refpolicy: new package
PATCH v4 1/3 refpolicy: new package
The patch is for adding selinux reference policy (refpolicy). It is a complete SELinux policy that can be used as the system policy for a variety of systems and used as the basis for creating other policies.
---
Changes v3 -> v4:
- Split the REFPOLICY_MAKE define into several lines for formatting cleanliness.
- Added TEST_TOOLCHAIN=$(HOST_DIR) to the REFPOLICY_MAKE define. This fixes repfolicy from attempting to use selinux tools on the host machine. Line 49 of the Makefile shows that userbindir, usersbindir, and sbin dir are set when the TEST_TOOLCHAIN variable is passed to the Makefile. TEST_TOOLCHAIN in this instance looks to match up properly with the HOST_DIR, so pass HOST_DIR as TEST_TOOLCHAIN. This fix has been tested with Debian 8 sid without SELinux installed.
- Removed Coverletter from patch set.
Changes v2 -> v3:
- Removed 0001-fc_sort-use-CFLAGS_FOR_BUILD.patch as this causes compilation problems in the newer refpolicy and doesn't seem to be needed anymore.
Changes v1 -> v2:
- Added cover letter explaining the new patch set.
- Added 0001-fc_sort-use-CFLAGS_FOR_BUILD.patch from previous patch set.
- Readded dependencies from Bryce Ferguson's patch set.
- Readded comment in refpolicy.mk explaining why git submodules is needed.
package/Config.in | 1 + package/refpolicy/Config.in | 37 ++++++++++++++++++++++++++++ package/refpolicy/refpolicy.hash | 2 ++ package/refpolicy/refpolicy.mk | 53 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 93 insertions(+) create mode 100644 package/refpolicy/Config.in create mode 100644 package/refpolicy/refpolicy.hash create mode 100644 package/refpolicy/refpolicy.mk
package/Config.in +1 -0
@@ -1757,6 +1757,7 @@ endmenu menu "Security" source "package/checkpolicy/Config.in" source "package/policycoreutils/Config.in" + source "package/refpolicy/Config.in" source "package/sepolgen/Config.in" source "package/setools/Config.in" endmenu
package/refpolicy/Config.in new file +37 -0
@@ -0,0 +1,37 @@ +config BR2_PACKAGE_REFPOLICY + bool "refpolicy" + depends on BR2_TOOLCHAIN_HAS_THREADS # policycoreutils + depends on BR2_TOOLCHAIN_USES_GLIBC # policycoreutils + depends on BR2_PACKAGE_AUDIT_ARCH_SUPPORTS # libsemanage + depends on BR2_TOOLCHAIN_HAS_THREADS # libsemanage + depends on BR2_TOOLCHAIN_USES_GLIBC # libsemanage + depends on !BR2_STATIC_LIBS #libsemanage + depends on !BR2_arc # libsemanage + select BR2_PACKAGE_POLICYCOREUTILS + select BR2_PACKAGE_BUSYBOX_SELINUX if BR2_PACKAGE_BUSYBOX + help + The SELinux Reference Policy project (refpolicy) is a + complete SELinux policy that can be used as the system + policy for a variety of systems and used as the basis + for creating other policies. Reference Policy was originally + based on the NSA example policy, but aims to accomplish + many additional goals. + + The current refpolicy does not fully support Buildroot + and needs modifications to work with the default system + file layout. These changes should be added as patches to + the refpolicy that modify a single SELinux policy. + + The refpolicy works for the most part in permissive mode. Only + the basic set of utilities are enabled in the example policy + config and some of the pathing in the policies is not correct. + Individual policies would need to be tweaked to get everything + functioning properly. + + https://github.com/TresysTechnology/refpolicy + +comment "refpolicy needs a glibc toolchain w/ threads, dynamic library" + depends on !BR2_arc + depends on BR2_PACKAGE_AUDIT_ARCH_SUPPORTS + depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_USES_GLIBC
package/refpolicy/refpolicy.hash new file +2 -0
@@ -0,0 +1,2 @@ +#From https://github.com/TresysTechnology/refpolicy/wiki/DownloadRelease +sha256 08f9e2afc5e4939c23e56deeec7c47da029d7b85d82fb4ded01a36eb5da0651e refpolicy-RELEASE_2_20170204.tar.gz
package/refpolicy/refpolicy.mk new file +53 -0
53 lines not on this page · raw message
Signature · 1 line
2.9.3
PATCH v4 2/3 refpolicy add ability to specify policy version
Refpolicy by default will build the highest version supported. This may cause older kernels to not load the policy.
This patch adds a custom policy version string which is defaulted to 30, which is the highest supported as of today.
---
Changes v2 -> v3:
- Removed Coverletter from patch set.
Changes v1 -> v2:
- Added cover letter explaining the new patch set.
package/refpolicy/Config.in | 8 ++++++++ package/refpolicy/refpolicy.mk | 2 +- 2 files changed, 9 insertions(+), 1 deletion(-)
package/refpolicy/Config.in +8 -0
@@ -35,3 +35,11 @@ comment "refpolicy needs a glibc toolchain w/ threads, dynamic library" depends on BR2_PACKAGE_AUDIT_ARCH_SUPPORTS depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS || \ !BR2_TOOLCHAIN_USES_GLIBC + +if BR2_PACKAGE_REFPOLICY + +config BR2_PACKAGE_REFPOLICY_VERSION + string "Policy version" + default "30" + +endif
package/refpolicy/refpolicy.mk +1 -1
@@ -32,7 +32,7 @@ REFPOLICY_MAKE = \ $(MAKE1) define REFPOLICY_CONFIGURE_CMDS - $(SED) "/OUTPUT_POLICY/c\OUTPUT_POLICY = 30" $(@D)/build.conf + $(SED) "/OUTPUT_POLICY/c\OUTPUT_POLICY = $(BR2_PACKAGE_REFPOLICY_VERSION)" $(@D)/build.conf $(SED) "/MONOLITHIC/c\MONOLITHIC = y" $(@D)/build.conf $(SED) "/NAME/c\NAME = targeted" $(@D)/build.conf endef
Signature · 1 line
2.9.3
PATCH v4 2/3 refpolicy add ability to specify policy version
Adam,
Quoted 7 lines · Adam Duskett
Refpolicy by default will build the highest version supported. This may cause older kernels to not load the policy.
This patch adds a custom policy version string which is defaulted to 30, which is the highest supported as of today.
Signed-off-by Adam Duskett <[email protected]>
Quoted 47 lines
---
Changes v2 -> v3:
- Removed Coverletter from patch set.Changes v1 -> v2:
- Added cover letter explaining the new patch set.package/refpolicy/Config.in | 8 ++++++++ package/refpolicy/refpolicy.mk | 2 +- 2 files changed, 9 insertions(+), 1 deletion(-)package/refpolicy/Config.in +8
-0@@ -35,3 +35,11 @@ comment "refpolicy needs a glibc toolchain w/ threads, dynamic library" depends on BR2_PACKAGE_AUDIT_ARCH_SUPPORTS depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS || \ !BR2_TOOLCHAIN_USES_GLIBC + +if BR2_PACKAGE_REFPOLICY + +config BR2_PACKAGE_REFPOLICY_VERSION + string "Policy version" + default "30" + +endifpackage/refpolicy/refpolicy.mk +1
-2@@ -32,7 +32,7 @@ REFPOLICY_MAKE = \ $(MAKE1) define REFPOLICY_CONFIGURE_CMDS - $(SED) "/OUTPUT_POLICY/c\OUTPUT_POLICY = 30" $(@D)/build.conf + $(SED) "/OUTPUT_POLICY/c\OUTPUT_POLICY = $(BR2_PACKAGE_REFPOLICY_VERSION)" $(@D)/build.conf $(SED) "/MONOLITHIC/c\MONOLITHIC = y" $(@D)/build.conf $(SED) "/NAME/c\NAME = targeted" $(@D)/build.conf endef --2.9.3
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 8 lines
Matthew L Weber / Pr Software Engineer Airborne Information Systems / Security Systems and Software / Secure Platforms MS 131-100, C Ave NE, Cedar Rapids, IA, 52498, USA www.rockwellcollins.com Note: Any Export License Required Information and License Restricted Third Party Intellectual Property (TPIP) content must be encrypted and sent to matthew.weber at corp.rockwellcollins.com.
PATCH v4 2/3 refpolicy add ability to specify policy version
In reply to Adam DuskettHello,
Quoted 7 lines · Adam Duskett
Refpolicy by default will build the highest version supported. This may cause older kernels to not load the policy.
This patch adds a custom policy version string which is defaulted to 30, which is the highest supported as of today.
Signed-off-by Adam Duskett <[email protected]>
I've applied, after doing some minor changes. See below.
Quoted 1 line
+config
BR2_PACKAGE_REFPOLICY_VERSION
I've renamed this option to:
BR2_PACKAGE_REFPOLICY_POLICY_VERSION
see below why.
Quoted 9 lines
package/refpolicy/Config.in +4
-0+ string "Policy version" + default "30" + +endifpackage/refpolicy/refpolicy.mk +0
-0
package/refpolicy/refpolicy.mk REFPOLICY_MAKE = \ · line 35
Quoted 5 lines
package/refpolicy/refpolicy.mk +1
-1@@ -32,7 +32,7 @@ REFPOLICY_MAKE = \ $(MAKE1) define REFPOLICY_CONFIGURE_CMDS - $(SED) "/OUTPUT_POLICY/c\OUTPUT_POLICY = 30" $(@D)/build.conf + $(SED) "/OUTPUT_POLICY/c\OUTPUT_POLICY = $(BR2_PACKAGE_REFPOLICY_VERSION)" $(@D)/build.conf
This adds some double quotes which were not present before. And we normally qstrip string Config.in options in Buildroot.
If I had kept your original Config.in option name, it would have given
REFPOLICY_VERSION = $(call qstrip,$(BR2_PACKAGE_REFPOLICY_VERSION))
except that REFPOLICY_VERSION would override the version of the package.
So I've changed the code to:
+REFPOLICY_POLICY_VERSION = \
+ $(call qstrip,$(BR2_PACKAGE_REFPOLICY_POLICY_VERSION))
+
define REFPOLICY_CONFIGURE_CMDS
- $(SED) "/OUTPUT_POLICY/c\OUTPUT_POLICY = 30" $(@D)/build.conf
+ $(SED) "/OUTPUT_POLICY/c\OUTPUT_POLICY = $(REFPOLICY_POLICY_VERSION)" \
+ $(@D)/build.conf
$(SED) "/MONOLITHIC/c\MONOLITHIC = y" $(@D)/build.conf
$(SED) "/NAME/c\NAME = targeted" $(@D)/build.confendef
Please check that everything still works fine for you.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
PATCH v4 3/3 refpolicy: add ability to set default state.
In reply to Adam DuskettSELinux requires a config file in /etc/selinux which controls the state of SELinux on the system.
This config file has two options set in it:
SELINUX which set's the state of selinux on boot.
SELINUXTYPE which should equal the name of the policy. In this case, the default name is targeted.
This patch adds:
- A choice menu on Config.in that allows the user to select a default SELinux state.
- A basic config file that will be installed to target/etc/selinux and will set SELINUX= to the selected state.
---
Changes v3 -> v4:
- Removed a trailing newline in refpolicy/config
- Removed Coverletter from patch set.
Changes v2 -> v3:
- No changes.
Changes v1 -> v2:
- Added cover letter explaining the new patch set.
package/refpolicy/Config.in | 26 ++++++++++++++++++++++++++ package/refpolicy/config | 8 ++++++++ package/refpolicy/refpolicy.mk | 6 ++++++ 3 files changed, 40 insertions(+) create mode 100644 package/refpolicy/config
package/refpolicy/Config.in +26 -0
@@ -42,4 +42,30 @@ config BR2_PACKAGE_REFPOLICY_VERSION string "Policy version" default "30" +choice + prompt "SELinux default state" + default BR2_PACKAGE_REFPOLICY_STATE_PERMISSIVE + +config BR2_PACKAGE_REFPOLICY_STATE_ENFORCING + bool "Enforcing" + help + SELinux security policy is enforced + +config BR2_PACKAGE_REFPOLICY_STATE_PERMISSIVE + bool "Permissive" + help + SELinux prints warnings instead of enforcing + +config BR2_PACKAGE_REFPOLICY_STATE_DISABLED + bool "Disabled" + help + No SELinux policy is loaded +endchoice + +config BR2_PACKAGE_REFPOLICY_STATE + string + default "permissive" if BR2_PACKAGE_REFPOLICY_STATE_PERMISSIVE + default "enforcing" if BR2_PACKAGE_REFPOLICY_STATE_ENFORCING + default "disabled" if BR2_PACKAGE_REFPOLICY_STATE_DISABLED + endif
package/refpolicy/config new file +8 -0
@@ -0,0 +1,8 @@ +# This file controls the state of SELinux on the system. +# SELINUX= can take one of these three values: +# enforcing - SELinux security policy is enforced. +# permissive - SELinux prints warnings instead of enforcing. +# disabled - No SELinux policy is loaded. +SELINUX=disabled + +SELINUXTYPE=targeted
package/refpolicy/refpolicy.mk +6 -0
@@ -23,6 +23,7 @@ REFPOLICY_DEPENDENCIES += \ policycoreutils REFPOLICY_PYINC = -I$(HOST_DIR)/usr/include/python$(PYTHON_VERSION_MAJOR)/site-packages +REFPOLICY_NAME = "targeted" # Cannot use multiple threads to build the reference policy REFPOLICY_MAKE = \
@@ -48,6 +49,11 @@ endef define REFPOLICY_INSTALL_TARGET_CMDS $(REFPOLICY_MAKE) -C $(@D) install DESTDIR=$(TARGET_DIR) + $(INSTALL) -m 0755 -D package/refpolicy/config \ + $(TARGET_DIR)/etc/selinux/config + + $(SED) "/^SELINUX=/c\SELINUX=$(BR2_PACKAGE_REFPOLICY_STATE)" \ + $(TARGET_DIR)/etc/selinux/config endef $(eval $(generic-package))
Signature · 1 line
2.9.3
PATCH v4 3/3 refpolicy: add ability to set default state.
Adam,
Quoted 8 lines · Adam Duskett
SELinux requires a config file in
/etc/selinuxwhich controls the state of SELinux on the system.This config file has two options set in it:
SELINUX which set's the state of selinux on boot.
SELINUXTYPE which should equal the name of the policy. In this case, the default name is targeted.
Quoted 8 lines
This patch adds:
- A choice menu on Config.in that allows the user to select a default SELinux state.- A basic config file that will be installed to target/etc/selinux and will set SELINUX= to the selected state.
Signed-off-by Adam Duskett <[email protected]>
PATCH v4 3/3 refpolicy: add ability to set default state.
In reply to Adam DuskettHello,
Quoted 8 lines · Adam Duskett
SELinux requires a config file in
/etc/selinuxwhich controls the state of SELinux on the system.This config file has two options set in it:
SELINUX which set's the state of selinux on boot.
SELINUXTYPE which should equal the name of the policy. In this case, the default name is targeted.
Quoted 8 lines
This patch adds:
- A choice menu on Config.in that allows the user to select a default SELinux state.- A basic config file that will be installed to target/etc/selinux and will set SELINUX= to the selected state.
Signed-off-by Adam Duskett <[email protected]>
I've applied, after doing a few changes as well.
Quoted 15 lines
(quoted diff) +15
-0+choice + prompt "SELinux default state" + default BR2_PACKAGE_REFPOLICY_STATE_PERMISSIVE + +config BR2_PACKAGE_REFPOLICY_STATE_ENFORCING + bool "Enforcing" + help + SELinux security policy is enforced + +config BR2_PACKAGE_REFPOLICY_STATE_PERMISSIVE + bool "Permissive" + help + SELinux prints warnings instead of enforcing + +config BR2_PACKAGE_REFPOLICY_STATE_DISABLED
Review
Quoted 10 lines
(quoted diff) +10
-0+ bool "Disabled" + help + No SELinux policy is loaded +endchoice + +config BR2_PACKAGE_REFPOLICY_STATE + string + default "permissive" if BR2_PACKAGE_REFPOLICY_STATE_PERMISSIVE + default "enforcing" if BR2_PACKAGE_REFPOLICY_STATE_ENFORCING + default "disabled" if BR2_PACKAGE_REFPOLICY_STATE_DISABLED
To be consistent with the other option, I've renamed all options to BR2_PACKAGE_REFPOLICY_POLICY_STATE_xyz.
Quoted 2 lines
REFPOLICY_PYINC= -I$(HOST_DIR)/usr/include/python$(PYTHON_VERSION_MAJOR)/site-packages
+REFPOLICY_NAME = "targeted"
This variable is unused, so I dropped it.
Review
Quoted 7 lines
define
REFPOLICY_INSTALL_TARGET_CMDS(quoted diff) +5
-0$(REFPOLICY_MAKE) -C $(@D) install DESTDIR=$(TARGET_DIR) + $(INSTALL) -m 0755 -D package/refpolicy/config \ + $(TARGET_DIR)/etc/selinux/config + + $(SED) "/^SELINUX=/c\SELINUX=$(BR2_PACKAGE_REFPOLICY_STATE)" \ + $(TARGET_DIR)/etc/selinux/config
And I've added a qstripped version this variable. So the code looks like this:
package/refpolicy/refpolicy.mk +6 -0
@@ -31,6 +31,8 @@ REFPOLICY_MAKE = \ REFPOLICY_POLICY_VERSION = \ $(call qstrip,$(BR2_PACKAGE_REFPOLICY_POLICY_VERSION)) +REFPOLICY_POLICY_STATE = \ + $(call qstrip,$(BR2_PACKAGE_REFPOLICY_POLICY_STATE)) define REFPOLICY_CONFIGURE_CMDS $(SED) "/OUTPUT_POLICY/c\OUTPUT_POLICY = $(REFPOLICY_POLICY_VERSION)" \
@@ -50,6 +52,10 @@ endef define REFPOLICY_INSTALL_TARGET_CMDS $(REFPOLICY_MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) install + $(INSTALL) -m 0755 -D package/refpolicy/config \ + $(TARGET_DIR)/etc/selinux/config + $(SED) "/^SELINUX=/c\SELINUX=$(REFPOLICY_POLICY_STATE)" \ + $(TARGET_DIR)/etc/selinux/config endef
Once again, please test that everything still works fine for you after my changes.
Thanks a lot for this work on refpolicy.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
PATCH v4 1/3 refpolicy: new package
In reply to Adam DuskettAdam,
Quoted 6 lines · Adam Duskett
The patch is for adding selinux reference policy (refpolicy). It is a complete SELinux policy that can be used as the system policy for a variety of systems and used as the basis for creating other policies.
Signed-off-by Adam Duskett <[email protected]>---
Please list the person who suggested the change or group by the person requesting the change.
https://buildroot.org/downloads/manual/manual.html#submitting-patches
21.5.4. Patch revision changelog
Quoted 12 lines
Changes v3 -> v4:
- Split theREFPOLICY_MAKEdefine into several lines for formatting cleanliness.
- Added TEST_TOOLCHAIN=$(HOST_DIR) to theREFPOLICY_MAKEdefine. This fixes repfolicy from attempting to use selinux tools on the host machine. Line 49 of theMakefileshows that userbindir, usersbindir, and sbin dir are set when theTEST_TOOLCHAINvariable is passed to theMakefile.TEST_TOOLCHAINin this instance looks to match up properly with theHOST_DIR, so passHOST_DIRasTEST_TOOLCHAIN. This fix has been tested with Debian 8 sid without SELinux installed.
- Removed Coverletter from patch set.
<snip>
test-pkg tested this patch series against the following. Plus my own personal development use of refpolicy.
# BR2_PACKAGE_CHECKPOLICY is not set BR2_PACKAGE_POLICYCOREUTILS=y
# BR2_PACKAGE_POLICYCOREUTILS_AUDIT2ALLOW is not set # BR2_PACKAGE_POLICYCOREUTILS_RESTORECOND is not set BR2_PACKAGE_REFPOLICY=y BR2_PACKAGE_REFPOLICY_VERSION="30"
# BR2_PACKAGE_REFPOLICY_STATE_ENFORCING is not set BR2_PACKAGE_REFPOLICY_STATE_PERMISSIVE=y
# BR2_PACKAGE_REFPOLICY_STATE_DISABLED is not set BR2_PACKAGE_REFPOLICY_STATE="permissive"
# BR2_PACKAGE_REFPOLICY_CUSTOM_GIT is not set # BR2_PACKAGE_SEPOLGEN is not set BR2_PACKAGE_SETOOLS=y
### Limited # of builds because of BR2_PACKAGE_AUDIT_ARCH_SUPPORTS (arm/powerpc/intel)
armv5-ctng-linux-gnueabi [ 1/49]: OK
armv7-ctng-linux-gnueabihf [ 2/49]: OK
br-aarch64-glibc [ 3/49]: OK
br-arm-cortex-a9-glibc [ 6/49]: OK
br-powerpc64-power7-glibc [26/49]: OK
i686-ctng-linux-gnu [34/49]: OKPATCH v4 1/3 refpolicy: new package
In reply to Adam DuskettHello Adam,
Quoted 3 lines · Adam Duskett
The patch is for adding selinux reference policy (refpolicy). It is a complete SELinux policy that can be used as the system policy for a variety of systems and used as the basis for creating other policies.
I've applied, after doing a few fixes. I also have one question. See below.
Quoted 4 lines
package/Config.in | 1 + package/refpolicy/Config.in | 37 ++++++++++++++++++++++++++++ package/refpolicy/refpolicy.hash | 2 ++ package/refpolicy/refpolicy.mk | 53 ++++++++++++++++++++++++++++++++++++++++
Entry to DEVELOPERS file missing.
package/refpolicy/Config.in line 8
Quoted 8 lines
package/refpolicy/Config.in new file +8
-0+config BR2_PACKAGE_REFPOLICY + bool "refpolicy" + depends on BR2_TOOLCHAIN_HAS_THREADS # policycoreutils + depends on BR2_TOOLCHAIN_USES_GLIBC # policycoreutils + depends on BR2_PACKAGE_AUDIT_ARCH_SUPPORTS # libsemanage + depends on BR2_TOOLCHAIN_HAS_THREADS # libsemanage + depends on BR2_TOOLCHAIN_USES_GLIBC # libsemanage + depends on !BR2_STATIC_LIBS #libsemanage
Repeating dependencies is useless. Also having as a comment a package that isn't selected by refpolicy doesn't make sense. I've fixed this.
package/refpolicy/Config.in line 9
Quoted 1 line
package/refpolicy/Config.in new file +1
-0+ depends on !BR2_arc # libsemanage
Ditto.
package/refpolicy/refpolicy.mk line 13
Quoted 5 lines
package/refpolicy/refpolicy.mk new file +5
-0+# Do not use GitHub helper as git submodules are needed for refpolicy-contrib +REFPOLICY_SITE = https://github.com/TresysTechnology/refpolicy.git +REFPOLICY_SITE_METHOD = git +REFPOLICY_GIT_SUBMODULES = y # Required for refpolicy-contrib +REFPOLICY_LICENSE = GPLv2
We use SPDX license tags now, so GPL-2.0.
package/refpolicy/refpolicy.mk line 16
Quoted 3 lines
package/refpolicy/refpolicy.mk new file +3
-0+REFPOLICY_LICENSE_FILES = COPYING +REFPOLICY_INSTALL_STAGING = YES +REFPOLICY_DEPENDENCIES += \
+= not needed here.
package/refpolicy/refpolicy.mk line 25
Quoted 9 lines
package/refpolicy/refpolicy.mk new file +9
-0+ host-m4 \ + host-checkpolicy \ + host-policycoreutils \ + host-setools \ + host-gawk \ + host-python \ + policycoreutils + +REFPOLICY_PYINC = -I$(HOST_DIR)/usr/include/python$(PYTHON_VERSION_MAJOR)/site-packages
Variable unused, so dropped.
Quoted 5 lines
package/refpolicy/refpolicy.mk new file +5
-0+# Cannot use multiple threads to build the reference policy +REFPOLICY_MAKE = \ + TEST_TOOLCHAIN=$(HOST_DIR) \ + PYTHON="$(HOST_DIR)/usr/bin/python2" \ + $(TARGET_MAKE_ENV) \
package/refpolicy/refpolicy.mk line 41
Quoted 10 lines
package/refpolicy/refpolicy.mk new file +10
-0+ $(MAKE1) + +define REFPOLICY_CONFIGURE_CMDS + $(SED) "/OUTPUT_POLICY/c\OUTPUT_POLICY = 30" $(@D)/build.conf + $(SED) "/MONOLITHIC/c\MONOLITHIC = y" $(@D)/build.conf + $(SED) "/NAME/c\NAME = targeted" $(@D)/build.conf +endef + +define REFPOLICY_BUILD_CMDS + $(REFPOLICY_MAKE) -C $(@D) bare conf DESTDIR=$(STAGING_DIR)
We usually put DESTDIR before the targets, so changed.
package/refpolicy/refpolicy.mk line 46
Quoted 5 lines
package/refpolicy/refpolicy.mk new file +5
-0+endef + +define REFPOLICY_INSTALL_STAGING_CMDS + $(REFPOLICY_MAKE) -C $(@D) install-src install-headers \ + DESTDIR=$(STAGING_DIR)
Second line should be indented with two tabs.
package/refpolicy/refpolicy.mk line 51
Quoted 5 lines
package/refpolicy/refpolicy.mk new file +5
-0+endef + +define REFPOLICY_INSTALL_TARGET_CMDS + $(REFPOLICY_MAKE) -C $(@D) install DESTDIR=$(TARGET_DIR) +endef
My question is: why "install-src install-headers" for staging and just "install" for target ?
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com