omap3: omap3_logic: switch to using TI_COMMON_CMD_OPTION

PATCH In review Adam Ford 2 participants 3 messages May 13, 2017 – May 15, 2017

lore

Share & tools

lore

Adam Ford

author

2017-05-13 13:14 UTC #0 lore raw

PATCH 1/1 omap3: omap3_logic: switch to using TI_COMMON_CMD_OPTION

Enable TI_COMMON_CMD_OPTIONS and remove similar options from the defconfig. Updated with savedefconfig

CMD_USB isn't enabled yet. I have some testing to do with musb.

Signed-off-by Adam Ford <[email protected]>

board/logicpd/omap3som/Kconfig +2 -0

index 03d272a..68d40dc 100644
@@ -9,4 +9,6 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "omap3_logic"
 
+source "board/ti/common/Kconfig"
+
 endif

configs/omap3_logic_defconfig +2 ~~-17~~

index 561bdfb..50450c9 100644
@@ -1,11 +1,11 @@
 CONFIG_ARM=y
 CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_TI_COMMON_CMD_OPTIONS=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_OMAP34XX=y
 CONFIG_TARGET_OMAP3_LOGIC=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-37xx-devkit"
-CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y

@@ -16,29 +16,14 @@ CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="OMAP Logic # "
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set
-CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
+# CONFIG_CMD_USB is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_CMD_UBI=y
 CONFIG_ISO_PARTITION=y
-CONFIG_EFI_PARTITION=y
 CONFIG_OF_CONTROL=y
 # CONFIG_BLK is not set
 CONFIG_DM_I2C=y

Signature · 1 line

2.7.4

Tom Rini

2017-05-14 18:52 UTC #1 lore raw

PATCH 1/1 omap3: omap3_logic: switch to using TI_COMMON_CMD_OPTION

board/logicpd/omap3som/Kconfig

Quoted 10 lines · Adam Ford

Enable TI_COMMON_CMD_OPTIONS and remove similar options from the defconfig. Updated with savedefconfig
CMD_USB isn't enabled yet. I have some testing to do with musb.
Signed-off-by Adam Ford <[email protected]>
board/logicpd/omap3som/Kconfig +0 -0
index 03d272a..68d40dc 100644

Reviewed-by Tom Rini <[email protected]>

Signature · 8 lines

Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170514/9e1b86de/attachment.sig>

Tom Rini

2017-05-15 23:20 UTC #2 lore raw

In reply to Adam Ford

board/logicpd/omap3som/Kconfig

Quoted 11 lines · Adam Ford

Enable TI_COMMON_CMD_OPTIONS and remove similar options from the defconfig. Updated with savedefconfig
CMD_USB isn't enabled yet. I have some testing to do with musb.
Signed-off-by Adam Ford <[email protected]>
Reviewed-by Tom Rini <[email protected]>
board/logicpd/omap3som/Kconfig +0 -0
index 03d272a..68d40dc 100644

Applied to u-boot/master, thanks!

Signature · 8 lines

Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170515/a454666a/attachment.sig>