Switch odroid to use distro_bootcmd.
cover Switch odroid to use distro_bootcmd.
Using distro_bootcmd standardizes board behavior across many platforms. This is particularly useful for distributions supporting multiple boards without requiring custom configuration for each board.
There are a few changes needed to support distro_bootcmd, such as fixing the default value for the console setting, increasing the environment size, and allowing distro bootcmd to set the default bootdelay.
These patches have been used in Debian's u-boot packaging since May of 2016.
Vagrant Cascadian (4):
Fix default console on odroid to only specify the device, as
"console=" is redundant with the boot environment.
Increase the default environment size on odroid, as
config_distro_bootcmd requires a more space for the environment.
Switch odroid to use config_distro_bootcmd.
Inherit default value for bootdelay from distro_bootcmd on odroid.
include/configs/odroid.h | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-)
Signature · 1 line
2.11.0
PATCH RESEND 1/4 Fix default console on odroid to only specify the device, as "console=" is redundant with the boot environment.
---
include/configs/odroid.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/configs/odroid.h +1 -1
@@ -45,7 +45,7 @@#define CONFIG_BOOTARGS "Please use defined boot"#define CONFIG_BOOTCOMMAND "run autoboot" -#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" +#define CONFIG_DEFAULT_CONSOLE "ttySAC1,115200n8\0"#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE)
Signature · 1 line
2.11.0
PATCH RESEND 2/4 Increase the default environment size on odroid, as config_distro_bootcmd requires a more space for the environment.
In reply to Vagrant Cascadian---
include/configs/odroid.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/configs/odroid.h +1 -1
@@ -54,7 +54,7 @@#define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV -#define CONFIG_ENV_SIZE 4096 +#define CONFIG_ENV_SIZE 8192#define CONFIG_ENV_OFFSET (SZ_1K * 1280)/* 1.25 MiB offset */ #define CONFIG_ENV_OVERWRITE
Signature · 1 line
2.11.0
PATCH RESEND 3/4 Switch odroid to use config_distro_bootcmd.
In reply to Vagrant CascadianUsing distro_bootcmd standardizes board behavior across many platforms. This is particularly useful for distributions supporting multiple boards without requiring custom configuration for each board.
---
include/configs/odroid.h | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-)
include/configs/odroid.h +17 -3
@@ -43,8 +43,6 @@/* Console configuration */ -#define CONFIG_BOOTARGS "Please use defined boot" -#define CONFIG_BOOTCOMMAND "run autoboot"#define CONFIG_DEFAULT_CONSOLE "ttySAC1,115200n8\0"#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
@@ -87,6 +85,20 @@"bl2 raw 0x1f 0x1d;" \ "tzsw raw 0x83f 0x138\0" +#define BOOT_TARGET_DEVICES (func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 0) + +#include <config_distro_bootcmd.h> + +#define MEM_LAYOUT_ENV_SETTINGS \ + "bootm_size=0x10000000\0" \ + "kernel_addr_r=0x42000000\0" \ + "fdt_addr_r=0x43000000\0" \ + "ramdisk_addr_r=0x43300000\0" \ + "scriptaddr=0x50000000\0" \ + "pxefile_addr_r=0x51000000\0" +/* * Bootable media layout: * dev: SD eMMC(part boot)
@@ -173,7 +185,9 @@"initrdname=uInitrd\0" \"initrdaddr=42000000\0" \"scriptaddr=0x42000000\0" \ -"fdtaddr=40800000\0" +"fdtaddr=40800000\0" \ +MEM_LAYOUT_ENV_SETTINGS \ +BOOTENV /* I2C */ #define CONFIG_SYS_I2C_S3C24X0
Signature · 1 line
2.11.0
PATCH RESEND 4/4 Inherit default value for bootdelay from distro_bootcmd on odroid.
In reply to Vagrant CascadianThe default value with distro_bootcmd is 2 seconds, which is reasonably fast, and provides a consistent experience across platforms supporting distro_bootcmd.
The current bootdelay value of 0 seconds is a bit challenging to interrupt when desired.
---
include/configs/odroid.h | 1 - 1 file changed, 1 deletion(-)
include/configs/odroid.h +0 -1
@@ -177,7 +177,6 @@"mmcbootpart=1\0" \"mmcrootdev=0\0" \"mmcrootpart=2\0" \ -"bootdelay=0\0" \"dfu_alt_system=" CONFIG_DFU_ALT \"dfu_alt_info=Please reset the board\0" \"consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
Signature · 1 line
2.11.0
cover Switch odroid to use distro_bootcmd.
In reply to Vagrant CascadianQuoted 8 lines · Vagrant Cascadian
Using
distro_bootcmdstandardizes board behavior across many platforms. This is particularly useful for distributions supporting multiple boards without requiring custom configuration for each board.There are a few changes needed to support
distro_bootcmd, such as fixing the default value for the console setting, increasing the environment size, and allowing distro bootcmd to set the default bootdelay.
Any chance to get this series considered?
live well,
vagrant
Quoted 12 lines
These patches have been used in Debian's u-boot packaging since May of 2016.
Vagrant Cascadian (4):
Fix default console on odroid to only specify the device, as
"console=" is redundant with the boot environment.
Increase the default environment size on odroid, as
config_distro_bootcmdrequires a more space for the environment.
Switch odroid to useconfig_distro_bootcmd.
Inherit default value for bootdelay fromdistro_bootcmdon odroid.
Quoted 5 lines
include/configs/odroid.h | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-)Signature · 1 line
2.11.0
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170712/49adb4ca/attachment.sig>