staging/media: make atomisp vlv2_plat_clock explicitly non-modular
Subsystems (4)
PATCH 1/1 staging/media: make atomisp vlv2_plat_clock explicitly non-modular
The Makefile / Kconfig currently controlling compilation of this code is:
clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += vlv2_plat_clock.o
atomisp/Kconfig:menuconfig INTEL_ATOMISP
atomisp/Kconfig: bool "Enable support to Intel MIPI camera drivers"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only.
Since module_init was already not in use by this driver, the init ordering remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments.
--- .../media/atomisp/platform/clock/vlv2_plat_clock.c | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-)
drivers/staging/media/atomisp/platform/clock/vlv2_plat_clock.c +1 -20
@@ -21,7 +21,7 @@#include <linux/err.h> #include <linux/io.h> -#include <linux/module.h> +#include <linux/init.h> #include <linux/platform_device.h> #include "../../include/linux/vlv2_plat_clock.h"
@@ -205,18 +205,10 @@ static int vlv2_plat_clk_probe(struct platform_device *pdev)return 0 ; } -static int vlv2_plat_clk_remove (struct platform_device *pdev) -{ -iounmap (pmc_base); - pmc_base =NULL ; -return 0 ; -} -static const struct platform_device_id vlv2_plat_clk_id[] = { {"vlv2_plat_clk" ,0 }, {} }; -MODULE_DEVICE_TABLE (platform, vlv2_plat_clk_id);static int vlv2_resume (struct device *device) {
@@ -241,7 +233,6 @@ static const struct dev_pm_ops vlv2_pm_ops = {static struct platform_driver vlv2_plat_clk_driver = { .probe = vlv2_plat_clk_probe, - .remove = vlv2_plat_clk_remove, .id_table = vlv2_plat_clk_id, .driver = { .name ="vlv2_plat_clk" ,
@@ -254,13 +245,3 @@ static int __init vlv2_plat_clk_init(void)return platform_driver_register (&vlv2_plat_clk_driver); }arch_initcall (vlv2_plat_clk_init); - -static void __exit vlv2_plat_clk_exit(void) -{ -platform_driver_unregister (&vlv2_plat_clk_driver); -} -module_exit (vlv2_plat_clk_exit); - -MODULE_AUTHOR ("Asutosh Pathak <[email protected]>" ); -MODULE_DESCRIPTION ("Intel VLV2 platform clock driver" ); -MODULE_LICENSE ("GPL v2" );
Signature · 1 line
2.11.0
Greg Kroah-Hartman
maintainerQuoted 20 lines · Paul Gortmaker
The
Makefile/Kconfigcurrently controlling compilation of this code is:clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += vlv2_plat_clock.o
atomisp/Kconfig:menuconfig
INTEL_ATOMISP
atomisp/Kconfig: bool "Enable support to Intel MIPI camera drivers"...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only.
Since
module_initwas already not in use by this driver, the init ordering remains unchanged with this commit.Also note that
MODULE_DEVICE_TABLEis a no-op for non-modular code.We also delete the
MODULE_LICENSEtag etc. since all that information is already contained at the top of the file in the comments.
Quoted 6 lines
Cc Mauro Carvalho Chehab <[email protected]>Cc Greg Kroah-Hartman <[email protected]>Cc Alan Cox <[email protected]>Signed-off-by Paul Gortmaker <[email protected]>
I'm pretty sure we want this code to be built as a module, so maybe a Kconfig change would resolve the issue instead?
Alan, any thoughts?
thanks,
greg k-h
Quoted 9 lines · [Re: [PATCH] staging/media: make atomisp vlv2_plat_clock explicitly…
Quoted 8 lines · Paul Gortmaker
The
Makefile/Kconfigcurrently controlling compilation of this code is:clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += vlv2_plat_clock.o
atomisp/Kconfig:menuconfig
INTEL_ATOMISP
atomisp/Kconfig: bool "Enable support to Intel MIPI camera drivers"...meaning that it currently is not being built as a module by anyone.
[...]
Quoted 2 lines
I'm pretty sure we want this code to be built as a module, so maybe a
Kconfigchange would resolve the issue instead?
As always, I'm good with things being moved to tristate if there is a use case for it. I will note that in this case however, that the above Kconfig option is not specific to this file/driver. It is controlling the inclusion of several dirs/files, and so a more fine grained Kconfig may be required if some are to be built-in and some are to be tristate...
P.
~/git/linux-head/drivers/staging/media/atomisp$ git grep 'obj.*INTEL_ATOMISP' Makefile:obj-$(CONFIG_INTEL_ATOMISP) += pci/ Makefile:obj-$(CONFIG_INTEL_ATOMISP) += i2c/ Makefile:obj-$(CONFIG_INTEL_ATOMISP) += platform/ platform/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += clock/ platform/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += intel-mid/
platform/clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += vlv2_plat_clock.o
platform/clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += platform_vlv2_plat_clk.o
platform/intel-mid/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += intel_mid_pcihelpers.o platform/intel-mid/Makefile:obj-$(CONFIG_INTEL_ATOMISP) += atomisp_gmin_platform.o
Quoted 6 lines
Alan, any thoughts?
thanks,
greg k-h
Quoted 4 lines
I'm pretty sure we want this code to be built as a module, so maybe a
Kconfigchange would resolve the issue instead?Alan, any thoughts?
It's a tiny chunk of platform helper code. It probably ultimately belongs in arch/x86 somewhere or folded into the driver. At the moment it won't build modular.
I'm fine with the change, it strips out more pointless code so helps see what tiny bits of code in there are actually used for anything real.
Alan