ARM: dts: bonegreen-wireless: add WL1835 Bluetooth device node
PATCH 1/1 ARM: dts: bonegreen-wireless: add WL1835 Bluetooth device node
This adds the serial slave device for the WL1835 Bluetooth interface.
Signed-off-by Robert Nelson <[email protected]>
CC Ricardo Salveti <[email protected]>
CC Tony Lindgren <[email protected]>
CC Jason Kridner <[email protected]>
--- arch/arm/boot/dts/am335x-bonegreen-wireless.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/boot/dts/am335x-bonegreen-wireless.dts +5 -0
@@ -97,6 +97,11 @@ pinctrl-names = "default"; pinctrl-0 = <&uart3_pins &bt_pins>; status = "okay"; + + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + }; }; &gpio1 {
Signature · 1 line
2.11.0
PATCH 1/1 ARM: dts: bonegreen-wireless: add WL1835 Bluetooth device node
Sorry, Tony, i had forgotten to include the subject in the first ARM:
dts: bonegreen-wireless: add WL1835 Bluetooth device node patch
Regards,
Quoted 29 lines · Robert Nelson
This adds the serial slave device for the WL1835 Bluetooth interface.
Signed-off-by Robert Nelson <[email protected]>CC Ricardo Salveti <[email protected]>CC Tony Lindgren <[email protected]>CC Jason Kridner <[email protected]>--- arch/arm/boot/dts/am335x-bonegreen-wireless.dts | 5 +++++ 1 file changed, 5 insertions(+)arch/arm/boot/dts/am335x-bonegreen-wireless.dts +5
-1@@ -97,6 +97,11 @@ pinctrl-names = "default"; pinctrl-0 = <&uart3_pins &bt_pins>; status = "okay"; + + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + }; }; &gpio1 { --2.11.0
Signature · 2 lines
Robert Nelson https://rcn-ee.com/
PATCH 1/1 ARM: dts: bonegreen-wireless: add WL1835 Bluetooth device node
In reply to Robert NelsonQuoted 1 line · Robert Nelson
This adds the serial slave device for the WL1835 Bluetooth interface.
Applying into omap-for-v4.13/dt thanks.
Tony