Skip to contentSkip to conversation

package/beecrypt: needs host gcc >= 4.8 for icu support

PATCH New Bernd Kuhls 2 participants 2 messages Jun 10, 2017

lore
Share & tools
lore

Bernd Kuhls

author
#0 lore raw

PATCH 1/4 package/beecrypt: needs host gcc >= 4.8 for icu support

Signed-off-by Bernd Kuhls <[email protected]>
---
 package/beecrypt/Config.in | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
package/beecrypt/Config.in +4 -2
index a007c36a6..885451510 100644
@@ -13,6 +13,7 @@ if BR2_PACKAGE_BEECRYPT
 
 config BR2_PACKAGE_BEECRYPT_CPP
 	bool "C++ support"
+	depends on BR2_HOST_GCC_AT_LEAST_4_8 # icu
 	depends on BR2_INSTALL_LIBSTDCPP
 	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 # icu
 	depends on BR2_USE_WCHAR # icu

@@ -22,9 +23,10 @@ config BR2_PACKAGE_BEECRYPT_CPP
 	help
 	  Enable C++ support. This pulls in the (large) icu package.
 
-comment "C++ support needs a toolchain w/ C++, wchar, dynamic libraries, gcc >= 4.8"
+comment "C++ support needs a toolchain w/ C++, wchar, dynamic libraries, gcc >= 4.8, host gcc >= 4.8"
 	depends on !BR2_BINFMT_FLAT
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR \
-		|| BR2_STATIC_LIBS || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_8
+		|| BR2_STATIC_LIBS || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 \
+		|| !BR2_HOST_GCC_AT_LEAST_4_8
 
 endif # BR2_PACKAGE_BEECRYPT
Signature · 1 line
2.11.0
#1 lore raw

PATCH 1/4 package/beecrypt: needs host gcc >= 4.8 for icu support

Hello,

Quoted 4 lines · Bernd Kuhls
Signed-off-by Bernd Kuhls <[email protected]>
---
 package/beecrypt/Config.in | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

Series applied, thanks. However, it is worth mentioning that the series doesn't appear properly threaded. Did you use git send-email to send the whole series at once?

Best regards,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com