Skip to contentSkip to conversation

openssh: fix sshd for MIPS64 n32

PATCH New Vicente Olivert Riera 3 participants 3 messages Jun 20, 2017 – Jun 26, 2017

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 openssh: fix sshd for MIPS64 n32

This patch backports two patches that have been sent upstream as a pull request in order to fix sshd for MIPS64 n32.

The first patch adds support for detecting the MIPS ABI during the configure phase.

The second patch sets the right value to seccomp_audit_arch taking into account the MIPS64 ABI.

Currently seccomp_audit_arch is set to AUDIT_ARCH_MIPS64 or AUDIT_ARCH_MIPSEL64 (depending on the endinness) when openssh is built for MIPS64. However, that's only valid for n64 ABI. The right macros for n32 ABI defined in seccomp.h are AUDIT_ARCH_MIPS64N32 and AUDIT_ARCH_MIPSEL64N32, for big and little endian respectively.

Because of that an sshd built for MIPS64 n32 rejects connection attempts and the output of strace reveals that the problem is related to seccomp audit:

[pid 194] prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, {len=57,
filter=0x555d5da0}) = 0
[pid 194] write(7, "\0\0\0]\0\0\0\5\0\0\0Ulist_hostkey_types: "..., 97) = ?
[pid 193] <... poll resumed> ) = 2 ([{fd=5, revents=POLLIN|POLLHUP},
{fd=6, revents=POLLHUP}])
[pid 194] +++ killed by SIGSYS +++

Pull request: https://github.com/openssh/openssh-portable/pull/71

---
 package/openssh/openssh.hash | 2 ++
 package/openssh/openssh.mk   | 6 ++++++
 2 files changed, 8 insertions(+)
package/openssh/openssh.hash +2 -0
index 3685bc0db..ed628fa98 100644
@@ -1,2 +1,4 @@
 # From http://www.openssh.com/txt/release-7.5 (base64 encoded)
 sha256 9846e3c5fab9f0547400b4d2c017992f914222b3fd1f8eee6c7dc6bc5e59f9f0  openssh-7.5p1.tar.gz
+sha256 310860606c4175cdfd095e724f624df27340c89a916f7a09300bcb7988d5cfbf  afc3e31b637db9dae106d4fad78f7b481c8c24e3.patch
+sha256 395aa1006967713b599555440e09f898781a5559e496223587401768ece10904  f4fcd8c788a4854d4ebae400cf55e3957f906835.patch
package/openssh/openssh.mk +6 -0
index 7e197b018..24d34e8d1 100644
@@ -8,6 +8,12 @@ OPENSSH_VERSION = 7.5p1
 OPENSSH_SITE = http://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable
 OPENSSH_LICENSE = BSD-3-Clause, BSD-2-Clause, Public Domain
 OPENSSH_LICENSE_FILES = LICENCE
+# Autoreconf needed due to the following patches modifying configure.ac:
+# f4fcd8c788a4854d4ebae400cf55e3957f906835.patch
+# afc3e31b637db9dae106d4fad78f7b481c8c24e3.patch
+OPENSSH_AUTORECONF = YES
+OPENSSH_PATCH = https://github.com/openssh/openssh-portable/commit/f4fcd8c788a4854d4ebae400cf55e3957f906835.patch \
+	https://github.com/openssh/openssh-portable/commit/afc3e31b637db9dae106d4fad78f7b481c8c24e3.patch
 OPENSSH_CONF_ENV = LD="$(TARGET_CC)" LDFLAGS="$(TARGET_CFLAGS)"
 OPENSSH_CONF_OPTS = \
 	--sysconfdir=/etc/ssh \
Signature · 1 line
2.13.0
#1 lore raw

PATCH 1/1 openssh: fix sshd for MIPS64 n32

Hello,

Quoted 26 lines · Vicente Olivert Riera

This patch backports two patches that have been sent upstream as a pull request in order to fix sshd for MIPS64 n32.

The first patch adds support for detecting the MIPS ABI during the configure phase.

The second patch sets the right value to seccomp_audit_arch taking into account the MIPS64 ABI.

Currently seccomp_audit_arch is set to AUDIT_ARCH_MIPS64 or AUDIT_ARCH_MIPSEL64 (depending on the endinness) when openssh is built for MIPS64. However, that's only valid for n64 ABI. The right macros for n32 ABI defined in seccomp.h are AUDIT_ARCH_MIPS64N32 and AUDIT_ARCH_MIPSEL64N32, for big and little endian respectively.

Because of that an sshd built for MIPS64 n32 rejects connection attempts and the output of strace reveals that the problem is related to seccomp audit:

[pid 194] prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, {len=57,
filter=0x555d5da0}) = 0
[pid 194] write(7, "\0\0\0]\0\0\0\5\0\0\0Ulist_hostkey_types: "..., 97) = ?
[pid 193] <... poll resumed> ) = 2 ([{fd=5, revents=POLLIN|POLLHUP},
{fd=6, revents=POLLHUP}])
[pid 194] +++ killed by SIGSYS +++

Quoted 7 lines

Pull request: https://github.com/openssh/openssh-portable/pull/71

---
 package/openssh/openssh.hash | 2 ++
 package/openssh/openssh.mk   | 6 ++++++
 2 files changed, 8 insertions(+)

Applied to master, thanks.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
#2 lore raw

PATCH 1/1 openssh: fix sshd for MIPS64 n32

In reply to Vicente Olivert Riera
Quoted 28 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Vicente" == Vicente Olivert Riera <[email protected]> writes:

This patch backports two patches that have been sent upstream as a pull request in order to fix sshd for MIPS64 n32.

The first patch adds support for detecting the MIPS ABI during the configure phase.

The second patch sets the right value to seccomp_audit_arch taking into account the MIPS64 ABI.

Currently seccomp_audit_arch is set to AUDIT_ARCH_MIPS64 or AUDIT_ARCH_MIPSEL64 (depending on the endinness) when openssh is built for MIPS64. However, that's only valid for n64 ABI. The right macros for n32 ABI defined in seccomp.h are AUDIT_ARCH_MIPS64N32 and AUDIT_ARCH_MIPSEL64N32, for big and little endian respectively.

Because of that an sshd built for MIPS64 n32 rejects connection attempts and the output of strace reveals that the problem is related to seccomp audit:

[pid 194] prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, {len=57,
filter=0x555d5da0}) = 0
[pid 194] write(7, "\0\0\0]\0\0\0\5\0\0\0Ulist_hostkey_types: "..., 97) = ?
[pid 193] <... poll resumed> ) = 2 ([{fd=5, revents=POLLIN|POLLHUP},
{fd=6, revents=POLLHUP}])
[pid 194] +++ killed by SIGSYS +++

Quoted 3 lines

Pull request: https://github.com/openssh/openssh-portable/pull/71

Committed to 2017.02.x and 2017.05.x, thanks.

Signature · 1 line
Bye, Peter Korsgaard