arch/arm/cpu/arm926ejs/omap: Remove
Subsystems (18)
PATCH 1/17 arch/arm/cpu/arm926ejs/omap: Remove
This code has been unused since the removal of the "omap2" platforms, remove.
Signed-off-by Tom Rini <[email protected]>
--- arch/arm/cpu/arm926ejs/omap/Makefile | 10 -- arch/arm/cpu/arm926ejs/omap/cpuinfo.c | 242 ---------------------------------- arch/arm/cpu/arm926ejs/omap/reset.S | 29 ---- arch/arm/cpu/arm926ejs/omap/timer.c | 152 --------------------- 4 files changed, 433 deletions(-) delete mode 100644 arch/arm/cpu/arm926ejs/omap/Makefile delete mode 100644 arch/arm/cpu/arm926ejs/omap/cpuinfo.c delete mode 100644 arch/arm/cpu/arm926ejs/omap/reset.S delete mode 100644 arch/arm/cpu/arm926ejs/omap/timer.c
arch/arm/cpu/arm926ejs/omap/Makefile deleted +0 -10
@@ -1,10 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = timer.o -obj-$(CONFIG_DISPLAY_CPUINFO) += cpuinfo.o -obj-y += reset.o
arch/arm/cpu/arm926ejs/omap/cpuinfo.c deleted +0 -242
242 lines not on this page · raw message
arch/arm/cpu/arm926ejs/omap/reset.S deleted +0 -29
@@ -1,29 +0,0 @@ -/* - * armboot - Startup Code for ARM926EJS CPU-core - * - * Copyright (c) 2003 Texas Instruments - * - * ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------ - * - * Copyright (c) 2001 Marius Gröger <[email protected]> - * Copyright (c) 2002 Alex Züpke <[email protected]> - * Copyright (c) 2002 Gary Jennejohn <[email protected]> - * Copyright (c) 2003 Richard Woodruff <[email protected]> - * Copyright (c) 2003 Kshitij <[email protected]> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - .align 5 -.globl reset_cpu -reset_cpu: - ldr r1, rstctl1 /* get clkm1 reset ctl */ - mov r3, #0x0 - strh r3, [r1] /* clear it */ - mov r3, #0x8 - strh r3, [r1] /* force dsp+arm reset */ -_loop_forever: - b _loop_forever - -rstctl1: - .word 0xfffece10
arch/arm/cpu/arm926ejs/omap/timer.c deleted +0 -152
152 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH 1/17 arch/arm/cpu/arm926ejs/omap: Remove
Quoted 4 lines · Tom Rini
This code has been unused since the removal of the "omap2" platforms, remove.
Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/cc353231/attachment.sig>
PATCH 2/17 omap24xx_i2c.c: Drop references to CONFIG_OMAP243X
In reply to Tom RiniWe have nothing defining CONFIG_OMAP243X since we dropped the omap243x platforms, drop these tests.
Signed-off-by Tom Rini <[email protected]>
--- drivers/i2c/omap24xx_i2c.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/i2c/omap24xx_i2c.c +3 -3
@@ -122,7 +122,7 @@ static int wait_for_bb(struct i2c *i2c_base, int waitdelay)u16 stat;writew (0xFFFF , &i2c_base->stat);/* clear current interrupts...*/ -#if defined(CONFIG_OMAP243X ) || defined(CONFIG_OMAP34XX ) +#if defined(CONFIG_OMAP34XX )while ((stat =readw (&i2c_base->stat) &I2C_STAT_BB ) && timeout--) {#else /* Read RAW status */
@@ -153,7 +153,7 @@ static u16 wait_for_event(struct i2c *i2c_base, int waitdelay) do { udelay(waitdelay); -#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) +#if defined(CONFIG_OMAP34XX) status = readw(&i2c_base->stat); #else /* Read RAW status */
@@ -338,7 +338,7 @@ retry:/* own address */ writew (slaveadd, &i2c_base->oa); -#if defined(CONFIG_OMAP243X ) || defined(CONFIG_OMAP34XX ) +#if defined(CONFIG_OMAP34XX )/* * Have to enable interrupts for OMAP2/3, these IPs don't have * an 'irqstatus_raw' register and we shall have to poll 'stat'
Signature · 1 line
1.9.1
PATCH 2/17 omap24xx_i2c.c: Drop references to CONFIG_OMAP243X
Hello Tom,
Am 13.05.2017 um 04:33 schrieb Tom Rini:
Quoted 7 lines
We have nothing defining
CONFIG_OMAP243Xsince we dropped the omap243x platforms, drop these tests.Signed-off-by Tom Rini <[email protected]>--- drivers/i2c/omap24xx_i2c.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
as you have delegated this patch to your Patchwork ToDo list:
Acked-by Heiko Schocher <[email protected]>
bye,
Heiko
Quoted 33 lines
drivers/i2c/omap24xx_i2c.c +3
-3@@ -122,7 +122,7 @@ static int wait_for_bb(struct i2c *i2c_base, int waitdelay)u16 stat;writew (0xFFFF , &i2c_base->stat);/* clear current interrupts...*/ -#if defined(CONFIG_OMAP243X ) || defined(CONFIG_OMAP34XX ) +#if defined(CONFIG_OMAP34XX )while ((stat =readw (&i2c_base->stat) &I2C_STAT_BB ) && timeout--) {#else /* Read RAW status */ @@ -153,7 +153,7 @@ static u16 wait_for_event(struct i2c *i2c_base, int waitdelay) do { udelay(waitdelay); -#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) +#if defined(CONFIG_OMAP34XX) status = readw(&i2c_base->stat); #else /* Read RAW status */@@ -338,7 +338,7 @@ retry:/* own address */ writew (slaveadd, &i2c_base->oa); -#if defined(CONFIG_OMAP243X ) || defined(CONFIG_OMAP34XX ) +#if defined(CONFIG_OMAP34XX )/* * Have to enable interrupts for OMAP2/3, these IPs don't have * an 'irqstatus_raw' register and we shall have to poll 'stat'
Signature · 2 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
PATCH 2/17 omap24xx_i2c.c: Drop references to CONFIG_OMAP243X
In reply to Tom RiniQuoted 5 lines · Tom Rini
We have nothing defining
CONFIG_OMAP243Xsince we dropped the omap243x platforms, drop these tests.Signed-off-by Tom Rini <[email protected]>Acked-by Heiko Schocher <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/7e5eff2a/attachment.sig>
PATCH 3/17 TI: Drop 'CONFIG_OMAP'
In reply to Tom RiniIn the two cases in the code where we use CONFIG_OMAP as a useful test currently we can make use of CONFIG_ARCH_OMAP2PLUS instead. With that changed we can drop all defines of CONFIG_OMAP. While in here, CONFIG_OMAP3430 is only defined and then never used, so drop.
Signed-off-by Tom Rini <[email protected]>
--- arch/arm/include/asm/spl.h | 2 +- drivers/serial/ns16550.c | 10 +++------- include/configs/am3517_crane.h | 1 - include/configs/am3517_evm.h | 4 ---- include/configs/bur_am335x_common.h | 1 - include/configs/cm_t35.h | 1 - include/configs/cm_t3517.h | 1 - include/configs/kc1.h | 2 -- include/configs/mcx.h | 1 - include/configs/nokia_rx51.h | 3 --- include/configs/omap3_evm.h | 1 - include/configs/siemens-am33x-common.h | 1 - include/configs/sniper.h | 6 ------ include/configs/tam3517-common.h | 1 - include/configs/tao3530.h | 2 -- include/configs/ti814x_evm.h | 1 - include/configs/ti816x_evm.h | 1 - include/configs/ti_armv7_omap.h | 3 --- include/configs/tricorder.h | 3 --- scripts/config_whitelist.txt | 2 -- 20 files changed, 4 insertions(+), 43 deletions(-)
arch/arm/include/asm/spl.h +1 -1
@@ -7,7 +7,7 @@#ifndef _ASM_SPL_H_#define _ASM_SPL_H_ -#if defined(CONFIG_OMAP ) \ +#if defined(CONFIG_ARCH_OMAP2PLUS ) \ || defined(CONFIG_EXYNOS4 ) || defined(CONFIG_EXYNOS5 ) \ || defined(CONFIG_EXYNOS4210 )/* Platform-specific defines */
drivers/serial/ns16550.c +3 -7
@@ -175,21 +175,17 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) ;serial_out (CONFIG_SYS_NS16550_IER , &com_port->ier); -#if defined(CONFIG_OMAP ) || defined(CONFIG_AM33XX ) || \ - defined(CONFIG_TI81XX ) || defined(CONFIG_AM43XX ) +#if defined(CONFIG_ARCH_OMAP2PLUS )serial_out (0x7 , &com_port->mdr1);/* mode select reset TL16C750*/ #endif serial_out (UART_MCRVAL , &com_port->mcr);serial_out (ns16550_getfcr (com_port), &com_port->fcr);if (baud_divisor !=-1 )NS16550_setbrg (com_port, baud_divisor); -#if defined(CONFIG_OMAP ) || \ - defined(CONFIG_AM33XX ) || defined(CONFIG_SOC_DA8XX ) || \ - defined(CONFIG_TI81XX ) || defined(CONFIG_AM43XX ) - +#if defined(CONFIG_ARCH_OMAP2PLUS ) || defined(CONFIG_SOC_DA8XX )/* /16 is proper to hit 115200 with 48MHz */ serial_out (0 , &com_port->mdr1); -#endif /* CONFIG_OMAP */ +#endif #if defined(CONFIG_SOC_KEYSTONE )serial_out (UART_REG_VAL_PWREMU_MGMT_UART_ENABLE , &com_port->regC);#endif
include/configs/am3517_crane.h +0 -1
@@ -16,7 +16,6 @@/* * High Level Configuration Options */ -#define CONFIG_OMAP 1/* in a TI OMAP core */ #define CONFIG_OMAP3_AM3517CRANE 1/* working with CRANEBOARD */ #define CONFIG_EMIF4 /* The chip has EMIF4 controller */
include/configs/am3517_evm.h +0 -4
@@ -13,10 +13,6 @@#ifndef __CONFIG_H#define __CONFIG_H -/* High Level Configuration Options */ - -#define CONFIG_OMAP -#define CONFIG_NR_DRAM_BANKS 2/* CS1 may or may not be populated */ #define CONFIG_EMIF4 /* The chip has EMIF4 controller */
include/configs/bur_am335x_common.h +0 -1
@@ -13,7 +13,6 @@#define __BUR_AM335X_COMMON_H__/* ------------------------------------------------------------------------- */ #define CONFIG_AM33XX -#define CONFIG_OMAP #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20)/* 1GB */ /* Timer information */
include/configs/cm_t35.h +0 -1
@@ -22,7 +22,6 @@/* * High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP_GPIO #define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */
include/configs/cm_t3517.h +0 -1
@@ -13,7 +13,6 @@/* * High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_CM_T3517 /* working with CM-T3517 */ #define CONFIG_SYS_TEXT_BASE 0x80008000
include/configs/kc1.h +0 -2
@@ -26,8 +26,6 @@/* * Platform */ - -#define CONFIG_OMAP #define CONFIG_OMAP4430 /*
include/configs/mcx.h +0 -1
@@ -12,7 +12,6 @@/* * High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP3_MCX /* working with mcx */ #define CONFIG_OMAP_GPIO
include/configs/nokia_rx51.h +0 -3
@@ -22,9 +22,6 @@/* * High Level Configuration Options */ - -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP3430 /* which is in a 3430 */ #define CONFIG_OMAP3_RX51 /* working with RX51 */ #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
include/configs/omap3_evm.h +0 -1
@@ -83,7 +83,6 @@/* * High level configuration options */ -#define CONFIG_OMAP /* This is TI OMAP core */ #define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* The chip has SDRC controller */
include/configs/siemens-am33x-common.h +0 -1
@@ -15,7 +15,6 @@#define __CONFIG_SIEMENS_AM33X_COMMON_H#define CONFIG_AM33XX -#define CONFIG_OMAP #include <asm/arch/omap.h>
include/configs/sniper.h +0 -6
@@ -19,12 +19,6 @@#define CONFIG_ARM_ARCH_CP15_ERRATA /* -* Platform -*/ - -#define CONFIG_OMAP - -/* * Board */
include/configs/tam3517-common.h +0 -1
@@ -13,7 +13,6 @@/* * High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP_GPIO #define CONFIG_SYS_TEXT_BASE 0x80008000
include/configs/tao3530.h +0 -2
@@ -16,8 +16,6 @@/* * High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* Has an SDRC controller */
include/configs/ti814x_evm.h +0 -1
@@ -18,7 +18,6 @@#define CONFIG_TI81XX #define CONFIG_TI814X -#define CONFIG_OMAP #include <asm/arch/omap.h>
include/configs/ti816x_evm.h +0 -1
@@ -12,7 +12,6 @@#define CONFIG_TI81XX #define CONFIG_TI816X -#define CONFIG_OMAP #define CONFIG_ARCH_CPU_INIT
include/configs/ti_armv7_omap.h +0 -3
@@ -12,9 +12,6 @@#ifndef __CONFIG_TI_ARMV7_OMAP_H__#define __CONFIG_TI_ARMV7_OMAP_H__ -/* Common defines for all OMAP architecture based SoCs */ -#define CONFIG_OMAP -/* I2C IP block */ #define CONFIG_SYS_OMAP24_I2C_SPEED 100000#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
include/configs/tricorder.h +0 -3
@@ -16,9 +16,6 @@#ifndef __CONFIG_H#define __CONFIG_H -/* High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_MACH_TYPE MACH_TYPE_TRICORDER/* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
scripts/config_whitelist.txt +0 -2
@@ -1980,8 +1980,6 @@ CONFIG_OF_SPI CONFIG_OF_SPI_FLASH CONFIG_OF_STDOUT_PATH CONFIG_OF_SUPPORT_OLD_DEVICE_TREES -CONFIG_OMAP -CONFIG_OMAP3430 CONFIG_OMAP3_AM3517CRANE CONFIG_OMAP3_DEVKIT8000 CONFIG_OMAP3_EVM
Signature · 1 line
1.9.1
PATCH 3/17 TI: Drop 'CONFIG_OMAP'
Quoted 6 lines · Tom Rini
In the two cases in the code where we use
CONFIG_OMAPas a useful test currently we can make use ofCONFIG_ARCH_OMAP2PLUSinstead. With that changed we can drop all defines ofCONFIG_OMAP. While in here,CONFIG_OMAP3430is only defined and then never used, so drop.Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/1e04bc9b/attachment.sig>
PATCH 4/17 omap5: Migrate CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC to Kconfig
In reply to Tom RiniWhile in theory this value could be used in places outside of "omap5" (such as OMAP4), we only make use of it today in OMAP5, so place the Kconfig entry there. Given that Kconfig lets us provide a default, we drop CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC entirely. The contents of doc/README.omap-reset-time make a good help entry, so adjust them slightly and delete the file. Move the comment about range to where we use the value now, and have Kconfig enforce the upper bound.
Signed-off-by Tom Rini <[email protected]>
--- README | 5 ----- arch/arm/include/asm/arch-omap5/clock.h | 7 ------- arch/arm/mach-omap2/omap5/Kconfig | 17 +++++++++++++++++ arch/arm/mach-omap2/omap5/hwinit.c | 13 +++++++------ configs/cm_t54_defconfig | 1 + configs/omap5_uevm_defconfig | 1 + doc/README.omap-reset-time | 20 -------------------- include/configs/cm_t54.h | 3 --- include/configs/omap5_uevm.h | 3 --- scripts/config_whitelist.txt | 2 -- 10 files changed, 26 insertions(+), 46 deletions(-) delete mode 100644 doc/README.omap-reset-time
README +0 -5
@@ -3708,11 +3708,6 @@ Configuration Settings: If defined, don't allow the -f switch to env set override variable access flags. -- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only) - This is set by OMAP boards for the max time that reset should - be asserted. See doc/README.omap-reset-time for details on how - the value can be calculated on a given board. - - CONFIG_USE_STDINT If stdint.h is available with your toolchain you can define this option to enable it. You can provide option 'USE_STDINT=1' when
arch/arm/include/asm/arch-omap5/clock.h +0 -7
@@ -370,13 +370,6 @@#define DPLL_NO_LOCK 0#define DPLL_LOCK 1 -/* -* MAX value for PRM_RSTTIME[9:0]RSTTIME1 stored is 0x3ff. -* 0x3ff is in the no of FUNC_32K_CLK cycles. Converting cycles -* into microsec and passing the value. -*/ -#define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC 31219 -#if defined(CONFIG_DRA7XX )#define V_OSCK 20000000/* Clock output from T2 */ #else
arch/arm/mach-omap2/omap5/Kconfig +17 -0
@@ -63,6 +63,23 @@ config TI_SECURE_EMIF_PROTECTED_REGION_SIZE using hardware memory firewalls. This value must be smaller than the TI_SECURE_EMIF_TOTAL_REGION_SIZE value. +config OMAP_PLATFORM_RESET_TIME_MAX_USEC + int "Something" + range 0 31219 + default 31219 + help + Most OMAPs' provide a way to specify the time for which the reset + should be held low while the voltages and Oscillator outputs + stabilize. + This time is mostly board and PMIC dependent. Hence the boards are + expected to specify a pre-computed time using the above option. + This value can be computed using a summation of the below 3 + parameters + 1: Time taken by the Osciallator to stop and restart + 2: PMIC OTP time + 3: Voltage ramp time, which can be derived using the PMIC slew rate + and value of voltage ramp needed. + if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM menu "Voltage Domain OPP selections"
arch/arm/mach-omap2/omap5/hwinit.c +7 -6
@@ -414,12 +414,13 @@ void setup_warmreset_time(void) {u32 rst_time, rst_val; -#ifndef CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC - rst_time =CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC ; -#else - rst_time =CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC ; -#endif - rst_time =usec_to_32k (rst_time) <<RSTTIME1_SHIFT ; +/* +* MAX value for PRM_RSTTIME[9:0]RSTTIME1 stored is 0x3ff. +* 0x3ff is in the no of FUNC_32K_CLK cycles. Converting cycles +* into microsec and passing the value. +*/ + rst_time =usec_to_32k (CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC ) + <<RSTTIME1_SHIFT ;if (rst_time >RSTTIME1_MASK ) rst_time =RSTTIME1_MASK ;
configs/cm_t54_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_OMAP2PLUS=y CONFIG_OMAP54XX=y CONFIG_TARGET_CM_T54=y +CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC=16296 # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=3
configs/omap5_uevm_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_OMAP2PLUS=y CONFIG_OMAP54XX=y CONFIG_TARGET_OMAP5_UEVM=y +CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC=16296 # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_ARMV7_LPAE=y CONFIG_SYS_CONSOLE_INFO_QUIET=y
doc/README.omap-reset-time deleted +0 -20
@@ -1,20 +0,0 @@ -README on how reset time on OMAPs should be calculated - -CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC: -Most OMAPs' provide a way to specify the time for -which the reset should be held low while the voltages -and Oscillator outputs stabilize. - -This time is mostly board and PMIC dependent. Hence the -boards are expected to specify a pre-computed time -using the above option, (the details on how to compute -the value are given below) without which a default time -as specified by CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC -is used. - -The value for CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC -can be computed using a summation of the below 3 parameters --1- Time taken by the Osciallator to stop and restart --2- PMIC OTP time --3- Voltage ramp time, which can be derived using the -PMIC slew rate and value of voltage ramp needed.
include/configs/cm_t54.h +0 -3
@@ -86,9 +86,6 @@#define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_ETHER_MCS7830 -/* Max time to hold reset on this board, see doc/README.omap-reset-time */ -#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296 -/* * Miscellaneous configurable options */
include/configs/omap5_uevm.h +0 -3
@@ -68,9 +68,6 @@#define CONSOLEDEV "ttyO2" -/* Max time to hold reset on this board, see doc/README.omap-reset-time */ -#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296 -#define CONFIG_SCSI #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI
scripts/config_whitelist.txt +0 -2
@@ -617,7 +617,6 @@ CONFIG_DEEP_SLEEP CONFIG_DEFAULT CONFIG_DEFAULT_CONSOLE CONFIG_DEFAULT_IMMR -CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC CONFIG_DEFAULT_SPI_BUS CONFIG_DEFAULT_SPI_CS CONFIG_DEFAULT_SPI_MODE
@@ -1999,7 +1998,6 @@ CONFIG_OMAP_EHCI_PHY1_RESET_GPIO CONFIG_OMAP_EHCI_PHY2_RESET_GPIO CONFIG_OMAP_EHCI_PHY3_RESET_GPIO CONFIG_OMAP_GPIO -CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC CONFIG_OMAP_USB2PHY2_HOST CONFIG_OMAP_USB3PHY1_HOST CONFIG_OMAP_USB_PHY
Signature · 1 line
1.9.1
PATCH 4/17 omap5: Migrate CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC to Kconfig
Quoted 9 lines · Tom Rini
While in theory this value could be used in places outside of "omap5" (such as OMAP4), we only make use of it today in OMAP5, so place the
Kconfigentry there. Given thatKconfiglets us provide a default, we dropCONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USECentirely. The contents of doc/README.omap-reset-time make a good help entry, so adjust them slightly and delete the file. Move the comment about range to where we use the value now, and haveKconfigenforce the upper bound.Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/241f233f/attachment.sig>
PATCH 5/17 omap3: Drop CONFIG_OMAP3_EVM, switch to CONFIG_TARGET_OMAP3_EVM when needed
In reply to Tom RiniWe make use of CONFIG_OMAP3_EVM today to know when to do a specific tweak in MUSB. This can be tested on via CONFIG_TARGET_OMAP3_EVM instead, so switch there so we can drop the now unused symbol CONFIG_OMAP3_EVM. In investigating what to do about the symbol usage we see that the cairo board defines the same function, but never called it (as it does not define CONFIG_OMAP3_EVM) and was just returning anyhow, so drop that function from that board.
Cc "Albert ARIBAUD (3ADEV)" <[email protected]>
Cc Marek Vasut <[email protected]>
Signed-off-by Tom Rini <[email protected]>
--- board/quipos/cairo/cairo.c | 12 ------------ drivers/usb/musb/omap3.c | 2 +- drivers/usb/musb/omap3.h | 2 +- include/configs/omap3_evm.h | 2 -- scripts/config_whitelist.txt | 1 - 5 files changed, 2 insertions(+), 17 deletions(-)
board/quipos/cairo/cairo.c +0 -12
@@ -26,18 +26,6 @@DECLARE_GLOBAL_DATA_PTR ;/* -* MUSB port on OMAP3EVM Rev >= E requires extvbus programming. -*/ -u8 omap3_evm_need_extvbus (void ) -{ -u8 retval =0 ; - -/* TODO: verify if cairo handheld platform needs extvbus programming */ - -return retval; -} - -/* * Routine: board_init * Description: Early hardware init. */
drivers/usb/musb/omap3.c +1 -1
@@ -118,7 +118,7 @@ int musb_platform_init(void) stdby &= ~OMAP3_OTG_FORCESTDBY_STANDBY ;writel (stdby, &otg->forcestdby); -#ifdef CONFIG_OMAP3_EVM +#ifdef CONFIG_TARGET_OMAP3_EVM musb_cfg.extvbus =omap3_evm_need_extvbus ();#endif
drivers/usb/musb/omap3.h +1 -1
@@ -32,7 +32,7 @@int musb_platform_init (void ); -#ifdef CONFIG_OMAP3_EVM +#ifdef CONFIG_TARGET_OMAP3_EVM extern u8 omap3_evm_need_extvbus (void );#endif
include/configs/omap3_evm.h +0 -2
@@ -87,8 +87,6 @@#define CONFIG_SDRC /* The chip has SDRC controller */ -#define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */ -/* * Clock related definitions */
scripts/config_whitelist.txt +0 -1
@@ -1981,7 +1981,6 @@ CONFIG_OF_STDOUT_PATH CONFIG_OF_SUPPORT_OLD_DEVICE_TREES CONFIG_OMAP3_AM3517CRANE CONFIG_OMAP3_DEVKIT8000 -CONFIG_OMAP3_EVM CONFIG_OMAP3_GPIO_2 CONFIG_OMAP3_GPIO_3 CONFIG_OMAP3_GPIO_4
Signature · 1 line
1.9.1
PATCH 5/17 omap3: Drop CONFIG_OMAP3_EVM, switch to CONFIG_TARGET_OMAP3_EVM when needed
Quoted 11 lines · Tom Rini
We make use of
CONFIG_OMAP3_EVMtoday to know when to do a specific tweak in MUSB. This can be tested on viaCONFIG_TARGET_OMAP3_EVMinstead, so switch there so we can drop the now unused symbolCONFIG_OMAP3_EVM. In investigating what to do about the symbol usage we see that the cairo board defines the same function, but never called it (as it does not defineCONFIG_OMAP3_EVM) and was just returning anyhow, so drop that function from that board.Cc "Albert ARIBAUD (3ADEV)" <[email protected]>Cc Marek Vasut <[email protected]>Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/7316808f/attachment.sig>
PATCH 6/17 omap4: Drop redundant CONFIG_OMAP4430 symbol
In reply to Tom RiniWhile there are a few different OMAP4 SoCs, today we always set CONFIG_OMAP4430 and CONFIG_OMAP44XX. Convert the few test of CONFIG_OMAP4430 to CONFIG_OMAP44XX.
Cc Marek Vasut <[email protected]>
Cc Paul Kocialkowski <[email protected]>
Signed-off-by Tom Rini <[email protected]>
--- drivers/usb/musb-new/linux-compat.h | 2 +- drivers/usb/musb-new/omap2430.c | 2 +- drivers/usb/musb/omap3.c | 4 ++-- include/configs/kc1.h | 5 ----- include/configs/ti_omap4_common.h | 4 ---- scripts/config_whitelist.txt | 1 - 6 files changed, 4 insertions(+), 14 deletions(-)
drivers/usb/musb-new/linux-compat.h +1 -1
@@ -30,7 +30,7 @@#define CONFIG_SOC_OMAP3430 #endif -#ifdef CONFIG_OMAP4430 +#ifdef CONFIG_OMAP44XX #define CONFIG_ARCH_OMAP4 #endif
drivers/usb/musb-new/omap2430.c +1 -1
@@ -441,7 +441,7 @@ static int omap2430_musb_enable(struct musb *musb)twl6030_usb_device_settings ();#endif -#ifdef CONFIG_OMAP4430 +#ifdef CONFIG_OMAP44XX u32 *usbotghs_control = (u32 *)((*ctrl)->control_usbotghs_ctrl); *usbotghs_control =USBOTGHS_CONTROL_AVALID |USBOTGHS_CONTROL_VBUSVALID |USBOTGHS_CONTROL_IDDIG ;
drivers/usb/musb/omap3.c +2 -2
@@ -55,7 +55,7 @@ static struct omap3_otg_regs *otg;#define OMAP3_OTG_SYSSTATUS_RESETDONE 0x0001/* OMAP4430 has an internal PHY, use it */ -#ifdef CONFIG_OMAP4430 +#ifdef CONFIG_OMAP44XX #define OMAP3_OTG_INTERFSEL_OMAP 0x0000#else #define OMAP3_OTG_INTERFSEL_OMAP 0x0001
@@ -122,7 +122,7 @@ int musb_platform_init(void) musb_cfg.extvbus =omap3_evm_need_extvbus ();#endif -#ifdef CONFIG_OMAP4430 +#ifdef CONFIG_OMAP44XX u32 *usbotghs_control = (u32 *)((*ctrl)->control_usbotghs_ctrl); *usbotghs_control =0x15 ;
include/configs/kc1.h +0 -5
@@ -24,11 +24,6 @@#define CONFIG_SYS_PL310_BASE 0x48242000/* -* Platform -*/ -#define CONFIG_OMAP4430 - -/* * Board */
include/configs/ti_omap4_common.h +0 -4
@@ -12,10 +12,6 @@#ifndef __CONFIG_TI_OMAP4_COMMON_H#define __CONFIG_TI_OMAP4_COMMON_H -/* -* High Level Configuration Options -*/ -#define CONFIG_OMAP4430 1/* which is in a 4430 */ #define CONFIG_MISC_INIT_R #ifndef CONFIG_SYS_L2CACHE_OFF
scripts/config_whitelist.txt +0 -1
@@ -1992,7 +1992,6 @@ CONFIG_OMAP3_MICRON_DDR CONFIG_OMAP3_RX51 CONFIG_OMAP3_SPI_D0_D1_SWAPPED CONFIG_OMAP3_ZOOM1 -CONFIG_OMAP4430 CONFIG_OMAP_EHCI_PHY1_RESET_GPIO CONFIG_OMAP_EHCI_PHY2_RESET_GPIO CONFIG_OMAP_EHCI_PHY3_RESET_GPIO
Signature · 1 line
1.9.1
PATCH 6/17 omap4: Drop redundant CONFIG_OMAP4430 symbol
Quoted 7 lines · Tom Rini
While there are a few different OMAP4 SoCs, today we always set
CONFIG_OMAP4430andCONFIG_OMAP44XX. Convert the few test ofCONFIG_OMAP4430toCONFIG_OMAP44XX.Cc Marek Vasut <[email protected]>Cc Paul Kocialkowski <[email protected]>Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/ffb004d0/attachment.sig>
PATCH 6/17 omap4: Drop redundant CONFIG_OMAP4430 symbol
In reply to Tom RiniQuoted 3 lines · Tom Rini
While there are a few different OMAP4 SoCs, today we always set
CONFIG_OMAP4430andCONFIG_OMAP44XX. Convert the few test ofCONFIG_OMAP4430toCONFIG_OMAP44XX.
I don't have any omap4 device in hands these days, but I definitely agree with the intent. If this is not merged when I get access back to my device (in approx. 1 month), I will test and report back.
Quoted 109 lines
Cc Marek Vasut <[email protected]>Cc Paul Kocialkowski <[email protected]>Signed-off-by Tom Rini <[email protected]>--- drivers/usb/musb-new/linux-compat.h | 2 +- drivers/usb/musb-new/omap2430.c | 2 +- drivers/usb/musb/omap3.c | 4 ++-- include/configs/kc1.h | 5 ----- include/configs/ti_omap4_common.h | 4 ---- scripts/config_whitelist.txt | 1 - 6 files changed, 4 insertions(+), 14 deletions(-)drivers/usb/musb- renamed from drivers/usb/musb-new/linux-compat.h +0
-0
new/linux-compat.h
index92449775799f..4dae83ed6850100644drivers/usb/musb-new/linux-compat.h +1
-1@@ -30,7 +30,7 @@#define CONFIG_SOC_OMAP3430 #endif -#ifdef CONFIG_OMAP4430 +#ifdef CONFIG_OMAP44XX #define CONFIG_ARCH_OMAP4 #endif drivers/usb/musb- renamed from drivers/usb/musb-new/omap2430.c +0
-0
new/omap2430.c
index684ad9539af5..ba22dfe6cb09100644drivers/usb/musb-new/omap2430.c +1
-1@@ -441,7 +441,7 @@ static int omap2430_musb_enable(struct musb *musb)twl6030_usb_device_settings ();#endif -#ifdef CONFIG_OMAP4430 +#ifdef CONFIG_OMAP44XX u32 *usbotghs_control = (u32 *)((*ctrl)- >control_usbotghs_ctrl); *usbotghs_control = USBOTGHS_CONTROL_AVALID |drivers/usb/musb-new/omap2430.c +0
-0USBOTGHS_CONTROL_VBUSVALID |USBOTGHS_CONTROL_IDDIG ;drivers/usb/musb/omap3.c +2
-2@@ -55,7 +55,7 @@ static struct omap3_otg_regs *otg;#define OMAP3_OTG_SYSSTATUS_RESETDONE 0x0001/* OMAP4430 has an internal PHY, use it */ -#ifdef CONFIG_OMAP4430 +#ifdef CONFIG_OMAP44XX #define OMAP3_OTG_INTERFSEL_OMAP 0x0000#else #define OMAP3_OTG_INTERFSEL_OMAP 0x0001@@ -122,7 +122,7 @@ int musb_platform_init(void) musb_cfg.extvbus =omap3_evm_need_extvbus ();#endif -#ifdef CONFIG_OMAP4430 +#ifdef CONFIG_OMAP44XX u32 *usbotghs_control = (u32 *)((*ctrl)->control_usbotghs_ctrl); *usbotghs_control =0x15 ;include/configs/kc1.h +0
-5@@ -24,11 +24,6 @@#define CONFIG_SYS_PL310_BASE 0x48242000/* -* Platform -*/ -#define CONFIG_OMAP4430 - -/* * Board */ include/configs/ti_omap4_common.h +0
-4@@ -12,10 +12,6 @@#ifndef __CONFIG_TI_OMAP4_COMMON_H #define __CONFIG_TI_OMAP4_COMMON_H -/* -* High Level Configuration Options -*/ -#define CONFIG_OMAP4430 1/* which is in a 4430 */ #define CONFIG_MISC_INIT_R #ifndef
CONFIG_SYS_L2CACHE_OFFscripts/config_whitelist.txt +0
-1@@ -1992,7 +1992,6 @@ CONFIG_OMAP3_MICRON_DDR CONFIG_OMAP3_RX51 CONFIG_OMAP3_SPI_D0_D1_SWAPPED CONFIG_OMAP3_ZOOM1 -CONFIG_OMAP4430 CONFIG_OMAP_EHCI_PHY1_RESET_GPIO CONFIG_OMAP_EHCI_PHY2_RESET_GPIO CONFIG_OMAP_EHCI_PHY3_RESET_GPIO
Signature · 14 lines
Paul Kocialkowski, developer of free digital technology and hardware support. Website: https://www.paulk.fr/ Coding blog: https://code.paulk.fr/ Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/ -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: This is a digitally signed message part URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170730/3f3fd398/attachment.sig>
PATCH 7/17 omap3: Drop unused CONFIG_OMAP3_xxx board defines
In reply to Tom RiniWe no longer have a need for a per-board CONFIG_OMAP3_xxx define (we have CONFIG_TARGET_xxx when this is required), so drop these unused references.
Signed-off-by Tom Rini <[email protected]>
--- include/configs/am3517_crane.h | 2 -- include/configs/devkit8000.h | 1 - include/configs/mcx.h | 1 - include/configs/nokia_rx51.h | 1 - include/configs/omap3_zoom1.h | 5 ----- scripts/config_whitelist.txt | 5 ----- 6 files changed, 15 deletions(-)
include/configs/am3517_crane.h +0 -2
@@ -16,8 +16,6 @@/* * High Level Configuration Options */ -#define CONFIG_OMAP3_AM3517CRANE 1/* working with CRANEBOARD */ -#define CONFIG_EMIF4 /* The chip has EMIF4 controller */ #include <asm/arch/cpu.h> /* get chip and board defs */
include/configs/devkit8000.h +0 -1
@@ -16,7 +16,6 @@#define __CONFIG_H/* High Level Configuration Options */ -#define CONFIG_OMAP3_DEVKIT8000 1/* working with DevKit8000 */ #define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT8000/*
include/configs/mcx.h +0 -1
@@ -12,7 +12,6 @@/* * High Level Configuration Options */ -#define CONFIG_OMAP3_MCX /* working with mcx */ #define CONFIG_OMAP_GPIO #define CONFIG_MACH_TYPE MACH_TYPE_MCX
include/configs/nokia_rx51.h +0 -1
@@ -22,7 +22,6 @@/* * High Level Configuration Options */ -#define CONFIG_OMAP3_RX51 /* working with RX51 */ #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ #define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
include/configs/omap3_zoom1.h +0 -5
@@ -13,11 +13,6 @@#ifndef __CONFIG_H#define __CONFIG_H -/* -* High Level Configuration Options -*/ -#define CONFIG_OMAP3_ZOOM1 1/* working with Zoom MDK Rev1 */ -#define CONFIG_NAND #define CONFIG_NR_DRAM_BANKS 2/* CS1 may or may not be populated */ #include <asm/arch/cpu.h> /* get chip and board defs */
scripts/config_whitelist.txt +0 -5
@@ -1979,19 +1979,14 @@ CONFIG_OF_SPI CONFIG_OF_SPI_FLASH CONFIG_OF_STDOUT_PATH CONFIG_OF_SUPPORT_OLD_DEVICE_TREES -CONFIG_OMAP3_AM3517CRANE -CONFIG_OMAP3_DEVKIT8000 CONFIG_OMAP3_GPIO_2 CONFIG_OMAP3_GPIO_3 CONFIG_OMAP3_GPIO_4 CONFIG_OMAP3_GPIO_5 CONFIG_OMAP3_GPIO_6 CONFIG_OMAP3_LOGIC_USE_NEW_PRODUCT_ID -CONFIG_OMAP3_MCX CONFIG_OMAP3_MICRON_DDR -CONFIG_OMAP3_RX51 CONFIG_OMAP3_SPI_D0_D1_SWAPPED -CONFIG_OMAP3_ZOOM1 CONFIG_OMAP_EHCI_PHY1_RESET_GPIO CONFIG_OMAP_EHCI_PHY2_RESET_GPIO CONFIG_OMAP_EHCI_PHY3_RESET_GPIO
Signature · 1 line
1.9.1
PATCH 7/17 omap3: Drop unused CONFIG_OMAP3_xxx board defines
Quoted 5 lines · Tom Rini
We no longer have a need for a per-board
CONFIG_OMAP3_xxxdefine (we haveCONFIG_TARGET_xxxwhen this is required), so drop these unused references.Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/2f213287/attachment.sig>
PATCH 8/17 gpio: Move OMAP_GPIO to Kconfig
In reply to Tom RiniThis driver is used often enough such that we want to have this enabled by default on any ARCH_OMAP2PLUS board, and this only compiles on ARCH_OMAP2PLUS due to required defines, so mark that as the depends.
Signed-off-by Tom Rini <[email protected]>
--- drivers/gpio/Kconfig | 8 ++++++++ include/configs/am3517_evm.h | 3 --- include/configs/bur_am335x_common.h | 2 -- include/configs/cm_t35.h | 1 - include/configs/cm_t3517.h | 2 -- include/configs/kc1.h | 6 ------ include/configs/mcx.h | 1 - include/configs/nokia_rx51.h | 1 - include/configs/omap3_evm.h | 1 - include/configs/siemens-am33x-common.h | 4 ---- include/configs/sniper.h | 2 -- include/configs/tam3517-common.h | 1 - include/configs/tao3530.h | 1 - include/configs/ti814x_evm.h | 2 -- include/configs/ti816x_evm.h | 1 - include/configs/ti_armv7_omap.h | 3 --- include/configs/tricorder.h | 3 --- scripts/config_whitelist.txt | 1 - 18 files changed, 8 insertions(+), 35 deletions(-)
drivers/gpio/Kconfig +8 -0
@@ -95,6 +95,14 @@ config MSM_GPIO - APQ8016 - MSM8916 +config OMAP_GPIO + bool "TI OMAP GPIO driver" + depends on ARCH_OMAP2PLUS + default y + help + Support GPIO controllers on the TI OMAP3/4/5 and related (such as + AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs. + config PM8916_GPIO bool "Qualcomm PM8916 PMIC GPIO/keypad driver" depends on DM_GPIO && PMIC_PM8916
include/configs/am3517_evm.h +0 -3
@@ -45,9 +45,6 @@/* Hardware drivers */ -/* OMAP GPIO configuration */ -#define CONFIG_OMAP_GPIO -/* NS16550 Configuration */ #define V_NS16550_CLK 48000000/* 48MHz (APLL96/2) */ #define CONFIG_SYS_NS16550_SERIAL
include/configs/bur_am335x_common.h +0 -2
@@ -75,8 +75,6 @@#define CONFIG_SYS_OMAP24_I2C_SPEED 100000#define CONFIG_SYS_OMAP24_I2C_SLAVE 1#define CONFIG_SYS_I2C_OMAP24XX -/* GPIO */ -#define CONFIG_OMAP_GPIO /* * Our platforms make use of SPL to initalize the hardware (primarily
include/configs/cm_t35.h +0 -1
@@ -22,7 +22,6 @@/* * High Level Configuration Options */ -#define CONFIG_OMAP_GPIO #define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */ #define CONFIG_SDRC /* The chip has SDRC controller */
include/configs/cm_t3517.h +0 -2
@@ -79,8 +79,6 @@#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} -#define CONFIG_OMAP_GPIO -/* USB */ #define CONFIG_USB_MUSB_AM35X
include/configs/kc1.h +0 -6
@@ -54,12 +54,6 @@#define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE)/* -* GPIO -*/ - -#define CONFIG_OMAP_GPIO - -/* * I2C */
include/configs/mcx.h +0 -1
@@ -12,7 +12,6 @@/* * High Level Configuration Options */ -#define CONFIG_OMAP_GPIO #define CONFIG_MACH_TYPE MACH_TYPE_MCX
include/configs/nokia_rx51.h +0 -1
@@ -125,7 +125,6 @@#define CONFIG_TWL4030_LED #define CONFIG_TWL4030_KEYPAD -#define CONFIG_OMAP_GPIO #define GPIO_SLIDE 71/*
include/configs/omap3_evm.h +0 -1
@@ -83,7 +83,6 @@/* * High level configuration options */ -#define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* The chip has SDRC controller */
include/configs/siemens-am33x-common.h +0 -4
@@ -547,10 +547,6 @@#endif #endif -#define CONFIG_OMAP_GPIO - -/* Gpio cmd support */ -/* Watchdog */ #define CONFIG_HW_WATCHDOG
include/configs/sniper.h +0 -2
@@ -58,8 +58,6 @@/* * GPIO */ - -#define CONFIG_OMAP_GPIO #define CONFIG_OMAP3_GPIO_2 #define CONFIG_OMAP3_GPIO_3 #define CONFIG_OMAP3_GPIO_4
include/configs/tam3517-common.h +0 -1
@@ -13,7 +13,6 @@/* * High Level Configuration Options */ -#define CONFIG_OMAP_GPIO #define CONFIG_SYS_TEXT_BASE 0x80008000
include/configs/tao3530.h +0 -1
@@ -16,7 +16,6 @@/* * High Level Configuration Options */ -#define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* Has an SDRC controller */
include/configs/ti814x_evm.h +0 -2
@@ -109,8 +109,6 @@#define CONFIG_SYS_LOAD_ADDR 0x81000000/* Default */ -#define CONFIG_OMAP_GPIO -/** * Physical Memory Map */
include/configs/ti816x_evm.h +0 -1
@@ -49,7 +49,6 @@#define CONFIG_SYS_LOAD_ADDR 0x81000000/* Default load address */ #define CONFIG_CMD_ASKENV -#define CONFIG_OMAP_GPIO #define CONFIG_FS_FAT
include/configs/ti_armv7_omap.h +0 -3
@@ -20,9 +20,6 @@/* SPI IP Block */ #define CONFIG_OMAP3_SPI -/* GPIO block */ -#define CONFIG_OMAP_GPIO -/* * GPMC NAND block. We support 1 device and the physical address to * access CS0 at is 0x8000000.
include/configs/tricorder.h +0 -3
@@ -46,9 +46,6 @@/* Hardware drivers */ -/* GPIO support */ -#define CONFIG_OMAP_GPIO -/* GPIO banks */ #define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 are in GPIO bank 2 */
scripts/config_whitelist.txt +0 -1
@@ -1990,7 +1990,6 @@ CONFIG_OMAP3_SPI_D0_D1_SWAPPED CONFIG_OMAP_EHCI_PHY1_RESET_GPIO CONFIG_OMAP_EHCI_PHY2_RESET_GPIO CONFIG_OMAP_EHCI_PHY3_RESET_GPIO -CONFIG_OMAP_GPIO CONFIG_OMAP_USB2PHY2_HOST CONFIG_OMAP_USB3PHY1_HOST CONFIG_OMAP_USB_PHY
Signature · 1 line
1.9.1
PATCH 8/17 gpio: Move OMAP_GPIO to Kconfig
Quoted 5 lines · Tom Rini
This driver is used often enough such that we want to have this enabled by default on any
ARCH_OMAP2PLUSboard, and this only compiles onARCH_OMAP2PLUSdue to required defines, so mark that as the depends.Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/3e2c5e54/attachment.sig>
PATCH 9/17 omap3: Migrate CONFIG_OMAP3_GPIO_X to Kconfig
In reply to Tom RiniThe symbols CONFIG_OMAP3_GPIO_X control if we enable the clocks for a given GPIO bank in U-Boot. select the required banks for each target. In some cases we need to also migrate from CONFIG_USB_EHCI (deprecated, in include/configs/) to CONFIG_USB_EHCI_HCD as we only require the GPIO bank to be enabled if USB is also enabled.
Signed-off-by Tom Rini <[email protected]>
--- arch/arm/mach-omap2/omap3/Kconfig | 54 +++++++++++++++++++++++++++++++++++++++ configs/eco5pk_defconfig | 1 + configs/mcx_defconfig | 1 + configs/mt_ventoux_defconfig | 1 + configs/twister_defconfig | 1 + include/configs/cm_t35.h | 7 ----- include/configs/cm_t3517.h | 7 ----- include/configs/mcx.h | 3 --- include/configs/mt_ventoux.h | 1 - include/configs/omap3_beagle.h | 4 --- include/configs/omap3_igep00x0.h | 5 ---- include/configs/omap3_logic.h | 4 --- include/configs/omap3_overo.h | 7 ----- include/configs/omap3_pandora.h | 4 --- include/configs/sniper.h | 9 ------- include/configs/tam3517-common.h | 2 -- include/configs/tao3530.h | 7 ----- include/configs/tricorder.h | 5 ---- include/configs/twister.h | 3 --- scripts/config_whitelist.txt | 5 ---- 20 files changed, 58 insertions(+), 73 deletions(-)
arch/arm/mach-omap2/omap3/Kconfig +54 -0
@@ -1,5 +1,21 @@ if OMAP34XX +# We only enable the clocks for the GPIO banks that a given board requies. +config OMAP3_GPIO_2 + bool + +config OMAP3_GPIO_3 + bool + +config OMAP3_GPIO_4 + bool + +config OMAP3_GPIO_5 + bool + +config OMAP3_GPIO_6 + bool + choice prompt "OMAP3 board select" optional
@@ -9,18 +25,28 @@ config TARGET_AM3517_EVM config TARGET_MT_VENTOUX bool "TeeJet Mt.Ventoux" + select OMAP3_GPIO_4 + select OMAP3_GPIO_5 if USB_EHCI_HCD config TARGET_OMAP3_BEAGLE bool "TI OMAP3 BeagleBoard" select DM select DM_SERIAL select DM_GPIO + select OMAP3_GPIO_5 + select OMAP3_GPIO_6 config TARGET_CM_T35 bool "CompuLab CM-T3530 and CM-T3730 boards" + select OMAP3_GPIO_2 + select OMAP3_GPIO_5 + select OMAP3_GPIO_6 if LED_STATUS config TARGET_CM_T3517 bool "CompuLab CM-T3517 boards" + select OMAP3_GPIO_2 + select OMAP3_GPIO_5 + select OMAP3_GPIO_6 if LED_STATUS config TARGET_DEVKIT8000 bool "TimLL OMAP3 Devkit8000"
@@ -36,12 +62,20 @@ config TARGET_OMAP3_IGEP00X0 select DM select DM_SERIAL select DM_GPIO + select OMAP3_GPIO_3 + select OMAP3_GPIO_5 + select OMAP3_GPIO_6 config TARGET_OMAP3_OVERO bool "OMAP35xx Gumstix Overo" select DM select DM_SERIAL select DM_GPIO + select OMAP3_GPIO_2 + select OMAP3_GPIO_3 + select OMAP3_GPIO_4 + select OMAP3_GPIO_5 + select OMAP3_GPIO_6 config TARGET_OMAP3_ZOOM1 bool "TI Zoom1"
@@ -54,16 +88,22 @@ config TARGET_AM3517_CRANE config TARGET_OMAP3_PANDORA bool "OMAP3 Pandora" + select OMAP3_GPIO_4 + select OMAP3_GPIO_6 config TARGET_ECO5PK bool "ECO5PK" + select OMAP3_GPIO_5 if USB_EHCI_HCD config TARGET_TRICORDER bool "Tricorder" + select OMAP3_GPIO_2 config TARGET_MCX bool "MCX" select BOARD_LATE_INIT + select OMAP3_GPIO_2 if USB_EHCI_HCD + select OMAP3_GPIO_5 if USB_EHCI_HCD config TARGET_OMAP3_LOGIC bool "OMAP3 Logic"
@@ -71,15 +111,24 @@ config TARGET_OMAP3_LOGIC select DM select DM_SERIAL select DM_GPIO + select OMAP3_GPIO_4 + select OMAP3_GPIO_6 config TARGET_NOKIA_RX51 bool "Nokia RX51" config TARGET_TAO3530 bool "TAO3530" + select OMAP3_GPIO_2 + select OMAP3_GPIO_3 + select OMAP3_GPIO_4 + select OMAP3_GPIO_5 + select OMAP3_GPIO_6 config TARGET_TWISTER bool "Twister" + select OMAP3_GPIO_2 + select OMAP3_GPIO_5 if USB_EHCI_HCD config TARGET_OMAP3_CAIRO bool "QUIPOS CAIRO"
@@ -92,6 +141,11 @@ config TARGET_SNIPER select DM select DM_SERIAL select DM_GPIO + select OMAP3_GPIO_2 + select OMAP3_GPIO_3 + select OMAP3_GPIO_4 + select OMAP3_GPIO_5 + select OMAP3_GPIO_6 endchoice
configs/eco5pk_defconfig +1 -0
@@ -24,5 +24,6 @@ CONFIG_CMD_UBI=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/mcx_defconfig +1 -0
@@ -33,6 +33,7 @@ CONFIG_CMD_UBI=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_ULPI_VIEWPORT_OMAP=y CONFIG_USB_ULPI=y CONFIG_USB_STORAGE=y
configs/mt_ventoux_defconfig +1 -0
@@ -29,6 +29,7 @@ CONFIG_CMD_UBI=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_ULPI_VIEWPORT_OMAP=y CONFIG_USB_ULPI=y CONFIG_USB_STORAGE=y
configs/twister_defconfig +1 -0
@@ -26,6 +26,7 @@ CONFIG_CMD_UBI=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_ULPI_VIEWPORT_OMAP=y CONFIG_USB_ULPI=y CONFIG_USB_STORAGE=y
include/configs/cm_t35.h +0 -7
@@ -246,14 +246,7 @@#define CONFIG_SPLASHIMAGE_GUARD -/* GPIO banks */ -#ifdef CONFIG_LED_STATUS -#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ -#endif -/* Display Configuration */ -#define CONFIG_OMAP3_GPIO_2 -#define CONFIG_OMAP3_GPIO_5 #define CONFIG_VIDEO_OMAP3 #define LCD_BPP LCD_COLOR16
include/configs/cm_t3517.h +0 -7
@@ -247,14 +247,7 @@/* Status LED */ #define GREEN_LED_GPIO 186/* CM-T3517 Green LED is GPIO186 */ -/* GPIO banks */ -#ifdef CONFIG_LED_STATUS -#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ -#endif -/* Display Configuration */ -#define CONFIG_OMAP3_GPIO_2 -#define CONFIG_OMAP3_GPIO_5 #define CONFIG_VIDEO_OMAP3 #define LCD_BPP LCD_COLOR16
include/configs/mcx.h +0 -3
@@ -73,9 +73,6 @@ 115200}/* EHCI */ -#define CONFIG_OMAP3_GPIO_2 -#define CONFIG_OMAP3_GPIO_5 -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 57#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/mt_ventoux.h +0 -1
@@ -24,7 +24,6 @@#define CONFIG_BOOTFILE "uImage"#define CONFIG_AUTO_COMPLETE -#define CONFIG_OMAP3_GPIO_4 #define CONFIG_HOSTNAME mt_ventoux/*
include/configs/omap3_beagle.h +0 -4
@@ -66,10 +66,6 @@#define CONFIG_USB_ETHER_MCS7830 #define CONFIG_USB_ETHER_SMSC95XX -/* GPIO banks */ -#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ -#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ -/* commands to include */ #define MTDIDS_DEFAULT "nand0=nand"
include/configs/omap3_igep00x0.h +0 -5
@@ -37,11 +37,6 @@#endif #endif -/* GPIO banks */ -#define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */ -#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ -#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ -/* USB */ #define CONFIG_USB_MUSB_UDC 1#define CONFIG_USB_OMAP3 1
include/configs/omap3_logic.h +0 -4
@@ -49,10 +49,6 @@/* Hardware drivers */ -/* GPIO banks */ -#define CONFIG_OMAP3_GPIO_4 /* GPIO 96..128 is in GPIO bank 4 */ -#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ -#define CONFIG_USB_OMAP3 /* commands to include */
include/configs/omap3_overo.h +0 -7
@@ -45,13 +45,6 @@#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 -/* Initialize GPIOs by default */ -#define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 is in GPIO Bank 2 */ -#define CONFIG_OMAP3_GPIO_3 /* GPIO64..95 is in GPIO Bank 3 */ -#define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO Bank 4 */ -#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO Bank 5 */ -#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO Bank 6 */ -/* commands to include */ #ifdef CONFIG_NAND
include/configs/omap3_pandora.h +0 -4
@@ -35,10 +35,6 @@/* TWL4030 LED */ #define CONFIG_TWL4030_LED -/* Initialize GPIOs by default */ -#define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO Bank 4 */ -#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO Bank 6 */ -/* * NS16550 Configuration */
include/configs/sniper.h +0 -9
@@ -56,15 +56,6 @@#define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE)/* -* GPIO -*/ -#define CONFIG_OMAP3_GPIO_2 -#define CONFIG_OMAP3_GPIO_3 -#define CONFIG_OMAP3_GPIO_4 -#define CONFIG_OMAP3_GPIO_5 -#define CONFIG_OMAP3_GPIO_6 - -/* * I2C */
include/configs/tam3517-common.h +0 -2
@@ -67,8 +67,6 @@#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200}/* EHCI */ -#define CONFIG_OMAP3_GPIO_5 -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 25#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/tao3530.h +0 -7
@@ -61,13 +61,6 @@/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -/* GPIO banks */ -#define CONFIG_OMAP3_GPIO_2 /* GPIO32 ..63 is in GPIO bank 2 */ -#define CONFIG_OMAP3_GPIO_3 /* GPIO64 ..95 is in GPIO bank 3 */ -#define CONFIG_OMAP3_GPIO_4 /* GPIO96 ..127 is in GPIO bank 4 */ -#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ -#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ -/* commands to include */ #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
include/configs/tricorder.h +0 -5
@@ -46,11 +46,6 @@/* Hardware drivers */ -/* GPIO banks */ -#define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 are in GPIO bank 2 */ - -/* LED support */ -/* NS16550 Configuration */ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4)
include/configs/twister.h +0 -3
@@ -45,7 +45,4 @@#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100)#define CONFIG_SPL_BOARD_INIT -/* gpio 55 is used as SPL_OS_BOOT_KEY */ -#define CONFIG_OMAP3_GPIO_2 -#endif /* __CONFIG_H */
scripts/config_whitelist.txt +0 -5
@@ -1979,11 +1979,6 @@ CONFIG_OF_SPI CONFIG_OF_SPI_FLASH CONFIG_OF_STDOUT_PATH CONFIG_OF_SUPPORT_OLD_DEVICE_TREES -CONFIG_OMAP3_GPIO_2 -CONFIG_OMAP3_GPIO_3 -CONFIG_OMAP3_GPIO_4 -CONFIG_OMAP3_GPIO_5 -CONFIG_OMAP3_GPIO_6 CONFIG_OMAP3_LOGIC_USE_NEW_PRODUCT_ID CONFIG_OMAP3_MICRON_DDR CONFIG_OMAP3_SPI_D0_D1_SWAPPED
Signature · 1 line
1.9.1
PATCH 9/17 omap3: Migrate CONFIG_OMAP3_GPIO_X to Kconfig
Quoted 7 lines · Tom Rini
The symbols
CONFIG_OMAP3_GPIO_Xcontrol if we enable the clocks for a given GPIO bank in U-Boot. select the required banks for each target. In some cases we need to also migrate fromCONFIG_USB_EHCI(deprecated, ininclude/configs/) toCONFIG_USB_EHCI_HCDas we only require the GPIO bank to be enabled if USB is also enabled.Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/cd6bc88d/attachment.sig>
PATCH 10/17 omap: spi: Drop CONFIG_OMAP3_SPI_D0_D1_SWAPPED support
In reply to Tom RiniThis particular quirk is not enabled in any config files today. It does however exist and is handled correctly in device trees and via CONFIG_DM_SPI. So we drop the symbol now and add a comment to indicate that any (new) boards that require this quirk need to enable DM_SPI instead.
Signed-off-by Tom Rini <[email protected]>
--- drivers/spi/omap3_spi.c | 3 ++- scripts/config_whitelist.txt | 1 - 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/spi/omap3_spi.c +2 -1
@@ -568,7 +568,8 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, priv->freq = max_hz; priv->mode = mode; priv->wordlen = priv->slave.wordlen; -#ifdef CONFIG_OMAP3_SPI_D0_D1_SWAPPED +#if 0 +/* Please migrate to DM_SPI support for this feature. */ priv->pin_dir =MCSPI_PINDIR_D0_OUT_D1_IN ;#endif
scripts/config_whitelist.txt +0 -1
@@ -1981,7 +1981,6 @@ CONFIG_OF_STDOUT_PATH CONFIG_OF_SUPPORT_OLD_DEVICE_TREES CONFIG_OMAP3_LOGIC_USE_NEW_PRODUCT_ID CONFIG_OMAP3_MICRON_DDR -CONFIG_OMAP3_SPI_D0_D1_SWAPPED CONFIG_OMAP_EHCI_PHY1_RESET_GPIO CONFIG_OMAP_EHCI_PHY2_RESET_GPIO CONFIG_OMAP_EHCI_PHY3_RESET_GPIO
Signature · 1 line
1.9.1
PATCH 10/17 omap: spi: Drop CONFIG_OMAP3_SPI_D0_D1_SWAPPED support
Quoted 7 lines · Tom Rini
This particular quirk is not enabled in any config files today. It does however exist and is handled correctly in device trees and via
CONFIG_DM_SPI. So we drop the symbol now and add a comment to indicate that any (new) boards that require this quirk need to enableDM_SPIinstead.Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/371079a7/attachment.sig>
PATCH 11/17 watchdog: Migrate OMAP_WATCHDOG to Kconfig
In reply to Tom RiniMove this entry to Kconfig. As it is a hardware watchdog, select HW_WATCHDOG. While we could default to enabling this for all platforms, it is currently only enabled by default on AM33XX, so keep that logic today.
Cc Roger Meier <[email protected]>
Signed-off-by Tom Rini <[email protected]>
---
Note that 'rut' is in an odd place in that it undefines HW_WATCHDOG for SPL, but still defines CONFIG_SPL_WATCHDOG_SUPPORT. If there should be no watchdog support in SPL, the right thing to do would be to disable CONFIG_SPL_WATCHDOG_SUPPORT. This keeps, AFAICT, the status quo.
--- configs/brppt1_mmc_defconfig | 1 + configs/brppt1_nand_defconfig | 1 + configs/brppt1_spi_defconfig | 1 + configs/draco_defconfig | 1 + configs/etamin_defconfig | 1 + configs/pxm2_defconfig | 1 + configs/rastaban_defconfig | 1 + configs/thuban_defconfig | 1 + drivers/watchdog/Kconfig | 8 ++++++++ include/configs/brppt1.h | 3 --- include/configs/draco.h | 3 --- include/configs/etamin.h | 3 --- include/configs/pxm2.h | 3 --- include/configs/rastaban.h | 3 --- include/configs/rut.h | 4 ---- include/configs/siemens-am33x-common.h | 3 --- include/configs/thuban.h | 3 --- include/configs/ti_am335x_common.h | 4 ---- scripts/config_whitelist.txt | 1 - 19 files changed, 16 insertions(+), 30 deletions(-)
configs/brppt1_mmc_defconfig +1 -0
@@ -57,4 +57,5 @@ CONFIG_USB_MUSB_HOST=y CONFIG_USB_STORAGE=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_LCD=y +CONFIG_OMAP_WATCHDOG=y CONFIG_OF_LIBFDT=y
configs/brppt1_nand_defconfig +1 -0
@@ -57,4 +57,5 @@ CONFIG_USB_MUSB_HOST=y CONFIG_USB_STORAGE=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_LCD=y +CONFIG_OMAP_WATCHDOG=y CONFIG_OF_LIBFDT=y
configs/brppt1_spi_defconfig +1 -0
@@ -65,4 +65,5 @@ CONFIG_USB_MUSB_HOST=y CONFIG_USB_STORAGE=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_LCD=y +CONFIG_OMAP_WATCHDOG=y CONFIG_OF_LIBFDT=y
configs/draco_defconfig +1 -0
@@ -65,3 +65,4 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_G_DNL_MANUFACTURER="Siemens AG" CONFIG_G_DNL_VENDOR_NUM=0x0908 CONFIG_G_DNL_PRODUCT_NUM=0x02d2 +CONFIG_OMAP_WATCHDOG=y
configs/etamin_defconfig +1 -0
@@ -65,3 +65,4 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_G_DNL_MANUFACTURER="Siemens AG" CONFIG_G_DNL_VENDOR_NUM=0x0908 CONFIG_G_DNL_PRODUCT_NUM=0x02d2 +CONFIG_OMAP_WATCHDOG=y
configs/pxm2_defconfig +1 -0
@@ -72,3 +72,4 @@ CONFIG_G_DNL_PRODUCT_NUM=0x02d2 # CONFIG_VIDEO_SW_CURSOR is not set CONFIG_SYS_CONSOLE_BG_COL=0xff CONFIG_SYS_CONSOLE_FG_COL=0x00 +CONFIG_OMAP_WATCHDOG=y
configs/rastaban_defconfig +1 -0
@@ -65,3 +65,4 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_G_DNL_MANUFACTURER="Siemens AG" CONFIG_G_DNL_VENDOR_NUM=0x0908 CONFIG_G_DNL_PRODUCT_NUM=0x02d2 +CONFIG_OMAP_WATCHDOG=y
configs/thuban_defconfig +1 -0
@@ -65,3 +65,4 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_G_DNL_MANUFACTURER="Siemens AG" CONFIG_G_DNL_VENDOR_NUM=0x0908 CONFIG_G_DNL_PRODUCT_NUM=0x02d2 +CONFIG_OMAP_WATCHDOG=y
drivers/watchdog/Kconfig +8 -0
@@ -12,6 +12,14 @@ config BCM2835_WDT This provides basic infrastructure to support BCM2835/2836 watchdog hardware, with a max timeout of ~15secs. +config OMAP_WATCHDOG + bool "TI OMAP watchdog driver" + depends on ARCH_OMAP2PLUS + select HW_WATCHDOG + default y if AM33XX + help + Say Y here to enable the OMAP3+ watchdog driver. + config ULP_WATCHDOG bool "i.MX7ULP watchdog" help
include/configs/brppt1.h +0 -3
@@ -20,9 +20,6 @@#define CONFIG_LCD_DT_SIMPLEFB #define LCD_BPP LCD_COLOR32 -#define CONFIG_HW_WATCHDOG -#define CONFIG_OMAP_WATCHDOG -/* Bootcount using the RTC block */ #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000#define CONFIG_BOOTCOUNT_LIMIT
include/configs/draco.h +0 -3
@@ -45,9 +45,6 @@#define CONFIG_FACTORYSET -/* Watchdog */ -#define CONFIG_OMAP_WATCHDOG -/* Define own nand partitions */ #define CONFIG_ENV_OFFSET_REDUND 0x2E0000#define CONFIG_ENV_SIZE_REDUND 0x2000
include/configs/etamin.h +0 -3
@@ -116,9 +116,6 @@#define CONFIG_SYS_DCACHE_OFF #endif -/* Watchdog */ -#define CONFIG_OMAP_WATCHDOG -/* Define own nand partitions */ #define CONFIG_ENV_OFFSET_REDUND 0xB80000#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
include/configs/pxm2.h +0 -3
@@ -42,9 +42,6 @@#define CONFIG_FACTORYSET -/* Watchdog */ -#define CONFIG_OMAP_WATCHDOG -#ifndef CONFIG_SPL_BUILD /* Use common default */
include/configs/rastaban.h +0 -3
@@ -49,9 +49,6 @@#define CONFIG_FACTORYSET -/* Watchdog */ -#define CONFIG_OMAP_WATCHDOG -/* Define own nand partitions */ #define CONFIG_ENV_OFFSET_REDUND 0x2E0000#define CONFIG_ENV_SIZE_REDUND 0x2000
include/configs/rut.h +0 -4
@@ -110,10 +110,6 @@#endif /* CONFIG_SPL_BUILD */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_HW_WATCHDOG -#endif -#if defined(CONFIG_VIDEO )#define CONFIG_VIDEO_DA8XX #define CONFIG_SPLASH_SCREEN
include/configs/siemens-am33x-common.h +0 -3
@@ -547,9 +547,6 @@#endif #endif -/* Watchdog */ -#define CONFIG_HW_WATCHDOG -/* Reboot after 60 sec if bootcmd fails */ #define CONFIG_RESET_TO_RETRY #define CONFIG_BOOT_RETRY_TIME 60
include/configs/thuban.h +0 -3
@@ -42,9 +42,6 @@#define CONFIG_FACTORYSET -/* Watchdog */ -#define CONFIG_OMAP_WATCHDOG -/* Define own nand partitions */ #define CONFIG_ENV_OFFSET_REDUND 0x2E0000#define CONFIG_ENV_SIZE_REDUND 0x2000
include/configs/ti_am335x_common.h +0 -4
@@ -47,10 +47,6 @@*/ #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 -/* Enable the HW watchdog, since we can use this with bootcount */ -#define CONFIG_HW_WATCHDOG -#define CONFIG_OMAP_WATCHDOG -/* * SPL related defines. The Public RAM memory map the ROM defines the * area between 0x402F0400 and 0x4030B800 as a download area and
scripts/config_whitelist.txt +0 -1
@@ -1988,7 +1988,6 @@ CONFIG_OMAP_USB2PHY2_HOST CONFIG_OMAP_USB3PHY1_HOST CONFIG_OMAP_USB_PHY CONFIG_OMAP_VC_I2C_HS_MCODE -CONFIG_OMAP_WATCHDOG CONFIG_OPTREX_BW CONFIG_ORIGEN CONFIG_OS1_ENV_ADDR
Signature · 1 line
1.9.1
PATCH 11/17 watchdog: Migrate OMAP_WATCHDOG to Kconfig
Quoted 7 lines · Tom Rini
Move this entry to
Kconfig. As it is a hardware watchdog, selectHW_WATCHDOG. While we could default to enabling this for all platforms, it is currently only enabled by default on AM33XX, so keep that logic today.Cc Roger Meier <[email protected]>Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/449cd295/attachment.sig>
PATCH 12/17 omap: Drop CONFIG_OMAP_VC_I2C_HS_MCODE
In reply to Tom RiniThe symbol CONFIG_OMAP_VC_I2C_HS_MCODE always uses the default value. Restructure the comment and code such that if a need arises later to use another value we can address this then.
Signed-off-by Tom Rini <[email protected]>
--- arch/arm/mach-omap2/vc.c | 14 ++++---------- scripts/config_whitelist.txt | 1 - 2 files changed, 4 insertions(+), 11 deletions(-)
arch/arm/mach-omap2/vc.c +4 -10
@@ -19,14 +19,6 @@#include <asm/arch/sys_proto.h> #include <asm/arch/clock.h> -/* -* Define Master code if there are multiple masters on the I2C_SR bus. -* Normally not required -*/ -#ifndef CONFIG_OMAP_VC_I2C_HS_MCODE -#define CONFIG_OMAP_VC_I2C_HS_MCODE 0x0 -#endif -/* Register defines and masks for VC IP Block */ /* PRM_VC_CFG_I2C_MODE */ #define PRM_VC_CFG_I2C_MODE_DFILTEREN_BIT (0x1 << 6)
@@ -84,8 +76,10 @@ static void omap_vc_init(u16 speed_khz) (cycles_low <<PRM_VC_CFG_I2C_CLK_SCLL_SHIFT );writel (val, (*prcm)->prm_vc_cfg_i2c_clk); - val =CONFIG_OMAP_VC_I2C_HS_MCODE << -PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT ; +/* +* Master code if there are multiple masters on the I2C_SR bus. +*/ + val =0x0 <<PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT ;/* No HS mode for now */ val &= ~PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT ;writel (val, (*prcm)->prm_vc_cfg_i2c_mode);
scripts/config_whitelist.txt +0 -1
@@ -1987,7 +1987,6 @@ CONFIG_OMAP_EHCI_PHY3_RESET_GPIO CONFIG_OMAP_USB2PHY2_HOST CONFIG_OMAP_USB3PHY1_HOST CONFIG_OMAP_USB_PHY -CONFIG_OMAP_VC_I2C_HS_MCODE CONFIG_OPTREX_BW CONFIG_ORIGEN CONFIG_OS1_ENV_ADDR
Signature · 1 line
1.9.1
PATCH 12/17 omap: Drop CONFIG_OMAP_VC_I2C_HS_MCODE
Quoted 5 lines · Tom Rini
The symbol
CONFIG_OMAP_VC_I2C_HS_MCODEalways uses the default value. Restructure the comment and code such that if a need arises later to use another value we can address this then.Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/3e5250e9/attachment.sig>
PATCH 13/17 whitelist: Drop more unused OMAP symbols
In reply to Tom RiniThe symbol CONFIG_OMAP3_LOGIC_USE_NEW_PRODUCT_ID was recently dropped from usage and CONFIG_OMAP3_MICRON_DDR is unused in code.
Signed-off-by Tom Rini <[email protected]>
--- include/configs/tam3517-common.h | 1 - scripts/config_whitelist.txt | 2 -- 2 files changed, 3 deletions(-)
include/configs/tam3517-common.h +0 -1
@@ -41,7 +41,6 @@/* * DDR related */ -#define CONFIG_OMAP3_MICRON_DDR /* Micron DDR */ #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024)/*
scripts/config_whitelist.txt +0 -2
@@ -1979,8 +1979,6 @@ CONFIG_OF_SPI CONFIG_OF_SPI_FLASH CONFIG_OF_STDOUT_PATH CONFIG_OF_SUPPORT_OLD_DEVICE_TREES -CONFIG_OMAP3_LOGIC_USE_NEW_PRODUCT_ID -CONFIG_OMAP3_MICRON_DDR CONFIG_OMAP_EHCI_PHY1_RESET_GPIO CONFIG_OMAP_EHCI_PHY2_RESET_GPIO CONFIG_OMAP_EHCI_PHY3_RESET_GPIO
Signature · 1 line
1.9.1
PATCH 13/17 whitelist: Drop more unused OMAP symbols
Quoted 4 lines · Tom Rini
The symbol
CONFIG_OMAP3_LOGIC_USE_NEW_PRODUCT_IDwas recently dropped from usage andCONFIG_OMAP3_MICRON_DDRis unused in code.Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/3512bcf2/attachment.sig>
PATCH 14/17 Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD
In reply to Tom RiniIn order to be able to migrate the various SoC EHCI CONFIG options we first need to finish the switch from CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD.
Cc Marek Vasut <[email protected]>
Signed-off-by Tom Rini <[email protected]>
--- arch/arm/include/asm/arch-mx7ulp/clock.h | 2 +- arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c | 2 +- arch/arm/mach-uniphier/clk/clk-ld11.c | 2 +- arch/arm/mach-uniphier/clk/clk-ld4.c | 2 +- arch/arm/mach-uniphier/clk/clk-pro4.c | 2 +- board/atmel/at91sam9x5ek/at91sam9x5ek.c | 2 +- board/compulab/cm_t54/cm_t54.c | 2 +- board/gumstix/duovero/duovero.c | 4 ++-- board/htkw/mcx/mcx.c | 4 ++-- board/overo/overo.c | 6 +++--- board/technexion/tao3530/tao3530.c | 4 ++-- board/technexion/twister/twister.c | 4 ++-- board/teejet/mt_ventoux/mt_ventoux.c | 4 ++-- board/ti/beagle/beagle.c | 6 +++--- board/ti/omap5_uevm/evm.c | 6 +++--- board/ti/panda/panda.c | 4 ++-- common/usb_storage.c | 2 +- drivers/usb/host/Kconfig | 6 ------ drivers/usb/host/Makefile | 2 +- include/configs/B4860QDS.h | 4 ++-- include/configs/BSC9131RDB.h | 4 ++-- include/configs/BSC9132QDS.h | 4 ++-- include/configs/M52277EVB.h | 2 +- include/configs/MPC8315ERDB.h | 2 +- include/configs/MPC8349ITX.h | 2 +- include/configs/MPC837XEMDS.h | 2 +- include/configs/MPC837XERDB.h | 2 +- include/configs/MPC8536DS.h | 4 ++-- include/configs/MPC8544DS.h | 4 ++-- include/configs/MPC8572DS.h | 4 ++-- include/configs/P1010RDB.h | 6 +++--- include/configs/P1022DS.h | 4 ++-- include/configs/P1023RDB.h | 4 ++-- include/configs/P2041RDB.h | 2 +- include/configs/T102xQDS.h | 2 +- include/configs/T102xRDB.h | 2 +- include/configs/T1040QDS.h | 4 ++-- include/configs/T104xRDB.h | 4 ++-- include/configs/T208xQDS.h | 4 ++-- include/configs/T208xRDB.h | 4 ++-- include/configs/T4240QDS.h | 2 +- include/configs/T4240RDB.h | 2 +- include/configs/UCP1020.h | 4 ++-- include/configs/advantech_dms-ba16.h | 2 +- include/configs/alt.h | 2 +- include/configs/apalis-tk1.h | 2 +- include/configs/apalis_t30.h | 2 +- include/configs/aristainetos-common.h | 2 +- include/configs/at91sam9x5ek.h | 4 ++-- include/configs/beaver.h | 2 +- include/configs/cardhu.h | 2 +- include/configs/cei-tk1-som.h | 2 +- include/configs/cgtqmx6eval.h | 2 +- include/configs/cm_t35.h | 2 +- include/configs/cm_t3517.h | 2 +- include/configs/cm_t54.h | 2 +- include/configs/colibri_t20.h | 2 +- include/configs/colibri_t30.h | 2 +- include/configs/colibri_vf.h | 2 +- include/configs/controlcenterd.h | 2 +- include/configs/corenet_ds.h | 2 +- include/configs/corvus.h | 2 +- include/configs/cyrus.h | 2 +- include/configs/dalmore.h | 2 +- include/configs/ds414.h | 2 +- include/configs/duovero.h | 2 +- include/configs/e2220-1170.h | 2 +- include/configs/eco5pk.h | 2 +- include/configs/edminiv2.h | 2 +- include/configs/embestmx6boards.h | 2 +- include/configs/exynos5250-common.h | 2 +- include/configs/ge_bx50v3.h | 2 +- include/configs/gose.h | 2 +- include/configs/gplugd.h | 2 +- include/configs/gw_ventana.h | 2 +- include/configs/harmony.h | 2 +- include/configs/jetson-tk1.h | 2 +- include/configs/koelsch.h | 2 +- include/configs/lager.h | 2 +- include/configs/liteboard.h | 2 +- include/configs/ls1012aqds.h | 2 +- include/configs/ls1021aqds.h | 2 +- include/configs/ls1021atwr.h | 2 +- include/configs/lwmon5.h | 2 +- include/configs/m53evk.h | 2 +- include/configs/ma5d4evk.h | 2 +- include/configs/mccmon6.h | 2 +- include/configs/medcom-wide.h | 2 +- include/configs/mpc5121ads.h | 2 +- include/configs/mv-common.h | 2 +- include/configs/mx35pdk.h | 2 +- include/configs/mx51evk.h | 2 +- include/configs/mx53cx9020.h | 2 +- include/configs/mx53loco.h | 2 +- include/configs/mx6cuboxi.h | 2 +- include/configs/mx6qarm2.h | 2 +- include/configs/mx6qsabreauto.h | 2 +- include/configs/mx6sabresd.h | 2 +- include/configs/mx6slevk.h | 2 +- include/configs/mx6sxsabreauto.h | 2 +- include/configs/mx6sxsabresd.h | 2 +- include/configs/mx6ul_14x14_evk.h | 2 +- include/configs/mxs.h | 2 +- include/configs/nas220.h | 2 +- include/configs/nitrogen6x.h | 2 +- include/configs/novena.h | 2 +- include/configs/nyan-big.h | 2 +- include/configs/odroid.h | 2 +- include/configs/odroid_xu3.h | 2 +- include/configs/omap3_beagle.h | 2 +- include/configs/omap3_overo.h | 2 +- include/configs/omap4_panda.h | 2 +- include/configs/omap5_uevm.h | 2 +- include/configs/ot1200.h | 2 +- include/configs/p1_p2_rdb_pc.h | 4 ++-- include/configs/p1_twr.h | 4 ++-- include/configs/p2371-0000.h | 2 +- include/configs/p2371-2180.h | 2 +- include/configs/p2571.h | 2 +- include/configs/paz00.h | 2 +- include/configs/pico-imx6ul.h | 2 +- include/configs/picosam9g45.h | 2 +- include/configs/platinum.h | 2 +- include/configs/plutux.h | 2 +- include/configs/porter.h | 2 +- include/configs/sama5d2_ptc.h | 2 +- include/configs/seaboard.h | 2 +- include/configs/sequoia.h | 6 +++--- include/configs/silk.h | 2 +- include/configs/snapper9g45.h | 2 +- include/configs/stout.h | 2 +- include/configs/sun4i.h | 2 +- include/configs/sun50i.h | 2 +- include/configs/sun5i.h | 2 +- include/configs/sun6i.h | 2 +- include/configs/sun7i.h | 2 +- include/configs/sun8i.h | 2 +- include/configs/tao3530.h | 2 +- include/configs/tbs2910.h | 2 +- include/configs/tec-ng.h | 2 +- include/configs/tec.h | 2 +- include/configs/tegra-common-post.h | 4 ++-- include/configs/titanium.h | 2 +- include/configs/tqma6.h | 2 +- include/configs/trimslice.h | 2 +- include/configs/usbarmory.h | 2 +- include/configs/vct.h | 2 +- include/configs/venice2.h | 2 +- include/configs/ventana.h | 2 +- include/configs/vinco.h | 2 +- include/configs/vining_2000.h | 2 +- include/configs/wandboard.h | 2 +- include/configs/warp.h | 2 +- include/configs/whistler.h | 2 +- include/configs/x600.h | 2 +- include/configs/x86-common.h | 2 +- include/configs/xpedite550x.h | 2 +- include/configs/xpress.h | 2 +- include/configs/zmx25.h | 2 +- include/usb.h | 3 ++- 160 files changed, 193 insertions(+), 198 deletions(-)
arch/arm/include/asm/arch-mx7ulp/clock.h +1 -1
@@ -34,7 +34,7 @@ u32 imx_get_i2cclk(unsigned i2c_num);#ifdef CONFIG_MXC_OCOTP void enable_ocotp_clk (unsigned char enable);#endif -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD void enable_usboh3_clk (unsigned char enable);#endif void init_clk_usdhc (u32 index);
arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c +1 -1
@@ -161,7 +161,7 @@ void at91_spi1_hw_init(unsigned long cs_mask) }#endif -#if defined(CONFIG_USB_OHCI_NEW ) || defined(CONFIG_USB_EHCI ) +#if defined(CONFIG_USB_OHCI_NEW ) || defined(CONFIG_USB_EHCI_HCD )void at91_uhp_hw_init (void ) {/* Enable VBus on UHP ports */
arch/arm/mach-uniphier/clk/clk-ld11.c +1 -1
@@ -33,7 +33,7 @@ void uniphier_ld11_clk_init(void)/* TODO: use "mmc-pwrseq-emmc" */ writel (1 ,SDCTRL_EMMC_HW_RESET ); -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD {/* FIXME: the current clk driver can not handle parents */ u32 tmp;
arch/arm/mach-uniphier/clk/clk-ld4.c +1 -1
@@ -31,7 +31,7 @@ void uniphier_ld4_clk_init(void)#ifdef CONFIG_UNIPHIER_ETH tmp |=SC_CLKCTRL_CEN_ETHER ;#endif -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD tmp |=SC_CLKCTRL_CEN_MIO |SC_CLKCTRL_CEN_STDMAC ;#endif #ifdef CONFIG_NAND_DENALI
arch/arm/mach-uniphier/clk/clk-pro4.c +1 -1
@@ -46,7 +46,7 @@ void uniphier_pro4_clk_init(void)#ifdef CONFIG_UNIPHIER_ETH tmp |=SC_CLKCTRL_CEN_ETHER ;#endif -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD tmp |=SC_CLKCTRL_CEN_MIO |SC_CLKCTRL_CEN_STDMAC ;#endif #ifdef CONFIG_NAND_DENALI
board/atmel/at91sam9x5ek/at91sam9x5ek.c +1 -1
@@ -212,7 +212,7 @@ int board_init(void)at91sam9x5ek_nand_hw_init ();#endif -#if defined(CONFIG_USB_OHCI_NEW ) || defined(CONFIG_USB_EHCI ) +#if defined(CONFIG_USB_OHCI_NEW ) || defined(CONFIG_USB_EHCI_HCD )at91_uhp_hw_init ();#endif #ifdef CONFIG_LCD
board/compulab/cm_t54/cm_t54.c +1 -1
@@ -181,7 +181,7 @@ int board_eth_init(bd_t *bis) }#endif -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0 ] =OMAP_USBHS_PORT_MODE_UNUSED , .port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
board/gumstix/duovero/duovero.c +2 -2
@@ -24,7 +24,7 @@static void setup_net_chip (void );#endif -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #include <usb.h> #include <asm/arch/ehci.h> #include <asm/ehci-omap.h>
@@ -206,7 +206,7 @@ int board_eth_init(bd_t *bis)return rc; } -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
board/htkw/mcx/mcx.c +2 -2
@@ -19,7 +19,7 @@#include <asm/arch/clock.h> #include <errno.h> #include <i2c.h> -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #include <usb.h> #include <asm/ehci-omap.h> #endif
@@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR;/* Address of the framebuffer in RAM. */ #define FB_START_ADDRESS 0x88000000 -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0 ] =OMAP_EHCI_PORT_MODE_PHY , .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
board/overo/overo.c +3 -3
@@ -27,7 +27,7 @@#include <asm/mach-types.h> #include "overo.h" -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #include <usb.h> #include <asm/ehci-omap.h> #endif
@@ -393,7 +393,7 @@ void board_mmc_power_init(void) }#endif -#if defined(CONFIG_USB_EHCI ) +#if defined(CONFIG_USB_EHCI_HCD )static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0 ] =OMAP_USBHS_PORT_MODE_UNUSED , .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
@@ -420,4 +420,4 @@ int ehci_hcd_stop(void) return omap_ehci_hcd_stop(); } -#endif /* CONFIG_USB_EHCI */ +#endif /* CONFIG_USB_EHCI_HCD */
board/technexion/tao3530/tao3530.c +2 -2
@@ -195,7 +195,7 @@ void board_mmc_power_init(void) }#endif -#if defined(CONFIG_USB_EHCI ) && !defined(CONFIG_SPL_BUILD ) +#if defined(CONFIG_USB_EHCI_HCD ) && !defined(CONFIG_SPL_BUILD )/* Call usb_stop() before starting the kernel */ void show_boot_progress (int val) {
@@ -219,4 +219,4 @@ int ehci_hcd_stop(int index) {return omap_ehci_hcd_stop (); } -#endif /* CONFIG_USB_EHCI */ +#endif /* CONFIG_USB_EHCI_HCD */
board/technexion/twister/twister.c +2 -2
@@ -19,7 +19,7 @@#include <spl.h> #include <mmc.h> #include <asm/gpio.h> -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #include <usb.h> #include <asm/ehci-omap.h> #endif
@@ -46,7 +46,7 @@ static const u32 gpmc_XR16L2751[] = { XR16L2751_GPMC_CONFIG6, }; -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0 ] =OMAP_EHCI_PORT_MODE_PHY , .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
board/teejet/mt_ventoux/mt_ventoux.c +2 -2
@@ -23,7 +23,7 @@#include <i2c.h> #include <spartan3.h> #include <asm/gpio.h> -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #include <usb.h> #include <asm/ehci-omap.h> #endif
@@ -95,7 +95,7 @@ static const u32 gpmc_fpga[] = { FPGA_GPMC_CONFIG6, }; -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0 ] =OMAP_EHCI_PORT_MODE_PHY , .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
board/ti/beagle/beagle.c +3 -3
@@ -36,7 +36,7 @@#include "beagle.h" #include <command.h> -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #include <usb.h> #include <asm/ehci-omap.h> #endif
@@ -538,7 +538,7 @@ void board_mmc_power_init(void) }#endif -#if defined(CONFIG_USB_EHCI ) && !defined(CONFIG_SPL_BUILD ) +#if defined(CONFIG_USB_EHCI_HCD ) && !defined(CONFIG_SPL_BUILD )/* Call usb_stop() before starting the kernel */ void show_boot_progress (int val) {
@@ -563,7 +563,7 @@ int ehci_hcd_stop(int index) return omap_ehci_hcd_stop(); } -#endif /* CONFIG_USB_EHCI */ +#endif /* CONFIG_USB_EHCI_HCD */ #if defined(CONFIG_USB_ETHER ) && defined(CONFIG_USB_MUSB_GADGET )int board_eth_init (bd_t *bis)
board/ti/omap5_uevm/evm.c +3 -3
@@ -20,7 +20,7 @@#include "mux_data.h" -#if defined(CONFIG_USB_EHCI ) || defined(CONFIG_USB_XHCI_OMAP ) +#if defined(CONFIG_USB_EHCI_HCD ) || defined(CONFIG_USB_XHCI_OMAP )#include <sata.h> #include <usb.h> #include <asm/gpio.h>
@@ -151,7 +151,7 @@ int board_eth_init(bd_t *bis)return 0 ; } -#if defined(CONFIG_USB_EHCI ) || defined(CONFIG_USB_XHCI_OMAP ) +#if defined(CONFIG_USB_EHCI_HCD ) || defined(CONFIG_USB_XHCI_OMAP )static void enable_host_clocks (void ) {int auxclk;
@@ -220,7 +220,7 @@ int board_mmc_init(bd_t *bis) }#endif -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0 ] =OMAP_USBHS_PORT_MODE_UNUSED , .port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
board/ti/panda/panda.c +2 -2
@@ -15,7 +15,7 @@#include "panda_mux_data.h" -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #include <usb.h> #include <asm/arch/ehci.h> #include <asm/ehci-omap.h>
@@ -301,7 +301,7 @@ void board_mmc_power_init(void)#endif #endif -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
common/usb_storage.c +1 -1
@@ -100,7 +100,7 @@ struct us_data {trans_cmnd transport;/* transport routine */ }; -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD /* * The U-Boot EHCI driver can handle any transfer length as long as there is * enough free heap space left, but the SCSI READ(10) and WRITE(10) commands are
drivers/usb/host/Kconfig +0 -6
@@ -74,12 +74,6 @@ config USB_EHCI_HCD You may want to read <file:Documentation/usb/ehci.txt>. -config USB_EHCI - bool - default USB_EHCI_HCD - ---help--- - TODO: rename after most boards switch to Kconfig - if USB_EHCI_HCD config USB_EHCI_ATMEL
drivers/usb/host/Makefile +1 -1
@@ -24,7 +24,7 @@ obj-$(CONFIG_USB_OHCI_LPC32XX) += ohci-lpc32xx.o obj-$(CONFIG_USB_OHCI_GENERIC) += ohci-generic.o # echi -obj-$(CONFIG_USB_EHCI) += ehci-hcd.o +obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_EHCI_ARMADA100) += ehci-armada100.o utmi-armada100.o obj-$(CONFIG_USB_EHCI_ATMEL) += ehci-atmel.o ifdef CONFIG_MPC512X
include/configs/B4860QDS.h +2 -2
@@ -723,9 +723,9 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/BSC9131RDB.h +2 -2
@@ -334,9 +334,9 @@ extern unsigned long get_sdram_size(void);#define CONFIG_SHA_HW_ACCEL #endif -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #define CONFIG_HAS_FSL_DR_USB
include/configs/BSC9132QDS.h +2 -2
@@ -476,8 +476,8 @@ combinations. this should be removed later#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR#endif -#define CONFIG_USB_EHCI /* USB */ -#ifdef CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD /* USB */ +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #define CONFIG_HAS_FSL_DR_USB
include/configs/M52277EVB.h +1 -1
@@ -88,7 +88,7 @@/* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_SYS_USB_EHCI_REGS_BASE 0xFC0B0000#define CONFIG_SYS_USB_EHCI_CPU_INIT #endif
include/configs/MPC8315ERDB.h +1 -1
@@ -366,7 +366,7 @@#define CONFIG_HAS_FSL_DR_USB #define CONFIG_SYS_SCCR_USBDRCM 3 -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_USB_PHY_TYPE "utmi"#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/MPC8349ITX.h +1 -1
@@ -148,7 +148,7 @@/* * Support USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL /* Current USB implementation supports the only USB controller,
include/configs/MPC837XEMDS.h +1 -1
@@ -376,7 +376,7 @@ extern int board_pci_host_broken(void);#define CONFIG_PQ_MDS_PIB 1/* PQ MDS Platform IO Board */ #define CONFIG_HAS_FSL_DR_USB 1/* fixup device tree for the DR USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/MPC837XERDB.h +1 -1
@@ -651,7 +651,7 @@#define CONFIG_ENV_OVERWRITE #define CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/MPC8536DS.h +2 -2
@@ -609,9 +609,9 @@*/ #define CONFIG_HAS_FSL_MPH_USB #ifdef CONFIG_HAS_FSL_MPH_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #endif
include/configs/MPC8544DS.h +2 -2
@@ -359,9 +359,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);/* * USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_PCI #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_PCI_EHCI_DEVICE 0
include/configs/MPC8572DS.h +2 -2
@@ -559,9 +559,9 @@/* * USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_PCI #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_PCI_EHCI_DEVICE 0
include/configs/P1010RDB.h +3 -3
@@ -670,9 +670,9 @@ extern unsigned long get_sdram_size(void);#define CONFIG_HAS_FSL_DR_USB #if defined(CONFIG_HAS_FSL_DR_USB ) -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #endif
@@ -733,7 +733,7 @@ extern unsigned long get_sdram_size(void);#undef CONFIG_WATCHDOG/* watchdog disabled */ -#if defined(CONFIG_MMC ) || defined(CONFIG_USB_EHCI ) \ +#if defined(CONFIG_MMC ) || defined(CONFIG_USB_EHCI_HCD ) \ || defined(CONFIG_FSL_SATA )#endif
include/configs/P1022DS.h +2 -2
@@ -606,9 +606,9 @@*/ #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #endif
include/configs/P1023RDB.h +2 -2
@@ -253,9 +253,9 @@ extern unsigned long get_clock_freq(void);*/ #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #endif
include/configs/P2041RDB.h +1 -1
@@ -594,7 +594,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB ) || defined(CONFIG_HAS_FSL_MPH_USB ) -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/T102xQDS.h +1 -1
@@ -637,7 +637,7 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/T102xRDB.h +1 -1
@@ -641,7 +641,7 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/T1040QDS.h +2 -2
@@ -527,9 +527,9 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/T104xRDB.h +2 -2
@@ -637,9 +637,9 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg#define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/T208xQDS.h +2 -2
@@ -12,7 +12,7 @@#define __T208xQDS_H#define CONFIG_ICS307_REFCLK_HZ 25000000/* ICS307 ref clk freq */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #if defined(CONFIG_ARCH_T2080 )#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_SRIO /* Enable Serial RapidIO Support */
@@ -702,7 +702,7 @@ unsigned long get_board_ddr_clk(void);/* * USB */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB
include/configs/T208xRDB.h +2 -2
@@ -12,7 +12,7 @@#define __T2080RDB_H#define CONFIG_ICS307_REFCLK_HZ 25000000/* ICS307 ref clk freq */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_FSL_SATA_V2 /* High Level Configuration Options */
@@ -652,7 +652,7 @@ unsigned long get_board_ddr_clk(void);/* * USB */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB
include/configs/T4240QDS.h +1 -1
@@ -507,7 +507,7 @@ unsigned long get_board_ddr_clk(void);/* * USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB
include/configs/T4240RDB.h +1 -1
@@ -685,7 +685,7 @@ unsigned long get_board_ddr_clk(void);/* * USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB
include/configs/UCP1020.h +2 -2
@@ -453,11 +453,11 @@#define CONFIG_HAS_FSL_DR_USB #if defined(CONFIG_HAS_FSL_DR_USB ) -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #endif
include/configs/advantech_dms-ba16.h +1 -1
@@ -55,7 +55,7 @@#define CONFIG_BOUNCE_BUFFER /* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/alt.h +1 -1
@@ -81,7 +81,7 @@#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58/* da9063 */ /* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/apalis-tk1.h +1 -1
@@ -36,7 +36,7 @@#define CONFIG_SYS_MMC_ENV_PART 1/* USB host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* PCI host support */
include/configs/apalis_t30.h +1 -1
@@ -33,7 +33,7 @@#define CONFIG_SYS_MMC_ENV_PART 1/* USB host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* PCI host support */
include/configs/aristainetos-common.h +1 -1
@@ -202,7 +202,7 @@#define CONFIG_RTC_M41T11 /* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
include/configs/at91sam9x5ek.h +2 -2
@@ -51,7 +51,7 @@#define CONFIG_CMD_NAND /* -* define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0) +* define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0) * NB: in this case, USB 1.1 devices won't be recognized. */
@@ -99,7 +99,7 @@/* USB */ #ifdef CONFIG_CMD_USB -#ifndef CONFIG_USB_EHCI +#ifndef CONFIG_USB_EHCI_HCD #define CONFIG_USB_ATMEL #define CONFIG_USB_ATMEL_CLK_SEL_UPLL #define CONFIG_USB_OHCI_NEW
include/configs/beaver.h +1 -1
@@ -39,7 +39,7 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/cardhu.h +1 -1
@@ -43,7 +43,7 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/cei-tk1-som.h +1 -1
@@ -38,7 +38,7 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/cgtqmx6eval.h +1 -1
@@ -61,7 +61,7 @@#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08/* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER
include/configs/cm_t35.h +1 -1
@@ -75,7 +75,7 @@/* USB */ #define CONFIG_USB_OMAP3 -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_USB_MUSB_UDC #define CONFIG_TWL4030_USB
include/configs/cm_t3517.h +1 -1
@@ -84,7 +84,7 @@#ifndef CONFIG_USB_MUSB_AM35X #define CONFIG_USB_OMAP3 -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147
include/configs/cm_t54.h +1 -1
@@ -58,7 +58,7 @@#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN)/* USB UHH support options */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/colibri_t20.h +1 -1
@@ -25,7 +25,7 @@#define CONFIG_SYS_I2C_TEGRA /* USB host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
include/configs/colibri_t30.h +1 -1
@@ -33,7 +33,7 @@#define CONFIG_SYS_MMC_ENV_PART 1/* USB host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/colibri_vf.h +1 -1
@@ -191,7 +191,7 @@#endif /* USB Host Support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_VF #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/controlcenterd.h +1 -1
@@ -291,7 +291,7 @@/* * USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_HAS_FSL_DR_USB #define CONFIG_USB_EHCI_FSL
include/configs/corenet_ds.h +1 -1
@@ -608,7 +608,7 @@#define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB ) || defined(CONFIG_HAS_FSL_MPH_USB ) -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/corvus.h +1 -1
@@ -96,7 +96,7 @@#define CONFIG_AT91_WANTS_COMMON_PHY /* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
include/configs/cyrus.h +1 -1
@@ -426,7 +426,7 @@#define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB ) || defined(CONFIG_HAS_FSL_MPH_USB ) -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_EHCI_IS_TDI
include/configs/dalmore.h +1 -1
@@ -35,7 +35,7 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/ds414.h +1 -1
@@ -74,7 +74,7 @@#endif #if !defined(CONFIG_USB_XHCI_HCD ) -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MARVELL #define CONFIG_EHCI_IS_TDI #endif
include/configs/duovero.h +1 -1
@@ -25,7 +25,7 @@#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS /* USB UHH support options */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/e2220-1170.h +1 -1
@@ -33,7 +33,7 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB2.0 Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/eco5pk.h +1 -1
@@ -15,7 +15,7 @@#include "tam3517-common.h" -#undef CONFIG_USB_EHCI +#undef CONFIG_USB_EHCI_HCD#undef CONFIG_USB_EHCI_OMAP#undef CONFIG_USB_OMAP3
include/configs/edminiv2.h +1 -1
@@ -171,7 +171,7 @@* Common USB/EHCI configuration */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ +#define CONFIG_USB_EHCI_HCD /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_MARVELL #define ORION5X_USB20_HOST_PORT_BASE ORION5X_USB20_PORT0_BASE#define CONFIG_SUPPORT_VFAT
include/configs/embestmx6boards.h +1 -1
@@ -35,7 +35,7 @@#define CONFIG_SYS_I2C_SPEED 100000/* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/exynos5250-common.h +1 -1
@@ -26,7 +26,7 @@#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK/* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_EXYNOS #define CONFIG_USB_XHCI_EXYNOS
include/configs/ge_bx50v3.h +1 -1
@@ -68,7 +68,7 @@/* USB Configs */ #ifdef CONFIG_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/gose.h +1 -1
@@ -78,7 +78,7 @@#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58/* da9063 */ /* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/gplugd.h +1 -1
@@ -82,7 +82,7 @@#define CONFIG_ENV_SIZE 0x4000#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_ARMADA100 #define CONFIG_EHCI_IS_TDI #endif /* CONFIG_CMD_USB */
include/configs/gw_ventana.h +1 -1
@@ -156,7 +156,7 @@#define CONFIG_ARP_TIMEOUT 200UL/* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/harmony.h +1 -1
@@ -36,7 +36,7 @@#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K)/* 128K sector size */ /* USB Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/jetson-tk1.h +1 -1
@@ -34,7 +34,7 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/koelsch.h +1 -1
@@ -78,7 +78,7 @@#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58/* da9063 */ /* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/lager.h +1 -1
@@ -80,7 +80,7 @@#define CONFIG_SYS_TMU_CLK_DIV 4/* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
include/configs/liteboard.h +1 -1
@@ -137,7 +137,7 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/ls1012aqds.h +1 -1
@@ -115,7 +115,7 @@/*#define CONFIG_HAS_FSL_DR_USB*/ #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/ls1021aqds.h +1 -1
@@ -402,7 +402,7 @@ unsigned long get_board_ddr_clk(void);/*#define CONFIG_HAS_FSL_DR_USB*/ #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/ls1021atwr.h +1 -1
@@ -40,7 +40,7 @@/*#define CONFIG_HAS_FSL_DR_USB*/ #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/lwmon5.h +1 -1
@@ -362,7 +362,7 @@/* * USB/EHCI */ -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ +#define CONFIG_USB_EHCI_HCD /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_PPC4XX /* on PPC4xx platform */ #define CONFIG_SYS_PPC4XX_USB_ADDR 0xe0000300#define CONFIG_EHCI_MMIO_BIG_ENDIAN
include/configs/m53evk.h +1 -1
@@ -162,7 +162,7 @@* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/ma5d4evk.h +1 -1
@@ -102,7 +102,7 @@* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/mccmon6.h +1 -1
@@ -98,7 +98,7 @@"128k@0x19C0000(swupdate-kernel-dtb.nor)" /* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/medcom-wide.h +1 -1
@@ -29,7 +29,7 @@#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K)/* 128K sectors */ /* USB host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/mpc5121ads.h +1 -1
@@ -369,7 +369,7 @@*/ #if defined(CONFIG_CMD_USB ) -#define CONFIG_USB_EHCI /* Enable EHCI Support */ +#define CONFIG_USB_EHCI_HCD /* Enable EHCI Support */ #define CONFIG_USB_EHCI_FSL /* On a FSL platform */ #define CONFIG_EHCI_MMIO_BIG_ENDIAN /* With big-endian regs */ #define CONFIG_EHCI_DESC_BIG_ENDIAN
include/configs/mv-common.h +1 -1
@@ -121,7 +121,7 @@* Common USB/EHCI configuration */ #if defined(CONFIG_CMD_USB ) && !defined(CONFIG_DM ) -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ +#define CONFIG_USB_EHCI_HCD /* Enable EHCI USB support */ #define CONFIG_SUPPORT_VFAT #endif /* CONFIG_CMD_USB */
include/configs/mx35pdk.h +1 -1
@@ -199,7 +199,7 @@#define CONFIG_SYS_NAND_LARGEPAGE /* EHCI driver */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1#define CONFIG_EHCI_IS_TDI #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/mx51evk.h +1 -1
@@ -73,7 +73,7 @@#define CONFIG_FEC_MXC_PHYADDR 0x1F/* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/mx53cx9020.h +1 -1
@@ -45,7 +45,7 @@#define CONFIG_FEC_MXC_PHYADDR 0x1F/* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_STORAGE #define CONFIG_USB_HOST_ETHER
include/configs/mx53loco.h +1 -1
@@ -42,7 +42,7 @@#define CONFIG_FEC_MXC_PHYADDR 0x1F/* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/mx6cuboxi.h +1 -1
@@ -44,7 +44,7 @@#define CONFIG_IMX_VIDEO_SKIP /* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/mx6qarm2.h +1 -1
@@ -128,7 +128,7 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER
include/configs/mx6qsabreauto.h +1 -1
@@ -15,7 +15,7 @@#define CONFIG_MMCROOT "/dev/mmcblk0p2"/* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/mx6sabresd.h +1 -1
@@ -63,7 +63,7 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER
include/configs/mx6slevk.h +1 -1
@@ -159,7 +159,7 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER
include/configs/mx6sxsabreauto.h +1 -1
@@ -149,7 +149,7 @@#define CONFIG_PHY_ATHEROS #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER
include/configs/mx6sxsabresd.h +1 -1
@@ -167,7 +167,7 @@#define CONFIG_PHY_ATHEROS #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER
include/configs/mx6ul_14x14_evk.h +1 -1
@@ -186,7 +186,7 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/mxs.h +1 -1
@@ -168,7 +168,7 @@/* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MXS #define CONFIG_EHCI_IS_TDI #endif
include/configs/nas220.h +1 -1
@@ -94,7 +94,7 @@* USB/EHCI */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ +#define CONFIG_USB_EHCI_HCD /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ #define CONFIG_EHCI_IS_TDI #define CONFIG_SUPPORT_VFAT
include/configs/nitrogen6x.h +1 -1
@@ -74,7 +74,7 @@#define CONFIG_PHY_MICREL_KSZ9021 /* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/novena.h +1 -1
@@ -135,7 +135,7 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP #define CONFIG_USB_HOST_ETHER
include/configs/nyan-big.h +1 -1
@@ -39,7 +39,7 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/odroid.h +1 -1
@@ -188,7 +188,7 @@#define CONFIG_LIB_HW_RAND /* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_EXYNOS #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/odroid_xu3.h +1 -1
@@ -41,7 +41,7 @@#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"/* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_EXYNOS /* DFU */
include/configs/omap3_beagle.h +1 -1
@@ -55,7 +55,7 @@#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000/* USB EHCI */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147
include/configs/omap3_overo.h +1 -1
@@ -40,7 +40,7 @@#define CONFIG_TWL4030_LED /* USB EHCI */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/omap4_panda.h +1 -1
@@ -17,7 +17,7 @@*/ /* USB UHH support options */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/omap5_uevm.h +1 -1
@@ -52,7 +52,7 @@#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22/* USB UHH support options */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/ot1200.h +1 -1
@@ -55,7 +55,7 @@#define CONFIG_SYS_FSL_USDHC_NUM 2/* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/p1_p2_rdb_pc.h +2 -2
@@ -823,9 +823,9 @@#define CONFIG_HAS_FSL_DR_USB #if defined(CONFIG_HAS_FSL_DR_USB ) -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #endif
include/configs/p1_twr.h +2 -2
@@ -394,9 +394,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_HAS_FSL_DR_USB #if defined(CONFIG_HAS_FSL_DR_USB ) -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL #endif
include/configs/p2371-0000.h +1 -1
@@ -33,7 +33,7 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB2.0 Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/p2371-2180.h +1 -1
@@ -33,7 +33,7 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB2.0 Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/p2571.h +1 -1
@@ -34,7 +34,7 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB2.0 Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/paz00.h +1 -1
@@ -29,7 +29,7 @@#define CONFIG_SYS_MMC_ENV_PART 2/* USB Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/pico-imx6ul.h +1 -1
@@ -37,7 +37,7 @@#define CONFIG_SUPPORT_EMMC_BOOT /* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/picosam9g45.h +1 -1
@@ -98,7 +98,7 @@#define CONFIG_AT91_WANTS_COMMON_PHY /* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
include/configs/platinum.h +1 -1
@@ -52,7 +52,7 @@#define CONFIG_PHYLIB /* USB config */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_MXC_USB_PORT 1#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/plutux.h +1 -1
@@ -29,7 +29,7 @@#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K)/* 128K sectors */ /* USB host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/porter.h +1 -1
@@ -82,7 +82,7 @@#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58/* da9063 */ /* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/sama5d2_ptc.h +1 -1
@@ -66,7 +66,7 @@#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#endif
include/configs/seaboard.h +1 -1
@@ -37,7 +37,7 @@#define CONFIG_SYS_MMC_ENV_PART 2/* USB Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/sequoia.h +3 -3
@@ -193,15 +193,15 @@/* USB */ #ifdef CONFIG_440EPX -#undef CONFIG_USB_EHCI/* OHCI by default */ +#undef CONFIG_USB_EHCI_HCD/* OHCI by default */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_PPC4XX #define CONFIG_SYS_PPC4XX_USB_ADDR 0xe0000300#define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_EHCI_MMIO_BIG_ENDIAN #define CONFIG_EHCI_DESC_BIG_ENDIAN -#else /* CONFIG_USB_EHCI */ +#else /* CONFIG_USB_EHCI_HCD */ #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_OHCI_BE_CONTROLLER
include/configs/silk.h +1 -1
@@ -82,7 +82,7 @@#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58/* da9063 */ /* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/snapper9g45.h +1 -1
@@ -61,7 +61,7 @@#define CONFIG_TFTP_TSIZE /* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
include/configs/stout.h +1 -1
@@ -84,7 +84,7 @@#define CONFIG_SYS_TMU_CLK_DIV 4/* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
include/configs/sun4i.h +1 -1
@@ -12,7 +12,7 @@* A10 specific configuration */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_SUNXI #endif
include/configs/sun50i.h +1 -1
@@ -11,7 +11,7 @@* A64 specific configuration */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_SUNXI #define CONFIG_USB_MAX_CONTROLLER_COUNT 1#endif
include/configs/sun5i.h +1 -1
@@ -12,7 +12,7 @@* High Level Configuration Options */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_SUNXI #endif
include/configs/sun6i.h +1 -1
@@ -15,7 +15,7 @@* A31 specific configuration */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_SUNXI #endif
include/configs/sun7i.h +1 -1
@@ -13,7 +13,7 @@* A20 specific configuration */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_SUNXI #endif
include/configs/sun8i.h +1 -1
@@ -13,7 +13,7 @@* A23 specific configuration */ -#ifdef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_SUNXI #endif
include/configs/tao3530.h +1 -1
@@ -228,7 +228,7 @@*/ /* USB EHCI */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 162
include/configs/tbs2910.h +1 -1
@@ -93,7 +93,7 @@/* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/tec-ng.h +1 -1
@@ -33,7 +33,7 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/tec.h +1 -1
@@ -29,7 +29,7 @@#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K)/* 128K sectors */ /* USB host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/tegra-common-post.h +2 -2
@@ -123,8 +123,8 @@#endif /* remove USB */ -#ifdef CONFIG_USB_EHCI -#undef CONFIG_USB_EHCI +#ifdef CONFIG_USB_EHCI_HCD +#undef CONFIG_USB_EHCI_HCD#endif #ifdef CONFIG_USB_EHCI_TEGRA #undef CONFIG_USB_EHCI_TEGRA
include/configs/titanium.h +1 -1
@@ -50,7 +50,7 @@#define CONFIG_PHY_MICREL_KSZ9021 /* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_MXC_USB_PORT 1#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/tqma6.h +1 -1
@@ -81,7 +81,7 @@#define CONFIG_SYS_FSL_ESDHC_ADDR 0/* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX
include/configs/trimslice.h +1 -1
@@ -36,7 +36,7 @@#define CONFIG_ENV_OFFSET (SZ_1M - CONFIG_ENV_SIZE)/* USB Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/usbarmory.h +1 -1
@@ -41,7 +41,7 @@#define CONFIG_SYS_FSL_ESDHC_NUM 1/* USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX5 #define CONFIG_MXC_USB_PORT 1#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/vct.h +1 -1
@@ -99,7 +99,7 @@/* * USB/EHCI */ -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ +#define CONFIG_USB_EHCI_HCD /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_VCT /* on VCT platform */ #define CONFIG_EHCI_MMIO_BIG_ENDIAN #define CONFIG_EHCI_DESC_BIG_ENDIAN
include/configs/venice2.h +1 -1
@@ -34,7 +34,7 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/ventana.h +1 -1
@@ -27,7 +27,7 @@#define CONFIG_SYS_MMC_ENV_PART 2/* USB Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/vinco.h +1 -1
@@ -66,7 +66,7 @@/* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#endif
include/configs/vining_2000.h +1 -1
@@ -76,7 +76,7 @@#define CONFIG_PHY_ATHEROS #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER
include/configs/wandboard.h +1 -1
@@ -50,7 +50,7 @@#define CONFIG_SYS_FSL_ESDHC_ADDR 0/* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/warp.h +1 -1
@@ -58,7 +58,7 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/whistler.h +1 -1
@@ -36,7 +36,7 @@#define CONFIG_SYS_MMC_ENV_PART 2/* USB Host support */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/x600.h +1 -1
@@ -100,7 +100,7 @@#define CONFIG_FPGA_COUNT 1/* USB EHCI options */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_SPEAR #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/x86-common.h +1 -1
@@ -134,7 +134,7 @@/*----------------------------------------------------------------------- * USB configuration */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_PCI #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/xpedite550x.h +1 -1
@@ -332,7 +332,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);/* * USB */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/xpress.h +1 -1
@@ -64,7 +64,7 @@#define CONFIG_MMCROOT "/dev/mmcblk0p2"/* USDHC2 */ /* USB Configs */ -#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/zmx25.h +1 -1
@@ -82,7 +82,7 @@* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ +#define CONFIG_USB_EHCI_HCD /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_MXC #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORT 1
include/usb.h +2 -1
@@ -187,7 +187,8 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int submit_int_msg (struct usb_device *dev,unsigned long pipe,void *buffer,int transfer_len,int interval); -#if definedCONFIG_USB_EHCI || definedCONFIG_USB_MUSB_HOST || defined(CONFIG_DM_USB ) +#if definedCONFIG_USB_EHCI_HCD || definedCONFIG_USB_MUSB_HOST \ + || defined(CONFIG_DM_USB )struct int_queue *create_int_queue (struct usb_device *dev,unsigned long pipe,int queuesize,int elementsize,void *buffer,int interval);int destroy_int_queue (struct usb_device *dev,struct int_queue *queue);
Signature · 1 line
1.9.1
PATCH 14/17 Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD
Quoted 6 lines · Tom Rini
In order to be able to migrate the various SoC EHCI CONFIG options we first need to finish the switch from
CONFIG_USB_EHCItoCONFIG_USB_EHCI_HCD.Cc Marek Vasut <[email protected]>Signed-off-by Tom Rini <[email protected]>
Reviewed-by Marek Vasut <[email protected]>
Signature · 2 lines
Best regards, Marek Vasut
PATCH 14/17 Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD
In reply to Tom RiniQuoted 7 lines · Tom Rini
In order to be able to migrate the various SoC EHCI CONFIG options we first need to finish the switch from
CONFIG_USB_EHCItoCONFIG_USB_EHCI_HCD.Cc Marek Vasut <[email protected]>Signed-off-by Tom Rini <[email protected]>Reviewed-by Marek Vasut <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/9fa595cd/attachment.sig>
PATCH 15/17 Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig
In reply to Tom RiniMigrate the rest of the users of CONFIG_USB_EHCI_HCD over to Kconfig. For a few SoCs, imply or default y this if USB is enabled. In some cases we had not already migrated to CONFIG_USB so do that as well.
Cc Marek Vasut <[email protected]>
Signed-off-by Tom Rini <[email protected]>
--- arch/powerpc/Kconfig | 1 + configs/MPC8315ERDB_defconfig | 1 + configs/MPC8349ITX_LOWBOOT_defconfig | 1 + configs/MPC8349ITX_defconfig | 1 + configs/MPC837XEMDS_HOST_defconfig | 1 + configs/MPC837XERDB_defconfig | 1 + configs/alt_defconfig | 1 + configs/apalis-tk1_defconfig | 1 + configs/apalis_imx6_defconfig | 1 - configs/apalis_imx6_nospl_com_defconfig | 1 - configs/apalis_imx6_nospl_it_defconfig | 1 - configs/apalis_t30_defconfig | 1 + configs/apx4devkit_defconfig | 1 + configs/arndale_defconfig | 1 + configs/beaver_defconfig | 1 + configs/cardhu_defconfig | 1 + configs/cei-tk1-som_defconfig | 1 + configs/cm_fx6_defconfig | 1 - configs/cm_t35_defconfig | 1 + configs/cm_t54_defconfig | 1 + configs/colibri_imx6_defconfig | 1 - configs/colibri_imx6_nospl_defconfig | 1 - configs/colibri_t20_defconfig | 1 + configs/colibri_t30_defconfig | 1 + configs/colibri_vf_defconfig | 1 + configs/corvus_defconfig | 1 + configs/d2net_v2_defconfig | 1 + configs/dalmore_defconfig | 1 + configs/dns325_defconfig | 1 + configs/dockstar_defconfig | 1 + configs/dreamplug_defconfig | 1 + configs/ds109_defconfig | 2 ++ configs/ds414_defconfig | 1 + configs/duovero_defconfig | 1 + configs/e2220-1170_defconfig | 1 + configs/edminiv2_defconfig | 1 + configs/goflexhome_defconfig | 1 + configs/gose_defconfig | 1 + configs/gplugd_defconfig | 1 + configs/gurnard_defconfig | 1 + configs/guruplug_defconfig | 1 + configs/harmony_defconfig | 1 + configs/ib62x0_defconfig | 1 + configs/iconnect_defconfig | 1 + configs/inetspace_v2_defconfig | 1 + configs/jetson-tk1_defconfig | 1 + configs/koelsch_defconfig | 1 + configs/lager_defconfig | 1 + configs/liteboard_defconfig | 1 + configs/lschlv2_defconfig | 1 + configs/lsxhl_defconfig | 1 + configs/lwmon5_defconfig | 1 + configs/m28evk_defconfig | 1 + configs/ma5d4evk_defconfig | 1 + configs/mccmon6_nor_defconfig | 1 + configs/mccmon6_sd_defconfig | 1 + configs/medcom-wide_defconfig | 1 + configs/mpc5121ads_defconfig | 1 + configs/mpc5121ads_rev2_defconfig | 1 + configs/mx23_olinuxino_defconfig | 1 + configs/mx23evk_defconfig | 1 + configs/mx28evk_auart_console_defconfig | 1 + configs/mx28evk_defconfig | 1 + configs/mx28evk_nand_defconfig | 1 + configs/mx28evk_spi_defconfig | 1 + configs/mx35pdk_defconfig | 1 + configs/mx6sllevk_defconfig | 1 - configs/mx6sllevk_plugin_defconfig | 1 - configs/nas220_defconfig | 1 + configs/net2big_v2_defconfig | 1 + configs/netspace_lite_v2_defconfig | 1 + configs/netspace_max_v2_defconfig | 1 + configs/netspace_v2_defconfig | 1 + configs/nsa310s_defconfig | 1 + configs/nyan-big_defconfig | 1 + configs/odroid-xu3_defconfig | 1 + configs/odroid_defconfig | 1 + configs/omap3_beagle_defconfig | 1 + configs/omap3_ha_defconfig | 1 + configs/omap3_overo_defconfig | 1 + configs/omap4_panda_defconfig | 1 + configs/omap5_uevm_defconfig | 1 + configs/openrd_base_defconfig | 1 + configs/openrd_client_defconfig | 1 + configs/openrd_ultimate_defconfig | 1 + configs/opos6uldev_defconfig | 1 - configs/p2371-0000_defconfig | 1 + configs/p2371-2180_defconfig | 1 + configs/p2571_defconfig | 1 + configs/paz00_defconfig | 1 + configs/picosam9g45_defconfig | 1 + configs/plutux_defconfig | 1 + configs/pogo_e02_defconfig | 1 + configs/porter_defconfig | 1 + configs/sama5d2_ptc_nandflash_defconfig | 1 + configs/sama5d2_ptc_spiflash_defconfig | 1 + configs/sansa_fuze_plus_defconfig | 1 + configs/sc_sps_1_defconfig | 1 + configs/seaboard_defconfig | 1 + configs/sheevaplug_defconfig | 1 + configs/silk_defconfig | 1 + configs/smdk5250_defconfig | 1 + configs/snow_defconfig | 1 + configs/socrates_defconfig | 1 + configs/spring_defconfig | 1 + configs/stout_defconfig | 1 + configs/tao3530_defconfig | 1 + configs/tec-ng_defconfig | 1 + configs/tec_defconfig | 1 + configs/trimslice_defconfig | 1 + configs/vct_platinum_defconfig | 1 + configs/vct_platinum_onenand_defconfig | 1 + configs/vct_premium_defconfig | 1 + configs/vct_premium_onenand_defconfig | 1 + configs/venice2_defconfig | 1 + configs/ventana_defconfig | 1 + configs/vinco_defconfig | 1 + configs/whistler_defconfig | 1 + configs/x600_defconfig | 1 + configs/xfi3_defconfig | 1 + configs/zmx25_defconfig | 1 + drivers/usb/host/Kconfig | 1 + include/configs/B4860QDS.h | 2 -- include/configs/BSC9131RDB.h | 2 -- include/configs/BSC9132QDS.h | 1 - include/configs/M52277EVB.h | 1 - include/configs/MPC8315ERDB.h | 1 - include/configs/MPC8349ITX.h | 1 - include/configs/MPC837XEMDS.h | 1 - include/configs/MPC837XERDB.h | 1 - include/configs/MPC8536DS.h | 2 -- include/configs/MPC8544DS.h | 1 - include/configs/MPC8572DS.h | 1 - include/configs/P1010RDB.h | 2 -- include/configs/P1022DS.h | 2 -- include/configs/P1023RDB.h | 2 -- include/configs/P2041RDB.h | 1 - include/configs/T102xQDS.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T1040QDS.h | 2 -- include/configs/T104xRDB.h | 2 -- include/configs/T208xQDS.h | 1 - include/configs/T208xRDB.h | 1 - include/configs/T4240QDS.h | 1 - include/configs/T4240RDB.h | 1 - include/configs/UCP1020.h | 2 -- include/configs/advantech_dms-ba16.h | 1 - include/configs/alt.h | 1 - include/configs/apalis-tk1.h | 1 - include/configs/apalis_t30.h | 1 - include/configs/aristainetos-common.h | 1 - include/configs/beaver.h | 1 - include/configs/cardhu.h | 1 - include/configs/cei-tk1-som.h | 1 - include/configs/cgtqmx6eval.h | 1 - include/configs/cm_t35.h | 1 - include/configs/cm_t3517.h | 1 - include/configs/cm_t54.h | 1 - include/configs/colibri_t20.h | 1 - include/configs/colibri_t30.h | 1 - include/configs/colibri_vf.h | 1 - include/configs/controlcenterd.h | 1 - include/configs/corenet_ds.h | 1 - include/configs/corvus.h | 1 - include/configs/cyrus.h | 1 - include/configs/dalmore.h | 1 - include/configs/ds414.h | 1 - include/configs/duovero.h | 1 - include/configs/e2220-1170.h | 1 - include/configs/eco5pk.h | 1 - include/configs/edminiv2.h | 1 - include/configs/embestmx6boards.h | 1 - include/configs/exynos5250-common.h | 1 - include/configs/ge_bx50v3.h | 1 - include/configs/gose.h | 1 - include/configs/gplugd.h | 1 - include/configs/gw_ventana.h | 1 - include/configs/harmony.h | 1 - include/configs/jetson-tk1.h | 1 - include/configs/koelsch.h | 1 - include/configs/lager.h | 1 - include/configs/liteboard.h | 1 - include/configs/ls1012aqds.h | 1 - include/configs/ls1021aqds.h | 1 - include/configs/ls1021atwr.h | 1 - include/configs/lwmon5.h | 1 - include/configs/m53evk.h | 1 - include/configs/ma5d4evk.h | 1 - include/configs/mccmon6.h | 1 - include/configs/medcom-wide.h | 1 - include/configs/mpc5121ads.h | 1 - include/configs/mv-common.h | 1 - include/configs/mx35pdk.h | 1 - include/configs/mx51evk.h | 1 - include/configs/mx53cx9020.h | 1 - include/configs/mx53loco.h | 1 - include/configs/mx6cuboxi.h | 1 - include/configs/mx6qarm2.h | 1 - include/configs/mx6qsabreauto.h | 1 - include/configs/mx6sabresd.h | 1 - include/configs/mx6slevk.h | 1 - include/configs/mx6sxsabreauto.h | 1 - include/configs/mx6sxsabresd.h | 1 - include/configs/mx6ul_14x14_evk.h | 1 - include/configs/mxs.h | 1 - include/configs/nas220.h | 1 - include/configs/nitrogen6x.h | 1 - include/configs/novena.h | 1 - include/configs/nyan-big.h | 1 - include/configs/odroid.h | 1 - include/configs/odroid_xu3.h | 1 - include/configs/omap3_beagle.h | 1 - include/configs/omap3_overo.h | 1 - include/configs/omap4_panda.h | 1 - include/configs/omap5_uevm.h | 1 - include/configs/ot1200.h | 1 - include/configs/p1_p2_rdb_pc.h | 2 -- include/configs/p1_twr.h | 2 -- include/configs/p2371-0000.h | 1 - include/configs/p2371-2180.h | 1 - include/configs/p2571.h | 1 - include/configs/paz00.h | 1 - include/configs/pico-imx6ul.h | 1 - include/configs/picosam9g45.h | 1 - include/configs/platinum.h | 1 - include/configs/plutux.h | 1 - include/configs/porter.h | 1 - include/configs/sama5d2_ptc.h | 1 - include/configs/seaboard.h | 1 - include/configs/sequoia.h | 3 --- include/configs/silk.h | 1 - include/configs/snapper9g45.h | 1 - include/configs/stout.h | 1 - include/configs/tao3530.h | 1 - include/configs/tbs2910.h | 1 - include/configs/tec-ng.h | 1 - include/configs/tec.h | 1 - include/configs/tegra-common-post.h | 3 --- include/configs/titanium.h | 1 - include/configs/tqma6.h | 1 - include/configs/trimslice.h | 1 - include/configs/usbarmory.h | 1 - include/configs/vct.h | 1 - include/configs/venice2.h | 1 - include/configs/ventana.h | 1 - include/configs/vinco.h | 1 - include/configs/vining_2000.h | 1 - include/configs/wandboard.h | 1 - include/configs/warp.h | 1 - include/configs/whistler.h | 1 - include/configs/x600.h | 1 - include/configs/x86-common.h | 1 - include/configs/xpedite550x.h | 1 - include/configs/xpress.h | 1 - include/configs/zmx25.h | 1 - 255 files changed, 114 insertions(+), 157 deletions(-)
arch/powerpc/Kconfig +1 -0
@@ -32,6 +32,7 @@ config MPC85xx select CREATE_ARCH_SYMLINK select SYS_FSL_DDR select SYS_FSL_DDR_BE + imply USB_EHCI_HCD if USB config MPC86xx bool "MPC86xx"
configs/MPC8315ERDB_defconfig +1 -0
@@ -16,5 +16,6 @@ CONFIG_CMD_EXT2=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/MPC8349ITX_LOWBOOT_defconfig +1 -0
@@ -20,5 +20,6 @@ CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/MPC8349ITX_defconfig +1 -0
@@ -20,5 +20,6 @@ CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/MPC837XEMDS_HOST_defconfig +1 -0
@@ -17,5 +17,6 @@ CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/MPC837XERDB_defconfig +1 -0
@@ -17,5 +17,6 @@ CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/alt_defconfig +1 -0
@@ -25,4 +25,5 @@ CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/apalis-tk1_defconfig +1 -0
@@ -38,6 +38,7 @@ CONFIG_PMIC_AS3722=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/apalis_imx6_defconfig +0 -1
@@ -40,7 +40,6 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/apalis_imx6_nospl_com_defconfig +0 -1
@@ -33,7 +33,6 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/apalis_imx6_nospl_it_defconfig +0 -1
@@ -33,7 +33,6 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/apalis_t30_defconfig +1 -0
@@ -37,6 +37,7 @@ CONFIG_PCI_TEGRA=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/apx4devkit_defconfig +1 -0
@@ -27,5 +27,6 @@ CONFIG_CMD_FAT=y CONFIG_CMD_UBI=y CONFIG_MMC_MXS=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/arndale_defconfig +1 -0
@@ -34,4 +34,5 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/beaver_defconfig +1 -0
@@ -42,6 +42,7 @@ CONFIG_SYS_NS16550=y CONFIG_TEGRA20_SLINK=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/cardhu_defconfig +1 -0
@@ -37,4 +37,5 @@ CONFIG_SYS_NS16550=y CONFIG_TEGRA20_SLINK=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/cei-tk1-som_defconfig +1 -0
@@ -43,6 +43,7 @@ CONFIG_SYS_NS16550=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/cm_fx6_defconfig +0 -1
@@ -52,7 +52,6 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_SST=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
configs/cm_t35_defconfig +1 -0
@@ -35,6 +35,7 @@ CONFIG_LED_STATUS_BOOT=0 CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_LCD=y CONFIG_OF_LIBFDT=y
configs/cm_t54_defconfig +1 -0
@@ -38,5 +38,6 @@ CONFIG_EFI_PARTITION=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/colibri_imx6_defconfig +0 -1
@@ -40,7 +40,6 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/colibri_imx6_nospl_defconfig +0 -1
@@ -33,7 +33,6 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/colibri_t20_defconfig +1 -0
@@ -41,6 +41,7 @@ CONFIG_PWM_TEGRA=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_STORAGE=y
configs/colibri_t30_defconfig +1 -0
@@ -32,6 +32,7 @@ CONFIG_DFU_RAM=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/colibri_vf_defconfig +1 -0
@@ -46,6 +46,7 @@ CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/corvus_defconfig +1 -0
@@ -34,6 +34,7 @@ CONFIG_OF_EMBED=y CONFIG_DFU_NAND=y # CONFIG_MMC is not set CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y
configs/d2net_v2_defconfig +1 -0
@@ -27,5 +27,6 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/dalmore_defconfig +1 -0
@@ -37,6 +37,7 @@ CONFIG_SYS_NS16550=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/dns325_defconfig +1 -0
@@ -21,5 +21,6 @@ CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/dockstar_defconfig +1 -0
@@ -19,5 +19,6 @@ CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/dreamplug_defconfig +1 -0
@@ -23,5 +23,6 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/ds109_defconfig +2 -0
@@ -18,3 +18,5 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y
configs/ds414_defconfig +1 -0
@@ -40,4 +40,5 @@ CONFIG_DEBUG_UART_CLOCK=250000000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/duovero_defconfig +1 -0
@@ -26,5 +26,6 @@ CONFIG_SPL_PARTITION_UUIDS=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/e2220-1170_defconfig +1 -0
@@ -32,6 +32,7 @@ CONFIG_SYS_NS16550=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/edminiv2_defconfig +1 -0
@@ -21,4 +21,5 @@ CONFIG_ISO_PARTITION=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/goflexhome_defconfig +1 -0
@@ -22,5 +22,6 @@ CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/gose_defconfig +1 -0
@@ -25,4 +25,5 @@ CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/gplugd_defconfig +1 -0
@@ -19,5 +19,6 @@ CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/gurnard_defconfig +1 -0
@@ -20,6 +20,7 @@ CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y CONFIG_CMD_DHRYSTONE=y
configs/guruplug_defconfig +1 -0
@@ -23,5 +23,6 @@ CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/harmony_defconfig +1 -0
@@ -34,6 +34,7 @@ CONFIG_PWM_TEGRA=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_STORAGE=y
configs/ib62x0_defconfig +1 -0
@@ -22,5 +22,6 @@ CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/iconnect_defconfig +1 -0
@@ -18,5 +18,6 @@ CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/inetspace_v2_defconfig +1 -0
@@ -27,5 +27,6 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/jetson-tk1_defconfig +1 -0
@@ -43,6 +43,7 @@ CONFIG_SYS_NS16550=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/koelsch_defconfig +1 -0
@@ -25,4 +25,5 @@ CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/lager_defconfig +1 -0
@@ -25,4 +25,5 @@ CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/liteboard_defconfig +1 -0
@@ -27,4 +27,5 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_USB=y CONFIG_OF_LIBFDT=y
configs/lschlv2_defconfig +1 -0
@@ -30,5 +30,6 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/lsxhl_defconfig +1 -0
@@ -21,5 +21,6 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/lwmon5_defconfig +1 -0
@@ -31,6 +31,7 @@ CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_CONSOLE_EXTRA_INFO=y CONFIG_OF_LIBFDT=y
configs/m28evk_defconfig +1 -0
@@ -40,5 +40,6 @@ CONFIG_MMC_MXS=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/ma5d4evk_defconfig +1 -0
@@ -36,6 +36,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_SPI_FLASH=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y
configs/mccmon6_nor_defconfig +1 -0
@@ -32,4 +32,5 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_DM_THERMAL=y +CONFIG_USB=y CONFIG_OF_LIBFDT=y
configs/mccmon6_sd_defconfig +1 -0
@@ -33,4 +33,5 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_DM_THERMAL=y +CONFIG_USB=y CONFIG_OF_LIBFDT=y
configs/medcom-wide_defconfig +1 -0
@@ -32,6 +32,7 @@ CONFIG_PWM_TEGRA=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y CONFIG_VIDEO_TEGRA20=y
configs/mpc5121ads_defconfig +1 -0
@@ -20,5 +20,6 @@ CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/mpc5121ads_rev2_defconfig +1 -0
@@ -22,5 +22,6 @@ CONFIG_ISO_PARTITION=y CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/mx23_olinuxino_defconfig +1 -0
@@ -30,5 +30,6 @@ CONFIG_LED_STATUS_BOOT=0 CONFIG_LED_STATUS_CMD=y CONFIG_MMC_MXS=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/mx23evk_defconfig +1 -0
@@ -28,5 +28,6 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MMC_MXS=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/mx28evk_auart_console_defconfig +1 -0
@@ -37,5 +37,6 @@ CONFIG_MMC_MXS=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/mx28evk_defconfig +1 -0
@@ -38,5 +38,6 @@ CONFIG_MMC_MXS=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/mx28evk_nand_defconfig +1 -0
@@ -37,5 +37,6 @@ CONFIG_MMC_MXS=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/mx28evk_spi_defconfig +1 -0
@@ -37,5 +37,6 @@ CONFIG_MMC_MXS=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/mx35pdk_defconfig +1 -0
@@ -21,5 +21,6 @@ CONFIG_EFI_PARTITION=y # CONFIG_PARTITION_UUIDS is not set CONFIG_MTD_NOR_FLASH=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/mx6sllevk_defconfig +0 -1
@@ -39,5 +39,4 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/mx6sllevk_plugin_defconfig +0 -1
@@ -40,5 +40,4 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/nas220_defconfig +1 -0
@@ -24,5 +24,6 @@ CONFIG_EFI_PARTITION=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/net2big_v2_defconfig +1 -0
@@ -27,5 +27,6 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/netspace_lite_v2_defconfig +1 -0
@@ -27,5 +27,6 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/netspace_max_v2_defconfig +1 -0
@@ -27,5 +27,6 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/netspace_v2_defconfig +1 -0
@@ -27,5 +27,6 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/nsa310s_defconfig +1 -0
@@ -21,5 +21,6 @@ CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/nyan-big_defconfig +1 -0
@@ -52,6 +52,7 @@ CONFIG_TEGRA114_SPI=y CONFIG_TPM_TIS_INFINEON=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/odroid-xu3_defconfig +1 -0
@@ -36,6 +36,7 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y CONFIG_USB_DWC3_PHY_SAMSUNG=y
configs/odroid_defconfig +1 -0
@@ -49,6 +49,7 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_MAX77686=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DWC2_OTG=y
configs/omap3_beagle_defconfig +1 -0
@@ -34,6 +34,7 @@ CONFIG_LED_STATUS_CMD=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y
configs/omap3_ha_defconfig +1 -0
@@ -24,5 +24,6 @@ CONFIG_CMD_FAT=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/omap3_overo_defconfig +1 -0
@@ -42,5 +42,6 @@ CONFIG_EFI_PARTITION=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/omap4_panda_defconfig +1 -0
@@ -25,5 +25,6 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/omap5_uevm_defconfig +1 -0
@@ -37,6 +37,7 @@ CONFIG_DFU_RAM=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y CONFIG_USB_DWC3_OMAP=y
configs/openrd_base_defconfig +1 -0
@@ -20,5 +20,6 @@ CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/openrd_client_defconfig +1 -0
@@ -20,5 +20,6 @@ CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/openrd_ultimate_defconfig +1 -0
@@ -20,5 +20,6 @@ CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/opos6uldev_defconfig +0 -1
@@ -75,7 +75,6 @@ CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/p2371-0000_defconfig +1 -0
@@ -33,6 +33,7 @@ CONFIG_SYS_NS16550=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/p2371-2180_defconfig +1 -0
@@ -38,6 +38,7 @@ CONFIG_SYS_NS16550=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/p2571_defconfig +1 -0
@@ -33,6 +33,7 @@ CONFIG_SYS_NS16550=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/paz00_defconfig +1 -0
@@ -31,6 +31,7 @@ CONFIG_PWM_TEGRA=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y CONFIG_VIDEO_TEGRA20=y
configs/picosam9g45_defconfig +1 -0
@@ -32,6 +32,7 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_LCD=y CONFIG_OF_LIBFDT=y
configs/plutux_defconfig +1 -0
@@ -27,4 +27,5 @@ CONFIG_SPL_DM=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/pogo_e02_defconfig +1 -0
@@ -19,5 +19,6 @@ CONFIG_ISO_PARTITION=y # CONFIG_MMC is not set CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/porter_defconfig +1 -0
@@ -25,4 +25,5 @@ CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/sama5d2_ptc_nandflash_defconfig +1 -0
@@ -19,4 +19,5 @@ CONFIG_CMD_SF=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/sama5d2_ptc_spiflash_defconfig +1 -0
@@ -20,4 +20,5 @@ CONFIG_CMD_SF=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/sansa_fuze_plus_defconfig +1 -0
@@ -27,6 +27,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MMC_MXS=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y CONFIG_OF_LIBFDT=y
configs/sc_sps_1_defconfig +1 -0
@@ -24,5 +24,6 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MMC_MXS=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/seaboard_defconfig +1 -0
@@ -31,6 +31,7 @@ CONFIG_PWM_TEGRA=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_STORAGE=y
configs/sheevaplug_defconfig +1 -0
@@ -23,5 +23,6 @@ CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/silk_defconfig +1 -0
@@ -25,4 +25,5 @@ CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/smdk5250_defconfig +1 -0
@@ -48,6 +48,7 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_VIDEO_BRIDGE=y CONFIG_ERRNO_STR=y
configs/snow_defconfig +1 -0
@@ -66,6 +66,7 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y CONFIG_VIDCONSOLE_AS_LCD=y
configs/socrates_defconfig +1 -0
@@ -24,6 +24,7 @@ CONFIG_CMD_EXT2=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y CONFIG_USB=y +# CONFIG_USB_EHCI_HCD is not set CONFIG_USB_STORAGE=y CONFIG_CONSOLE_EXTRA_INFO=y CONFIG_OF_LIBFDT=y
configs/spring_defconfig +1 -0
@@ -66,6 +66,7 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y CONFIG_VIDCONSOLE_AS_LCD=y
configs/stout_defconfig +1 -0
@@ -25,4 +25,5 @@ CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/tao3530_defconfig +1 -0
@@ -24,5 +24,6 @@ CONFIG_CMD_FAT=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
configs/tec-ng_defconfig +1 -0
@@ -33,4 +33,5 @@ CONFIG_SYS_NS16550=y CONFIG_TEGRA20_SLINK=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/tec_defconfig +1 -0
@@ -32,6 +32,7 @@ CONFIG_PWM_TEGRA=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y CONFIG_VIDEO_TEGRA20=y
configs/trimslice_defconfig +1 -0
@@ -37,4 +37,5 @@ CONFIG_SYS_NS16550=y CONFIG_TEGRA20_SFLASH=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/vct_platinum_defconfig +1 -0
@@ -14,4 +14,5 @@ CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/vct_platinum_onenand_defconfig +1 -0
@@ -17,4 +17,5 @@ CONFIG_CMD_FAT=y CONFIG_CMD_UBI=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/vct_premium_defconfig +1 -0
@@ -14,4 +14,5 @@ CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/vct_premium_onenand_defconfig +1 -0
@@ -17,4 +17,5 @@ CONFIG_CMD_FAT=y CONFIG_CMD_UBI=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/venice2_defconfig +1 -0
@@ -37,6 +37,7 @@ CONFIG_SYS_NS16550=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y
configs/ventana_defconfig +1 -0
@@ -30,6 +30,7 @@ CONFIG_PWM_TEGRA=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_ULPI_VIEWPORT=y CONFIG_USB_ULPI=y CONFIG_USB_STORAGE=y
configs/vinco_defconfig +1 -0
@@ -25,6 +25,7 @@ CONFIG_SPI_FLASH=y CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y
configs/whistler_defconfig +1 -0
@@ -27,4 +27,5 @@ CONFIG_SPL_DM=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/x600_defconfig +1 -0
@@ -36,6 +36,7 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USE_TINY_PRINTF=y CONFIG_OF_LIBFDT=y
configs/xfi3_defconfig +1 -0
@@ -26,6 +26,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MMC_MXS=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y CONFIG_OF_LIBFDT=y
configs/zmx25_defconfig +1 -0
@@ -18,4 +18,5 @@ CONFIG_CMD_FAT=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
drivers/usb/host/Kconfig +1 -0
@@ -57,6 +57,7 @@ endif # USB_XHCI_HCD config USB_EHCI_HCD bool "EHCI HCD (USB 2.0) support" + default y if ARCH_MX5 || ARCH_MX6 select USB_HOST ---help--- The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
include/configs/B4860QDS.h +0 -2
@@ -723,8 +723,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/BSC9131RDB.h +0 -2
@@ -334,8 +334,6 @@ extern unsigned long get_sdram_size(void);#define CONFIG_SHA_HW_ACCEL #endif -#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL
include/configs/BSC9132QDS.h +0 -1
@@ -476,7 +476,6 @@ combinations. this should be removed later#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR#endif -#define CONFIG_USB_EHCI_HCD /* USB */ #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL
include/configs/M52277EVB.h +0 -1
@@ -88,7 +88,6 @@/* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_SYS_USB_EHCI_REGS_BASE 0xFC0B0000#define CONFIG_SYS_USB_EHCI_CPU_INIT #endif
include/configs/MPC8315ERDB.h +0 -1
@@ -366,7 +366,6 @@#define CONFIG_HAS_FSL_DR_USB #define CONFIG_SYS_SCCR_USBDRCM 3 -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_USB_PHY_TYPE "utmi"#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/MPC8349ITX.h +0 -1
@@ -148,7 +148,6 @@/* * Support USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL /* Current USB implementation supports the only USB controller,
include/configs/MPC837XEMDS.h +0 -1
@@ -376,7 +376,6 @@ extern int board_pci_host_broken(void);#define CONFIG_PQ_MDS_PIB 1/* PQ MDS Platform IO Board */ #define CONFIG_HAS_FSL_DR_USB 1/* fixup device tree for the DR USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/MPC837XERDB.h +0 -1
@@ -651,7 +651,6 @@#define CONFIG_ENV_OVERWRITE #define CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/MPC8536DS.h +0 -2
@@ -609,8 +609,6 @@*/ #define CONFIG_HAS_FSL_MPH_USB #ifdef CONFIG_HAS_FSL_MPH_USB -#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL
include/configs/MPC8544DS.h +0 -1
@@ -359,7 +359,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);/* * USB */ -#define CONFIG_USB_EHCI_HCD #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_PCI
include/configs/MPC8572DS.h +0 -1
@@ -559,7 +559,6 @@/* * USB */ -#define CONFIG_USB_EHCI_HCD #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_PCI
include/configs/P1010RDB.h +0 -2
@@ -670,8 +670,6 @@ extern unsigned long get_sdram_size(void);#define CONFIG_HAS_FSL_DR_USB #if defined(CONFIG_HAS_FSL_DR_USB ) -#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL
include/configs/P1022DS.h +0 -2
@@ -606,8 +606,6 @@*/ #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL
include/configs/P1023RDB.h +0 -2
@@ -253,8 +253,6 @@ extern unsigned long get_clock_freq(void);*/ #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL
include/configs/P2041RDB.h +0 -1
@@ -594,7 +594,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB ) || defined(CONFIG_HAS_FSL_MPH_USB ) -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/T102xQDS.h +0 -1
@@ -637,7 +637,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/T102xRDB.h +0 -1
@@ -641,7 +641,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/T1040QDS.h +0 -2
@@ -527,8 +527,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/T104xRDB.h +0 -2
@@ -637,8 +637,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg#define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/T208xQDS.h +0 -1
@@ -12,7 +12,6 @@#define __T208xQDS_H#define CONFIG_ICS307_REFCLK_HZ 25000000/* ICS307 ref clk freq */ -#define CONFIG_USB_EHCI_HCD #if defined(CONFIG_ARCH_T2080 )#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_SRIO /* Enable Serial RapidIO Support */
include/configs/T208xRDB.h +0 -1
@@ -12,7 +12,6 @@#define __T2080RDB_H#define CONFIG_ICS307_REFCLK_HZ 25000000/* ICS307 ref clk freq */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_FSL_SATA_V2 /* High Level Configuration Options */
include/configs/T4240QDS.h +0 -1
@@ -507,7 +507,6 @@ unsigned long get_board_ddr_clk(void);/* * USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB
include/configs/T4240RDB.h +0 -1
@@ -685,7 +685,6 @@ unsigned long get_board_ddr_clk(void);/* * USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB
include/configs/UCP1020.h +0 -2
@@ -453,8 +453,6 @@#define CONFIG_HAS_FSL_DR_USB #if defined(CONFIG_HAS_FSL_DR_USB ) -#define CONFIG_USB_EHCI_HCD -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1#ifdef CONFIG_USB_EHCI_HCD
include/configs/advantech_dms-ba16.h +0 -1
@@ -55,7 +55,6 @@#define CONFIG_BOUNCE_BUFFER /* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/alt.h +0 -1
@@ -81,7 +81,6 @@#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58/* da9063 */ /* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/apalis-tk1.h +0 -1
@@ -36,7 +36,6 @@#define CONFIG_SYS_MMC_ENV_PART 1/* USB host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* PCI host support */
include/configs/apalis_t30.h +0 -1
@@ -33,7 +33,6 @@#define CONFIG_SYS_MMC_ENV_PART 1/* USB host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* PCI host support */
include/configs/aristainetos-common.h +0 -1
@@ -202,7 +202,6 @@#define CONFIG_RTC_M41T11 /* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
include/configs/beaver.h +0 -1
@@ -39,7 +39,6 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/cardhu.h +0 -1
@@ -43,7 +43,6 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/cei-tk1-som.h +0 -1
@@ -38,7 +38,6 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/cgtqmx6eval.h +0 -1
@@ -61,7 +61,6 @@#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08/* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER
include/configs/cm_t35.h +0 -1
@@ -75,7 +75,6 @@/* USB */ #define CONFIG_USB_OMAP3 -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_USB_MUSB_UDC #define CONFIG_TWL4030_USB
include/configs/cm_t3517.h +0 -1
@@ -84,7 +84,6 @@#ifndef CONFIG_USB_MUSB_AM35X #define CONFIG_USB_OMAP3 -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147
include/configs/cm_t54.h +0 -1
@@ -58,7 +58,6 @@#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN)/* USB UHH support options */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/colibri_t20.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_I2C_TEGRA /* USB host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
include/configs/colibri_t30.h +0 -1
@@ -33,7 +33,6 @@#define CONFIG_SYS_MMC_ENV_PART 1/* USB host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/colibri_vf.h +0 -1
@@ -191,7 +191,6 @@#endif /* USB Host Support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_VF #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/controlcenterd.h +0 -1
@@ -291,7 +291,6 @@/* * USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_HAS_FSL_DR_USB #define CONFIG_USB_EHCI_FSL
include/configs/corenet_ds.h +0 -1
@@ -608,7 +608,6 @@#define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB ) || defined(CONFIG_HAS_FSL_MPH_USB ) -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/corvus.h +0 -1
@@ -96,7 +96,6 @@#define CONFIG_AT91_WANTS_COMMON_PHY /* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
include/configs/cyrus.h +0 -1
@@ -426,7 +426,6 @@#define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB ) || defined(CONFIG_HAS_FSL_MPH_USB ) -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_EHCI_IS_TDI
include/configs/dalmore.h +0 -1
@@ -35,7 +35,6 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/ds414.h +0 -1
@@ -74,7 +74,6 @@#endif #if !defined(CONFIG_USB_XHCI_HCD ) -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MARVELL #define CONFIG_EHCI_IS_TDI #endif
include/configs/duovero.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS /* USB UHH support options */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/e2220-1170.h +0 -1
@@ -33,7 +33,6 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB2.0 Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/eco5pk.h +0 -1
@@ -15,7 +15,6 @@#include "tam3517-common.h" -#undef CONFIG_USB_EHCI_HCD#undef CONFIG_USB_EHCI_OMAP#undef CONFIG_USB_OMAP3
include/configs/edminiv2.h +0 -1
@@ -171,7 +171,6 @@* Common USB/EHCI configuration */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_MARVELL #define ORION5X_USB20_HOST_PORT_BASE ORION5X_USB20_PORT0_BASE#define CONFIG_SUPPORT_VFAT
include/configs/embestmx6boards.h +0 -1
@@ -35,7 +35,6 @@#define CONFIG_SYS_I2C_SPEED 100000/* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/exynos5250-common.h +0 -1
@@ -26,7 +26,6 @@#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK/* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_EXYNOS #define CONFIG_USB_XHCI_EXYNOS
include/configs/ge_bx50v3.h +0 -1
@@ -68,7 +68,6 @@/* USB Configs */ #ifdef CONFIG_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/gose.h +0 -1
@@ -78,7 +78,6 @@#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58/* da9063 */ /* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/gplugd.h +0 -1
@@ -82,7 +82,6 @@#define CONFIG_ENV_SIZE 0x4000#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_ARMADA100 #define CONFIG_EHCI_IS_TDI #endif /* CONFIG_CMD_USB */
include/configs/gw_ventana.h +0 -1
@@ -156,7 +156,6 @@#define CONFIG_ARP_TIMEOUT 200UL/* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/harmony.h +0 -1
@@ -36,7 +36,6 @@#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K)/* 128K sector size */ /* USB Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/jetson-tk1.h +0 -1
@@ -34,7 +34,6 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/koelsch.h +0 -1
@@ -78,7 +78,6 @@#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58/* da9063 */ /* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/lager.h +0 -1
@@ -80,7 +80,6 @@#define CONFIG_SYS_TMU_CLK_DIV 4/* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
include/configs/liteboard.h +0 -1
@@ -137,7 +137,6 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/ls1012aqds.h +0 -1
@@ -115,7 +115,6 @@/*#define CONFIG_HAS_FSL_DR_USB*/ #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/ls1021aqds.h +0 -1
@@ -402,7 +402,6 @@ unsigned long get_board_ddr_clk(void);/*#define CONFIG_HAS_FSL_DR_USB*/ #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/ls1021atwr.h +0 -1
@@ -40,7 +40,6 @@/*#define CONFIG_HAS_FSL_DR_USB*/ #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif
include/configs/lwmon5.h +0 -1
@@ -362,7 +362,6 @@/* * USB/EHCI */ -#define CONFIG_USB_EHCI_HCD /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_PPC4XX /* on PPC4xx platform */ #define CONFIG_SYS_PPC4XX_USB_ADDR 0xe0000300#define CONFIG_EHCI_MMIO_BIG_ENDIAN
include/configs/m53evk.h +0 -1
@@ -162,7 +162,6 @@* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/ma5d4evk.h +0 -1
@@ -102,7 +102,6 @@* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/mccmon6.h +0 -1
@@ -98,7 +98,6 @@"128k@0x19C0000(swupdate-kernel-dtb.nor)" /* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/medcom-wide.h +0 -1
@@ -29,7 +29,6 @@#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K)/* 128K sectors */ /* USB host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/mpc5121ads.h +0 -1
@@ -369,7 +369,6 @@*/ #if defined(CONFIG_CMD_USB ) -#define CONFIG_USB_EHCI_HCD /* Enable EHCI Support */ #define CONFIG_USB_EHCI_FSL /* On a FSL platform */ #define CONFIG_EHCI_MMIO_BIG_ENDIAN /* With big-endian regs */ #define CONFIG_EHCI_DESC_BIG_ENDIAN
include/configs/mv-common.h +0 -1
@@ -121,7 +121,6 @@* Common USB/EHCI configuration */ #if defined(CONFIG_CMD_USB ) && !defined(CONFIG_DM ) -#define CONFIG_USB_EHCI_HCD /* Enable EHCI USB support */ #define CONFIG_SUPPORT_VFAT #endif /* CONFIG_CMD_USB */
include/configs/mx35pdk.h +0 -1
@@ -199,7 +199,6 @@#define CONFIG_SYS_NAND_LARGEPAGE /* EHCI driver */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1#define CONFIG_EHCI_IS_TDI #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/mx51evk.h +0 -1
@@ -73,7 +73,6 @@#define CONFIG_FEC_MXC_PHYADDR 0x1F/* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/mx53cx9020.h +0 -1
@@ -45,7 +45,6 @@#define CONFIG_FEC_MXC_PHYADDR 0x1F/* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_STORAGE #define CONFIG_USB_HOST_ETHER
include/configs/mx53loco.h +0 -1
@@ -42,7 +42,6 @@#define CONFIG_FEC_MXC_PHYADDR 0x1F/* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/mx6cuboxi.h +0 -1
@@ -44,7 +44,6 @@#define CONFIG_IMX_VIDEO_SKIP /* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/mx6qarm2.h +0 -1
@@ -128,7 +128,6 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER
include/configs/mx6qsabreauto.h +0 -1
@@ -15,7 +15,6 @@#define CONFIG_MMCROOT "/dev/mmcblk0p2"/* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/mx6sabresd.h +0 -1
@@ -63,7 +63,6 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER
include/configs/mx6slevk.h +0 -1
@@ -159,7 +159,6 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER
include/configs/mx6sxsabreauto.h +0 -1
@@ -149,7 +149,6 @@#define CONFIG_PHY_ATHEROS #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER
include/configs/mx6sxsabresd.h +0 -1
@@ -167,7 +167,6 @@#define CONFIG_PHY_ATHEROS #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER
include/configs/mx6ul_14x14_evk.h +0 -1
@@ -186,7 +186,6 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/mxs.h +0 -1
@@ -168,7 +168,6 @@/* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MXS #define CONFIG_EHCI_IS_TDI #endif
include/configs/nas220.h +0 -1
@@ -94,7 +94,6 @@* USB/EHCI */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ #define CONFIG_EHCI_IS_TDI #define CONFIG_SUPPORT_VFAT
include/configs/nitrogen6x.h +0 -1
@@ -74,7 +74,6 @@#define CONFIG_PHY_MICREL_KSZ9021 /* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/novena.h +0 -1
@@ -135,7 +135,6 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP #define CONFIG_USB_HOST_ETHER
include/configs/nyan-big.h +0 -1
@@ -39,7 +39,6 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/odroid.h +0 -1
@@ -188,7 +188,6 @@#define CONFIG_LIB_HW_RAND /* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_EXYNOS #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/odroid_xu3.h +0 -1
@@ -41,7 +41,6 @@#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"/* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_EXYNOS /* DFU */
include/configs/omap3_beagle.h +0 -1
@@ -55,7 +55,6 @@#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000/* USB EHCI */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147
include/configs/omap3_overo.h +0 -1
@@ -40,7 +40,6 @@#define CONFIG_TWL4030_LED /* USB EHCI */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/omap4_panda.h +0 -1
@@ -17,7 +17,6 @@*/ /* USB UHH support options */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/omap5_uevm.h +0 -1
@@ -52,7 +52,6 @@#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22/* USB UHH support options */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/ot1200.h +0 -1
@@ -55,7 +55,6 @@#define CONFIG_SYS_FSL_USDHC_NUM 2/* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/p1_p2_rdb_pc.h +0 -2
@@ -823,8 +823,6 @@#define CONFIG_HAS_FSL_DR_USB #if defined(CONFIG_HAS_FSL_DR_USB ) -#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL
include/configs/p1_twr.h +0 -2
@@ -394,8 +394,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_HAS_FSL_DR_USB #if defined(CONFIG_HAS_FSL_DR_USB ) -#define CONFIG_USB_EHCI_HCD -#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_FSL
include/configs/p2371-0000.h +0 -1
@@ -33,7 +33,6 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB2.0 Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/p2371-2180.h +0 -1
@@ -33,7 +33,6 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB2.0 Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/p2571.h +0 -1
@@ -34,7 +34,6 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB2.0 Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/paz00.h +0 -1
@@ -29,7 +29,6 @@#define CONFIG_SYS_MMC_ENV_PART 2/* USB Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/pico-imx6ul.h +0 -1
@@ -37,7 +37,6 @@#define CONFIG_SUPPORT_EMMC_BOOT /* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/picosam9g45.h +0 -1
@@ -98,7 +98,6 @@#define CONFIG_AT91_WANTS_COMMON_PHY /* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
include/configs/platinum.h +0 -1
@@ -52,7 +52,6 @@#define CONFIG_PHYLIB /* USB config */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_MXC_USB_PORT 1#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/plutux.h +0 -1
@@ -29,7 +29,6 @@#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K)/* 128K sectors */ /* USB host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/porter.h +0 -1
@@ -82,7 +82,6 @@#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58/* da9063 */ /* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/sama5d2_ptc.h +0 -1
@@ -66,7 +66,6 @@#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#endif
include/configs/seaboard.h +0 -1
@@ -37,7 +37,6 @@#define CONFIG_SYS_MMC_ENV_PART 2/* USB Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/sequoia.h +0 -3
@@ -192,9 +192,6 @@/* USB */ #ifdef CONFIG_440EPX - -#undef CONFIG_USB_EHCI_HCD/* OHCI by default */ -#ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_PPC4XX #define CONFIG_SYS_PPC4XX_USB_ADDR 0xe0000300
include/configs/silk.h +0 -1
@@ -82,7 +82,6 @@#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58/* da9063 */ /* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/snapper9g45.h +0 -1
@@ -61,7 +61,6 @@#define CONFIG_TFTP_TSIZE /* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
include/configs/stout.h +0 -1
@@ -84,7 +84,6 @@#define CONFIG_SYS_TMU_CLK_DIV 4/* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_RMOBILE #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
include/configs/tao3530.h +0 -1
@@ -228,7 +228,6 @@*/ /* USB EHCI */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 162
include/configs/tbs2910.h +0 -1
@@ -93,7 +93,6 @@/* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/tec-ng.h +0 -1
@@ -33,7 +33,6 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/tec.h +0 -1
@@ -29,7 +29,6 @@#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K)/* 128K sectors */ /* USB host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/tegra-common-post.h +0 -3
@@ -123,9 +123,6 @@#endif /* remove USB */ -#ifdef CONFIG_USB_EHCI_HCD -#undef CONFIG_USB_EHCI_HCD -#endif #ifdef CONFIG_USB_EHCI_TEGRA #undef CONFIG_USB_EHCI_TEGRA#endif
include/configs/titanium.h +0 -1
@@ -50,7 +50,6 @@#define CONFIG_PHY_MICREL_KSZ9021 /* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_MXC_USB_PORT 1#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/tqma6.h +0 -1
@@ -81,7 +81,6 @@#define CONFIG_SYS_FSL_ESDHC_ADDR 0/* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX
include/configs/trimslice.h +0 -1
@@ -36,7 +36,6 @@#define CONFIG_ENV_OFFSET (SZ_1M - CONFIG_ENV_SIZE)/* USB Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/usbarmory.h +0 -1
@@ -41,7 +41,6 @@#define CONFIG_SYS_FSL_ESDHC_NUM 1/* USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX5 #define CONFIG_MXC_USB_PORT 1#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/vct.h +0 -1
@@ -99,7 +99,6 @@/* * USB/EHCI */ -#define CONFIG_USB_EHCI_HCD /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_VCT /* on VCT platform */ #define CONFIG_EHCI_MMIO_BIG_ENDIAN #define CONFIG_EHCI_DESC_BIG_ENDIAN
include/configs/venice2.h +0 -1
@@ -34,7 +34,6 @@#define CONFIG_SPI_FLASH_SIZE (4 << 20)/* USB Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/ventana.h +0 -1
@@ -27,7 +27,6 @@#define CONFIG_SYS_MMC_ENV_PART 2/* USB Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/vinco.h +0 -1
@@ -66,7 +66,6 @@/* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#endif
include/configs/vining_2000.h +0 -1
@@ -76,7 +76,6 @@#define CONFIG_PHY_ATHEROS #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER
include/configs/wandboard.h +0 -1
@@ -50,7 +50,6 @@#define CONFIG_SYS_FSL_ESDHC_ADDR 0/* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/warp.h +0 -1
@@ -58,7 +58,6 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/whistler.h +0 -1
@@ -36,7 +36,6 @@#define CONFIG_SYS_MMC_ENV_PART 2/* USB Host support */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_TEGRA /* USB networking support */
include/configs/x600.h +0 -1
@@ -100,7 +100,6 @@#define CONFIG_FPGA_COUNT 1/* USB EHCI options */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_SPEAR #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/x86-common.h +0 -1
@@ -134,7 +134,6 @@/*----------------------------------------------------------------------- * USB configuration */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_PCI #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/xpedite550x.h +0 -1
@@ -332,7 +332,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);/* * USB */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/xpress.h +0 -1
@@ -64,7 +64,6 @@#define CONFIG_MMCROOT "/dev/mmcblk0p2"/* USDHC2 */ /* USB Configs */ -#define CONFIG_USB_EHCI_HCD #define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/zmx25.h +0 -1
@@ -82,7 +82,6 @@* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_HCD /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_MXC #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORT 1
Signature · 1 line
1.9.1
PATCH 15/17 Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig
Quoted 6 lines · Tom Rini
Migrate the rest of the users of
CONFIG_USB_EHCI_HCDover toKconfig. For a few SoCs, imply or default y this if USB is enabled. In some cases we had not already migrated toCONFIG_USBso do that as well.Cc Marek Vasut <[email protected]>Signed-off-by Tom Rini <[email protected]>
Reviewed-by Marek Vasut <[email protected]>
Signature · 2 lines
Best regards, Marek Vasut
PATCH 15/17 Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig
In reply to Tom RiniQuoted 7 lines · Tom Rini
Migrate the rest of the users of
CONFIG_USB_EHCI_HCDover toKconfig. For a few SoCs, imply or default y this if USB is enabled. In some cases we had not already migrated toCONFIG_USBso do that as well.Cc Marek Vasut <[email protected]>Signed-off-by Tom Rini <[email protected]>Reviewed-by Marek Vasut <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/d181ed7f/attachment.sig>
PATCH 16/17 Kconfig: USB: Migrate existing USB_EHCI_xxx options
In reply to Tom RiniThe following options are migrated over fully now:
- USB_EHCI_ATMEL
- USB_EHCI_MARVELL
- USB_EHCI_MX6
- USB_EHCI_MX7
- USB_EHCI_MSM
- USB_EHCI_ZYNQ
- USB_EHCI_GENERIC
This also requires fixing the depends on USB_EHCI_MARVELL as it's used by Orion5X and Kirkwood as well.
Cc Marek Vasut <[email protected]>
Signed-off-by Tom Rini <[email protected]>
--- arch/arm/mach-kirkwood/include/mach/config.h | 1 - drivers/usb/host/Kconfig | 4 ++-- include/configs/advantech_dms-ba16.h | 1 - include/configs/aristainetos-common.h | 1 - include/configs/cgtqmx6eval.h | 1 - include/configs/corvus.h | 1 - include/configs/ds414.h | 1 - include/configs/edminiv2.h | 1 - include/configs/embestmx6boards.h | 1 - include/configs/ge_bx50v3.h | 1 - include/configs/gw_ventana.h | 1 - include/configs/liteboard.h | 1 - include/configs/ma5d4evk.h | 1 - include/configs/mccmon6.h | 1 - include/configs/mx6cuboxi.h | 1 - include/configs/mx6qarm2.h | 1 - include/configs/mx6qsabreauto.h | 1 - include/configs/mx6sabresd.h | 1 - include/configs/mx6slevk.h | 1 - include/configs/mx6sxsabreauto.h | 1 - include/configs/mx6sxsabresd.h | 1 - include/configs/mx6ul_14x14_evk.h | 1 - include/configs/nitrogen6x.h | 1 - include/configs/novena.h | 1 - include/configs/ot1200.h | 1 - include/configs/pico-imx6ul.h | 1 - include/configs/picosam9g45.h | 1 - include/configs/platinum.h | 1 - include/configs/sama5d2_ptc.h | 1 - include/configs/snapper9g45.h | 1 - include/configs/tbs2910.h | 1 - include/configs/titanium.h | 1 - include/configs/tqma6.h | 1 - include/configs/vinco.h | 1 - include/configs/vining_2000.h | 1 - include/configs/wandboard.h | 1 - include/configs/warp.h | 1 - include/configs/xpress.h | 1 - 38 files changed, 2 insertions(+), 39 deletions(-)
arch/arm/mach-kirkwood/include/mach/config.h +0 -1
@@ -89,7 +89,6 @@* USB/EHCI */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_MARVELL #define CONFIG_EHCI_IS_TDI #endif /* CONFIG_CMD_USB */
drivers/usb/host/Kconfig +2 -2
@@ -85,8 +85,8 @@ config USB_EHCI_ATMEL Enables support for the on-chip EHCI controller on Atmel chips. config USB_EHCI_MARVELL - bool "Support for MVEBU (AXP / A38x) on-chip EHCI USB controller" - depends on ARCH_MVEBU + bool "Support for Marvell on-chip EHCI USB controller" + depends on ARCH_MVEBU || KIRKWOOD || ORION5X default y ---help--- Enables support for the on-chip EHCI controller on MVEBU SoCs.
include/configs/advantech_dms-ba16.h +0 -1
@@ -55,7 +55,6 @@#define CONFIG_BOUNCE_BUFFER /* USB Configs */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/aristainetos-common.h +0 -1
@@ -202,7 +202,6 @@#define CONFIG_RTC_M41T11 /* USB Configs */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/cgtqmx6eval.h +0 -1
@@ -61,7 +61,6 @@#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08/* USB Configs */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/corvus.h +0 -1
@@ -96,7 +96,6 @@#define CONFIG_AT91_WANTS_COMMON_PHY /* USB */ -#define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2/* USB DFU support */
include/configs/ds414.h +0 -1
@@ -74,7 +74,6 @@#endif #if !defined(CONFIG_USB_XHCI_HCD ) -#define CONFIG_USB_EHCI_MARVELL #define CONFIG_EHCI_IS_TDI #endif
include/configs/edminiv2.h +0 -1
@@ -171,7 +171,6 @@* Common USB/EHCI configuration */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_MARVELL #define ORION5X_USB20_HOST_PORT_BASE ORION5X_USB20_PORT0_BASE#define CONFIG_SUPPORT_VFAT #endif /* CONFIG_CMD_USB */
include/configs/embestmx6boards.h +0 -1
@@ -35,7 +35,6 @@#define CONFIG_SYS_I2C_SPEED 100000/* USB Configs */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/ge_bx50v3.h +0 -1
@@ -68,7 +68,6 @@/* USB Configs */ #ifdef CONFIG_USB -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/gw_ventana.h +0 -1
@@ -156,7 +156,6 @@#define CONFIG_ARP_TIMEOUT 200UL/* USB Configs */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_ETHER_SMSC95XX
include/configs/liteboard.h +0 -1
@@ -137,7 +137,6 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/ma5d4evk.h +0 -1
@@ -102,7 +102,6 @@* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3/* USB device */
include/configs/mccmon6.h +0 -1
@@ -98,7 +98,6 @@"128k at 0x19C0000(swupdate-kernel-dtb.nor)" /* USB Configs */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/mx6cuboxi.h +0 -1
@@ -44,7 +44,6 @@#define CONFIG_IMX_VIDEO_SKIP /* USB */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)#define CONFIG_MXC_USB_FLAGS 0
include/configs/mx6qarm2.h +0 -1
@@ -128,7 +128,6 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/mx6qsabreauto.h +0 -1
@@ -15,7 +15,6 @@#define CONFIG_MMCROOT "/dev/mmcblk0p2"/* USB Configs */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/mx6sabresd.h +0 -1
@@ -63,7 +63,6 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/mx6slevk.h +0 -1
@@ -159,7 +159,6 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/mx6sxsabreauto.h +0 -1
@@ -149,7 +149,6 @@#define CONFIG_PHY_ATHEROS #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/mx6sxsabresd.h +0 -1
@@ -167,7 +167,6 @@#define CONFIG_PHY_ATHEROS #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/mx6ul_14x14_evk.h +0 -1
@@ -186,7 +186,6 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)#define CONFIG_MXC_USB_FLAGS 0
include/configs/nitrogen6x.h +0 -1
@@ -74,7 +74,6 @@#define CONFIG_PHY_MICREL_KSZ9021 /* USB Configs */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_ETHER_MCS7830
include/configs/novena.h +0 -1
@@ -135,7 +135,6 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_MX6 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/ot1200.h +0 -1
@@ -55,7 +55,6 @@#define CONFIG_SYS_FSL_USDHC_NUM 2/* USB Configs */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
include/configs/pico-imx6ul.h +0 -1
@@ -37,7 +37,6 @@#define CONFIG_SUPPORT_EMMC_BOOT /* USB Configs */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)#define CONFIG_MXC_USB_FLAGS 0
include/configs/picosam9g45.h +0 -1
@@ -98,7 +98,6 @@#define CONFIG_AT91_WANTS_COMMON_PHY /* USB */ -#define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2#define CONFIG_SYS_LOAD_ADDR 0x22000000/* load address */
include/configs/platinum.h +0 -1
@@ -52,7 +52,6 @@#define CONFIG_PHYLIB /* USB config */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_MXC_USB_PORT 1#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)#define CONFIG_MXC_USB_FLAGS 0
include/configs/sama5d2_ptc.h +0 -1
@@ -66,7 +66,6 @@#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#endif
include/configs/snapper9g45.h +0 -1
@@ -61,7 +61,6 @@#define CONFIG_TFTP_TSIZE /* USB */ -#define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2/* MMC */
include/configs/tbs2910.h +0 -1
@@ -93,7 +93,6 @@/* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/titanium.h +0 -1
@@ -50,7 +50,6 @@#define CONFIG_PHY_MICREL_KSZ9021 /* USB Configs */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_MXC_USB_PORT 1#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)#define CONFIG_MXC_USB_FLAGS 0
include/configs/tqma6.h +0 -1
@@ -81,7 +81,6 @@#define CONFIG_SYS_FSL_ESDHC_ADDR 0/* USB Configs */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
include/configs/vinco.h +0 -1
@@ -66,7 +66,6 @@/* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_ATMEL #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#endif
include/configs/vining_2000.h +0 -1
@@ -76,7 +76,6 @@#define CONFIG_PHY_ATHEROS #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX
include/configs/wandboard.h +0 -1
@@ -50,7 +50,6 @@#define CONFIG_SYS_FSL_ESDHC_ADDR 0/* USB Configs */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)#define CONFIG_MXC_USB_FLAGS 0
include/configs/warp.h +0 -1
@@ -58,7 +58,6 @@/* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)#define CONFIG_MXC_USB_FLAGS 0
include/configs/xpress.h +0 -1
@@ -64,7 +64,6 @@#define CONFIG_MMCROOT "/dev/mmcblk0p2"/* USDHC2 */ /* USB Configs */ -#define CONFIG_USB_EHCI_MX6 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)#define CONFIG_MXC_USB_FLAGS 0
Signature · 1 line
1.9.1
PATCH 16/17 Kconfig: USB: Migrate existing USB_EHCI_xxx options
Quoted 9 lines · Tom Rini
The following options are migrated over fully now:
-USB_EHCI_ATMEL
-USB_EHCI_MARVELL
-USB_EHCI_MX6
-USB_EHCI_MX7
-USB_EHCI_MSM
-USB_EHCI_ZYNQ
-USB_EHCI_GENERIC
Quoted 5 lines
This also requires fixing the depends on
USB_EHCI_MARVELLas it's used by Orion5X and Kirkwood as well.Cc Marek Vasut <[email protected]>Signed-off-by Tom Rini <[email protected]>
Reviewed-by Marek Vasut <[email protected]>
Signature · 2 lines
Best regards, Marek Vasut
PATCH 16/17 Kconfig: USB: Migrate existing USB_EHCI_xxx options
In reply to Tom RiniQuoted 9 lines · Tom Rini
The following options are migrated over fully now:
-USB_EHCI_ATMEL
-USB_EHCI_MARVELL
-USB_EHCI_MX6
-USB_EHCI_MX7
-USB_EHCI_MSM
-USB_EHCI_ZYNQ
-USB_EHCI_GENERIC
Quoted 6 lines
This also requires fixing the depends on
USB_EHCI_MARVELLas it's used by Orion5X and Kirkwood as well.Cc Marek Vasut <[email protected]>Signed-off-by Tom Rini <[email protected]>Reviewed-by Marek Vasut <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/d69afe6a/attachment.sig>
PATCH 17/17 Kconfig: OMAP: USB: Migrate CONFIG_USB_EHCI_OMAP to Kconfig
In reply to Tom RiniFollow the exiting logic for the i.MX options when migrating this option.
Cc Marek Vasut <[email protected]>
Signed-off-by Tom Rini <[email protected]>
--- configs/eco5pk_defconfig | 1 + drivers/usb/host/Kconfig | 8 ++++++++ include/configs/cm_t35.h | 1 - include/configs/cm_t3517.h | 1 - include/configs/cm_t54.h | 1 - include/configs/duovero.h | 1 - include/configs/eco5pk.h | 1 - include/configs/mcx.h | 1 - include/configs/omap3_beagle.h | 1 - include/configs/omap3_overo.h | 1 - include/configs/omap4_panda.h | 1 - include/configs/omap5_uevm.h | 1 - include/configs/tam3517-common.h | 1 - include/configs/tao3530.h | 1 - scripts/config_whitelist.txt | 1 - 15 files changed, 9 insertions(+), 13 deletions(-)
configs/eco5pk_defconfig +1 -0
@@ -25,5 +25,6 @@ CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_OMAP is not set CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y
drivers/usb/host/Kconfig +8 -0
@@ -105,6 +105,14 @@ config USB_EHCI_MX7 ---help--- Enables support for the on-chip EHCI controller on i.MX7 SoCs. +config USB_EHCI_OMAP + bool "Support for OMAP3+ on-chip EHCI USB controller" + depends on ARCH_OMAP2PLUS + default y + ---help--- + Enables support for the on-chip EHCI controller on OMAP3 and later + SoCs. + if USB_EHCI_MX7 config MXC_USB_OTG_HACTIVE
include/configs/cm_t35.h +0 -1
@@ -75,7 +75,6 @@/* USB */ #define CONFIG_USB_OMAP3 -#define CONFIG_USB_EHCI_OMAP #define CONFIG_USB_MUSB_UDC #define CONFIG_TWL4030_USB
include/configs/cm_t3517.h +0 -1
@@ -84,7 +84,6 @@#ifndef CONFIG_USB_MUSB_AM35X #define CONFIG_USB_OMAP3 -#define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147#else /* !CONFIG_USB_MUSB_AM35X */
include/configs/cm_t54.h +0 -1
@@ -58,7 +58,6 @@#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN)/* USB UHH support options */ -#define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/duovero.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS /* USB UHH support options */ -#define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
include/configs/eco5pk.h +0 -1
@@ -15,7 +15,6 @@#include "tam3517-common.h" -#undef CONFIG_USB_EHCI_OMAP#undef CONFIG_USB_OMAP3/* Our console port is port3 */
include/configs/mcx.h +0 -1
@@ -73,7 +73,6 @@ 115200}/* EHCI */ -#define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 57#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#define CONFIG_USB_HOST_ETHER
include/configs/omap3_beagle.h +0 -1
@@ -56,7 +56,6 @@/* USB EHCI */ -#define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/omap3_overo.h +0 -1
@@ -40,7 +40,6 @@#define CONFIG_TWL4030_LED /* USB EHCI */ -#define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/omap4_panda.h +0 -1
@@ -17,7 +17,6 @@*/ /* USB UHH support options */ -#define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
include/configs/omap5_uevm.h +0 -1
@@ -52,7 +52,6 @@#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22/* USB UHH support options */ -#define CONFIG_USB_EHCI_OMAP #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
include/configs/tam3517-common.h +0 -1
@@ -66,7 +66,6 @@#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200}/* EHCI */ -#define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 25#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
include/configs/tao3530.h +0 -1
@@ -228,7 +228,6 @@*/ /* USB EHCI */ -#define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 162#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
scripts/config_whitelist.txt +0 -1
@@ -6285,7 +6285,6 @@ CONFIG_USB_EHCI_KIRKWOOD CONFIG_USB_EHCI_MX5 CONFIG_USB_EHCI_MXC CONFIG_USB_EHCI_MXS -CONFIG_USB_EHCI_OMAP CONFIG_USB_EHCI_PCI CONFIG_USB_EHCI_PPC4XX CONFIG_USB_EHCI_RMOBILE
Signature · 1 line
1.9.1
PATCH 17/17 Kconfig: OMAP: USB: Migrate CONFIG_USB_EHCI_OMAP to Kconfig
Quoted 5 lines · Tom Rini
Follow the exiting logic for the i.MX options when migrating this option.
Cc Marek Vasut <[email protected]>Signed-off-by Tom Rini <[email protected]>
Reviewed-by Marek Vasut <[email protected]>
Any reason why you only converted the OMAP and iMX6 stuff and not the rest, like MXC, MXS etc. ?
Signature · 2 lines
Best regards, Marek Vasut
PATCH 17/17 Kconfig: OMAP: USB: Migrate CONFIG_USB_EHCI_OMAP to Kconfig
Quoted 11 lines · Marek Vasut
Quoted 5 lines · Tom Rini
Follow the exiting logic for the i.MX options when migrating this option.
Cc Marek Vasut <[email protected]>Signed-off-by Tom Rini <[email protected]>Reviewed-by Marek Vasut <[email protected]>Any reason why you only converted the OMAP and iMX6 stuff and not the rest, like MXC, MXS etc. ?
Series size, and the i.MX6 conversions were just cleaning up headers that already had the option converted. Most of the others (marvell being the notable to me exception since I had to iterate over fixing Kirkwood then Orion5x) had been done. I do plan more conversions.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170513/357ec4a0/attachment.sig>
PATCH 17/17 Kconfig: OMAP: USB: Migrate CONFIG_USB_EHCI_OMAP to Kconfig
In reply to Tom RiniQuoted 6 lines · Tom Rini
Follow the exiting logic for the i.MX options when migrating this option.
Cc Marek Vasut <[email protected]>Signed-off-by Tom Rini <[email protected]>Reviewed-by Marek Vasut <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/083f668f/attachment.sig>