4.4.71-stable review

This is the start of the stable review cycle for the 4.4.71 release. There are 53 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed Jun 7 15:30:23 UTC 2017. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.71-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.4.71-rc1

Eric Sandeen <[email protected]>

    xfs: only return -errno or success from attr ->put_listent

Darrick J. Wong <[email protected]>
xfs: in _attrlist_by_handle, copy the cursor back to userspace

Eric Sandeen <[email protected]>
xfs: fix unaligned access in xfs_btree_visit_blocks

Zorro Lang <[email protected]>
xfs: bad assertion for delalloc an extent that start at i_size

Brian Foster <[email protected]>
xfs: fix indlen accounting error on partial delalloc conversion

Brian Foster <[email protected]>
xfs: wait on new inodes during quotaoff dquot release

Brian Foster <[email protected]>
xfs: update ag iterator to support wait on new inodes

Brian Foster <[email protected]>
xfs: support ability to wait on new inodes

Brian Foster <[email protected]>
xfs: fix up quotacheck buffer list error handling

Brian Foster <[email protected]>
xfs: prevent multi-fsb dir readahead from reading random blocks

Eric Sandeen <[email protected]>
xfs: handle array index overrun in xfs_dir2_leaf_readbuf()

Darrick J. Wong <[email protected]>
xfs: fix over-copying of getbmap parameters from userspace

Eryu Guan <[email protected]>
xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff()

Jan Kara <[email protected]>
xfs: Fix missed holes in SEEK_HOLE implementation

Imre Deak <[email protected]>
PCI/PM: Add needs_resume flag to avoid suspend complete optimization

Yisheng Xie <[email protected]>
mlock: fix mlock count can not decrease in race condition

Punit Agrawal <[email protected]>
mm/migrate: fix refcount handling when !hugepage_migration_supported()

Patrik Jakobsson <[email protected]>
drm/gma500/psb: Actually use VBT mode when it is found

Thomas Gleixner <[email protected]>
slub/memcg: cure the brainless abuse of sysfs attributes

Alexander Tsoy <[email protected]>
ALSA: hda - apply STAC_9200_DELL_M22 quirk for Dell Latitude D430

Nicolas Iooss <[email protected]>
pcmcia: remove left-over %Z format

Lyude <[email protected]>
drm/radeon: Unbreak HPD handling for r600+

Alex Deucher <[email protected]>
drm/radeon/ci: disable mclk switching for high refresh rates (v2)

Ram Pai <[email protected]>
scsi: mpt3sas: Force request partial completion alignment

Jason Gerecke <[email protected]>
HID: wacom: Have wacom_tpc_irq guard against possible NULL dereference

Srinath Mannam <[email protected]>
mmc: sdhci-iproc: suppress spurious interrupt with Multiblock read

Sebastian Reichel <[email protected]>
i2c: i2c-tiny-usb: fix buffer not being DMA capable

Vlad Yasevich <[email protected]>
vlan: Fix tcp checksum offloads in Q-in-Q vlans

Andrew Lunn <[email protected]>
net: phy: marvell: Limit errata to 88m1101

Eric Dumazet <[email protected]>
netem: fix skb_orphan_partial()

Eric Dumazet <[email protected]>
ipv4: add reference counting to metrics

Davide Caratti <[email protected]>
sctp: fix ICMP processing if skb is non-linear

Wei Wang <[email protected]>
tcp: avoid fastopen API to be used on AF_UNSPEC

Vlad Yasevich <[email protected]>
virtio-net: enable TSO/checksum offloads for Q-in-Q vlans

Vlad Yasevich <[email protected]>
be2net: Fix offload features for Q-in-Q packets

Eric Dumazet <[email protected]>
ipv6: fix out of bound writes in __ip6_append_data()

Xin Long <[email protected]>
bridge: start hello_timer when enabling KERNEL_STP in br_stp_start

Bjørn Mork <[email protected]>
qmi_wwan: add another Lenovo EM74xx device ID

Tobias Jungel <[email protected]>
bridge: netlink: check vlan_default_pvid range

David S. Miller <[email protected]>
ipv6: Check ip6_find_1stfragopt() return value properly.

Craig Gallek <[email protected]>
ipv6: Prevent overrun when parsing v6 header options

David Ahern <[email protected]>
net: Improve handling of failures on link and route dumps

Soheil Hassas Yeganeh <[email protected]>
tcp: eliminate negative reordering in tcp_clean_rtx_queue

Eric Dumazet <[email protected]>
sctp: do not inherit ipv6_{mc|ac|fl}_list from parent

Xin Long <[email protected]>
sctp: fix src address selection if using secondary addresses for ipv6

Yuchung Cheng <[email protected]>
tcp: avoid fragmenting peculiar skbs in SACK

Ursula Braun <[email protected]>
s390/qeth: add missing hash table initializations

Julian Wiedmann <[email protected]>
s390/qeth: avoid null pointer dereference on OSN

Julian Wiedmann <[email protected]>
s390/qeth: unbreak OSM and OSN support

Ursula Braun <[email protected]>
s390/qeth: handle sysfs error during initialization

WANG Cong <[email protected]>
ipv6/dccp: do not inherit ipv6_mc_list from parent

Eric Dumazet <[email protected]>
dccp/tcp: do not inherit mc_list from parent

Orlando Arias <[email protected]>
sparc: Fix -Wstringop-overflow warning

-------------

Diffstat:

 Makefile                                    |  4 +-
 arch/sparc/include/asm/pgtable_32.h         |  4 +-
 arch/sparc/include/asm/setup.h              |  2 +-
 arch/sparc/mm/init_32.c                     |  2 +-
 drivers/char/pcmcia/cm4040_cs.c             |  6 +--
 drivers/gpu/drm/gma500/psb_intel_lvds.c     | 18 +++++---
 drivers/gpu/drm/radeon/ci_dpm.c             |  6 +++
 drivers/gpu/drm/radeon/cik.c                |  4 +-
 drivers/gpu/drm/radeon/evergreen.c          |  4 +-
 drivers/gpu/drm/radeon/r600.c               |  2 +-
 drivers/gpu/drm/radeon/si.c                 |  4 +-
 drivers/hid/wacom_wac.c                     | 45 ++++++++++----------
 drivers/i2c/busses/i2c-tiny-usb.c           | 25 +++++++++--
 drivers/mmc/host/sdhci-iproc.c              |  3 +-
 drivers/net/ethernet/emulex/benet/be_main.c |  4 +-
 drivers/net/phy/marvell.c                   | 66 ++++++++++++++++-------------
 drivers/net/usb/qmi_wwan.c                  |  2 +
 drivers/net/virtio_net.c                    |  1 +
 drivers/pci/pci.c                           |  3 +-
 drivers/s390/net/qeth_core.h                |  4 ++
 drivers/s390/net/qeth_core_main.c           | 21 +++++----
 drivers/s390/net/qeth_core_sys.c            | 24 +++++++----
 drivers/s390/net/qeth_l2.h                  |  2 +
 drivers/s390/net/qeth_l2_main.c             | 26 +++++++++---
 drivers/s390/net/qeth_l2_sys.c              |  8 ++++
 drivers/s390/net/qeth_l3_main.c             |  8 +++-
 drivers/scsi/mpt3sas/mpt3sas_scsih.c        | 15 +++++++
 fs/xfs/libxfs/xfs_bmap.c                    |  7 +--
 fs/xfs/libxfs/xfs_btree.c                   |  2 +-
 fs/xfs/xfs_attr.h                           |  1 +
 fs/xfs/xfs_attr_list.c                      |  8 ++--
 fs/xfs/xfs_bmap_util.c                      |  2 +-
 fs/xfs/xfs_buf.c                            | 24 +++++++++++
 fs/xfs/xfs_buf.h                            |  1 +
 fs/xfs/xfs_dir2_readdir.c                   | 15 +++++--
 fs/xfs/xfs_file.c                           | 31 +++++---------
 fs/xfs/xfs_icache.c                         | 58 +++++++++++++++++++++----
 fs/xfs/xfs_icache.h                         |  8 ++++
 fs/xfs/xfs_inode.h                          |  4 +-
 fs/xfs/xfs_ioctl.c                          | 11 ++++-
 fs/xfs/xfs_qm.c                             |  7 +--
 fs/xfs/xfs_qm_syscalls.c                    |  3 +-
 fs/xfs/xfs_xattr.c                          | 15 ++++---
 include/linux/if_vlan.h                     | 19 +++++----
 include/linux/pci.h                         |  5 +++
 include/net/dst.h                           |  8 +++-
 include/net/ip_fib.h                        | 10 ++---
 mm/memory-failure.c                         |  8 +---
 mm/mlock.c                                  |  5 ++-
 mm/slub.c                                   |  6 ++-
 net/bridge/br_netlink.c                     |  7 +++
 net/bridge/br_stp_if.c                      |  1 +
 net/bridge/br_stp_timer.c                   |  2 +-
 net/core/dst.c                              | 23 ++++++----
 net/core/rtnetlink.c                        | 36 ++++++++++------
 net/core/sock.c                             | 12 +++---
 net/dccp/ipv6.c                             |  6 +++
 net/ipv4/fib_frontend.c                     | 15 +++++--
 net/ipv4/fib_semantics.c                    | 17 +++++---
 net/ipv4/fib_trie.c                         | 26 ++++++------
 net/ipv4/inet_connection_sock.c             |  2 +
 net/ipv4/route.c                            | 10 ++++-
 net/ipv4/tcp.c                              |  7 ++-
 net/ipv4/tcp_input.c                        | 11 ++---
 net/ipv6/ip6_offload.c                      |  7 +--
 net/ipv6/ip6_output.c                       | 20 +++++----
 net/ipv6/output_core.c                      | 14 +++---
 net/ipv6/tcp_ipv6.c                         |  2 +
 net/ipv6/udp_offload.c                      |  6 ++-
 net/sctp/input.c                            | 16 ++++---
 net/sctp/ipv6.c                             | 49 +++++++++++++--------
 sound/pci/hda/patch_sigmatel.c              |  2 +
 72 files changed, 572 insertions(+), 290 deletions(-)

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Orlando Arias <[email protected]>

[ Upstream commit deba804c90642c8ed0f15ac1083663976d578f54 ]

Greetings,

GCC 7 introduced the -Wstringop-overflow flag to detect buffer overflows in calls to string handling functions [1][2]. Due to the way ``empty_zero_page'' is declared in arch/sparc/include/setup.h, this causes a warning to trigger at compile time in the function mem_init(), which is subsequently converted to an error. The ensuing patch fixes this issue and aligns the declaration of empty_zero_page to that of other architectures. Thank you.

Cheers,
Orlando.

[1] https://gcc.gnu.org/ml/gcc-patches/2016-10/msg02308.html
[2] https://gcc.gnu.org/gcc-7/changes.html

--------------------------------------------------------------------------------

---
 arch/sparc/include/asm/pgtable_32.h |    4 ++--
 arch/sparc/include/asm/setup.h      |    2 +-
 arch/sparc/mm/init_32.c             |    2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

@@ -91,9 +91,9 @@ extern unsigned long pfn_base;
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
  */
-extern unsigned long empty_zero_page;
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 
-#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
 
 /*
  * In general all page table modifications should use the V8 atomic

@@ -16,7 +16,7 @@ extern char reboot_command[];
  */
 extern unsigned char boot_cpu_id;
 
-extern unsigned long empty_zero_page;
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 
 extern int serial_console;
 static inline int con_is_present(void)

@@ -301,7 +301,7 @@ void __init mem_init(void)
 
 
 	/* Saves us work later. */
-	memset((void *)&empty_zero_page, 0, PAGE_SIZE);
+	memset((void *)empty_zero_page, 0, PAGE_SIZE);
 
 	i = last_valid_pfn >> ((20 - PAGE_SHIFT) + 5);
 	i += 1;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 657831ffc38e30092a2d5f03d385d710eb88b09a ]

syzkaller found a way to trigger double frees from ip_mc_drop_socket()

It turns out that leave a copy of parent mc_list at accept() time, which is very bad.

Very similar to commit 8b485ce69876 ("tcp: do not inherit fastopen_req from parent")

Initial report from Pray3r, completed by Andrey one. Thanks a lot to them !

---
 net/ipv4/inet_connection_sock.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -669,6 +669,8 @@ struct sock *inet_csk_clone_lock(const s
 		inet_sk(newsk)->inet_sport = htons(inet_rsk(req)->ir_num);
 		newsk->sk_write_space = sk_stream_write_space;
 
+		inet_sk(newsk)->mc_list = NULL;
+
 		newsk->sk_mark = inet_rsk(req)->ir_mark;
 		atomic64_set(&newsk->sk_cookie,
 			     atomic64_read(&inet_rsk(req)->ir_cookie));

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: WANG Cong <[email protected]>

[ Upstream commit 83eaddab4378db256d00d295bda6ca997cd13a52 ]

Like commit 657831ffc38e ("dccp/tcp: do not inherit mc_list from parent") we should clear ipv6_mc_list etc. for IPv6 sockets too.

---
 net/dccp/ipv6.c     |    6 ++++++
 net/ipv6/tcp_ipv6.c |    2 ++
 2 files changed, 8 insertions(+)

@@ -422,6 +422,9 @@ static struct sock *dccp_v6_request_recv
 		newsk->sk_backlog_rcv = dccp_v4_do_rcv;
 		newnp->pktoptions  = NULL;
 		newnp->opt	   = NULL;
+		newnp->ipv6_mc_list = NULL;
+		newnp->ipv6_ac_list = NULL;
+		newnp->ipv6_fl_list = NULL;
 		newnp->mcast_oif   = inet6_iif(skb);
 		newnp->mcast_hops  = ipv6_hdr(skb)->hop_limit;
 

@@ -486,6 +489,9 @@ static struct sock *dccp_v6_request_recv
 	/* Clone RX bits */
 	newnp->rxopt.all = np->rxopt.all;
 
+	newnp->ipv6_mc_list = NULL;
+	newnp->ipv6_ac_list = NULL;
+	newnp->ipv6_fl_list = NULL;
 	newnp->pktoptions = NULL;
 	newnp->opt	  = NULL;
 	newnp->mcast_oif  = inet6_iif(skb);

@@ -1033,6 +1033,7 @@ static struct sock *tcp_v6_syn_recv_sock
 		newtp->af_specific = &tcp_sock_ipv6_mapped_specific;
 #endif
 
+		newnp->ipv6_mc_list = NULL;
 		newnp->ipv6_ac_list = NULL;
 		newnp->ipv6_fl_list = NULL;
 		newnp->pktoptions  = NULL;

@@ -1102,6 +1103,7 @@ static struct sock *tcp_v6_syn_recv_sock
 	   First: no IPv4 options.
 	 */
 	newinet->inet_opt = NULL;
+	newnp->ipv6_mc_list = NULL;
 	newnp->ipv6_ac_list = NULL;
 	newnp->ipv6_fl_list = NULL;
 

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ursula Braun <[email protected]>

[ Upstream commit 9111e7880ccf419548c7b0887df020b08eadb075 ]

When setting up the device from within the layer discipline's probe routine, creating the layer-specific sysfs attributes can fail. Report this error back to the caller, and handle it by releasing the layer discipline.

---
 drivers/s390/net/qeth_core_main.c |    4 +++-
 drivers/s390/net/qeth_core_sys.c  |    2 ++
 drivers/s390/net/qeth_l2_main.c   |    5 ++++-
 drivers/s390/net/qeth_l3_main.c   |    5 ++++-
 4 files changed, 13 insertions(+), 3 deletions(-)

@@ -5650,8 +5650,10 @@ static int qeth_core_set_online(struct c
 		if (rc)
 			goto err;
 		rc = card->discipline->setup(card->gdev);
-		if (rc)
+		if (rc) {
+			qeth_core_free_discipline(card);
 			goto err;
+		}
 	}
 	rc = card->discipline->set_online(gdev);
 err:

@@ -422,6 +422,8 @@ static ssize_t qeth_dev_layer2_store(str
 		goto out;
 
 	rc = card->discipline->setup(card->gdev);
+	if (rc)
+		qeth_core_free_discipline(card);
 out:
 	mutex_unlock(&card->discipline_mutex);
 	return rc ? rc : count;

@@ -1030,8 +1030,11 @@ static int qeth_l2_stop(struct net_devic
 static int qeth_l2_probe_device(struct ccwgroup_device *gdev)
 {
 	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	int rc;
 
-	qeth_l2_create_device_attributes(&gdev->dev);
+	rc = qeth_l2_create_device_attributes(&gdev->dev);
+	if (rc)
+		return rc;
 	INIT_LIST_HEAD(&card->vid_list);
 	hash_init(card->mac_htable);
 	card->options.layer2 = 1;

@@ -3227,8 +3227,11 @@ static int qeth_l3_setup_netdev(struct q
 static int qeth_l3_probe_device(struct ccwgroup_device *gdev)
 {
 	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	int rc;
 
-	qeth_l3_create_device_attributes(&gdev->dev);
+	rc = qeth_l3_create_device_attributes(&gdev->dev);
+	if (rc)
+		return rc;
 	card->options.layer2 = 0;
 	card->info.hwtrap = 0;
 	return 0;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <[email protected]>

[ Upstream commit 2d2ebb3ed0c6acfb014f98e427298673a5d07b82 ]

commit b4d72c08b358 ("qeth: bridgeport support - basic control") broke the support for OSM and OSN devices as follows:

As OSM and OSN are L2 only, qeth_core_probe_device() does an early setup by loading the l2 discipline and calling qeth_l2_probe_device(). In this context, adding the l2-specific bridgeport sysfs attributes via qeth_l2_create_device_attributes() hits a BUG_ON in fs/sysfs/group.c, since the basic sysfs infrastructure for the device hasn't been established yet.

Note that OSN actually has its own unique sysfs attributes (qeth_osn_devtype), so the additional attributes shouldn't be created at all.
For OSM, add a new qeth_l2_devtype that contains all the common and l2-specific sysfs attributes.
When qeth_core_probe_device() does early setup for OSM or OSN, assign the corresponding devtype so that the ccwgroup probe code creates the full set of sysfs attributes.
This allows us to skip qeth_l2_create_device_attributes() in case of an early setup.

Any device that can't do early setup will initially have only the generic sysfs attributes, and when it's probed later qeth_l2_probe_device() adds the l2-specific attributes.

If an early-setup device is removed (by calling ccwgroup_ungroup()), device_unregister() will - using the devtype - delete the l2-specific attributes before qeth_l2_remove_device() is called. So make sure to not remove them twice.

What complicates the issue is that qeth_l2_probe_device() and qeth_l2_remove_device() is also called on a device when its layer2 attribute changes (ie. its layer mode is switched). For early-setup devices this wouldn't work properly - we wouldn't remove the l2-specific attributes when switching to L3. But switching the layer mode doesn't actually make any sense; we already decided that the device can only operate in L2! So just refuse to switch the layer mode on such devices. Note that OSN doesn't have a layer2 attribute, so we only need to special-case OSM.

Based on an initial patch by Ursula Braun.

---
 drivers/s390/net/qeth_core.h      |    4 ++++
 drivers/s390/net/qeth_core_main.c |   17 +++++++++--------
 drivers/s390/net/qeth_core_sys.c  |   22 ++++++++++++++--------
 drivers/s390/net/qeth_l2.h        |    2 ++
 drivers/s390/net/qeth_l2_main.c   |   17 +++++++++++++----
 drivers/s390/net/qeth_l2_sys.c    |    8 ++++++++
 drivers/s390/net/qeth_l3_main.c   |    1 +
 7 files changed, 51 insertions(+), 20 deletions(-)

@@ -717,6 +717,7 @@ enum qeth_discipline_id {
 };
 
 struct qeth_discipline {
+	const struct device_type *devtype;
 	void (*start_poll)(struct ccw_device *, int, unsigned long);
 	qdio_handler_t *input_handler;
 	qdio_handler_t *output_handler;

@@ -881,6 +882,9 @@ extern struct qeth_discipline qeth_l2_di
 extern struct qeth_discipline qeth_l3_discipline;
 extern const struct attribute_group *qeth_generic_attr_groups[];
 extern const struct attribute_group *qeth_osn_attr_groups[];
+extern const struct attribute_group qeth_device_attr_group;
+extern const struct attribute_group qeth_device_blkt_group;
+extern const struct device_type qeth_generic_devtype;
 extern struct workqueue_struct *qeth_wq;
 
 int qeth_card_hw_is_reachable(struct qeth_card *);

@@ -5449,10 +5449,12 @@ void qeth_core_free_discipline(struct qe
 	card->discipline = NULL;
 }
 
-static const struct device_type qeth_generic_devtype = {
+const struct device_type qeth_generic_devtype = {
 	.name = "qeth_generic",
 	.groups = qeth_generic_attr_groups,
 };
+EXPORT_SYMBOL_GPL(qeth_generic_devtype);
+
 static const struct device_type qeth_osn_devtype = {
 	.name = "qeth_osn",
 	.groups = qeth_osn_attr_groups,

@@ -5578,23 +5580,22 @@ static int qeth_core_probe_device(struct
 		goto err_card;
 	}
 
-	if (card->info.type == QETH_CARD_TYPE_OSN)
-		gdev->dev.type = &qeth_osn_devtype;
-	else
-		gdev->dev.type = &qeth_generic_devtype;
-
 	switch (card->info.type) {
 	case QETH_CARD_TYPE_OSN:
 	case QETH_CARD_TYPE_OSM:
 		rc = qeth_core_load_discipline(card, QETH_DISCIPLINE_LAYER2);
 		if (rc)
 			goto err_card;
+
+		gdev->dev.type = (card->info.type != QETH_CARD_TYPE_OSN)
+					? card->discipline->devtype
+					: &qeth_osn_devtype;
 		rc = card->discipline->setup(card->gdev);
 		if (rc)
 			goto err_disc;
-	case QETH_CARD_TYPE_OSD:
-	case QETH_CARD_TYPE_OSX:
+		break;
 	default:
+		gdev->dev.type = &qeth_generic_devtype;
 		break;
 	}
 

@@ -409,12 +409,16 @@ static ssize_t qeth_dev_layer2_store(str
 
 	if (card->options.layer2 == newdis)
 		goto out;
-	else {
-		card->info.mac_bits  = 0;
-		if (card->discipline) {
-			card->discipline->remove(card->gdev);
-			qeth_core_free_discipline(card);
-		}
+	if (card->info.type == QETH_CARD_TYPE_OSM) {
+		/* fixed layer, can't switch */
+		rc = -EOPNOTSUPP;
+		goto out;
+	}
+
+	card->info.mac_bits = 0;
+	if (card->discipline) {
+		card->discipline->remove(card->gdev);
+		qeth_core_free_discipline(card);
 	}
 
 	rc = qeth_core_load_discipline(card, newdis);

@@ -701,10 +705,11 @@ static struct attribute *qeth_blkt_devic
 	&dev_attr_inter_jumbo.attr,
 	NULL,
 };
-static struct attribute_group qeth_device_blkt_group = {
+const struct attribute_group qeth_device_blkt_group = {
 	.name = "blkt",
 	.attrs = qeth_blkt_device_attrs,
 };
+EXPORT_SYMBOL_GPL(qeth_device_blkt_group);
 
 static struct attribute *qeth_device_attrs[] = {
 	&dev_attr_state.attr,

@@ -724,9 +729,10 @@ static struct attribute *qeth_device_att
 	&dev_attr_switch_attrs.attr,
 	NULL,
 };
-static struct attribute_group qeth_device_attr_group = {
+const struct attribute_group qeth_device_attr_group = {
 	.attrs = qeth_device_attrs,
 };
+EXPORT_SYMBOL_GPL(qeth_device_attr_group);
 
 const struct attribute_group *qeth_generic_attr_groups[] = {
 	&qeth_device_attr_group,

@@ -8,6 +8,8 @@
 
 #include "qeth_core.h"
 
+extern const struct attribute_group *qeth_l2_attr_groups[];
+
 int qeth_l2_create_device_attributes(struct device *);
 void qeth_l2_remove_device_attributes(struct device *);
 void qeth_l2_setup_bridgeport_attrs(struct qeth_card *card);

@@ -1027,14 +1027,21 @@ static int qeth_l2_stop(struct net_devic
 	return 0;
 }
 
+static const struct device_type qeth_l2_devtype = {
+	.name = "qeth_layer2",
+	.groups = qeth_l2_attr_groups,
+};
+
 static int qeth_l2_probe_device(struct ccwgroup_device *gdev)
 {
 	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
 	int rc;
 
-	rc = qeth_l2_create_device_attributes(&gdev->dev);
-	if (rc)
-		return rc;
+	if (gdev->dev.type == &qeth_generic_devtype) {
+		rc = qeth_l2_create_device_attributes(&gdev->dev);
+		if (rc)
+			return rc;
+	}
 	INIT_LIST_HEAD(&card->vid_list);
 	hash_init(card->mac_htable);
 	card->options.layer2 = 1;

@@ -1046,7 +1053,8 @@ static void qeth_l2_remove_device(struct
 {
 	struct qeth_card *card = dev_get_drvdata(&cgdev->dev);
 
-	qeth_l2_remove_device_attributes(&cgdev->dev);
+	if (cgdev->dev.type == &qeth_generic_devtype)
+		qeth_l2_remove_device_attributes(&cgdev->dev);
 	qeth_set_allowed_threads(card, 0, 1);
 	wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0);
 

@@ -1432,6 +1440,7 @@ static int qeth_l2_control_event(struct
 }
 
 struct qeth_discipline qeth_l2_discipline = {
+	.devtype = &qeth_l2_devtype,
 	.start_poll = qeth_qdio_start_poll,
 	.input_handler = (qdio_handler_t *) qeth_qdio_input_handler,
 	.output_handler = (qdio_handler_t *) qeth_qdio_output_handler,

@@ -272,3 +272,11 @@ void qeth_l2_setup_bridgeport_attrs(stru
 	} else
 		qeth_bridgeport_an_set(card, 0);
 }
+
+const struct attribute_group *qeth_l2_attr_groups[] = {
+	&qeth_device_attr_group,
+	&qeth_device_blkt_group,
+	/* l2 specific, see l2_{create,remove}_device_attributes(): */
+	&qeth_l2_bridgeport_attr_group,
+	NULL,
+};

@@ -3522,6 +3522,7 @@ static int qeth_l3_control_event(struct
 }
 
 struct qeth_discipline qeth_l3_discipline = {
+	.devtype = &qeth_generic_devtype,
 	.start_poll = qeth_qdio_start_poll,
 	.input_handler = (qdio_handler_t *) qeth_qdio_input_handler,
 	.output_handler = (qdio_handler_t *) qeth_qdio_output_handler,

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <[email protected]>

[ Upstream commit 25e2c341e7818a394da9abc403716278ee646014 ]

Access card->dev only after checking whether's its valid.

---
 drivers/s390/net/qeth_l2_main.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

@@ -1112,7 +1112,6 @@ static int qeth_l2_setup_netdev(struct q
 	case QETH_CARD_TYPE_OSN:
 		card->dev = alloc_netdev(0, "osn%d", NET_NAME_UNKNOWN,
 					 ether_setup);
-		card->dev->flags |= IFF_NOARP;
 		break;
 	default:
 		card->dev = alloc_etherdev(0);

@@ -1125,9 +1124,12 @@ static int qeth_l2_setup_netdev(struct q
 	card->dev->watchdog_timeo = QETH_TX_TIMEOUT;
 	card->dev->mtu = card->info.initial_mtu;
 	card->dev->netdev_ops = &qeth_l2_netdev_ops;
-	card->dev->ethtool_ops =
-		(card->info.type != QETH_CARD_TYPE_OSN) ?
-		&qeth_l2_ethtool_ops : &qeth_l2_osn_ops;
+	if (card->info.type == QETH_CARD_TYPE_OSN) {
+		card->dev->ethtool_ops = &qeth_l2_osn_ops;
+		card->dev->flags |= IFF_NOARP;
+	} else {
+		card->dev->ethtool_ops = &qeth_l2_ethtool_ops;
+	}
 	card->dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
 	if (card->info.type == QETH_CARD_TYPE_OSD && !card->info.guestlan) {
 		card->dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ursula Braun <[email protected]>

[ Upstream commit ebccc7397e4a49ff64c8f44a54895de9d32fe742 ]

commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") added new hash tables, but missed to initialize them.

---
 drivers/s390/net/qeth_l3_main.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -3232,6 +3232,8 @@ static int qeth_l3_probe_device(struct c
 	rc = qeth_l3_create_device_attributes(&gdev->dev);
 	if (rc)
 		return rc;
+	hash_init(card->ip_htable);
+	hash_init(card->ip_mc_htable);
 	card->options.layer2 = 0;
 	card->info.hwtrap = 0;
 	return 0;

Hi Greg,

please drop this patch from the 4.4-stable queue, the commit that it fixes didn't exist in 4.4.

git describe --contains 5f78e29ceebf
v4.8-rc1~140^2~312^2~5

That also resolves the kbuild bot report for this patch.

Yeah, my fault, sorry about this, now dropped.

greg k-h

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yuchung Cheng <[email protected]>

[ Upstream commit b451e5d24ba6687c6f0e7319c727a709a1846c06 ]

This patch fixes a bug in splitting an SKB during SACK processing. Specifically if an skb contains multiple packets and is only partially sacked in the higher sequences, tcp_match_sack_to_skb() splits the skb and marks the second fragment as SACKed.

The current code further attempts rounding up the first fragment to MSS boundaries. But it misses a boundary condition when the rounded-up fragment size (pkt_len) is exactly skb size. Spliting such an skb is pointless and causses a kernel warning and aborts the SACK processing. This patch universally checks such over-split before calling tcp_fragment to prevent these unnecessary warnings.

---
 net/ipv4/tcp_input.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

@@ -1134,13 +1134,14 @@ static int tcp_match_skb_to_sack(struct
 		 */
 		if (pkt_len > mss) {
 			unsigned int new_len = (pkt_len / mss) * mss;
-			if (!in_sack && new_len < pkt_len) {
+			if (!in_sack && new_len < pkt_len)
 				new_len += mss;
-				if (new_len >= skb->len)
-					return 0;
-			}
 			pkt_len = new_len;
 		}
+
+		if (pkt_len >= skb->len && !in_sack)
+			return 0;
+
 		err = tcp_fragment(sk, skb, pkt_len, mss, GFP_ATOMIC);
 		if (err < 0)
 			return err;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit dbc2b5e9a09e9a6664679a667ff81cff6e5f2641 ]

Commit 0ca50d12fe46 ("sctp: fix src address selection if using secondary addresses") has fixed a src address selection issue when using secondary addresses for ipv4.

Now sctp ipv6 also has the similar issue. When using a secondary address, sctp_v6_get_dst tries to choose the saddr which has the most same bits with the daddr by sctp_v6_addr_match_len. It may make some cases not work as expected.

hostA:
[1] fd21:356b:459a:cf10::11 (eth1)
[2] fd21:356b:459a:cf20::11 (eth2)

hostB:
[a] fd21:356b:459a:cf30::2 (eth1)
[b] fd21:356b:459a:cf40::2 (eth2)

route from hostA to hostB:
fd21:356b:459a:cf30::/64 dev eth1 metric 1024 mtu 1500

The expected path should be:
fd21:356b:459a:cf10::11 <-> fd21:356b:459a:cf30::2
But addr[2] matches addr[a] more bits than addr[1] does, according to sctp_v6_addr_match_len. It causes the path to be:
fd21:356b:459a:cf20::11 <-> fd21:356b:459a:cf30::2

This patch is to fix it with the same way as Marcelo's fix for sctp ipv4. As no ip_dev_find for ipv6, this patch is to use ipv6_chk_addr to check if the saddr is in a dev instead.

Note that for backwards compatibility, it will still do the addr_match_len check here when no optimal is found.

---
 net/sctp/ipv6.c |   46 +++++++++++++++++++++++++++++-----------------
 1 file changed, 29 insertions(+), 17 deletions(-)

@@ -239,12 +239,10 @@ static void sctp_v6_get_dst(struct sctp_
 	struct sctp_bind_addr *bp;
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct sctp_sockaddr_entry *laddr;
-	union sctp_addr *baddr = NULL;
 	union sctp_addr *daddr = &t->ipaddr;
 	union sctp_addr dst_saddr;
 	struct in6_addr *final_p, final;
 	__u8 matchlen = 0;
-	__u8 bmatchlen;
 	sctp_scope_t scope;
 
 	memset(fl6, 0, sizeof(struct flowi6));

@@ -311,23 +309,37 @@ static void sctp_v6_get_dst(struct sctp_
 	 */
 	rcu_read_lock();
 	list_for_each_entry_rcu(laddr, &bp->address_list, list) {
-		if (!laddr->valid)
+		struct dst_entry *bdst;
+		__u8 bmatchlen;
+
+		if (!laddr->valid ||
+		    laddr->state != SCTP_ADDR_SRC ||
+		    laddr->a.sa.sa_family != AF_INET6 ||
+		    scope > sctp_scope(&laddr->a))
 			continue;
-		if ((laddr->state == SCTP_ADDR_SRC) &&
-		    (laddr->a.sa.sa_family == AF_INET6) &&
-		    (scope <= sctp_scope(&laddr->a))) {
-			bmatchlen = sctp_v6_addr_match_len(daddr, &laddr->a);
-			if (!baddr || (matchlen < bmatchlen)) {
-				baddr = &laddr->a;
-				matchlen = bmatchlen;
-			}
-		}
-	}
-	if (baddr) {
-		fl6->saddr = baddr->v6.sin6_addr;
-		fl6->fl6_sport = baddr->v6.sin6_port;
+
+		fl6->saddr = laddr->a.v6.sin6_addr;
+		fl6->fl6_sport = laddr->a.v6.sin6_port;
 		final_p = fl6_update_dst(fl6, rcu_dereference(np->opt), &final);
-		dst = ip6_dst_lookup_flow(sk, fl6, final_p);
+		bdst = ip6_dst_lookup_flow(sk, fl6, final_p);
+
+		if (!IS_ERR(bdst) &&
+		    ipv6_chk_addr(dev_net(bdst->dev),
+				  &laddr->a.v6.sin6_addr, bdst->dev, 1)) {
+			if (!IS_ERR_OR_NULL(dst))
+				dst_release(dst);
+			dst = bdst;
+			break;
+		}
+
+		bmatchlen = sctp_v6_addr_match_len(daddr, &laddr->a);
+		if (matchlen > bmatchlen)
+			continue;
+
+		if (!IS_ERR_OR_NULL(dst))
+			dst_release(dst);
+		dst = bdst;
+		matchlen = bmatchlen;
 	}
 	rcu_read_unlock();
 

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit fdcee2cbb8438702ea1b328fb6e0ac5e9a40c7f8 ]

SCTP needs fixes similar to 83eaddab4378 ("ipv6/dccp: do not inherit ipv6_mc_list from parent"), otherwise bad things can happen.

---
 net/sctp/ipv6.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -674,6 +674,9 @@ static struct sock *sctp_v6_create_accep
 	newnp = inet6_sk(newsk);
 
 	memcpy(newnp, np, sizeof(struct ipv6_pinfo));
+	newnp->ipv6_mc_list = NULL;
+	newnp->ipv6_ac_list = NULL;
+	newnp->ipv6_fl_list = NULL;
 
 	rcu_read_lock();
 	opt = rcu_dereference(np->opt);

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Soheil Hassas Yeganeh <[email protected]>

[ Upstream commit bafbb9c73241760023d8981191ddd30bb1c6dbac ]

tcp_ack() can call tcp_fragment() which may dededuct the value tp->fackets_out when MSS changes. When prior_fackets is larger than tp->fackets_out, tcp_clean_rtx_queue() can invoke tcp_update_reordering() with negative values. This results in absurd tp->reodering values higher than sysctl_tcp_max_reordering.

Note that tcp_update_reordering indeeds sets tp->reordering to min(sysctl_tcp_max_reordering, metric), but because the comparison is signed, a negative metric always wins.

---
 net/ipv4/tcp_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -3220,7 +3220,7 @@ static int tcp_clean_rtx_queue(struct so
 			int delta;
 
 			/* Non-retransmitted hole got filled? That's reordering */
-			if (reord < prior_fackets)
+			if (reord < prior_fackets && reord <= tp->fackets_out)
 				tcp_update_reordering(sk, tp->fackets_out - reord, 0);
 
 			delta = tcp_is_fack(tp) ? pkts_acked :

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Ahern <[email protected]>

[ Upstream commit f6c5775ff0bfa62b072face6bf1d40f659f194b2 ]

In general, rtnetlink dumps do not anticipate failure to dump a single object (e.g., link or route) on a single pass. As both route and link objects have grown via more attributes, that is no longer a given.

netlink dumps can handle a failure if the dump function returns an error; specifically, netlink_dump adds the return code to the response if it is <= 0 so userspace is notified of the failure. The missing piece is the rtnetlink dump functions returning the error.

Fix route and link dump functions to return the errors if no object is added to an skb (detected by skb->len != 0). IPv6 route dumps (rt6_dump_route) already return the error; this patch updates IPv4 and link dumps. Other dump functions may need to be ajusted as well.

---
 net/core/rtnetlink.c    |   36 ++++++++++++++++++++++++------------
 net/ipv4/fib_frontend.c |   15 +++++++++++----
 net/ipv4/fib_trie.c     |   26 ++++++++++++++------------
 3 files changed, 49 insertions(+), 28 deletions(-)

@@ -1458,13 +1458,13 @@ static int rtnl_dump_ifinfo(struct sk_bu
 					       cb->nlh->nlmsg_seq, 0,
 					       NLM_F_MULTI,
 					       ext_filter_mask);
-			/* If we ran out of room on the first message,
-			 * we're in trouble
-			 */
-			WARN_ON((err == -EMSGSIZE) && (skb->len == 0));
 
-			if (err < 0)
-				goto out;
+			if (err < 0) {
+				if (likely(skb->len))
+					goto out;
+
+				goto out_err;
+			}
 
 			nl_dump_check_consistent(cb, nlmsg_hdr(skb));
 cont:

@@ -1472,10 +1472,12 @@ cont:
 		}
 	}
 out:
+	err = skb->len;
+out_err:
 	cb->args[1] = idx;
 	cb->args[0] = h;
 
-	return skb->len;
+	return err;
 }
 
 int rtnl_nla_parse_ifla(struct nlattr **tb, const struct nlattr *head, int len)

@@ -3127,8 +3129,12 @@ static int rtnl_bridge_getlink(struct sk
 				err = br_dev->netdev_ops->ndo_bridge_getlink(
 						skb, portid, seq, dev,
 						filter_mask, NLM_F_MULTI);
-				if (err < 0 && err != -EOPNOTSUPP)
-					break;
+				if (err < 0 && err != -EOPNOTSUPP) {
+					if (likely(skb->len))
+						break;
+
+					goto out_err;
+				}
 			}
 			idx++;
 		}

@@ -3139,16 +3145,22 @@ static int rtnl_bridge_getlink(struct sk
 							      seq, dev,
 							      filter_mask,
 							      NLM_F_MULTI);
-				if (err < 0 && err != -EOPNOTSUPP)
-					break;
+				if (err < 0 && err != -EOPNOTSUPP) {
+					if (likely(skb->len))
+						break;
+
+					goto out_err;
+				}
 			}
 			idx++;
 		}
 	}
+	err = skb->len;
+out_err:
 	rcu_read_unlock();
 	cb->args[0] = idx;
 
-	return skb->len;
+	return err;
 }
 
 static inline size_t bridge_nlmsg_size(void)

@@ -757,7 +757,7 @@ static int inet_dump_fib(struct sk_buff
 	unsigned int e = 0, s_e;
 	struct fib_table *tb;
 	struct hlist_head *head;
-	int dumped = 0;
+	int dumped = 0, err;
 
 	if (nlmsg_len(cb->nlh) >= sizeof(struct rtmsg) &&
 	    ((struct rtmsg *) nlmsg_data(cb->nlh))->rtm_flags & RTM_F_CLONED)

@@ -777,20 +777,27 @@ static int inet_dump_fib(struct sk_buff
 			if (dumped)
 				memset(&cb->args[2], 0, sizeof(cb->args) -
 						 2 * sizeof(cb->args[0]));
-			if (fib_table_dump(tb, skb, cb) < 0)
-				goto out;
+			err = fib_table_dump(tb, skb, cb);
+			if (err < 0) {
+				if (likely(skb->len))
+					goto out;
+
+				goto out_err;
+			}
 			dumped = 1;
 next:
 			e++;
 		}
 	}
 out:
+	err = skb->len;
+out_err:
 	rcu_read_unlock();
 
 	cb->args[1] = e;
 	cb->args[0] = h;
 
-	return skb->len;
+	return err;
 }
 
 /* Prepare and feed intra-kernel routing request.

@@ -1906,6 +1906,8 @@ static int fn_trie_dump_leaf(struct key_
 
 	/* rcu_read_lock is hold by caller */
 	hlist_for_each_entry_rcu(fa, &l->leaf, fa_list) {
+		int err;
+
 		if (i < s_i) {
 			i++;
 			continue;

@@ -1916,17 +1918,14 @@ static int fn_trie_dump_leaf(struct key_
 			continue;
 		}
 
-		if (fib_dump_info(skb, NETLINK_CB(cb->skb).portid,
-				  cb->nlh->nlmsg_seq,
-				  RTM_NEWROUTE,
-				  tb->tb_id,
-				  fa->fa_type,
-				  xkey,
-				  KEYLENGTH - fa->fa_slen,
-				  fa->fa_tos,
-				  fa->fa_info, NLM_F_MULTI) < 0) {
+		err = fib_dump_info(skb, NETLINK_CB(cb->skb).portid,
+				    cb->nlh->nlmsg_seq, RTM_NEWROUTE,
+				    tb->tb_id, fa->fa_type,
+				    xkey, KEYLENGTH - fa->fa_slen,
+				    fa->fa_tos, fa->fa_info, NLM_F_MULTI);
+		if (err < 0) {
 			cb->args[4] = i;
-			return -1;
+			return err;
 		}
 		i++;
 	}

@@ -1948,10 +1947,13 @@ int fib_table_dump(struct fib_table *tb,
 	t_key key = cb->args[3];
 
 	while ((l = leaf_walk_rcu(&tp, key)) != NULL) {
-		if (fn_trie_dump_leaf(l, tb, skb, cb) < 0) {
+		int err;
+
+		err = fn_trie_dump_leaf(l, tb, skb, cb);
+		if (err < 0) {
 			cb->args[3] = key;
 			cb->args[2] = count;
-			return -1;
+			return err;
 		}
 
 		++count;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Craig Gallek <[email protected]>

[ Upstream commit 2423496af35d94a87156b063ea5cedffc10a70a1 ]

The KASAN warning repoted below was discovered with a syzkaller program. The reproducer is basically:
int s = socket(AF_INET6, SOCK_RAW, NEXTHDR_HOP); send(s, &one_byte_of_data, 1, MSG_MORE);
send(s, &more_than_mtu_bytes_data, 2000, 0);

The socket() call sets the nexthdr field of the v6 header to NEXTHDR_HOP, the first send call primes the payload with a non zero byte of data, and the second send call triggers the fragmentation path.

The fragmentation code tries to parse the header options in order to figure out where to insert the fragment option. Since nexthdr points to an invalid option, the calculation of the size of the network header can made to be much larger than the linear section of the skb and data is read outside of it.

This fix makes ip6_find_1stfrag return an error if it detects running out-of-bounds.

[   42.361487] ==================================================================
[   42.364412] BUG: KASAN: slab-out-of-bounds in ip6_fragment+0x11c8/0x3730
[   42.365471] Read of size 840 at addr ffff88000969e798 by task ip6_fragment-oo/3789
[   42.366469]
[   42.366696] CPU: 1 PID: 3789 Comm: ip6_fragment-oo Not tainted 4.11.0+ #41
[   42.367628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1ubuntu1 04/01/2014
[   42.368824] Call Trace:
[   42.369183]  dump_stack+0xb3/0x10b
[   42.369664]  print_address_description+0x73/0x290
[   42.370325]  kasan_report+0x252/0x370
[   42.370839]  ? ip6_fragment+0x11c8/0x3730
[   42.371396]  check_memory_region+0x13c/0x1a0
[   42.371978]  memcpy+0x23/0x50
[   42.372395]  ip6_fragment+0x11c8/0x3730
[   42.372920]  ? nf_ct_expect_unregister_notifier+0x110/0x110
[   42.373681]  ? ip6_copy_metadata+0x7f0/0x7f0
[   42.374263]  ? ip6_forward+0x2e30/0x2e30
[   42.374803]  ip6_finish_output+0x584/0x990
[   42.375350]  ip6_output+0x1b7/0x690
[   42.375836]  ? ip6_finish_output+0x990/0x990
[   42.376411]  ? ip6_fragment+0x3730/0x3730
[   42.376968]  ip6_local_out+0x95/0x160
[   42.377471]  ip6_send_skb+0xa1/0x330
[   42.377969]  ip6_push_pending_frames+0xb3/0xe0
[   42.378589]  rawv6_sendmsg+0x2051/0x2db0
[   42.379129]  ? rawv6_bind+0x8b0/0x8b0
[   42.379633]  ? _copy_from_user+0x84/0xe0
[   42.380193]  ? debug_check_no_locks_freed+0x290/0x290
[   42.380878]  ? ___sys_sendmsg+0x162/0x930
[   42.381427]  ? rcu_read_lock_sched_held+0xa3/0x120
[   42.382074]  ? sock_has_perm+0x1f6/0x290
[   42.382614]  ? ___sys_sendmsg+0x167/0x930
[   42.383173]  ? lock_downgrade+0x660/0x660
[   42.383727]  inet_sendmsg+0x123/0x500
[   42.384226]  ? inet_sendmsg+0x123/0x500
[   42.384748]  ? inet_recvmsg+0x540/0x540
[   42.385263]  sock_sendmsg+0xca/0x110
[   42.385758]  SYSC_sendto+0x217/0x380
[   42.386249]  ? SYSC_connect+0x310/0x310
[   42.386783]  ? __might_fault+0x110/0x1d0
[   42.387324]  ? lock_downgrade+0x660/0x660
[   42.387880]  ? __fget_light+0xa1/0x1f0
[   42.388403]  ? __fdget+0x18/0x20
[   42.388851]  ? sock_common_setsockopt+0x95/0xd0
[   42.389472]  ? SyS_setsockopt+0x17f/0x260
[   42.390021]  ? entry_SYSCALL_64_fastpath+0x5/0xbe
[   42.390650]  SyS_sendto+0x40/0x50
[   42.391103]  entry_SYSCALL_64_fastpath+0x1f/0xbe
[   42.391731] RIP: 0033:0x7fbbb711e383
[   42.392217] RSP: 002b:00007ffff4d34f28 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[   42.393235] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fbbb711e383
[   42.394195] RDX: 0000000000001000 RSI: 00007ffff4d34f60 RDI: 0000000000000003
[   42.395145] RBP: 0000000000000046 R08: 00007ffff4d34f40 R09: 0000000000000018
[   42.396056] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000400aad
[   42.396598] R13: 0000000000000066 R14: 00007ffff4d34ee0 R15: 00007fbbb717af00
[   42.397257]
[   42.397411] Allocated by task 3789:
[   42.397702]  save_stack_trace+0x16/0x20
[   42.398005]  save_stack+0x46/0xd0
[   42.398267]  kasan_kmalloc+0xad/0xe0
[   42.398548]  kasan_slab_alloc+0x12/0x20
[   42.398848]  __kmalloc_node_track_caller+0xcb/0x380
[   42.399224]  __kmalloc_reserve.isra.32+0x41/0xe0
[   42.399654]  __alloc_skb+0xf8/0x580
[   42.400003]  sock_wmalloc+0xab/0xf0
[   42.400346]  __ip6_append_data.isra.41+0x2472/0x33d0
[   42.400813]  ip6_append_data+0x1a8/0x2f0
[   42.401122]  rawv6_sendmsg+0x11ee/0x2db0
[   42.401505]  inet_sendmsg+0x123/0x500
[   42.401860]  sock_sendmsg+0xca/0x110
[   42.402209]  ___sys_sendmsg+0x7cb/0x930
[   42.402582]  __sys_sendmsg+0xd9/0x190
[   42.402941]  SyS_sendmsg+0x2d/0x50
[   42.403273]  entry_SYSCALL_64_fastpath+0x1f/0xbe
[   42.403718]
[   42.403871] Freed by task 1794:
[   42.404146]  save_stack_trace+0x16/0x20
[   42.404515]  save_stack+0x46/0xd0
[   42.404827]  kasan_slab_free+0x72/0xc0
[   42.405167]  kfree+0xe8/0x2b0
[   42.405462]  skb_free_head+0x74/0xb0
[   42.405806]  skb_release_data+0x30e/0x3a0
[   42.406198]  skb_release_all+0x4a/0x60
[   42.406563]  consume_skb+0x113/0x2e0
[   42.406910]  skb_free_datagram+0x1a/0xe0
[   42.407288]  netlink_recvmsg+0x60d/0xe40
[   42.407667]  sock_recvmsg+0xd7/0x110
[   42.408022]  ___sys_recvmsg+0x25c/0x580
[   42.408395]  __sys_recvmsg+0xd6/0x190
[   42.408753]  SyS_recvmsg+0x2d/0x50
[   42.409086]  entry_SYSCALL_64_fastpath+0x1f/0xbe
[   42.409513]
[   42.409665] The buggy address belongs to the object at ffff88000969e780
[   42.409665]  which belongs to the cache kmalloc-512 of size 512
[   42.410846] The buggy address is located 24 bytes inside of
[   42.410846]  512-byte region [ffff88000969e780, ffff88000969e980)
[   42.411941] The buggy address belongs to the page:
[   42.412405] page:ffffea000025a780 count:1 mapcount:0 mapping:          (null) index:0x0 compound_mapcount: 0
[   42.413298] flags: 0x100000000008100(slab|head)
[   42.413729] raw: 0100000000008100 0000000000000000 0000000000000000 00000001800c000c
[   42.414387] raw: ffffea00002a9500 0000000900000007 ffff88000c401280 0000000000000000
[   42.415074] page dumped because: kasan: bad access detected
[   42.415604]
[   42.415757] Memory state around the buggy address:
[   42.416222]  ffff88000969e880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   42.416904]  ffff88000969e900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   42.417591] >ffff88000969e980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   42.418273]                    ^
[   42.418588]  ffff88000969ea00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   42.419273]  ffff88000969ea80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   42.419882] ==================================================================

---
 net/ipv6/ip6_offload.c |    2 ++
 net/ipv6/ip6_output.c  |    4 ++++
 net/ipv6/output_core.c |   14 ++++++++------
 net/ipv6/udp_offload.c |    2 ++
 4 files changed, 16 insertions(+), 6 deletions(-)

@@ -122,6 +122,8 @@ static struct sk_buff *ipv6_gso_segment(
 
 		if (udpfrag) {
 			unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
+			if (unfrag_ip6hlen < 0)
+				return ERR_PTR(unfrag_ip6hlen);
 			fptr = (struct frag_hdr *)((u8 *)ipv6h + unfrag_ip6hlen);
 			fptr->frag_off = htons(offset);
 			if (skb->next)

@@ -572,6 +572,10 @@ int ip6_fragment(struct net *net, struct
 	u8 *prevhdr, nexthdr = 0;
 
 	hlen = ip6_find_1stfragopt(skb, &prevhdr);
+	if (hlen < 0) {
+		err = hlen;
+		goto fail;
+	}
 	nexthdr = *prevhdr;
 
 	mtu = ip6_skb_dst_mtu(skb);

@@ -79,14 +79,13 @@ EXPORT_SYMBOL(ipv6_select_ident);
 int ip6_find_1stfragopt(struct sk_buff *skb, u8 **nexthdr)
 {
 	u16 offset = sizeof(struct ipv6hdr);
-	struct ipv6_opt_hdr *exthdr =
-				(struct ipv6_opt_hdr *)(ipv6_hdr(skb) + 1);
 	unsigned int packet_len = skb_tail_pointer(skb) -
 		skb_network_header(skb);
 	int found_rhdr = 0;
 	*nexthdr = &ipv6_hdr(skb)->nexthdr;
 
-	while (offset + 1 <= packet_len) {
+	while (offset <= packet_len) {
+		struct ipv6_opt_hdr *exthdr;
 
 		switch (**nexthdr) {
 

@@ -107,13 +106,16 @@ int ip6_find_1stfragopt(struct sk_buff *
 			return offset;
 		}
 
-		offset += ipv6_optlen(exthdr);
-		*nexthdr = &exthdr->nexthdr;
+		if (offset + sizeof(struct ipv6_opt_hdr) > packet_len)
+			return -EINVAL;
+
 		exthdr = (struct ipv6_opt_hdr *)(skb_network_header(skb) +
 						 offset);
+		offset += ipv6_optlen(exthdr);
+		*nexthdr = &exthdr->nexthdr;
 	}
 
-	return offset;
+	return -EINVAL;
 }
 EXPORT_SYMBOL(ip6_find_1stfragopt);
 

@@ -98,6 +98,8 @@ static struct sk_buff *udp6_ufo_fragment
 		 * bytes to insert fragment header.
 		 */
 		unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
+		if (unfrag_ip6hlen < 0)
+			return ERR_PTR(unfrag_ip6hlen);
 		nexthdr = *prevhdr;
 		*prevhdr = NEXTHDR_FRAGMENT;
 		unfrag_len = (skb_network_header(skb) - skb_mac_header(skb)) +

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: "David S. Miller" <[email protected]>

[ Upstream commit 7dd7eb9513bd02184d45f000ab69d78cb1fa1531 ]

Do not use unsigned variables to see if it returns a negative error or not.

---
 net/ipv6/ip6_offload.c |    9 ++++-----
 net/ipv6/ip6_output.c  |    7 +++----
 net/ipv6/udp_offload.c |    8 +++++---
 3 files changed, 12 insertions(+), 12 deletions(-)

@@ -62,7 +62,6 @@ static struct sk_buff *ipv6_gso_segment(
 	const struct net_offload *ops;
 	int proto;
 	struct frag_hdr *fptr;
-	unsigned int unfrag_ip6hlen;
 	u8 *prevhdr;
 	int offset = 0;
 	bool encap, udpfrag;

@@ -121,10 +120,10 @@ static struct sk_buff *ipv6_gso_segment(
 		skb->network_header = (u8 *)ipv6h - skb->head;
 
 		if (udpfrag) {
-			unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
-			if (unfrag_ip6hlen < 0)
-				return ERR_PTR(unfrag_ip6hlen);
-			fptr = (struct frag_hdr *)((u8 *)ipv6h + unfrag_ip6hlen);
+			int err = ip6_find_1stfragopt(skb, &prevhdr);
+			if (err < 0)
+				return ERR_PTR(err);
+			fptr = (struct frag_hdr *)((u8 *)ipv6h + err);
 			fptr->frag_off = htons(offset);
 			if (skb->next)
 				fptr->frag_off |= htons(IP6_MF);

@@ -571,11 +571,10 @@ int ip6_fragment(struct net *net, struct
 	int ptr, offset = 0, err = 0;
 	u8 *prevhdr, nexthdr = 0;
 
-	hlen = ip6_find_1stfragopt(skb, &prevhdr);
-	if (hlen < 0) {
-		err = hlen;
+	err = ip6_find_1stfragopt(skb, &prevhdr);
+	if (err < 0)
 		goto fail;
-	}
+	hlen = err;
 	nexthdr = *prevhdr;
 
 	mtu = ip6_skb_dst_mtu(skb);

@@ -29,6 +29,7 @@ static struct sk_buff *udp6_ufo_fragment
 	u8 frag_hdr_sz = sizeof(struct frag_hdr);
 	__wsum csum;
 	int tnl_hlen;
+	int err;
 
 	mss = skb_shinfo(skb)->gso_size;
 	if (unlikely(skb->len <= mss))

@@ -97,9 +98,10 @@ static struct sk_buff *udp6_ufo_fragment
 		/* Find the unfragmentable header and shift it left by frag_hdr_sz
 		 * bytes to insert fragment header.
 		 */
-		unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
-		if (unfrag_ip6hlen < 0)
-			return ERR_PTR(unfrag_ip6hlen);
+		err = ip6_find_1stfragopt(skb, &prevhdr);
+		if (err < 0)
+			return ERR_PTR(err);
+		unfrag_ip6hlen = err;
 		nexthdr = *prevhdr;
 		*prevhdr = NEXTHDR_FRAGMENT;
 		unfrag_len = (skb_network_header(skb) - skb_mac_header(skb)) +

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tobias Jungel <[email protected]>

[ Upstream commit a285860211bf257b0e6d522dac6006794be348af ]

Currently it is allowed to set the default pvid of a bridge to a value above VLAN_VID_MASK (0xfff). This patch adds a check to br_validate and returns -EINVAL in case the pvid is out of bounds.

Reproduce by calling:

[root@test ~]# ip l a type bridge
[root@test ~]# ip l a type dummy
[root@test ~]# ip l s bridge0 type bridge vlan_filtering 1 [root@test ~]# ip l s bridge0 type bridge vlan_default_pvid 9999 [root@test ~]# ip l s dummy0 master bridge0
[root@test ~]# bridge vlan
port vlan ids
bridge0 9999 PVID Egress Untagged

dummy0 9999 PVID Egress Untagged

---
 net/bridge/br_netlink.c |    7 +++++++
 1 file changed, 7 insertions(+)

@@ -768,6 +768,13 @@ static int br_validate(struct nlattr *tb
 			return -EPROTONOSUPPORT;
 		}
 	}
+
+	if (data[IFLA_BR_VLAN_DEFAULT_PVID]) {
+		__u16 defpvid = nla_get_u16(data[IFLA_BR_VLAN_DEFAULT_PVID]);
+
+		if (defpvid >= VLAN_VID_MASK)
+			return -EINVAL;
+	}
 #endif
 
 	return 0;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit 6d18c732b95c0a9d35e9f978b4438bba15412284 ]

Since commit 76b91c32dd86 ("bridge: stp: when using userspace stp stop kernel hello and hold timers"), bridge would not start hello_timer if stp_enabled is not KERNEL_STP when br_dev_open.

The problem is even if users set stp_enabled with KERNEL_STP later, the timer will still not be started. It causes that KERNEL_STP can not really work. Users have to re-ifup the bridge to avoid this.

This patch is to fix it by starting br->hello_timer when enabling KERNEL_STP in br_stp_start.

As an improvement, it's also to start hello_timer again only when br->stp_enabled is KERNEL_STP in br_hello_timer_expired, there is no reason to start the timer again when it's NO_STP.

---
 net/bridge/br_stp_if.c    |    1 +
 net/bridge/br_stp_timer.c |    2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

@@ -166,6 +166,7 @@ static void br_stp_start(struct net_brid
 		br_debug(br, "using kernel STP\n");
 
 		/* To start timers on any ports left in blocking */
+		mod_timer(&br->hello_timer, jiffies + br->hello_time);
 		br_port_state_selection(br);
 	}
 

@@ -40,7 +40,7 @@ static void br_hello_timer_expired(unsig
 	if (br->dev->flags & IFF_UP) {
 		br_config_bpdu_generation(br);
 
-		if (br->stp_enabled != BR_USER_STP)
+		if (br->stp_enabled == BR_KERNEL_STP)
 			mod_timer(&br->hello_timer,
 				  round_jiffies(jiffies + br->hello_time));
 	}

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 232cd35d0804cc241eb887bb8d4d9b3b9881c64a ]

Andrey Konovalov and [email protected] reported crashes caused by one skb shared_info being overwritten from __ip6_append_data()

Andrey program lead to following state :

copy -4200 datalen 2000 fraglen 2040
maxfraglen 2040 alloclen 2048 transhdrlen 0 offset 0 fraggap 6200

The skb_copy_and_csum_bits(skb_prev, maxfraglen, data + transhdrlen, fraggap, 0); is overwriting skb->head and skb_shared_info

Since we apparently detect this rare condition too late, move the code earlier to even avoid allocating skb and risking crashes.

Once again, many thanks to Andrey and syzkaller team.

---
 net/ipv6/ip6_output.c |   15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

@@ -1432,6 +1432,11 @@ alloc_new_skb:
 			 */
 			alloclen += sizeof(struct frag_hdr);
 
+			copy = datalen - transhdrlen - fraggap;
+			if (copy < 0) {
+				err = -EINVAL;
+				goto error;
+			}
 			if (transhdrlen) {
 				skb = sock_alloc_send_skb(sk,
 						alloclen + hh_len,

@@ -1481,13 +1486,9 @@ alloc_new_skb:
 				data += fraggap;
 				pskb_trim_unique(skb_prev, maxfraglen);
 			}
-			copy = datalen - transhdrlen - fraggap;
-
-			if (copy < 0) {
-				err = -EINVAL;
-				kfree_skb(skb);
-				goto error;
-			} else if (copy > 0 && getfrag(from, data + transhdrlen, offset, copy, fraggap, skb) < 0) {
+			if (copy > 0 &&
+			    getfrag(from, data + transhdrlen, offset,
+				    copy, fraggap, skb) < 0) {
 				err = -EFAULT;
 				kfree_skb(skb);
 				goto error;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vlad Yasevich <[email protected]>

[ Upstream commit cc6e9de62a7f84c9293a2ea41bc412b55bb46e85 ]

At least some of the be2net cards do not seem to be capabled of performing checksum offload computions on Q-in-Q packets. In these case, the recevied checksum on the remote is invalid and TCP syn packets are dropped.

This patch adds a call to check disbled acceleration features on Q-in-Q tagged traffic.

---
 drivers/net/ethernet/emulex/benet/be_main.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -5260,9 +5260,11 @@ static netdev_features_t be_features_che
 	struct be_adapter *adapter = netdev_priv(dev);
 	u8 l4_hdr = 0;
 
-	/* The code below restricts offload features for some tunneled packets.
+	/* The code below restricts offload features for some tunneled and
+	 * Q-in-Q packets.
 	 * Offload features for normal (non tunnel) packets are unchanged.
 	 */
+	features = vlan_features_check(skb, features);
 	if (!skb->encapsulation ||
 	    !(adapter->flags & BE_FLAGS_VXLAN_OFFLOADS))
 		return features;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vlad Yasevich <[email protected]>

[ Upstream commit 2836b4f224d4fd7d1a2b23c3eecaf0f0ae199a74 ]

Since virtio does not provide it's own ndo_features_check handler, TSO, and now checksum offload, are disabled for stacked vlans. Re-enable the support and let the host take care of it. This restores/improves Guest-to-Guest performance over Q-in-Q vlans.

---
 drivers/net/virtio_net.c |    1 +
 1 file changed, 1 insertion(+)

@@ -1415,6 +1415,7 @@ static const struct net_device_ops virtn
 #ifdef CONFIG_NET_RX_BUSY_POLL
 	.ndo_busy_poll		= virtnet_busy_poll,
 #endif
+	.ndo_features_check	= passthru_features_check,
 };
 
 static void virtnet_config_changed_work(struct work_struct *work)

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wei Wang <[email protected]>

[ Upstream commit ba615f675281d76fd19aa03558777f81fb6b6084 ]

Fastopen API should be used to perform fastopen operations on the TCP socket. It does not make sense to use fastopen API to perform disconnect by calling it with AF_UNSPEC. The fastopen data path is also prone to race conditions and bugs when using with AF_UNSPEC.

One issue reported and analyzed by Vegard Nossum is as follows:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Thread A: Thread B:
------------------------------------------------------------------------
sendto()
- tcp_sendmsg()
- sk_stream_memory_free() = 0
- goto wait_for_sndbuf
- sk_stream_wait_memory()
- sk_wait_event() // sleep
| sendto(flags=MSG_FASTOPEN, dest_addr=AF_UNSPEC)
| - tcp_sendmsg()
| - tcp_sendmsg_fastopen()
| - __inet_stream_connect()
| - tcp_disconnect() //because of AF_UNSPEC
| - tcp_transmit_skb()// send RST
| - return 0; // no reconnect!
| - sk_stream_wait_connect()
| - sock_error()
| - xchg(&sk->sk_err, 0)
| - return -ECONNRESET
- ... // wake up, see sk->sk_err == 0
- skb_entail() on TCP_CLOSE socket

If the connection is reopened then we will send a brand new SYN packet after thread A has already queued a buffer. At this point I think the socket internal state (sequence numbers etc.) becomes messed up.

When the new connection is closed, the FIN-ACK is rejected because the sequence number is outside the window. The other side tries to retransmit,
but __tcp_retransmit_skb() calls tcp_trim_head() on an empty skb which corrupts the skb data length and hits a BUG() in copy_and_csum_bits().
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Hence, this patch adds a check for AF_UNSPEC in the fastopen data path and return EOPNOTSUPP to user if such case happens.

---
 net/ipv4/tcp.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

@@ -1071,9 +1071,12 @@ static int tcp_sendmsg_fastopen(struct s
 				int *copied, size_t size)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
+	struct sockaddr *uaddr = msg->msg_name;
 	int err, flags;
 
-	if (!(sysctl_tcp_fastopen & TFO_CLIENT_ENABLE))
+	if (!(sysctl_tcp_fastopen & TFO_CLIENT_ENABLE) ||
+	    (uaddr && msg->msg_namelen >= sizeof(uaddr->sa_family) &&
+	     uaddr->sa_family == AF_UNSPEC))
 		return -EOPNOTSUPP;
 	if (tp->fastopen_req)
 		return -EALREADY; /* Another Fast Open is in progress */

@@ -1086,7 +1089,7 @@ static int tcp_sendmsg_fastopen(struct s
 	tp->fastopen_req->size = size;
 
 	flags = (msg->msg_flags & MSG_DONTWAIT) ? O_NONBLOCK : 0;
-	err = __inet_stream_connect(sk->sk_socket, msg->msg_name,
+	err = __inet_stream_connect(sk->sk_socket, uaddr,
 				    msg->msg_namelen, flags);
 	*copied = tp->fastopen_req->copied;
 	tcp_free_fastopen_req(tp);

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Davide Caratti <[email protected]>

[ Upstream commit 804ec7ebe8ea003999ca8d1bfc499edc6a9e07df ]

sometimes ICMP replies to INIT chunks are ignored by the client, even if the encapsulated SCTP headers match an open socket. This happens when the ICMP packet is carried by a paged skb: use skb_header_pointer() to read packet contents beyond the SCTP header, so that chunk header and initiate tag are validated correctly.

v2:
- don't use skb_header_pointer() to read the transport header, since icmp_socket_deliver() already puts these 8 bytes in the linear area.
- change commit message to make specific reference to INIT chunks.

---
 net/sctp/input.c |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

@@ -472,15 +472,14 @@ struct sock *sctp_err_lookup(struct net
 			     struct sctp_association **app,
 			     struct sctp_transport **tpp)
 {
+	struct sctp_init_chunk *chunkhdr, _chunkhdr;
 	union sctp_addr saddr;
 	union sctp_addr daddr;
 	struct sctp_af *af;
 	struct sock *sk = NULL;
 	struct sctp_association *asoc;
 	struct sctp_transport *transport = NULL;
-	struct sctp_init_chunk *chunkhdr;
 	__u32 vtag = ntohl(sctphdr->vtag);
-	int len = skb->len - ((void *)sctphdr - (void *)skb->data);
 
 	*app = NULL; *tpp = NULL;
 

@@ -515,13 +514,16 @@ struct sock *sctp_err_lookup(struct net
 	 * discard the packet.
 	 */
 	if (vtag == 0) {
-		chunkhdr = (void *)sctphdr + sizeof(struct sctphdr);
-		if (len < sizeof(struct sctphdr) + sizeof(sctp_chunkhdr_t)
-			  + sizeof(__be32) ||
+		/* chunk header + first 4 octects of init header */
+		chunkhdr = skb_header_pointer(skb, skb_transport_offset(skb) +
+					      sizeof(struct sctphdr),
+					      sizeof(struct sctp_chunkhdr) +
+					      sizeof(__be32), &_chunkhdr);
+		if (!chunkhdr ||
 		    chunkhdr->chunk_hdr.type != SCTP_CID_INIT ||
-		    ntohl(chunkhdr->init_hdr.init_tag) != asoc->c.my_vtag) {
+		    ntohl(chunkhdr->init_hdr.init_tag) != asoc->c.my_vtag)
 			goto out;
-		}
+
 	} else if (vtag != asoc->c.peer_vtag) {
 		goto out;
 	}

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 3fb07daff8e99243366a081e5129560734de4ada ]

Andrey Konovalov reported crashes in ipv4_mtu()

I could reproduce the issue with KASAN kernels, between 10.246.7.151 and 10.246.7.152 :

1) 20 concurrent netperf -t TCP_RR -H 10.246.7.152 -l 1000 &

2) At the same time run following loop :
while :
do
ip ro add 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500 ip ro del 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
done

Cong Wang attempted to add back rt->fi in commit 82486aa6f1b9 ("ipv4: restore rt->fi for reference counting") but this proved to add some issues that were complex to solve.

Instead, I suggested to add a refcount to the metrics themselves, being a standalone object (in particular, no reference to other objects)

I tried to make this patch as small as possible to ease its backport, instead of being super clean. Note that we believe that only ipv4 dst need to take care of the metric refcount. But if this is wrong, this patch adds the basic infrastructure to extend this to other families.

Many thanks to Julian Anastasov for reviewing this patch, and Cong Wang for his efforts on this problem.

---
 include/net/dst.h        |    8 +++++++-
 include/net/ip_fib.h     |   10 +++++-----
 net/core/dst.c           |   23 ++++++++++++++---------
 net/ipv4/fib_semantics.c |   17 ++++++++++-------
 net/ipv4/route.c         |   10 +++++++++-
 5 files changed, 45 insertions(+), 23 deletions(-)

@@ -110,10 +110,16 @@ struct dst_entry {
 	};
 };
 
+struct dst_metrics {
+	u32		metrics[RTAX_MAX];
+	atomic_t	refcnt;
+};
+extern const struct dst_metrics dst_default_metrics;
+
 u32 *dst_cow_metrics_generic(struct dst_entry *dst, unsigned long old);
-extern const u32 dst_default_metrics[];
 
 #define DST_METRICS_READ_ONLY		0x1UL
+#define DST_METRICS_REFCOUNTED		0x2UL
 #define DST_METRICS_FLAGS		0x3UL
 #define __DST_METRICS_PTR(Y)	\
 	((u32 *)((Y) & ~DST_METRICS_FLAGS))

@@ -112,11 +112,11 @@ struct fib_info {
 	unsigned char		fib_type;
 	__be32			fib_prefsrc;
 	u32			fib_priority;
-	u32			*fib_metrics;
-#define fib_mtu fib_metrics[RTAX_MTU-1]
-#define fib_window fib_metrics[RTAX_WINDOW-1]
-#define fib_rtt fib_metrics[RTAX_RTT-1]
-#define fib_advmss fib_metrics[RTAX_ADVMSS-1]
+	struct dst_metrics	*fib_metrics;
+#define fib_mtu fib_metrics->metrics[RTAX_MTU-1]
+#define fib_window fib_metrics->metrics[RTAX_WINDOW-1]
+#define fib_rtt fib_metrics->metrics[RTAX_RTT-1]
+#define fib_advmss fib_metrics->metrics[RTAX_ADVMSS-1]
 	int			fib_nhs;
 #ifdef CONFIG_IP_ROUTE_MULTIPATH
 	int			fib_weight;

@@ -151,13 +151,13 @@ int dst_discard_out(struct net *net, str
 }
 EXPORT_SYMBOL(dst_discard_out);
 
-const u32 dst_default_metrics[RTAX_MAX + 1] = {
+const struct dst_metrics dst_default_metrics = {
 	/* This initializer is needed to force linker to place this variable
 	 * into const section. Otherwise it might end into bss section.
 	 * We really want to avoid false sharing on this variable, and catch
 	 * any writes on it.
 	 */
-	[RTAX_MAX] = 0xdeadbeef,
+	.refcnt = ATOMIC_INIT(1),
 };
 
 void dst_init(struct dst_entry *dst, struct dst_ops *ops,

@@ -169,7 +169,7 @@ void dst_init(struct dst_entry *dst, str
 	if (dev)
 		dev_hold(dev);
 	dst->ops = ops;
-	dst_init_metrics(dst, dst_default_metrics, true);
+	dst_init_metrics(dst, dst_default_metrics.metrics, true);
 	dst->expires = 0UL;
 	dst->path = dst;
 	dst->from = NULL;

@@ -315,25 +315,30 @@ EXPORT_SYMBOL(dst_release);
 
 u32 *dst_cow_metrics_generic(struct dst_entry *dst, unsigned long old)
 {
-	u32 *p = kmalloc(sizeof(u32) * RTAX_MAX, GFP_ATOMIC);
+	struct dst_metrics *p = kmalloc(sizeof(*p), GFP_ATOMIC);
 
 	if (p) {
-		u32 *old_p = __DST_METRICS_PTR(old);
+		struct dst_metrics *old_p = (struct dst_metrics *)__DST_METRICS_PTR(old);
 		unsigned long prev, new;
 
-		memcpy(p, old_p, sizeof(u32) * RTAX_MAX);
+		atomic_set(&p->refcnt, 1);
+		memcpy(p->metrics, old_p->metrics, sizeof(p->metrics));
 
 		new = (unsigned long) p;
 		prev = cmpxchg(&dst->_metrics, old, new);
 
 		if (prev != old) {
 			kfree(p);
-			p = __DST_METRICS_PTR(prev);
+			p = (struct dst_metrics *)__DST_METRICS_PTR(prev);
 			if (prev & DST_METRICS_READ_ONLY)
 				p = NULL;
+		} else if (prev & DST_METRICS_REFCOUNTED) {
+			if (atomic_dec_and_test(&old_p->refcnt))
+				kfree(old_p);
 		}
 	}
-	return p;
+	BUILD_BUG_ON(offsetof(struct dst_metrics, metrics) != 0);
+	return (u32 *)p;
 }
 EXPORT_SYMBOL(dst_cow_metrics_generic);
 

@@ -342,7 +347,7 @@ void __dst_destroy_metrics_generic(struc
 {
 	unsigned long prev, new;
 
-	new = ((unsigned long) dst_default_metrics) | DST_METRICS_READ_ONLY;
+	new = ((unsigned long) &dst_default_metrics) | DST_METRICS_READ_ONLY;
 	prev = cmpxchg(&dst->_metrics, old, new);
 	if (prev == old)
 		kfree(__DST_METRICS_PTR(old));

@@ -204,6 +204,7 @@ static void rt_fibinfo_free_cpus(struct
 static void free_fib_info_rcu(struct rcu_head *head)
 {
 	struct fib_info *fi = container_of(head, struct fib_info, rcu);
+	struct dst_metrics *m;
 
 	change_nexthops(fi) {
 		if (nexthop_nh->nh_dev)

@@ -214,8 +215,9 @@ static void free_fib_info_rcu(struct rcu
 		rt_fibinfo_free(&nexthop_nh->nh_rth_input);
 	} endfor_nexthops(fi);
 
-	if (fi->fib_metrics != (u32 *) dst_default_metrics)
-		kfree(fi->fib_metrics);
+	m = fi->fib_metrics;
+	if (m != &dst_default_metrics && atomic_dec_and_test(&m->refcnt))
+		kfree(m);
 	kfree(fi);
 }
 

@@ -982,11 +984,11 @@ fib_convert_metrics(struct fib_info *fi,
 			val = 255;
 		if (type == RTAX_FEATURES && (val & ~RTAX_FEATURE_MASK))
 			return -EINVAL;
-		fi->fib_metrics[type - 1] = val;
+		fi->fib_metrics->metrics[type - 1] = val;
 	}
 
 	if (ecn_ca)
-		fi->fib_metrics[RTAX_FEATURES - 1] |= DST_FEATURE_ECN_CA;
+		fi->fib_metrics->metrics[RTAX_FEATURES - 1] |= DST_FEATURE_ECN_CA;
 
 	return 0;
 }

@@ -1044,11 +1046,12 @@ struct fib_info *fib_create_info(struct
 		goto failure;
 	fib_info_cnt++;
 	if (cfg->fc_mx) {
-		fi->fib_metrics = kzalloc(sizeof(u32) * RTAX_MAX, GFP_KERNEL);
+		fi->fib_metrics = kzalloc(sizeof(*fi->fib_metrics), GFP_KERNEL);
 		if (!fi->fib_metrics)
 			goto failure;
+		atomic_set(&fi->fib_metrics->refcnt, 1);
 	} else
-		fi->fib_metrics = (u32 *) dst_default_metrics;
+		fi->fib_metrics = (struct dst_metrics *)&dst_default_metrics;
 
 	fi->fib_net = net;
 	fi->fib_protocol = cfg->fc_protocol;

@@ -1251,7 +1254,7 @@ int fib_dump_info(struct sk_buff *skb, u
 	if (fi->fib_priority &&
 	    nla_put_u32(skb, RTA_PRIORITY, fi->fib_priority))
 		goto nla_put_failure;
-	if (rtnetlink_put_metrics(skb, fi->fib_metrics) < 0)
+	if (rtnetlink_put_metrics(skb, fi->fib_metrics->metrics) < 0)
 		goto nla_put_failure;
 
 	if (fi->fib_prefsrc &&

@@ -1356,8 +1356,12 @@ static void rt_add_uncached_list(struct
 
 static void ipv4_dst_destroy(struct dst_entry *dst)
 {
+	struct dst_metrics *p = (struct dst_metrics *)DST_METRICS_PTR(dst);
 	struct rtable *rt = (struct rtable *) dst;
 
+	if (p != &dst_default_metrics && atomic_dec_and_test(&p->refcnt))
+		kfree(p);
+
 	if (!list_empty(&rt->rt_uncached)) {
 		struct uncached_list *ul = rt->rt_uncached_list;
 

@@ -1409,7 +1413,11 @@ static void rt_set_nexthop(struct rtable
 			rt->rt_gateway = nh->nh_gw;
 			rt->rt_uses_gateway = 1;
 		}
-		dst_init_metrics(&rt->dst, fi->fib_metrics, true);
+		dst_init_metrics(&rt->dst, fi->fib_metrics->metrics, true);
+		if (fi->fib_metrics != &dst_default_metrics) {
+			rt->dst._metrics |= DST_METRICS_REFCOUNTED;
+			atomic_inc(&fi->fib_metrics->refcnt);
+		}
 #ifdef CONFIG_IP_ROUTE_CLASSID
 		rt->dst.tclassid = nh->nh_tclassid;
 #endif

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

commit f6ba8d33cfbb46df569972e64dbb5bb7e929bfd9 upstream.

I should have known that lowering skb->truesize was dangerous :/

In case packets are not leaving the host via a standard Ethernet device, but looped back to local sockets, bad things can happen, as reported by Michael Madsen ( https://bugzilla.kernel.org/show_bug.cgi?id=195713 )

So instead of tweaking skb->truesize, lets change skb->destructor and keep a reference on the owner socket via its sk_refcnt.

---
 net/core/sock.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

@@ -1690,17 +1690,17 @@ EXPORT_SYMBOL(skb_set_owner_w);
 
 void skb_orphan_partial(struct sk_buff *skb)
 {
-	/* TCP stack sets skb->ooo_okay based on sk_wmem_alloc,
-	 * so we do not completely orphan skb, but transfert all
-	 * accounted bytes but one, to avoid unexpected reorders.
-	 */
 	if (skb->destructor == sock_wfree
 #ifdef CONFIG_INET
 	    || skb->destructor == tcp_wfree
 #endif
 		) {
-		atomic_sub(skb->truesize - 1, &skb->sk->sk_wmem_alloc);
-		skb->truesize = 1;
+		struct sock *sk = skb->sk;
+
+		if (atomic_inc_not_zero(&sk->sk_refcnt)) {
+			atomic_sub(skb->truesize, &sk->sk_wmem_alloc);
+			skb->destructor = sock_efree;
+		}
 	} else {
 		skb_orphan(skb);
 	}

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrew Lunn <[email protected]>

commit f2899788353c13891412b273fdff5f02d49aa40f upstream.

The 88m1101 has an errata when configuring autoneg. However, it was being applied to many other Marvell PHYs as well. Limit its scope to just the 88m1101.

---
 drivers/net/phy/marvell.c |   66 +++++++++++++++++++++++++---------------------
 1 file changed, 37 insertions(+), 29 deletions(-)

@@ -203,34 +203,6 @@ static int marvell_config_aneg(struct ph
 {
 	int err;
 
-	/* The Marvell PHY has an errata which requires
-	 * that certain registers get written in order
-	 * to restart autonegotiation */
-	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
-
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1d, 0x1f);
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1e, 0x200c);
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1d, 0x5);
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1e, 0);
-	if (err < 0)
-		return err;
-
-	err = phy_write(phydev, 0x1e, 0x100);
-	if (err < 0)
-		return err;
-
 	err = marvell_set_polarity(phydev, phydev->mdix);
 	if (err < 0)
 		return err;

@@ -264,6 +236,42 @@ static int marvell_config_aneg(struct ph
 	return 0;
 }
 
+static int m88e1101_config_aneg(struct phy_device *phydev)
+{
+	int err;
+
+	/* This Marvell PHY has an errata which requires
+	 * that certain registers get written in order
+	 * to restart autonegotiation
+	 */
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1d, 0x1f);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1e, 0x200c);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1d, 0x5);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1e, 0);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1e, 0x100);
+	if (err < 0)
+		return err;
+
+	return marvell_config_aneg(phydev);
+}
+
 #ifdef CONFIG_OF_MDIO
 /*
  * Set and/or override some configuration registers based on the

@@ -993,7 +1001,7 @@ static struct phy_driver marvell_drivers
 		.name = "Marvell 88E1101",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
-		.config_aneg = &marvell_config_aneg,
+		.config_aneg = &m88e1101_config_aneg,
 		.read_status = &genphy_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vlad Yasevich <[email protected]>

commit 35d2f80b07bbe03fb358afb0bdeff7437a7d67ff upstream.

It appears that TCP checksum offloading has been broken for Q-in-Q vlans. The behavior was execerbated by the series

    commit afb0bc972b52 ("Merge branch 'stacked_vlan_tso'")

that that enabled accleleration features on stacked vlans.

However, event without that series, it is possible to trigger this issue. It just requires a lot more specialized configuration.

The root cause is the interaction between how netdev_intersect_features() works, the features actually set on the vlan devices and HW having the ability to run checksum with longer headers.

The issue starts when netdev_interesect_features() replaces NETIF_F_HW_CSUM with a combination of NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM, if the HW advertises IP|IPV6 specific checksums. This happens
for tagged and multi-tagged packets. However, HW that enables
IP|IPV6 checksum offloading doesn't gurantee that packets with arbitrarily long headers can be checksummed.

This patch disables IP|IPV6 checksums on the packet for multi-tagged packets.

---
 include/linux/if_vlan.h |   19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

@@ -616,15 +616,16 @@ static inline bool skb_vlan_tagged_multi
 static inline netdev_features_t vlan_features_check(const struct sk_buff *skb,
 						    netdev_features_t features)
 {
-	if (skb_vlan_tagged_multi(skb))
-		features = netdev_intersect_features(features,
-						     NETIF_F_SG |
-						     NETIF_F_HIGHDMA |
-						     NETIF_F_FRAGLIST |
-						     NETIF_F_GEN_CSUM |
-						     NETIF_F_HW_VLAN_CTAG_TX |
-						     NETIF_F_HW_VLAN_STAG_TX);
-
+	if (skb_vlan_tagged_multi(skb)) {
+		/* In the case of multi-tagged packets, use a direct mask
+		 * instead of using netdev_interesect_features(), to make
+		 * sure that only devices supporting NETIF_F_HW_CSUM will
+		 * have checksum offloading support.
+		 */
+		features &= NETIF_F_SG | NETIF_F_HIGHDMA | NETIF_F_HW_CSUM |
+			    NETIF_F_FRAGLIST | NETIF_F_HW_VLAN_CTAG_TX |
+			    NETIF_F_HW_VLAN_STAG_TX;
+	}
 	return features;
 }
 

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sebastian Reichel <[email protected]>

commit 5165da5923d6c7df6f2927b0113b2e4d9288661e upstream.

Since v4.9 i2c-tiny-usb generates the below call trace and longer works, since it can't communicate with the USB device. The reason is, that since v4.9 the USB stack checks, that the buffer it should transfer is DMA capable. This was a requirement since v2.2 days, but it usually worked nevertheless.

[   17.504959] ------------[ cut here ]------------
[   17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570
[   17.506545] transfer buffer not dma capable
[   17.507022] Modules linked in:
[   17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10
[   17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   17.509039] Call Trace:
[   17.509320]  ? dump_stack+0x5c/0x78
[   17.509714]  ? __warn+0xbe/0xe0
[   17.510073]  ? warn_slowpath_fmt+0x5a/0x80
[   17.510532]  ? nommu_map_sg+0xb0/0xb0
[   17.510949]  ? usb_hcd_map_urb_for_dma+0x37c/0x570
[   17.511482]  ? usb_hcd_submit_urb+0x336/0xab0
[   17.511976]  ? wait_for_completion_timeout+0x12f/0x1a0
[   17.512549]  ? wait_for_completion_timeout+0x65/0x1a0
[   17.513125]  ? usb_start_wait_urb+0x65/0x160
[   17.513604]  ? usb_control_msg+0xdc/0x130
[   17.514061]  ? usb_xfer+0xa4/0x2a0
[   17.514445]  ? __i2c_transfer+0x108/0x3c0
[   17.514899]  ? i2c_transfer+0x57/0xb0
[   17.515310]  ? i2c_smbus_xfer_emulated+0x12f/0x590
[   17.515851]  ? _raw_spin_unlock_irqrestore+0x11/0x20
[   17.516408]  ? i2c_smbus_xfer+0x125/0x330
[   17.516876]  ? i2c_smbus_xfer+0x125/0x330
[   17.517329]  ? i2cdev_ioctl_smbus+0x1c1/0x2b0
[   17.517824]  ? i2cdev_ioctl+0x75/0x1c0
[   17.518248]  ? do_vfs_ioctl+0x9f/0x600
[   17.518671]  ? vfs_write+0x144/0x190
[   17.519078]  ? SyS_ioctl+0x74/0x80
[   17.519463]  ? entry_SYSCALL_64_fastpath+0x1e/0xad
[   17.519959] ---[ end trace d047c04982f5ac50 ]---

---
 drivers/i2c/busses/i2c-tiny-usb.c |   25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

@@ -178,22 +178,39 @@ static int usb_read(struct i2c_adapter *
 		    int value, int index, void *data, int len)
 {
 	struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
+	void *dmadata = kmalloc(len, GFP_KERNEL);
+	int ret;
+
+	if (!dmadata)
+		return -ENOMEM;
 
 	/* do control transfer */
-	return usb_control_msg(dev->usb_dev, usb_rcvctrlpipe(dev->usb_dev, 0),
+	ret = usb_control_msg(dev->usb_dev, usb_rcvctrlpipe(dev->usb_dev, 0),
 			       cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
-			       USB_DIR_IN, value, index, data, len, 2000);
+			       USB_DIR_IN, value, index, dmadata, len, 2000);
+
+	memcpy(data, dmadata, len);
+	kfree(dmadata);
+	return ret;
 }
 
 static int usb_write(struct i2c_adapter *adapter, int cmd,
 		     int value, int index, void *data, int len)
 {
 	struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
+	void *dmadata = kmemdup(data, len, GFP_KERNEL);
+	int ret;
+
+	if (!dmadata)
+		return -ENOMEM;
 
 	/* do control transfer */
-	return usb_control_msg(dev->usb_dev, usb_sndctrlpipe(dev->usb_dev, 0),
+	ret = usb_control_msg(dev->usb_dev, usb_sndctrlpipe(dev->usb_dev, 0),
 			       cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
-			       value, index, data, len, 2000);
+			       value, index, dmadata, len, 2000);
+
+	kfree(dmadata);
+	return ret;
 }
 
 static void i2c_tiny_usb_free(struct i2c_tiny_usb *dev)

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Srinath Mannam <[email protected]>

commit f5f968f2371ccdebb8a365487649673c9af68d09 upstream.

The stingray SDHCI hardware supports ACMD12 and automatically issues after multi block transfer completed.

If ACMD12 in SDHCI is disabled, spurious tx done interrupts are seen on multi block read command with below error message:

Got data interrupt 0x00000002 even though no data
operation was in progress.

This patch uses SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 to enable ACM12 support in SDHCI hardware and suppress spurious interrupt.

---
 drivers/mmc/host/sdhci-iproc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -156,7 +156,8 @@ static const struct sdhci_ops sdhci_ipro
 };
 
 static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = {
-	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
+	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+		  SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
 	.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN,
 	.ops = &sdhci_iproc_ops,
 };

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jason Gerecke <[email protected]>

commit 2ac97f0f6654da14312d125005c77a6010e0ea38 upstream.

The following Smatch complaint was generated in response to commit 2a6cdbd ("HID: wacom: Introduce new 'touch_input' device"):

    drivers/hid/wacom_wac.c:1586 wacom_tpc_irq()
             error: we previously assumed 'wacom->touch_input' could be null (see line 1577)

The 'touch_input' and 'pen_input' variables point to the 'struct input_dev' used for relaying touch and pen events to userspace, respectively. If a device does not have a touch interface or pen interface, the associated input variable is NULL. The 'wacom_tpc_irq()' function is responsible for forwarding input reports to a more-specific IRQ handler function. An unknown report could theoretically be mistaken as e.g. a touch report on a device which does not have a touch interface. This can be prevented by only calling the pen/touch functions are called when the pen/touch pointers are valid.

---
 drivers/hid/wacom_wac.c |   47 ++++++++++++++++++++++++-----------------------
 1 file changed, 24 insertions(+), 23 deletions(-)

@@ -1440,37 +1440,38 @@ static int wacom_tpc_irq(struct wacom_wa
 {
 	unsigned char *data = wacom->data;
 
-	if (wacom->pen_input)
+	if (wacom->pen_input) {
 		dev_dbg(wacom->pen_input->dev.parent,
 			"%s: received report #%d\n", __func__, data[0]);
-	else if (wacom->touch_input)
+
+		if (len == WACOM_PKGLEN_PENABLED ||
+		    data[0] == WACOM_REPORT_PENABLED)
+			return wacom_tpc_pen(wacom);
+	}
+	else if (wacom->touch_input) {
 		dev_dbg(wacom->touch_input->dev.parent,
 			"%s: received report #%d\n", __func__, data[0]);
 
-	switch (len) {
-	case WACOM_PKGLEN_TPC1FG:
-		return wacom_tpc_single_touch(wacom, len);
-
-	case WACOM_PKGLEN_TPC2FG:
-		return wacom_tpc_mt_touch(wacom);
-
-	case WACOM_PKGLEN_PENABLED:
-		return wacom_tpc_pen(wacom);
-
-	default:
-		switch (data[0]) {
-		case WACOM_REPORT_TPC1FG:
-		case WACOM_REPORT_TPCHID:
-		case WACOM_REPORT_TPCST:
-		case WACOM_REPORT_TPC1FGE:
+		switch (len) {
+		case WACOM_PKGLEN_TPC1FG:
 			return wacom_tpc_single_touch(wacom, len);
 
-		case WACOM_REPORT_TPCMT:
-		case WACOM_REPORT_TPCMT2:
-			return wacom_mt_touch(wacom);
+		case WACOM_PKGLEN_TPC2FG:
+			return wacom_tpc_mt_touch(wacom);
 
-		case WACOM_REPORT_PENABLED:
-			return wacom_tpc_pen(wacom);
+		default:
+			switch (data[0]) {
+			case WACOM_REPORT_TPC1FG:
+			case WACOM_REPORT_TPCHID:
+			case WACOM_REPORT_TPCST:
+			case WACOM_REPORT_TPC1FGE:
+				return wacom_tpc_single_touch(wacom, len);
+
+			case WACOM_REPORT_TPCMT:
+			case WACOM_REPORT_TPCMT2:
+				return wacom_mt_touch(wacom);
+
+			}
 		}
 	}
 

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ram Pai <[email protected]>

commit f2e767bb5d6ee0d988cb7d4e54b0b21175802b6b upstream.

The firmware or device, possibly under a heavy I/O load, can return on a partial unaligned boundary. Scsi-ml expects these requests to be completed on an alignment boundary. Scsi-ml blindly requeues the I/O without checking the alignment boundary of the I/O request for the remaining bytes. This leads to errors, since devices cannot perform non-aligned read/write operations.

This patch fixes the issue in the driver. It aligns unaligned completions of FS requests, by truncating them to the nearest alignment boundary.

[mkp: simplified if statement]

---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

@@ -4452,6 +4452,7 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *i
 	struct MPT3SAS_DEVICE *sas_device_priv_data;
 	u32 response_code = 0;
 	unsigned long flags;
+	unsigned int sector_sz;
 
 	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
 	scmd = _scsih_scsi_lookup_get_clear(ioc, smid);

@@ -4510,6 +4511,20 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *i
 	}
 
 	xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
+
+	/* In case of bogus fw or device, we could end up having
+	 * unaligned partial completion. We can force alignment here,
+	 * then scsi-ml does not need to handle this misbehavior.
+	 */
+	sector_sz = scmd->device->sector_size;
+	if (unlikely(scmd->request->cmd_type == REQ_TYPE_FS && sector_sz &&
+		     xfer_cnt % sector_sz)) {
+		sdev_printk(KERN_INFO, scmd->device,
+		    "unaligned partial completion avoided (xfer_cnt=%u, sector_sz=%u)\n",
+			    xfer_cnt, sector_sz);
+		xfer_cnt = round_down(xfer_cnt, sector_sz);
+	}
+
 	scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
 	if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
 		log_info =  le32_to_cpu(mpi_reply->IOCLogInfo);

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nicolas Iooss <[email protected]>

commit ff5a20169b98d84ad8d7f99f27c5ebbb008204d6 upstream.

Commit 5b5e0928f742 ("lib/vsprintf.c: remove %Z support") removed some usages of format %Z but forgot "%.2Zx". This makes clang 4.0 reports a -Wformat-extra-args warning because it does not know about %Z.

Replace %Z with %z.

---
 drivers/char/pcmcia/cm4040_cs.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

@@ -374,7 +374,7 @@ static ssize_t cm4040_write(struct file
 
 	rc = write_sync_reg(SCR_HOST_TO_READER_START, dev);
 	if (rc <= 0) {
-		DEBUGP(5, dev, "write_sync_reg c=%.2Zx\n", rc);
+		DEBUGP(5, dev, "write_sync_reg c=%.2zx\n", rc);
 		DEBUGP(2, dev, "<- cm4040_write (failed)\n");
 		if (rc == -ERESTARTSYS)
 			return rc;

@@ -387,7 +387,7 @@ static ssize_t cm4040_write(struct file
 	for (i = 0; i < bytes_to_write; i++) {
 		rc = wait_for_bulk_out_ready(dev);
 		if (rc <= 0) {
-			DEBUGP(5, dev, "wait_for_bulk_out_ready rc=%.2Zx\n",
+			DEBUGP(5, dev, "wait_for_bulk_out_ready rc=%.2zx\n",
 			       rc);
 			DEBUGP(2, dev, "<- cm4040_write (failed)\n");
 			if (rc == -ERESTARTSYS)

@@ -403,7 +403,7 @@ static ssize_t cm4040_write(struct file
 	rc = write_sync_reg(SCR_HOST_TO_READER_DONE, dev);
 
 	if (rc <= 0) {
-		DEBUGP(5, dev, "write_sync_reg c=%.2Zx\n", rc);
+		DEBUGP(5, dev, "write_sync_reg c=%.2zx\n", rc);
 		DEBUGP(2, dev, "<- cm4040_write (failed)\n");
 		if (rc == -ERESTARTSYS)
 			return rc;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Tsoy <[email protected]>

commit 1fc2e41f7af4572b07190f9dec28396b418e9a36 upstream.

This model is actually called 92XXM2-8 in Windows driver. But since pin configs for M22 and M28 are identical, just reuse M22 quirk.

Fixes external microphone (tested) and probably docking station ports (not tested).

---
 sound/pci/hda/patch_sigmatel.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1537,6 +1537,8 @@ static const struct snd_pci_quirk stac92
 		      "Dell Inspiron 1501", STAC_9200_DELL_M26),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f6,
 		      "unknown Dell", STAC_9200_DELL_M26),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0201,
+		      "Dell Latitude D430", STAC_9200_DELL_M22),
 	/* Panasonic */
 	SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-74", STAC_9200_PANASONIC),
 	/* Gateway machines needs EAPD to be set on resume */

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <[email protected]>

commit 478fe3037b2278d276d4cd9cd0ab06c4cb2e9b32 upstream.

memcg_propagate_slab_attrs() abuses the sysfs attribute file functions to propagate settings from the root kmem_cache to a newly created kmem_cache. It does that with:

     attr->show(root, buf);
     attr->store(new, buf, strlen(bug);

Aside of being a lazy and absurd hackery this is broken because it does not check the return value of the show() function.

Some of the show() functions return 0 w/o touching the buffer. That means in such a case the store function is called with the stale content of the previous show(). That causes nonsense like invoking kmem_cache_shrink() on a newly created kmem_cache. In the worst case it would cause handing in an uninitialized buffer.

This should be rewritten proper by adding a propagate() callback to those slub_attributes which must be propagated and avoid that insane conversion to and from ASCII, but that's too large for a hot fix.

Check at least the return value of the show() function, so calling store() with stale content is prevented.

Steven said:
"It can cause a deadlock with get_online_cpus() that has been uncovered
by recent cpu hotplug and lockdep changes that Thomas and Peter have been doing.

     Possible unsafe locking scenario:

           CPU0                    CPU1
           ----                    ----
      lock(cpu_hotplug.lock);
                                   lock(slab_mutex);
                                   lock(cpu_hotplug.lock);
      lock(slab_mutex);

     *** DEADLOCK ***"

---
 mm/slub.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -5261,6 +5261,7 @@ static void memcg_propagate_slab_attrs(s
 		char mbuf[64];
 		char *buf;
 		struct slab_attribute *attr = to_slab_attr(slab_attrs[i]);
+		ssize_t len;
 
 		if (!attr || !attr->store || !attr->show)
 			continue;

@@ -5285,8 +5286,9 @@ static void memcg_propagate_slab_attrs(s
 			buf = buffer;
 		}
 
-		attr->show(root_cache, buf);
-		attr->store(s, buf, strlen(buf));
+		len = attr->show(root_cache, buf);
+		if (len > 0)
+			attr->store(s, buf, len);
 	}
 
 	if (buffer)

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Patrik Jakobsson <[email protected]>

commit 82bc9a42cf854fdf63155759c0aa790bd1f361b0 upstream.

With LVDS we were incorrectly picking the pre-programmed mode instead of the prefered mode provided by VBT. Make sure we pick the VBT mode if one is provided. It is likely that the mode read-out code is still wrong but this patch fixes the immediate problem on most machines.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78562

---
 drivers/gpu/drm/gma500/psb_intel_lvds.c |   18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

@@ -783,20 +783,23 @@ void psb_intel_lvds_init(struct drm_devi
 		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
 			mode_dev->panel_fixed_mode =
 			    drm_mode_duplicate(dev, scan);
+			DRM_DEBUG_KMS("Using mode from DDC\n");
 			goto out;	/* FIXME: check for quirks */
 		}
 	}
 
 	/* Failed to get EDID, what about VBT? do we need this? */
-	if (mode_dev->vbt_mode)
+	if (dev_priv->lfp_lvds_vbt_mode) {
 		mode_dev->panel_fixed_mode =
-		    drm_mode_duplicate(dev, mode_dev->vbt_mode);
+			drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
 
-	if (!mode_dev->panel_fixed_mode)
-		if (dev_priv->lfp_lvds_vbt_mode)
-			mode_dev->panel_fixed_mode =
-				drm_mode_duplicate(dev,
-					dev_priv->lfp_lvds_vbt_mode);
+		if (mode_dev->panel_fixed_mode) {
+			mode_dev->panel_fixed_mode->type |=
+				DRM_MODE_TYPE_PREFERRED;
+			DRM_DEBUG_KMS("Using mode from VBT\n");
+			goto out;
+		}
+	}
 
 	/*
 	 * If we didn't get EDID, try checking if the panel is already turned

@@ -813,6 +816,7 @@ void psb_intel_lvds_init(struct drm_devi
 		if (mode_dev->panel_fixed_mode) {
 			mode_dev->panel_fixed_mode->type |=
 			    DRM_MODE_TYPE_PREFERRED;
+			DRM_DEBUG_KMS("Using pre-programmed mode\n");
 			goto out;	/* FIXME: check for quirks */
 		}
 	}

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Punit Agrawal <[email protected]>

commit 30809f559a0d348c2dfd7ab05e9a451e2384962e upstream.

On failing to migrate a page, soft_offline_huge_page() performs the necessary update to the hugepage ref-count.

But when !hugepage_migration_supported() , unmap_and_move_hugepage() also decrements the page ref-count for the hugepage. The combined behaviour leaves the ref-count in an inconsistent state.

This leads to soft lockups when running the overcommitted hugepage test from mce-tests suite.

Soft offlining pfn 0x83ed600 at process virtual address 0x400000000000 soft offline: 0x83ed600: migration failed 1, type 1fffc00000008008 (uptodate|head)

  INFO: rcu_preempt detected stalls on CPUs/tasks:
   Tasks blocked on level-0 rcu_node (CPUs 0-7): P2715
    (detected by 7, t=5254 jiffies, g=963, c=962, q=321)
    thugetlb_overco R  running task        0  2715   2685 0x00000008
    Call trace:
      dump_backtrace+0x0/0x268
      show_stack+0x24/0x30
      sched_show_task+0x134/0x180
      rcu_print_detail_task_stall_rnp+0x54/0x7c
      rcu_check_callbacks+0xa74/0xb08
      update_process_times+0x34/0x60
      tick_sched_handle.isra.7+0x38/0x70
      tick_sched_timer+0x4c/0x98
      __hrtimer_run_queues+0xc0/0x300
      hrtimer_interrupt+0xac/0x228
      arch_timer_handler_phys+0x3c/0x50
      handle_percpu_devid_irq+0x8c/0x290
      generic_handle_irq+0x34/0x50
      __handle_domain_irq+0x68/0xc0
      gic_handle_irq+0x5c/0xb0

Address this by changing the putback_active_hugepage() in soft_offline_huge_page() to putback_movable_pages().

This only triggers on systems that enable memory failure handling (ARCH_SUPPORTS_MEMORY_FAILURE) but not hugepage migration (!ARCH_ENABLE_HUGEPAGE_MIGRATION).

I imagine this wasn't triggered as there aren't many systems running this configuration.

---
 mm/memory-failure.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

@@ -1619,12 +1619,8 @@ static int soft_offline_huge_page(struct
 	if (ret) {
 		pr_info("soft offline: %#lx: migration failed %d, type %lx\n",
 			pfn, ret, page->flags);
-		/*
-		 * We know that soft_offline_huge_page() tries to migrate
-		 * only one hugepage pointed to by hpage, so we need not
-		 * run through the pagelist here.
-		 */
-		putback_active_hugepage(hpage);
+		if (!list_empty(&pagelist))
+			putback_movable_pages(&pagelist);
 		if (ret > 0)
 			ret = -EIO;
 	} else {

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yisheng Xie <[email protected]>

commit 70feee0e1ef331b22cc51f383d532a0d043fbdcc upstream.

Kefeng reported that when running the follow test, the mlock count in meminfo will increase permanently:

[1] testcase
linux:~ # cat test_mlockal
grep Mlocked /proc/meminfo
for j in seq 0 10
do
for i in seq 4 15
do
./p_mlockall >> log &
done
sleep 0.2
done

 # wait some time to let mlock counter decrease and 5s may not enough
 sleep 5
 grep Mlocked /proc/meminfo

linux:~ # cat p_mlockall.c
#include <sys/mman.h>
#include <stdlib.h>
#include <stdio.h>

#define SPACE_LEN 4096

int main(int argc, char ** argv)

 {
	 	int ret;
	 	void *adr = malloc(SPACE_LEN);
	 	if (!adr)
	 		return -1;

	 	ret = mlockall(MCL_CURRENT | MCL_FUTURE);
	 	printf("mlcokall ret = %d\n", ret);

	 	ret = munlockall();
	 	printf("munlcokall ret = %d\n", ret);

	 	free(adr);
	 	return 0;
	 }

In __munlock_pagevec() we should decrement NR_MLOCK for each page where we clear the PageMlocked flag. Commit 1ebb7cc6a583 ("mm: munlock: batch NR_MLOCK zone state updates") has introduced a bug where we don't decrement NR_MLOCK for pages where we clear the flag, but fail to isolate them from the lru list (e.g. when the pages are on some other cpu's percpu pagevec). Since PageMlocked stays cleared, the NR_MLOCK accounting gets permanently disrupted by this.

Fix it by counting the number of page whose PageMlock flag is cleared.

---
 mm/mlock.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

@@ -277,7 +277,7 @@ static void __munlock_pagevec(struct pag
 {
 	int i;
 	int nr = pagevec_count(pvec);
-	int delta_munlocked;
+	int delta_munlocked = -nr;
 	struct pagevec pvec_putback;
 	int pgrescued = 0;
 

@@ -297,6 +297,8 @@ static void __munlock_pagevec(struct pag
 				continue;
 			else
 				__munlock_isolation_failed(page);
+		} else {
+			delta_munlocked++;
 		}
 
 		/*

@@ -308,7 +310,6 @@ static void __munlock_pagevec(struct pag
 		pagevec_add(&pvec_putback, pvec->pages[i]);
 		pvec->pages[i] = NULL;
 	}
-	delta_munlocked = -nr + pagevec_count(&pvec_putback);
 	__mod_zone_page_state(zone, NR_MLOCK, delta_munlocked);
 	spin_unlock_irq(&zone->lru_lock);
 

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Imre Deak <[email protected]>

commit 4d071c3238987325b9e50e33051a40d1cce311cc upstream.

Some drivers - like i915 - may not support the system suspend direct complete optimization due to differences in their runtime and system suspend sequence. Add a flag that when set resumes the device before calling the driver's system suspend handlers which effectively disables the optimization.

Needed by a future patch fixing suspend/resume on i915.

Suggested by Rafael.

---
 drivers/pci/pci.c   |    3 ++-
 include/linux/pci.h |    5 +++++
 2 files changed, 7 insertions(+), 1 deletion(-)

@@ -2079,7 +2079,8 @@ bool pci_dev_keep_suspended(struct pci_d
 
 	if (!pm_runtime_suspended(dev)
 	    || pci_target_state(pci_dev) != pci_dev->current_state
-	    || platform_pci_need_resume(pci_dev))
+	    || platform_pci_need_resume(pci_dev)
+	    || (pci_dev->dev_flags & PCI_DEV_FLAGS_NEEDS_RESUME))
 		return false;
 
 	/*

@@ -182,6 +182,11 @@ enum pci_dev_flags {
 	PCI_DEV_FLAGS_NO_PM_RESET = (__force pci_dev_flags_t) (1 << 7),
 	/* Get VPD from function 0 VPD */
 	PCI_DEV_FLAGS_VPD_REF_F0 = (__force pci_dev_flags_t) (1 << 8),
+	/*
+	 * Resume before calling the driver's system suspend hooks, disabling
+	 * the direct_complete optimization.
+	 */
+	PCI_DEV_FLAGS_NEEDS_RESUME = (__force pci_dev_flags_t) (1 << 11),
 };
 
 enum pci_irq_reroute_variant {

The patch for i915 isn't in this series, or even in mainline yet, so I don't think this belongs in stable yet. Also, based on the commit message (commit adfdf85d795f "drm/i915: Prevent the system suspend complete optimization") it appears that only 4.8 and later are affected by the bug.

Ben.

Ben Hutchings
Software Developer, Codethink Ltd.

Thanks for digging into this, I was kind of curious about it, but I thought it was fixing an old issue. I've now dropped this from all stable queues.

greg k-h

4d071c3 and adfdf85 were pushed to separate trees (pci and drm) and the corresponding drm pull request from Dave will only be sent to Linus by this Sunday.

Yes, the fix is needed for v4.8, I forgot to add the tag for this to 4d071c3 and added the wrong 4.10 tag to adfdf85 (in confusion thinking that I need to care only about stable releases and not longterm ones as shown at https://www.kernel.org) :/

I'll resend the two patches with the correct tags once both patches are in Linus' tree.

--Imre

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jan Kara <[email protected]>

commit 5375023ae1266553a7baa0845e82917d8803f48c upstream.

XFS SEEK_HOLE implementation could miss a hole in an unwritten extent as can be seen by the following command:

xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "pwrite 128k 8k"

       -c "seek -h 0" file

wrote 57344/57344 bytes at offset 0
56 KiB, 14 ops; 0.0000 sec (49.312 MiB/sec and 12623.9856 ops/sec) wrote 8192/8192 bytes at offset 131072
8 KiB, 2 ops; 0.0000 sec (70.383 MiB/sec and 18018.0180 ops/sec)
Whence Result
HOLE 139264

Where we can see that hole at offset 56k was just ignored by SEEK_HOLE implementation. The bug is in xfs_find_get_desired_pgoff() which does not properly detect the case when pages are not contiguous.

Fix the problem by properly detecting when found page has larger offset than expected.

---
 fs/xfs/xfs_file.c |   29 +++++++++--------------------
 1 file changed, 9 insertions(+), 20 deletions(-)

@@ -1235,17 +1235,6 @@ xfs_find_get_desired_pgoff(
 			break;
 		}
 
-		/*
-		 * At lease we found one page.  If this is the first time we
-		 * step into the loop, and if the first page index offset is
-		 * greater than the given search offset, a hole was found.
-		 */
-		if (type == HOLE_OFF && lastoff == startoff &&
-		    lastoff < page_offset(pvec.pages[0])) {
-			found = true;
-			break;
-		}
-
 		for (i = 0; i < nr_pages; i++) {
 			struct page	*page = pvec.pages[i];
 			loff_t		b_offset;

@@ -1257,18 +1246,18 @@ xfs_find_get_desired_pgoff(
 			 * file mapping. However, page->index will not change
 			 * because we have a reference on the page.
 			 *
-			 * Searching done if the page index is out of range.
-			 * If the current offset is not reaches the end of
-			 * the specified search range, there should be a hole
-			 * between them.
+			 * If current page offset is beyond where we've ended,
+			 * we've found a hole.
 			 */
-			if (page->index > end) {
-				if (type == HOLE_OFF && lastoff < endoff) {
-					*offset = lastoff;
-					found = true;
-				}
+			if (type == HOLE_OFF && lastoff < endoff &&
+			    lastoff < page_offset(pvec.pages[i])) {
+				found = true;
+				*offset = lastoff;
 				goto out;
 			}
+			/* Searching done if the page index is out of range. */
+			if (page->index > end)
+				goto out;
 
 			lock_page(page);
 			/*

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eryu Guan <[email protected]>

commit 8affebe16d79ebefb1d9d6d56a46dc89716f9453 upstream.

xfs_find_get_desired_pgoff() is used to search for offset of hole or data in page range [index, end] (both inclusive), and the max number of pages to search should be at least one, if end == index. Otherwise the only page is missed and no hole or data is found, which is not correct.

When block size is smaller than page size, this can be demonstrated by preallocating a file with size smaller than page size and writing data to the last block. E.g. run this xfs_io command on a 1k block size XFS on x86_64 host.

  # xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \
  	    -c "seek -d 0" /mnt/xfs/testfile
  wrote 1024/1024 bytes at offset 2048
  1 KiB, 1 ops; 0.0000 sec (33.675 MiB/sec and 34482.7586 ops/sec)
  Whence  Result
  DATA    EOF

Data at offset 2k was missed, and lseek(2) returned ENXIO.

This is uncovered by generic/285 subtest 07 and 08 on ppc64 host, where pagesize is 64k. Because a recent change to generic/285 reduced the preallocated file size to smaller than 64k.

---
 fs/xfs/xfs_file.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1208,7 +1208,7 @@ xfs_find_get_desired_pgoff(
 		unsigned	nr_pages;
 		unsigned int	i;
 
-		want = min_t(pgoff_t, end - index, PAGEVEC_SIZE);
+		want = min_t(pgoff_t, end - index, PAGEVEC_SIZE - 1) + 1;
 		nr_pages = pagevec_lookup(&pvec, inode->i_mapping, index,
 					  want);
 		/*

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Darrick J. Wong <[email protected]>

commit be6324c00c4d1e0e665f03ed1fc18863a88da119 upstream.

In xfs_ioc_getbmap, we should only copy the fields of struct getbmap from userspace, or else we end up copying random stack contents into the kernel. struct getbmap is a strict subset of getbmapx, so a partial structure copy should work fine.

---
 fs/xfs/xfs_ioctl.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

@@ -1379,10 +1379,11 @@ xfs_ioc_getbmap(
 	unsigned int		cmd,
 	void			__user *arg)
 {
-	struct getbmapx		bmx;
+	struct getbmapx		bmx = { 0 };
 	int			error;
 
-	if (copy_from_user(&bmx, arg, sizeof(struct getbmapx)))
+	/* struct getbmap is a strict subset of struct getbmapx. */
+	if (copy_from_user(&bmx, arg, offsetof(struct getbmapx, bmv_iflags)))
 		return -EFAULT;
 
 	if (bmx.bmv_count < 2)

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Sandeen <[email protected]>

commit 023cc840b40fad95c6fe26fff1d380a8c9d45939 upstream.

Carlos had a case where "find" seemed to start spinning forever and never return.

This was on a filesystem with non-default multi-fsb (8k) directory blocks, and a fragmented directory with extents like this:

0:[0,133646,2,0]
1:[2,195888,1,0]
2:[3,195890,1,0]
3:[4,195892,1,0]
4:[5,195894,1,0]
5:[6,195896,1,0]
6:[7,195898,1,0]
7:[8,195900,1,0]
8:[9,195902,1,0]
9:[10,195908,1,0]
10:[11,195910,1,0]
11:[12,195912,1,0]
12:[13,195914,1,0]
...

i.e. the first extent is a contiguous 2-fsb dir block, but after that it is fragmented into 1 block extents.

At the top of the readdir path, we allocate a mapping array which (for this filesystem geometry) can hold 10 extents; see the assignment to map_info->map_size. During readdir, we are therefore able to map extents 0 through 9 above into the array for readahead purposes. If we count by 2, we see that the last mapped index (9) is the first block of a 2-fsb directory block.

At the end of xfs_dir2_leaf_readbuf() we have 2 loops to fill more readahead; the outer loop assumes one full dir block is processed each loop iteration, and an inner loop that ensures that this is so by advancing to the next extent until a full directory block is mapped.

The problem is that this inner loop may step past the last extent in the mapping array as it tries to reach the end of the directory block. This will read garbage for the extent length, and as a result the loop control variable 'j' may become corrupted and never fail the loop conditional.

The number of valid mappings we have in our array is stored in map->map_valid, so stop this inner loop based on that limit.

There is an ASSERT at the top of the outer loop for this same condition, but we never made it out of the inner loop, so the ASSERT never fired.

Huge appreciation for Carlos for debugging and isolating the problem.

---
 fs/xfs/xfs_dir2_readdir.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

@@ -406,6 +406,7 @@ xfs_dir2_leaf_readbuf(
 
 	/*
 	 * Do we need more readahead?
+	 * Each loop tries to process 1 full dir blk; last may be partial.
 	 */
 	blk_start_plug(&plug);
 	for (mip->ra_index = mip->ra_offset = i = 0;

@@ -437,9 +438,14 @@ xfs_dir2_leaf_readbuf(
 		}
 
 		/*
-		 * Advance offset through the mapping table.
+		 * Advance offset through the mapping table, processing a full
+		 * dir block even if it is fragmented into several extents.
+		 * But stop if we have consumed all valid mappings, even if
+		 * it's not yet a full directory block.
 		 */
-		for (j = 0; j < geo->fsbcount; j += length ) {
+		for (j = 0;
+		     j < geo->fsbcount && mip->ra_index < mip->map_valid;
+		     j += length ) {
 			/*
 			 * The rest of this extent but not more than a dir
 			 * block.

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Brian Foster <[email protected]>

commit cb52ee334a45ae6c78a3999e4b473c43ddc528f4 upstream.

Directory block readahead uses a complex iteration mechanism to map between high-level directory blocks and underlying physical extents. This mechanism attempts to traverse the higher-level dir blocks in a manner that handles multi-fsb directory blocks and simultaneously maintains a reference to the corresponding physical blocks.

This logic doesn't handle certain (discontiguous) physical extent layouts correctly with multi-fsb directory blocks. For example, consider the case of a 4k FSB filesystem with a 2 FSB (8k) directory block size and a directory with the following extent layout:

 EXT: FILE-OFFSET      BLOCK-RANGE      AG AG-OFFSET        TOTAL
   0: [0..7]:          88..95            0 (88..95)             8
   1: [8..15]:         80..87            0 (80..87)             8
   2: [16..39]:        168..191          0 (168..191)          24
   3: [40..63]:        5242952..5242975  1 (72..95)            24

Directory block 0 spans physical extents 0 and 1, dirblk 1 lies entirely within extent 2 and dirblk 2 spans extents 2 and 3. Because extent 2 is larger than the directory block size, the readahead code erroneously assumes the block is contiguous and issues a readahead based on the physical mapping of the first fsb of the dirblk. This results in read verifier failure and a spurious corruption or crc failure, depending on the filesystem format.

Further, the subsequent readahead code responsible for walking through the physical table doesn't correctly advance the physical block reference for dirblk 2. Instead of advancing two physical filesystem blocks, the first iteration of the loop advances 1 block (correctly), but the subsequent iteration advances 2 more physical blocks because the next physical extent (extent 3, above) happens to cover more than dirblk 2. At this point, the higher-level directory block walking is completely off the rails of the actual physical layout of the directory for the respective mapping table.

Update the contiguous dirblock logic to consider the current offset in the physical extent to avoid issuing directory readahead to unrelated blocks. Also, update the mapping table advancing code to consider the current offset within the current dirblock to avoid advancing the mapping reference too far beyond the dirblock.

---
 fs/xfs/xfs_dir2_readdir.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

@@ -417,7 +417,8 @@ xfs_dir2_leaf_readbuf(
 		 * Read-ahead a contiguous directory block.
 		 */
 		if (i > mip->ra_current &&
-		    map[mip->ra_index].br_blockcount >= geo->fsbcount) {
+		    (map[mip->ra_index].br_blockcount - mip->ra_offset) >=
+		    geo->fsbcount) {
 			xfs_dir3_data_readahead(dp,
 				map[mip->ra_index].br_startoff + mip->ra_offset,
 				XFS_FSB_TO_DADDR(dp->i_mount,

@@ -450,7 +451,7 @@ xfs_dir2_leaf_readbuf(
 			 * The rest of this extent but not more than a dir
 			 * block.
 			 */
-			length = min_t(int, geo->fsbcount,
+			length = min_t(int, geo->fsbcount - j,
 					map[mip->ra_index].br_blockcount -
 							mip->ra_offset);
 			mip->ra_offset += length;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Brian Foster <[email protected]>

commit 20e8a063786050083fe05b4f45be338c60b49126 upstream.

The quotacheck error handling of the delwri buffer list assumes the resident buffers are locked and doesn't clear the _XBF_DELWRI_Q flag on the buffers that are dequeued. This can lead to assert failures on buffer release and possibly other locking problems.

Move this code to a delwri queue cancel helper function to encapsulate the logic required to properly release buffers from a delwri queue. Update the helper to clear the delwri queue flag and call it from quotacheck.

---
 fs/xfs/xfs_buf.c |   24 ++++++++++++++++++++++++
 fs/xfs/xfs_buf.h |    1 +
 fs/xfs/xfs_qm.c  |    7 +------
 3 files changed, 26 insertions(+), 6 deletions(-)

@@ -979,6 +979,8 @@ void
 xfs_buf_unlock(
 	struct xfs_buf		*bp)
 {
+	ASSERT(xfs_buf_islocked(bp));
+
 	XB_CLEAR_OWNER(bp);
 	up(&bp->b_sema);
 

@@ -1713,6 +1715,28 @@ error:
 }
 
 /*
+ * Cancel a delayed write list.
+ *
+ * Remove each buffer from the list, clear the delwri queue flag and drop the
+ * associated buffer reference.
+ */
+void
+xfs_buf_delwri_cancel(
+	struct list_head	*list)
+{
+	struct xfs_buf		*bp;
+
+	while (!list_empty(list)) {
+		bp = list_first_entry(list, struct xfs_buf, b_list);
+
+		xfs_buf_lock(bp);
+		bp->b_flags &= ~_XBF_DELWRI_Q;
+		list_del_init(&bp->b_list);
+		xfs_buf_relse(bp);
+	}
+}
+
+/*
  * Add a buffer to the delayed write list.
  *
  * This queues a buffer for writeout if it hasn't already been.  Note that

@@ -304,6 +304,7 @@ extern void xfs_buf_iomove(xfs_buf_t *,
 extern void *xfs_buf_offset(struct xfs_buf *, size_t);
 
 /* Delayed Write Buffer Routines */
+extern void xfs_buf_delwri_cancel(struct list_head *);
 extern bool xfs_buf_delwri_queue(struct xfs_buf *, struct list_head *);
 extern int xfs_buf_delwri_submit(struct list_head *);
 extern int xfs_buf_delwri_submit_nowait(struct list_head *);

@@ -1355,12 +1355,7 @@ xfs_qm_quotacheck(
 	mp->m_qflags |= flags;
 
  error_return:
-	while (!list_empty(&buffer_list)) {
-		struct xfs_buf *bp =
-			list_first_entry(&buffer_list, struct xfs_buf, b_list);
-		list_del_init(&bp->b_list);
-		xfs_buf_relse(bp);
-	}
+	xfs_buf_delwri_cancel(&buffer_list);
 
 	if (error) {
 		xfs_warn(mp,

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Brian Foster <[email protected]>

commit 756baca27fff3ecaeab9dbc7a5ee35a1d7bc0c7f upstream.

Inodes that are inserted into the perag tree but still under construction are flagged with the XFS_INEW bit. Most contexts either skip such inodes when they are encountered or have the ability to handle them.

The runtime quotaoff sequence introduces a context that must wait for construction of such inodes to correctly ensure that all dquots in the fs are released. In anticipation of this, support the ability to wait on new inodes. Wake the appropriate bit when XFS_INEW is cleared.

---
 fs/xfs/xfs_icache.c |    5 ++++-
 fs/xfs/xfs_inode.h  |    4 +++-
 2 files changed, 7 insertions(+), 2 deletions(-)

@@ -210,14 +210,17 @@ xfs_iget_cache_hit(
 
 		error = inode_init_always(mp->m_super, inode);
 		if (error) {
+			bool wake;
 			/*
 			 * Re-initializing the inode failed, and we are in deep
 			 * trouble.  Try to re-add it to the reclaim list.
 			 */
 			rcu_read_lock();
 			spin_lock(&ip->i_flags_lock);
-
+			wake = !!__xfs_iflags_test(ip, XFS_INEW);
 			ip->i_flags &= ~(XFS_INEW | XFS_IRECLAIM);
+			if (wake)
+				wake_up_bit(&ip->i_flags, __XFS_INEW_BIT);
 			ASSERT(ip->i_flags & XFS_IRECLAIMABLE);
 			trace_xfs_iget_reclaim_fail(ip);
 			goto out_error;

@@ -208,7 +208,8 @@ xfs_get_initial_prid(struct xfs_inode *d
 #define XFS_IRECLAIM		(1 << 0) /* started reclaiming this inode */
 #define XFS_ISTALE		(1 << 1) /* inode has been staled */
 #define XFS_IRECLAIMABLE	(1 << 2) /* inode can be reclaimed */
-#define XFS_INEW		(1 << 3) /* inode has just been allocated */
+#define __XFS_INEW_BIT		3	 /* inode has just been allocated */
+#define XFS_INEW		(1 << __XFS_INEW_BIT)
 #define XFS_ITRUNCATED		(1 << 5) /* truncated down so flush-on-close */
 #define XFS_IDIRTY_RELEASE	(1 << 6) /* dirty release already seen */
 #define __XFS_IFLOCK_BIT	7	 /* inode is being flushed right now */

@@ -453,6 +454,7 @@ static inline void xfs_finish_inode_setu
 	xfs_iflags_clear(ip, XFS_INEW);
 	barrier();
 	unlock_new_inode(VFS_I(ip));
+	wake_up_bit(&ip->i_flags, __XFS_INEW_BIT);
 }
 
 static inline void xfs_setup_existing_inode(struct xfs_inode *ip)

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Brian Foster <[email protected]>

commit ae2c4ac2dd39b23a87ddb14ceddc3f2872c6aef5 upstream.

The AG inode iterator currently skips new inodes as such inodes are inserted into the inode radix tree before they are fully constructed. Certain contexts require the ability to wait on the construction of new inodes, however. The fs-wide dquot release from the quotaoff sequence is an example of this.

Update the AG inode iterator to support the ability to wait on inodes flagged with XFS_INEW upon request. Create a new xfs_inode_ag_iterator_flags() interface and support a set of iteration flags to modify the iteration behavior. When the XFS_AGITER_INEW_WAIT flag is set, include XFS_INEW flags in the radix tree inode lookup and wait on them before the callback is executed.

---
 fs/xfs/xfs_icache.c |   53 ++++++++++++++++++++++++++++++++++++++++++++--------
 fs/xfs/xfs_icache.h |    8 +++++++
 2 files changed, 53 insertions(+), 8 deletions(-)

@@ -366,6 +366,22 @@ out_destroy:
 	return error;
 }
 
+static void
+xfs_inew_wait(
+	struct xfs_inode	*ip)
+{
+	wait_queue_head_t *wq = bit_waitqueue(&ip->i_flags, __XFS_INEW_BIT);
+	DEFINE_WAIT_BIT(wait, &ip->i_flags, __XFS_INEW_BIT);
+
+	do {
+		prepare_to_wait(wq, &wait.wait, TASK_UNINTERRUPTIBLE);
+		if (!xfs_iflags_test(ip, XFS_INEW))
+			break;
+		schedule();
+	} while (true);
+	finish_wait(wq, &wait.wait);
+}
+
 /*
  * Look up an inode by number in the given file system.
  * The inode is looked up in the cache held in each AG.

@@ -470,9 +486,11 @@ out_error_or_again:
 
 STATIC int
 xfs_inode_ag_walk_grab(
-	struct xfs_inode	*ip)
+	struct xfs_inode	*ip,
+	int			flags)
 {
 	struct inode		*inode = VFS_I(ip);
+	bool			newinos = !!(flags & XFS_AGITER_INEW_WAIT);
 
 	ASSERT(rcu_read_lock_held());
 

@@ -490,7 +508,8 @@ xfs_inode_ag_walk_grab(
 		goto out_unlock_noent;
 
 	/* avoid new or reclaimable inodes. Leave for reclaim code to flush */
-	if (__xfs_iflags_test(ip, XFS_INEW | XFS_IRECLAIMABLE | XFS_IRECLAIM))
+	if ((!newinos && __xfs_iflags_test(ip, XFS_INEW)) ||
+	    __xfs_iflags_test(ip, XFS_IRECLAIMABLE | XFS_IRECLAIM))
 		goto out_unlock_noent;
 	spin_unlock(&ip->i_flags_lock);
 

@@ -518,7 +537,8 @@ xfs_inode_ag_walk(
 					   void *args),
 	int			flags,
 	void			*args,
-	int			tag)
+	int			tag,
+	int			iter_flags)
 {
 	uint32_t		first_index;
 	int			last_error = 0;

@@ -560,7 +580,7 @@ restart:
 		for (i = 0; i < nr_found; i++) {
 			struct xfs_inode *ip = batch[i];
 
-			if (done || xfs_inode_ag_walk_grab(ip))
+			if (done || xfs_inode_ag_walk_grab(ip, iter_flags))
 				batch[i] = NULL;
 
 			/*

@@ -588,6 +608,9 @@ restart:
 		for (i = 0; i < nr_found; i++) {
 			if (!batch[i])
 				continue;
+			if ((iter_flags & XFS_AGITER_INEW_WAIT) &&
+			    xfs_iflags_test(batch[i], XFS_INEW))
+				xfs_inew_wait(batch[i]);
 			error = execute(batch[i], flags, args);
 			IRELE(batch[i]);
 			if (error == -EAGAIN) {

@@ -640,12 +663,13 @@ xfs_eofblocks_worker(
 }
 
 int
-xfs_inode_ag_iterator(
+xfs_inode_ag_iterator_flags(
 	struct xfs_mount	*mp,
 	int			(*execute)(struct xfs_inode *ip, int flags,
 					   void *args),
 	int			flags,
-	void			*args)
+	void			*args,
+	int			iter_flags)
 {
 	struct xfs_perag	*pag;
 	int			error = 0;

@@ -655,7 +679,8 @@ xfs_inode_ag_iterator(
 	ag = 0;
 	while ((pag = xfs_perag_get(mp, ag))) {
 		ag = pag->pag_agno + 1;
-		error = xfs_inode_ag_walk(mp, pag, execute, flags, args, -1);
+		error = xfs_inode_ag_walk(mp, pag, execute, flags, args, -1,
+					  iter_flags);
 		xfs_perag_put(pag);
 		if (error) {
 			last_error = error;

@@ -667,6 +692,17 @@ xfs_inode_ag_iterator(
 }
 
 int
+xfs_inode_ag_iterator(
+	struct xfs_mount	*mp,
+	int			(*execute)(struct xfs_inode *ip, int flags,
+					   void *args),
+	int			flags,
+	void			*args)
+{
+	return xfs_inode_ag_iterator_flags(mp, execute, flags, args, 0);
+}
+
+int
 xfs_inode_ag_iterator_tag(
 	struct xfs_mount	*mp,
 	int			(*execute)(struct xfs_inode *ip, int flags,

@@ -683,7 +719,8 @@ xfs_inode_ag_iterator_tag(
 	ag = 0;
 	while ((pag = xfs_perag_get_tag(mp, ag, tag))) {
 		ag = pag->pag_agno + 1;
-		error = xfs_inode_ag_walk(mp, pag, execute, flags, args, tag);
+		error = xfs_inode_ag_walk(mp, pag, execute, flags, args, tag,
+					  0);
 		xfs_perag_put(pag);
 		if (error) {
 			last_error = error;

@@ -48,6 +48,11 @@ struct xfs_eofblocks {
 #define XFS_IGET_UNTRUSTED	0x2
 #define XFS_IGET_DONTCACHE	0x4
 
+/*
+ * flags for AG inode iterator
+ */
+#define XFS_AGITER_INEW_WAIT	0x1	/* wait on new inodes */
+
 int xfs_iget(struct xfs_mount *mp, struct xfs_trans *tp, xfs_ino_t ino,
 	     uint flags, uint lock_flags, xfs_inode_t **ipp);
 

@@ -72,6 +77,9 @@ void xfs_eofblocks_worker(struct work_st
 int xfs_inode_ag_iterator(struct xfs_mount *mp,
 	int (*execute)(struct xfs_inode *ip, int flags, void *args),
 	int flags, void *args);
+int xfs_inode_ag_iterator_flags(struct xfs_mount *mp,
+	int (*execute)(struct xfs_inode *ip, int flags, void *args),
+	int flags, void *args, int iter_flags);
 int xfs_inode_ag_iterator_tag(struct xfs_mount *mp,
 	int (*execute)(struct xfs_inode *ip, int flags, void *args),
 	int flags, void *args, int tag);

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Brian Foster <[email protected]>

commit e20c8a517f259cb4d258e10b0cd5d4b30d4167a0 upstream.

The quotaoff operation has a race with inode allocation that results in a livelock. An inode allocation that occurs before the quota status flags are updated acquires the appropriate dquots for the inode via xfs_qm_vop_dqalloc(). It then inserts the XFS_INEW inode into the perag radix tree, sometime later attaches the dquots to the inode and finally clears the XFS_INEW flag. Quotaoff expects to release the dquots from all inodes in the filesystem via xfs_qm_dqrele_all_inodes(). This invokes the AG inode iterator, which skips inodes in the XFS_INEW state because they are not fully constructed. If the scan occurs after dquots have been attached to an inode, but before XFS_INEW is cleared, the newly allocated inode will continue to hold a reference to the applicable dquots. When quotaoff invokes xfs_qm_dqpurge_all(), the reference count of those dquot(s) remain elevated and the dqpurge scan spins indefinitely.

To address this problem, update the xfs_qm_dqrele_all_inodes() scan to wait on inodes marked on the XFS_INEW state. We wait on the inodes explicitly rather than skip and retry to avoid continuous retry loops due to a parallel inode allocation workload. Since quotaoff updates the quota state flags and uses a synchronous transaction before the dqrele scan, and dquots are attached to inodes after radix tree insertion iff quota is enabled, one INEW waiting pass through the AG guarantees that the scan has processed all inodes that could possibly hold dquot references.

---
 fs/xfs/xfs_qm_syscalls.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -764,5 +764,6 @@ xfs_qm_dqrele_all_inodes(
 	uint		 flags)
 {
 	ASSERT(mp->m_quotainfo);
-	xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, NULL);
+	xfs_inode_ag_iterator_flags(mp, xfs_dqrele_inode, flags, NULL,
+				    XFS_AGITER_INEW_WAIT);
 }