i2c: i801: Add support for Intel Cannon Lake
Subsystems (3)
PATCH 1/1 i2c: i801: Add support for Intel Cannon Lake
From: Srinivas Pandruvada <[email protected]>
Added SMBUS PCI Ids for SMBUS for Cannon Lake PCH.
Signed-off-by Srinivas Pandruvada <[email protected]>
[[email protected]: Add entries to Documentation and Kconfig. Cover Cannon Lake-H too]
Signed-off-by Jarkko Nikula <[email protected]>
--- Documentation/i2c/busses/i2c-i801 | 2 ++ drivers/i2c/busses/Kconfig | 2 ++ drivers/i2c/busses/i2c-i801.c | 8 ++++++++ 3 files changed, 12 insertions(+)
Documentation/i2c/busses/i2c-i801 +2 -0
@@ -34,6 +34,8 @@ Supported adapters: * Intel Broxton (SOC) * Intel Lewisburg (PCH) * Intel Gemini Lake (SOC) + * Intel Cannon Lake-H (PCH) + * Intel Cannon Lake-LP (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller
drivers/i2c/busses/Kconfig +2 -0
@@ -129,6 +129,8 @@ config I2C_I801 Broxton (SOC) Lewisburg (PCH) Gemini Lake (SOC) + Cannon Lake-H (PCH) + Cannon Lake-LP (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801.
drivers/i2c/busses/i2c-i801.c +8 -0
@@ -66,6 +66,8 @@* Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes * Kaby Lake PCH-H (PCH) 0xa2a3 32 hard yes yes yes * Gemini Lake (SOC) 0x31d4 32 hard yes yes yes +* Cannon Lake-H (PCH) 0xa323 32 hard yes yes yes +* Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes * * Features supported by this driver: * Software PEC no
@@ -226,10 +228,12 @@#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23 +#define PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS 0x9da3#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223#define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS 0xa2a3 +#define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS 0xa323struct i801_mux_config {char *gpio_chip;
@@ -1026,6 +1030,8 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS) }, { 0, } };
@@ -1499,6 +1505,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)switch (dev->device) {case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS :case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS : +case PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS : +case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS :case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS :case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS :case PCI_DEVICE_ID_INTEL_DNV_SMBUS :
Signature · 1 line
2.11.0
Wolfram Sang
AppliedQuoted 8 lines · Jarkko Nikula
From: Srinivas Pandruvada <[email protected]>
Added SMBUS PCI Ids for SMBUS for Cannon Lake PCH.
Signed-off-by Srinivas Pandruvada <[email protected]>[[email protected]: Add entries to Documentation and
Kconfig. Cover Cannon Lake-H too]Signed-off-by Jarkko Nikula <[email protected]>
Applied to for-next, thanks!
Quoted 7 lines · Jarkko Nikula
From: Srinivas Pandruvada <[email protected]>
Added SMBUS PCI Ids for SMBUS for Cannon Lake PCH.
Signed-off-by Srinivas Pandruvada <[email protected]>[[email protected]: Add entries to Documentation and
Kconfig. Cover Cannon Lake-H too]
Quoted 7 lines
Signed-off-by Jarkko Nikula <[email protected]>--- Documentation/i2c/busses/i2c-i801 | 2 ++ drivers/i2c/busses/Kconfig | 2 ++ drivers/i2c/busses/i2c-i801.c | 8 ++++++++ 3 files changed, 12 insertions(+)(...)
Sorry, missed that one.
Reviewed-by Jean Delvare <[email protected]>
Signature · 2 lines
Jean Delvare SUSE L3 Support