tracing: Stack tracing and rcu modification updates
Steven Rostedt
maintainercover tracing: Stack tracing and rcu modification updates
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace.git
for-next
Head SHA1: d54b6eeb553c89ed8d4c5a2ed73df374a45b9562
Paul E. McKenney (1):
rcu: Fix dyntick-idle tracing
Steven Rostedt (VMware) (6):
ftrace: Add use of synchronize_rcu_tasks() with dynamic trampolines
tracing: Replace the per_cpu() with __this_cpu*() in trace_stack.c
tracing: Add stack_tracer_disable/enable() functions
tracing: Rename trace_active to disable_stack_tracer and inline its modification rcu/tracing: Add rcu_disabled to denote when rcu_irq_enter() will not work
tracing: Make sure rcu_irq_enter() can work for trace_*_rcuidle() trace events
----
include/linux/ftrace.h | 38 ++++++++++++++++++++++++++++ include/linux/rcupdate.h | 5 ++++ include/linux/tracepoint.h | 19 ++++++++------ kernel/rcu/tree.c | 62 +++++++++++++++++++++++++++------------------- kernel/trace/Kconfig | 3 ++- kernel/trace/ftrace.c | 42 ++++++++++++++----------------- kernel/trace/trace_stack.c | 35 +++++++++++++------------- 7 files changed, 128 insertions(+), 76 deletions(-)
Steven Rostedt
maintainerPATCH 1/7 ftrace: Add use of synchronize_rcu_tasks() with dynamic trampolines
From: "Steven Rostedt (VMware)" <[email protected]>
The function tracer needs to be more careful than other subsystems when it comes to freeing data. Especially if that data is actually executable code. When a single function is traced, a trampoline can be dynamically allocated which is called to jump to the function trace callback. When the callback is no longer needed, the dynamic allocated trampoline needs to be freed. This is where the issues arise. The dynamically allocated trampoline must not be used again. As function tracing can trace all subsystems, including subsystems that are used to serialize aspects of freeing (namely RCU), it must take extra care when doing the freeing.
Before synchronize_rcu_tasks() was around, there was no way for the function tracer to know that nothing was using the dynamically allocated trampoline when CONFIG_PREEMPT was enabled. That's because a task could be indefinitely preempted while sitting on the trampoline. Now with synchronize_rcu_tasks(), it will wait till all tasks have either voluntarily scheduled (not on the trampoline) or goes into userspace (not on the trampoline). Then it is safe to free the trampoline even with CONFIG_PREEMPT set.
--- kernel/trace/Kconfig | 3 ++- kernel/trace/ftrace.c | 42 ++++++++++++++++++------------------------ 2 files changed, 20 insertions(+), 25 deletions(-)
kernel/trace/Kconfig +2 -1
@@ -134,7 +134,8 @@ config FUNCTION_TRACER select KALLSYMS select GENERIC_TRACER select CONTEXT_SWITCH_TRACER - select GLOB + select GLOB + select TASKS_RCU if PREEMPT help Enable the kernel to trace every kernel function. This is done by using a compiler feature to insert a small, 5-byte No-Operation
kernel/trace/ftrace.c +18 -24
58 lines not on this page · raw message
Signature · 1 line
2.10.2
Steven Rostedt
maintainerPATCH 2/7 tracing: Replace the per_cpu() with __this_cpu*() in trace_stack.c
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
The updates to the trace_active per cpu variable can be updated with the __this_cpu_*() functions as it only gets updated on the CPU that the variable is on.
Thanks to Paul McKenney for suggesting __this_cpu_* instead of this_cpu_*.
--- kernel/trace/trace_stack.c | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-)
kernel/trace/trace_stack.c +7 -16
@@ -207,13 +207,12 @@ stack_trace_call(unsigned long ip, unsigned long parent_ip, struct ftrace_ops *op, struct pt_regs *pt_regs) { unsigned long stack; -int cpu;preempt_disable_notrace (); - cpu =raw_smp_processor_id ();/* no atomic needed, we only modify this variable by this cpu */ -if (per_cpu (trace_active, cpu)++ !=0 ) +__this_cpu_inc (trace_active); +if (__this_cpu_read (trace_active) !=1 ) goto out; ip +=MCOUNT_INSN_SIZE ;
@@ -221,7 +220,7 @@ stack_trace_call(unsigned long ip, unsigned long parent_ip,check_stack (ip, &stack); out: -per_cpu (trace_active, cpu)--; +__this_cpu_dec (trace_active);/* prevent recursion in schedule */ preempt_enable_notrace (); }
@@ -253,7 +252,6 @@ stack_max_size_write(struct file *filp, const char __user *ubuf,long *ptr = filp->private_data;unsigned long val, flags;int ret; -int cpu; ret =kstrtoul_from_user (ubuf, count,10 , &val);if (ret)
@@ -266,14 +264,13 @@ stack_max_size_write(struct file *filp, const char __user *ubuf,* we will cause circular lock, so we also need to increase * the percpu trace_active here. */ - cpu =smp_processor_id (); -per_cpu (trace_active, cpu)++; +__this_cpu_inc (trace_active);arch_spin_lock (&stack_trace_max_lock); *ptr = val;arch_spin_unlock (&stack_trace_max_lock); -per_cpu (trace_active, cpu)--; +__this_cpu_dec (trace_active);local_irq_restore (flags);return count;
@@ -307,12 +304,9 @@ t_next(struct seq_file *m, void *v, loff_t *pos)static void *t_start (struct seq_file *m,loff_t *pos) { -int cpu; -local_irq_disable (); - cpu =smp_processor_id (); -per_cpu (trace_active, cpu)++; +__this_cpu_inc (trace_active);arch_spin_lock (&stack_trace_max_lock);
@@ -324,12 +318,9 @@ static void *t_start(struct seq_file *m, loff_t *pos)static void t_stop (struct seq_file *m,void *p) { -int cpu; -arch_spin_unlock (&stack_trace_max_lock); - cpu =smp_processor_id (); -per_cpu (trace_active, cpu)--; +__this_cpu_dec (trace_active);local_irq_enable (); }
Signature · 1 line
2.10.2
Steven Rostedt
maintainerPATCH 3/7 tracing: Add stack_tracer_disable/enable() functions
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
There are certain parts of the kernel that cannot let stack tracing proceed (namely in RCU), because the stack tracer uses RCU, and parts of RCU internals cannot handle having RCU read side locks taken.
Add stack_tracer_disable() and stack_tracer_enable() functions to let RCU stop stack tracing on the current CPU when it is in those critical sections.
--- include/linux/ftrace.h | 6 ++++++ kernel/trace/trace_stack.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+)
include/linux/ftrace.h +6 -0
@@ -286,6 +286,12 @@ int stack_trace_sysctl(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); + +void stack_tracer_disable (void ); +void stack_tracer_enable (void ); +#else +static inline void stack_tracer_disable (void ) { } +static inline void stack_tracer_enable (void ) { }#endif struct ftrace_func_command {
kernel/trace/trace_stack.c +32 -0
@@ -41,6 +41,38 @@ static DEFINE_MUTEX(stack_sysctl_mutex);int stack_tracer_enabled;static int last_stack_tracer_enabled; +/** +* stack_tracer_disable - temporarily disable the stack tracer +* +* There's a few locations (namely in RCU) where stack tracing +* cannot be executed. This function is used to disable stack +* tracing during those critical sections. +* +* This function must be called with preemption or interrupts +* disabled and stack_tracer_enable() must be called shortly after +* while preemption or interrupts are still disabled. +*/ +void stack_tracer_disable (void ) +{ +/* Preemption or interupts must be disabled */ +if (IS_ENABLED (CONFIG_PREEMPT_DEBUG )) +WARN_ON_ONCE (!preempt_count () || !irqs_disabled ()); +this_cpu_inc (trace_active); +} + +/** +* stack_tracer_enable - re-enable the stack tracer +* +* After stack_tracer_disable() is called, stack_tracer_enable() +* must be called shortly afterward. +*/ +void stack_tracer_enable (void ) +{ +if (IS_ENABLED (CONFIG_PREEMPT_DEBUG )) +WARN_ON_ONCE (!preempt_count () || !irqs_disabled ()); +this_cpu_dec (trace_active); +} +void stack_trace_print (void ) {long i;
Signature · 1 line
2.10.2
Steven Rostedt
maintainerPATCH 4/7 tracing: Rename trace_active to disable_stack_tracer and inline its modification
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
In order to eliminate a function call, make "trace_active" into "disable_stack_tracer" and convert stack_tracer_disable() and friends into static inline functions.
--- include/linux/ftrace.h | 36 +++++++++++++++++++++++++++++++-- kernel/trace/trace_stack.c | 50 +++++++++------------------------------------- 2 files changed, 43 insertions(+), 43 deletions(-)
include/linux/ftrace.h +34 -2
@@ -287,8 +287,40 @@ stack_trace_sysctl(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); -void stack_tracer_disable (void ); -void stack_tracer_enable (void ); +/* DO NOT MODIFY THIS VARIABLE DIRECTLY! */ +DECLARE_PER_CPU (int, disable_stack_tracer); + +/** +* stack_tracer_disable - temporarily disable the stack tracer +* +* There's a few locations (namely in RCU) where stack tracing +* cannot be executed. This function is used to disable stack +* tracing during those critical sections. +* +* This function must be called with preemption or interrupts +* disabled and stack_tracer_enable() must be called shortly after +* while preemption or interrupts are still disabled. +*/ +static inline void stack_tracer_disable (void ) +{ +/* Preemption or interupts must be disabled */ +if (IS_ENABLED (CONFIG_PREEMPT_DEBUG )) +WARN_ON_ONCE (!preempt_count () || !irqs_disabled ()); +this_cpu_inc (disable_stack_tracer); +} + +/** +* stack_tracer_enable - re-enable the stack tracer +* +* After stack_tracer_disable() is called, stack_tracer_enable() +* must be called shortly afterward. +*/ +static inline void stack_tracer_enable (void ) +{ +if (IS_ENABLED (CONFIG_PREEMPT_DEBUG )) +WARN_ON_ONCE (!preempt_count () || !irqs_disabled ()); +this_cpu_dec (disable_stack_tracer); +}#else static inline void stack_tracer_disable (void ) { }static inline void stack_tracer_enable (void ) { }
kernel/trace/trace_stack.c +9 -41
97 lines not on this page · raw message
Signature · 1 line
2.10.2
Re: [for-next][PATCH 4/7] tracing: Rename trace_active to disable_stack_tracer and inline its modification
Hi Steven,
I just found this patch in linux-next commit 8aaf1ee70e19 with scripts/checkkconfigsymbols.py complaining about an undefined CONFIG_PREEMPT_DEBUG (see below). I guess it's just a typo, since there is a symbol named DEBUG_PREEMPT.
If you want to, I can send a trivial patch to rename both references.
Best regards,
Valentin
Quoted 31 lines · Steven Rostedt
From: "Steven Rostedt (VMware)" <[email protected]>
In order to eliminate a function call, make "
trace_active" into "disable_stack_tracer" and convertstack_tracer_disable()and friends into static inline functions.Acked-by Paul E. McKenney <[email protected]>Signed-off-by Steven Rostedt (VMware) <[email protected]>--- include/linux/ftrace.h | 36 +++++++++++++++++++++++++++++++-- kernel/trace/trace_stack.c | 50 +++++++++------------------------------------- 2 files changed, 43 insertions(+), 43 deletions(-)include/linux/ftrace.h +8
-2@@ -287,8 +287,40 @@ stack_trace_sysctl(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); -void stack_tracer_disable (void ); -void stack_tracer_enable (void ); +/* DO NOT MODIFY THIS VARIABLE DIRECTLY! */ +DECLARE_PER_CPU (int, disable_stack_tracer); + +/** +* stack_tracer_disable - temporarily disable the stack tracer +* +* There's a few locations (namely in RCU) where stack tracing +* cannot be executed. This function is used to disable stack
include/linux/ftrace.h stack_trace_sysctl(struct ctl_table *table, int write, · line 307
Quoted 10 lines
include/linux/ftrace.h +10
-0+* tracing during those critical sections. +* +* This function must be called with preemption or interrupts +* disabled and stack_tracer_enable() must be called shortly after +* while preemption or interrupts are still disabled. +*/ +static inline void stack_tracer_disable (void ) +{ +/* Preemption or interupts must be disabled */ +if (IS_ENABLED (CONFIG_PREEMPT_DEBUG ))
^ undefined
include/linux/ftrace.h stack_trace_sysctl(struct ctl_table *table, int write, · line 320
Quoted 13 lines
include/linux/ftrace.h +13
-0+WARN_ON_ONCE (!preempt_count () || !irqs_disabled ()); +this_cpu_inc (disable_stack_tracer); +} + +/** +* stack_tracer_enable - re-enable the stack tracer +* +* After stack_tracer_disable() is called, stack_tracer_enable() +* must be called shortly afterward. +*/ +static inline void stack_tracer_enable (void ) +{ +if (IS_ENABLED (CONFIG_PREEMPT_DEBUG ))
^ undefined
Quoted 117 lines
include/linux/ftrace.h +3
-0+WARN_ON_ONCE (!preempt_count () || !irqs_disabled ()); + this_cpu_dec(disable_stack_tracer); +}#else static inline void stack_tracer_disable (void ) { }static inline void stack_tracer_enable (void ) { }kernel/trace/trace_stack.c +9
-41@@ -35,44 +35,12 @@ unsigned long stack_trace_max_size;arch_spinlock_t stack_trace_max_lock = (arch_spinlock_t )__ARCH_SPIN_LOCK_UNLOCKED; -static DEFINE_PER_CPU(int, trace_active); +DEFINE_PER_CPU (int, disable_stack_tracer);static DEFINE_MUTEX (stack_sysctl_mutex);int stack_tracer_enabled;static int last_stack_tracer_enabled; -/** -* stack_tracer_disable - temporarily disable the stack tracer -* -* There's a few locations (namely in RCU) where stack tracing -* cannot be executed. This function is used to disable stack -* tracing during those critical sections. -* -* This function must be called with preemption or interrupts -* disabled and stack_tracer_enable() must be called shortly after -* while preemption or interrupts are still disabled. -*/ -void stack_tracer_disable (void ) -{ -/* Preemption or interupts must be disabled */ -if (IS_ENABLED (CONFIG_PREEMPT_DEBUG )) -WARN_ON_ONCE (!preempt_count () || !irqs_disabled ()); -this_cpu_inc (trace_active); -} - -/** -* stack_tracer_enable - re-enable the stack tracer -* -* After stack_tracer_disable() is called, stack_tracer_enable() -* must be called shortly afterward. -*/ -void stack_tracer_enable (void ) -{ -if (IS_ENABLED (CONFIG_PREEMPT_DEBUG )) -WARN_ON_ONCE (!preempt_count () || !irqs_disabled ()); -this_cpu_dec (trace_active); -} -void stack_trace_print (void ) {long i;@@ -243,8 +211,8 @@ stack_trace_call(unsigned long ip, unsigned long parent_ip,preempt_disable_notrace ();/* no atomic needed, we only modify this variable by this cpu */ -__this_cpu_inc (trace_active); -if (__this_cpu_read (trace_active) !=1 ) +__this_cpu_inc (disable_stack_tracer); +if (__this_cpu_read (disable_stack_tracer) !=1 ) goto out; ip +=MCOUNT_INSN_SIZE ;@@ -252,7 +220,7 @@ stack_trace_call(unsigned long ip, unsigned long parent_ip,check_stack (ip, &stack); out: -__this_cpu_dec (trace_active); +__this_cpu_dec (disable_stack_tracer);/* prevent recursion in schedule */ preempt_enable_notrace (); }@@ -294,15 +262,15 @@ stack_max_size_write(struct file *filp, const char __user *ubuf,/* * In case we trace inside arch_spin_lock() or after (NMI), * we will cause circular lock, so we also need to increase -* the percpu trace_active here. +* the percpu disable_stack_tracer here. */ -__this_cpu_inc (trace_active); +__this_cpu_inc (disable_stack_tracer);arch_spin_lock (&stack_trace_max_lock); *ptr = val;arch_spin_unlock (&stack_trace_max_lock); -__this_cpu_dec (trace_active); +__this_cpu_dec (disable_stack_tracer);local_irq_restore (flags);return count;@@ -338,7 +306,7 @@ static void *t_start(struct seq_file *m, loff_t *pos) {local_irq_disable (); -__this_cpu_inc (trace_active); +__this_cpu_inc (disable_stack_tracer);arch_spin_lock (&stack_trace_max_lock);@@ -352,7 +320,7 @@ static void t_stop(struct seq_file *m, void *p) {arch_spin_unlock (&stack_trace_max_lock); -__this_cpu_dec (trace_active); +__this_cpu_dec (disable_stack_tracer);local_irq_enable (); }Signature · 1 line
2.10.2
Steven Rostedt
maintainerRe: [for-next][PATCH 4/7] tracing: Rename trace_active to disable_stack_tracer and inline its modification
Quoted 8 lines · On Thu, 13 Apr 2017 09:58:17 +0200 Valentin Rothberg…
Hi Steven,
I just found this patch in linux-next commit
8aaf1ee70e19withscripts/checkkconfigsymbols.pycomplaining about an undefinedCONFIG_PREEMPT_DEBUG(see below). I guess it's just a typo, since there is a symbol namedDEBUG_PREEMPT.If you want to, I can send a trivial patch to rename both references.
Please do!
Thanks for catching this.
-- Steve
Steven Rostedt
maintainerPATCH 5/7 rcu: Fix dyntick-idle tracing
In reply to Steven RostedtFrom: "Paul E. McKenney" <[email protected]>
The tracing subsystem started using rcu_irq_entry() and rcu_irq_exit() (with my blessing) to allow the current _rcuidle alternative tracepoint name to be dispensed with while still maintaining good performance. Unfortunately, this causes RCU's dyntick-idle entry code's tracing to appear to RCU like an interrupt that occurs where RCU is not designed to handle interrupts.
This commit fixes this problem by moving the zeroing of ->dynticks_nesting after the offending trace_rcu_dyntick() statement, which narrows the window of vulnerability to a pair of adjacent statements that are now marked with comments to that effect.
--- kernel/rcu/tree.c | 48 +++++++++++++++++++++++------------------------- 1 file changed, 23 insertions(+), 25 deletions(-)
kernel/rcu/tree.c +23 -25
@@ -57,6 +57,7 @@#include <linux/random.h> #include <linux/trace_events.h> #include <linux/suspend.h> +#include <linux/ftrace.h> #include "tree.h" #include "rcu.h"
@@ -771,25 +772,24 @@ cpu_needs_another_gp(struct rcu_state *rsp, struct rcu_data *rdp) }/* -* rcu_eqs_enter_common - current CPU is moving towards extended quiescent state +* rcu_eqs_enter_common - current CPU is entering an extended quiescent state * -* If the new value of the ->dynticks_nesting counter now is zero, -* we really have entered idle, and must do the appropriate accounting. -* The caller must have disabled interrupts. +* Enter idle, doing appropriate accounting. The caller must have +* disabled interrupts. */ -static void rcu_eqs_enter_common (long long oldval,bool user) +static void rcu_eqs_enter_common (bool user) {struct rcu_state *rsp;struct rcu_data *rdp; - RCU_TRACE(struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);) +struct rcu_dynticks *rdtp =this_cpu_ptr (&rcu_dynticks); -trace_rcu_dyntick (TPS ("Start" ), oldval, rdtp->dynticks_nesting); +trace_rcu_dyntick (TPS ("Start" ), rdtp->dynticks_nesting,0 );if (IS_ENABLED (CONFIG_RCU_EQS_DEBUG ) && !user && !is_idle_task (current)) {struct task_struct *idle__maybe_unused =idle_task (smp_processor_id ()); -trace_rcu_dyntick (TPS ("Error on entry: not idle task" ), oldval,0 ); +trace_rcu_dyntick (TPS ("Error on entry: not idle task" ), rdtp->dynticks_nesting,0 );rcu_ftrace_dump (DUMP_ORIG ); WARN_ONCE(1, "Current pid: %d comm: %s / Idle pid: %d comm: %s", current->pid, current->comm,
@@ -800,7 +800,10 @@ static void rcu_eqs_enter_common(long long oldval, bool user)do_nocb_deferred_wakeup (rdp); }rcu_prepare_for_idle (); -rcu_dynticks_eqs_enter (); +stack_tracer_disable (); + rdtp->dynticks_nesting =0 ;/* Breaks tracing momentarily. */ +rcu_dynticks_eqs_enter ();/* After this, tracing works again. */ +stack_tracer_enable ();rcu_dynticks_task_enter ();/*
@@ -821,19 +824,15 @@ static void rcu_eqs_enter_common(long long oldval, bool user)*/ static void rcu_eqs_enter (bool user) { -long long oldval;struct rcu_dynticks *rdtp; rdtp =this_cpu_ptr (&rcu_dynticks); - oldval = rdtp->dynticks_nesting;WARN_ON_ONCE (IS_ENABLED (CONFIG_RCU_EQS_DEBUG ) && - (oldval &DYNTICK_TASK_NEST_MASK ) ==0 ); -if ((oldval &DYNTICK_TASK_NEST_MASK ) ==DYNTICK_TASK_NEST_VALUE ) { - rdtp->dynticks_nesting =0 ; -rcu_eqs_enter_common (oldval, user); - }else { + (rdtp->dynticks_nesting &DYNTICK_TASK_NEST_MASK ) ==0 ); +if ((rdtp->dynticks_nesting &DYNTICK_TASK_NEST_MASK ) ==DYNTICK_TASK_NEST_VALUE ) +rcu_eqs_enter_common (user); +else rdtp->dynticks_nesting -=DYNTICK_TASK_NEST_VALUE ; - } }/**
@@ -892,19 +891,18 @@ void rcu_user_enter(void)*/ void rcu_irq_exit (void ) { -long long oldval;struct rcu_dynticks *rdtp;RCU_LOCKDEP_WARN (!irqs_disabled (),"rcu_irq_exit() invoked with irqs enabled!!!" ); rdtp =this_cpu_ptr (&rcu_dynticks); - oldval = rdtp->dynticks_nesting; - rdtp->dynticks_nesting--;WARN_ON_ONCE (IS_ENABLED (CONFIG_RCU_EQS_DEBUG ) && - rdtp->dynticks_nesting <0 ); -if (rdtp->dynticks_nesting) -trace_rcu_dyntick (TPS ("--=" ), oldval, rdtp->dynticks_nesting); -else -rcu_eqs_enter_common (oldval, true); + rdtp->dynticks_nesting <1 ); +if (rdtp->dynticks_nesting <=1 ) { +rcu_eqs_enter_common (true); + }else { +trace_rcu_dyntick (TPS ("--=" ), rdtp->dynticks_nesting, rdtp->dynticks_nesting -1 ); + rdtp->dynticks_nesting--; + }rcu_sysidle_enter (1 ); }
Signature · 1 line
2.10.2
Steven Rostedt
maintainerPATCH 6/7 rcu/tracing: Add rcu_disabled to denote when rcu_irq_enter() will not work
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
Tracing uses rcu_irq_enter() as a way to make sure that RCU is watching when it needs to use rcu_read_lock() and friends. This is because tracing can happen as RCU is about to enter user space, or about to go idle, and RCU does not watch for RCU read side critical sections as it makes the transition.
There is a small location within the RCU infrastructure that rcu_irq_enter() itself will not work. If tracing were to occur in that section it will break if it tries to use rcu_irq_enter().
Originally, this happens with the stack_tracer, because it will call save_stack_trace when it encounters stack usage that is greater than any stack usage it had encountered previously. There was a case where that happened in the RCU section where rcu_irq_enter() did not work, and lockdep complained loudly about it. To fix it, stack tracing added a call to be disabled and RCU would disable stack tracing during the critical section that rcu_irq_enter() was inoperable. This solution worked, but there are other cases that use rcu_irq_enter() and it would be a good idea to let RCU give a way to let others know that rcu_irq_enter() will not work. For example, in trace events.
Another helpful aspect of this change is that it also moves the per cpu variable called in the RCU critical section into a cache locale along with other RCU per cpu variables used in that same location.
I'm keeping the stack_trace_disable() code, as that still could be used in the future by places that really need to disable it. And since it's only a static inline, it wont take up any kernel text if it is not used.
--- include/linux/rcupdate.h | 5 +++++ kernel/rcu/tree.c | 18 ++++++++++++++++-- kernel/trace/trace_stack.c | 8 ++++++++ 3 files changed, 29 insertions(+), 2 deletions(-)
include/linux/rcupdate.h +5 -0
@@ -97,6 +97,7 @@ void do_trace_rcu_torture_read(const char *rcutorturename,unsigned long secs, unsigned long c_old, unsigned long c); +bool rcu_irq_enter_disabled (void );#else static inline void rcutorture_get_gp_data(enum rcutorture_type test_type, int *flags,
@@ -113,6 +114,10 @@ static inline void rcutorture_record_test_transition(void)static inline void rcutorture_record_progress (unsigned long vernum) { } +static inline bool rcu_irq_enter_disabled (void ) +{ +return false; +}#ifdef CONFIG_RCU_TRACE void do_trace_rcu_torture_read(const char *rcutorturename, struct rcu_head *rhp,
kernel/rcu/tree.c +16 -2
@@ -285,6 +285,20 @@ static DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = { };/* +* There's a few places, currently just in the tracing infrastructure, +* that uses rcu_irq_enter() to make sure RCU is watching. But there's +* a small location where that will not even work. In those cases +* rcu_irq_enter_disabled() needs to be checked to make sure rcu_irq_enter() +* can be called. +*/ +static DEFINE_PER_CPU(bool, disable_rcu_irq_enter); + +bool rcu_irq_enter_disabled (void ) +{ +return this_cpu_read (disable_rcu_irq_enter); +} + +/* * Record entry into an extended quiescent state. This is only to be * called when not already in an extended quiescent state. */
@@ -800,10 +814,10 @@ static void rcu_eqs_enter_common(bool user)do_nocb_deferred_wakeup (rdp); }rcu_prepare_for_idle (); -stack_tracer_disable (); +__this_cpu_inc (disable_rcu_irq_enter); rdtp->dynticks_nesting =0 ;/* Breaks tracing momentarily. */ rcu_dynticks_eqs_enter ();/* After this, tracing works again. */ -stack_tracer_enable (); +__this_cpu_dec (disable_rcu_irq_enter);rcu_dynticks_task_enter ();/*
kernel/trace/trace_stack.c +8 -0
@@ -96,6 +96,14 @@ check_stack(unsigned long ip, unsigned long *stack)if (in_nmi ())return ; +/* +* There's a slight chance that we are tracing inside the +* RCU infrastructure, and rcu_irq_enter() will not work +* as expected. +*/ +if (unlikely (rcu_irq_enter_disabled ())) +return ; +local_irq_save (flags);arch_spin_lock (&stack_trace_max_lock);
Signature · 1 line
2.10.2
Steven Rostedt
maintainerPATCH 7/7 tracing: Make sure rcu_irq_enter() can work for trace_*_rcuidle() trace events
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
Stack tracing discovered that there's a small location inside the RCU infrastructure where calling rcu_irq_enter() does not work. As trace events use rcu_irq_enter() it must make sure that it is functionable. A check against rcu_irq_enter_disabled() is added with a WARN_ON_ONCE() as no trace event should ever be used in that part of RCU. If the warning is triggered, then the trace event is ignored.
Restructure the __DO_TRACE() a bit to get rid of the prercu and postrcu, and just have an rcucheck that does the work from within the _DO_TRACE() macro. gcc optimization will compile out the rcucheck=0 case.
--- include/linux/tracepoint.h | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)
include/linux/tracepoint.h +11 -8
@@ -128,7 +128,7 @@ extern void syscall_unregfunc(void);* as "(void *, void)". The DECLARE_TRACE_NOARGS() will pass in just * "void *data", where as the DECLARE_TRACE() will pass in "void *data, proto". */ -#define __DO_TRACE (tp, proto, args, cond, prercu, postrcu) \ +#define __DO_TRACE (tp, proto, args, cond, rcucheck) \ do { \ struct tracepoint_func *it_func_ptr; \ void *it_func; \
@@ -136,7 +136,11 @@ extern void syscall_unregfunc(void); \if (!(cond)) \return ; \ - prercu; \ +if (rcucheck) { \ +if (WARN_ON_ONCE (rcu_irq_enter_disabled ())) \ +return ; \ +rcu_irq_enter_irqson (); \ + } \rcu_read_lock_sched_notrace (); \ it_func_ptr =rcu_dereference_sched ((tp)->funcs); \if (it_func_ptr) { \
@@ -147,20 +151,19 @@ extern void syscall_unregfunc(void); }while ((++it_func_ptr)->func); \ } \rcu_read_unlock_sched_notrace (); \ - postrcu; \ +if (rcucheck) \ +rcu_irq_exit_irqson (); \ } while (0)#ifndef MODULE -#define __DECLARE_TRACE_RCU (name, proto, args, cond, data_proto, data_args) \ +#define __DECLARE_TRACE_RCU (name, proto, args, cond, data_proto, data_args) \ static inline void trace_##name##_rcuidle(proto) \ { \ if (static_key_false(&__tracepoint_##name.key)) \ __DO_TRACE(&__tracepoint_##name, \ TP_PROTO(data_proto), \ TP_ARGS(data_args), \ - TP_CONDITION(cond), \ - rcu_irq_enter_irqson(), \ - rcu_irq_exit_irqson()); \ + TP_CONDITION(cond), 1); \ }#else #define __DECLARE_TRACE_RCU (name, proto, args, cond, data_proto, data_args)
@@ -186,7 +189,7 @@ extern void syscall_unregfunc(void); __DO_TRACE(&__tracepoint_##name, \ TP_PROTO(data_proto), \ TP_ARGS(data_args), \ - TP_CONDITION(cond),,); \ + TP_CONDITION(cond), 0); \ if (IS_ENABLED(CONFIG_LOCKDEP) && (cond)) { \ rcu_read_lock_sched_notrace(); \ rcu_dereference_sched(__tracepoint_##name.funcs);\
Signature · 1 line
2.10.2