multi_v7_defconfig: make Rockchip usb2-phy built-in
Subsystems (2)
Heiko Stuebner
maintainerPATCH 1/1 multi_v7_defconfig: make Rockchip usb2-phy built-in
The phy is necessary for the dwc2 controllers driving the usb ports on all arm32 Rockchip socs. Both the dwc2 as well as usb downstream drivers (mass-storage as well as usb networking) are already built-in, so only the phy is missing to allow booting from usb-devices without to much hassle.
---
Ideally to be applied directly to some armsoc defconfig branch.
arch/arm/configs/multi_v7_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/configs/multi_v7_defconfig +1 -1
@@ -884,7 +884,7 @@ CONFIG_TI_PIPE3=y CONFIG_PHY_BERLIN_USB=y CONFIG_PHY_BERLIN_SATA=y CONFIG_PHY_ROCKCHIP_DP=m -CONFIG_PHY_ROCKCHIP_USB=m +CONFIG_PHY_ROCKCHIP_USB=y CONFIG_PHY_QCOM_APQ8064_SATA=m CONFIG_PHY_MIPHY28LP=y CONFIG_PHY_RCAR_GEN2=m
Signature · 1 line
2.11.0
Olof Johansson
AppliedPATCH 1/1 multi_v7_defconfig: make Rockchip usb2-phy built-in
Quoted 9 lines · Heiko Stuebner
The phy is necessary for the dwc2 controllers driving the usb ports on all arm32 Rockchip socs. Both the dwc2 as well as usb downstream drivers (mass-storage as well as usb networking) are already built-in, so only the phy is missing to allow booting from usb-devices without to much hassle.
Signed-off-by Heiko Stuebner <[email protected]>---
Ideally to be applied directly to some armsoc defconfig branch.
Merged, thanks!
-Olof