SKL render decompression support
Subsystems (3)
cover SKL render decompression support
Hi,
Here's the kernel counterpart to the Mesa series exposing Y-tiled CCS at:
https://lists.freedesktop.org/archives/mesa-dev/2017-May/156184.html
All the patches are Ville's, I've just rebased and squashed. They depend on Ben's last modifier-advertisement series, plus the fixup I sent in reply to that.
They may want to be squashed/split differently, and Yf-tiled CCS is totally untested.
I've been using Weston as a test vehicle, built from the atomic series which is currently blocked on review for earlier parts, and cleanups for the latter parts:git://git.collabora.com/git/user/daniels/weston # wip/2017-04/atomic-v11-WIP
I'm currently dying of the flu & away next week as well, so anyone who wants this done sooner should just take this over and not block on me.
Cheers,
Daniel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
RFC PATCH 1/3 drm: Add explict alignment for formats
From: Ville Syrjälä <[email protected]>
hsub and vsub are used to indicate format subsampling, and currently framebuffers cannot be allocated with a width not aligned to this value. However, for auxiliary compressed planes this is undesirable: the generic userspace does not know to quantise width/height, but the non-generic allocator can pad the stride/size in an acceptable way.
Add explicit halign/valign members which allow a particular format to have more loose (or strict) alignment requirements than its subsampling.
--- drivers/gpu/drm/drm_framebuffer.c | 7 +++++-- include/drm/drm_fourcc.h | 2 ++ 2 files changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/drm_framebuffer.c +5 -2
@@ -149,6 +149,7 @@ static int framebuffer_check(struct drm_device *dev, const struct drm_mode_fb_cmd2 *r) {const struct drm_format_info *info; +int halign, valign;int i;/* check if the format is supported at all */
@@ -164,12 +165,14 @@ static int framebuffer_check(struct drm_device *dev,/* now let the driver pick its own format info */ info =drm_get_format_info (dev, r); -if (r->width ==0 ) { + halign = info->halign ? : info->hsub; +if (r->width ==0 || r->width % halign){DRM_DEBUG_KMS ("bad framebuffer width %u\n" , r->width);return -EINVAL ; } -if (r->height ==0 ) { + valign = info->valign ? : info->vsub; +if (r->height ==0 || r->height % valign) {DRM_DEBUG_KMS ("bad framebuffer height %u\n" , r->height);return -EINVAL ; }
include/drm/drm_fourcc.h +2 -0
@@ -46,6 +46,8 @@ struct drm_format_info {u8 cpp[3 ];u8 hsub;u8 vsub; +u8 halign;/* specified only if != hsub */ +u8 valign;/* specified only if != vsub */ };/**
Signature · 6 lines
2.11.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
RFC PATCH 2/3 drm/i915: Implement .get_format_info() hook for CCS
In reply to Daniel StoneFrom: Ville Syrjälä <[email protected]>
SKL+ display engine can scan out certain kinds of compressed surfaces produced by the render engine. This involved telling the display engine the location of the color control surfae (CCS) which describes which parts of the main surface are compressed and which are not. The location of CCS is provided by userspace as just another plane with its own offset.
By providing our own format information for the CCS formats, we should be able to make framebuffer_check() do the right thing for the CCS surface as well.
Note that we'll return the same format info for both Y and Yf tiled format as that's what happens with the non-CCS Y vs. Yf as well. If desired, we could potentially return a unique pointer for each pixel_format+tiling+ccs combination, in which case we immediately be able to tell if any of that stuff changed by just comparing the pointers. But that does sound a bit wasteful space wise.
v2: Drop the 'dev' argument from the hook
v3: Include the description of the CCS surface layout
v4: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)
--- drivers/gpu/drm/i915/intel_display.c | 51 ++++++++++++++++++++++++++++++++++++ include/uapi/drm/drm_fourcc.h | 20 ++++++++++++++ 2 files changed, 71 insertions(+)
drivers/gpu/drm/i915/intel_display.c +51 -0
@@ -2452,6 +2452,56 @@ static unsigned int intel_fb_modifier_to_tiling(uint64_t fb_modifier) } } +/* +* 1 byte of CCS actually corresponds to 16x8 pixels on the main +* surface, and the memory layout for the CCS tile us 64x64 bytes. +* But since we're pretending the CCS tile is 128 bytes wide we +* adjust hsub/vsub here accordingly to 8x16 so that the +* bytes<->x/y conversions come out correct. We don't require any +* CCS block size alignment of the fb under the assumption that the +* hardware will handle things correctly of only a single pixel +* gets touched. The compression should be lossless so any garbage +* pixels as part of the same block shouldn't cause visual artifacts. +*/ +static const struct drm_format_info ccs_formats[] = { + { .format =DRM_FORMAT_XRGB8888 , .depth =24 , .num_planes =2 , .cpp = {4 ,1 , }, + .hsub =8 , .vsub =16 , .halign =1 , .valign =1 , }, + { .format =DRM_FORMAT_XBGR8888 , .depth =24 , .num_planes =2 , .cpp = {4 ,1 , }, + .hsub =8 , .vsub =16 , .halign =1 , .valign =1 , }, + { .format =DRM_FORMAT_ARGB8888 , .depth =32 , .num_planes =2 , .cpp = {4 ,1 , }, + .hsub =8 , .vsub =16 , .halign =1 , .valign =1 , }, + { .format =DRM_FORMAT_ABGR8888 , .depth =32 , .num_planes =2 , .cpp = {4 ,1 , }, + .hsub =8 , .vsub =16 , .halign =1 , .valign =1 , }, +}; + +static const struct drm_format_info * +lookup_format_info (const struct drm_format_info formats[], +int num_formats,u32 format) +{ +int i; + +for (i =0 ; i < num_formats; i++) { +if (formats[i].format == format) +return &formats[i]; + } + +return NULL ; +} + +static const struct drm_format_info * +intel_get_format_info (const struct drm_mode_fb_cmd2 *cmd) +{ +switch (cmd->modifier[0 ]) { +case I915_FORMAT_MOD_Y_TILED_CCS : +case I915_FORMAT_MOD_Yf_TILED_CCS: +return lookup_format_info (ccs_formats, +ARRAY_SIZE (ccs_formats), + cmd->pixel_format); +default : +return NULL ; + } +} +static int intel_fill_fb_info (struct drm_i915_private *dev_priv,struct drm_framebuffer *fb)
@@ -14725,6 +14775,7 @@ static void intel_atomic_state_free(struct drm_atomic_state *state)static const struct drm_mode_config_funcs intel_mode_funcs = { .fb_create = intel_user_framebuffer_create, + .get_format_info = intel_get_format_info, .output_poll_changed = intel_fbdev_output_poll_changed, .atomic_check = intel_atomic_check, .atomic_commit = intel_atomic_commit,
include/uapi/drm/drm_fourcc.h +20 -0
@@ -263,6 +263,26 @@ extern "C" {#define I915_FORMAT_MOD_Yf_TILED fourcc_mod_code(INTEL, 3)/* +* Intel color control surface (CCS) for render compression +* +* The framebuffer format must be one of the 8:8:8:8 RGB formats. +* The main surface will be plane index 0 and must be Y/Yf-tiled, +* the CCS will be plane index 1. +* +* Each CCS tile matches a 1024x512 pixel area of the main surface. +* To match certain aspects of the 3D hardware the CCS is +* considered to be made up of normal 128Bx32 Y tiles, Thus +* the CCS pitch must be specified in multiples of 128 bytes. +* +* In reality the CCS tile appears to be a 64Bx64 Y tile, composed +* of QWORD (8 bytes) chunks instead of OWORD (16 bytes) chunks. +* But that fact is not relevant unless the memory is accessed +* directly. +*/ +#define I915_FORMAT_MOD_Y_TILED_CCS fourcc_mod_code(INTEL, 4) +#define I915_FORMAT_MOD_Yf_TILED_CCS fourcc_mod_code(INTEL, 5) + +/* * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks * * Macroblocks are laid in a Z-shape, and each pixel data is following the
Signature · 6 lines
2.11.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
RFC PATCH 3/3 drm/i915: Add render decompression support
In reply to Daniel StoneFrom: Ville Syrjälä <[email protected]>
SKL+ display engine can scan out certain kinds of compressed surfaces produced by the render engine. This involved telling the display engine the location of the color control surfae (CCS) which describes which parts of the main surface are compressed and which are not. The location of CCS is provided by userspace as just another plane with its own offset.
Add the required stuff to validate the user provided AUX plane metadata and convert the user provided linear offset into something the hardware can consume.
Due to hardware limitations we require that the main surface and the AUX surface (CCS) be part of the same bo. The hardware also makes life hard by not allowing you to provide separate x/y offsets for the main and AUX surfaces (excpet with NV12), so finding suitable offsets for both requires a bit of work. Assuming we still want keep playing tricks with the offsets. I've just gone with a dumb "search backward for suitable offsets" approach, which is far from optimal, but it works.
Also not all planes will be capable of scanning out compressed surfaces, and eg. 90/270 degree rotation is not supported in combination with decompression either.
This patch may contain work from at least the following people:
* Vandana Kannan <[email protected]>
* Daniel Vetter <[email protected]>
* Ben Widawsky <[email protected]>
v2: Deal with display workarounds 0390, 0531, 1125 (Paulo)
v3: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)
Put the AUX register defines to the correct place Fix up the slightly bogus rotation check
v4: Advertise modifiers (Daniel)
--- drivers/gpu/drm/i915/i915_reg.h | 23 ++++ drivers/gpu/drm/i915/intel_display.c | 259 ++++++++++++++++++++++++++++++++--- drivers/gpu/drm/i915/intel_pm.c | 29 +++- drivers/gpu/drm/i915/intel_sprite.c | 7 + 4 files changed, 299 insertions(+), 19 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +23 -0
@@ -5905,6 +5905,10 @@ enum {#define _PLANE_KEYMSK_2_A 0x70298#define _PLANE_KEYMAX_1_A 0x701a0#define _PLANE_KEYMAX_2_A 0x702a0 +#define _PLANE_AUX_DIST_1_A 0x701c0 +#define _PLANE_AUX_DIST_2_A 0x702c0 +#define _PLANE_AUX_OFFSET_1_A 0x701c4 +#define _PLANE_AUX_OFFSET_2_A 0x702c4#define _PLANE_COLOR_CTL_1_A 0x701CC/* GLK+ */ #define _PLANE_COLOR_CTL_2_A 0x702CC/* GLK+ */ #define _PLANE_COLOR_CTL_3_A 0x703CC/* GLK+ */
@@ -6011,6 +6015,24 @@ enum {#define PLANE_NV12_BUF_CFG (pipe, plane) \ _MMIO_PLANE(plane, _PLANE_NV12_BUF_CFG_1(pipe), _PLANE_NV12_BUF_CFG_2(pipe)) +#define _PLANE_AUX_DIST_1_B 0x711c0 +#define _PLANE_AUX_DIST_2_B 0x712c0 +#define _PLANE_AUX_DIST_1 (pipe) \ + _PIPE(pipe, _PLANE_AUX_DIST_1_A, _PLANE_AUX_DIST_1_B) +#define _PLANE_AUX_DIST_2 (pipe) \ + _PIPE(pipe, _PLANE_AUX_DIST_2_A, _PLANE_AUX_DIST_2_B) +#define PLANE_AUX_DIST (pipe, plane) \ + _MMIO_PLANE(plane, _PLANE_AUX_DIST_1(pipe), _PLANE_AUX_DIST_2(pipe)) + +#define _PLANE_AUX_OFFSET_1_B 0x711c4 +#define _PLANE_AUX_OFFSET_2_B 0x712c4 +#define _PLANE_AUX_OFFSET_1 (pipe) \ + _PIPE(pipe, _PLANE_AUX_OFFSET_1_A, _PLANE_AUX_OFFSET_1_B) +#define _PLANE_AUX_OFFSET_2 (pipe) \ + _PIPE(pipe, _PLANE_AUX_OFFSET_2_A, _PLANE_AUX_OFFSET_2_B) +#define PLANE_AUX_OFFSET (pipe, plane) \ + _MMIO_PLANE(plane, _PLANE_AUX_OFFSET_1(pipe), _PLANE_AUX_OFFSET_2(pipe)) +#define _PLANE_COLOR_CTL_1_B 0x711CC#define _PLANE_COLOR_CTL_2_B 0x712CC#define _PLANE_COLOR_CTL_3_B 0x713CC
@@ -6494,6 +6516,7 @@ enum {# define CHICKEN3_DGMG_DONE_FIX_DISABLE (1 << 2)#define CHICKEN_PAR1_1 _MMIO(0x42080) +#define SKL_RC_HASH_OUTSIDE (1 << 15)#define DPA_MASK_VBLANK_SRD (1 << 15)#define FORCE_ARB_IDLE_PLANES (1 << 14)#define SKL_EDP_PSR_FIX_RDWRAP (1 << 3)
drivers/gpu/drm/i915/intel_display.c +242 -17
420 lines not on this page · raw message
drivers/gpu/drm/i915/intel_pm.c +27 -2
@@ -62,6 +62,20 @@ static void gen9_init_clock_gating(struct drm_i915_private *dev_priv)I915_WRITE (CHICKEN_PAR1_1 ,I915_READ (CHICKEN_PAR1_1 ) |SKL_EDP_PSR_FIX_RDWRAP ); +/* +* Display WA#0390: skl,bxt,kbl,glk +* +* Must match Sampler, Pixel Back End, and Media +* (0xE194 bit 8, 0x7014 bit 13, 0x4DDC bits 27 and 31). +* +* Including bits outside the page in the hash would +* require 2 (or 4?) MiB alignment of resources. Just +* assume the defaul hashing mode which only uses bits +* within the page. +*/ +I915_WRITE (CHICKEN_PAR1_1 , +I915_READ (CHICKEN_PAR1_1 ) & ~SKL_RC_HASH_OUTSIDE ); +I915_WRITE (GEN8_CONFIG0 ,I915_READ (GEN8_CONFIG0 ) |GEN9_DEFAULT_FIXES );
@@ -3972,7 +3986,9 @@ skl_ddb_min_alloc(const struct drm_plane_state *pstate,/* For Non Y-tile return 8-blocks */ if (fb->modifier !=I915_FORMAT_MOD_Y_TILED && - fb->modifier != I915_FORMAT_MOD_Yf_TILED) + fb->modifier != I915_FORMAT_MOD_Yf_TILED && + fb->modifier !=I915_FORMAT_MOD_Y_TILED_CCS && + fb->modifier != I915_FORMAT_MOD_Yf_TILED_CCS)return 8 ; src_w =drm_rect_width (&intel_pstate->base.src) >>16 ;
@@ -4276,7 +4292,9 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv, } y_tiled = fb->modifier ==I915_FORMAT_MOD_Y_TILED || - fb->modifier == I915_FORMAT_MOD_Yf_TILED; + fb->modifier == I915_FORMAT_MOD_Yf_TILED || + fb->modifier ==I915_FORMAT_MOD_Y_TILED_CCS || + fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS; x_tiled = fb->modifier ==I915_FORMAT_MOD_X_TILED ;/* Display WA #1141: kbl. */
@@ -4372,6 +4390,13 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv, res_lines =div_round_up_fixed16 (selected_result, plane_blocks_per_line); +/* Display WA #1125: skl,bxt,kbl,glk */ +if (level ==0 && + (fb->modifier ==I915_FORMAT_MOD_Y_TILED_CCS || + fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS)) + res_blocks +=fixed_16_16_to_u32_round_up (y_tile_minimum); + +/* Display WA #1126: skl,bxt,kbl,glk */ if (level >=1 && level <=7 ) {if (y_tiled) { res_blocks +=fixed_16_16_to_u32_round_up (y_tile_minimum);
drivers/gpu/drm/i915/intel_sprite.c +7 -0
@@ -224,6 +224,7 @@ skl_update_plane(struct intel_plane *plane,u32 surf_addr = plane_state->main.offset;unsigned int rotation = plane_state->base.rotation;u32 stride =skl_plane_stride (fb,0 , rotation); +u32 aux_stride =skl_plane_stride (fb,1 , rotation);int crtc_x = plane_state->base.dst.x1;int crtc_y = plane_state->base.dst.y1;uint32_t crtc_w =drm_rect_width (&plane_state->base.dst);
@@ -258,6 +259,10 @@ skl_update_plane(struct intel_plane *plane,I915_WRITE_FW (PLANE_OFFSET (pipe, plane_id), (y <<16 ) | x);I915_WRITE_FW (PLANE_STRIDE (pipe, plane_id), stride);I915_WRITE_FW (PLANE_SIZE (pipe, plane_id), (src_h <<16 ) | src_w); +I915_WRITE_FW (PLANE_AUX_DIST (pipe, plane_id), + (plane_state->aux.offset - surf_addr) | aux_stride); +I915_WRITE_FW (PLANE_AUX_OFFSET (pipe, plane_id), + (plane_state->aux.y <<16 ) | plane_state->aux.x);/* program plane scaler */ if (plane_state->scaler_id >=0 ) {
@@ -1060,6 +1065,8 @@ static uint32_t skl_plane_formats[] = { };static const uint64_t skl_plane_format_modifiers[] = { +I915_FORMAT_MOD_Y_TILED_CCS , + I915_FORMAT_MOD_Yf_TILED_CCS, I915_FORMAT_MOD_Yf_TILED,I915_FORMAT_MOD_Y_TILED ,I915_FORMAT_MOD_X_TILED ,
Signature · 6 lines
2.11.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for SKL render decompression support
In reply to Daniel Stone== Series Details ==
== Series Details ==
Series: SKL render decompression support
URL : https://patchwork.freedesktop.org/series/24838/
State : success
== Summary ==
Series 24838v1 SKL render decompression support
https://patchwork.freedesktop.org/api/1.0/series/24838/revisions/1/mbox/
fi-bdw-gvtdvm total:278 pass:256 dwarn:8 dfail:0 fail:0 skip:14 time:436s fi-skl-gvtdvm total:278 pass:265 dwarn:0 dfail:0 fail:0 skip:13 time:448s
fi-bdw-5557u failed to collect. IGT log at Patchwork_4786/fi-bdw-5557u/igt.log fi-bsw-n3050 failed to collect. IGT log at Patchwork_4786/fi-bsw-n3050/igt.log fi-bxt-j4205 failed to collect. IGT log at Patchwork_4786/fi-bxt-j4205/igt.log fi-byt-j1900 failed to collect. IGT log at Patchwork_4786/fi-byt-j1900/igt.log fi-byt-n2820 failed to collect. IGT log at Patchwork_4786/fi-byt-n2820/igt.log fi-hsw-4770 failed to collect. IGT log at Patchwork_4786/fi-hsw-4770/igt.log fi-hsw-4770r failed to collect. IGT log at Patchwork_4786/fi-hsw-4770r/igt.log fi-ilk-650 failed to collect. IGT log at Patchwork_4786/fi-ilk-650/igt.log fi-ivb-3520m failed to collect. IGT log at Patchwork_4786/fi-ivb-3520m/igt.log fi-ivb-3770 failed to collect. IGT log at Patchwork_4786/fi-ivb-3770/igt.log fi-kbl-7500u failed to collect. IGT log at Patchwork_4786/fi-kbl-7500u/igt.log fi-kbl-7560u failed to collect. IGT log at Patchwork_4786/fi-kbl-7560u/igt.log fi-skl-6260u failed to collect. IGT log at Patchwork_4786/fi-skl-6260u/igt.log fi-skl-6700hq failed to collect. IGT log at Patchwork_4786/fi-skl-6700hq/igt.log fi-skl-6700k failed to collect. IGT log at Patchwork_4786/fi-skl-6700k/igt.log fi-skl-6770hq failed to collect. IGT log at Patchwork_4786/fi-skl-6770hq/igt.log fi-snb-2520m failed to collect. IGT log at Patchwork_4786/fi-snb-2520m/igt.log fi-snb-2600 failed to collect. IGT log at Patchwork_4786/fi-snb-2600/igt.log
c6d01bed4870cb979003bbbfb38b0e7ebf036794 drm-tip: 2017y-05m-23d-14h-42m-41s UTC integration manifest e98bbaa0 drm/i915: Implement .get_format_info() hook for CCS
f3722c5 drm: Add explict alignment for formats
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4786/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for SKL render decompression support
In reply to Daniel Stone== Series Details ==
== Series Details ==
Series: SKL render decompression support
URL : https://patchwork.freedesktop.org/series/24838/
State : success
== Summary ==
Series 24838v1 SKL render decompression support
https://patchwork.freedesktop.org/api/1.0/series/24838/revisions/1/mbox/
fi-bdw-gvtdvm total:278 pass:256 dwarn:8 dfail:0 fail:0 skip:14 time:433s fi-skl-gvtdvm total:278 pass:265 dwarn:0 dfail:0 fail:0 skip:13 time:439s
fi-bdw-5557u failed to collect. IGT log at Patchwork_4789/fi-bdw-5557u/igt.log fi-bsw-n3050 failed to collect. IGT log at Patchwork_4789/fi-bsw-n3050/igt.log fi-byt-n2820 failed to collect. IGT log at Patchwork_4789/fi-byt-n2820/igt.log fi-hsw-4770 failed to collect. IGT log at Patchwork_4789/fi-hsw-4770/igt.log fi-hsw-4770r failed to collect. IGT log at Patchwork_4789/fi-hsw-4770r/igt.log fi-ilk-650 failed to collect. IGT log at Patchwork_4789/fi-ilk-650/igt.log fi-ivb-3520m failed to collect. IGT log at Patchwork_4789/fi-ivb-3520m/igt.log fi-ivb-3770 failed to collect. IGT log at Patchwork_4789/fi-ivb-3770/igt.log fi-kbl-7500u failed to collect. IGT log at Patchwork_4789/fi-kbl-7500u/igt.log fi-kbl-7560u failed to collect. IGT log at Patchwork_4789/fi-kbl-7560u/igt.log fi-skl-6260u failed to collect. IGT log at Patchwork_4789/fi-skl-6260u/igt.log fi-skl-6700hq failed to collect. IGT log at Patchwork_4789/fi-skl-6700hq/igt.log fi-skl-6700k failed to collect. IGT log at Patchwork_4789/fi-skl-6700k/igt.log fi-skl-6770hq failed to collect. IGT log at Patchwork_4789/fi-skl-6770hq/igt.log fi-snb-2520m failed to collect. IGT log at Patchwork_4789/fi-snb-2520m/igt.log fi-snb-2600 failed to collect. IGT log at Patchwork_4789/fi-snb-2600/igt.log
c6d01bed4870cb979003bbbfb38b0e7ebf036794 drm-tip: 2017y-05m-23d-14h-42m-41s UTC integration manifest eb9a614 drm/i915: Implement .get_format_info() hook for CCS
f4fc298 drm: Add explict alignment for formats
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4789/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✓ Fi.CI.BAT: success for SKL render decompression support
HI,
Quoted 14 lines
-----Original Message-----
From: Intel-gfx [mailto:[email protected]] On Behalf Of Patchwork
Sent: Tuesday, May 23, 2017 10:40 PM
To: Daniel Stone <[email protected]>
Cc: [email protected]
Subject: [Intel-gfx] ✓ Fi.CI.BAT: success for SKL render decompression support== Series Details ==
Series: SKL render decompression support
URL : https://patchwork.freedesktop.org/series/24838/
State : success
Quoted 8 lines
== Summary ==
Series 24838v1 SKL render decompression support
https://patchwork.freedesktop.org/api/1.0/series/24838/revisions/1/mbox/fi-bdw-gvtdvm total:278 pass:256 dwarn:8 dfail:0 fail:0 skip:14 time:433s fi-skl-gvtdvm total:278 pass:265 dwarn:0 dfail:0 fail:0 skip:13 time:439sfi-bdw-5557u failed to collect. IGT log at Patchwork_4789/fi-bdw-5557u/igt.log
Yep, noticed, will be investigating and sending correct results when received.
Quoted 16 lines
fi-bsw-n3050 failed to collect. IGT log at Patchwork_4789/fi-bsw-n3050/igt.log fi-byt-n2820 failed to collect. IGT log at Patchwork_4789/fi-byt-n2820/igt.log fi-hsw-4770 failed to collect. IGT log at Patchwork_4789/fi-hsw-4770/igt.log fi-hsw-4770r failed to collect. IGT log at Patchwork_4789/fi-hsw-4770r/igt.log fi-ilk-650 failed to collect. IGT log at Patchwork_4789/fi-ilk-650/igt.log fi-ivb- 3520m failed to collect. IGT log at Patchwork_4789/fi-ivb-3520m/igt.log fi-ivb-3770 failed to collect. IGT log at Patchwork_4789/fi-ivb-3770/igt.log fi-kbl-7500u failed to collect. IGT log at Patchwork_4789/fi-kbl-7500u/igt.log fi-kbl-7560u failed to collect. IGT log at Patchwork_4789/fi-kbl-7560u/igt.log fi-skl-6260u failed to collect. IGT log at Patchwork_4789/fi-skl-6260u/igt.log fi-skl-6700hq failed to collect. IGT log at Patchwork_4789/fi-skl-6700hq/igt.log fi-skl-6700k failed to collect. IGT log at Patchwork_4789/fi-skl-6700k/igt.log fi-skl-6770hq failed to collect. IGT log at Patchwork_4789/fi-skl-6770hq/igt.log fi-snb-2520m failed to collect. IGT log at Patchwork_4789/fi-snb-2520m/igt.log fi-snb-2600 failed to collect. IGT log at Patchwork_4789/fi-snb-2600/igt.log
Quoted 8 lines
c6d01bed4870cb979003bbbfb38b0e7ebf036794drm-tip: 2017y-05m-23d-14h- 42m-41s UTC integration manifest
eb9a614 drm/i915: Implement .get_format_info() hook for CCS f4fc298 drm: Add explict alignment for formats== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4789/
Jani Saarinen
Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for SKL render decompression support
In reply to Daniel Stone== Series Details ==
== Series Details ==
Series: SKL render decompression support
URL : https://patchwork.freedesktop.org/series/24838/
State : success
== Summary ==
Series 24838v1 SKL render decompression support
https://patchwork.freedesktop.org/api/1.0/series/24838/revisions/1/mbox/
Test gem_exec_suspend:
Subgroup basic-s4-devices:
dmesg-warn -> PASS (fi-snb-2600) fdo#100125fdo#100125 https://bugs.freedesktop.org/show_bug.cgi?id=100125
fi-bdw-5557u total:278 pass:267 dwarn:0 dfail:0 fail:0 skip:11 time:442s fi-bdw-gvtdvm total:278 pass:256 dwarn:8 dfail:0 fail:0 skip:14 time:433s fi-bsw-n3050 total:278 pass:242 dwarn:0 dfail:0 fail:0 skip:36 time:590s fi-bxt-j4205 total:278 pass:259 dwarn:0 dfail:0 fail:0 skip:19 time:514s fi-byt-j1900 total:278 pass:254 dwarn:0 dfail:0 fail:0 skip:24 time:491s fi-byt-n2820 total:278 pass:250 dwarn:0 dfail:0 fail:0 skip:28 time:481s fi-hsw-4770 total:278 pass:262 dwarn:0 dfail:0 fail:0 skip:16 time:421s fi-hsw-4770r total:278 pass:262 dwarn:0 dfail:0 fail:0 skip:16 time:414s fi-ilk-650 total:278 pass:228 dwarn:0 dfail:0 fail:0 skip:50 time:415s fi-ivb-3520m total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 time:488s fi-ivb-3770 total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 time:468s fi-kbl-7500u total:278 pass:255 dwarn:5 dfail:0 fail:0 skip:18 time:466s fi-kbl-7560u total:278 pass:263 dwarn:5 dfail:0 fail:0 skip:10 time:568s fi-skl-6260u total:278 pass:268 dwarn:0 dfail:0 fail:0 skip:10 time:462s fi-skl-6700hq total:278 pass:239 dwarn:0 dfail:1 fail:17 skip:21 time:453s fi-skl-6700k total:278 pass:256 dwarn:4 dfail:0 fail:0 skip:18 time:466s fi-skl-6770hq total:278 pass:268 dwarn:0 dfail:0 fail:0 skip:10 time:498s fi-skl-gvtdvm total:278 pass:265 dwarn:0 dfail:0 fail:0 skip:13 time:437s fi-snb-2520m total:278 pass:250 dwarn:0 dfail:0 fail:0 skip:28 time:540s fi-snb-2600 total:278 pass:249 dwarn:0 dfail:0 fail:0 skip:29 time:416s
c8f2238b9cbfef358e61596cd49b1f648c85811e drm-tip: 2017y-05m-24d-08h-04m-41s UTC integration manifest 38823b4 drm/i915: Implement .get_format_info() hook for CCS
9d99a5b drm: Add explict alignment for formats
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4795/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx