ARM: mvebu: switch db-88f6820-amc to DM for i2c
PATCH 1/1 ARM: mvebu: switch db-88f6820-amc to DM for i2c
Move existing configuration from header file to defconfig or dts as appropriate.
Signed-off-by Chris Packham <[email protected]>
---
arch/arm/dts/armada-385-amc.dts | 3 +++ configs/db-88f6820-amc_defconfig | 2 ++ include/configs/db-88f6820-amc.h | 7 ------- 3 files changed, 5 insertions(+), 7 deletions(-)
arch/arm/dts/armada-385-amc.dts +3 -0
@@ -54,6 +54,7 @@ aliases { ethernet0 = ð0; ethernet1 = ð1; + i2c0 = &i2c0; spi1 = &spi1; };
@@ -68,6 +69,8 @@ internal-regs { i2c at 11000 { + clock-frequency = <100000>; + u-boot,i2c-slave-addr = <0x0>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; status = "okay";
configs/db-88f6820-amc_defconfig +2 -0
@@ -36,6 +36,8 @@ CONFIG_EFI_PARTITION=y # CONFIG_PARTITION_UUIDS is not set # CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_SPL_OF_TRANSLATE=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MVTWSI=y # CONFIG_MMC is not set CONFIG_NAND_PXA3XX=y CONFIG_SPI_FLASH=y
include/configs/db-88f6820-amc.h +0 -7
@@ -27,13 +27,6 @@#define CONFIG_CMD_ENV #define CONFIG_CMD_PCI -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MVTWSI -#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE -#define CONFIG_SYS_I2C_SLAVE 0x0 -#define CONFIG_SYS_I2C_SPEED 100000 -/* SPI NOR flash default params, used by sf commands */ #define CONFIG_SF_DEFAULT_BUS 1#define CONFIG_SF_DEFAULT_SPEED 1000000
Signature · 1 line
2.11.0.24.ge6920cf
PATCH 1/1 ARM: mvebu: switch db-88f6820-amc to DM for i2c
Quoted 11 lines · Chris Packham
Move existing configuration from header file to defconfig or dts as appropriate.
Signed-off-by Chris Packham <[email protected]>---
arch/arm/dts/armada-385-amc.dts | 3 +++ configs/db-88f6820-amc_defconfig | 2 ++ include/configs/db-88f6820-amc.h | 7 ------- 3 files changed, 5 insertions(+), 7 deletions(-)
Reviewed-by Simon Glass <[email protected]>
PATCH 1/1 ARM: mvebu: switch db-88f6820-amc to DM for i2c
In reply to Chris PackhamQuoted 4 lines · Chris Packham
Move existing configuration from header file to defconfig or dts as appropriate.
Signed-off-by Chris Packham <[email protected]>
Reviewed-by Stefan Roese <[email protected]>
Thanks,
Stefan
PATCH 1/1 ARM: mvebu: switch db-88f6820-amc to DM for i2c
In reply to Chris PackhamQuoted 4 lines · Chris Packham
Move existing configuration from header file to defconfig or dts as appropriate.
Signed-off-by Chris Packham <[email protected]>
Applied to u-boot-marvell/master.
Thanks,
Stefan