ARM: dts: omap3: Remove 'enable-active-low' property

PATCH Superseded Fabio Estevam 2 participants 2 messages May 17, 2017 – May 19, 2017 Device tree bindings

lore

Share & tools

lore

Fabio Estevam

author

2017-05-17 16:44 UTC #0 lore raw

PATCH 1/1 ARM: dts: omap3: Remove 'enable-active-low' property

From: Fabio Estevam <[email protected]>

Property 'enable-active-low' does not exist. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default.

So remove the unexisting 'enable-active-low' property.

Signed-off-by Fabio Estevam <[email protected]>

---
 arch/arm/boot/dts/omap3-evm-common.dtsi | 1 -
 arch/arm/boot/dts/omap3-sb-t35.dtsi     | 1 -
 arch/arm/boot/dts/omap3-tao3530.dtsi    | 1 -
 3 files changed, 3 deletions(-)

arch/arm/boot/dts/omap3-evm-common.dtsi +0 -1

index 0904750..7780e25 100644
@@ -76,7 +76,6 @@
 
 &lcd_3v3 {
 	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>;	/* gpio153 */
-	enable-active-low;
 };
 
 &lcd0 {

arch/arm/boot/dts/omap3-sb-t35.dtsi +0 -1

index 73643fa..91e15af 100644
@@ -50,7 +50,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&sb_t35_audio_amp>;
 		gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;   /* gpio_61 */
-		enable-active-low;
 		regulator-always-on;
 	};
 };

arch/arm/boot/dts/omap3-tao3530.dtsi +0 -1

index dc80886b..06ac0f8 100644
@@ -63,7 +63,6 @@
 		regulator-min-microvolt = <3150000>;
 		regulator-max-microvolt = <3150000>;
 		gpio = <&gpio5 29 GPIO_ACTIVE_LOW>;		/* gpio_157 */
-		enable-active-low;
 		startup-delay-us = <10000>;
 	};
 };

Signature · 1 line

2.7.4

Tony Lindgren

2017-05-19 18:41 UTC #1 lore raw

PATCH 1/1 ARM: dts: omap3: Remove 'enable-active-low' property

Quoted 7 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>
Property 'enable-active-low' does not exist. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default.
So remove the unexisting 'enable-active-low' property.

Applying into omap-for-v4.13/dt thanks.

Tony