4.4.72-stable review
Subsystems (2)
Greg Kroah-Hartman
maintainercover 4.4.72-stable review
This is the start of the stable review cycle for the 4.4.72 release. There are 90 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed Jun 14 15:25:30 UTC 2017. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.72-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.72-rc1
Mark Rutland <[email protected]>
arm64: ensure extension of smp_store_release value
Mark Rutland <[email protected]>
arm64: armv8_deprecated: ensure extension of addr
Kees Cook <[email protected]>
usercopy: Adjust tests to deal with SMAP/PAN
Amey Telawane <[email protected]>
tracing: Use strlcpy() instead of strcpy() in __trace_find_cmdline()
Mike Marciniszyn <[email protected]>
RDMA/qib,hfi1: Fix MR reference count leak on write with immediate
Kristina Martsenko <[email protected]>
arm64: entry: improve data abort handling of tagged pointers
Kristina Martsenko <[email protected]>
arm64: hw_breakpoint: fix watchpoint matching for tagged pointers
Artem Savkov <[email protected]>
Make __xfs_xattr_put_listen preperly report errors.
Trond Myklebust <[email protected]>
NFSv4: Don't perform cached access checks before we've OPENed the file
Trond Myklebust <[email protected]>
NFS: Ensure we revalidate attributes before using execute_ok()
Michal Hocko <[email protected]>
mm: consider memblock reservations for deferred memory initialization sizing
Eric Dumazet <[email protected]>
net: better skb->sender_cpu and skb->napi_id cohabitation
Takatoshi Akiyama <[email protected]>
serial: sh-sci: Fix panic when serial console and DMA are enabled
Peter Hurley <[email protected]>
tty: Drop krefs for interrupted tty lock
Julius Werner <[email protected]>
drivers: char: mem: Fix wraparound check to allow mappings up to the end
Takashi Iwai <[email protected]>
ASoC: Fix use-after-free at card unregistration
Takashi Iwai <[email protected]>
ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT
Takashi Iwai <[email protected]>
ALSA: timer: Fix race between read and ioctl
Ben Skeggs <[email protected]>
drm/nouveau/tmr: fully separate alarm execution/pending lists
Sinclair Yeh <[email protected]>
drm/vmwgfx: Make sure backup_handle is always valid
Vladis Dronov <[email protected]>
drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()
Dan Carpenter <[email protected]>
drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()
Jin Yao <[email protected]>
perf/core: Drop kernel samples even though :u is specified
Michael Bringmann <[email protected]>
powerpc/hotplug-mem: Fix missing endian conversion of aa_index
Michael Ellerman <[email protected]>
powerpc/numa: Fix percpu allocations to be NUMA aware
Russell Currey <[email protected]>
powerpc/eeh: Avoid use after free in eeh_handle_special_event()
Johannes Thumshirn <[email protected]>
scsi: qla2xxx: don't disable a not previously enabled PCI device
Marc Zyngier <[email protected]>
KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pages
Jeff Mahoney <[email protected]>
btrfs: fix memory leak in update_space_info failure path
David Sterba <[email protected]>
btrfs: use correct types for page indices in btrfs_page_exists_in_range
Frederic Barrat <[email protected]>
cxl: Fix error path on bad ioctl
Al Viro <[email protected]>
ufs_getfrag_block(): we only grab ->truncate_mutex on block creation path
Al Viro <[email protected]>
ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments()
Al Viro <[email protected]>
ufs: set correct ->s_maxsize
Al Viro <[email protected]>
ufs: restore maintaining ->i_blocks
Al Viro <[email protected]>
fix ufs_isblockset()
Al Viro <[email protected]>
ufs: restore proper tail allocation
Fabian Frederick <[email protected]>
fs: add i_blocksize()
Tejun Heo <[email protected]>
cpuset: consider dying css as offline
Ulrik De Bie <[email protected]>
Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled
Eric Anholt <[email protected]>
drm/msm: Expose our reservation object when exporting a dmabuf.
Nicholas Bellinger <[email protected]>
target: Re-add check to reject control WRITEs with overflow data
David Arcari <[email protected]>
cpufreq: cpufreq_register_driver() should return -ENODEV if init fails
Daniel Micay <[email protected]>
stackprotector: Increase the per-task stack canary's random range from 32 bits to 64 bits on 64-bit platforms
Eric Biggers <[email protected]>
random: properly align get_random_int_hash
Daniel Cashman <[email protected]>
drivers: char: random: add get_random_long()
Matt Ranostay <[email protected]>
iio: proximity: as3935: fix AS3935_INT mask
Franziska Naepelt <[email protected]>
iio: light: ltr501 Fix interchanged als/ps register field
Oleg Drokin <[email protected]>
staging/lustre/lov: remove set_fs() call from lov_getstripe()
Michael Thalmeier <[email protected]>
usb: chipidea: debug: check before accessing ci_role
Jisheng Zhang <[email protected]>
usb: chipidea: udc: fix NULL pointer dereference if udc_start failed
Thinh Nguyen <[email protected]>
usb: gadget: f_mass_storage: Serialize wake and sleep execution
Jan Kara <[email protected]>
ext4: fix fdatasync(2) after extent manipulation operations
Konstantin Khlebnikov <[email protected]>
ext4: keep existing extra fields when inode expands
Jan Kara <[email protected]>
ext4: fix SEEK_HOLE
Dongli Zhang <[email protected]>
xen-netfront: cast grant table reference first to type int
Dongli Zhang <[email protected]>
xen-netfront: do not cast grant table reference to signed short
Julien Grall <[email protected]>
xen/privcmd: Support correctly 64KB page granularity when mapping memory
Alexander Sverdlin <[email protected]>
dmaengine: ep93xx: Always start from BASE0
Hiroyuki Yokoyama <[email protected]>
dmaengine: usb-dmac: Fix DMAOR AE bit definition
Wanpeng Li <[email protected]>
KVM: async_pf: avoid async pf injection when in guest mode
Marc Zyngier <[email protected]>
arm: KVM: Allow unaligned accesses at HYP
Wanpeng Li <[email protected]>
KVM: cpuid: Fix read/write out-of-bounds vulnerability in cpuid emulation
Paolo Bonzini <[email protected]>
kvm: async_pf: fix rcu_irq_enter() with irqs enabled
Trond Myklebust <[email protected]>
nfsd: Fix up the "supattr_exclcreat" attributes
J. Bruce Fields <[email protected]>
nfsd4: fix null dereference on replay
Alex Deucher <[email protected]>
drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)
Gilad Ben-Yossef <[email protected]>
crypto: gcm - wait for crypto op not signal safe
Eric Biggers <[email protected]>
KEYS: fix freeing uninitialized memory in key_update()
Eric Biggers <[email protected]>
KEYS: fix dereferencing NULL payload with nonzero length
Eric W. Biederman <[email protected]>
ptrace: Properly initialize ptracer_cred on fork
Johan Hovold <[email protected]>
serial: ifx6x60: fix use-after-free on module unload
Jane Chu <[email protected]>
arch/sparc: support NR_CPUS = 4096
Pavel Tatashin <[email protected]>
sparc64: delete old wrap code
Pavel Tatashin <[email protected]>
sparc64: new context wrap
Pavel Tatashin <[email protected]>
sparc64: add per-cpu mm of secondary contexts
Pavel Tatashin <[email protected]>
sparc64: redefine first version
Pavel Tatashin <[email protected]>
sparc64: combine activate_mm and switch_mm
Pavel Tatashin <[email protected]>
sparc64: reset mm cpumask after wrap
James Clarke <[email protected]>
sparc: Machine description indices can vary
Mike Kravetz <[email protected]>
sparc64: mm: fix copy_tsb to correctly copy huge page TSBs
Nikolay Aleksandrov <[email protected]>
net: bridge: start hello timer only if device is up
Max Filippov <[email protected]>
net: ethoc: enable NAPI before poll may be scheduled
Eric Dumazet <[email protected]>
net: ping: do not abuse udp_poll()
David S. Miller <[email protected]>
ipv6: Fix leak in ipv6_gso_segment().
Mark Bloch <[email protected]>
vxlan: fix use-after-free on deletion
Yuchung Cheng <[email protected]>
tcp: disallow cwnd undo when switching congestion control
Ganesh Goudar <[email protected]>
cxgb4: avoid enabling napi twice to the same queue
Ben Hutchings <[email protected]>
ipv6: xfrm: Handle errors reported by xfrm6_find_1stfragopt()
Mintz, Yuval <[email protected]>
bnx2x: Fix Multi-Cos
-------------
Diffstat:
Makefile | 4 +- arch/arm/kvm/init.S | 5 +- arch/arm/kvm/mmu.c | 3 + arch/arm64/include/asm/asm-uaccess.h | 13 ++++ arch/arm64/include/asm/barrier.h | 18 ++++- arch/arm64/include/asm/uaccess.h | 8 ++ arch/arm64/kernel/armv8_deprecated.c | 3 +- arch/arm64/kernel/entry.S | 6 +- arch/arm64/kernel/hw_breakpoint.c | 3 +- arch/powerpc/include/asm/topology.h | 14 ++++ arch/powerpc/kernel/eeh_driver.c | 19 ++++- arch/powerpc/kernel/setup_64.c | 4 +- arch/powerpc/platforms/pseries/hotplug-memory.c | 2 + arch/sparc/Kconfig | 4 +- arch/sparc/include/asm/mmu_64.h | 2 +- arch/sparc/include/asm/mmu_context_64.h | 32 +------- arch/sparc/include/asm/pil.h | 1 - arch/sparc/include/asm/vio.h | 1 + arch/sparc/kernel/irq_64.c | 17 ++++- arch/sparc/kernel/kernel.h | 1 - arch/sparc/kernel/smp_64.c | 31 -------- arch/sparc/kernel/tsb.S | 11 ++- arch/sparc/kernel/ttable_64.S | 2 +- arch/sparc/kernel/vio.c | 68 ++++++++++++++++- arch/sparc/mm/init_64.c | 86 +++++++++++++++------- arch/sparc/mm/tsb.c | 7 +- arch/sparc/mm/ultra.S | 5 -- arch/x86/kernel/kvm.c | 2 +- arch/x86/kvm/cpuid.c | 20 ++--- arch/x86/kvm/mmu.c | 7 +- arch/x86/kvm/mmu.h | 1 + arch/x86/kvm/x86.c | 3 +- crypto/gcm.c | 6 +- drivers/char/mem.c | 2 +- drivers/char/random.c | 26 ++++++- drivers/cpufreq/cpufreq.c | 1 + drivers/dma/ep93xx_dma.c | 2 + drivers/dma/sh/usb-dmac.c | 2 +- drivers/gpu/drm/amd/amdgpu/ci_dpm.c | 6 ++ drivers/gpu/drm/msm/msm_drv.c | 1 + drivers/gpu/drm/msm/msm_drv.h | 1 + drivers/gpu/drm/msm/msm_gem_prime.c | 7 ++ .../gpu/drm/nouveau/include/nvkm/subdev/timer.h | 1 + drivers/gpu/drm/nouveau/nvkm/subdev/timer/base.c | 7 +- drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c | 2 + drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 21 ++++-- drivers/iio/light/ltr501.c | 4 +- drivers/iio/proximity/as3935.c | 4 +- drivers/infiniband/hw/qib/qib_rc.c | 4 +- drivers/input/mouse/elantech.c | 16 ++++ drivers/misc/cxl/file.c | 7 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 2 +- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 4 + drivers/net/ethernet/ethoc.c | 3 +- drivers/net/vxlan.c | 19 +++-- drivers/net/xen-netfront.c | 4 +- drivers/scsi/qla2xxx/qla_os.c | 8 +- drivers/staging/lustre/lustre/lov/lov_pack.c | 9 --- drivers/target/target_core_transport.c | 23 ++++-- drivers/tty/serial/ifx6x60.c | 2 +- drivers/tty/serial/sh-sci.c | 10 ++- drivers/tty/tty_io.c | 3 +- drivers/tty/tty_mutex.c | 7 +- drivers/usb/chipidea/debug.c | 3 +- drivers/usb/chipidea/udc.c | 8 +- drivers/usb/gadget/function/f_mass_storage.c | 13 +++- drivers/xen/privcmd.c | 4 +- fs/btrfs/extent-tree.c | 1 + fs/btrfs/file.c | 2 +- fs/btrfs/inode.c | 4 +- fs/buffer.c | 12 +-- fs/ceph/addr.c | 2 +- fs/direct-io.c | 2 +- fs/ext4/extents.c | 5 ++ fs/ext4/file.c | 50 ++++--------- fs/ext4/inode.c | 9 ++- fs/ext4/move_extent.c | 2 +- fs/jfs/super.c | 4 +- fs/mpage.c | 2 +- fs/nfs/dir.c | 21 +++++- fs/nfsd/blocklayout.c | 4 +- fs/nfsd/nfs4proc.c | 13 ++-- fs/nfsd/nfs4xdr.c | 13 +++- fs/nilfs2/btnode.c | 2 +- fs/nilfs2/inode.c | 4 +- fs/nilfs2/mdt.c | 4 +- fs/nilfs2/segment.c | 2 +- fs/ocfs2/aops.c | 2 +- fs/ocfs2/file.c | 2 +- fs/reiserfs/file.c | 2 +- fs/reiserfs/inode.c | 2 +- fs/stat.c | 3 +- fs/udf/inode.c | 2 +- fs/ufs/balloc.c | 26 ++++++- fs/ufs/inode.c | 9 ++- fs/ufs/super.c | 18 +++++ fs/ufs/util.h | 10 ++- fs/xfs/xfs_aops.c | 10 +-- fs/xfs/xfs_file.c | 4 +- fs/xfs/xfs_xattr.c | 1 + include/linux/cgroup.h | 20 +++++ include/linux/fs.h | 5 ++ include/linux/memblock.h | 8 ++ include/linux/mmzone.h | 1 + include/linux/ptrace.h | 7 +- include/linux/random.h | 1 + include/linux/skbuff.h | 3 - include/net/ipv6.h | 1 + kernel/cpuset.c | 4 +- kernel/events/core.c | 21 ++++++ kernel/fork.c | 2 +- kernel/ptrace.c | 20 +++-- kernel/trace/trace.c | 2 +- lib/test_user_copy.c | 20 ++++- mm/memblock.c | 24 ++++++ mm/page_alloc.c | 25 ++++++- mm/truncate.c | 2 +- net/bridge/br_stp_if.c | 3 +- net/core/dev.c | 33 ++++----- net/ipv4/af_inet.c | 2 +- net/ipv4/tcp_cong.c | 1 + net/ipv6/ip6_offload.c | 4 +- net/ipv6/ping.c | 2 +- net/ipv6/raw.c | 2 +- net/ipv6/xfrm6_mode_ro.c | 2 + net/ipv6/xfrm6_mode_transport.c | 2 + security/keys/key.c | 5 +- security/keys/keyctl.c | 4 +- sound/core/timer.c | 7 +- sound/soc/soc-core.c | 5 +- 130 files changed, 770 insertions(+), 362 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/90 bnx2x: Fix Multi-Cos
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Mintz, Yuval" <[email protected]>
[ Upstream commit 3968d38917eb9bd0cd391265f6c9c538d9b33ffa ]
Apparently multi-cos isn't working for bnx2x quite some time - driver implements ndo_select_queue() to allow queue-selection for FCoE, but the regular L2 flow would cause it to modulo the fallback's result by the number of queues.
The fallback would return a queue matching the needed tc [via __skb_tx_hash()], but since the modulo is by the number of TSS queues where number of TCs is not accounted, transmission would always be done by a queue configured into using TC0.
--- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +1 -1
@@ -1949,7 +1949,7 @@ u16 bnx2x_select_queue(struct net_device }/* select a non-FCoE queue */ -return fallback (dev, skb) %BNX2X_NUM_ETH_QUEUES (bp); +return fallback (dev, skb) % (BNX2X_NUM_ETH_QUEUES (bp) * bp->max_cos); }void bnx2x_set_num_queues (struct bnx2x *bp)
Greg Kroah-Hartman
maintainerPATCH 2/90 ipv6: xfrm: Handle errors reported by xfrm6_find_1stfragopt()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <[email protected]>
[ Upstream commit 6e80ac5cc992ab6256c3dae87f7e57db15e1a58c ]
xfrm6_find_1stfragopt() may now return an error code and we must not treat it as a length.
--- net/ipv6/xfrm6_mode_ro.c | 2 ++ net/ipv6/xfrm6_mode_transport.c | 2 ++ 2 files changed, 4 insertions(+)
net/ipv6/xfrm6_mode_ro.c +2 -0
@@ -47,6 +47,8 @@ static int xfrm6_ro_output(struct xfrm_s iph =ipv6_hdr (skb); hdr_len = x->type->hdr_offset (x, skb, &prevhdr); +if (hdr_len <0 ) +return hdr_len;skb_set_mac_header (skb, (prevhdr - x->props.header_len) - skb->data);skb_set_network_header (skb, -x->props.header_len); skb->transport_header = skb->network_header + hdr_len;
net/ipv6/xfrm6_mode_transport.c +2 -0
@@ -28,6 +28,8 @@ static int xfrm6_transport_output(struct iph =ipv6_hdr (skb); hdr_len = x->type->hdr_offset (x, skb, &prevhdr); +if (hdr_len <0 ) +return hdr_len;skb_set_mac_header (skb, (prevhdr - x->props.header_len) - skb->data);skb_set_network_header (skb, -x->props.header_len); skb->transport_header = skb->network_header + hdr_len;
Greg Kroah-Hartman
maintainerPATCH 3/90 cxgb4: avoid enabling napi twice to the same queue
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ganesh Goudar <[email protected]>
[ Upstream commit e7519f9926f1d0d11c776eb0475eb098c7760f68 ]
Take uld mutex to avoid race between cxgb_up() and cxgb4_register_uld() to enable napi for the same uld queue.
--- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +4 -0
@@ -2714,10 +2714,14 @@ static int cxgb_up(struct adapter *adap)if (err) goto irq_err; } + +mutex_lock (&uld_mutex);enable_rx (adap);t4_sge_start (adap);t4_intr_enable (adap); adap->flags |=FULL_INIT_DONE ; +mutex_unlock (&uld_mutex); +notify_ulds (adap,CXGB4_STATE_UP );#if IS_ENABLED (CONFIG_IPV6 )update_clip (adap);
Greg Kroah-Hartman
maintainerPATCH 4/90 tcp: disallow cwnd undo when switching congestion control
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yuchung Cheng <[email protected]>
[ Upstream commit 44abafc4cc094214a99f860f778c48ecb23422fc ]
When the sender switches its congestion control during loss recovery, if the recovery is spurious then it may incorrectly revert cwnd and ssthresh to the older values set by a previous congestion control. Consider a congestion control (like BBR) that does not use ssthresh and keeps it infinite: the connection may incorrectly revert cwnd to an infinite value when switching from BBR to another congestion control.
This patch fixes it by disallowing such cwnd undo operation upon switching congestion control. Note that undo_marker is not reset s.t. the packets that were incorrectly marked lost would be corrected. We only avoid undoing the cwnd in tcp_undo_cwnd_reduction().
--- net/ipv4/tcp_cong.c | 1 + 1 file changed, 1 insertion(+)
net/ipv4/tcp_cong.c +1 -0
@@ -183,6 +183,7 @@ void tcp_init_congestion_control(struct {const struct inet_connection_sock *icsk =inet_csk (sk); +tcp_sk (sk)->prior_ssthresh =0 ;if (icsk->icsk_ca_ops->init) icsk->icsk_ca_ops->init (sk);if (tcp_ca_needs_ecn (sk))
Greg Kroah-Hartman
maintainerPATCH 5/90 vxlan: fix use-after-free on deletion
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Bloch <[email protected]>
[ Upstream commit a53cb29b0af346af44e4abf13d7e59f807fba690 ]
Adding a vxlan interface to a socket isn't symmetrical, while adding is done in vxlan_open() the deletion is done in vxlan_dellink(). This can cause a use-after-free error when we close the vxlan interface before deleting it.
We add vxlan_vs_del_dev() to match vxlan_vs_add_dev() and call it from vxlan_stop() to match the call from vxlan_open().
--- drivers/net/vxlan.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-)
drivers/net/vxlan.c +13 -6
@@ -77,6 +77,8 @@ static const u8 all_zeros_mac[ETH_ALEN];static int vxlan_sock_add (struct vxlan_dev *vxlan); +static void vxlan_vs_del_dev (struct vxlan_dev *vxlan); +/* per-network namespace private data for this module */ struct vxlan_net {struct list_head vxlan_list;
@@ -1052,6 +1054,8 @@ static void __vxlan_sock_release(structstatic void vxlan_sock_release (struct vxlan_dev *vxlan) { +vxlan_vs_del_dev (vxlan); +__vxlan_sock_release (vxlan->vn4_sock);#if IS_ENABLED (CONFIG_IPV6 )__vxlan_sock_release (vxlan->vn6_sock);
@@ -2255,6 +2259,15 @@ static void vxlan_cleanup(unsigned longmod_timer (&vxlan->age_timer, next_timer); } +static void vxlan_vs_del_dev (struct vxlan_dev *vxlan) +{ +struct vxlan_net *vn =net_generic (vxlan->net, vxlan_net_id); + +spin_lock (&vn->sock_lock); +hlist_del_init_rcu (&vxlan->hlist); +spin_unlock (&vn->sock_lock); +} +static void vxlan_vs_add_dev (struct vxlan_sock *vs,struct vxlan_dev *vxlan) {struct vxlan_net *vn =net_generic (vxlan->net, vxlan_net_id);
@@ -3028,12 +3041,6 @@ static int vxlan_newlink(struct net *srcstatic void vxlan_dellink (struct net_device *dev,struct list_head *head) {struct vxlan_dev *vxlan =netdev_priv (dev); -struct vxlan_net *vn =net_generic (vxlan->net, vxlan_net_id); - -spin_lock (&vn->sock_lock); -if (!hlist_unhashed (&vxlan->hlist)) -hlist_del_rcu (&vxlan->hlist); -spin_unlock (&vn->sock_lock);gro_cells_destroy (&vxlan->gro_cells);list_del (&vxlan->next);
Greg Kroah-Hartman
maintainerPATCH 6/90 ipv6: Fix leak in ipv6_gso_segment().
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: "David S. Miller" <[email protected]>
[ Upstream commit e3e86b5119f81e5e2499bea7ea1ebe8ac6aab789 ]
If ip6_find_1stfragopt() fails and we return an error we have to free up 'segs' because nobody else is going to.
--- net/ipv6/ip6_offload.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
net/ipv6/ip6_offload.c +3 -1
@@ -121,8 +121,10 @@ static struct sk_buff *ipv6_gso_segment(if (udpfrag) {int err =ip6_find_1stfragopt (skb, &prevhdr); -if (err <0 ) +if (err <0 ) { +kfree_skb_list (segs);return ERR_PTR (err); + } fptr = (struct frag_hdr *)((u8 *)ipv6h + err); fptr->frag_off =htons (offset);if (skb->next)
Greg Kroah-Hartman
maintainerPATCH 7/90 net: ping: do not abuse udp_poll()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 77d4b1d36926a9b8387c6b53eeba42bcaaffcea3 ]
Alexander reported various KASAN messages triggered in recent kernels
The problem is that ping sockets should not use udp_poll() in the first place, and recent changes in UDP stack finally exposed this old bug.
--- include/net/ipv6.h | 1 + net/ipv4/af_inet.c | 2 +- net/ipv6/ping.c | 2 +- net/ipv6/raw.c | 2 +- 4 files changed, 4 insertions(+), 3 deletions(-)
include/net/ipv6.h +1 -0
@@ -958,6 +958,7 @@ int inet6_hash_connect(struct inet_timew*/ extern const struct proto_ops inet6_stream_ops;extern const struct proto_ops inet6_dgram_ops; +extern const struct proto_ops inet6_sockraw_ops;struct group_source_req ;struct group_filter ;
net/ipv4/af_inet.c +1 -1
@@ -1014,7 +1014,7 @@ static struct inet_protosw inetsw_array[ .type = SOCK_DGRAM, .protocol = IPPROTO_ICMP, .prot = &ping_prot, - .ops = &inet_dgram_ops, + .ops = &inet_sockraw_ops, .flags = INET_PROTOSW_REUSE, },
net/ipv6/ping.c +1 -1
@@ -50,7 +50,7 @@ static struct inet_protosw pingv6_protos .type = SOCK_DGRAM, .protocol = IPPROTO_ICMPV6, .prot = &pingv6_prot, - .ops = &inet6_dgram_ops, + .ops = &inet6_sockraw_ops, .flags = INET_PROTOSW_REUSE, };
net/ipv6/raw.c +1 -1
@@ -1303,7 +1303,7 @@ void raw6_proc_exit(void)#endif /* CONFIG_PROC_FS */ /* Same as inet6_dgram_ops, sans udp_poll. */ -static const struct proto_ops inet6_sockraw_ops = { +const struct proto_ops inet6_sockraw_ops = { .family =PF_INET6 , .owner =THIS_MODULE , .release = inet6_release,
Greg Kroah-Hartman
maintainerPATCH 8/90 net: ethoc: enable NAPI before poll may be scheduled
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov <[email protected]>
[ Upstream commit d220b942a4b6a0640aee78841608f4aa5e8e185e ]
ethoc_reset enables device interrupts, ethoc_interrupt may schedule a NAPI poll before NAPI is enabled in the ethoc_open, which results in device being unable to send or receive anything until it's closed and reopened. In case the device is flooded with ingress packets it may be unable to recover at all.
Move napi_enable above ethoc_reset in the ethoc_open to fix that.
--- drivers/net/ethernet/ethoc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/ethoc.c +2 -1
@@ -713,6 +713,8 @@ static int ethoc_open(struct net_deviceif (ret)return ret; +napi_enable (&priv->napi); +ethoc_init_ring (priv, dev->mem_start);ethoc_reset (priv);
@@ -725,7 +727,6 @@ static int ethoc_open(struct net_device }phy_start (priv->phy); -napi_enable (&priv->napi);if (netif_msg_ifup (priv)) { dev_info(&dev->dev, "I/O: %08lx Memory: %08lx-%08lx\n",
Greg Kroah-Hartman
maintainerPATCH 9/90 net: bridge: start hello timer only if device is up
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikolay Aleksandrov <[email protected]>
[ Upstream commit aeb073241fe7a2b932e04e20c60e47718332877f ]
When the transition of NO_STP -> KERNEL_STP was fixed by always calling mod_timer in br_stp_start, it introduced a new regression which causes the timer to be armed even when the bridge is down, and since we stop the timers in its ndo_stop() function, they never get disabled if the device is destroyed before it's upped.
To reproduce:
$ while :; do ip l add br0 type bridge hello_time 100; brctl stp br0 on; ip l del br0; done;
--- net/bridge/br_stp_if.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
net/bridge/br_stp_if.c +2 -1
@@ -166,7 +166,8 @@ static void br_stp_start(struct net_bridbr_debug (br,"using kernel STP\n" );/* To start timers on any ports left in blocking */ -mod_timer (&br->hello_timer, jiffies + br->hello_time); +if (br->dev->flags &IFF_UP ) +mod_timer (&br->hello_timer, jiffies + br->hello_time);br_port_state_selection (br); }
Greg Kroah-Hartman
maintainerPATCH 10/90 sparc64: mm: fix copy_tsb to correctly copy huge page TSBs
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Kravetz <[email protected]>
[ Upstream commit 654f4807624a657f364417c2a7454f0df9961734 ]
When a TSB grows beyond its current capacity, a new TSB is allocated and copy_tsb is called to copy entries from the old TSB to the new. A hash shift based on page size is used to calculate the index of an entry in the TSB. copy_tsb has hard coded PAGE_SHIFT in these calculations. However, for huge page TSBs the value REAL_HPAGE_SHIFT should be used. As a result, when copy_tsb is called for a huge page TSB the entries are placed at the incorrect index in the newly allocated TSB. When doing hardware table walk, the MMU does not match these entries and we end up in the TSB miss handling code. This code will then create and write an entry to the correct index in the TSB. We take a performance hit for the table walk miss and recreation of these entries.
Pass a new parameter to copy_tsb that is the page size shift to be used when copying the TSB.
--- arch/sparc/kernel/tsb.S | 11 +++++++---- arch/sparc/mm/tsb.c | 7 +++++-- 2 files changed, 12 insertions(+), 6 deletions(-)
arch/sparc/kernel/tsb.S +7 -4
@@ -470,13 +470,16 @@ __tsb_context_switch: .type copy_tsb,#function copy_tsb: /* %o0=old_tsb_base, %o1=old_tsb_size * %o2=new_tsb_base, %o3=new_tsb_size + * %o4=page_size_shift */ sethi %uhi(TSB_PASS_BITS), %g7 srlx %o3, 4, %o3 - add %o0, %o1, %g1 /* end of old tsb */ + add %o0, %o1, %o1 /* end of old tsb */ sllx %g7, 32, %g7 sub %o3, 1, %o3 /* %o3 == new tsb hash mask */ + mov %o4, %g1 /* page_size_shift */ + 661: prefetcha [%o0] ASI_N, #one_read .section .tsb_phys_patch, "ax" .word 661b
@@ -501,9 +504,9 @@ copy_tsb: /* %o0=old_tsb_base, %o1=old_ /* This can definitely be computed faster... */ srlx %o0, 4, %o5 /* Build index */ and %o5, 511, %o5 /* Mask index */ - sllx %o5, PAGE_SHIFT, %o5 /* Put into vaddr position */ + sllx %o5, %g1, %o5 /* Put into vaddr position */ or %o4, %o5, %o4 /* Full VADDR. */ - srlx %o4, PAGE_SHIFT, %o4 /* Shift down to create index */ + srlx %o4, %g1, %o4 /* Shift down to create index */ and %o4, %o3, %o4 /* Mask with new_tsb_nents-1 */ sllx %o4, 4, %o4 /* Shift back up into tsb ent offset */ TSB_STORE(%o2 + %o4, %g2) /* Store TAG */
@@ -511,7 +514,7 @@ copy_tsb: /* %o0=old_tsb_base, %o1=old_ TSB_STORE(%o2 + %o4, %g3) /* Store TTE */ 80: add %o0, 16, %o0 - cmp %o0, %g1 + cmp %o0, %o1 bne,pt %xcc, 90b nop
arch/sparc/mm/tsb.c +5 -2
@@ -451,7 +451,8 @@ retry_tsb_alloc:extern void copy_tsb (unsigned long old_tsb_base,unsigned long old_tsb_size,unsigned long new_tsb_base, -unsigned long new_tsb_size); +unsigned long new_tsb_size, +unsigned long page_size_shift);unsigned long old_tsb_base = (unsigned long ) old_tsb;unsigned long new_tsb_base = (unsigned long ) new_tsb;
@@ -459,7 +460,9 @@ retry_tsb_alloc: old_tsb_base =__pa (old_tsb_base); new_tsb_base =__pa (new_tsb_base); } -copy_tsb (old_tsb_base, old_size, new_tsb_base, new_size); +copy_tsb (old_tsb_base, old_size, new_tsb_base, new_size, + tsb_index ==MM_TSB_BASE ? +PAGE_SHIFT :REAL_HPAGE_SHIFT ); } mm->context.tsb_block[tsb_index].tsb = new_tsb;
Greg Kroah-Hartman
maintainerPATCH 11/90 sparc: Machine description indices can vary
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Clarke <[email protected]>
[ Upstream commit c982aa9c304bf0b9a7522fd118fed4afa5a0263c ]
VIO devices were being looked up by their index in the machine description node block, but this often varies over time as devices are added and removed. Instead, store the ID and look up using the type, config handle and ID.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112541
--- arch/sparc/include/asm/vio.h | 1 arch/sparc/kernel/vio.c | 68 ++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 65 insertions(+), 4 deletions(-)
arch/sparc/include/asm/vio.h +1 -0
@@ -327,6 +327,7 @@ struct vio_dev {int compat_len;u64 dev_no; +u64 id;unsigned long channel_id;
arch/sparc/kernel/vio.c +64 -4
104 lines not on this page · raw message
Greg Kroah-Hartman
maintainerPATCH 12/90 sparc64: reset mm cpumask after wrap
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavel Tatashin <[email protected]>
[ Upstream commit 588974857359861891f478a070b1dc7ae04a3880 ]
After a wrap (getting a new context version) a process must get a new context id, which means that we would need to flush the context id from the TLB before running for the first time with this ID on every CPU. But, we use mm_cpumask to determine if this process has been running on this CPU before, and this mask is not reset after a wrap. So, there are two possible fixes for this issue:
1. Clear mm cpumask whenever mm gets a new context id
2. Unconditionally flush context every time process is running on a CPU
This patch implements the first solution
--- arch/sparc/mm/init_64.c | 2 ++ 1 file changed, 2 insertions(+)
arch/sparc/mm/init_64.c +2 -0
@@ -708,6 +708,8 @@ void get_new_mmu_context(struct mm_struc goto out; } } +if (mm->context.sparc64_ctx_val) +cpumask_clear (mm_cpumask (mm)); mmu_context_bmap[new_ctx>>6 ] |= (1UL << (new_ctx &63 )); new_ctx |= (tlb_context_cache &CTX_VERSION_MASK ); out:
Greg Kroah-Hartman
maintainerPATCH 13/90 sparc64: combine activate_mm and switch_mm
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavel Tatashin <[email protected]>
[ Upstream commit 14d0334c6748ff2aedb3f2f7fdc51ee90a9b54e7 ]
The only difference between these two functions is that in activate_mm we unconditionally flush context. However, there is no need to keep this difference after fixing a bug where cpumask was not reset on a wrap. So, in this patch we combine these.
--- arch/sparc/include/asm/mmu_context_64.h | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-)
arch/sparc/include/asm/mmu_context_64.h +1 -20
@@ -131,26 +131,7 @@ static inline void switch_mm(struct mm_s }#define deactivate_mm (tsk,mm) do { } while (0) - -/* Activate a new MM instance for the current task. */ -static inline void activate_mm (struct mm_struct *active_mm,struct mm_struct *mm) -{ -unsigned long flags; -int cpu; - -spin_lock_irqsave (&mm->context.lock, flags); -if (!CTX_VALID (mm->context)) -get_new_mmu_context (mm); - cpu =smp_processor_id (); -if (!cpumask_test_cpu (cpu,mm_cpumask (mm))) -cpumask_set_cpu (cpu,mm_cpumask (mm)); - -load_secondary_context (mm); -__flush_tlb_mm (CTX_HWBITS (mm->context),SECONDARY_CONTEXT ); -tsb_context_switch (mm); -spin_unlock_irqrestore (&mm->context.lock, flags); -} - +#define activate_mm (active_mm, mm) switch_mm(active_mm, mm, NULL)#endif /* !(__ASSEMBLY__) */ #endif /* !(__SPARC64_MMU_CONTEXT_H) */
Greg Kroah-Hartman
maintainerPATCH 14/90 sparc64: redefine first version
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavel Tatashin <[email protected]>
[ Upstream commit c4415235b2be0cc791572e8e7f7466ab8f73a2bf ]
CTX_FIRST_VERSION defines the first context version, but also it defines first context. This patch redefines it to only include the first context version.
--- arch/sparc/include/asm/mmu_64.h | 2 +- arch/sparc/mm/init_64.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-)
arch/sparc/include/asm/mmu_64.h +1 -1
@@ -52,7 +52,7 @@#define CTX_NR_MASK TAG_CONTEXT_BITS#define CTX_HW_MASK (CTX_NR_MASK | CTX_PGSZ_MASK) -#define CTX_FIRST_VERSION ((_AC(1,UL) << CTX_VERSION_SHIFT) + _AC(1,UL)) +#define CTX_FIRST_VERSION BIT(CTX_VERSION_SHIFT)#define CTX_VALID (__ctx) \ (!(((__ctx.sparc64_ctx_val) ^ tlb_context_cache) & CTX_VERSION_MASK))#define CTX_HWBITS (__ctx) ((__ctx.sparc64_ctx_val) & CTX_HW_MASK)
arch/sparc/mm/init_64.c +3 -3
@@ -656,7 +656,7 @@ EXPORT_SYMBOL(__flush_dcache_range);/* get_new_mmu_context() uses "cache + 1". */ DEFINE_SPINLOCK (ctx_alloc_lock); -unsigned long tlb_context_cache =CTX_FIRST_VERSION -1 ; +unsigned long tlb_context_cache =CTX_FIRST_VERSION ;#define MAX_CTX_NR (1UL << CTX_NR_BITS)#define CTX_BMAP_SLOTS BITS_TO_LONGS(MAX_CTX_NR)DECLARE_BITMAP (mmu_context_bmap,MAX_CTX_NR );
@@ -687,9 +687,9 @@ void get_new_mmu_context(struct mm_strucif (new_ctx >= ctx) {int i; new_ctx = (tlb_context_cache &CTX_VERSION_MASK ) + -CTX_FIRST_VERSION ; +CTX_FIRST_VERSION +1 ;if (new_ctx ==1 ) - new_ctx =CTX_FIRST_VERSION ; + new_ctx =CTX_FIRST_VERSION +1 ;/* Don't call memset, for 16 entries that's just * plain silly...
Greg Kroah-Hartman
maintainerPATCH 15/90 sparc64: add per-cpu mm of secondary contexts
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavel Tatashin <[email protected]>
[ Upstream commit 7a5b4bbf49fe86ce77488a70c5dccfe2d50d7a2d ]
The new wrap is going to use information from this array to figure out mm's that currently have valid secondary contexts setup.
--- arch/sparc/include/asm/mmu_context_64.h | 5 +++-- arch/sparc/mm/init_64.c | 1 + 2 files changed, 4 insertions(+), 2 deletions(-)
arch/sparc/include/asm/mmu_context_64.h +3 -2
@@ -17,6 +17,7 @@ extern spinlock_t ctx_alloc_lock;extern unsigned long tlb_context_cache;extern unsigned long mmu_context_bmap[]; +DECLARE_PER_CPU(struct mm_struct *, per_cpu_secondary_mm);void get_new_mmu_context (struct mm_struct *mm);#ifdef CONFIG_SMP void smp_new_mmu_context_version (void );
@@ -74,8 +75,9 @@ void __flush_tlb_mm(unsigned long, unsigstatic inline void switch_mm (struct mm_struct *old_mm,struct mm_struct *mm,struct task_struct *tsk) {unsigned long ctx_valid, flags; -int cpu; +int cpu =smp_processor_id (); +per_cpu (per_cpu_secondary_mm, cpu) = mm;if (unlikely (mm == &init_mm))return ;
@@ -121,7 +123,6 @@ static inline void switch_mm(struct mm_s* for the first time, we must flush that context out of the * local TLB. */ - cpu =smp_processor_id ();if (!ctx_valid || !cpumask_test_cpu (cpu,mm_cpumask (mm))) {cpumask_set_cpu (cpu,mm_cpumask (mm)); __flush_tlb_mm(CTX_HWBITS(mm->context),
arch/sparc/mm/init_64.c +1 -0
@@ -660,6 +660,7 @@ unsigned long tlb_context_cache = CTX_FI#define MAX_CTX_NR (1UL << CTX_NR_BITS)#define CTX_BMAP_SLOTS BITS_TO_LONGS(MAX_CTX_NR)DECLARE_BITMAP (mmu_context_bmap,MAX_CTX_NR ); +DEFINE_PER_CPU(struct mm_struct *, per_cpu_secondary_mm) = {0};/* Caller does TLB context flushing on local CPU if necessary. * The caller also ensures that CTX_VALID(mm->context) is false.
Greg Kroah-Hartman
maintainerPATCH 16/90 sparc64: new context wrap
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavel Tatashin <[email protected]>
[ Upstream commit a0582f26ec9dfd5360ea2f35dd9a1b026f8adda0 ]
The current wrap implementation has a race issue: it is called outside of the ctx_alloc_lock, and also does not wait for all CPUs to complete the wrap. This means that a thread can get a new context with a new version and another thread might still be running with the same context. The problem is especially severe on CPUs with shared TLBs, like sun4v. I used the following test to very quickly reproduce the problem:
- start over 8K processes (must be more than context IDs)
- write and read values at a memory location in every process.
Very quickly memory corruptions start happening, and what we read back does not equal what we wrote.
Several approaches were explored before settling on this one:
Approach 1:
Move smp_new_mmu_context_version() inside ctx_alloc_lock, and wait for every process to complete the wrap. (Note: every CPU must WAIT before leaving smp_new_mmu_context_version_client() until every one arrives).
This approach ends up with deadlocks, as some threads own locks which other threads are waiting for, and they never receive softint until these threads exit smp_new_mmu_context_version_client(). Since we do not allow the exit, deadlock happens.
Approach 2:
Handle wrap right during mondo interrupt. Use etrap/rtrap to enter into into C code, and issue new versions to every CPU.
This approach adds some overhead to runtime: in switch_mm() we must add some checks to make sure that versions have not changed due to wrap while we were loading the new secondary context. (could be protected by PSTATE_IE but that degrades performance as on M7 and older CPUs as it takes 50 cycles for each access). Also, we still need a global per-cpu array of MMs to know where we need to load new contexts, otherwise we can change context to a thread that is going way (if we received mondo between switch_mm() and switch_to() time). Finally, there are some issues with window registers in rtrap() when context IDs are changed during CPU mondo time.
The approach in this patch is the simplest and has almost no impact on runtime. We use the array with mm's where last secondary contexts were loaded onto CPUs and bump their versions to the new generation without changing context IDs. If a new process comes in to get a context ID, it will go through get_new_mmu_context() because of version mismatch. But the running processes do not need to be interrupted. And wrap is quicker as we do not need to xcall and wait for everyone to receive and complete wrap.
--- arch/sparc/mm/init_64.c | 81 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 54 insertions(+), 27 deletions(-)
arch/sparc/mm/init_64.c +54 -27
@@ -662,6 +662,53 @@ unsigned long tlb_context_cache = CTX_FIDECLARE_BITMAP (mmu_context_bmap,MAX_CTX_NR ); DEFINE_PER_CPU(struct mm_struct *, per_cpu_secondary_mm) = {0}; +static void mmu_context_wrap (void ) +{ +unsigned long old_ver = tlb_context_cache &CTX_VERSION_MASK ; +unsigned long new_ver, new_ctx, old_ctx; +struct mm_struct *mm; +int cpu; + +bitmap_zero (mmu_context_bmap,1 <<CTX_NR_BITS ); + +/* Reserve kernel context */ +set_bit (0 , mmu_context_bmap); + + new_ver = (tlb_context_cache &CTX_VERSION_MASK ) +CTX_FIRST_VERSION ; +if (unlikely (new_ver ==0 )) + new_ver =CTX_FIRST_VERSION ; + tlb_context_cache = new_ver; + +/* +* Make sure that any new mm that are added into per_cpu_secondary_mm, +* are going to go through get_new_mmu_context() path. +*/ +mb (); + +/* +* Updated versions to current on those CPUs that had valid secondary +* contexts +*/ +for_each_online_cpu (cpu) { +/* +* If a new mm is stored after we took this mm from the array, +* it will go into get_new_mmu_context() path, because we +* already bumped the version in tlb_context_cache. +*/ + mm =per_cpu (per_cpu_secondary_mm, cpu); + +if (unlikely (!mm || mm == &init_mm)) +continue ; + + old_ctx = mm->context.sparc64_ctx_val; +if (likely ((old_ctx &CTX_VERSION_MASK ) == old_ver)) { + new_ctx = (old_ctx & ~CTX_VERSION_MASK ) | new_ver; +set_bit (new_ctx &CTX_NR_MASK , mmu_context_bmap); + mm->context.sparc64_ctx_val = new_ctx; + } + } +} +/* Caller does TLB context flushing on local CPU if necessary. * The caller also ensures that CTX_VALID(mm->context) is false. *
@@ -676,50 +723,30 @@ void get_new_mmu_context(struct mm_struc {unsigned long ctx, new_ctx;unsigned long orig_pgsz_bits; -int new_version;spin_lock (&ctx_alloc_lock); +retry: +/* wrap might have happened, test again if our context became valid */ +if (unlikely (CTX_VALID (mm->context))) + goto out; orig_pgsz_bits = (mm->context.sparc64_ctx_val &CTX_PGSZ_MASK ); ctx = (tlb_context_cache +1 ) &CTX_NR_MASK ; new_ctx =find_next_zero_bit (mmu_context_bmap,1 <<CTX_NR_BITS , ctx); - new_version =0 ;if (new_ctx >= (1 <<CTX_NR_BITS )) { new_ctx =find_next_zero_bit (mmu_context_bmap, ctx,1 );if (new_ctx >= ctx) { -int i; - new_ctx = (tlb_context_cache &CTX_VERSION_MASK ) + -CTX_FIRST_VERSION +1 ; -if (new_ctx ==1 ) - new_ctx =CTX_FIRST_VERSION +1 ; - -/* Don't call memset, for 16 entries that's just -* plain silly... -*/ - mmu_context_bmap[0 ] =3 ; - mmu_context_bmap[1 ] =0 ; - mmu_context_bmap[2 ] =0 ; - mmu_context_bmap[3 ] =0 ; -for (i =4 ; i <CTX_BMAP_SLOTS ; i +=4 ) { - mmu_context_bmap[i +0 ] =0 ; - mmu_context_bmap[i +1 ] =0 ; - mmu_context_bmap[i +2 ] =0 ; - mmu_context_bmap[i +3 ] =0 ; - } - new_version =1 ; - goto out; +mmu_context_wrap (); + goto retry; } }if (mm->context.sparc64_ctx_val)cpumask_clear (mm_cpumask (mm)); mmu_context_bmap[new_ctx>>6 ] |= (1UL << (new_ctx &63 )); new_ctx |= (tlb_context_cache &CTX_VERSION_MASK ); -out: tlb_context_cache = new_ctx; mm->context.sparc64_ctx_val = new_ctx | orig_pgsz_bits; +out:spin_unlock (&ctx_alloc_lock); - -if (unlikely (new_version)) -smp_new_mmu_context_version (); }static int numa_enabled =1 ;
Greg Kroah-Hartman
maintainerPATCH 17/90 sparc64: delete old wrap code
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavel Tatashin <[email protected]>
[ Upstream commit 0197e41ce70511dc3b71f7fefa1a676e2b5cd60b ]
The old method that is using xcall and softint to get new context id is deleted, as it is replaced by a method of using per_cpu_secondary_mm without xcall to perform the context wrap.
--- arch/sparc/include/asm/mmu_context_64.h | 6 ------ arch/sparc/include/asm/pil.h | 1 - arch/sparc/kernel/kernel.h | 1 - arch/sparc/kernel/smp_64.c | 31 ------------------------------- arch/sparc/kernel/ttable_64.S | 2 +- arch/sparc/mm/ultra.S | 5 ----- 6 files changed, 1 insertion(+), 45 deletions(-)
arch/sparc/include/asm/mmu_context_64.h +0 -6
@@ -19,12 +19,6 @@ extern unsigned long mmu_context_bmap[]; DECLARE_PER_CPU(struct mm_struct *, per_cpu_secondary_mm);void get_new_mmu_context (struct mm_struct *mm); -#ifdef CONFIG_SMP -void smp_new_mmu_context_version (void ); -#else -#define smp_new_mmu_context_version () do { } while (0) -#endif -int init_new_context (struct task_struct *tsk,struct mm_struct *mm);void destroy_context (struct mm_struct *mm);
arch/sparc/include/asm/pil.h +0 -1
@@ -20,7 +20,6 @@#define PIL_SMP_CALL_FUNC 1#define PIL_SMP_RECEIVE_SIGNAL 2#define PIL_SMP_CAPTURE 3 -#define PIL_SMP_CTX_NEW_VERSION 4#define PIL_DEVICE_IRQ 5#define PIL_SMP_CALL_FUNC_SNGL 6#define PIL_DEFERRED_PCR_WORK 7
arch/sparc/kernel/kernel.h +0 -1
@@ -37,7 +37,6 @@ void handle_stdfmna(struct pt_regs *regs/* smp_64.c */ void __irq_entry smp_call_function_client(int irq, struct pt_regs *regs); void __irq_entry smp_call_function_single_client(int irq, struct pt_regs *regs); -void __irq_entry smp_new_mmu_context_version_client(int irq, struct pt_regs *regs); void __irq_entry smp_penguin_jailcell(int irq, struct pt_regs *regs); void __irq_entry smp_receive_signal_client(int irq, struct pt_regs *regs);
arch/sparc/kernel/smp_64.c +0 -31
@@ -959,37 +959,6 @@ void flush_dcache_page_all(struct mm_strpreempt_enable (); } -void __irq_entry smp_new_mmu_context_version_client(int irq, struct pt_regs *regs) -{ -struct mm_struct *mm; -unsigned long flags; - -clear_softint (1 << irq); - -/* See if we need to allocate a new TLB context because -* the version of the one we are using is now out of date. -*/ - mm = current->active_mm; -if (unlikely (!mm || (mm == &init_mm))) -return ; - -spin_lock_irqsave (&mm->context.lock, flags); - -if (unlikely (!CTX_VALID (mm->context))) -get_new_mmu_context (mm); - -spin_unlock_irqrestore (&mm->context.lock, flags); - -load_secondary_context (mm); -__flush_tlb_mm (CTX_HWBITS (mm->context), -SECONDARY_CONTEXT ); -} - -void smp_new_mmu_context_version (void ) -{ -smp_cross_call (&xcall_new_mmu_context_version,0 ,0 ,0 ); -} -#ifdef CONFIG_KGDB void kgdb_roundup_cpus (unsigned long flags) {
arch/sparc/kernel/ttable_64.S +1 -1
@@ -50,7 +50,7 @@ tl0_resv03e: BTRAP(0x3e) BTRAP(0x3f) BTR tl0_irq1: TRAP_IRQ(smp_call_function_client, 1) tl0_irq2: TRAP_IRQ(smp_receive_signal_client, 2) tl0_irq3: TRAP_IRQ(smp_penguin_jailcell, 3) -tl0_irq4: TRAP_IRQ(smp_new_mmu_context_version_client, 4) +tl0_irq4: BTRAP(0x44) #else tl0_irq1: BTRAP(0x41) tl0_irq2: BTRAP(0x42)
arch/sparc/mm/ultra.S +0 -5
@@ -971,11 +971,6 @@ xcall_capture: wr %g0, (1 << PIL_SMP_CAPTURE), %set_softint retry - .globl xcall_new_mmu_context_version -xcall_new_mmu_context_version: - wr %g0, (1 << PIL_SMP_CTX_NEW_VERSION), %set_softint - retry - #ifdef CONFIG_KGDB .globl xcall_kgdb_capture xcall_kgdb_capture:
Greg Kroah-Hartman
maintainerPATCH 18/90 arch/sparc: support NR_CPUS = 4096
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jane Chu <[email protected]>
[ Upstream commit c79a13734d104b5b147d7cb0870276ccdd660dae ]
Linux SPARC64 limits NR_CPUS to 4064 because init_cpu_send_mondo_info() only allocates a single page for NR_CPUS mondo entries. Thus we cannot use all 4096 CPUs on some SPARC platforms.
To fix, allocate (2^order) pages where order is set according to the size of cpu_list for possible cpus. Since cpu_list_pa and cpu_mondo_block_pa are not used in asm code, there are no imm13 offsets from the base PA that will break because they can only reach one page.
Orabug: 25505750
--- arch/sparc/Kconfig | 4 ++-- arch/sparc/kernel/irq_64.c | 17 +++++++++++++---- 2 files changed, 15 insertions(+), 6 deletions(-)
arch/sparc/Kconfig +2 -2
@@ -182,9 +182,9 @@ config NR_CPUS int "Maximum number of CPUs" depends on SMP range 2 32 if SPARC32 - range 2 1024 if SPARC64 + range 2 4096 if SPARC64 default 32 if SPARC32 - default 64 if SPARC64 + default 4096 if SPARC64 source kernel/Kconfig.hz
arch/sparc/kernel/irq_64.c +13 -4
@@ -1034,17 +1034,26 @@ static void __init init_cpu_send_mondo_i {#ifdef CONFIG_SMP unsigned long page; +void *mondo, *p; -BUILD_BUG_ON ((NR_CPUS *sizeof (u16)) > (PAGE_SIZE -64 )); +BUILD_BUG_ON ((NR_CPUS *sizeof (u16)) >PAGE_SIZE ); + +/* Make sure mondo block is 64byte aligned */ + p =kzalloc (127 ,GFP_KERNEL ); +if (!p) { +prom_printf ("SUN4V: Error, cannot allocate mondo block.\n" ); +prom_halt (); + } + mondo = (void *)(((unsigned long )p +63 ) & ~0x3f ); + tb->cpu_mondo_block_pa =__pa (mondo); page =get_zeroed_page (GFP_KERNEL );if (!page) { -prom_printf ("SUN4V: Error, cannot allocate cpu mondo page.\n" ); +prom_printf ("SUN4V: Error, cannot allocate cpu list page.\n" );prom_halt (); } - tb->cpu_mondo_block_pa =__pa (page); - tb->cpu_list_pa =__pa (page +64 ); + tb->cpu_list_pa =__pa (page);#endif }
Greg Kroah-Hartman
maintainerPATCH 19/90 serial: ifx6x60: fix use-after-free on module unload
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 1e948479b3d63e3ac0ecca13cbf4921c7d17c168 upstream.
Make sure to deregister the SPI driver before releasing the tty driver to avoid use-after-free in the SPI remove callback where the tty devices are deregistered.
--- drivers/tty/serial/ifx6x60.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/serial/ifx6x60.c +1 -1
@@ -1378,9 +1378,9 @@ static struct spi_driver ifx_spi_driver static void __exit ifx_spi_exit(void) {/* unregister */ +spi_unregister_driver (&ifx_spi_driver);tty_unregister_driver (tty_drv);put_tty_driver (tty_drv); -spi_unregister_driver (&ifx_spi_driver);unregister_reboot_notifier (&ifx_modem_reboot_notifier_block); }
Greg Kroah-Hartman
maintainerPATCH 20/90 ptrace: Properly initialize ptracer_cred on fork
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman <[email protected]>
commit c70d9d809fdeecedb96972457ee45c49a232d97f upstream.
When I introduced ptracer_cred I failed to consider the weirdness of fork where the task_struct copies the old value by default. This winds up leaving ptracer_cred set even when a process forks and the child process does not wind up being ptraced.
Because ptracer_cred is not set on non-ptraced processes whose parents were ptraced this has broken the ability of the enlightenment window manager to start setuid children.
Fix this by properly initializing ptracer_cred in ptrace_init_task
This must be done with a little bit of care to preserve the current value of ptracer_cred when ptrace carries through fork. Re-reading the ptracer_cred from the ptracing process at this point is inconsistent with how PT_PTRACE_CAP has been maintained all of these years.
--- include/linux/ptrace.h | 7 +++++-- kernel/ptrace.c | 20 +++++++++++++------- 2 files changed, 18 insertions(+), 9 deletions(-)
include/linux/ptrace.h +5 -2
@@ -50,7 +50,8 @@ extern int ptrace_request(struct task_st unsigned long addr, unsigned long data);extern void ptrace_notify (int exit_code);extern void __ptrace_link (struct task_struct *child, -struct task_struct *new_parent); +struct task_struct *new_parent, +const struct cred *ptracer_cred);extern void __ptrace_unlink (struct task_struct *child);extern void exit_ptrace (struct task_struct *tracer,struct list_head *dead);#define PTRACE_MODE_READ 0x01
@@ -202,7 +203,7 @@ static inline void ptrace_init_task(struif (unlikely (ptrace) && current->ptrace) { child->ptrace = current->ptrace; -__ptrace_link (child, current->parent); +__ptrace_link (child, current->parent, current->ptracer_cred);if (child->ptrace &PT_SEIZED )task_set_jobctl_pending (child,JOBCTL_TRAP_STOP );
@@ -211,6 +212,8 @@ static inline void ptrace_init_task(struset_tsk_thread_flag (child,TIF_SIGPENDING ); } +else + child->ptracer_cred =NULL ; }/**
kernel/ptrace.c +13 -7
@@ -28,19 +28,25 @@#include <linux/compat.h> +void __ptrace_link (struct task_struct *child,struct task_struct *new_parent, +const struct cred *ptracer_cred) +{ +BUG_ON (!list_empty (&child->ptrace_entry)); +list_add (&child->ptrace_entry, &new_parent->ptraced); + child->parent = new_parent; + child->ptracer_cred =get_cred (ptracer_cred); +} +/* * ptrace a task: make the debugger its new parent and * move it to the ptrace list. * * Must be called with the tasklist lock write-held. */ -void __ptrace_link (struct task_struct *child,struct task_struct *new_parent) +static void ptrace_link (struct task_struct *child,struct task_struct *new_parent) { -BUG_ON (!list_empty (&child->ptrace_entry)); -list_add (&child->ptrace_entry, &new_parent->ptraced); - child->parent = new_parent;rcu_read_lock (); - child->ptracer_cred =get_cred (__task_cred (new_parent)); +__ptrace_link (child, new_parent,__task_cred (new_parent));rcu_read_unlock (); }
@@ -353,7 +359,7 @@ static int ptrace_attach(struct task_str flags |=PT_SEIZED ; task->ptrace = flags; -__ptrace_link (task, current); +ptrace_link (task, current);/* SEIZE doesn't trap tracee on attach */ if (!seize)
@@ -420,7 +426,7 @@ static int ptrace_traceme(void)*/ if (!ret && !(current->real_parent->flags &PF_EXITING )) { current->ptrace =PT_PTRACED ; -__ptrace_link (current, current->real_parent); +ptrace_link (current, current->real_parent); } }write_unlock_irq (&tasklist_lock);
Greg Kroah-Hartman
maintainerPATCH 21/90 KEYS: fix dereferencing NULL payload with nonzero length
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit 5649645d725c73df4302428ee4e02c869248b4c5 upstream.
sys_add_key() and the KEYCTL_UPDATE operation of sys_keyctl() allowed a NULL payload with nonzero length to be passed to the key type's ->preparse(), ->instantiate(), and/or ->update() methods. Various key types including asymmetric, cifs.idmap, cifs.spnego, and pkcs7_test did not handle this case, allowing an unprivileged user to trivially cause a NULL pointer dereference (kernel oops) if one of these key types was present. Fix it by doing the copy_from_user() when 'plen' is nonzero rather than when '_payload' is non-NULL, causing the syscall to fail with EFAULT as expected when an invalid buffer is specified.
--- security/keys/keyctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
security/keys/keyctl.c +2 -2
@@ -97,7 +97,7 @@ SYSCALL_DEFINE5(add_key, const char __us/* pull the payload in if one was supplied */ payload =NULL ; -if (_payload) { +if (plen) { ret = -ENOMEM ; payload =kmalloc (plen,GFP_KERNEL | __GFP_NOWARN);if (!payload) {
@@ -327,7 +327,7 @@ long keyctl_update_key(key_serial_t id,/* pull the payload in if one was supplied */ payload =NULL ; -if (_payload) { +if (plen) { ret = -ENOMEM ; payload =kmalloc (plen,GFP_KERNEL );if (!payload)
Greg Kroah-Hartman
maintainerPATCH 22/90 KEYS: fix freeing uninitialized memory in key_update()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit 63a0b0509e700717a59f049ec6e4e04e903c7fe2 upstream.
key_update() freed the key_preparsed_payload even if it was not initialized first. This would cause a crash if userspace called keyctl_update() on a key with type like "asymmetric" that has a ->preparse() method but not an ->update() method. Possibly it could even be triggered for other key types by racing with keyctl_setperm() to make the KEY_NEED_WRITE check fail (the permission was already checked, so normally it wouldn't fail there).
Reproducer with key type "asymmetric", given a valid cert.der:
keyctl new_session
keyid=$(keyctl padd asymmetric desc @s < cert.der) keyctl setperm $keyid 0x3f000000
keyctl update $keyid data
[ 150.686666] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 [ 150.687601] IP: asymmetric_key_free_kids+0x12/0x30 [ 150.688139] PGD 38a3d067 [ 150.688141] PUD 3b3de067 [ 150.688447] PMD 0 [ 150.688745] [ 150.689160] Oops: 0000 [#1] SMP [ 150.689455] Modules linked in: [ 150.689769] CPU: 1 PID: 2478 Comm: keyctl Not tainted 4.11.0-rc4-xfstests-00187-ga9f6b6b8cd2f #742 [ 150.690916] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 [ 150.692199] task: ffff88003b30c480 task.stack: ffffc90000350000 [ 150.692952] RIP: 0010:asymmetric_key_free_kids+0x12/0x30 [ 150.693556] RSP: 0018:ffffc90000353e58 EFLAGS: 00010202 [ 150.694142] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000004 [ 150.694845] RDX: ffffffff81ee3920 RSI: ffff88003d4b0700 RDI: 0000000000000001 [ 150.697569] RBP: ffffc90000353e60 R08: ffff88003d5d2140 R09: 0000000000000000 [ 150.702483] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 150.707393] R13: 0000000000000004 R14: ffff880038a4d2d8 R15: 000000000040411f [ 150.709720] FS: 00007fcbcee35700(0000) GS:ffff88003fd00000(0000) knlGS:0000000000000000 [ 150.711504] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 150.712733] CR2: 0000000000000001 CR3: 0000000039eab000 CR4: 00000000003406e0 [ 150.714487] Call Trace: [ 150.714975] asymmetric_key_free_preparse+0x2f/0x40 [ 150.715907] key_update+0xf7/0x140 [ 150.716560] ? key_default_cmp+0x20/0x20 [ 150.717319] keyctl_update_key+0xb0/0xe0 [ 150.718066] SyS_keyctl+0x109/0x130 [ 150.718663] entry_SYSCALL_64_fastpath+0x1f/0xc2 [ 150.719440] RIP: 0033:0x7fcbce75ff19 [ 150.719926] RSP: 002b:00007ffd5d167088 EFLAGS: 00000206 ORIG_RAX: 00000000000000fa [ 150.720918] RAX: ffffffffffffffda RBX: 0000000000404d80 RCX: 00007fcbce75ff19 [ 150.721874] RDX: 00007ffd5d16785e RSI: 000000002866cd36 RDI: 0000000000000002 [ 150.722827] RBP: 0000000000000006 R08: 000000002866cd36 R09: 00007ffd5d16785e [ 150.723781] R10: 0000000000000004 R11: 0000000000000206 R12: 0000000000404d80 [ 150.724650] R13: 00007ffd5d16784d R14: 00007ffd5d167238 R15: 000000000040411f [ 150.725447] Code: 83 c4 08 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 85 ff 74 23 55 48 89 e5 53 48 89 fb <48> 8b 3f e8 06 21 c5 ff 48 8b 7b 08 e8 fd 20 c5 ff 48 89 df e8 [ 150.727489] RIP: asymmetric_key_free_kids+0x12/0x30 RSP: ffffc90000353e58 [ 150.728117] CR2: 0000000000000001 [ 150.728430] ---[ end trace f7f8fe1da2d5ae8d ]---
--- security/keys/key.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
security/keys/key.c +2 -3
@@ -934,12 +934,11 @@ int key_update(key_ref_t key_ref, const/* the key must be writable */ ret =key_permission (key_ref,KEY_NEED_WRITE );if (ret <0 ) - goto error; +return ret;/* attempt to update it if supported */ - ret = -EOPNOTSUPP ;if (!key->type->update) - goto error; +return -EOPNOTSUPP ;memset (&prep,0 ,sizeof (prep)); prep.data = payload;
Greg Kroah-Hartman
maintainerPATCH 23/90 crypto: gcm - wait for crypto op not signal safe
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gilad Ben-Yossef <[email protected]>
commit f3ad587070d6bd961ab942b3fd7a85d00dfc934b upstream.
crypto_gcm_setkey() was using wait_for_completion_interruptible() to wait for completion of async crypto op but if a signal occurs it may return before DMA ops of HW crypto provider finish, thus corrupting the data buffer that is kfree'ed in this case.
Resolve this by using wait_for_completion() instead.
--- crypto/gcm.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
crypto/gcm.c +2 -4
@@ -152,10 +152,8 @@ static int crypto_gcm_setkey(struct cryp err =crypto_ablkcipher_encrypt (&data->req);if (err == -EINPROGRESS || err == -EBUSY ) { - err =wait_for_completion_interruptible ( - &data->result.completion); -if (!err) - err = data->result.err; +wait_for_completion (&data->result.completion); + err = data->result.err; }if (err)
Greg Kroah-Hartman
maintainerPATCH 25/90 nfsd4: fix null dereference on replay
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: J. Bruce Fields <[email protected]>
commit 9a307403d374b993061f5992a6e260c944920d0b upstream.
if we receive a compound such that:
- the sessionid, slot, and sequence number in the SEQUENCE op match a cached succesful reply with N ops, and
- the Nth operation of the compound is a PUTFH, PUTPUBFH, PUTROOTFH, or RESTOREFH,
then nfsd4_sequence will return 0 and set cstate->status to nfserr_replay_cache. The current filehandle will not be set. This will cause us to call check_nfsd_access with first argument NULL.
To nfsd4_compound it looks like we just succesfully executed an operation that set a filehandle, but the current filehandle is not set.
Fix this by moving the nfserr_replay_cache earlier. There was never any reason to have it after the encode_op label, since the only case where he hit that is when opdesc->op_func sets it.
Note that there are two ways we could hit this case:
- a client is resending a previously sent compound that ended with one of the four PUTFH-like operations, or
- a client is sending a *new* compound that (incorrectly) shares sessionid, slot, and sequence number with a previously sent compound, and the length of the previously sent compound happens to match the position of a PUTFH-like operation in the new compound.
The second is obviously incorrect client behavior. The first is also very strange--the only purpose of a PUTFH-like operation is to set the current filehandle to be used by the following operation, so there's no point in having it as the last in a compound.
So it's likely this requires a buggy or malicious client to reproduce.
--- fs/nfsd/nfs4proc.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
fs/nfsd/nfs4proc.c +6 -7
@@ -1690,6 +1690,12 @@ nfsd4_proc_compound(struct svc_rqst *rqs opdesc->op_get_currentstateid (cstate, &op->u); op->status = opdesc->op_func (rqstp, cstate, &op->u); +/* Only from SEQUENCE */ +if (cstate->status == nfserr_replay_cache) { +dprintk ("%s NFS4.1 replay from cache\n" , __func__); + status = op->status; + goto out; + }if (!op->status) {if (opdesc->op_set_currentstateid) opdesc->op_set_currentstateid (cstate, &op->u);
@@ -1700,14 +1706,7 @@ nfsd4_proc_compound(struct svc_rqst *rqsif (need_wrongsec_check (rqstp)) op->status =check_nfsd_access (current_fh->fh_export, rqstp); } - encode_op: -/* Only from SEQUENCE */ -if (cstate->status == nfserr_replay_cache) { -dprintk ("%s NFS4.1 replay from cache\n" , __func__); - status = op->status; - goto out; - }if (op->status == nfserr_replay_me) { op->replay = &cstate->replay_owner->so_replay;nfsd4_encode_replay (&resp->xdr, op);
Greg Kroah-Hartman
maintainerPATCH 26/90 nfsd: Fix up the "supattr_exclcreat" attributes
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit b26b78cb726007533d81fdf90a62e915002ef5c8 upstream.
If an NFSv4 client asks us for the supattr_exclcreat, then we must not return attributes that are unsupported by this minor version.
--- fs/nfsd/nfs4xdr.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
fs/nfsd/nfs4xdr.c +10 -3
@@ -2753,9 +2753,16 @@ out_acl: }#endif /* CONFIG_NFSD_PNFS */ if (bmval2 &FATTR4_WORD2_SUPPATTR_EXCLCREAT ) { - status =nfsd4_encode_bitmap (xdr,NFSD_SUPPATTR_EXCLCREAT_WORD0 , -NFSD_SUPPATTR_EXCLCREAT_WORD1 , -NFSD_SUPPATTR_EXCLCREAT_WORD2 ); +u32 supp[3 ]; + + supp[0 ] =nfsd_suppattrs0 (minorversion); + supp[1 ] =nfsd_suppattrs1 (minorversion); + supp[2 ] =nfsd_suppattrs2 (minorversion); + supp[0 ] &=NFSD_SUPPATTR_EXCLCREAT_WORD0 ; + supp[1 ] &=NFSD_SUPPATTR_EXCLCREAT_WORD1 ; + supp[2 ] &=NFSD_SUPPATTR_EXCLCREAT_WORD2 ; + + status =nfsd4_encode_bitmap (xdr, supp[0 ], supp[1 ], supp[2 ]);if (status) goto out; }
Greg Kroah-Hartman
maintainerPATCH 29/90 arm: KVM: Allow unaligned accesses at HYP
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Zyngier <[email protected]>
commit 33b5c38852b29736f3b472dd095c9a18ec22746f upstream.
We currently have the HSCTLR.A bit set, trapping unaligned accesses at HYP, but we're not really prepared to deal with it.
Since the rest of the kernel is pretty happy about that, let's follow its example and set HSCTLR.A to zero. Modern CPUs don't really care.
--- arch/arm/kvm/init.S | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
arch/arm/kvm/init.S +2 -3
@@ -110,7 +110,6 @@ __do_hyp_init: @ - Write permission implies XN: disabled @ - Instruction cache: enabled @ - Data/Unified cache: enabled - @ - Memory alignment checks: enabled @ - MMU: enabled (this code must be run from an identity mapping) mrc p15, 4, r0, c1, c0, 0 @ HSCR ldr r2, =HSCTLR_MASK
@@ -118,8 +117,8 @@ __do_hyp_init: mrc p15, 0, r1, c1, c0, 0 @ SCTLR ldr r2, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C) and r1, r1, r2 - ARM( ldr r2, =(HSCTLR_M | HSCTLR_A) ) - THUMB( ldr r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) ) + ARM( ldr r2, =(HSCTLR_M) ) + THUMB( ldr r2, =(HSCTLR_M | HSCTLR_TE) ) orr r1, r1, r2 orr r0, r0, r1 isb
Greg Kroah-Hartman
maintainerPATCH 31/90 dmaengine: usb-dmac: Fix DMAOR AE bit definition
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hiroyuki Yokoyama <[email protected]>
commit 9a445bbb1607d9f14556a532453dd86d1b7e381e upstream.
This patch fixes the register definition of AE (Address Error flag) bit.
--- drivers/dma/sh/usb-dmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma/sh/usb-dmac.c +1 -1
@@ -117,7 +117,7 @@ struct usb_dmac {#define USB_DMASWR 0x0008#define USB_DMASWR_SWR (1 << 0)#define USB_DMAOR 0x0060 -#define USB_DMAOR_AE (1 << 2) +#define USB_DMAOR_AE (1 << 1)#define USB_DMAOR_DME (1 << 0)#define USB_DMASAR 0x0000
Greg Kroah-Hartman
maintainerPATCH 32/90 dmaengine: ep93xx: Always start from BASE0
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Sverdlin <[email protected]>
commit 0037ae47812b1f431cc602100d1d51f37d77b61e upstream.
The current buffer is being reset to zero on device_free_chan_resources() but not on device_terminate_all(). It could happen that HW is restarted and expects BASE0 to be used, but the driver is not synchronized and will start from BASE1. One solution is to reset the buffer explicitly in m2p_hw_setup().
--- drivers/dma/ep93xx_dma.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/dma/ep93xx_dma.c +2 -0
@@ -325,6 +325,8 @@ static int m2p_hw_setup(struct ep93xx_dm | M2P_CONTROL_ENABLE;m2p_set_control (edmac, control); + edmac->buffer =0 ; +return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 33/90 xen/privcmd: Support correctly 64KB page granularity when mapping memory
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julien Grall <[email protected]>
commit 753c09b5652bb4fe53e2db648002ec64b32b8827 upstream.
Commit 5995a68 "xen/privcmd: Add support for Linux 64KB page granularity" did not go far enough to support 64KB in mmap_batch_fn.
The variable 'nr' is the number of 4KB chunk to map. However, when Linux is using 64KB page granularity the array of pages (vma->vm_private_data) contain one page per 64KB. Fix it by incrementing st->index correctly.
Furthermore, st->va is not correctly incremented as PAGE_SIZE != XEN_PAGE_SIZE.
--- drivers/xen/privcmd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/xen/privcmd.c +2 -2
@@ -335,8 +335,8 @@ static int mmap_batch_fn(void *data, int st->global_error =1 ; } } - st->va +=PAGE_SIZE * nr; - st->index += nr; + st->va +=XEN_PAGE_SIZE * nr; + st->index += nr /XEN_PFN_PER_PAGE ;return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 34/90 xen-netfront: do not cast grant table reference to signed short
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dongli Zhang <[email protected]>
commit 87557efc27f6a50140fb20df06a917f368ce3c66 upstream.
While grant reference is of type uint32_t, xen-netfront erroneously casts it to signed short in BUG_ON().
This would lead to the xen domU panic during boot-up or migration when it is attached with lots of paravirtual devices.
--- drivers/net/xen-netfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/xen-netfront.c +2 -2
@@ -304,7 +304,7 @@ static void xennet_alloc_rx_buffers(stru queue->rx_skbs[id] = skb; ref =gnttab_claim_grant_reference (&queue->gref_rx_head); -BUG_ON ((signed short )ref <0 ); +WARN_ON_ONCE (IS_ERR_VALUE ((unsigned long )ref)); queue->grant_rx_ref[id] = ref; page =skb_frag_page (&skb_shinfo (skb)->frags[0 ]);
@@ -437,7 +437,7 @@ static void xennet_tx_setup_grant(unsign id =get_id_from_freelist (&queue->tx_skb_freelist, queue->tx_skbs); tx =RING_GET_REQUEST (&queue->tx, queue->tx.req_prod_pvt++); ref =gnttab_claim_grant_reference (&queue->gref_tx_head); -BUG_ON ((signed short )ref <0 ); +WARN_ON_ONCE (IS_ERR_VALUE ((unsigned long )ref));gnttab_grant_foreign_access_ref (ref, queue->info->xbdev->otherend_id, gfn, GNTMAP_readonly);
Greg Kroah-Hartman
maintainerPATCH 35/90 xen-netfront: cast grant table reference first to type int
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dongli Zhang <[email protected]>
commit 269ebce4531b8edc4224259a02143181a1c1d77c upstream.
IS_ERR_VALUE() in commit 87557efc27f6a50140fb20df06a917f368ce3c66 ("xen-netfront: do not cast grant table reference to signed short") would not return true for error code unless we cast ref first to type int.
--- drivers/net/xen-netfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/xen-netfront.c +2 -2
@@ -304,7 +304,7 @@ static void xennet_alloc_rx_buffers(stru queue->rx_skbs[id] = skb; ref =gnttab_claim_grant_reference (&queue->gref_rx_head); -WARN_ON_ONCE (IS_ERR_VALUE ((unsigned long )ref)); +WARN_ON_ONCE (IS_ERR_VALUE ((unsigned long )(int )ref)); queue->grant_rx_ref[id] = ref; page =skb_frag_page (&skb_shinfo (skb)->frags[0 ]);
@@ -437,7 +437,7 @@ static void xennet_tx_setup_grant(unsign id =get_id_from_freelist (&queue->tx_skb_freelist, queue->tx_skbs); tx =RING_GET_REQUEST (&queue->tx, queue->tx.req_prod_pvt++); ref =gnttab_claim_grant_reference (&queue->gref_tx_head); -WARN_ON_ONCE (IS_ERR_VALUE ((unsigned long )ref)); +WARN_ON_ONCE (IS_ERR_VALUE ((unsigned long )(int )ref));gnttab_grant_foreign_access_ref (ref, queue->info->xbdev->otherend_id, gfn, GNTMAP_readonly);
Greg Kroah-Hartman
maintainerPATCH 36/90 ext4: fix SEEK_HOLE
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit 7d95eddf313c88b24f99d4ca9c2411a4b82fef33 upstream.
Currently, SEEK_HOLE implementation in ext4 may both return that there's a hole at some offset although that offset already has data and skip some holes during a search for the next hole. The first problem is demostrated by:
xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "seek -h 0" file wrote 57344/57344 bytes at offset 0
56 KiB, 14 ops; 0.0000 sec (2.054 GiB/sec and 538461.5385 ops/sec)
Whence Result
HOLE 0
Where we can see that SEEK_HOLE wrongly returned offset 0 as containing a hole although we have written data there. The second problem can be demonstrated by:
xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "pwrite 128k 8k"
-c "seek -h 0" file
wrote 57344/57344 bytes at offset 0
56 KiB, 14 ops; 0.0000 sec (1.978 GiB/sec and 518518.5185 ops/sec) wrote 8192/8192 bytes at offset 131072
8 KiB, 2 ops; 0.0000 sec (2 GiB/sec and 500000.0000 ops/sec)
Whence Result
HOLE 139264
Where we can see that hole at offsets 56k..128k has been ignored by the SEEK_HOLE call.
The underlying problem is in the ext4_find_unwritten_pgoff() which is just buggy. In some cases it fails to update returned offset when it finds a hole (when no pages are found or when the first found page has higher index than expected), in some cases conditions for detecting hole are just missing (we fail to detect a situation where indices of returned pages are not contiguous).
Fix ext4_find_unwritten_pgoff() to properly detect non-contiguous page indices and also handle all cases where we got less pages then expected in one place and handle it properly there.
--- fs/ext4/file.c | 50 ++++++++++++++------------------------------------ 1 file changed, 14 insertions(+), 36 deletions(-)
fs/ext4/file.c +14 -36
@@ -463,47 +463,27 @@ static int ext4_find_unwritten_pgoff(str num =min_t (pgoff_t, end - index,PAGEVEC_SIZE ); nr_pages =pagevec_lookup (&pvec, inode->i_mapping, index, (pgoff_t )num); -if (nr_pages ==0 ) { -if (whence ==SEEK_DATA ) -break ; - -BUG_ON (whence !=SEEK_HOLE ); -/* -* If this is the first time to go into the loop and -* offset is not beyond the end offset, it will be a -* hole at this offset -*/ -if (lastoff == startoff || lastoff < endoff) - found =1 ; +if (nr_pages ==0 )break ; - } - -/* -* If this is the first time to go into the loop and -* offset is smaller than the first page offset, it will be a -* hole at this offset. -*/ -if (lastoff == startoff && whence ==SEEK_HOLE && - lastoff <page_offset (pvec.pages[0 ])) { - found =1 ; -break ; - }for (i =0 ; i < nr_pages; i++) {struct page *page = pvec.pages[i];struct buffer_head *bh, *head;/* -* If the current offset is not beyond the end of given -* range, it will be a hole. +* If current offset is smaller than the page offset, +* there is a hole at this offset. */ -if (lastoff < endoff && whence ==SEEK_HOLE && - page->index > end) { +if (whence ==SEEK_HOLE && lastoff < endoff && + lastoff <page_offset (pvec.pages[i])) { found =1 ; *offset = lastoff; goto out; } +if (page->index > end) + goto out; +lock_page (page);if (unlikely (page->mapping != inode->i_mapping)) {
@@ -543,20 +523,18 @@ static int ext4_find_unwritten_pgoff(strunlock_page (page); } -/* -* The no. of pages is less than our desired, that would be a -* hole in there. -*/ -if (nr_pages < num && whence ==SEEK_HOLE ) { - found =1 ; - *offset = lastoff; +/* The no. of pages is less than our desired, we are done. */ +if (nr_pages < num)break ; - } index = pvec.pages[i -1 ]->index +1 ;pagevec_release (&pvec); }while (index <= end); +if (whence ==SEEK_HOLE && lastoff < endoff) { + found =1 ; + *offset = lastoff; + } out:pagevec_release (&pvec);return found;
Greg Kroah-Hartman
maintainerPATCH 37/90 ext4: keep existing extra fields when inode expands
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Khlebnikov <[email protected]>
commit 887a9730614727c4fff7cb756711b190593fc1df upstream.
ext4_expand_extra_isize() should clear only space between old and new size.
--- fs/ext4/inode.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
fs/ext4/inode.c +3 -2
@@ -5162,8 +5162,9 @@ static int ext4_expand_extra_isize(struc/* No extended attributes present */ if (!ext4_test_inode_state (inode,EXT4_STATE_XATTR ) || header->h_magic !=cpu_to_le32 (EXT4_XATTR_MAGIC )) { -memset ((void *)raw_inode +EXT4_GOOD_OLD_INODE_SIZE ,0 , - new_extra_isize); +memset ((void *)raw_inode +EXT4_GOOD_OLD_INODE_SIZE + +EXT4_I (inode)->i_extra_isize,0 , + new_extra_isize -EXT4_I (inode)->i_extra_isize);EXT4_I (inode)->i_extra_isize = new_extra_isize;return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 38/90 ext4: fix fdatasync(2) after extent manipulation operations
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit 67a7d5f561f469ad2fa5154d2888258ab8e6df7c upstream.
Currently, extent manipulation operations such as hole punch, range zeroing, or extent shifting do not record the fact that file data has changed and thus fdatasync(2) has a work to do. As a result if we crash e.g. after a punch hole and fdatasync, user can still possibly see the punched out data after journal replay. Test generic/392 fails due to these problems.
Fix the problem by properly marking that file data has changed in these operations.
--- fs/ext4/extents.c | 5 +++++ fs/ext4/inode.c | 2 ++ 2 files changed, 7 insertions(+)
fs/ext4/extents.c +5 -0
@@ -4902,6 +4902,8 @@ static long ext4_zero_range(struct file/* Zero out partial block at the edges of the range */ ret =ext4_zero_partial_blocks (handle, inode, offset, len); +if (ret >=0 ) +ext4_update_inode_fsync_trans (handle, inode,1 );if (file->f_flags &O_SYNC )ext4_handle_sync (handle);
@@ -5597,6 +5599,7 @@ int ext4_collapse_range(struct inode *inext4_handle_sync (handle); inode->i_mtime = inode->i_ctime =ext4_current_time (inode);ext4_mark_inode_dirty (handle, inode); +ext4_update_inode_fsync_trans (handle, inode,1 ); out_stop:ext4_journal_stop (handle);
@@ -5770,6 +5773,8 @@ int ext4_insert_range(struct inode *inodup_write (&EXT4_I (inode)->i_data_sem);if (IS_SYNC (inode))ext4_handle_sync (handle); +if (ret >=0 ) +ext4_update_inode_fsync_trans (handle, inode,1 ); out_stop:ext4_journal_stop (handle);
fs/ext4/inode.c +2 -0
@@ -3793,6 +3793,8 @@ int ext4_punch_hole(struct inode *inode, inode->i_mtime = inode->i_ctime =ext4_current_time (inode);ext4_mark_inode_dirty (handle, inode); +if (ret >=0 ) +ext4_update_inode_fsync_trans (handle, inode,1 ); out_stop:ext4_journal_stop (handle); out_dio:
Greg Kroah-Hartman
maintainerPATCH 39/90 usb: gadget: f_mass_storage: Serialize wake and sleep execution
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thinh Nguyen <[email protected]>
commit dc9217b69dd6089dcfeb86ed4b3c671504326087 upstream.
f_mass_storage has a memorry barrier issue with the sleep and wake functions that can cause a deadlock. This results in intermittent hangs during MSC file transfer. The host will reset the device after receiving no response to resume the transfer. This issue is seen when dwc3 is processing 2 transfer-in-progress events at the same time, invoking completion handlers for CSW and CBW. Also this issue occurs depending on the system timing and latency.
To increase the chance to hit this issue, you can force dwc3 driver to wait and process those 2 events at once by adding a small delay (~100us) in dwc3_check_event_buf() whenever the request is for CSW and read the event count again. Avoid debugging with printk and ftrace as extra delays and memory barrier will mask this issue.
Scenario which can lead to failure:
-----------------------------------
1) The main thread sleeps and waits for the next command in get_next_command().
2) bulk_in_complete() wakes up main thread for CSW.
3) bulk_out_complete() tries to wake up the running main thread for CBW.
4) thread_wakeup_needed is not loaded with correct value in sleep_thread().
5) Main thread goes to sleep again.
The pattern is shown below. Note the 2 critical variables.
* common->thread_wakeup_needed
* bh->state
CPU 0 (sleep_thread) CPU 1 (wakeup_thread) ============================== =============================== bh->state = BH_STATE_FULL; smp_wmb(); thread_wakeup_needed = 0; thread_wakeup_needed = 1; smp_rmb(); if (bh->state != BH_STATE_FULL) sleep again ...
As pointed out by Alan Stern, this is an R-pattern issue. The issue can be seen when there are two wakeups in quick succession. The thread_wakeup_needed can be overwritten in sleep_thread, and the read of the bh->state maybe reordered before the write to thread_wakeup_needed.
This patch applies full memory barrier smp_mb() in both sleep_thread() and wakeup_thread() to ensure the order which the thread_wakeup_needed and bh->state are written and loaded.
However, a better solution in the future would be to use wait_queue method that takes care of managing memory barrier between waker and waiter.
--- drivers/usb/gadget/function/f_mass_storage.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
drivers/usb/gadget/function/f_mass_storage.c +11 -2
@@ -399,7 +399,11 @@ static int fsg_set_halt(struct fsg_dev */* Caller must hold fsg->lock */ static void wakeup_thread (struct fsg_common *common) { -smp_wmb ();/* ensure the write of bh->state is complete */ +/* +* Ensure the reading of thread_wakeup_needed +* and the writing of bh->state are completed +*/ +smp_mb ();/* Tell the main thread that something has happened */ common->thread_wakeup_needed =1 ;if (common->thread_task)
@@ -630,7 +634,12 @@ static int sleep_thread(struct fsg_commo }__set_current_state (TASK_RUNNING ); common->thread_wakeup_needed =0 ; -smp_rmb ();/* ensure the latest bh->state is visible */ + +/* +* Ensure the writing of thread_wakeup_needed +* and the reading of bh->state are completed +*/ +smp_mb ();return rc; }
Greg Kroah-Hartman
maintainerPATCH 40/90 usb: chipidea: udc: fix NULL pointer dereference if udc_start failed
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jisheng Zhang <[email protected]>
commit aa1f058d7d9244423b8c5a75b9484b1115df7f02 upstream.
Fix below NULL pointer dereference. we set ci->roles[CI_ROLE_GADGET] too early in ci_hdrc_gadget_init(), if udc_start() fails due to some reason, the ci->roles[CI_ROLE_GADGET] check in ci_hdrc_gadget_destroy can't protect us.
We fix this issue by only setting ci->roles[CI_ROLE_GADGET] if udc_start() succeed.
[ 1.398550] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 1.448600] PC is at dma_pool_free+0xb8/0xf0 [ 1.453012] LR is at dma_pool_free+0x28/0xf0 [ 2.113369] [<ffffff80081817d8>] dma_pool_free+0xb8/0xf0 [ 2.118857] [<ffffff800841209c>] destroy_eps+0x4c/0x68 [ 2.124165] [<ffffff8008413770>] ci_hdrc_gadget_destroy+0x28/0x50 [ 2.130461] [<ffffff800840fa30>] ci_hdrc_probe+0x588/0x7e8 [ 2.136129] [<ffffff8008380fb8>] platform_drv_probe+0x50/0xb8 [ 2.142066] [<ffffff800837f494>] driver_probe_device+0x1fc/0x2a8 [ 2.148270] [<ffffff800837f68c>] __device_attach_driver+0x9c/0xf8 [ 2.154563] [<ffffff800837d570>] bus_for_each_drv+0x58/0x98 [ 2.160317] [<ffffff800837f174>] __device_attach+0xc4/0x138 [ 2.166072] [<ffffff800837f738>] device_initial_probe+0x10/0x18 [ 2.172185] [<ffffff800837e58c>] bus_probe_device+0x94/0xa0 [ 2.177940] [<ffffff800837c560>] device_add+0x3f0/0x560 [ 2.183337] [<ffffff8008380d20>] platform_device_add+0x180/0x240 [ 2.189541] [<ffffff800840f0e8>] ci_hdrc_add_device+0x440/0x4f8 [ 2.195654] [<ffffff8008414194>] ci_hdrc_usb2_probe+0x13c/0x2d8 [ 2.201769] [<ffffff8008380fb8>] platform_drv_probe+0x50/0xb8 [ 2.207705] [<ffffff800837f494>] driver_probe_device+0x1fc/0x2a8 [ 2.213910] [<ffffff800837f5ec>] __driver_attach+0xac/0xb0 [ 2.219575] [<ffffff800837d4b0>] bus_for_each_dev+0x60/0xa0 [ 2.225329] [<ffffff800837ec80>] driver_attach+0x20/0x28 [ 2.230816] [<ffffff800837e880>] bus_add_driver+0x1d0/0x238 [ 2.236571] [<ffffff800837fdb0>] driver_register+0x60/0xf8 [ 2.242237] [<ffffff8008380ef4>] __platform_driver_register+0x44/0x50 [ 2.248891] [<ffffff80086fd440>] ci_hdrc_usb2_driver_init+0x18/0x20 [ 2.255365] [<ffffff8008082950>] do_one_initcall+0x38/0x128 [ 2.261121] [<ffffff80086e0d00>] kernel_init_freeable+0x1ac/0x250 [ 2.267414] [<ffffff800852f0b8>] kernel_init+0x10/0x100 [ 2.272810] [<ffffff8008082680>] ret_from_fork+0x10/0x50
--- drivers/usb/chipidea/udc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/usb/chipidea/udc.c +6 -2
@@ -1982,6 +1982,7 @@ static void udc_id_switch_for_host(strucint ci_hdrc_gadget_init (struct ci_hdrc *ci) {struct ci_role_driver *rdrv; +int ret;if (!hw_read (ci,CAP_DCCPARAMS ,DCCPARAMS_DC ))return -ENXIO ;
@@ -1994,7 +1995,10 @@ int ci_hdrc_gadget_init(struct ci_hdrc * rdrv->stop = udc_id_switch_for_host; rdrv->irq = udc_irq; rdrv->name ="gadget" ; - ci->roles[CI_ROLE_GADGET ] = rdrv; -return udc_start (ci); + ret =udc_start (ci); +if (!ret) + ci->roles[CI_ROLE_GADGET ] = rdrv; + +return ret; }
Greg Kroah-Hartman
maintainerPATCH 41/90 usb: chipidea: debug: check before accessing ci_role
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Thalmeier <[email protected]>
commit 0340ff83cd4475261e7474033a381bc125b45244 upstream.
ci_role BUGs when the role is >= CI_ROLE_END.
--- drivers/usb/chipidea/debug.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/usb/chipidea/debug.c +2 -1
@@ -295,7 +295,8 @@ static int ci_role_show(struct seq_file {struct ci_hdrc *ci = s->private; -seq_printf (s,"%s\n" ,ci_role (ci)->name); +if (ci->role !=CI_ROLE_END ) +seq_printf (s,"%s\n" ,ci_role (ci)->name);return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 42/90 staging/lustre/lov: remove set_fs() call from lov_getstripe()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleg Drokin <[email protected]>
commit 0a33252e060e97ed3fbdcec9517672f1e91aaef3 upstream.
lov_getstripe() calls set_fs(KERNEL_DS) so that it can handle a struct lov_user_md pointer from user- or kernel-space. This changes the behavior of copy_from_user() on SPARC and may result in a misaligned access exception which in turn oopses the kernel. In fact the relevant argument to lov_getstripe() is never called with a kernel-space pointer and so changing the address limits is unnecessary and so we remove the calls to save, set, and restore the address limits.
Reviewed-on: http://review.whamcloud.com/6150
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3221
--- drivers/staging/lustre/lustre/lov/lov_pack.c | 9 --------- 1 file changed, 9 deletions(-)
drivers/staging/lustre/lustre/lov/lov_pack.c +0 -9
@@ -399,18 +399,10 @@ int lov_getstripe(struct obd_export *expstruct lov_mds_md *lmmk =NULL ;int rc, lmm_size;int lum_size; -mm_segment_t seg;if (!lsm)return -ENODATA ; -/* -* "Switch to kernel segment" to allow copying from kernel space by -* copy_{to,from}_user(). -*/ - seg =get_fs (); -set_fs (KERNEL_DS ); -/* we only need the header part from user space to get lmm_magic and * lmm_stripe_count, (the header part is common to v1 and v3) */ lum_size =sizeof (struct lov_user_md_v1 );
@@ -485,6 +477,5 @@ int lov_getstripe(struct obd_export *expobd_free_diskmd (exp, &lmmk); out_set: -set_fs (seg);return rc; }
Greg Kroah-Hartman
maintainerPATCH 43/90 iio: light: ltr501 Fix interchanged als/ps register field
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Franziska Naepelt <[email protected]>
commit 7cc3bff4efe6164a0c8163331c8aa55454799f42 upstream.
The register mapping for the IIO driver for the Liteon Light and Proximity sensor LTR501 interrupt mode is interchanged (ALS/PS).
There is a register called INTERRUPT register (address 0x8F) Bit 0 represents PS measurement trigger.
Bit 1 represents ALS measurement trigger.
This two bit fields are interchanged within the driver.
see datasheet page 24:
http://optoelectronics.liteon.com/upload/download/DS86-2012-0006/S_110_LTR-501ALS-01_PrelimDS_ver1%5B1%5D.pdf
--- drivers/iio/light/ltr501.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/iio/light/ltr501.c +2 -2
@@ -74,9 +74,9 @@ static const int int_time_mapping[] = {1static const struct reg_field reg_field_it =REG_FIELD (LTR501_ALS_MEAS_RATE ,3 ,4 );static const struct reg_field reg_field_als_intr = -REG_FIELD (LTR501_INTR ,0 ,0 ); -static const struct reg_field reg_field_ps_intr =REG_FIELD (LTR501_INTR ,1 ,1 ); +static const struct reg_field reg_field_ps_intr = +REG_FIELD (LTR501_INTR ,0 ,0 );static const struct reg_field reg_field_als_rate =REG_FIELD (LTR501_ALS_MEAS_RATE ,0 ,2 ); static const struct reg_field reg_field_ps_rate =
Greg Kroah-Hartman
maintainerPATCH 44/90 iio: proximity: as3935: fix AS3935_INT mask
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matt Ranostay <[email protected]>
commit 275292d3a3d62670b1b13484707b74e5239b4bb0 upstream.
AS3935 interrupt mask has been incorrect so valid lightning events would never trigger an buffer event. Also noise interrupt should be BIT(0).
--- drivers/iio/proximity/as3935.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/iio/proximity/as3935.c +2 -2
@@ -40,9 +40,9 @@#define AS3935_AFE_PWR_BIT BIT(0)#define AS3935_INT 0x03 -#define AS3935_INT_MASK 0x07 +#define AS3935_INT_MASK 0x0f#define AS3935_EVENT_INT BIT(3) -#define AS3935_NOISE_INT BIT(1) +#define AS3935_NOISE_INT BIT(0)#define AS3935_DATA 0x07#define AS3935_DATA_MASK 0x3F
Greg Kroah-Hartman
maintainerPATCH 45/90 drivers: char: random: add get_random_long()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Cashman <[email protected]>
commit ec9ee4acd97c0039a61c0ae4f12705767ae62153 upstream.
Commit d07e22597d1d ("mm: mmap: add new /proc tunable for mmap_base ASLR") added the ability to choose from a range of values to use for entropy count in generating the random offset to the mmap_base address.
The maximum value on this range was set to 32 bits for 64-bit x86 systems, but this value could be increased further, requiring more than the 32 bits of randomness provided by get_random_int(), as is already possible for arm64. Add a new function: get_random_long() which more naturally fits with the mmap usage of get_random_int() but operates exactly the same as get_random_int().
Also, fix the shifting constant in mmap_rnd() to be an unsigned long so that values greater than 31 bits generate an appropriate mask without overflow. This is especially important on x86, as its shift instruction uses a 5-bit mask for the shift operand, which meant that any value for mmap_rnd_bits over 31 acts as a no-op and effectively disables mmap_base randomization.
Finally, replace calls to get_random_int() with get_random_long() where appropriate.
This patch (of 2):
Add get_random_long().
--- drivers/char/random.c | 22 ++++++++++++++++++++++ include/linux/random.h | 1 + 2 files changed, 23 insertions(+)
drivers/char/random.c +22 -0
@@ -1825,6 +1825,28 @@ unsigned int get_random_int(void)EXPORT_SYMBOL (get_random_int);/* +* Same as get_random_int(), but returns unsigned long. +*/ +unsigned long get_random_long (void ) +{ +__u32 *hash; +unsigned long ret; + +if (arch_get_random_long (&ret)) +return ret; + + hash =get_cpu_var (get_random_int_hash); + + hash[0 ] += current->pid + jiffies +random_get_entropy (); +md5_transform (hash, random_int_secret); + ret = *(unsigned long *)hash; +put_cpu_var (get_random_int_hash); + +return ret; +} +EXPORT_SYMBOL (get_random_long); + +/* * randomize_range() returns a start address such that * * [...... <range> .....]
include/linux/random.h +1 -0
@@ -34,6 +34,7 @@ extern const struct file_operations rand#endif unsigned int get_random_int (void ); +unsigned long get_random_long (void );unsigned long randomize_range (unsigned long start,unsigned long end,unsigned long len);u32 prandom_u32 (void );
Greg Kroah-Hartman
maintainerPATCH 46/90 random: properly align get_random_int_hash
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit b1132deac01c2332d234fa821a70022796b79182 upstream.
get_random_long() reads from the get_random_int_hash array using an unsigned long pointer. For this code to be guaranteed correct on all architectures, the array must be aligned to an unsigned long boundary.
--- drivers/char/random.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/char/random.c +3 -1
@@ -1798,13 +1798,15 @@ int random_int_secret_init(void)return 0 ; } +static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash) +__aligned(sizeof(unsigned long)) ; +/* * Get a random word for internal kernel use only. Similar to urandom but * with the goal of minimal entropy pool depletion. As a result, the random * value is not cryptographically secure but for several uses the cost of * depleting entropy is too high */ -static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash);unsigned int get_random_int (void ) {__u32 *hash;
Greg Kroah-Hartman
maintainerPATCH 47/90 stackprotector: Increase the per-task stack canarys random range from 32 bits to 64 bits on 64-bit platforms
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Micay <[email protected]>
commit 5ea30e4e58040cfd6434c2f33dc3ea76e2c15b05 upstream.
The stack canary is an 'unsigned long' and should be fully initialized to random data rather than only 32 bits of random data.
--- kernel/fork.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/fork.c +1 -1
@@ -368,7 +368,7 @@ static struct task_struct *dup_task_struset_task_stack_end_magic (tsk);#ifdef CONFIG_CC_STACKPROTECTOR - tsk->stack_canary =get_random_int (); + tsk->stack_canary =get_random_long ();#endif /*
Re: [kernel-hardening] [PATCH 4.4 47/90] stackprotector: Increase the per-task stack canarys random range from 32 bits to 64 bits on 64-bit platforms
AFAICS get_random_long() doesn't exist in 4.4 (except in arch/x86/boot/compressed/aslr.c)? IIRC the same problem already occured with another kernel version?
Quoted 42 lines · Greg Kroah-Hartman
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Micay <[email protected]>
commit
5ea30e4e58040cfd6434c2f33dc3ea76e2c15b05upstream.The stack canary is an 'unsigned long' and should be fully initialized to random data rather than only 32 bits of random data.
Signed-off-by Daniel Micay <[email protected]>Acked-by Arjan van de Ven <[email protected]>Acked-by Rik van Riel <[email protected]>Acked-by Kees Cook <[email protected]>Cc Arjan van Ven <[email protected]>Cc Linus Torvalds <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Thomas Gleixner <[email protected]>Signed-off-by Ingo Molnar <[email protected]>Signed-off-by Greg Kroah-Hartman <[email protected]>--- kernel/fork.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)kernel/fork.c +1
-1@@ -368,7 +368,7 @@ static struct task_struct *dup_task_struset_task_stack_end_magic (tsk);#ifdef CONFIG_CC_STACKPROTECTOR - tsk->stack_canary =get_random_int (); + tsk->stack_canary =get_random_long ();#endif /*
Re: [kernel-hardening] [PATCH 4.4 47/90] stackprotector: Increase the per-task stack canarys random range from 32 bits to 64 bits on 64-bit platforms
Ah, nevermind, I just saw that this was changed in
https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git/tree/queue-4.4/drivers-char-random-add-get_random_long.patch
.
Quoted 48 lines · Jann Horn
AFAICS
get_random_long()doesn't exist in 4.4 (except inarch/x86/boot/compressed/aslr.c)? IIRC the same problem already occured with another kernel version?Quoted 42 lines · Greg Kroah-Hartman
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Micay <[email protected]>
commit
5ea30e4e58040cfd6434c2f33dc3ea76e2c15b05upstream.The stack canary is an 'unsigned long' and should be fully initialized to random data rather than only 32 bits of random data.
Signed-off-by Daniel Micay <[email protected]>Acked-by Arjan van de Ven <[email protected]>Acked-by Rik van Riel <[email protected]>Acked-by Kees Cook <[email protected]>Cc Arjan van Ven <[email protected]>Cc Linus Torvalds <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Thomas Gleixner <[email protected]>Signed-off-by Ingo Molnar <[email protected]>Signed-off-by Greg Kroah-Hartman <[email protected]>--- kernel/fork.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)kernel/fork.c +1
-1@@ -368,7 +368,7 @@ static struct task_struct *dup_task_struset_task_stack_end_magic (tsk);#ifdef CONFIG_CC_STACKPROTECTOR - tsk->stack_canary =get_random_int (); + tsk->stack_canary =get_random_long ();#endif /*
Greg Kroah-Hartman
maintainerPATCH 48/90 cpufreq: cpufreq_register_driver() should return -ENODEV if init fails
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Arcari <[email protected]>
commit 6c77003677d5f1ce15f26d24360cb66c0bc07bb3 upstream.
For a driver that does not set the CPUFREQ_STICKY flag, if all of the ->init() calls fail, cpufreq_register_driver() should return an error. This will prevent the driver from loading.
--- drivers/cpufreq/cpufreq.c | 1 + 1 file changed, 1 insertion(+)
drivers/cpufreq/cpufreq.c +1 -0
@@ -2451,6 +2451,7 @@ int cpufreq_register_driver(struct cpufrif (!(cpufreq_driver->flags &CPUFREQ_STICKY ) &&list_empty (&cpufreq_policy_list)) {/* if all ->init() calls failed, unregister */ + ret = -ENODEV ;pr_debug ("%s: No CPU initialized for driver %s\n" , __func__, driver_data->name); goto err_if_unreg;
Greg Kroah-Hartman
maintainerPATCH 49/90 target: Re-add check to reject control WRITEs with overflow data
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit 4ff83daa0200affe1894bd33d17bac404e3d78d4 upstream.
During v4.3 when the overflow/underflow check was relaxed by commit c72c525022:
commit c72c5250224d475614a00c1d7e54a67f77cd3410
Author: Roland Dreier <[email protected]>
Date: Wed Jul 22 15:08:18 2015 -0700
target: allow underflow/overflow for PR OUT etc. commands
to allow underflow/overflow for Windows compliance + FCP, a consequence was to allow control CDBs to process overflow data for iscsi-target with immediate data as well.
As per Roland's original change, continue to allow underflow cases for control CDBs to make Windows compliance + FCP happy, but until overflow for control CDBs is supported tree-wide, explicitly reject all control WRITEs with overflow following pre v4.3.y logic.
--- drivers/target/target_core_transport.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-)
drivers/target/target_core_transport.c +18 -5
@@ -1154,15 +1154,28 @@ target_cmd_size_check(struct se_cmd *cmdif (cmd->unknown_data_length) { cmd->data_length = size; }else if (size != cmd->data_length) { -pr_warn ("TARGET_CORE[%s]: Expected Transfer Length:" +pr_warn_ratelimited ("TARGET_CORE[%s]: Expected Transfer Length:" " %u does not match SCSI CDB Length: %u for SAM Opcode:" " 0x%02x\n" , cmd->se_tfo->get_fabric_name (), cmd->data_length, size, cmd->t_task_cdb[0 ]); -if (cmd->data_direction ==DMA_TO_DEVICE && - cmd->se_cmd_flags &SCF_SCSI_DATA_CDB ) { -pr_err ("Rejecting underflow/overflow WRITE data\n" ); -return TCM_INVALID_CDB_FIELD ; +if (cmd->data_direction ==DMA_TO_DEVICE ) { +if (cmd->se_cmd_flags &SCF_SCSI_DATA_CDB ) { +pr_err_ratelimited ("Rejecting underflow/overflow" +" for WRITE data CDB\n" ); +return TCM_INVALID_CDB_FIELD ; + } +/* +* Some fabric drivers like iscsi-target still expect to +* always reject overflow writes. Reject this case until +* full fabric driver level support for overflow writes +* is introduced tree-wide. +*/ +if (size > cmd->data_length) { +pr_err_ratelimited ("Rejecting overflow for" +" WRITE control CDB\n" ); +return TCM_INVALID_CDB_FIELD ; + } }/* * Reject READ_* or WRITE_* with overflow/underflow for
Greg Kroah-Hartman
maintainerPATCH 50/90 drm/msm: Expose our reservation object when exporting a dmabuf.
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Anholt <[email protected]>
commit 43523eba79bda8f5b4c27f8ffe20ea078d20113a upstream.
Without this, polling on the dma-buf (and presumably other devices synchronizing against our rendering) would return immediately, even while the BO was busy.
--- drivers/gpu/drm/msm/msm_drv.c | 1 + drivers/gpu/drm/msm/msm_drv.h | 1 + drivers/gpu/drm/msm/msm_gem_prime.c | 7 +++++++ 3 files changed, 9 insertions(+)
drivers/gpu/drm/msm/msm_drv.c +1 -0
@@ -986,6 +986,7 @@ static struct drm_driver msm_driver = { .prime_fd_to_handle = drm_gem_prime_fd_to_handle, .gem_prime_export = drm_gem_prime_export, .gem_prime_import = drm_gem_prime_import, + .gem_prime_res_obj = msm_gem_prime_res_obj, .gem_prime_pin = msm_gem_prime_pin, .gem_prime_unpin = msm_gem_prime_unpin, .gem_prime_get_sg_table = msm_gem_prime_get_sg_table,
drivers/gpu/drm/msm/msm_drv.h +1 -0
@@ -212,6 +212,7 @@ struct sg_table *msm_gem_prime_get_sg_tavoid *msm_gem_prime_vmap (struct drm_gem_object *obj);void msm_gem_prime_vunmap (struct drm_gem_object *obj,void *vaddr);int msm_gem_prime_mmap (struct drm_gem_object *obj,struct vm_area_struct *vma); +struct reservation_object *msm_gem_prime_res_obj (struct drm_gem_object *obj);struct drm_gem_object *msm_gem_prime_import_sg_table (struct drm_device *dev,struct dma_buf_attachment *attach,struct sg_table *sg);int msm_gem_prime_pin (struct drm_gem_object *obj);
drivers/gpu/drm/msm/msm_gem_prime.c +7 -0
@@ -70,3 +70,10 @@ void msm_gem_prime_unpin(struct drm_gem_if (!obj->import_attach)msm_gem_put_pages (obj); } + +struct reservation_object *msm_gem_prime_res_obj (struct drm_gem_object *obj) +{ +struct msm_gem_object *msm_obj =to_msm_bo (obj); + +return msm_obj->resv; +}
Greg Kroah-Hartman
maintainerPATCH 51/90 Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ulrik De Bie <[email protected]>
commit 47eb0c8b4d9eb6368941c6a9bb443f00847a46d7 upstream.
The Lifebook E546 and E557 touchpad were also not functioning and worked after running:
echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled
Add them to the list of machines that need this workaround.
--- drivers/input/mouse/elantech.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
drivers/input/mouse/elantech.c +16 -0
@@ -1122,8 +1122,10 @@ static int elantech_get_resolution_v4(st* Asus UX32VD 0x361f02 00, 15, 0e clickpad * Avatar AVIU-145A2 0x361f00 ? clickpad * Fujitsu LIFEBOOK E544 0x470f00 d0, 12, 09 2 hw buttons +* Fujitsu LIFEBOOK E546 0x470f00 50, 12, 09 2 hw buttons * Fujitsu LIFEBOOK E547 0x470f00 50, 12, 09 2 hw buttons * Fujitsu LIFEBOOK E554 0x570f01 40, 14, 0c 2 hw buttons +* Fujitsu LIFEBOOK E557 0x570f01 40, 14, 0c 2 hw buttons * Fujitsu T725 0x470f01 05, 12, 09 2 hw buttons * Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**) * Gigabyte U2442 0x450f01 58, 17, 0c 2 hw buttons
@@ -1529,6 +1531,13 @@ static const struct dmi_system_id elante }, }, { +/* Fujitsu LIFEBOOK E546 does not work with crc_enabled == 0 */ + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"FUJITSU" ), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E546"), + }, + }, + {/* Fujitsu LIFEBOOK E547 does not work with crc_enabled == 0 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
@@ -1550,6 +1559,13 @@ static const struct dmi_system_id elante }, }, { +/* Fujitsu LIFEBOOK E557 does not work with crc_enabled == 0 */ + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"FUJITSU" ), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E557"), + }, + }, + {/* Fujitsu LIFEBOOK U745 does not work with crc_enabled == 0 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
Greg Kroah-Hartman
maintainerPATCH 52/90 cpuset: consider dying css as offline
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tejun Heo <[email protected]>
commit 41c25707d21716826e3c1f60967f5550610ec1c9 upstream.
In most cases, a cgroup controller don't care about the liftimes of cgroups. For the controller, a css becomes online when ->css_online() is called on it and offline when ->css_offline() is called.
However, cpuset is special in that the user interface it exposes cares whether certain cgroups exist or not. Combined with the RCU delay between cgroup removal and css offlining, this can lead to user visible behavior oddities where operations which should succeed after cgroup removals fail for some time period. The effects of cgroup removals are delayed when seen from userland.
This patch adds css_is_dying() which tests whether offline is pending and updates is_cpuset_online() so that the function returns false also while offline is pending. This gets rid of the userland visible delays.
--- include/linux/cgroup.h | 20 ++++++++++++++++++++ kernel/cpuset.c | 4 ++-- 2 files changed, 22 insertions(+), 2 deletions(-)
include/linux/cgroup.h +20 -0
@@ -340,6 +340,26 @@ static inline bool css_tryget_online(str }/** +* css_is_dying - test whether the specified css is dying +* @css: target css +* +* Test whether @css is in the process of offlining or already offline. In +* most cases, ->css_online() and ->css_offline() callbacks should be +* enough; however, the actual offline operations are RCU delayed and this +* test returns %true also when @css is scheduled to be offlined. +* +* This is useful, for example, when the use case requires synchronous +* behavior with respect to cgroup removal. cgroup removal schedules css +* offlining but the css can seem alive while the operation is being +* delayed. If the delay affects user visible semantics, this test can be +* used to resolve the situation. +*/ +static inline bool css_is_dying (struct cgroup_subsys_state *css) +{ +return !(css->flags &CSS_NO_REF ) &&percpu_ref_is_dying (&css->refcnt); +} + +/** * css_put - put a css reference * @css: target css *
kernel/cpuset.c +2 -2
@@ -173,9 +173,9 @@ typedef enum { } cpuset_flagbits_t;/* convenient tests for these bits */ -static inline bool is_cpuset_online (const struct cpuset *cs) +static inline bool is_cpuset_online (struct cpuset *cs) { -return test_bit (CS_ONLINE , &cs->flags); +return test_bit (CS_ONLINE , &cs->flags) && !css_is_dying (&cs->css); }static inline int is_cpu_exclusive (const struct cpuset *cs)
Greg Kroah-Hartman
maintainerPATCH 53/90 fs: add i_blocksize()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fabian Frederick <[email protected]>
commit 93407472a21b82f39c955ea7787e5bc7da100642 upstream.
Replace all 1 << inode->i_blkbits and (1 << inode->i_blkbits) in fs branch.
This patch also fixes multiple checkpatch warnings: WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Thanks to Andrew Morton for suggesting more appropriate function instead of macro.
--- fs/btrfs/file.c | 2 +- fs/buffer.c | 12 ++++++------ fs/ceph/addr.c | 2 +- fs/direct-io.c | 2 +- fs/ext4/inode.c | 2 +- fs/ext4/move_extent.c | 2 +- fs/jfs/super.c | 4 ++-- fs/mpage.c | 2 +- fs/nfsd/blocklayout.c | 4 ++-- fs/nilfs2/btnode.c | 2 +- fs/nilfs2/inode.c | 4 ++-- fs/nilfs2/mdt.c | 4 ++-- fs/nilfs2/segment.c | 2 +- fs/ocfs2/aops.c | 2 +- fs/ocfs2/file.c | 2 +- fs/reiserfs/file.c | 2 +- fs/reiserfs/inode.c | 2 +- fs/stat.c | 2 +- fs/udf/inode.c | 2 +- fs/xfs/xfs_aops.c | 10 +++++----- fs/xfs/xfs_file.c | 4 ++-- include/linux/fs.h | 5 +++++ mm/truncate.c | 2 +- 23 files changed, 41 insertions(+), 36 deletions(-)
fs/btrfs/file.c +1 -1
@@ -2771,7 +2771,7 @@ static long btrfs_fallocate(struct fileif (!ret) ret =btrfs_prealloc_file_range (inode, mode, range->start, - range->len,1 << inode->i_blkbits, + range->len,i_blocksize (inode), offset + len, &alloc_hint);list_del (&range->list);kfree (range);
fs/buffer.c +6 -6
@@ -2298,7 +2298,7 @@ static int cont_expand_zero(struct file loff_t pos, loff_t *bytes) { struct inode *inode = mapping->host; -unsigned blocksize =1 << inode->i_blkbits; +unsigned int blocksize =i_blocksize (inode);struct page *page;void *fsdata;pgoff_t index, curidx;
@@ -2378,8 +2378,8 @@ int cont_write_begin(struct file *file, get_block_t *get_block, loff_t *bytes) {struct inode *inode = mapping->host; -unsigned blocksize =1 << inode->i_blkbits; -unsigned zerofrom; +unsigned int blocksize =i_blocksize (inode); +unsigned int zerofrom;int err; err =cont_expand_zero (file, mapping, pos, bytes);
@@ -2741,7 +2741,7 @@ int nobh_truncate_page(struct address_spstruct buffer_head map_bh;int err; - blocksize =1 << inode->i_blkbits; + blocksize =i_blocksize (inode); length = offset & (blocksize -1 );/* Block boundary? Nothing to do */
@@ -2819,7 +2819,7 @@ int block_truncate_page(struct address_sstruct buffer_head *bh;int err; - blocksize =1 << inode->i_blkbits; + blocksize =i_blocksize (inode); length = offset & (blocksize -1 );/* Block boundary? Nothing to do */
@@ -2931,7 +2931,7 @@ sector_t generic_block_bmap(struct addrestruct inode *inode = mapping->host; tmp.b_state =0 ; tmp.b_blocknr =0 ; - tmp.b_size =1 << inode->i_blkbits; + tmp.b_size =i_blocksize (inode);get_block (inode, block, &tmp,0 );return tmp.b_blocknr; }
fs/ceph/addr.c +1 -1
@@ -697,7 +697,7 @@ static int ceph_writepages_start(structstruct pagevec pvec;int done =0 ;int rc =0 ; -unsigned wsize =1 << inode->i_blkbits; +unsigned int wsize =i_blocksize (inode);struct ceph_osd_request *req =NULL ;int do_sync =0 ;loff_t snap_size, i_size;
fs/direct-io.c +1 -1
@@ -575,7 +575,7 @@ static int dio_set_defer_completion(stru/* * Call into the fs to map some more disk blocks. We record the current number * of available blocks at sdio->blocks_available. These are in units of the -* fs blocksize, (1 << inode->i_blkbits). +* fs blocksize, i_blocksize(inode). * * The fs is allowed to map lots of blocks at once. If it wants to do that, * it uses the passed inode-relative block number as the file offset, as usual.
fs/ext4/inode.c +1 -1
@@ -2044,7 +2044,7 @@ static int mpage_process_page_bufs(struc {struct inode *inode = mpd->inode;int err; -ext4_lblk_t blocks = (i_size_read (inode) + (1 << inode->i_blkbits) -1 ) +ext4_lblk_t blocks = (i_size_read (inode) +i_blocksize (inode) -1 ) >> inode->i_blkbits; do {
fs/ext4/move_extent.c +1 -1
@@ -187,7 +187,7 @@ mext_page_mkuptodate(struct page *page,if (PageUptodate (page))return 0 ; - blocksize =1 << inode->i_blkbits; + blocksize =i_blocksize (inode);if (!page_has_buffers (page))create_empty_buffers (page, blocksize,0 );
fs/jfs/super.c +2 -2
@@ -758,7 +758,7 @@ static ssize_t jfs_quota_read(struct sup sb->s_blocksize - offset : toread; tmp_bh.b_state =0 ; - tmp_bh.b_size =1 << inode->i_blkbits; + tmp_bh.b_size =i_blocksize (inode); err =jfs_get_block (inode, blk, &tmp_bh,0 );if (err)return err;
@@ -798,7 +798,7 @@ static ssize_t jfs_quota_write(struct su sb->s_blocksize - offset : towrite; tmp_bh.b_state =0 ; - tmp_bh.b_size =1 << inode->i_blkbits; + tmp_bh.b_size =i_blocksize (inode); err =jfs_get_block (inode, blk, &tmp_bh,1 );if (err) goto out;
fs/mpage.c +1 -1
@@ -111,7 +111,7 @@ map_buffer_to_page(struct page *page, stSetPageUptodate (page);return ; } -create_empty_buffers (page,1 << inode->i_blkbits,0 ); +create_empty_buffers (page,i_blocksize (inode),0 ); } head =page_buffers (page); page_bh = head;
fs/nfsd/blocklayout.c +2 -2
@@ -50,7 +50,7 @@ nfsd4_block_proc_layoutget(struct inode {struct nfsd4_layout_seg *seg = &args->lg_seg;struct super_block *sb = inode->i_sb; -u32 block_size = (1 << inode->i_blkbits); +u32 block_size =i_blocksize (inode);struct pnfs_block_extent *bex;struct iomap iomap;u32 device_generation =0 ;
@@ -151,7 +151,7 @@ nfsd4_block_proc_layoutcommit(struct inoint error; nr_iomaps =nfsd4_block_decode_layoutupdate (lcp->lc_up_layout, - lcp->lc_up_len, &iomaps,1 << inode->i_blkbits); + lcp->lc_up_len, &iomaps,i_blocksize (inode));if (nr_iomaps <0 )return nfserrno (nr_iomaps);
fs/nilfs2/btnode.c +1 -1
@@ -55,7 +55,7 @@ nilfs_btnode_create_block(struct addressbrelse (bh);BUG (); } -memset (bh->b_data,0 ,1 << inode->i_blkbits); +memset (bh->b_data,0 ,i_blocksize (inode)); bh->b_bdev = inode->i_sb->s_bdev; bh->b_blocknr = blocknr;set_buffer_mapped (bh);
fs/nilfs2/inode.c +2 -2
@@ -55,7 +55,7 @@ void nilfs_inode_add_blocks(struct inode {struct nilfs_root *root =NILFS_I (inode)->i_root; -inode_add_bytes (inode, (1 << inode->i_blkbits) * n); +inode_add_bytes (inode,i_blocksize (inode) * n);if (root)atomic64_add (n, &root->blocks_count); }
@@ -64,7 +64,7 @@ void nilfs_inode_sub_blocks(struct inode {struct nilfs_root *root =NILFS_I (inode)->i_root; -inode_sub_bytes (inode, (1 << inode->i_blkbits) * n); +inode_sub_bytes (inode,i_blocksize (inode) * n);if (root)atomic64_sub (n, &root->blocks_count); }
fs/nilfs2/mdt.c +2 -2
@@ -60,7 +60,7 @@ nilfs_mdt_insert_new_block(struct inodeset_buffer_mapped (bh); kaddr =kmap_atomic (bh->b_page); -memset (kaddr +bh_offset (bh),0 ,1 << inode->i_blkbits); +memset (kaddr +bh_offset (bh),0 ,i_blocksize (inode));if (init_block)init_block (inode, bh, kaddr);flush_dcache_page (bh->b_page);
@@ -503,7 +503,7 @@ void nilfs_mdt_set_entry_size(struct inostruct nilfs_mdt_info *mi =NILFS_MDT (inode); mi->mi_entry_size = entry_size; - mi->mi_entries_per_block = (1 << inode->i_blkbits) / entry_size; + mi->mi_entries_per_block =i_blocksize (inode) / entry_size; mi->mi_first_entry_offset =DIV_ROUND_UP (header_size, entry_size); }
fs/nilfs2/segment.c +1 -1
@@ -719,7 +719,7 @@ static size_t nilfs_lookup_dirty_data_bulock_page (page);if (!page_has_buffers (page)) -create_empty_buffers (page,1 << inode->i_blkbits,0 ); +create_empty_buffers (page,i_blocksize (inode),0 );unlock_page (page); bh = head =page_buffers (page);
fs/ocfs2/aops.c +1 -1
@@ -1103,7 +1103,7 @@ int ocfs2_map_page_blocks(struct page *pint ret =0 ;struct buffer_head *head, *bh, *wait[2 ], **wait_bh = wait;unsigned int block_end, block_start; -unsigned int bsize =1 << inode->i_blkbits; +unsigned int bsize =i_blocksize (inode);if (!page_has_buffers (page))create_empty_buffers (page, bsize,0 );
fs/ocfs2/file.c +1 -1
@@ -808,7 +808,7 @@ static int ocfs2_write_zero_page(struct/* We know that zero_from is block aligned */ for (block_start = zero_from; block_start < zero_to; block_start = block_end) { - block_end = block_start + (1 << inode->i_blkbits); + block_end = block_start +i_blocksize (inode);/* * block_start is block-aligned. Bump it by one to force
fs/reiserfs/file.c +1 -1
@@ -189,7 +189,7 @@ int reiserfs_commit_page(struct inode *iint ret =0 ; th.t_trans_id =0 ; - blocksize =1 << inode->i_blkbits; + blocksize =i_blocksize (inode);if (logit) {reiserfs_write_lock (s);
fs/reiserfs/inode.c +1 -1
@@ -524,7 +524,7 @@ static int reiserfs_get_blocks_direct_io* referenced in convert_tail_for_hole() that may be called from * reiserfs_get_block() */ - bh_result->b_size = (1 << inode->i_blkbits); + bh_result->b_size =i_blocksize (inode); ret =reiserfs_get_block (inode, iblock, bh_result, create |GET_BLOCK_NO_DANGLE );
fs/stat.c +1 -1
@@ -31,7 +31,7 @@ void generic_fillattr(struct inode *inod stat->atime = inode->i_atime; stat->mtime = inode->i_mtime; stat->ctime = inode->i_ctime; - stat->blksize = (1 << inode->i_blkbits); + stat->blksize =i_blocksize (inode); stat->blocks = inode->i_blocks; }
fs/udf/inode.c +1 -1
@@ -1206,7 +1206,7 @@ int udf_setsize(struct inode *inode, lof {int err;struct udf_inode_info *iinfo; -int bsize =1 << inode->i_blkbits; +int bsize =i_blocksize (inode);if (!(S_ISREG (inode->i_mode) ||S_ISDIR (inode->i_mode) ||S_ISLNK (inode->i_mode)))
fs/xfs/xfs_aops.c +5 -5
@@ -288,7 +288,7 @@ xfs_map_blocks( {struct xfs_inode *ip =XFS_I (inode);struct xfs_mount *mp = ip->i_mount; -ssize_t count =1 << inode->i_blkbits; +ssize_t count =i_blocksize (inode);xfs_fileoff_t offset_fsb, end_fsb;int error =0 ;int bmapi_flags =XFS_BMAPI_ENTIRE ;
@@ -921,7 +921,7 @@ xfs_aops_discard_page(break ; } next_buffer: - offset +=1 << inode->i_blkbits; + offset +=i_blocksize (inode); }while ((bh = bh->b_this_page) != head);
@@ -1363,7 +1363,7 @@ xfs_map_trim_size( offset + mapping_size >= i_size_read(inode)) {/* limit mapping to block that spans EOF */ mapping_size =roundup_64 (i_size_read (inode) - offset, -1 << inode->i_blkbits); +i_blocksize (inode)); }if (mapping_size >LONG_MAX ) mapping_size =LONG_MAX ;
@@ -1395,7 +1395,7 @@ __xfs_get_blocks(return -EIO ; offset = (xfs_off_t )iblock << inode->i_blkbits; -ASSERT (bh_result->b_size >= (1 << inode->i_blkbits)); +ASSERT (bh_result->b_size >=i_blocksize (inode)); size = bh_result->b_size;if (!create && direct && offset >=i_size_read (inode))
@@ -1968,7 +1968,7 @@ xfs_vm_set_page_dirty(if (offset < end_offset)set_buffer_dirty (bh); bh = bh->b_this_page; - offset +=1 << inode->i_blkbits; + offset +=i_blocksize (inode); }while (bh != head); }/*
fs/xfs/xfs_file.c +2 -2
@@ -947,7 +947,7 @@ xfs_file_fallocate(if (error) goto out_unlock; }else if (mode &FALLOC_FL_COLLAPSE_RANGE ) { -unsigned blksize_mask = (1 << inode->i_blkbits) -1 ; +unsigned int blksize_mask =i_blocksize (inode) -1 ;if (offset & blksize_mask || len & blksize_mask) { error = -EINVAL ;
@@ -969,7 +969,7 @@ xfs_file_fallocate(if (error) goto out_unlock; }else if (mode &FALLOC_FL_INSERT_RANGE ) { -unsigned blksize_mask = (1 << inode->i_blkbits) -1 ; +unsigned int blksize_mask =i_blocksize (inode) -1 ; new_size =i_size_read (inode) + len;if (offset & blksize_mask || len & blksize_mask) {
include/linux/fs.h +5 -0
@@ -680,6 +680,11 @@ struct inode {void *i_private;/* fs or device private pointer */ }; +static inline unsigned int i_blocksize (const struct inode *node) +{ +return (1 << node->i_blkbits); +} +static inline int inode_unhashed (struct inode *inode) {return hlist_unhashed (&inode->i_hash);
mm/truncate.c +1 -1
@@ -732,7 +732,7 @@ EXPORT_SYMBOL(truncate_setsize);*/ void pagecache_isize_extended (struct inode *inode,loff_t from,loff_t to) { -int bsize =1 << inode->i_blkbits; +int bsize =i_blocksize (inode);loff_t rounded_from;struct page *page;pgoff_t index;
Greg Kroah-Hartman
maintainerPATCH 54/90 ufs: restore proper tail allocation
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit 8785d84d002c2ce0f68fbcd6c2c86be859802c7e upstream.
--- fs/ufs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/ufs/inode.c +1 -1
@@ -284,7 +284,7 @@ ufs_inode_getfrag(struct inode *inode, u goal += uspi->s_fpb; } tmp =ufs_new_fragments (inode, p,ufs_blknum (new_fragment), - goal, uspi->s_fpb, err, locked_page); + goal, nfrags, err, locked_page);if (!tmp) { *err = -ENOSPC ;
Greg Kroah-Hartman
maintainerPATCH 55/90 fix ufs_isblockset()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit 414cf7186dbec29bd946c138d6b5c09da5955a08 upstream.
--- fs/ufs/util.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
fs/ufs/util.h +7 -3
@@ -473,15 +473,19 @@ static inline unsigned _ubh_find_last_zestatic inline int _ubh_isblockset_ (struct ufs_sb_private_info * uspi,struct ufs_buffer_head * ubh,unsigned begin,unsigned block) { +u8 mask;switch (uspi->s_fpb) {case 8 :return (*ubh_get_addr (ubh, begin + block) ==0xff );case 4 : -return (*ubh_get_addr (ubh, begin + (block >>1 )) == (0x0f << ((block &0x01 ) <<2 ))); + mask =0x0f << ((block &0x01 ) <<2 ); +return (*ubh_get_addr (ubh, begin + (block >>1 )) & mask) == mask;case 2 : -return (*ubh_get_addr (ubh, begin + (block >>2 )) == (0x03 << ((block &0x03 ) <<1 ))); + mask =0x03 << ((block &0x03 ) <<1 ); +return (*ubh_get_addr (ubh, begin + (block >>2 )) & mask) == mask;case 1 : -return (*ubh_get_addr (ubh, begin + (block >>3 )) == (0x01 << (block &0x07 ))); + mask =0x01 << (block &0x07 ); +return (*ubh_get_addr (ubh, begin + (block >>3 )) & mask) == mask; }return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 56/90 ufs: restore maintaining ->i_blocks
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit eb315d2ae614493fd1ebb026c75a80573d84f7ad upstream.
--- fs/stat.c | 1 + fs/ufs/balloc.c | 26 +++++++++++++++++++++++++- 2 files changed, 26 insertions(+), 1 deletion(-)
fs/stat.c +1 -0
@@ -454,6 +454,7 @@ void __inode_add_bytes(struct inode *ino inode->i_bytes -=512 ; } } +EXPORT_SYMBOL (__inode_add_bytes);void inode_add_bytes (struct inode *inode,loff_t bytes) {
fs/ufs/balloc.c +25 -1
@@ -81,7 +81,8 @@ void ufs_free_fragments(struct inode *inufs_error (sb,"ufs_free_fragments" ,"bit already cleared for fragment %u" , i); } - + +inode_sub_bytes (inode, count << uspi->s_fshift);fs32_add (sb, &ucg->cg_cs.cs_nffree, count); uspi->cs_total.cs_nffree += count;fs32_add (sb, &UFS_SB (sb)->fs_cs (cgno).cs_nffree, count);
@@ -183,6 +184,7 @@ do_more:ufs_error (sb,"ufs_free_blocks" ,"freeing free fragment" ); }ubh_setblock (UCPI_UBH (ucpi), ucpi->c_freeoff, blkno); +inode_sub_bytes (inode, uspi->s_fpb << uspi->s_fshift);if ((UFS_SB (sb)->s_flags &UFS_CG_MASK ) ==UFS_CG_44BSD )ufs_clusteracct (sb, ucpi, blkno,1 );
@@ -494,6 +496,20 @@ u64 ufs_new_fragments(struct inode *inodreturn 0 ; } +static bool try_add_frags (struct inode *inode,unsigned frags) +{ +unsigned size = frags *i_blocksize (inode); +spin_lock (&inode->i_lock); +__inode_add_bytes (inode, size); +if (unlikely ((u32 )inode->i_blocks != inode->i_blocks)) { +__inode_sub_bytes (inode, size); +spin_unlock (&inode->i_lock); +return false; + } +spin_unlock (&inode->i_lock); +return true; +} +static u64 ufs_add_fragments (struct inode *inode,u64 fragment,unsigned oldcount,unsigned newcount) {
@@ -530,6 +546,9 @@ static u64 ufs_add_fragments(struct inodfor (i = oldcount; i < newcount; i++)if (ubh_isclr (UCPI_UBH (ucpi), ucpi->c_freeoff, fragno + i))return 0 ; + +if (!try_add_frags (inode, count)) +return 0 ;/* * Block can be extended */
@@ -647,6 +666,7 @@ cg_found:ubh_setbit (UCPI_UBH (ucpi), ucpi->c_freeoff, goal + i); i = uspi->s_fpb - count; +inode_sub_bytes (inode, i << uspi->s_fshift);fs32_add (sb, &ucg->cg_cs.cs_nffree, i); uspi->cs_total.cs_nffree += i;fs32_add (sb, &UFS_SB (sb)->fs_cs (cgno).cs_nffree, i);
@@ -657,6 +677,8 @@ cg_found: result =ufs_bitmap_search (sb, ucpi, goal, allocsize);if (result ==INVBLOCK )return 0 ; +if (!try_add_frags (inode, count)) +return 0 ;for (i =0 ; i < count; i++)ubh_clrbit (UCPI_UBH (ucpi), ucpi->c_freeoff, result + i);
@@ -716,6 +738,8 @@ norot:return INVBLOCK ; ucpi->c_rotor = result; gotit: +if (!try_add_frags (inode, uspi->s_fpb)) +return 0 ; blkno =ufs_fragstoblks (result);ubh_clrblock (UCPI_UBH (ucpi), ucpi->c_freeoff, blkno);if ((UFS_SB (sb)->s_flags &UFS_CG_MASK ) ==UFS_CG_44BSD )
Greg Kroah-Hartman
maintainerPATCH 57/90 ufs: set correct ->s_maxsize
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit 6b0d144fa758869bdd652c50aa41aaf601232550 upstream.
--- fs/ufs/super.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
fs/ufs/super.c +18 -0
@@ -746,6 +746,23 @@ static void ufs_put_super(struct super_breturn ; } +static u64 ufs_max_bytes (struct super_block *sb) +{ +struct ufs_sb_private_info *uspi =UFS_SB (sb)->s_uspi; +int bits = uspi->s_apbshift; +u64 res; + +if (bits >21 ) + res = ~0ULL ; +else + res =UFS_NDADDR + (1LL << bits) + (1LL << (2 *bits)) + + (1LL << (3 *bits)); + +if (res >= (MAX_LFS_FILESIZE >> uspi->s_bshift)) +return MAX_LFS_FILESIZE ; +return res << uspi->s_bshift; +} +static int ufs_fill_super (struct super_block *sb,void *data,int silent) {struct ufs_sb_info * sbi;
@@ -1212,6 +1229,7 @@ magic_found: "fast symlink size (%u)\n", uspi->s_maxsymlinklen); uspi->s_maxsymlinklen = maxsymlen; } + sb->s_maxbytes =ufs_max_bytes (sb); sb->s_max_links =UFS_LINK_MAX ; inode =ufs_iget (sb,UFS_ROOTINO );
Greg Kroah-Hartman
maintainerPATCH 58/90 ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit 940ef1a0ed939c2ca029fca715e25e7778ce1e34 upstream.
... and it really needs splitting into "new" and "extend" cases, but that's for later
--- fs/ufs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
fs/ufs/inode.c +2 -1
@@ -235,7 +235,8 @@ ufs_extend_tail(struct inode *inode, u64 p =ufs_get_direct_data_ptr (uspi, ufsi, block); tmp =ufs_new_fragments (inode, p, lastfrag,ufs_data_ptr_to_cpu (sb, p), - new_size, err, locked_page); + new_size - (lastfrag & uspi->s_fpbmask), err, + locked_page);return tmp !=0 ; }
Greg Kroah-Hartman
maintainerPATCH 59/90 ufs_getfrag_block(): we only grab ->truncate_mutex on block creation path
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit 006351ac8ead0d4a67dd3845e3ceffe650a23212 upstream.
--- fs/ufs/inode.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
fs/ufs/inode.c +3 -1
@@ -403,7 +403,9 @@ static int ufs_getfrag_block(struct inodif (!create) { phys64 =ufs_frag_map (inode, offsets, depth); - goto out; +if (phys64) +map_bh (bh_result, sb, phys64 + frag); +return 0 ; }/* This code entered only while writing ....? */
Greg Kroah-Hartman
maintainerPATCH 60/90 cxl: Fix error path on bad ioctl
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frederic Barrat <[email protected]>
commit cec422c11caeeccae709e9942058b6b644ce434c upstream.
Fix error path if we can't copy user structure on CXL_IOCTL_START_WORK ioctl. We shouldn't unlock the context status mutex as it was not locked (yet).
--- drivers/misc/cxl/file.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
drivers/misc/cxl/file.c +2 -5
@@ -158,11 +158,8 @@ static long afu_ioctl_start_work(struct/* Do this outside the status_mutex to avoid a circular dependency with * the locking in cxl_mmap_fault() */ -if (copy_from_user (&work, uwork, -sizeof (struct cxl_ioctl_start_work ))) { - rc = -EFAULT ; - goto out; - } +if (copy_from_user (&work, uwork,sizeof (work))) +return -EFAULT ;mutex_lock (&ctx->status_mutex);if (ctx->status !=OPENED ) {
Greg Kroah-Hartman
maintainerPATCH 61/90 btrfs: use correct types for page indices in btrfs_page_exists_in_range
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Sterba <[email protected]>
commit cc2b702c52094b637a351d7491ac5200331d0445 upstream.
Variables start_idx and end_idx are supposed to hold a page index derived from the file offsets. The int type is not the right one though, offsets larger than 1 << 44 will get silently trimmed off the high bits. (1 << 44 is 16TiB)
What can go wrong, if start is below the boundary and end gets trimmed:
- if there's a page after start, we'll find it (radix_tree_gang_lookup_slot)
- the final check "if (page->index <= end_idx)" will unexpectedly fail
The function will return false, ie. "there's no page in the range", although there is at least one.
btrfs_page_exists_in_range is used to prevent races in:
* in hole punching, where we make sure there are not pages in the truncated range, otherwise we'll wait for them to finish and redo truncation, but we're going to replace the pages with holes anyway so the only problem is the intermediate state
* lock_extent_direct: we want to make sure there are no pages before we lock and start DIO, to prevent stale data reads
For practical occurence of the bug, there are several constaints. The file must be quite large, the affected range must cross the 16TiB boundary and the internal state of the file pages and pending operations must match. Also, we must not have started any ordered data in the range, otherwise we don't even reach the buggy function check.
DIO locking tries hard in several places to avoid deadlocks with buffered IO and avoids waiting for ranges. The worst consequence seems to be stale data read.
--- fs/btrfs/inode.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
fs/btrfs/inode.c +2 -2
@@ -7318,8 +7318,8 @@ bool btrfs_page_exists_in_range(struct iint found = false;void **pagep =NULL ;struct page *page =NULL ; -int start_idx; -int end_idx; +unsigned long start_idx; +unsigned long end_idx; start_idx = start >>PAGE_CACHE_SHIFT ;
Greg Kroah-Hartman
maintainerPATCH 62/90 btrfs: fix memory leak in update_space_info failure path
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeff Mahoney <[email protected]>
commit 896533a7da929136d0432713f02a3edffece2826 upstream.
If we fail to add the space_info kobject, we'll leak the memory for the percpu counter.
--- fs/btrfs/extent-tree.c | 1 + 1 file changed, 1 insertion(+)
fs/btrfs/extent-tree.c +1 -0
@@ -3854,6 +3854,7 @@ static int update_space_info(struct btrf info->space_info_kobj,"%s" , alloc_name(found->flags));if (ret) { +percpu_counter_destroy (&found->total_bytes_pinned);kfree (found);return ret; }
Greg Kroah-Hartman
maintainerPATCH 63/90 KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pages
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Zyngier <[email protected]>
commit d6dbdd3c8558cad3b6d74cc357b408622d122331 upstream.
Under memory pressure, we start ageing pages, which amounts to parsing the page tables. Since we don't want to allocate any extra level, we pass NULL for our private allocation cache. Which means that stage2_get_pud() is allowed to fail. This results in the following splat:
[ 1520.409577] Unable to handle kernel NULL pointer dereference at virtual address 00000008 [ 1520.417741] pgd = ffff810f52fef000 [ 1520.421201] [00000008] *pgd=0000010f636c5003, *pud=0000010f56f48003, *pmd=0000000000000000 [ 1520.429546] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 1520.435156] Modules linked in: [ 1520.438246] CPU: 15 PID: 53550 Comm: qemu-system-aar Tainted: G W 4.12.0-rc4-00027-g1885c397eaec #7205 [ 1520.448705] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB12A 10/26/2016 [ 1520.463726] task: ffff800ac5fb4e00 task.stack: ffff800ce04e0000 [ 1520.469666] PC is at stage2_get_pmd+0x34/0x110 [ 1520.474119] LR is at kvm_age_hva_handler+0x44/0xf0 [ 1520.478917] pc : [<ffff0000080b137c>] lr : [<ffff0000080b149c>] pstate: 40000145 [ 1520.486325] sp : ffff800ce04e33d0 [ 1520.489644] x29: ffff800ce04e33d0 x28: 0000000ffff40064 [ 1520.494967] x27: 0000ffff27e00000 x26: 0000000000000000 [ 1520.500289] x25: ffff81051ba65008 x24: 0000ffff40065000 [ 1520.505618] x23: 0000ffff40064000 x22: 0000000000000000 [ 1520.510947] x21: ffff810f52b20000 x20: 0000000000000000 [ 1520.516274] x19: 0000000058264000 x18: 0000000000000000 [ 1520.521603] x17: 0000ffffa6fe7438 x16: ffff000008278b70 [ 1520.526940] x15: 000028ccd8000000 x14: 0000000000000008 [ 1520.532264] x13: ffff7e0018298000 x12: 0000000000000002 [ 1520.537582] x11: ffff000009241b93 x10: 0000000000000940 [ 1520.542908] x9 : ffff0000092ef800 x8 : 0000000000000200 [ 1520.548229] x7 : ffff800ce04e36a8 x6 : 0000000000000000 [ 1520.553552] x5 : 0000000000000001 x4 : 0000000000000000 [ 1520.558873] x3 : 0000000000000000 x2 : 0000000000000008 [ 1520.571696] x1 : ffff000008fd5000 x0 : ffff0000080b149c [ 1520.577039] Process qemu-system-aar (pid: 53550, stack limit = 0xffff800ce04e0000) [...] [ 1521.510735] [<ffff0000080b137c>] stage2_get_pmd+0x34/0x110 [ 1521.516221] [<ffff0000080b149c>] kvm_age_hva_handler+0x44/0xf0 [ 1521.522054] [<ffff0000080b0610>] handle_hva_to_gpa+0xb8/0xe8 [ 1521.527716] [<ffff0000080b3434>] kvm_age_hva+0x44/0xf0 [ 1521.532854] [<ffff0000080a58b0>] kvm_mmu_notifier_clear_flush_young+0x70/0xc0 [ 1521.539992] [<ffff000008238378>] __mmu_notifier_clear_flush_young+0x88/0xd0 [ 1521.546958] [<ffff00000821eca0>] page_referenced_one+0xf0/0x188 [ 1521.552881] [<ffff00000821f36c>] rmap_walk_anon+0xec/0x250 [ 1521.558370] [<ffff000008220f78>] rmap_walk+0x78/0xa0 [ 1521.563337] [<ffff000008221104>] page_referenced+0x164/0x180 [ 1521.569002] [<ffff0000081f1af0>] shrink_active_list+0x178/0x3b8 [ 1521.574922] [<ffff0000081f2058>] shrink_node_memcg+0x328/0x600 [ 1521.580758] [<ffff0000081f23f4>] shrink_node+0xc4/0x328 [ 1521.585986] [<ffff0000081f2718>] do_try_to_free_pages+0xc0/0x340 [ 1521.592000] [<ffff0000081f2a64>] try_to_free_pages+0xcc/0x240
[...]
The trivial fix is to handle this NULL pud value early, rather than dereferencing it blindly.
--- arch/arm/kvm/mmu.c | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/kvm/mmu.c +3 -0
@@ -869,6 +869,9 @@ static pmd_t *stage2_get_pmd(struct kvmpmd_t *pmd; pud =stage2_get_pud (kvm, cache, addr); +if (!pud) +return NULL ; +if (pud_none (*pud)) {if (!cache)return NULL ;
Greg Kroah-Hartman
maintainerPATCH 64/90 scsi: qla2xxx: dont disable a not previously enabled PCI device
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Thumshirn <[email protected]>
commit ddff7ed45edce4a4c92949d3c61cd25d229c4a14 upstream.
When pci_enable_device() or pci_enable_device_mem() fail in qla2x00_probe_one() we bail out but do a call to pci_disable_device(). This causes the dev_WARN_ON() in pci_disable_device() to trigger, as the device wasn't enabled previously.
So instead of taking the 'probe_out' error path we can directly return *iff* one of the pci_enable_device() calls fails.
Additionally rename the 'probe_out' goto label's name to the more descriptive 'disable_device'.
--- drivers/scsi/qla2xxx/qla_os.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/scsi/qla2xxx/qla_os.c +4 -4
@@ -2311,10 +2311,10 @@ qla2x00_probe_one(struct pci_dev *pdev,if (mem_only) {if (pci_enable_device_mem (pdev)) - goto probe_out; +return ret; }else {if (pci_enable_device (pdev)) - goto probe_out; +return ret; }/* This may fail but that's ok */
@@ -2324,7 +2324,7 @@ qla2x00_probe_one(struct pci_dev *pdev,if (!ha) {ql_log_pci (ql_log_fatal, pdev,0x0009 ,"Unable to allocate memory for ha.\n" ); - goto probe_out; + goto disable_device; }ql_dbg_pci (ql_dbg_init, pdev,0x000a ,"Memory allocated for ha=%p.\n" , ha);
@@ -2923,7 +2923,7 @@ iospace_config_failed:kfree (ha); ha =NULL ; -probe_out: +disable_device:pci_disable_device (pdev);return ret; }
Greg Kroah-Hartman
maintainerPATCH 65/90 powerpc/eeh: Avoid use after free in eeh_handle_special_event()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Russell Currey <[email protected]>
commit daeba2956f32f91f3493788ff6ee02fb1b2f02fa upstream.
eeh_handle_special_event() is called when an EEH event is detected but can't be narrowed down to a specific PE. This function looks through every PE to find one in an erroneous state, then calls the regular event handler eeh_handle_normal_event() once it knows which PE has an error.
However, if eeh_handle_normal_event() found that the PE cannot possibly be recovered, it will free it, rendering the passed PE stale.
This leads to a use after free in eeh_handle_special_event() as it attempts to clear the "recovering" state on the PE after eeh_handle_normal_event() returns.
Thus, make sure the PE is valid when attempting to clear state in eeh_handle_special_event().
--- arch/powerpc/kernel/eeh_driver.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-)
arch/powerpc/kernel/eeh_driver.c +15 -4
@@ -655,7 +655,7 @@ static int eeh_reset_device(struct eeh_p*/ #define MAX_WAIT_FOR_RECOVERY 300 -static void eeh_handle_normal_event (struct eeh_pe *pe) +static bool eeh_handle_normal_event (struct eeh_pe *pe) {struct pci_bus *frozen_bus;int rc =0 ;
@@ -665,7 +665,7 @@ static void eeh_handle_normal_event(struif (!frozen_bus) {pr_err ("%s: Cannot find PCI bus for PHB#%d-PE#%x\n" , __func__, pe->phb->global_number, pe->addr); -return ; +return false; }eeh_pe_update_time_stamp (pe);
@@ -790,7 +790,7 @@ static void eeh_handle_normal_event(strupr_info ("EEH: Notify device driver to resume\n" );eeh_pe_dev_traverse (pe, eeh_report_resume,NULL ); -return ; +return false; excess_failures:/*
@@ -831,7 +831,11 @@ perm_error:pci_lock_rescan_remove ();pcibios_remove_pci_devices (frozen_bus);pci_unlock_rescan_remove (); + +/* The passed PE should no longer be used */ +return true; } +return false; }static void eeh_handle_special_event (void )
@@ -897,7 +901,14 @@ static void eeh_handle_special_event(voi*/ if (rc ==EEH_NEXT_ERR_FROZEN_PE || rc ==EEH_NEXT_ERR_FENCED_PHB ) { -eeh_handle_normal_event (pe); +/* +* eeh_handle_normal_event() can make the PE stale if it +* determines that the PE cannot possibly be recovered. +* Don't modify the PE state if that's the case. +*/ +if (eeh_handle_normal_event (pe)) +continue ; +eeh_pe_state_clear (pe,EEH_PE_RECOVERING ); }else {pci_lock_rescan_remove ();
Greg Kroah-Hartman
maintainerPATCH 66/90 powerpc/numa: Fix percpu allocations to be NUMA aware
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman <[email protected]>
commit ba4a648f12f4cd0a8003dd229b6ca8a53348ee4b upstream.
In commit 8c272261194d ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID"), we switched to the generic implementation of cpu_to_node(), which uses a percpu variable to hold the NUMA node for each CPU.
Unfortunately we neglected to notice that we use cpu_to_node() in the allocation of our percpu areas, leading to a chicken and egg problem. In practice what happens is when we are setting up the percpu areas, cpu_to_node() reports that all CPUs are on node 0, so we allocate all percpu areas on node 0.
This is visible in the dmesg output, as all pcpu allocs being in group 0:
pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23
pcpu-alloc: [0] 24 25 26 27 [0] 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 [0] 36 37 38 39
pcpu-alloc: [0] 40 41 42 43 [0] 44 45 46 47
To fix it we need an early_cpu_to_node() which can run prior to percpu being setup. We already have the numa_cpu_lookup_table we can use, so just plumb it in. With the patch dmesg output shows two groups, 0 and 1:
pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23
pcpu-alloc: [1] 24 25 26 27 [1] 28 29 30 31
pcpu-alloc: [1] 32 33 34 35 [1] 36 37 38 39
pcpu-alloc: [1] 40 41 42 43 [1] 44 45 46 47
We can also check the data_offset in the paca of various CPUs, with the fix we see:
CPU 0: data_offset = 0x0ffe8b0000
CPU 24: data_offset = 0x1ffe5b0000
And we can see from dmesg that CPU 24 has an allocation on node 1:
node 0: [mem 0x0000000000000000-0x0000000fffffffff]
node 1: [mem 0x0000001000000000-0x0000001fffffffff]
--- arch/powerpc/include/asm/topology.h | 14 ++++++++++++++ arch/powerpc/kernel/setup_64.c | 4 ++-- 2 files changed, 16 insertions(+), 2 deletions(-)
arch/powerpc/include/asm/topology.h +14 -0
@@ -44,8 +44,22 @@ extern void __init dump_numa_cpu_topologextern int sysfs_add_device_to_node (struct device *dev,int nid);extern void sysfs_remove_device_from_node (struct device *dev,int nid); +static inline int early_cpu_to_node (int cpu) +{ +int nid; + + nid = numa_cpu_lookup_table[cpu]; + +/* +* Fall back to node 0 if nid is unset (it should be, except bugs). +* This allows callers to safely do NODE_DATA(early_cpu_to_node(cpu)). +*/ +return (nid <0 ) ?0 : nid; +}#else +static inline int early_cpu_to_node (int cpu) {return 0 ; } +static inline void dump_numa_cpu_topology (void ) {}static inline int sysfs_add_device_to_node (struct device *dev,int nid)
arch/powerpc/kernel/setup_64.c +2 -2
@@ -751,7 +751,7 @@ void __init setup_arch(char **cmdline_p)static void *__init pcpu_fc_alloc (unsigned int cpu,size_t size,size_t align) { -return __alloc_bootmem_node (NODE_DATA (cpu_to_node (cpu)), size, align, +return __alloc_bootmem_node (NODE_DATA (early_cpu_to_node (cpu)), size, align,__pa (MAX_DMA_ADDRESS )); }
@@ -762,7 +762,7 @@ static void __init pcpu_fc_free(void *ptstatic int pcpu_cpu_distance (unsigned int from,unsigned int to) { -if (cpu_to_node (from) ==cpu_to_node (to)) +if (early_cpu_to_node (from) ==early_cpu_to_node (to))return LOCAL_DISTANCE ;else return REMOTE_DISTANCE ;
Re: [PATCH 4.4 66/90] powerpc/numa: Fix percpu allocations to be NUMA aware
JFYI. We have encountered a regression after applying this patch on a large ppc machine. While the patch is the right thing to do it doesn't work well with the current vmalloc area size on ppc and large machines where NUMA nodes are very far from each other. Just for the reference the boot fails on such a machine with bunch of warning preceeding it. See http://lkml.kernel.org/r/[email protected]
It seems the right thing to do is to enlarge the vmalloc space on ppc but this is not the case in the upstream kernel yet AFAIK. It is also questionable whether that is a stable material but I will decision on you here.
We have reverted this patch from our 4.4 based kernel.
Quoted 105 lines · Greg KH
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman <[email protected]>
commit
ba4a648f12f4cd0a8003dd229b6ca8a53348ee4bupstream.In commit
8c272261194d("powerpc/numa: EnableUSE_PERCPU_NUMA_NODE_ID"), we switched to the generic implementation ofcpu_to_node(), which uses a percpu variable to hold the NUMA node for each CPU.Unfortunately we neglected to notice that we use
cpu_to_node()in the allocation of our percpu areas, leading to a chicken and egg problem. In practice what happens is when we are setting up the percpu areas,cpu_to_node()reports that all CPUs are on node 0, so we allocate all percpu areas on node 0.This is visible in the dmesg output, as all pcpu allocs being in group 0:
pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23
pcpu-alloc: [0] 24 25 26 27 [0] 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 [0] 36 37 38 39
pcpu-alloc: [0] 40 41 42 43 [0] 44 45 46 47To fix it we need an
early_cpu_to_node()which can run prior to percpu being setup. We already have thenuma_cpu_lookup_tablewe can use, so just plumb it in. With the patch dmesg output shows two groups, 0 and 1:pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23
pcpu-alloc: [1] 24 25 26 27 [1] 28 29 30 31
pcpu-alloc: [1] 32 33 34 35 [1] 36 37 38 39
pcpu-alloc: [1] 40 41 42 43 [1] 44 45 46 47We can also check the
data_offsetin the paca of various CPUs, with the fix we see:CPU 0:
data_offset=0x0ffe8b0000
CPU 24:data_offset=0x1ffe5b0000And we can see from dmesg that CPU 24 has an allocation on node 1:
node 0: [mem 0x0000000000000000-0x0000000fffffffff]
node 1: [mem 0x0000001000000000-0x0000001fffffffff]Fixes 8c272261194d ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID")Signed-off-by Michael Ellerman <[email protected]>Reviewed-by Nicholas Piggin <[email protected]>Signed-off-by Michael Ellerman <[email protected]>Signed-off-by Greg Kroah-Hartman <[email protected]>--- arch/powerpc/include/asm/topology.h | 14 ++++++++++++++ arch/powerpc/kernel/setup_64.c | 4 ++-- 2 files changed, 16 insertions(+), 2 deletions(-)arch/powerpc/include/asm/topology.h +14
-0@@ -44,8 +44,22 @@ extern void __init dump_numa_cpu_topologextern int sysfs_add_device_to_node (struct device *dev,int nid);extern void sysfs_remove_device_from_node (struct device *dev,int nid); +static inline int early_cpu_to_node (int cpu) +{ +int nid; + + nid = numa_cpu_lookup_table[cpu]; + +/* +* Fall back to node 0 if nid is unset (it should be, except bugs). +* This allows callers to safely do NODE_DATA(early_cpu_to_node(cpu)). +*/ +return (nid <0 ) ?0 : nid; +}#else +static inline int early_cpu_to_node (int cpu) {return 0 ; } +static inline void dump_numa_cpu_topology (void ) {}static inline int sysfs_add_device_to_node (struct device *dev,int nid)arch/powerpc/kernel/setup_64.c +2
-2@@ -751,7 +751,7 @@ void __init setup_arch(char **cmdline_p)static void *__init pcpu_fc_alloc (unsigned int cpu,size_t size,size_t align) { -return __alloc_bootmem_node (NODE_DATA (cpu_to_node (cpu)), size, align, +return __alloc_bootmem_node (NODE_DATA (early_cpu_to_node (cpu)), size, align,__pa (MAX_DMA_ADDRESS )); }@@ -762,7 +762,7 @@ static void __init pcpu_fc_free(void *ptstatic int pcpu_cpu_distance (unsigned int from,unsigned int to) { -if (cpu_to_node (from) ==cpu_to_node (to)) +if (early_cpu_to_node (from) ==early_cpu_to_node (to))return LOCAL_DISTANCE ;else return REMOTE_DISTANCE ;
Signature · 2 lines
Michal Hocko SUSE Labs
Greg Kroah-Hartman
maintainerRe: [PATCH 4.4 66/90] powerpc/numa: Fix percpu allocations to be NUMA aware
Quoted 7 lines · Michal Hocko
JFYI. We have encountered a regression after applying this patch on a large ppc machine. While the patch is the right thing to do it doesn't work well with the current vmalloc area size on ppc and large machines where NUMA nodes are very far from each other. Just for the reference the boot fails on such a machine with bunch of warning preceeding it. See http://lkml.kernel.org/r/[email protected]
Quoted 6 lines
It seems the right thing to do is to enlarge the vmalloc space on ppc but this is not the case in the upstream kernel yet AFAIK. It is also questionable whether that is a stable material but I will decision on you here.
We have reverted this patch from our 4.4 based kernel.
But all is fine on newer kernels? That is odd.
I'll be glad to drop it, but should it be dropped from all stable trees?
thanks,
greg k-h
Re: [PATCH 4.4 66/90] powerpc/numa: Fix percpu allocations to be NUMA aware
Quoted 8 lines · Greg KH
Quoted 7 lines · Michal Hocko
JFYI. We have encountered a regression after applying this patch on a large ppc machine. While the patch is the right thing to do it doesn't work well with the current vmalloc area size on ppc and large machines where NUMA nodes are very far from each other. Just for the reference the boot fails on such a machine with bunch of warning preceeding it. See http://lkml.kernel.org/r/[email protected]
Quoted 8 lines
Quoted 6 lines
It seems the right thing to do is to enlarge the vmalloc space on ppc but this is not the case in the upstream kernel yet AFAIK. It is also questionable whether that is a stable material but I will decision on you here.
We have reverted this patch from our 4.4 based kernel.
But all is fine on newer kernels? That is odd.
Newer kernels do not have enlarged vmalloc space yet AFAIK so they won't work properly eiter. This bug is quite rare though because you need a specific HW configuration to trigger the issue - namely NUMA nodes have to be far away from each other in the physical memory space.
Quoted 1 line
I'll be glad to drop it, but should it be dropped from all stable trees?
Yes from all stable backports.
Signature · 2 lines
Michal Hocko SUSE Labs
Greg Kroah-Hartman
maintainerRe: [PATCH 4.4 66/90] powerpc/numa: Fix percpu allocations to be NUMA aware
Quoted 18 lines · Michal Hocko
Quoted 8 lines · Greg KH
Quoted 7 lines · Michal Hocko
JFYI. We have encountered a regression after applying this patch on a large ppc machine. While the patch is the right thing to do it doesn't work well with the current vmalloc area size on ppc and large machines where NUMA nodes are very far from each other. Just for the reference the boot fails on such a machine with bunch of warning preceeding it. See http://lkml.kernel.org/r/[email protected]
Quoted 8 lines
Quoted 6 lines
It seems the right thing to do is to enlarge the vmalloc space on ppc but this is not the case in the upstream kernel yet AFAIK. It is also questionable whether that is a stable material but I will decision on you here.
We have reverted this patch from our 4.4 based kernel.
But all is fine on newer kernels? That is odd.
Quoted 8 lines
Newer kernels do not have enlarged vmalloc space yet AFAIK so they won't work properly eiter. This bug is quite rare though because you need a specific HW configuration to trigger the issue - namely NUMA nodes have to be far away from each other in the physical memory space.
Quoted 1 line
I'll be glad to drop it, but should it be dropped from all stable trees?
Yes from all stable backports.
Ok, now all reverted, thanks.
greg k-h
Greg Kroah-Hartman
maintainerPATCH 67/90 powerpc/hotplug-mem: Fix missing endian conversion of aa_index
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Bringmann <[email protected]>
commit dc421b200f91930c9c6a9586810ff8c232cf10fc upstream.
When adding or removing memory, the aa_index (affinity value) for the memblock must also be converted to match the endianness of the rest of the 'ibm,dynamic-memory' property. Otherwise, subsequent retrieval of the attribute will likely lead to non-existent nodes, followed by using the default node in the code inappropriately.
--- arch/powerpc/platforms/pseries/hotplug-memory.c | 2 ++ 1 file changed, 2 insertions(+)
arch/powerpc/platforms/pseries/hotplug-memory.c +2 -0
@@ -110,6 +110,7 @@ static struct property *dlpar_clone_drcofor (i =0 ; i < num_lmbs; i++) { lmbs[i].base_addr =be64_to_cpu (lmbs[i].base_addr); lmbs[i].drc_index =be32_to_cpu (lmbs[i].drc_index); + lmbs[i].aa_index =be32_to_cpu (lmbs[i].aa_index); lmbs[i].flags =be32_to_cpu (lmbs[i].flags); }
@@ -553,6 +554,7 @@ static void dlpar_update_drconf_propertyfor (i =0 ; i < num_lmbs; i++) { lmbs[i].base_addr =cpu_to_be64 (lmbs[i].base_addr); lmbs[i].drc_index =cpu_to_be32 (lmbs[i].drc_index); + lmbs[i].aa_index =cpu_to_be32 (lmbs[i].aa_index); lmbs[i].flags =cpu_to_be32 (lmbs[i].flags); }
Greg Kroah-Hartman
maintainerPATCH 68/90 perf/core: Drop kernel samples even though :u is specified
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jin Yao <[email protected]>
commit cc1582c231ea041fbc68861dfaf957eaf902b829 upstream.
When doing sampling, for example:
perf record -e cycles:u ...
On workloads that do a lot of kernel entry/exits we see kernel samples, even though :u is specified. This is due to skid existing.
This might be a security issue because it can leak kernel addresses even though kernel sampling support is disabled.
The patch drops the kernel samples if exclude_kernel is specified.
For example, test on Haswell desktop:
perf record -e cycles:u <mgen> perf report --stdio
Before patch applied:
99.77% mgen mgen [.] buf_read
0.20% mgen mgen [.] rand_buf_init
0.01% mgen [kernel.vmlinux] [k] apic_timer_interrupt
0.00% mgen mgen [.] last_free_elem
0.00% mgen libc-2.23.so [.] __random_r
0.00% mgen libc-2.23.so [.] _int_malloc
0.00% mgen mgen [.] rand_array_init
0.00% mgen [kernel.vmlinux] [k] page_fault
0.00% mgen libc-2.23.so [.] __random
0.00% mgen libc-2.23.so [.] __strcasestr
0.00% mgen ld-2.23.so [.] strcmp
0.00% mgen ld-2.23.so [.] _dl_start
0.00% mgen libc-2.23.so [.] sched_setaffinity@@GLIBC_2.3.4
0.00% mgen ld-2.23.so [.] _startWe can see kernel symbols apic_timer_interrupt and page_fault.
After patch applied:
99.79% mgen mgen [.] buf_read
0.19% mgen mgen [.] rand_buf_init
0.00% mgen libc-2.23.so [.] __random_r
0.00% mgen mgen [.] rand_array_init
0.00% mgen mgen [.] last_free_elem
0.00% mgen libc-2.23.so [.] vfprintf
0.00% mgen libc-2.23.so [.] rand
0.00% mgen libc-2.23.so [.] __random
0.00% mgen libc-2.23.so [.] _int_malloc
0.00% mgen libc-2.23.so [.] _IO_doallocbuf
0.00% mgen ld-2.23.so [.] do_lookup_x
0.00% mgen ld-2.23.so [.] open_verify.constprop.7
0.00% mgen ld-2.23.so [.] _dl_important_hwcaps
0.00% mgen libc-2.23.so [.] sched_setaffinity@@GLIBC_2.3.4
0.00% mgen ld-2.23.so [.] _startThere are only userspace symbols.
--- kernel/events/core.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
kernel/events/core.c +21 -0
@@ -6410,6 +6410,21 @@ static void perf_log_itrace_start(structperf_output_end (&handle); } +static bool sample_is_allowed (struct perf_event *event,struct pt_regs *regs) +{ +/* +* Due to interrupt latency (AKA "skid"), we may enter the +* kernel before taking an overflow, even if the PMU is only +* counting user events. +* To avoid leaking information to userspace, we must always +* reject kernel samples when exclude_kernel is set. +*/ +if (event->attr.exclude_kernel && !user_mode (regs)) +return false; + +return true; +} +/* * Generic event overflow handling, sampling. */
@@ -6457,6 +6472,12 @@ static int __perf_event_overflow(struct }/* +* For security, drop the skid kernel samples if necessary. +*/ +if (!sample_is_allowed (event, regs)) +return ret; + +/* * XXX event_limit might not quite work as expected on inherited * events */
Greg Kroah-Hartman
maintainerPATCH 69/90 drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit f0c62e9878024300319ba2438adc7b06c6b9c448 upstream.
If vmalloc() fails then we need to a bit of cleanup before returning.
--- drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +2 -0
@@ -368,6 +368,8 @@ static void *vmw_local_fifo_reserve(strureturn fifo_state->static_buffer; else { fifo_state->dynamic_buffer =vmalloc (bytes); +if (!fifo_state->dynamic_buffer) + goto out_err;return fifo_state->dynamic_buffer; } }
Greg Kroah-Hartman
maintainerPATCH 70/90 drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vladis Dronov <[email protected]>
commit ee9c4e681ec4f58e42a83cb0c22a0289ade1aacf upstream.
The 'req->mip_levels' parameter in vmw_gb_surface_define_ioctl() is a user-controlled 'uint32_t' value which is used as a loop count limit. This can lead to a kernel lockup and DoS. Add check for 'req->mip_levels'.
References:
https://bugzilla.redhat.com/show_bug.cgi?id=1437431
--- drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/vmwgfx/vmwgfx_surface.c +3 -0
@@ -1293,6 +1293,9 @@ int vmw_gb_surface_define_ioctl(struct dif (req->multisample_count !=0 )return -EINVAL ; +if (req->mip_levels >DRM_VMW_MAX_MIP_LEVELS ) +return -EINVAL ; +if (unlikely (vmw_user_surface_size ==0 )) vmw_user_surface_size =ttm_round_pot (sizeof (*user_srf)) +128 ;
Greg Kroah-Hartman
maintainerPATCH 71/90 drm/vmwgfx: Make sure backup_handle is always valid
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sinclair Yeh <[email protected]>
commit 07678eca2cf9c9a18584e546c2b2a0d0c9a3150c upstream.
When vmw_gb_surface_define_ioctl() is called with an existing buffer, we end up returning an uninitialized variable in the backup_handle.
The fix is to first initialize backup_handle to 0 just to be sure, and second, when a user-provided buffer is found, we will use the req->buffer_handle as the backup_handle.
--- drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-)
drivers/gpu/drm/vmwgfx/vmwgfx_surface.c +11 -7
@@ -1288,7 +1288,7 @@ int vmw_gb_surface_define_ioctl(struct dstruct ttm_object_file *tfile =vmw_fpriv (file_priv)->tfile;int ret;uint32_t size; -uint32_t backup_handle; +uint32_t backup_handle =0 ;if (req->multisample_count !=0 )return -EINVAL ;
@@ -1331,12 +1331,16 @@ int vmw_gb_surface_define_ioctl(struct d ret =vmw_user_dmabuf_lookup (tfile, req->buffer_handle, &res->backup, &user_srf->backup_base); -if (ret ==0 && res->backup->base.num_pages *PAGE_SIZE < - res->backup_size) { -DRM_ERROR ("Surface backup buffer is too small.\n" ); -vmw_dmabuf_unreference (&res->backup); - ret = -EINVAL ; - goto out_unlock; +if (ret ==0 ) { +if (res->backup->base.num_pages *PAGE_SIZE < + res->backup_size) { +DRM_ERROR ("Surface backup buffer is too small.\n" ); +vmw_dmabuf_unreference (&res->backup); + ret = -EINVAL ; + goto out_unlock; + }else { + backup_handle = req->buffer_handle; + } } }else if (req->drm_surface_flags & drm_vmw_surface_flag_create_buffer) ret = vmw_user_dmabuf_alloc(dev_priv, tfile,
Greg Kroah-Hartman
maintainerPATCH 72/90 drm/nouveau/tmr: fully separate alarm execution/pending lists
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Skeggs <[email protected]>
commit b4e382ca7586a63b6c1e5221ce0863ff867c2df6 upstream.
Reusing the list_head for both is a bad idea. Callback execution is done with the lock dropped so that alarms can be rescheduled from the callback, which means that with some unfortunate timing, lists can get corrupted.
The execution list should not require its own locking, the single function that uses it can only be called from a single context.
--- drivers/gpu/drm/nouveau/include/nvkm/subdev/timer.h | 1 + drivers/gpu/drm/nouveau/nvkm/subdev/timer/base.c | 7 ++++--- 2 files changed, 5 insertions(+), 3 deletions(-)
drivers/gpu/drm/nouveau/include/nvkm/subdev/timer.h +1 -0
@@ -4,6 +4,7 @@struct nvkm_alarm {struct list_head head; +struct list_head exec;u64 timestamp;void (*func)(struct nvkm_alarm *); };
drivers/gpu/drm/nouveau/nvkm/subdev/timer/base.c +4 -3
@@ -50,7 +50,8 @@ nvkm_timer_alarm_trigger(struct nvkm_tim/* Move to completed list. We'll drop the lock before * executing the callback so it can reschedule itself. */ -list_move_tail (&alarm->head, &exec); +list_del_init (&alarm->head); +list_add (&alarm->exec, &exec); }/* Shut down interrupt if no more pending alarms. */
@@ -59,8 +60,8 @@ nvkm_timer_alarm_trigger(struct nvkm_timspin_unlock_irqrestore (&tmr->lock, flags);/* Execute completed callbacks. */ -list_for_each_entry_safe (alarm, atemp, &exec, head) { -list_del_init (&alarm->head); +list_for_each_entry_safe (alarm, atemp, &exec, exec) { +list_del (&alarm->exec); alarm->func (alarm); } }
Greg Kroah-Hartman
maintainerPATCH 73/90 ALSA: timer: Fix race between read and ioctl
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit d11662f4f798b50d8c8743f433842c3e40fe3378 upstream.
The read from ALSA timer device, the function snd_timer_user_tread(), may access to an uninitialized struct snd_timer_user fields when the read is concurrently performed while the ioctl like snd_timer_user_tselect() is invoked. We have already fixed the races among ioctls via a mutex, but we seem to have forgotten the race between read vs ioctl.
This patch simply applies (more exactly extends the already applied range of) tu->ioctl_lock in snd_timer_user_tread() for closing the race window.
--- sound/core/timer.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
sound/core/timer.c +4 -2
@@ -1958,6 +1958,7 @@ static ssize_t snd_timer_user_read(struc tu = file->private_data; unit = tu->tread ?sizeof (struct snd_timer_tread ) :sizeof (struct snd_timer_read ); +mutex_lock (&tu->ioctl_lock);spin_lock_irq (&tu->qlock);while ((long )count - result >= unit) {while (!tu->qused) {
@@ -1973,7 +1974,9 @@ static ssize_t snd_timer_user_read(strucadd_wait_queue (&tu->qchange_sleep, &wait);spin_unlock_irq (&tu->qlock); +mutex_unlock (&tu->ioctl_lock);schedule (); +mutex_lock (&tu->ioctl_lock);spin_lock_irq (&tu->qlock);remove_wait_queue (&tu->qchange_sleep, &wait);
@@ -1993,7 +1996,6 @@ static ssize_t snd_timer_user_read(struc tu->qused--;spin_unlock_irq (&tu->qlock); -mutex_lock (&tu->ioctl_lock);if (tu->tread) {if (copy_to_user (buffer, &tu->tqueue[qhead],sizeof (struct snd_timer_tread )))
@@ -2003,7 +2005,6 @@ static ssize_t snd_timer_user_read(struc sizeof(struct snd_timer_read))) err = -EFAULT ; } -mutex_unlock (&tu->ioctl_lock);spin_lock_irq (&tu->qlock);if (err <0 )
@@ -2013,6 +2014,7 @@ static ssize_t snd_timer_user_read(struc } _error:spin_unlock_irq (&tu->qlock); +mutex_unlock (&tu->ioctl_lock);return result >0 ? result : err; }
Greg Kroah-Hartman
maintainerPATCH 74/90 ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit ba3021b2c79b2fa9114f92790a99deb27a65b728 upstream.
snd_timer_user_tselect() reallocates the queue buffer dynamically, but it forgot to reset its indices. Since the read may happen concurrently with ioctl and snd_timer_user_tselect() allocates the buffer via kmalloc(), this may lead to the leak of uninitialized kernel-space data, as spotted via KMSAN:
BUG: KMSAN: use of unitialized memory in snd_timer_user_read+0x6c4/0xa10 CPU: 0 PID: 1037 Comm: probe Not tainted 4.11.0-rc5+ #2739 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x143/0x1b0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007 kmsan_check_memory+0xc2/0x140 mm/kmsan/kmsan.c:1086 copy_to_user ./arch/x86/include/asm/uaccess.h:725 snd_timer_user_read+0x6c4/0xa10 sound/core/timer.c:2004 do_loop_readv_writev fs/read_write.c:716 __do_readv_writev+0x94c/0x1380 fs/read_write.c:864 do_readv_writev fs/read_write.c:894 vfs_readv fs/read_write.c:908 do_readv+0x52a/0x5d0 fs/read_write.c:934 SYSC_readv+0xb6/0xd0 fs/read_write.c:1021 SyS_readv+0x87/0xb0 fs/read_write.c:1018
This patch adds the missing reset of queue indices. Together with the previous fix for the ioctl/read race, we cover the whole problem.
--- sound/core/timer.c | 1 + 1 file changed, 1 insertion(+)
sound/core/timer.c +1 -0
@@ -1621,6 +1621,7 @@ static int snd_timer_user_tselect(structif (err <0 ) goto __err; + tu->qhead = tu->qtail = tu->qused =0 ;kfree (tu->queue); tu->queue =NULL ;kfree (tu->tqueue);
Greg Kroah-Hartman
maintainerPATCH 75/90 ASoC: Fix use-after-free at card unregistration
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 4efda5f2130da033aeedc5b3205569893b910de2 upstream.
soc_cleanup_card_resources() call snd_card_free() at the last of its procedure. This turned out to lead to a use-after-free. PCM runtimes have been already removed via soc_remove_pcm_runtimes(), while it's dereferenced later in soc_pcm_free() called via snd_card_free().
The fix is simple: just move the snd_card_free() call to the beginning of the whole procedure. This also gives another benefit: it guarantees that all operations have been shut down before actually releasing the resources, which was racy until now.
--- sound/soc/soc-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
sound/soc/soc-core.c +3 -2
@@ -1775,6 +1775,9 @@ static int soc_cleanup_card_resources(stfor (i =0 ; i < card->num_aux_devs; i++)soc_remove_aux_dev (card, i); +/* free the ALSA card at first; this syncs with pending operations */ +snd_card_free (card->snd_card); +/* remove and free each DAI */ soc_remove_dai_links (card);
@@ -1786,9 +1789,7 @@ static int soc_cleanup_card_resources(stsnd_soc_dapm_free (&card->dapm); -snd_card_free (card->snd_card);return 0 ; - }/* removes a socdev */
Greg Kroah-Hartman
maintainerPATCH 76/90 drivers: char: mem: Fix wraparound check to allow mappings up to the end
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julius Werner <[email protected]>
commit 32829da54d9368103a2f03269a5120aa9ee4d5da upstream.
A recent fix to /dev/mem prevents mappings from wrapping around the end of physical address space. However, the check was written in a way that also prevents a mapping reaching just up to the end of physical address space, which may be a valid use case (especially on 32-bit systems). This patch fixes it by checking the last mapped address (instead of the first address behind that) for overflow.
--- drivers/char/mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/char/mem.c +1 -1
@@ -346,7 +346,7 @@ static int mmap_mem(struct file *file, sphys_addr_t offset = (phys_addr_t )vma->vm_pgoff <<PAGE_SHIFT ;/* It's illegal to wrap around the end of the physical address space. */ -if (offset + (phys_addr_t )size < offset) +if (offset + (phys_addr_t )size -1 < offset)return -EINVAL ;if (!valid_mmap_phys_addr_range (vma->vm_pgoff, size))
Greg Kroah-Hartman
maintainerPATCH 77/90 tty: Drop krefs for interrupted tty lock
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Hurley <[email protected]>
commit e9036d0662360cd4c79578565ce422ed5872f301 upstream.
When the tty lock is interrupted on attempted re-open, 2 tty krefs are still held. Drop extra kref before returning failure from tty_lock_interruptible(), and drop lookup kref before returning failure from tty_open().
--- drivers/tty/tty_io.c | 3 +-- drivers/tty/tty_mutex.c | 7 ++++++- 2 files changed, 7 insertions(+), 3 deletions(-)
drivers/tty/tty_io.c +1 -2
@@ -2070,13 +2070,12 @@ retry_open:if (tty) {mutex_unlock (&tty_mutex); retval =tty_lock_interruptible (tty); +tty_kref_put (tty);/* drop kref from tty_driver_lookup_tty() */ if (retval) {if (retval == -EINTR ) retval = -ERESTARTSYS ; goto err_unref; } -/* safe to drop the kref from tty_driver_lookup_tty() */ -tty_kref_put (tty); retval =tty_reopen (tty);if (retval <0 ) {tty_unlock (tty);
drivers/tty/tty_mutex.c +6 -1
@@ -24,10 +24,15 @@ EXPORT_SYMBOL(tty_lock);int tty_lock_interruptible (struct tty_struct *tty) { +int ret; +if (WARN (tty->magic !=TTY_MAGIC ,"L Bad %p\n" , tty))return -EIO ;tty_kref_get (tty); -return mutex_lock_interruptible (&tty->legacy_mutex); + ret =mutex_lock_interruptible (&tty->legacy_mutex); +if (ret) +tty_kref_put (tty); +return ret; } void __lockfunc tty_unlock(struct tty_struct *tty)
Greg Kroah-Hartman
maintainerPATCH 78/90 serial: sh-sci: Fix panic when serial console and DMA are enabled
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takatoshi Akiyama <[email protected]>
commit 3c9101766b502a0163d1d437fada5801cf616be2 upstream.
This patch fixes an issue that kernel panic happens when DMA is enabled and we press enter key while the kernel booting on the serial console.
* An interrupt may occur after sci_request_irq().
* DMA transfer area is initialized by setup_timer() in sci_request_dma() and used in interrupt.
If an interrupt occurred between sci_request_irq() and setup_timer() in sci_request_dma(), DMA transfer area has not been initialized yet. So, this patch changes the order of sci_request_irq() and sci_request_dma().
--- drivers/tty/serial/sh-sci.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/tty/serial/sh-sci.c +6 -4
@@ -1800,11 +1800,13 @@ static int sci_startup(struct uart_portdev_dbg (port->dev,"%s(%d)\n" , __func__, port->line); +sci_request_dma (port); + ret =sci_request_irq (s); -if (unlikely (ret <0 )) +if (unlikely (ret <0 )) { +sci_free_dma (port);return ret; - -sci_request_dma (port); + }spin_lock_irqsave (&port->lock, flags);sci_start_tx (port);
@@ -1834,8 +1836,8 @@ static void sci_shutdown(struct uart_por }#endif -sci_free_dma (port);sci_free_irq (s); +sci_free_dma (port); } static unsigned int sci_scbrr_calc(struct sci_port *s, unsigned int bps,
Greg Kroah-Hartman
maintainerPATCH 79/90 net: better skb->sender_cpu and skb->napi_id cohabitation
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
commit 52bd2d62ce6758d811edcbd2256eb9ea7f6a56cb upstream.
skb->sender_cpu and skb->napi_id share a common storage, and we had various bugs about this.
We had to call skb_sender_cpu_clear() in some places to not leave a prior skb->napi_id and fool netdev_pick_tx()
As suggested by Alexei, we could split the space so that these errors can not happen.
0 value being reserved as the common (not initialized) value, let's reserve [1 .. NR_CPUS] range for valid sender_cpu, and [NR_CPUS+1 .. ~0U] for valid napi_id.
This will allow proper busy polling support over tunnels.
--- include/linux/skbuff.h | 3 --- net/core/dev.c | 33 ++++++++++++++++----------------- 2 files changed, 16 insertions(+), 20 deletions(-)
include/linux/skbuff.h +0 -3
@@ -1084,9 +1084,6 @@ static inline void skb_copy_hash(structstatic inline void skb_sender_cpu_clear (struct sk_buff *skb) { -#ifdef CONFIG_XPS - skb->sender_cpu =0 ; -#endif }#ifdef NET_SKBUFF_DATA_USES_OFFSET
net/core/dev.c +16 -17
@@ -182,7 +182,7 @@ EXPORT_SYMBOL(dev_base_lock);/* protects napi_hash addition/deletion and napi_gen_id */ static DEFINE_SPINLOCK (napi_hash_lock); -static unsigned int napi_gen_id; +static unsigned int napi_gen_id =NR_CPUS ; static DEFINE_HASHTABLE(napi_hash, 8);static seqcount_t devnet_rename_seq;
@@ -3049,7 +3049,9 @@ struct netdev_queue *netdev_pick_tx(struint queue_index =0 ;#ifdef CONFIG_XPS -if (skb->sender_cpu ==0 ) +u32 sender_cpu = skb->sender_cpu -1 ; + +if (sender_cpu >= (u32 )NR_CPUS ) skb->sender_cpu =raw_smp_processor_id () +1 ;#endif
@@ -4726,25 +4728,22 @@ EXPORT_SYMBOL_GPL(napi_by_id);void napi_hash_add (struct napi_struct *napi) { -if (!test_and_set_bit (NAPI_STATE_HASHED , &napi->state)) { +if (test_and_set_bit (NAPI_STATE_HASHED , &napi->state)) +return ; -spin_lock (&napi_hash_lock); +spin_lock (&napi_hash_lock); -/* 0 is not a valid id, we also skip an id that is taken -* we expect both events to be extremely rare -*/ - napi->napi_id =0 ; -while (!napi->napi_id) { - napi->napi_id = ++napi_gen_id; -if (napi_by_id (napi->napi_id)) - napi->napi_id =0 ; - } +/* 0..NR_CPUS+1 range is reserved for sender_cpu use */ +do { +if (unlikely (++napi_gen_id <NR_CPUS +1 )) + napi_gen_id =NR_CPUS +1 ; + }while (napi_by_id (napi_gen_id)); + napi->napi_id = napi_gen_id; -hlist_add_head_rcu (&napi->napi_hash_node, - &napi_hash[napi->napi_id %HASH_SIZE (napi_hash)]); +hlist_add_head_rcu (&napi->napi_hash_node, + &napi_hash[napi->napi_id %HASH_SIZE (napi_hash)]); -spin_unlock (&napi_hash_lock); - } +spin_unlock (&napi_hash_lock); }EXPORT_SYMBOL_GPL (napi_hash_add);
Greg Kroah-Hartman
maintainerPATCH 80/90 mm: consider memblock reservations for deferred memory initialization sizing
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Hocko <[email protected]>
commit 864b9a393dcb5aed09b8fd31b9bbda0fdda99374 upstream.
We have seen an early OOM killer invocation on ppc64 systems with crashkernel=4096M:
kthreadd invoked oom-killer: gfp_mask=0x16040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK), nodemask=7, order=0, oom_score_adj=0 kthreadd cpuset=/ mems_allowed=7 CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.4.68-1.gd7fe927-default #1 Call Trace: dump_stack+0xb0/0xf0 (unreliable) dump_header+0xb0/0x258 out_of_memory+0x5f0/0x640 __alloc_pages_nodemask+0xa8c/0xc80 kmem_getpages+0x84/0x1a0 fallback_alloc+0x2a4/0x320 kmem_cache_alloc_node+0xc0/0x2e0 copy_process.isra.25+0x260/0x1b30 _do_fork+0x94/0x470 kernel_thread+0x48/0x60 kthreadd+0x264/0x330 ret_from_kernel_thread+0x5c/0xa4 Mem-Info: active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:0 dirty:0 writeback:0 unstable:0 slab_reclaimable:5 slab_unreclaimable:73 mapped:0 shmem:0 pagetables:0 bounce:0 free:0 free_pcp:0 free_cma:0 Node 7 DMA free:0kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:52428800kB managed:110016kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:320kB slab_unreclaimable:4672kB kernel_stack:1152kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes lowmem_reserve[]: 0 0 0 0 Node 7 DMA: 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 0kB 0 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 0kB Total swap = 0kB 819200 pages RAM 0 pages HighMem/MovableOnly 817481 pages reserved 0 pages cma reserved 0 pages hwpoisoned
the reason is that the managed memory is too low (only 110MB) while the rest of the the 50GB is still waiting for the deferred intialization to be done. update_defer_init estimates the initial memoty to initialize to 2GB at least but it doesn't consider any memory allocated in that range. In this particular case we've had
Reserving 4096MB of memory at 128MB for crashkernel (System RAM: 51200MB)
so the low 2GB is mostly depleted.
Fix this by considering memblock allocations in the initial static initialization estimation. Move the max_initialise to reset_deferred_meminit and implement a simple memblock_reserved_memory helper which iterates all reserved blocks and sums the size of all that start below the given address. The cumulative size is than added on top of the initial estimation. This is still not ideal because reset_deferred_meminit doesn't consider holes and so reservation might be above the initial estimation whihch we ignore but let's make the logic simpler until we really need to handle more complicated cases.
--- include/linux/memblock.h | 8 ++++++++ include/linux/mmzone.h | 1 + mm/memblock.c | 24 ++++++++++++++++++++++++ mm/page_alloc.c | 25 ++++++++++++++++++++++--- 4 files changed, 55 insertions(+), 3 deletions(-)
include/linux/memblock.h +8 -0
@@ -408,11 +408,19 @@ static inline void early_memtest(phys_ad }#endif +extern unsigned long memblock_reserved_memory_within (phys_addr_t start_addr, +phys_addr_t end_addr);#else static inline phys_addr_t memblock_alloc (phys_addr_t size,phys_addr_t align) {return 0 ; } + +static inline unsigned long memblock_reserved_memory_within (phys_addr_t start_addr, +phys_addr_t end_addr) +{ +return 0 ; +}#endif /* CONFIG_HAVE_MEMBLOCK */
include/linux/mmzone.h +1 -0
@@ -688,6 +688,7 @@ typedef struct pglist_data {* is the first PFN that needs to be initialised. */ unsigned long first_deferred_pfn; +unsigned long static_init_size;#endif /* CONFIG_DEFERRED_STRUCT_PAGE_INIT */ } pg_data_t;
mm/memblock.c +24 -0
@@ -1634,6 +1634,30 @@ static void __init_memblock memblock_dum } } +extern unsigned long __init_memblock +memblock_reserved_memory_within (phys_addr_t start_addr,phys_addr_t end_addr) +{ +struct memblock_type *type = &memblock.reserved; +unsigned long size =0 ; +int idx; + +for (idx =0 ; idx < type->cnt; idx++) { +struct memblock_region *rgn = &type->regions[idx]; +phys_addr_t start, end; + +if (rgn->base + rgn->size < start_addr) +continue ; +if (rgn->base > end_addr) +continue ; + + start = rgn->base; + end = start + rgn->size; + size += end - start; + } + +return size; +} + void __init_memblock __memblock_dump_all(void) {pr_info ("MEMBLOCK configuration:\n" );
mm/page_alloc.c +22 -3
@@ -269,6 +269,26 @@ int page_group_by_mobility_disabled __re#ifdef CONFIG_DEFERRED_STRUCT_PAGE_INIT static inline void reset_deferred_meminit (pg_data_t *pgdat) { +unsigned long max_initialise; +unsigned long reserved_lowmem; + +/* +* Initialise at least 2G of a node but also take into account that +* two large system hashes that can take up 1GB for 0.25TB/node. +*/ + max_initialise =max (2UL << (30 -PAGE_SHIFT ), + (pgdat->node_spanned_pages >>8 )); + +/* +* Compensate the all the memblock reservations (e.g. crash kernel) +* from the initial estimation to make sure we will initialize enough +* memory to boot. +*/ + reserved_lowmem =memblock_reserved_memory_within (pgdat->node_start_pfn, + pgdat->node_start_pfn + max_initialise); + max_initialise += reserved_lowmem; + + pgdat->static_init_size =min (max_initialise, pgdat->node_spanned_pages); pgdat->first_deferred_pfn =ULONG_MAX ; }
@@ -302,10 +322,9 @@ static inline bool update_defer_init(pg_/* Always populate low zones for address-contrained allocations */ if (zone_end <pgdat_end_pfn (pgdat))return true; -/* Initialise at least 2G of the highest zone */ (*nr_initialised)++; -if (*nr_initialised > (2UL << (30 -PAGE_SHIFT )) && +if ((*nr_initialised > pgdat->static_init_size) && (pfn & (PAGES_PER_SECTION -1 )) ==0 ) { pgdat->first_deferred_pfn = pfn;return false;
@@ -5343,7 +5362,6 @@ void __paginginit free_area_init_node(in/* pg_data_t should be reset to zero when it's allocated */ WARN_ON (pgdat->nr_zones || pgdat->classzone_idx); -reset_deferred_meminit (pgdat); pgdat->node_id = nid; pgdat->node_start_pfn = node_start_pfn;#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
@@ -5362,6 +5380,7 @@ void __paginginit free_area_init_node(in (unsigned long)pgdat->node_mem_map);#endif +reset_deferred_meminit (pgdat);free_area_init_core (pgdat); }
Greg Kroah-Hartman
maintainerPATCH 81/90 NFS: Ensure we revalidate attributes before using execute_ok()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit 5c5fc09a1157a11dbe84e6421c3e0b37d05238cb upstream.
Donald Buczek reports that NFS clients can also report incorrect results for access() due to lack of revalidation of attributes before calling execute_ok().
Looking closely, it seems chdir() is afflicted with the same problem.
Fix is to ensure we call nfs_revalidate_inode_rcu() or nfs_revalidate_inode() as appropriate before deciding to trust execute_ok().
--- fs/nfs/dir.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
fs/nfs/dir.c +16 -2
@@ -2421,6 +2421,20 @@ int nfs_may_open(struct inode *inode, st }EXPORT_SYMBOL_GPL (nfs_may_open); +static int nfs_execute_ok (struct inode *inode,int mask) +{ +struct nfs_server *server =NFS_SERVER (inode); +int ret; + +if (mask &MAY_NOT_BLOCK ) + ret =nfs_revalidate_inode_rcu (server, inode); +else + ret =nfs_revalidate_inode (server, inode); +if (ret ==0 && !execute_ok (inode)) + ret = -EACCES ; +return ret; +} +int nfs_permission (struct inode *inode,int mask) {struct rpc_cred *cred;
@@ -2470,8 +2484,8 @@ force_lookup: res =PTR_ERR (cred); } out: -if (!res && (mask &MAY_EXEC ) && !execute_ok (inode)) - res = -EACCES ; +if (!res && (mask &MAY_EXEC )) + res =nfs_execute_ok (inode, mask);dfprintk (VFS ,"NFS: permission(%s/%lu), mask=0x%x, res=%d\n" , inode->i_sb->s_id, inode->i_ino, mask, res);
Greg Kroah-Hartman
maintainerPATCH 82/90 NFSv4: Dont perform cached access checks before weve OPENed the file
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit 762674f86d0328d5dc923c966e209e1ee59663f2 upstream.
Donald Buczek reports that a nfs4 client incorrectly denies execute access based on outdated file mode (missing 'x' bit). After the mode on the server is 'fixed' (chmod +x) further execution attempts continue to fail, because the nfs ACCESS call updates the access parameter but not the mode parameter or the mode in the inode.
The root cause is ultimately that the VFS is calling may_open() before the NFS client has a chance to OPEN the file and hence revalidate the access and attribute caches.
Al Viro suggests:
Quoted 11 lines
Quoted 7 lines
Quoted 2 lines
Make
nfs_permission()relax the checks when it seesMAY_OPEN, if you know that things will be caught by server anyway?That can work as long as we're guaranteed that everything that calls
inode_permission()withMAY_OPENon a regular file will also follow up with avfs_open()ordentry_open()on success. Is this always the case?1) in
do_tmpfile(), followed bydo_dentry_open()(not reachable by NFS since it doesn't have ->tmpfile() instance anyway)
Quoted 6 lines
2) in
atomic_open(), after the call of ->atomic_open() has succeeded.3) in
do_last(), followed on success byvfs_open()That's all. All calls of
inode_permission()that getMAY_OPENcome frommay_open(), and there's no other callers of that puppy.
--- fs/nfs/dir.c | 3 +++ 1 file changed, 3 insertions(+)
fs/nfs/dir.c +3 -0
@@ -2452,6 +2452,9 @@ int nfs_permission(struct inode *inode,case S_IFLNK : goto out;case S_IFREG : +if ((mask &MAY_OPEN ) && +nfs_server_capable (inode,NFS_CAP_ATOMIC_OPEN )) +return 0 ;break ;case S_IFDIR :/*
Greg Kroah-Hartman
maintainerPATCH 83/90 Make __xfs_xattr_put_listen preperly report errors.
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Artem Savkov <[email protected]>
commit 791cc43b36eb1f88166c8505900cad1b43c7fe1a upstream.
Commit 2a6fba6 "xfs: only return -errno or success from attr ->put_listent" changes the returnvalue of __xfs_xattr_put_listen to 0 in case when there is insufficient space in the buffer assuming that setting context->count to -1 would be enough, but all of the ->put_listent callers only check seen_enough. This results in a failed assertion:
XFS: Assertion failed: context->count >= 0, file: fs/xfs/xfs_xattr.c, line: 175 in insufficient buffer size case.
This is only reproducible with at least 2 xattrs and only when the buffer gets depleted before the last one.
Furthermore if buffersize is such that it is enough to hold the last xattr's name, but not enough to hold the sum of preceeding xattr names listxattr won't fail with ERANGE, but will suceed returning last xattr's name without the first character. The first character end's up overwriting data stored at (context->alist - 1).
--- fs/xfs/xfs_xattr.c | 1 + 1 file changed, 1 insertion(+)
fs/xfs/xfs_xattr.c +1 -0
@@ -180,6 +180,7 @@ xfs_xattr_put_listent( arraytop = context->count + prefix_len + namelen +1 ;if (arraytop > context->firstu) { context->count =-1 ;/* insufficient space */ + context->seen_enough =1 ;return 0 ; } offset = (char *)context->alist + context->count;
Greg Kroah-Hartman
maintainerPATCH 84/90 arm64: hw_breakpoint: fix watchpoint matching for tagged pointers
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kristina Martsenko <[email protected]>
commit 7dcd9dd8cebe9fa626af7e2358d03a37041a70fb upstream.
This backport has a few small differences from the upstream commit:
- The address tag is removed in watchpoint_handler() instead of get_distance_from_watchpoint(), because 4.4 does not have commit fdfeff0f9e3d ("arm64: hw_breakpoint: Handle inexact watchpoint addresses").
- A macro is backported (untagged_addr), as it is not present in 4.4.
Original patch description:
When we take a watchpoint exception, the address that triggered the watchpoint is found in FAR_EL1. We compare it to the address of each configured watchpoint to see which one was hit.
The configured watchpoint addresses are untagged, while the address in FAR_EL1 will have an address tag if the data access was done using a tagged address. The tag needs to be removed to compare the address to the watchpoints.
Currently we don't remove it, and as a result can report the wrong watchpoint as being hit (specifically, always either the highest TTBR0 watchpoint or lowest TTBR1 watchpoint). This patch removes the tag.
--- arch/arm64/include/asm/uaccess.h | 8 ++++++++ arch/arm64/kernel/hw_breakpoint.c | 3 ++- 2 files changed, 10 insertions(+), 1 deletion(-)
arch/arm64/include/asm/uaccess.h +8 -0
@@ -21,6 +21,7 @@/* * User space memory access functions */ +#include <linux/bitops.h> #include <linux/string.h> #include <linux/thread_info.h>
@@ -103,6 +104,13 @@ static inline void set_fs(mm_segment_t f flag; \ }) +/* +* When dealing with data aborts, watchpoints, or instruction traps we may end +* up with a tagged userland pointer. Clear the tag to get a sane pointer to +* pass on to access_ok(), for instance. +*/ +#define untagged_addr (addr) sign_extend64(addr, 55) +#define access_ok (type, addr, size) __range_ok(addr, size)#define user_addr_max get_fs
arch/arm64/kernel/hw_breakpoint.c +2 -1
@@ -35,6 +35,7 @@#include <asm/traps.h> #include <asm/cputype.h> #include <asm/system_misc.h> +#include <asm/uaccess.h> /* Breakpoint currently in use for each BRP. */ static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]);
@@ -690,7 +691,7 @@ static int watchpoint_handler(unsigned l/* Check if the watchpoint value matches. */ val =read_wb_reg (AARCH64_DBG_REG_WVR , i); -if (val != (addr & ~alignment_mask)) +if (val != (untagged_addr (addr) & ~alignment_mask)) goto unlock;/* Possible match, check the byte address select to confirm. */
Greg Kroah-Hartman
maintainerPATCH 85/90 arm64: entry: improve data abort handling of tagged pointers
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kristina Martsenko <[email protected]>
commit 276e93279a630657fff4b086ba14c95955912dfa upstream.
This backport has a minor difference from the upstream commit: it adds the asm-uaccess.h file, which is not present in 4.4, because 4.4 does not have commit b4b8664d291a ("arm64: don't pull uaccess.h into *.S").
Original patch description:
When handling a data abort from EL0, we currently zero the top byte of the faulting address, as we assume the address is a TTBR0 address, which may contain a non-zero address tag. However, the address may be a TTBR1 address, in which case we should not zero the top byte. This patch fixes that. The effect is that the full TTBR1 address is passed to the task's signal handler (or printed out in the kernel log).
When handling a data abort from EL1, we leave the faulting address intact, as we assume it's either a TTBR1 address or a TTBR0 address with tag 0x00. This is true as far as I'm aware, we don't seem to access a tagged TTBR0 address anywhere in the kernel. Regardless, it's easy to forget about address tags, and code added in the future may not always remember to remove tags from addresses before accessing them. So add tag handling to the EL1 data abort handler as well. This also makes it consistent with the EL0 data abort handler.
--- arch/arm64/include/asm/asm-uaccess.h | 13 +++++++++++++ arch/arm64/kernel/entry.S | 6 ++++-- 2 files changed, 17 insertions(+), 2 deletions(-)
arch/arm64/include/asm/asm-uaccess.h new file +13 -0
@@ -0,0 +1,13 @@ +#ifndef __ASM_ASM_UACCESS_H +#define __ASM_ASM_UACCESS_H + +/* +* Remove the address tag from a virtual address, if present. +*/ + .macro clear_address_tag, dst, addr + tst \addr, #(1 << 55) + bic \dst, \addr, #(0xff << 56) + csel \dst, \dst, \addr, eq + .endm + +#endif
arch/arm64/kernel/entry.S +4 -2
@@ -29,6 +29,7 @@ #include <asm/esr.h> #include <asm/memory.h> #include <asm/thread_info.h> +#include <asm/asm-uaccess.h> #include <asm/unistd.h> /*
@@ -316,12 +317,13 @@ el1_da: /* * Data abort handling */ - mrs x0, far_el1 + mrs x3, far_el1 enable_dbg // re-enable interrupts if they were enabled in the aborted context tbnz x23, #7, 1f // PSR_I_BIT enable_irq 1: + clear_address_tag x0, x3 mov x2, sp // struct pt_regs bl do_mem_abort
@@ -483,7 +485,7 @@ el0_da: // enable interrupts before calling the main handler enable_dbg_and_irq ct_user_exit - bic x0, x26, #(0xff << 56) + clear_address_tag x0, x26 mov x1, x25 mov x2, sp bl do_mem_abort
Greg Kroah-Hartman
maintainerPATCH 86/90 RDMA/qib,hfi1: Fix MR reference count leak on write with immediate
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Marciniszyn <[email protected]>
commit 1feb40067cf04ae48d65f728d62ca255c9449178 upstream.
The handling of IB_RDMA_WRITE_ONLY_WITH_IMMEDIATE will leak a memory reference when a buffer cannot be allocated for returning the immediate data.
The issue is that the rkey validation has already occurred and the RNR nak fails to release the reference that was fruitlessly gotten. The the peer will send the identical single packet request when its RNR timer pops.
The fix is to release the held reference prior to the rnr nak exit. This is the only sequence the requires both rkey validation and the buffer allocation on the same packet.
--- drivers/infiniband/hw/qib/qib_rc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/infiniband/hw/qib/qib_rc.c +3 -1
@@ -2088,8 +2088,10 @@ send_last: ret =qib_get_rwqe (qp,1 );if (ret <0 ) goto nack_op_err; -if (!ret) +if (!ret) { +qib_put_ss (&qp->r_sge); goto rnr_nak; + } wc.ex.imm_data = ohdr->u.rc.imm_data; hdrsize +=4 ; wc.wc_flags =IB_WC_WITH_IMM ;
Greg Kroah-Hartman
maintainerPATCH 87/90 tracing: Use strlcpy() instead of strcpy() in __trace_find_cmdline()
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amey Telawane <[email protected]>
commit e09e28671cda63e6308b31798b997639120e2a21 upstream.
Strcpy is inherently not safe, and strlcpy() should be used instead. __trace_find_cmdline() uses strcpy() because the comms saved must have a terminating nul character, but it doesn't hurt to add the extra protection of using strlcpy() instead of strcpy().
[AmitP: Cherry-picked this commit from CodeAurora kernel/msm-3.10
https://source.codeaurora.org/quic/la/kernel/msm-3.10/commit/?id=2161ae9a70b12cf18ac8e5952a20161ffbccb477]
--- kernel/trace/trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/trace/trace.c +1 -1
@@ -1617,7 +1617,7 @@ static void __trace_find_cmdline(int pid map = savedcmd->map_pid_to_cmdline[pid];if (map !=NO_CMDLINE_MAP ) -strcpy (comm,get_saved_cmdlines (map)); +strlcpy (comm,get_saved_cmdlines (map),TASK_COMM_LEN );else strcpy (comm,"<...>" ); }
Greg Kroah-Hartman
maintainerPATCH 88/90 usercopy: Adjust tests to deal with SMAP/PAN
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <[email protected]>
commit f5f893c57e37ca730808cb2eee3820abd05e7507 upstream.
Under SMAP/PAN/etc, we cannot write directly to userspace memory, so this rearranges the test bytes to get written through copy_to_user(). Additionally drops the bad copy_from_user() test that would trigger a memcpy() against userspace on failure.
[arnd: the test module was added in 3.14, and this backported patch
should apply cleanly on all version from 3.14 to 4.10. The original patch was in 4.11 on top of a context change I saw the bug triggered with kselftest on a 4.4.y stable kernel]
--- lib/test_user_copy.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)
lib/test_user_copy.c +18 -2
@@ -58,7 +58,9 @@ static int __init test_user_copy_init(vo usermem = (char __user *)user_addr; bad_usermem = (char *)user_addr; -/* Legitimate usage: none of these should fail. */ +/* +* Legitimate usage: none of these copies should fail. +*/ ret |=test (copy_from_user (kmem, usermem,PAGE_SIZE ),"legitimate copy_from_user failed" ); ret |= test(copy_to_user(usermem, kmem, PAGE_SIZE),
@@ -68,19 +70,33 @@ static int __init test_user_copy_init(vo ret |=test (put_user (value, (unsigned long __user *)usermem),"legitimate put_user failed" ); -/* Invalid usage: none of these should succeed. */ +/* +* Invalid usage: none of these copies should succeed. +*/ + +/* Reject kernel-to-kernel copies through copy_from_user(). */ ret |=test (!copy_from_user (kmem, (char __user *)(kmem +PAGE_SIZE ),PAGE_SIZE ),"illegal all-kernel copy_from_user passed" ); + +#if 0 +/* +* When running with SMAP/PAN/etc, this will Oops the kernel +* due to the zeroing of userspace memory on failure. This needs +* to be tested in LKDTM instead, since this test module does not +* expect to explode. +*/ ret |=test (!copy_from_user (bad_usermem, (char __user *)kmem,PAGE_SIZE ),"illegal reversed copy_from_user passed" ); +#endif ret |=test (!copy_to_user ((char __user *)kmem, kmem +PAGE_SIZE ,PAGE_SIZE ),"illegal all-kernel copy_to_user passed" ); ret |=test (!copy_to_user ((char __user *)kmem, bad_usermem,PAGE_SIZE ),"illegal reversed copy_to_user passed" ); + ret |=test (!get_user (value, (unsigned long __user *)kmem),"illegal get_user passed" ); ret |= test(!put_user(value, (unsigned long __user *)kmem),
Greg Kroah-Hartman
maintainerPATCH 89/90 arm64: armv8_deprecated: ensure extension of addr
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Rutland <[email protected]>
commit 55de49f9aa17b0b2b144dd2af587177b9aadf429 upstream.
Our compat swp emulation holds the compat user address in an unsigned int, which it passes to __user_swpX_asm(). When a 32-bit value is passed in a register, the upper 32 bits of the register are unknown, and we must extend the value to 64 bits before we can use it as a base address.
This patch casts the address to unsigned long to ensure it has been suitably extended, avoiding the potential issue, and silencing a related warning from clang.
--- arch/arm64/kernel/armv8_deprecated.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm64/kernel/armv8_deprecated.c +2 -1
@@ -305,7 +305,8 @@ static void register_insn_emulation_syscALTERNATIVE ("nop" ,SET_PSTATE_PAN (1 ),ARM64_HAS_PAN , \CONFIG_ARM64_PAN ) \ : "=&r" (res), "+r" (data), "=&r" (temp) \ -: " r" (addr), " i" (-EAGAIN), " i" (-EFAULT) \ +: " r" ((unsigned long)addr), " i" (-EAGAIN), \ +" i" (-EFAULT) \ : "memory") #define __user_swp_asm(data, addr, res, temp) \
Greg Kroah-Hartman
maintainerPATCH 90/90 arm64: ensure extension of smp_store_release value
In reply to Greg Kroah-Hartman4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Rutland <[email protected]>
commit 994870bead4ab19087a79492400a5478e2906196 upstream.
When an inline assembly operand's type is narrower than the register it is allocated to, the least significant bits of the register (up to the operand type's width) are valid, and any other bits are permitted to contain any arbitrary value. This aligns with the AAPCS64 parameter passing rules.
Our __smp_store_release() implementation does not account for this, and implicitly assumes that operands have been zero-extended to the width of the type being stored to. Thus, we may store unknown values to memory when the value type is narrower than the pointer type (e.g. when storing a char to a long).
This patch fixes the issue by casting the value operand to the same width as the pointer operand in all cases, which ensures that the value is zero-extended as we expect. We use the same union trickery as __smp_load_acquire and {READ,WRITE}_ONCE() to avoid GCC complaining that pointers are potentially cast to narrower width integers in unreachable paths.
A whitespace issue at the top of __smp_store_release() is also corrected.
No changes are necessary for __smp_load_acquire(). Load instructions implicitly clear any upper bits of the register, and the compiler will only consider the least significant bits of the register as valid regardless.
--- arch/arm64/include/asm/barrier.h | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-)
arch/arm64/include/asm/barrier.h +14 -4
@@ -41,23 +41,33 @@#define smp_store_release (p, v) \ do { \ + union { typeof(*p) __val; char __c[1]; } __u = \ + { .__val = (__force typeof(*p)) (v) }; \ compiletime_assert_atomic_type(*p); \ switch (sizeof(*p)) { \ case 1: \ asm volatile ("stlrb %w1, %0" \ - : "=Q" (*p) : "r" (v) : "memory"); \ + : "=Q" (*p) \ + : "r" (*(__u8 *)__u.__c) \ + : "memory"); \ break; \ case 2: \ asm volatile ("stlrh %w1, %0" \ - : "=Q" (*p) : "r" (v) : "memory"); \ + : "=Q" (*p) \ + : "r" (*(__u16 *)__u.__c) \ + : "memory"); \ break; \ case 4: \ asm volatile ("stlr %w1, %0" \ - : "=Q" (*p) : "r" (v) : "memory"); \ + : "=Q" (*p) \ + : "r" (*(__u32 *)__u.__c) \ + : "memory"); \ break; \ case 8: \ asm volatile ("stlr %1, %0" \ - : "=Q" (*p) : "r" (v) : "memory"); \ + : "=Q" (*p) \ + : "r" (*(__u64 *)__u.__c) \ + : "memory"); \ break; \ } \ } while (0)
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.4.72 release. There are 90 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed Jun 14 15:25:30 UTC 2017. Anything received after that time might be too late.
Build results:
total: 145 pass: 145 fail: 0 Qemu test results: total: 115 pass: 115 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.4.72 release. There are 90 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed Jun 14 15:25:30 UTC 2017. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.72-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.4.y
and the diffstat can be found below.thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah