Bluetooth: Add support for Intel Bluetooth device 9460/9560 [8087:0aaa]

PATCH In review Tedd Ho-Jeong An 2 participants 2 messages May 1, 2017 – May 2, 2017 Bluetooth drivers

lore

Share & tools

lore

Tedd Ho-Jeong An

author

2017-05-01 20:35 UTC #0 lore raw

PATCH 1/1 Bluetooth: Add support for Intel Bluetooth device 9460/9560 [8087:0aaa]

From: Tedd Ho-Jeong An <[email protected]>

This patch adds support for Intel Bluetooth device 9460/9560 also known as Jefferson Peak (JfP). The firmware downloading mechanism is same as previous generation. So include the new USB product identifier and whitelist the hardware variant.

T:  Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#=  5 Spd=12   MxCh= 0
D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0aaa Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Bootloader version:
< HCI Command: Intel Read Version (0x3f|0x0005) plen 0

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 13

      Intel Read Version (0x3f|0x0005) ncmd 32
        Status: Success (0x00)
        Hardware platform: 0x37
        Hardware variant: 0x11
        Hardware revision: 0.0
        Firmware variant: 0x06
        Firmware revision: 0.1
        Firmware build: 42-52.2015
        Firmware patch: 0

Signed-off-by Tedd Ho-Jeong An <[email protected]>

---
 drivers/bluetooth/btusb.c | 4 ++++
 1 file changed, 4 insertions(+)

drivers/bluetooth/btusb.c +4 -0

index 7fa373b..278e811 100644
@@ -336,6 +336,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
 	{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW },
 	{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL },
+	{ USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_NEW },
 
 	/* Other Intel Bluetooth devices */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),

@@ -2036,6 +2037,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	switch (ver.hw_variant) {
 	case 0x0b:	/* SfP */
 	case 0x0c:	/* WsP */
+	case 0x11:	/* JfP */
 	case 0x12:	/* ThP */
 		break;
 	default:

@@ -2138,6 +2140,8 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	 * Currently the supported hardware variants are:
 	 *   11 (0x0b) for iBT3.0 (LnP/SfP)
 	 *   12 (0x0c) for iBT3.5 (WsP)
+	 *   17 (0x11) for iBT3.5 (JfP)
+	 *   18 (0x12) for iBT3.5 (ThP)
 	 */
 	snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.sfi",
 		 le16_to_cpu(ver.hw_variant),

Signature · 1 line

2.4.11

Marcel Holtmann

maintainer

2017-05-02 03:08 UTC #1 lore raw

Hi Tedd,

Quoted 48 lines

T:  Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#=  5 Spd=12   MxCh= 0
D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0aaa Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Bootloader version:
< HCI Command: Intel Read Version (0x3f|0x0005) plen 0

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 13

     Intel Read Version (0x3f|0x0005) ncmd 32
       Status: Success (0x00)
       Hardware platform: 0x37
       Hardware variant: 0x11
       Hardware revision: 0.0
       Firmware variant: 0x06
       Firmware revision: 0.1
       Firmware build: 42-52.2015
       Firmware patch: 0

Quoted 4 lines

Signed-off-by Tedd Ho-Jeong An <[email protected]>
---
drivers/bluetooth/btusb.c | 4 ++++
1 file changed, 4 insertions(+)

patch has been applied to bluetooth-next tree.

Regards

Marcel