the "crossrelease" patches would fix the lack of warnings.
Quoted 6 lines
Also note recursing on the lock (unlock false case) is something nothing else does, I'm not sure if it's worth the risk and if you shouldn't just call
mutex_trylockin the shrinker instead ofmutex_trylock_recursive. One thing was to recurse on the lock internally in the same context, but recursing through the whole reclaim is more dubious as safe.
We know. We don't use trylock in order to reduce the frequency of users' oom. Peter added mutex_trylock_recursive() because we already were doing recursive locking in the shrinker and although we know we shouldn't, getting rid of the recursion is something we are doing, but slowly.
Quoted 5 lines
You could start dropping objects and wiping vmas and stuff in the middle of some kmalloc/alloc_pages that doesn't expect it and then crash for other reasons. So this reclaim recursion model of the shinker is quite unique and quite challenging to proof as safe if you keep using
mutex_trylock_recursiveini915_gem_shrinker_scan.
I know. Trying to stay on top of all the kmallocs under the struct_mutex and being aware that the shrinker can and will undo your objects as you work is a continual battle. And catches everyone working on i915.ko by surprise. Our policy to avoid surprises is based around pin before alloc.
Quoted 7 lines
Lock recursion in all other places could be dropped without runtime downsides, the only place
mutex_trylock_recursivemakes a design difference and makes sense to be used is ini915_gem_shrinker_scan, the rest are implementation issues not fundamental shrinker design and it'd be nice if those othermutex_trylock_recursivewould all be removed and the only one that is left is ini915_gem_shrinker_scanand nowhere else (or to drop it also fromi915_gem_shrinker_scan).
We do need it for shrinker_count as well. If we just report 0 objects, the shrinker_scan callback will be skipped, iirc. All we do need it for direct calls to i915_gem_shrink() which themselves may or may not be underneath the struct_mutex at the time.
Quoted 2 lines
mutex_trylock_recursive()should also be patched to use READ_ONCE(__mutex_owner(lock)) because currently it breaks C.
I don't follow,
static inline struct task_struct *__mutex_owner(struct mutex *lock)
{
return (struct task_struct *)(atomic_long_read(&lock->owner) & ~0x07);
}The atomic read is equivalent to READ_ONCE(). What's broken here? (I guess strict aliasing and pointer cast?)
Quoted 2 lines
In the whole kernel i915 and msm drm are the only two users of such function in fact.
Yes, Peter will continue to remind us to fix our code and complain until it is.
Quoted 4 lines
Another thing is what value return from
i915_gem_shrinker_scanwhen unlock is false, and we can't possibly wait for the memory to be freed let alone for a rcu grace period. For various reasons I think it's safer to return the current "free" even if we could also return "0" in
Quoted 8 lines
such case. There are different tradeoffs, returning "free" is less likely to trigger an early OOM as the VM thinks it's still making progress and in fact it will get more free memory shortly, while returning
SHRINK_STOPwould also be an option and it would insist more on the other slabs so it would be more reliable at freeing memory timely, but it would be more at risk of early OOM. I think returning "free" is the better tradeoff of the two, but I suggest to add a comment as it's not exactly obvious what is better.
Ah. The RCU freeing is only for the small fry, the slabs from which requests and objects are allocated. It's the gigabytes of pages we have pinned that can be released by i915_gem_shrink() are what we count as freed, even though we only return them to the system and hope the lru anon page scanner will make available for reuse (if they are dirty, they will need to be swapped out, but some will be returned to the system directly by truncating the shmemfs filp backing an object.) -Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/5] i915: flush gem obj freeing workqueues to add accuracy to the i915 shrinker
Quoted 7 lines · Chris Wilson
Not getting hangs is a good sign, but lockdep doesn't like it:
[ 460.684901] WARNING: CPU: 1 PID: 172 at kernel/workqueue.c:2418 check_flush_dependency+0x92/0x130 [ 460.684924] workqueue: PF_MEMALLOC task 172(kworker/1:1H) is flushing !WQ_MEM_RECLAIM events:__i915_gem_free_work [i915]If I allocated the workqueue with
WQ_MEM_RELCAIM, it complains bitterly as well.
So in PF_MEMALLOC context we can't flush a workqueue with !WQ_MEM_RECLAIM.
system_wq = alloc_workqueue("events", 0, 0);My point is synchronize_rcu_expedited will still push its work in the same system_wq workqueue...
/* Marshall arguments & schedule the expedited grace period. */ rew.rew_func = func; rew.rew_rsp = rsp; rew.rew_s = s; INIT_WORK_ONSTACK(&rew.rew_work, wait_rcu_exp_gp); schedule_work(&rew.rew_work);
It's also using schedule_work, so either the above is a false positive, or we've still a problem with synchronize_rcu_expedited, just a reproducible issue anymore after we stop running it under the struct_mutex.
Even synchronize_sched will wait on the system_wq if synchronize_rcu_expedited has been issued in parallel by some other code, it's just there's no check for it because it's not invoking flush_work to wait.
The deadlock happens if we flush_work() while holding any lock that may be taken by any of the workqueues that could be queued there. i915 makes sure to flush_work only if the struct_mutex was released (not my initial version) but we're not checking if any of the other system_wq workqueues could possibly taking a lock that may have been hold during the allocation that invoked reclaim, I suppose that is the problem left, but I don't see how flush_work is special about it, synchronize_rcu_expedited would still have the same issue no? (despite no lockdep warning)
I suspect this means synchronize_rcu_expedited() is not usable in reclaim context and lockdep should warn if PF_MEMALLOC is set when synchronize_rcu_expedited/synchronize_sched/synchronize_rcu are called.
Probably to fix this we should create a private workqueue for both RCU and i915 and stop sharing the system_wq with the rest of the system (and of course set WQ_MEM_RECLAIM in both workqueues). This makes sure when we call synchronize_rcu_expedited; flush_work from the shrinker, we won't risk waiting on other random work that may be taking locks that are hold by the code that invoked reclaim during an allocation.
The macro bug of waiting on system_wq 100% of the time while always holding the struct_mutex is gone, but we need to perfect this further and stop using the system_wq for RCU and i915 shrinker work.
Quoted 1 line
We do need it for
shrinker_countas well. If we just report 0 objects,
Yes the shrinker_count too.
Quoted 3 lines
the
shrinker_scancallback will be skipped, iirc. All we do need it for direct calls toi915_gem_shrink()which themselves may or may not be underneath thestruct_mutexat the time.
Yes.
Quoted 9 lines
I don't follow,
static inline struct
task_struct*__mutex_owner(struct mutex *lock){ return (struct task_struct *)(atomic_long_read(&lock->owner) & ~0x07); }The atomic read is equivalent to
READ_ONCE(). What's broken here? (I guess strict aliasing and pointer cast?)
That was an oversight, atomic64_read does READ_ONCE internally (as it should of course being an atomic read). I didn't recall it uses atomic_long_read.
Thanks,
Andrea
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/5] i915: flush gem obj freeing workqueues to add accuracy to the i915 shrinker
Quoted 24 lines · Andrea Arcangeli
Quoted 7 lines · Chris Wilson
Not getting hangs is a good sign, but lockdep doesn't like it:
[ 460.684901] WARNING: CPU: 1 PID: 172 at kernel/workqueue.c:2418 check_flush_dependency+0x92/0x130 [ 460.684924] workqueue: PF_MEMALLOC task 172(kworker/1:1H) is flushing !WQ_MEM_RECLAIM events:__i915_gem_free_work [i915]If I allocated the workqueue with
WQ_MEM_RELCAIM, it complains bitterly as well.So in
PF_MEMALLOCcontext we can't flush a workqueue with !WQ_MEM_RECLAIM.system_wq = alloc_workqueue("events", 0, 0);My point is
synchronize_rcu_expeditedwill still push its work in the samesystem_wqworkqueue.../* Marshall arguments & schedule the expedited grace period. */ rew.rew_func = func; rew.rew_rsp = rsp; rew.rew_s = s; INIT_WORK_ONSTACK(&rew.rew_work, wait_rcu_exp_gp); schedule_work(&rew.rew_work);
Quoted 4 lines
It's also using
schedule_work, so either the above is a false positive, or we've still a problem withsynchronize_rcu_expedited, just a reproducible issue anymore after we stop running it under thestruct_mutex.
We still do have a problem with using synchronize_rcu_expedited() from the shrinker as we maybe under someone else's mutex is that involved in its own RCU dance.
Quoted 4 lines
Even
synchronize_schedwill wait on thesystem_wqifsynchronize_rcu_expeditedhas been issued in parallel by some other code, it's just there's no check for it because it's not invokingflush_workto wait.
Right.
Quoted 10 lines
The deadlock happens if we
flush_work()while holding any lock that may be taken by any of the workqueues that could be queued there. i915 makes sure toflush_workonly if thestruct_mutexwas released (not my initial version) but we're not checking if any of the othersystem_wqworkqueues could possibly taking a lock that may have been hold during the allocation that invoked reclaim, I suppose that is the problem left, but I don't see howflush_workis special about it,synchronize_rcu_expeditedwould still have the same issue no? (despite no lockdep warning)
Quoted 4 lines
I suspect this means
synchronize_rcu_expedited()is not usable in reclaim context and lockdep should warn ifPF_MEMALLOCis set when synchronize_rcu_expedited/synchronize_sched/synchronize_rcu are called.
Yes.
Quoted 6 lines
Probably to fix this we should create a private workqueue for both RCU and i915 and stop sharing the
system_wqwith the rest of the system (and of course setWQ_MEM_RECLAIMin both workqueues). This makes sure when we callsynchronize_rcu_expedited;flush_workfrom the shrinker, we won't risk waiting on other random work that may be taking locks that are hold by the code that invoked reclaim during an allocation.
We simply do not need to do our own synchronize_rcu* -- it's only used to flush our slab frees on the off chance that (a) we have any and (b) we do manage to free a whole slab. It is not the bulk of the memory that we return to the system from the shrinker.
In the other thread, I stated that we should simply remove it. The kswapd reclaim path should try to reclaim RCU slabs (by doing a synhronize_sched or equivalent).
Quoted 3 lines
The macro bug of waiting on
system_wq100% of the time while always holding thestruct_mutexis gone, but we need to perfect this further and stop using thesystem_wqfor RCU and i915 shrinker work.
Agreed. My preference is to simply not do it and leave the dangling RCU to the core reclaim paths.
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 3/5 i915: initialize the free_list of the fencing atomic_helper
In reply to Andrea ArcangeliJust in case the llist model changes and NULL isn't valid initialization.
--- drivers/gpu/drm/i915/intel_display.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/i915/intel_display.c +1 -0
@@ -16630,6 +16630,7 @@ int intel_modeset_init(struct drm_device *dev) dev->mode_config.funcs = &intel_mode_funcs; +init_llist_head (&dev_priv->atomic_helper.free_list);INIT_WORK (&dev_priv->atomic_helper.free_work, intel_atomic_helper_free_state_worker);
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Chris Wilson
AppliedRe: [PATCH 3/5] i915: initialize the free_list of the fencing atomic_helper
Quoted 4 lines · Andrea Arcangeli
Just in case the llist model changes and NULL isn't valid initialization.
Signed-off-by Andrea Arcangeli <[email protected]>
Applied, thanks.
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 4/5 i915: schedule while freeing the lists of gem objects
In reply to Andrea ArcangeliAdd cond_resched().
--- drivers/gpu/drm/i915/i915_gem.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/gpu/drm/i915/i915_gem.c +4 -0
@@ -4205,6 +4205,8 @@ static void __i915_gem_free_objects(struct drm_i915_private *i915,GEM_BUG_ON (!RB_EMPTY_ROOT (&obj->vma_tree));list_del (&obj->global_link); + +cond_resched (); }intel_runtime_pm_put (i915);mutex_unlock (&i915->drm.struct_mutex);
@@ -4230,6 +4232,8 @@ static void __i915_gem_free_objects(struct drm_i915_private *i915,kfree (obj->bit_17);i915_gem_object_free (obj); + +cond_resched (); } }
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 5/5 i915: fence workqueue optimization
In reply to Andrea ArcangeliInsist to run llist_del_all() until the free_list is found empty, this may avoid having to schedule more workqueues.
--- drivers/gpu/drm/i915/intel_display.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_display.c +3 -3
@@ -14374,9 +14374,9 @@ static void intel_atomic_helper_free_state(struct drm_i915_private *dev_priv)struct intel_atomic_state *state, *next;struct llist_node *freed; - freed =llist_del_all (&dev_priv->atomic_helper.free_list); -llist_for_each_entry_safe (state, next, freed, freed) -drm_atomic_state_put (&state->base); +while ((freed =llist_del_all (&dev_priv->atomic_helper.free_list))) +llist_for_each_entry_safe (state, next, freed, freed) +drm_atomic_state_put (&state->base); }static void intel_atomic_helper_free_state_worker (struct work_struct *work)
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 5/5] i915: fence workqueue optimization
Quoted 2 lines · Andrea Arcangeli
Insist to run
llist_del_all()until thefree_listis found empty, this may avoid having to schedule more workqueues.
The work will already be scheduled (everytime we add the first element, the work is scheduled, and the scheduled bit is cleared before the work is executed). So we aren't saving the kworker from having to process another work, but we may make that having nothing to do. The question is whether we want to trap the kworker here, and presumably you will also want to add a cond_resched() between passes.
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 5/5] i915: fence workqueue optimization
Quoted 10 lines · Chris Wilson
Quoted 2 lines · Andrea Arcangeli
Insist to run
llist_del_all()until thefree_listis found empty, this may avoid having to schedule more workqueues.The work will already be scheduled (everytime we add the first element, the work is scheduled, and the scheduled bit is cleared before the work is executed). So we aren't saving the kworker from having to process another work, but we may make that having nothing to do. The question is whether we want to trap the kworker here, and presumably you will also want to add a
cond_resched()between passes.
Yes it is somewhat dubious in the two event only case, but it will save kworker in case of more events if there is a flood of llist_add. It just looked fast enough but it's up to you, it's a cmpxchg more for each intel_atomic_helper_free_state. If it's unlikely more work is added, it's better to drop it. Agree about cond_resched() if we keep it.
The same issue exists in __i915_gem_free_work, but I guess it's more likely there that by the time __i915_gem_free_objects returns the free_list isn't empty anymore because __i915_gem_free_objects has a longer runtime but then you may want to re-evaluate that too as it's slower for the two llist_add in a row case and only pays off from the third.
while ((freed = llist_del_all(&i915->mm.free_list))) __i915_gem_free_objects(i915, freed);
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Am 07.04.2017 01:23 schrieb Andrea Arcangeli:
Quoted 16 lines
I'm also getting kernel hangs every couple of days. For me it's still not fixed here in 4.11-rc5. It's hard to reproduce, the best reproducer is to build lineageos 14.1 on host while running LTP in a guest to stress the guest VM.
Initially I thought it was related to the fact I upgraded the xf86 intel driver just a few weeks ago (I deferred any upgrade of the userland intel driver since last July because of a regression that never got fixed and broke xterm for me). After I found a workaround for the userland regression (appended at the end for reference) I started getting kernel hangs but they are separate issues as far as I can tell.
It's not well tested so beware... (it survived a couple of builds and some VM reclaim but that's it).
Quoted 9 lines
The first patch 1/5 is the potential fix for the i915 kernel hang. The rest are incremental improvements.
And I've no great solution for when the shrinker was invoked with the
struct_mutexheld and and recurse on the lock. I don't think we can possibly wait in such case (other than flush work that the second patch does) but then practically it shouldn't be a big deal, the big RAM eater is unlikely to be i915 when the system is low on memory.
FWIW without having insight here, -rc6 seems to be good. No disturbing gpu hangs under load so far.
_______________________________________________
Intel-gfx mailing list [email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx