arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS
Subsystems (2)
PATCH 1/1 arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS
From: Abel Vesa <[email protected]>
The DYNAMIC_FTRACE_WITH_REGS configuration makes it possible for a ftrace operation to specify if registers need to saved/restored by the ftrace handler. This is needed by kgraft and possibly other ftrace-based tools, and the ARM architecture is currently lacking this feature. It would also be the first step to support the "Kprobes-on-ftrace" optimization on ARM.
This patch introduces a new ftrace handler that stores the registers on the stack before calling the next stage. The registers are restored from the stack before going back to the instrumented function.
A side-effect of this patch is to activate the support for ftrace_modify_call() as it defines ARCH_SUPPORTS_FTRACE_OPS for the ARM architecture.
--- arch/arm/Kconfig | 1 + arch/arm/include/asm/ftrace.h | 4 ++ arch/arm/kernel/entry-ftrace.S | 100 +++++++++++++++++++++++++++++++++++++++++ arch/arm/kernel/ftrace.c | 37 +++++++++++++++ 4 files changed, 142 insertions(+)
arch/arm/Kconfig +1 -0
@@ -56,6 +56,7 @@ config ARM select HAVE_DMA_API_DEBUG select HAVE_DMA_CONTIGUOUS if MMU select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU + select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU select HAVE_EXIT_THREAD select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
arch/arm/include/asm/ftrace.h +4 -0
@@ -1,6 +1,10 @@#ifndef _ASM_ARM_FTRACE#define _ASM_ARM_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +#define ARCH_SUPPORTS_FTRACE_OPS 1 +#endif +#ifdef CONFIG_FUNCTION_TRACER #define MCOUNT_ADDR ((unsigned long)(__gnu_mcount_nc))#define MCOUNT_INSN_SIZE 4/* sizeof mcount call */
arch/arm/kernel/entry-ftrace.S +100 -0
124 lines not on this page · raw message
arch/arm/kernel/ftrace.c +37 -0
@@ -141,6 +141,15 @@ int ftrace_update_ftrace_func(ftrace_func_t func) ret =ftrace_modify_code (pc,0 , new, false); +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +if (!ret) { + pc = (unsigned long )&ftrace_regs_call; + new =ftrace_call_replace (pc, (unsigned long )func); + + ret =ftrace_modify_code (pc,0 , new, false); + } +#endif +#ifdef CONFIG_OLD_MCOUNT if (!ret) { pc = (unsigned long )&ftrace_call_old;
@@ -159,11 +168,29 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)unsigned long ip = rec->ip; old =ftrace_nop_replace (rec); + + new =ftrace_call_replace (ip,adjust_address (rec, addr)); + +return ftrace_modify_code (rec->ip, old, new, true); +} + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS + +int ftrace_modify_call (struct dyn_ftrace *rec,unsigned long old_addr, +unsigned long addr) +{ +unsigned long new, old; +unsigned long ip = rec->ip; + + old =ftrace_call_replace (ip,adjust_address (rec, old_addr)); + new =ftrace_call_replace (ip,adjust_address (rec, addr));return ftrace_modify_code (rec->ip, old, new, true); } +#endif +int ftrace_make_nop (struct module *mod,struct dyn_ftrace *rec,unsigned long addr) {
@@ -231,6 +258,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,extern unsigned long ftrace_graph_call;extern unsigned long ftrace_graph_call_old;extern void ftrace_graph_caller_old (void ); +extern unsigned long ftrace_graph_regs_call; +extern void ftrace_graph_regs_caller (void );static int __ftrace_modify_caller (unsigned long *callsite,void (*func) (void ),bool enable)
@@ -253,6 +282,14 @@ static int ftrace_modify_graph_caller(bool enable) ftrace_graph_caller, enable); +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +if (!ret) + ret =__ftrace_modify_caller (&ftrace_graph_regs_call, + ftrace_graph_regs_caller, + enable); +#endif + +#ifdef CONFIG_OLD_MCOUNT if (!ret) ret = __ftrace_modify_caller(&ftrace_graph_call_old,
Signature · 1 line
2.7.4
Quoted 1 line · abelvesa at gmail.com
From: Abel Vesa <[email protected]>
To be ignored, wrong git config. Will send another one without the From line.
Quoted 257 lines
The
DYNAMIC_FTRACE_WITH_REGSconfiguration makes it possible for a ftrace operation to specify if registers need to saved/restored by the ftrace handler. This is needed by kgraft and possibly other ftrace-based tools, and the ARM architecture is currently lacking this feature. It would also be the first step to support the "Kprobes-on-ftrace" optimization on ARM.This patch introduces a new ftrace handler that stores the registers on the stack before calling the next stage. The registers are restored from the stack before going back to the instrumented function.
A side-effect of this patch is to activate the support for
ftrace_modify_call()as it definesARCH_SUPPORTS_FTRACE_OPSfor the ARM architecture.Signed-off-by Abel Vesa <[email protected]>--- arch/arm/Kconfig | 1 + arch/arm/include/asm/ftrace.h | 4 ++ arch/arm/kernel/entry-ftrace.S | 100 +++++++++++++++++++++++++++++++++++++++++ arch/arm/kernel/ftrace.c | 37 +++++++++++++++ 4 files changed, 142 insertions(+)arch/arm/Kconfig +1
-0@@ -56,6 +56,7 @@ config ARM select HAVE_DMA_API_DEBUG select HAVE_DMA_CONTIGUOUS if MMU select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU + select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU select HAVE_EXIT_THREAD select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)arch/arm/include/asm/ftrace.h +4
-0@@ -1,6 +1,10 @@#ifndef _ASM_ARM_FTRACE#define _ASM_ARM_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +#define ARCH_SUPPORTS_FTRACE_OPS 1 +#endif +#ifdef CONFIG_FUNCTION_TRACER #define MCOUNT_ADDR ((unsigned long)(__gnu_mcount_nc))#define MCOUNT_INSN_SIZE 4/* sizeof mcount call */ arch/arm/kernel/entry-ftrace.S +100
-0@@ -92,12 +92,95 @@ 2: mcount_exit .endm +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS + +.macro __ftrace_regs_caller + + sub sp, sp, #8 @ space for PC and CPSR OLD_R0, + @ OLD_R0 will overwrite previous LR + + add ip, sp, #12 @ move in IP the value of SP as it was + @ before the push {lr} of the mcount mechanism + + str lr, [sp, #0] @ store LR instead of PC + + ldr lr, [sp, #8] @ get previous LR + + str r0, [sp, #8] @ write r0 as OLD_R0 over previous LR + + stmdb sp!, {ip, lr} + stmdb sp!, {r0-r11, lr} + + @ stack content at this point: + @ 0 4 48 52 56 60 64 68 72 + @ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 | + + mov r3, sp @ struct pt_regs* + + ldr r2, =function_trace_op + ldr r2, [r2] @ pointer to the current + @ function tracing op + + ldr r1, [sp, #S_LR] @ lr of instrumented func + + ldr lr, [sp, #S_PC] @ get LR + + mcount_adjust_addr r0, lr @ instrumented function + + .globl ftrace_regs_call +ftrace_regs_call: + bl ftrace_stub + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + .globl ftrace_graph_regs_call +ftrace_graph_regs_call: + mov r0, r0 +#endif + + @ pop saved regs + ldmia sp!, {r0-r12} @ restore r0 through r12 + ldr ip, [sp, #8] @ restore PC + ldr lr, [sp, #4] @ restore LR + ldr sp, [sp, #0] @ restore SP + mov pc, ip @ return +.endm + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +.macro __ftrace_graph_regs_caller + + sub r0, fp, #4 @ lr of instrumented routine (parent) + + @ called from __ftrace_regs_caller + ldr r1, [sp, #S_PC] @ instrumented routine (func) + mcount_adjust_addr r1, r1 + + mov r2, fp @ frame pointer + bl prepare_ftrace_return + + @ pop registers saved in ftrace_regs_caller + ldmia sp!, {r0-r12} @ restore r0 through r12 + ldr ip, [sp, #8] @ restore PC + ldr lr, [sp, #4] @ restore LR + ldr sp, [sp, #0] @ restore SP + mov pc, ip @ return + +.endm +#endif +#endif + .macro __ftrace_caller suffix mcount_enter mcount_get_lr r1 @ lr of instrumented func mcount_adjust_addr r0, lr @ instrumented function +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS + ldr r2, =function_trace_op + ldr r2, [r2] @ pointer to the current + @ function tracing op + mov r3, #0 @ regs is NULL +#endif + .globl ftrace_call\suffix ftrace_call\suffix: bl ftrace_stub@@ -212,6 +295,15 @@ UNWIND(.fnstart) __ftrace_caller UNWIND(.fnend) ENDPROC(ftrace_caller) + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +ENTRY(ftrace_regs_caller) +UNWIND(.fnstart) + __ftrace_regs_caller +UNWIND(.fnend) +ENDPROC(ftrace_regs_caller) +#endif + #endif #ifdef CONFIG_FUNCTION_GRAPH_TRACER@@ -220,6 +312,14 @@ UNWIND(.fnstart) __ftrace_graph_caller UNWIND(.fnend) ENDPROC(ftrace_graph_caller) + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +ENTRY(ftrace_graph_regs_caller) +UNWIND(.fnstart) + __ftrace_graph_regs_caller +UNWIND(.fnend) +ENDPROC(ftrace_graph_regs_caller) +#endif #endif .purgem mcount_enterarch/arm/kernel/ftrace.c +37
-0@@ -141,6 +141,15 @@ int ftrace_update_ftrace_func(ftrace_func_t func) ret =ftrace_modify_code (pc,0 , new, false); +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +if (!ret) { + pc = (unsigned long )&ftrace_regs_call; + new =ftrace_call_replace (pc, (unsigned long )func); + + ret =ftrace_modify_code (pc,0 , new, false); + } +#endif +#ifdef CONFIG_OLD_MCOUNT if (!ret) { pc = (unsigned long )&ftrace_call_old;@@ -159,11 +168,29 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)unsigned long ip = rec->ip; old =ftrace_nop_replace (rec); + + new =ftrace_call_replace (ip,adjust_address (rec, addr)); + +return ftrace_modify_code (rec->ip, old, new, true); +} + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS + +int ftrace_modify_call (struct dyn_ftrace *rec,unsigned long old_addr, +unsigned long addr) +{ +unsigned long new, old; +unsigned long ip = rec->ip; + + old =ftrace_call_replace (ip,adjust_address (rec, old_addr)); + new =ftrace_call_replace (ip,adjust_address (rec, addr));return ftrace_modify_code (rec->ip, old, new, true); } +#endif +int ftrace_make_nop (struct module *mod,struct dyn_ftrace *rec,unsigned long addr) {@@ -231,6 +258,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,extern unsigned long ftrace_graph_call;extern unsigned long ftrace_graph_call_old;extern void ftrace_graph_caller_old (void ); +extern unsigned long ftrace_graph_regs_call; +extern void ftrace_graph_regs_caller (void );static int __ftrace_modify_caller (unsigned long *callsite,void (*func) (void ),bool enable)@@ -253,6 +282,14 @@ static int ftrace_modify_graph_caller(bool enable) ftrace_graph_caller, enable); +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +if (!ret) + ret =__ftrace_modify_caller (&ftrace_graph_regs_call, + ftrace_graph_regs_caller, + enable); +#endif + +#ifdef CONFIG_OLD_MCOUNT if (!ret) ret = __ftrace_modify_caller(&ftrace_graph_call_old,Signature · 1 line
2.7.4